]>
Commit | Line | Data |
---|---|---|
cc4637f7 | 1 | // SPDX-License-Identifier: GPL-2.0 |
e88d5ae6 G |
2 | /* |
3 | * Samsung's Exynos5250 based Arndale board device tree source | |
4 | * | |
5 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
6 | * http://www.samsung.com | |
c71335e7 | 7 | */ |
e88d5ae6 G |
8 | |
9 | /dts-v1/; | |
c71335e7 | 10 | #include <dt-bindings/gpio/gpio.h> |
d40f3149 | 11 | #include <dt-bindings/interrupt-controller/irq.h> |
2d7a5bd9 | 12 | #include <dt-bindings/input/input.h> |
c353b80e | 13 | #include <dt-bindings/clock/samsung,s2mps11.h> |
c71335e7 | 14 | #include "exynos5250.dtsi" |
e88d5ae6 G |
15 | |
16 | / { | |
17 | model = "Insignal Arndale evaluation board based on EXYNOS5250"; | |
8bdb31b4 | 18 | compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; |
e88d5ae6 | 19 | |
a0eb1095 | 20 | memory@40000000 { |
12676ee1 | 21 | device_type = "memory"; |
e88d5ae6 G |
22 | reg = <0x40000000 0x80000000>; |
23 | }; | |
24 | ||
25 | chosen { | |
8e0861fd | 26 | stdout-path = "serial2:115200n8"; |
e88d5ae6 G |
27 | }; |
28 | ||
89fec22d TB |
29 | gpio_keys { |
30 | compatible = "gpio-keys"; | |
31 | ||
32 | menu { | |
33 | label = "SW-TACT2"; | |
c71335e7 | 34 | gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 35 | linux,code = <KEY_MENU>; |
36a0282a | 36 | wakeup-source; |
89fec22d TB |
37 | }; |
38 | ||
39 | home { | |
40 | label = "SW-TACT3"; | |
c71335e7 | 41 | gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 42 | linux,code = <KEY_HOME>; |
36a0282a | 43 | wakeup-source; |
89fec22d TB |
44 | }; |
45 | ||
46 | up { | |
47 | label = "SW-TACT4"; | |
c71335e7 | 48 | gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 49 | linux,code = <KEY_UP>; |
36a0282a | 50 | wakeup-source; |
89fec22d TB |
51 | }; |
52 | ||
53 | down { | |
54 | label = "SW-TACT5"; | |
c71335e7 | 55 | gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 56 | linux,code = <KEY_DOWN>; |
36a0282a | 57 | wakeup-source; |
89fec22d TB |
58 | }; |
59 | ||
60 | back { | |
61 | label = "SW-TACT6"; | |
c71335e7 | 62 | gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 63 | linux,code = <KEY_BACK>; |
36a0282a | 64 | wakeup-source; |
89fec22d TB |
65 | }; |
66 | ||
67 | wakeup { | |
68 | label = "SW-TACT7"; | |
c71335e7 | 69 | gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
2d7a5bd9 | 70 | linux,code = <KEY_WAKEUP>; |
36a0282a | 71 | wakeup-source; |
89fec22d TB |
72 | }; |
73 | }; | |
74 | ||
0772cf58 AH |
75 | panel: panel { |
76 | compatible = "boe,hv070wsa-100"; | |
77 | power-supply = <&vcc_3v3_reg>; | |
78 | enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; | |
79 | port { | |
80 | panel_ep: endpoint { | |
81 | remote-endpoint = <&bridge_out_ep>; | |
82 | }; | |
83 | }; | |
84 | }; | |
85 | ||
aa3edb65 MB |
86 | regulators { |
87 | compatible = "simple-bus"; | |
88 | #address-cells = <1>; | |
89 | #size-cells = <0>; | |
90 | ||
8365f763 | 91 | main_dc_reg: regulator@0 { |
c1f2d53f | 92 | compatible = "regulator-fixed"; |
8365f763 | 93 | reg = <0>; |
c1f2d53f MB |
94 | regulator-name = "MAIN_DC"; |
95 | }; | |
96 | ||
8365f763 | 97 | mmc_reg: regulator@1 { |
aa3edb65 | 98 | compatible = "regulator-fixed"; |
8365f763 | 99 | reg = <1>; |
aa3edb65 MB |
