]>
Commit | Line | Data |
---|---|---|
5658a68f SH |
1 | /* |
2 | * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | */ | |
11 | ||
12de44f5 | 12 | #include <dt-bindings/gpio/gpio.h> |
f4db4bc5 | 13 | #include "imx25-pinfunc.h" |
5658a68f SH |
14 | |
15 | / { | |
7f107887 FE |
16 | #address-cells = <1>; |
17 | #size-cells = <1>; | |
a971c554 FE |
18 | /* |
19 | * The decompressor and also some bootloaders rely on a | |
20 | * pre-existing /chosen node to be available to insert the | |
21 | * command line and merge other ATAGS info. | |
22 | * Also for U-Boot there must be a pre-existing /memory node. | |
23 | */ | |
24 | chosen {}; | |
25 | memory { device_type = "memory"; reg = <0 0>; }; | |
7f107887 | 26 | |
5658a68f | 27 | aliases { |
22970070 | 28 | ethernet0 = &fec; |
6ed1a0e5 SH |
29 | gpio0 = &gpio1; |
30 | gpio1 = &gpio2; | |
31 | gpio2 = &gpio3; | |
32 | gpio3 = &gpio4; | |
33 | i2c0 = &i2c1; | |
34 | i2c1 = &i2c2; | |
35 | i2c2 = &i2c3; | |
9e3a424b SH |
36 | mmc0 = &esdhc1; |
37 | mmc1 = &esdhc2; | |
70f97128 MKB |
38 | pwm0 = &pwm1; |
39 | pwm1 = &pwm2; | |
40 | pwm2 = &pwm3; | |
41 | pwm3 = &pwm4; | |
5658a68f SH |
42 | serial0 = &uart1; |
43 | serial1 = &uart2; | |
44 | serial2 = &uart3; | |
45 | serial3 = &uart4; | |
46 | serial4 = &uart5; | |
6ed1a0e5 SH |
47 | spi0 = &spi1; |
48 | spi1 = &spi2; | |
49 | spi2 = &spi3; | |
5658a68f SH |
50 | usb0 = &usbotg; |
51 | usb1 = &usbhost1; | |
52 | }; | |
53 | ||
070bd7e4 | 54 | cpus { |
d447dd88 | 55 | #address-cells = <1>; |
070bd7e4 FE |
56 | #size-cells = <0>; |
57 | ||
d447dd88 | 58 | cpu@0 { |
070bd7e4 FE |
59 | compatible = "arm,arm926ej-s"; |
60 | device_type = "cpu"; | |
d447dd88 | 61 | reg = <0>; |
070bd7e4 FE |
62 | }; |
63 | }; | |
64 | ||
5658a68f SH |
65 | asic: asic-interrupt-controller@68000000 { |
66 | compatible = "fsl,imx25-asic", "fsl,avic"; | |
67 | interrupt-controller; | |
68 | #interrupt-cells = <1>; | |
69 | reg = <0x68000000 0x8000000>; | |
70 | }; | |
71 | ||
72 | clocks { | |
73 | #address-cells = <1>; | |
74 | #size-cells = <0>; | |
75 | ||
76 | osc { | |
77 | compatible = "fsl,imx-osc", "fixed-clock"; | |
4b2b4043 | 78 | #clock-cells = <0>; |
5658a68f SH |
79 | clock-frequency = <24000000>; |
80 | }; | |
81 | }; | |
82 | ||
83 | soc { | |
84 | #address-cells = <1>; | |
85 | #size-cells = <1>; | |
86 | compatible = "simple-bus"; | |
87 | interrupt-parent = <&asic>; | |
88 | ranges; | |
89 | ||
90 | aips@43f00000 { /* AIPS1 */ | |
91 | compatible = "fsl,aips-bus", "simple-bus"; | |
92 | #address-cells = <1>; | |
93 | #size-cells = <1>; | |
94 | reg = <0x43f00000 0x100000>; | |
95 | ranges; | |
96 | ||
c33576cb MK |
97 | aips1: bridge@43f00000 { |
98 | compatible = "fsl,imx25-aips"; | |
99 | reg = <0x43f00000 0x4000>; | |
100 | }; | |
101 | ||
5658a68f SH |
102 | i2c1: i2c@43f80000 { |
103 | #address-cells = <1>; | |
104 | #size-cells = <0>; | |
105 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; | |
106 | reg = <0x43f80000 0x4000>; | |
107 | clocks = <&clks 48>; | |
108 | clock-names = ""; | |
109 | interrupts = <3>; | |
110 | status = "disabled"; | |
111 | }; | |
112 | ||
113 | i2c3: i2c@43f84000 { | |
114 | #address-cells = <1>; | |
115 | #size-cells = <0>; | |
116 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; | |
117 | reg = <0x43f84000 0x4000>; | |
