]>
Commit | Line | Data |
---|---|---|
2f2cc27f YCLP |
1 | Anatop Voltage regulators |
2 | ||
3 | Required properties: | |
4 | - compatible: Must be "fsl,anatop-regulator" | |
5 | - anatop-reg-offset: Anatop MFD register offset | |
6 | - anatop-vol-bit-shift: Bit shift for the register | |
7 | - anatop-vol-bit-width: Number of bits used in the register | |
8 | - anatop-min-bit-val: Minimum value of this register | |
9 | - anatop-min-voltage: Minimum voltage of this regulator | |
10 | - anatop-max-voltage: Maximum voltage of this regulator | |
11 | ||
12 | Any property defined as part of the core regulator | |
13 | binding, defined in regulator.txt, can also be used. | |
14 | ||
15 | Example: | |
16 | ||
17 | regulator-vddpu { | |
18 | compatible = "fsl,anatop-regulator"; | |
19 | regulator-name = "vddpu"; | |
20 | regulator-min-microvolt = <725000>; | |
21 | regulator-max-microvolt = <1300000>; | |
22 | regulator-always-on; | |
23 | anatop-reg-offset = <0x140>; | |
24 | anatop-vol-bit-shift = <9>; | |
25 | anatop-vol-bit-width = <5>; | |
26 | anatop-min-bit-val = <1>; | |
27 | anatop-min-voltage = <725000>; | |
28 | anatop-max-voltage = <1300000>; | |
29 | }; |