100 | regulator-name = "VDD_33ON_2.8V"; |
101 | regulator-min-microvolt = <2800000>; | |
102 | regulator-max-microvolt = <2800000>; | |
04aacc64 | 103 | gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; |
aa3edb65 MB |
104 | enable-active-high; |
105 | }; | |
2988103c | 106 | |
8365f763 | 107 | reg_hdmi_en: regulator@2 { |
aa3edb65 | 108 | compatible = "regulator-fixed"; |
8365f763 | 109 | reg = <2>; |
aa3edb65 MB |
110 | regulator-name = "hdmi-en"; |
111 | }; | |
0772cf58 AH |
112 | |
113 | vcc_1v2_reg: regulator@3 { | |
114 | compatible = "regulator-fixed"; | |
115 | reg = <3>; | |
116 | regulator-name = "VCC_1V2"; | |
117 | regulator-min-microvolt = <1200000>; | |
118 | regulator-max-microvolt = <1200000>; | |
119 | }; | |
120 | ||
121 | vcc_1v8_reg: regulator@4 { | |
122 | compatible = "regulator-fixed"; | |
123 | reg = <4>; | |
124 | regulator-name = "VCC_1V8"; | |
125 | regulator-min-microvolt = <1800000>; | |
126 | regulator-max-microvolt = <1800000>; | |
127 | }; | |
128 | ||
129 | vcc_3v3_reg: regulator@5 { | |
130 | compatible = "regulator-fixed"; | |
131 | reg = <5>; | |
132 | regulator-name = "VCC_3V3"; | |
133 | regulator-min-microvolt = <3300000>; | |
134 | regulator-max-microvolt = <3300000>; | |
135 | }; | |
2d2ff61d SK |
136 | }; |
137 | ||
8b6076d4 TA |
138 | fixed-rate-clocks { |
139 | xxti { | |
140 | compatible = "samsung,clock-xxti"; | |
141 | clock-frequency = <24000000>; | |
142 | }; | |
143 | }; | |
a3093e6f | 144 | |
ceb5b5de AF |
145 | // SMSC USB3503 connected in hardware only mode as a PHY |
146 | usb_hub: usb-hub { | |
147 | compatible = "smsc,usb3503a"; | |
7c1b0ec5 | 148 | |
ceb5b5de AF |
149 | reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
150 | connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; | |
c71335e7 AF |
151 | }; |
152 | }; | |
153 | ||
846c5300 TA |
154 | &cpu0 { |
155 | cpu0-supply = <&buck2_reg>; | |
156 | }; | |
157 | ||
0772cf58 AH |
158 | &dsi_0 { |
159 | vddcore-supply = <&ldo8_reg>; | |
160 | vddio-supply = <&ldo10_reg>; | |
161 | samsung,pll-clock-frequency = <24000000>; | |
162 | samsung,burst-clock-frequency = <320000000>; | |
163 | samsung,esc-clock-frequency = <10000000>; | |
164 | status = "okay"; | |
165 | ||
166 | bridge@0 { | |
167 | reg = <0>; | |
168 | compatible = "toshiba,tc358764"; | |
169 | vddc-supply = <&vcc_1v2_reg>; | |
170 | vddio-supply = <&vcc_1v8_reg>; | |
171 | vddlvds-supply = <&vcc_3v3_reg>; | |
172 | reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; | |
173 | #address-cells = <1>; | |
174 | #size-cells = <0>; | |
175 | port@1 { | |
176 | reg = <1>; | |
177 | bridge_out_ep: endpoint { | |
178 | remote-endpoint = <&panel_ep>; | |
179 | }; | |
180 | }; | |
181 | }; | |
182 | }; | |
183 | ||
c5185068 SP |
184 | &fimd { |
185 | status = "okay"; | |
186 | }; | |
187 | ||
c71335e7 | 188 | &hdmi { |
21cb5a27 AH |
189 | pinctrl-names = "default"; |
190 | pinctrl-0 = <&hdmi_hpd>; | |
e96849e3 | 191 | status = "okay"; |
620375c8 | 192 | ddc = <&i2c_ddc>; |
21cb5a27 | 193 | hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
c71335e7 AF |
194 | vdd_osc-supply = <&ldo10_reg>; |
195 | vdd_pll-supply = <&ldo8_reg>; | |
196 | vdd-supply = <&ldo8_reg>; | |
197 | }; | |
198 | ||
199 | &i2c_0 { | |