118 | clocks = <&clks 48>; | |
119 | clock-names = ""; | |
120 | interrupts = <10>; | |
121 | status = "disabled"; | |
122 | }; | |
123 | ||
124 | can1: can@43f88000 { | |
125 | compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; | |
126 | reg = <0x43f88000 0x4000>; | |
127 | interrupts = <43>; | |
128 | clocks = <&clks 75>, <&clks 75>; | |
129 | clock-names = "ipg", "per"; | |
130 | status = "disabled"; | |
131 | }; | |
132 | ||
133 | can2: can@43f8c000 { | |
134 | compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; | |
135 | reg = <0x43f8c000 0x4000>; | |
136 | interrupts = <44>; | |
137 | clocks = <&clks 76>, <&clks 76>; | |
138 | clock-names = "ipg", "per"; | |
139 | status = "disabled"; | |
140 | }; | |
141 | ||
142 | uart1: serial@43f90000 { | |
143 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; | |
144 | reg = <0x43f90000 0x4000>; | |
145 | interrupts = <45>; | |
146 | clocks = <&clks 120>, <&clks 57>; | |
147 | clock-names = "ipg", "per"; | |
148 | status = "disabled"; | |
149 | }; | |
150 | ||
151 | uart2: serial@43f94000 { | |
152 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; | |
153 | reg = <0x43f94000 0x4000>; | |
154 | interrupts = <32>; | |
155 | clocks = <&clks 121>, <&clks 57>; | |
156 | clock-names = "ipg", "per"; | |
157 | status = "disabled"; | |
158 | }; | |
159 | ||
160 | i2c2: i2c@43f98000 { | |
161 | #address-cells = <1>; | |
162 | #size-cells = <0>; | |
163 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; | |
164 | reg = <0x43f98000 0x4000>; | |
165 | clocks = <&clks 48>; | |
166 | clock-names = ""; | |
167 | interrupts = <4>; | |
168 | status = "disabled"; | |
169 | }; | |
170 | ||
171 | owire@43f9c000 { | |
172 | #address-cells = <1>; | |
173 | #size-cells = <0>; | |
174 | reg = <0x43f9c000 0x4000>; | |
175 | clocks = <&clks 51>; | |
176 | clock-names = ""; | |
177 | interrupts = <2>; | |
178 | status = "disabled"; | |
179 | }; | |
180 | ||
181 | spi1: cspi@43fa4000 { | |
182 | #address-cells = <1>; | |
183 | #size-cells = <0>; | |
184 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; | |
185 | reg = <0x43fa4000 0x4000>; | |
7a87e9cb | 186 | clocks = <&clks 78>, <&clks 78>; |
37523dc5 | 187 | clock-names = "ipg", "per"; |
5658a68f SH |
188 | interrupts = <14>; |
189 | status = "disabled"; | |
190 | }; | |
191 | ||
9223dd87 | 192 | kpp: kpp@43fa8000 { |
5658a68f SH |
193 | #address-cells = <1>; |
194 | #size-cells = <0>; | |
9223dd87 | 195 | compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; |
5658a68f SH |
196 | reg = <0x43fa8000 0x4000>; |
197 | clocks = <&clks 102>; | |
198 | clock-names = ""; | |
199 | interrupts = <24>; | |
200 | status = "disabled"; | |
201 | }; | |
202 | ||
53110aa0 | 203 | iomuxc: iomuxc@43fac000 { |
5658a68f SH |
204 | compatible = "fsl,imx25-iomuxc"; |
205 | reg = <0x43fac000 0x4000>; | |
206 | }; | |
207 | ||
ec2ea8c1 | 208 | audmux: audmux@43fb0000 { |
5658a68f SH |
209 | compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; |
210 | reg = <0x43fb0000 0x4000>; | |
211 | status = "disabled"; | |
212 | }; | |
213 | }; | |
214 | ||
215 | spba@50000000 { | |
216 | compatible = "fsl,spba-bus", "simple-bus"; | |
217 | #address-cells = <1>; | |
218 | #size-cells = <1>; | |
219 | reg = <0x50000000 0x40000>; | |
220 | ranges; | |
221 | ||
222 | spi3: cspi@50004000 { | |
223 | #address-cells = <1>; | |
224 | #size-cells = <0>; | |
225 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; | |
226 | reg = <0x50004000 0x4000>; | |
227 | interrupts = <0>; | |
37523dc5 JA |
228 | clocks = <&clks 80>, <&clks 80>; |
229 | clock-names = "ipg", "per"; | |
5658a68f SH |
230 | status = "disabled"; |
231 | }; | |
232 | ||
233 | uart4: serial@50008000 { | |
234 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; | |
235 | reg = <0x50008000 0x4000>; | |
236 | interrupts = <5>; | |
237 | clocks = <&clks 123>, <&clks 57>; | |
238 | clock-names = "ipg", "per"; | |
239 | status = "disabled"; | |
240 | }; | |
241 | ||
242 | uart3: serial@5000c000 { | |
243 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; | |
244 | reg = <0x5000c000 0x4000>; | |
245 | interrupts = <18>; | |
246 | clocks = <&clks 122>, <&clks 57>; | |
247 | clock-names = "ipg", "per"; | |
248 | status = "disabled"; | |
249 | }; | |
250 | ||
251 | spi2: cspi@50010000 { | |
252 | #address-cells = <1>; | |
253 | #size-cells = <0>; | |
254 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; | |
255 | reg = <0x50010000 0x4000>; | |
37523dc5 JA |
256 | clocks = <&clks 79>, <&clks 79>; |
257 | clock-names = "ipg", "per"; | |
5658a68f SH |
258 | interrupts = <13>; |
259 | status = "disabled"; | |
260 | }; | |
261 | ||
262 | ssi2: ssi@50014000 { | |
6ff7f51e | 263 | #sound-dai-cells = <0>; |
5658a68f SH |
264 | compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
265 | reg = <0x50014000 0x4000>; | |
266 | interrupts = <11>; | |
7803c620 DC |
267 | clocks = <&clks 118>; |
268 | clock-names = "ipg"; | |
269 | dmas = <&sdma 24 1 0>, | |
270 | <&sdma 25 1 0>; | |
271 | dma-names = "rx", "tx"; | |
5658a68f SH |
272 | status = "disabled"; |
273 | }; | |
274 | ||
275 | esai@50018000 { | |
276 | reg = <0x50018000 0x4000>; | |
277 | interrupts = <7>; | |
278 | }; | |
279 | ||
280 | uart5: serial@5002c000 { | |
281 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; | |
282 | reg = <0x5002c000 0x4000>; | |
283 | interrupts = <40>; | |
284 | clocks = <&clks 124>, <&clks 57>; | |
285 | clock-names = "ipg", "per"; | |
286 | status = "disabled"; | |
287 | }; | |
288 | ||
92f651f3 DC |
289 | tscadc: tscadc@50030000 { |
290 | compatible = "fsl,imx25-tsadc"; | |
291 | reg = <0x50030000 0xc>; | |
5658a68f SH |
292 | interrupts = <46>; |
293 | clocks = <&clks 119>; | |
294 | clock-names = "ipg"; | |
92f651f3 DC |
295 | interrupt-controller; |
296 | #interrupt-cells = <1>; | |
297 | #address-cells = <1>; | |
298 | #size-cells = <1>; | |
5658a68f | 299 | status = "disabled"; |
92f651f3 DC |
300 | |
301 | adc: adc@50030800 { | |
302 | compatible = "fsl,imx25-gcq"; | |
303 | reg = <0x50030800 0x60>; | |
304 | interrupt-parent = <&tscadc>; | |
305 | interrupts = <1>; | |
306 | #address-cells = <1>; | |
307 | #size-cells = <0>; | |
308 | status = "disabled"; | |
309 | }; | |
310 | ||
311 | tsc: tcq@50030400 { | |
312 | compatible = "fsl,imx25-tcq"; | |
313 | reg = <0x50030400 0x60>; | |
314 | interrupt-parent = <&tscadc>; | |
315 | interrupts = <0>; | |
316 | fsl,wires = <4>; | |
317 | status = "disabled"; | |
318 | }; | |
5658a68f SH |
319 | }; |
320 | ||
321 | ssi1: ssi@50034000 { | |
6ff7f51e | 322 | #sound-dai-cells = <0>; |
5658a68f SH |