200 | status = "okay"; | |
201 | samsung,i2c-sda-delay = <100>; | |
202 | samsung,i2c-max-bus-freq = <20000>; | |
203 | samsung,i2c-slave-addr = <0x66>; | |
204 | ||
205 | s5m8767_pmic@66 { | |
206 | compatible = "samsung,s5m8767-pmic"; | |
207 | reg = <0x66>; | |
208 | interrupt-parent = <&gpx3>; | |
209 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
ef2ecab9 MS |
210 | pinctrl-names = "default"; |
211 | pinctrl-0 = <&s5m8767_irq>; | |
c71335e7 AF |
212 | |
213 | vinb1-supply = <&main_dc_reg>; | |
214 | vinb2-supply = <&main_dc_reg>; | |
215 | vinb3-supply = <&main_dc_reg>; | |
216 | vinb4-supply = <&main_dc_reg>; | |
217 | vinb5-supply = <&main_dc_reg>; | |
218 | vinb6-supply = <&main_dc_reg>; | |
219 | vinb7-supply = <&main_dc_reg>; | |
220 | vinb8-supply = <&main_dc_reg>; | |
221 | vinb9-supply = <&main_dc_reg>; | |
222 | ||
223 | vinl1-supply = <&buck7_reg>; | |
224 | vinl2-supply = <&buck7_reg>; | |
225 | vinl3-supply = <&buck7_reg>; | |
226 | vinl4-supply = <&main_dc_reg>; | |
227 | vinl5-supply = <&main_dc_reg>; | |
228 | vinl6-supply = <&main_dc_reg>; | |
229 | vinl7-supply = <&main_dc_reg>; | |
230 | vinl8-supply = <&buck8_reg>; | |
231 | vinl9-supply = <&buck8_reg>; | |
232 | ||
233 | s5m8767,pmic-buck2-dvs-voltage = <1300000>; | |
234 | s5m8767,pmic-buck3-dvs-voltage = <1100000>; | |
235 | s5m8767,pmic-buck4-dvs-voltage = <1200000>; | |
236 | s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, | |
237 | <&gpd1 1 GPIO_ACTIVE_HIGH>, | |
238 | <&gpd1 2 GPIO_ACTIVE_HIGH>; | |
239 | s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, | |
240 | <&gpx2 4 GPIO_ACTIVE_HIGH>, | |
241 | <&gpx2 5 GPIO_ACTIVE_HIGH>; | |
242 | ||
c353b80e MS |
243 | s5m8767_osc: clocks { |
244 | compatible = "samsung,s5m8767-clk"; | |
245 | #clock-cells = <1>; | |
246 | clock-output-names = "s5m8767_ap", "unused1", "unused2"; | |
247 | }; | |
248 | ||
c71335e7 AF |
249 | regulators { |
250 | ldo1_reg: LDO1 { | |
251 | regulator-name = "VDD_ALIVE_1.0V"; | |
252 | regulator-min-microvolt = <1100000>; | |
253 | regulator-max-microvolt = <1100000>; | |
254 | regulator-always-on; | |
255 | regulator-boot-on; | |
256 | op_mode = <1>; | |
257 | }; | |
258 | ||
259 | ldo2_reg: LDO2 { | |
260 | regulator-name = "VDD_28IO_DP_1.35V"; | |
261 | regulator-min-microvolt = <1200000>; | |
262 | regulator-max-microvolt = <1200000>; | |
263 | regulator-always-on; | |
264 | regulator-boot-on; | |
265 | op_mode = <1>; | |
266 | }; | |
267 | ||
268 | ldo3_reg: LDO3 { | |
269 | regulator-name = "VDD_COMMON1_1.8V"; | |
270 | regulator-min-microvolt = <1800000>; | |
271 | regulator-max-microvolt = <1800000>; | |
272 | regulator-always-on; | |
273 | regulator-boot-on; | |
274 | op_mode = <1>; | |
275 | }; | |
276 | ||
277 | ldo4_reg: LDO4 { | |
278 | regulator-name = "VDD_IOPERI_1.8V"; | |
279 | regulator-min-microvolt = <1800000>; | |
280 | regulator-max-microvolt = <1800000>; | |
281 | regulator-always-on; | |
282 | op_mode = <1>; | |
283 | }; | |
284 | ||
285 | ldo5_reg: LDO5 { | |
286 | regulator-name = "VDD_EXT_1.8V"; | |
287 | regulator-min-microvolt = <1800000>; | |
288 | regulator-max-microvolt = <1800000>; | |
289 | regulator-always-on; | |
290 | regulator-boot-on; | |
291 | op_mode = <1>; | |
292 | }; | |