323 | compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
324 | reg = <0x50034000 0x4000>; | |
325 | interrupts = <12>; | |
7803c620 DC |
326 | clocks = <&clks 117>; |
327 | clock-names = "ipg"; | |
328 | dmas = <&sdma 28 1 0>, | |
329 | <&sdma 29 1 0>; | |
330 | dma-names = "rx", "tx"; | |
5658a68f SH |
331 | status = "disabled"; |
332 | }; | |
333 | ||
334 | fec: ethernet@50038000 { | |
335 | compatible = "fsl,imx25-fec"; | |
336 | reg = <0x50038000 0x4000>; | |
337 | interrupts = <57>; | |
338 | clocks = <&clks 88>, <&clks 65>; | |
339 | clock-names = "ipg", "ahb"; | |
340 | status = "disabled"; | |
341 | }; | |
342 | }; | |
343 | ||
344 | aips@53f00000 { /* AIPS2 */ | |
345 | compatible = "fsl,aips-bus", "simple-bus"; | |
346 | #address-cells = <1>; | |
347 | #size-cells = <1>; | |
348 | reg = <0x53f00000 0x100000>; | |
349 | ranges; | |
350 | ||
c33576cb MK |
351 | aips2: bridge@53f00000 { |
352 | compatible = "fsl,imx25-aips"; | |
353 | reg = <0x53f00000 0x4000>; | |
354 | }; | |
355 | ||
5658a68f SH |
356 | clks: ccm@53f80000 { |
357 | compatible = "fsl,imx25-ccm"; | |
358 | reg = <0x53f80000 0x4000>; | |
359 | interrupts = <31>; | |
360 | #clock-cells = <1>; | |
361 | }; | |
362 | ||
363 | gpt4: timer@53f84000 { | |
364 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; | |
365 | reg = <0x53f84000 0x4000>; | |
5363dcab | 366 | clocks = <&clks 95>, <&clks 47>; |
5658a68f SH |
367 | clock-names = "ipg", "per"; |
368 | interrupts = <1>; | |
369 | }; | |
370 | ||
371 | gpt3: timer@53f88000 { | |
372 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; | |
373 | reg = <0x53f88000 0x4000>; | |
5363dcab | 374 | clocks = <&clks 94>, <&clks 47>; |
5658a68f SH |
375 | clock-names = "ipg", "per"; |
376 | interrupts = <29>; | |
377 | }; | |
378 | ||
379 | gpt2: timer@53f8c000 { | |
380 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; | |
381 | reg = <0x53f8c000 0x4000>; | |
5363dcab | 382 | clocks = <&clks 93>, <&clks 47>; |
5658a68f SH |
383 | clock-names = "ipg", "per"; |
384 | interrupts = <53>; | |
385 | }; | |
386 | ||
387 | gpt1: timer@53f90000 { | |
388 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; | |
389 | reg = <0x53f90000 0x4000>; | |
5363dcab | 390 | clocks = <&clks 92>, <&clks 47>; |
5658a68f SH |
391 | clock-names = "ipg", "per"; |
392 | interrupts = <54>; | |
393 | }; | |
394 | ||
395 | epit1: timer@53f94000 { | |
396 | compatible = "fsl,imx25-epit"; | |
397 | reg = <0x53f94000 0x4000>; | |
398 | interrupts = <28>; | |
399 | }; | |
400 | ||
401 | epit2: timer@53f98000 { | |
402 | compatible = "fsl,imx25-epit"; | |
403 | reg = <0x53f98000 0x4000>; | |
404 | interrupts = <27>; | |
405 | }; | |
406 | ||
407 | gpio4: gpio@53f9c000 { | |
408 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; | |
409 | reg = <0x53f9c000 0x4000>; | |
410 | interrupts = <23>; | |
411 | gpio-controller; | |
412 | #gpio-cells = <2>; | |
413 | interrupt-controller; | |
414 | #interrupt-cells = <2>; | |
415 | }; | |
416 | ||
417 | pwm2: pwm@53fa0000 { | |
418 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | |
419 | #pwm-cells = <2>; | |
420 | reg = <0x53fa0000 0x4000>; | |
7ecd0bde | 421 | clocks = <&clks 106>, <&clks 52>; |
5658a68f SH |
422 | clock-names = "ipg", "per"; |
423 | interrupts = <36>; | |
424 | }; | |
425 | ||
426 | gpio3: gpio@53fa4000 { | |
427 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; | |
428 | reg = <0x53fa4000 0x4000>; | |
429 | interrupts = <16>; | |
430 | gpio-controller; | |
431 | #gpio-cells = <2>; | |
432 | interrupt-controller; | |
433 | #interrupt-cells = <2>; | |
434 | }; | |
435 | ||
436 | pwm3: pwm@53fa8000 { | |
437 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | |
438 | #pwm-cells = <2>; | |
439 | reg = <0x53fa8000 0x4000>; | |
7ecd0bde | 440 | clocks = <&clks 107>, <&clks 52>; |
5658a68f SH |
441 | clock-names = "ipg", "per"; |
442 | interrupts = <41>; | |
443 | }; | |
444 | ||
ba97eed2 ST |
445 | scc: crypto@53fac000 { |
446 | compatible = "fsl,imx25-scc"; | |
447 | reg = <0x53fac000 0x4000>; | |
448 | clocks = <&clks 111>; | |
449 | clock-names = "ipg"; | |
450 | interrupts = <49>, <50>; | |
451 | interrupt-names = "scm", "smn"; | |
452 | }; | |
453 | ||
5658a68f SH |
454 | esdhc1: esdhc@53fb4000 { |
455 | compatible = "fsl,imx25-esdhc"; | |
456 | reg = <0x53fb4000 0x4000>; | |
457 | interrupts = <9>; | |
458 | clocks = <&clks 86>, <&clks 63>, <&clks 45>; | |
459 | clock-names = "ipg", "ahb", "per"; | |
460 | status = "disabled"; | |
461 | }; | |
462 | ||
463 | esdhc2: esdhc@53fb8000 { | |
464 | compatible = "fsl,imx25-esdhc"; | |
465 | reg = <0x53fb8000 0x4000>; | |
466 | interrupts = <8>; | |
467 | clocks = <&clks 87>, <&clks 64>, <&clks 46>; | |
468 | clock-names = "ipg", "ahb", "per"; | |
469 | status = "disabled"; | |
470 | }; | |
471 | ||
c770f7c0 MW |
472 | lcdc: lcdc@53fbc000 { |
473 | compatible = "fsl,imx25-fb", "fsl,imx21-fb"; | |
5658a68f SH |
474 | reg = <0x53fbc000 0x4000>; |
475 | interrupts = <39>; | |
476 | clocks = <&clks 103>, <&clks 66>, <&clks 49>; | |
477 | clock-names = "ipg", "ahb", "per"; | |
478 | status = "disabled"; | |
479 | }; | |
480 | ||
481 | slcdc@53fc0000 { | |
482 | reg = <0x53fc0000 0x4000>; | |
483 | interrupts = <38>; | |
484 | status = "disabled"; | |
485 | }; | |
486 | ||
487 | pwm4: pwm@53fc8000 { | |
488 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | |
f90d3f0d | 489 | #pwm-cells = <2>; |
5658a68f | 490 | reg = <0x53fc8000 0x4000>; |
7ecd0bde | 491 | clocks = <&clks 108>, <&clks 52>; |
5658a68f SH |
492 | clock-names = "ipg", "per"; |
493 | interrupts = <42>; | |
494 | }; | |
495 | ||
496 | gpio1: gpio@53fcc000 { | |
497 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; | |
498 | reg = <0x53fcc000 0x4000>; | |
499 | interrupts = <52>; | |
500 | gpio-controller; | |
501 | #gpio-cells = <2>; | |
502 | interrupt-controller; | |
503 | #interrupt-cells = <2>; | |
504 | }; | |
505 | ||
506 | gpio2: gpio@53fd0000 { | |
507 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; | |
508 | reg = <0x53fd0000 0x4000>; | |
509 | interrupts = <51>; | |
510 | gpio-controller; | |
511 | #gpio-cells = <2>; | |
512 | interrupt-controller; | |
513 | #interrupt-cells = <2>; | |
514 | }; | |
515 | ||
7803c620 | 516 | sdma: sdma@53fd4000 { |
0f429057 | 517 | compatible = "fsl,imx25-sdma"; |
5658a68f SH |
518 | reg = <0x53fd4000 0x4000>; |
519 | clocks = <&clks 112>, <&clks 68>; | |
520 | clock-names = "ipg", "ahb"; | |
fb72bb21 | 521 | #dma-cells = <3>; |
5658a68f | 522 | interrupts = <34>; |
cabd1b29 | 523 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; |
5658a68f SH |