293 | ||
294 | ldo6_reg: LDO6 { | |
295 | regulator-name = "VDD_MPLL_1.1V"; | |
296 | regulator-min-microvolt = <1100000>; | |
297 | regulator-max-microvolt = <1100000>; | |
298 | regulator-always-on; | |
299 | regulator-boot-on; | |
300 | op_mode = <1>; | |
301 | }; | |
302 | ||
303 | ldo7_reg: LDO7 { | |
304 | regulator-name = "VDD_XPLL_1.1V"; | |
305 | regulator-min-microvolt = <1100000>; | |
306 | regulator-max-microvolt = <1100000>; | |
307 | regulator-always-on; | |
308 | regulator-boot-on; | |
309 | op_mode = <1>; | |
310 | }; | |
311 | ||
312 | ldo8_reg: LDO8 { | |
313 | regulator-name = "VDD_COMMON2_1.0V"; | |
314 | regulator-min-microvolt = <1000000>; | |
315 | regulator-max-microvolt = <1000000>; | |
316 | regulator-always-on; | |
317 | regulator-boot-on; | |
318 | op_mode = <1>; | |
319 | }; | |
320 | ||
321 | ldo9_reg: LDO9 { | |
322 | regulator-name = "VDD_33ON_3.0V"; | |
323 | regulator-min-microvolt = <3000000>; | |
324 | regulator-max-microvolt = <3000000>; | |
325 | op_mode = <1>; | |
326 | }; | |
327 | ||
328 | ldo10_reg: LDO10 { | |
329 | regulator-name = "VDD_COMMON3_1.8V"; | |
330 | regulator-min-microvolt = <1800000>; | |
331 | regulator-max-microvolt = <1800000>; | |
332 | regulator-always-on; | |
333 | regulator-boot-on; | |
334 | op_mode = <1>; | |
335 | }; | |
336 | ||
337 | ldo11_reg: LDO11 { | |
338 | regulator-name = "VDD_ABB2_1.8V"; | |
339 | regulator-min-microvolt = <1800000>; | |
340 | regulator-max-microvolt = <1800000>; | |
341 | regulator-always-on; | |
342 | regulator-boot-on; | |
343 | op_mode = <1>; | |
344 | }; | |
345 | ||
346 | ldo12_reg: LDO12 { | |
347 | regulator-name = "VDD_USB_3.0V"; | |
348 | regulator-min-microvolt = <3000000>; | |
349 | regulator-max-microvolt = <3000000>; | |
350 | regulator-always-on; | |
351 | regulator-boot-on; | |
352 | op_mode = <1>; | |
353 | }; | |
354 | ||
355 | ldo13_reg: LDO13 { | |
356 | regulator-name = "VDDQ_C2C_W_1.8V"; | |
357 | regulator-min-microvolt = <1800000>; | |
358 | regulator-max-microvolt = <1800000>; | |
359 | regulator-always-on; | |
360 | regulator-boot-on; | |
361 | op_mode = <1>; | |
362 | }; | |
363 | ||
364 | ldo14_reg: LDO14 { | |
365 | regulator-name = "VDD18_ABB0_3_1.8V"; | |
366 | regulator-min-microvolt = <1800000>; | |
367 | regulator-max-microvolt = <1800000>; | |
368 | regulator-always-on; | |
369 | regulator-boot-on; | |
370 | op_mode = <1>; | |
371 | }; | |
372 | ||
373 | ldo15_reg: LDO15 { | |
374 | regulator-name = "VDD10_COMMON4_1.0V"; | |
375 | regulator-min-microvolt = <1000000>; | |
376 | regulator-max-microvolt = <1000000>; | |
377 | regulator-always-on; | |
378 | regulator-boot-on; | |
379 | op_mode = <1>; | |
380 | }; | |
381 | ||
382 | ldo16_reg: LDO16 { | |
383 | regulator-name = "VDD18_HSIC_1.8V"; | |
384 | regulator-min-microvolt = <1800000>; | |
385 | regulator-max-microvolt = <1800000>; | |
386 | regulator-always-on; | |
387 | regulator-boot-on; | |
388 | op_mode = <1>; | |
389 | }; | |
390 | ||
391 | ldo17_reg: LDO17 { | |
392 | regulator-name = "VDDQ_MMC2_3_2.8V"; | |
393 | regulator-min-microvolt = <2800000>; | |
394 | regulator-max-microvolt = <2800000>; | |
395 | regulator-always-on; | |
396 | regulator-boot-on; | |
397 | op_mode = <1>; | |
398 | }; | |
399 | ||