524 | }; |
525 | ||
526 | wdog@53fdc000 { | |
527 | compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; | |
528 | reg = <0x53fdc000 0x4000>; | |
529 | clocks = <&clks 126>; | |
530 | clock-names = ""; | |
531 | interrupts = <55>; | |
532 | }; | |
533 | ||
534 | pwm1: pwm@53fe0000 { | |
535 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | |
536 | #pwm-cells = <2>; | |
537 | reg = <0x53fe0000 0x4000>; | |
7ecd0bde | 538 | clocks = <&clks 105>, <&clks 52>; |
5658a68f SH |
539 | clock-names = "ipg", "per"; |
540 | interrupts = <26>; | |
541 | }; | |
542 | ||
684f6a23 SH |
543 | iim: iim@53ff0000 { |
544 | compatible = "fsl,imx25-iim", "fsl,imx27-iim"; | |
545 | reg = <0x53ff0000 0x4000>; | |
546 | interrupts = <19>; | |
547 | clocks = <&clks 99>; | |
548 | }; | |
549 | ||
5658a68f SH |
550 | usbotg: usb@53ff4000 { |
551 | compatible = "fsl,imx25-usb", "fsl,imx27-usb"; | |
552 | reg = <0x53ff4000 0x0200>; | |
553 | interrupts = <37>; | |
1b8d1ea9 PC |
554 | clocks = <&clks 9>, <&clks 70>, <&clks 8>; |
555 | clock-names = "ipg", "ahb", "per"; | |
5658a68f | 556 | fsl,usbmisc = <&usbmisc 0>; |
f415153c | 557 | fsl,usbphy = <&usbphy0>; |
10ad0dda UKK |
558 | phy_type = "utmi"; |
559 | dr_mode = "otg"; | |
5658a68f SH |
560 | status = "disabled"; |
561 | }; | |
562 | ||
563 | usbhost1: usb@53ff4400 { | |
564 | compatible = "fsl,imx25-usb", "fsl,imx27-usb"; | |
565 | reg = <0x53ff4400 0x0200>; | |
566 | interrupts = <35>; | |
1b8d1ea9 PC |
567 | clocks = <&clks 9>, <&clks 70>, <&clks 8>; |
568 | clock-names = "ipg", "ahb", "per"; | |
5658a68f | 569 | fsl,usbmisc = <&usbmisc 1>; |
f415153c | 570 | fsl,usbphy = <&usbphy1>; |
5658a68f SH |
571 | status = "disabled"; |
572 | }; | |
573 | ||
574 | usbmisc: usbmisc@53ff4600 { | |
575 | #index-cells = <1>; | |
576 | compatible = "fsl,imx25-usbmisc"; | |
5658a68f | 577 | reg = <0x53ff4600 0x00f>; |
5658a68f SH |
578 | }; |
579 | ||
580 | dryice@53ffc000 { | |
581 | compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; | |
582 | reg = <0x53ffc000 0x4000>; | |
583 | clocks = <&clks 81>; | |
584 | clock-names = "ipg"; | |
f082bbff | 585 | interrupts = <25 56>; |
5658a68f SH |
586 | }; |
587 | }; | |
588 | ||
41707314 SH |
589 | iram: sram@78000000 { |
590 | compatible = "mmio-sram"; | |
591 | reg = <0x78000000 0x20000>; | |
592 | }; | |
593 | ||
5658a68f SH |
594 | emi@80000000 { |
595 | compatible = "fsl,emi-bus", "simple-bus"; | |
596 | #address-cells = <1>; | |
597 | #size-cells = <1>; | |
598 | reg = <0x80000000 0x3b002000>; | |
599 | ranges; | |
600 | ||
be4ccfce | 601 | nfc: nand@bb000000 { |
5658a68f SH |
602 | #address-cells = <1>; |
603 | #size-cells = <1>; | |
604 | ||
605 | compatible = "fsl,imx25-nand"; | |
606 | reg = <0xbb000000 0x2000>; | |
607 | clocks = <&clks 50>; | |
608 | clock-names = ""; | |
609 | interrupts = <33>; | |
610 | status = "disabled"; | |
611 | }; | |
612 | }; | |
613 | }; | |
f415153c FE |
614 | |
615 | usbphy { | |
616 | compatible = "simple-bus"; | |
617 | #address-cells = <1>; | |
618 | #size-cells = <0>; | |
619 | ||
620 | usbphy0: usb-phy@0 { | |
621 | reg = <0>; | |
622 | compatible = "usb-nop-xceiv"; | |
623 | }; | |
624 | ||
625 | usbphy1: usb-phy@1 { | |
626 | reg = <1>; | |
627 | compatible = "usb-nop-xceiv"; | |
628 | }; | |
629 | }; | |
5658a68f | 630 | }; |