400 | ldo18_reg: LDO18 { | |
401 | regulator-name = "VDD_33ON_2.8V"; | |
402 | regulator-min-microvolt = <2800000>; | |
403 | regulator-max-microvolt = <2800000>; | |
404 | op_mode = <1>; | |
405 | }; | |
406 | ||
407 | ldo22_reg: LDO22 { | |
408 | regulator-name = "EXT_33_OFF"; | |
409 | regulator-min-microvolt = <3300000>; | |
410 | regulator-max-microvolt = <3300000>; | |
411 | op_mode = <1>; | |
412 | }; | |
413 | ||
414 | ldo23_reg: LDO23 { | |
415 | regulator-name = "EXT_28_OFF"; | |
416 | regulator-min-microvolt = <2800000>; | |
417 | regulator-max-microvolt = <2800000>; | |
418 | op_mode = <1>; | |
419 | }; | |
420 | ||
421 | ldo25_reg: LDO25 { | |
422 | regulator-name = "PVDD_LDO25"; | |
423 | regulator-min-microvolt = <1200000>; | |
424 | regulator-max-microvolt = <1200000>; | |
425 | op_mode = <1>; | |
426 | }; | |
427 | ||
428 | ldo26_reg: LDO26 { | |
429 | regulator-name = "EXT_18_OFF"; | |
430 | regulator-min-microvolt = <1800000>; | |
431 | regulator-max-microvolt = <1800000>; | |
432 | op_mode = <1>; | |
433 | }; | |
434 | ||
435 | buck1_reg: BUCK1 { | |
436 | regulator-name = "vdd_mif"; | |
437 | regulator-min-microvolt = <950000>; | |
438 | regulator-max-microvolt = <1200000>; | |
439 | regulator-always-on; | |
440 | regulator-boot-on; | |
441 | op_mode = <1>; | |
442 | }; | |
443 | ||
444 | buck2_reg: BUCK2 { | |
445 | regulator-name = "vdd_arm"; | |
446 | regulator-min-microvolt = <912500>; | |
447 | regulator-max-microvolt = <1300000>; | |
448 | regulator-always-on; | |
449 | regulator-boot-on; | |
450 | op_mode = <1>; | |
451 | }; | |
452 | ||
453 | buck3_reg: BUCK3 { | |
454 | regulator-name = "vdd_int"; | |
455 | regulator-min-microvolt = <900000>; | |
456 | regulator-max-microvolt = <1200000>; | |
457 | regulator-always-on; | |
458 | regulator-boot-on; | |
459 | op_mode = <1>; | |
460 | }; | |
461 | ||
462 | buck4_reg: BUCK4 { | |
463 | regulator-name = "vdd_g3d"; | |
464 | regulator-min-microvolt = <1000000>; | |
465 | regulator-max-microvolt = <1000000>; | |
466 | regulator-always-on; | |
467 | regulator-boot-on; | |
468 | op_mode = <1>; | |
469 | }; | |
470 | ||
471 | buck5_reg: BUCK5 { | |
472 | regulator-name = "VDD_MEM_1.35V"; | |
473 | regulator-min-microvolt = <750000>; | |
474 | regulator-max-microvolt = <1355000>; | |
475 | regulator-always-on; | |
476 | regulator-boot-on; | |
477 | op_mode = <1>; | |
478 | }; | |
479 | ||
480 | buck7_reg: BUCK7 { | |
481 | regulator-name = "PVDD_BUCK7"; | |
482 | regulator-always-on; | |
483 | op_mode = <1>; | |
484 | }; | |
485 | ||
486 | buck8_reg: BUCK8 { | |
487 | regulator-name = "PVDD_BUCK8"; | |
488 | regulator-always-on; | |
489 | op_mode = <1>; | |
490 | }; | |
491 | ||
492 | buck9_reg: BUCK9 { | |
493 | regulator-name = "VDD_33_OFF_EXT1"; | |
494 | regulator-min-microvolt = <750000>; | |
495 | regulator-max-microvolt = <3000000>; | |
496 | op_mode = <1>; | |
497 | }; | |
7c1b0ec5 MB |
498 | }; |
499 | }; | |
e88d5ae6 | 500 | }; |
c71335e7 | 501 | |
c71335e7 AF |
502 | &i2c_3 { |
503 | status = "okay"; | |
504 | ||
505 | wm1811a@1a { | |
506 | compatible = "wlf,wm1811"; | |
507 | reg = <0x1a>; | |
508 | ||
509 | AVDD2-supply = <&main_dc_reg>; | |
510 | CPVDD-supply = <&main_dc_reg>; | |
511 | DBVDD1-supply = <&main_dc_reg>; | |
512 | DBVDD2-supply = <&main_dc_reg>; | |
513 | DBVDD3-supply = <&main_dc_reg>; | |
514 | LDO1VDD-supply = <&main_dc_reg>; | |
515 | SPKVDD1-supply = <&main_dc_reg>; | |
516 | SPKVDD2-supply = <&main_dc_reg>; | |
517 | ||
518 | wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; | |
519 | wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; | |
520 | }; | |
521 | }; | |
522 | ||
523 | &i2c_8 { | |
524 | status = "okay"; | |
c55af083 | 525 | /* used by HDMI PHY */ |
c71335e7 AF |
526 | samsung,i2c-sda-delay = <100>; |
527 | samsung,i2c-max-bus-freq = <66000>; | |
c71335e7 AF |
528 | }; |
529 | ||
530 | &i2c_9 { | |
531 | status = "okay"; | |
532 | samsung,i2c-sda-delay = <100>; | |
533 | samsung,i2c-max-bus-freq = <40000>; | |
534 | samsung,i2c-slave-addr = <0x38>; | |
535 | ||
536 | sata_phy_i2c:sata-phy@38 { | |
537 | compatible = "samsung,exynos-sataphy-i2c"; | |
538 | reg = <0x38>; | |
539 | }; | |
540 | }; | |
541 | ||
542 | &i2s0 { | |
543 | status = "okay"; | |
544 | }; | |
545 | ||
e96849e3 MS |
546 | &mixer { |
547 | status = "okay"; | |
548 | }; | |
549 | ||
c71335e7 AF |
550 | &mmc_0 { |
551 | status = "okay"; | |
c71335e7 AF |
552 | broken-cd; |
553 | card-detect-delay = <200>; | |
554 | samsung,dw-mshc-ciu-div = <3>; | |
555 | samsung,dw-mshc-sdr-timing = <2 3>; | |
556 | samsung,dw-mshc-ddr-timing = <1 2>; | |
557 | vmmc-supply = <&mmc_reg>; | |
558 | pinctrl-names = "default"; | |
559 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; | |
560 | bus-width = <8>; | |
561 | cap-mmc-highspeed; | |
562 | }; | |
563 | ||
564 | &mmc_2 { | |
565 | status = "okay"; | |
c71335e7 AF |
566 | card-detect-delay = <200>; |
567 | samsung,dw-mshc-ciu-div = <3>; | |
568 | samsung,dw-mshc-sdr-timing = <2 3>; | |
569 | samsung,dw-mshc-ddr-timing = <1 2>; | |
570 | vmmc-supply = <&mmc_reg>; | |
571 | pinctrl-names = "default"; | |
572 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; | |
573 | bus-width = <4>; | |
574 | disable-wp; | |
575 | cap-sd-highspeed; | |
576 | }; | |
577 | ||
ef2ecab9 MS |
578 | &pinctrl_0 { |
579 | s5m8767_irq: s5m8767-irq { | |
580 | samsung,pins = "gpx3-2"; | |
581 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
582 | }; | |
583 | }; | |
584 | ||
c71335e7 | 585 | &rtc { |
c353b80e MS |
586 | clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; |
587 | clock-names = "rtc", "rtc_src"; | |
c71335e7 AF |
588 | status = "okay"; |
589 | }; | |
590 | ||
591 | &sata { | |
592 | status = "okay"; | |
593 | }; | |
594 | ||
595 | &sata_phy { | |
596 | status = "okay"; | |
597 | samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; | |
598 | }; | |
620375c8 AH |
599 | |
600 | &soc { | |
601 | /* | |
602 | * For unknown reasons HDMI-DDC does not work with Exynos I2C | |
603 | * controllers. Lets use software I2C over GPIO pins as a workaround. | |
604 | */ | |
605 | i2c_ddc: i2c-gpio { | |
606 | pinctrl-names = "default"; | |
607 | pinctrl-0 = <&i2c2_gpio_bus>; | |
608 | status = "okay"; | |
609 | compatible = "i2c-gpio"; | |
610 | gpios = <&gpa0 6 0 /* sda */ | |
611 | &gpa0 7 0 /* scl */ | |
612 | >; | |
613 | i2c-gpio,delay-us = <2>; | |
614 | #address-cells = <1>; | |
615 | #size-cells = <0>; | |
616 | }; | |
617 | }; |