[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / r8a7793-gose.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Gose board
 *
 * Copyright (C) 2014-2015 Renesas Electronics Corporation
 */

/*
 * SSI-AK4643
 *
 * SW1: 1: AK4643
 *      2: CN22
 *      3: ADV7511
 *
 * This command is required when Playback/Capture
 *
 *	amixer set "LINEOUT Mixer DACL" on
 *	amixer set "DVC Out" 100%
 *	amixer set "DVC In" 100%
 *
 * You can use Mute
 *
 *	amixer set "DVC Out Mute" on
 *	amixer set "DVC In Mute" on
 *
 * You can use Volume Ramp
 *
 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 *	amixer set "DVC Out Ramp" on
 *	aplay xxx.wav &
 *	amixer set "DVC Out"  80%  // Volume Down
 *	amixer set "DVC Out" 100%  // Volume Up
 */

/dts-v1/;
#include "r8a7793.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Gose";
	compatible = "renesas,gose", "renesas,r8a7793";

	aliases {
		serial0 = &scif0;
		serial1 = &scif1;
		i2c9 = &gpioi2c2;
		i2c10 = &gpioi2c4;
		i2c11 = &i2chdmi;
		i2c12 = &i2cexio4;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		key-1 {
		        gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_1>;
		        label = "SW2-1";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-2 {
		        gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_2>;
		        label = "SW2-2";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-3 {
		        gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_3>;
		        label = "SW2-3";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-4 {
		        gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_4>;
		        label = "SW2-4";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-a {
		        gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_A>;
		        label = "SW30";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-b {
		        gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_B>;
		        label = "SW31";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-c {
		        gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_C>;
		        label = "SW32";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-d {
		        gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_D>;
		        label = "SW33";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-e {
		        gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_E>;
		        label = "SW34";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-f {
		        gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_F>;
		        label = "SW35";
		        wakeup-source;
		        debounce-interval = <20>;
		};
		key-g {
		        gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
		        linux,code = <KEY_G>;
		        label = "SW36";
		        wakeup-source;
		        debounce-interval = <20>;
		};
	};

	leds {
		compatible = "gpio-leds";
		led6 {
			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
			label = "LED6";
		};
		led7 {
			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
			label = "LED7";
		};
		led8 {
			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
			label = "LED8";
		};
	};

	vcc_sdhi0: regulator-vcc-sdhi0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi0: regulator-vccq-sdhi0 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI0 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi1: regulator-vcc-sdhi1 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI1 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi1: regulator-vccq-sdhi1 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI1 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi2: regulator-vcc-sdhi2 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi2: regulator-vccq-sdhi2 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI2 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	audio_clock: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <11289600>;
	};

	rsnd_ak4643: sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&sndcodec>;
		simple-audio-card,frame-master = <&sndcodec>;

		sndcpu: simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		sndcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			clocks = <&audio_clock>;
		};
	};

	hdmi-in {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&adv7612_in>;
			};
		};
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_out: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	composite-in {
		compatible = "composite-video-connector";

		port {
			composite_con_in: endpoint {
				remote-endpoint = <&adv7180_in>;
			};
		};
	};

	x2_clk: x2-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x13_clk: x13-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	gpioi2c2: i2c-9 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	gpioi2c4: i2c-10 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * A fallback to GPIO is provided for I2C2.
	 */
	i2chdmi: i2c-11 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c2>, <&gpioi2c2>;
		i2c-bus-name = "i2c-hdmi";
		#address-cells = <1>;
		#size-cells = <0>;

		ak4643: codec@12 {
			compatible = "asahi-kasei,ak4643";
			#sound-dai-cells = <0>;
			reg = <0x12>;
		};

		composite-in@20 {
			compatible = "adi,adv7180cp";
			reg = <0x20>;
			remote = <&vin1>;

			port {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7180_in: endpoint {
						remote-endpoint = <&composite_con_in>;
					};
				};

				port@3 {
					reg = <3>;
					adv7180_out: endpoint {
						bus-width = <8>;
						remote-endpoint = <&vin1ep>;
					};
				};
			};
		};

		hdmi@39 {
			compatible = "adi,adv7511w";
			reg = <0x39>;
			interrupt-parent = <&gpio3>;
			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;

			adi,input-depth = <8>;
			adi,input-colorspace = "rgb";
			adi,input-clock = "1x";
			adi,input-style = <1>;
			adi,input-justification = "evenly";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7511_in: endpoint {
						remote-endpoint = <&du_out_rgb>;
					};
				};

				port@1 {
					reg = <1>;
					adv7511_out: endpoint {
						remote-endpoint = <&hdmi_con_out>;
					};
				};
			};
		};

		hdmi-in@4c {
			compatible = "adi,adv7612";
			reg = <0x4c>;
			interrupt-parent = <&gpio4>;
			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
			default-input = <0>;

			port {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7612_in: endpoint {
						remote-endpoint = <&hdmi_con_in>;
					};
				};

				port@2 {
					reg = <2>;
					adv7612_out: endpoint {
						remote-endpoint = <&vin0ep2>;
					};
				};
			};
		};

		eeprom@50 {
			compatible = "renesas,r1ex24002", "atmel,24c02";
			reg = <0x50>;
			pagesize = <16>;
		};
	};

	/*
	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
	 * A fallback to GPIO is provided.
	 */
	i2cexio4: i2c-12 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c4>, <&gpioi2c4>;
		i2c-bus-name = "i2c-exio4";
		#address-cells = <1>;
		#size-cells = <0>;
	};
};

&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
		 <&x13_clk>, <&x2_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
	};
};

&lvds0 {
	ports {
		port@1 {
			lvds_connector: endpoint {
			};
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	i2c2_pins: i2c2 {
		groups = "i2c2";
		function = "i2c2";
	};

	i2c4_pins: i2c4 {
		groups = "i2c4_c";
		function = "i2c4";
	};

	du_pins: du {
		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
		function = "du";
	};

	scif0_pins: scif0 {
		groups = "scif0_data_d";
		function = "scif0";
	};

	scif1_pins: scif1 {
		groups = "scif1_data_d";
		function = "scif1";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq0";
		function = "intc";
	};

	pmic_irq_pins: pmicirq {
		groups = "intc_irq2";
		function = "intc";
	};

	sdhi0_pins: sd0 {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <3300>;
	};

	sdhi0_pins_uhs: sd0_uhs {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
		power-source = <1800>;
	};

	sdhi1_pins: sd1 {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
		power-source = <3300>;
	};

	sdhi1_pins_uhs: sd1_uhs {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
		power-source = <1800>;
	};

	sdhi2_pins: sd2 {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <3300>;
	};

	sdhi2_pins_uhs: sd2_uhs {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
		power-source = <1800>;
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	sound_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	sound_clk_pins: sound_clk {
		groups = "audio_clk_a";
		function = "audio_clk";
	};

	vin0_pins: vin0 {
		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
		function = "vin0";
	};

	vin1_pins: vin1 {
		groups = "vin1_data8", "vin1_clk";
		function = "vin1";
	};
};

&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
	};
};

&cmt0 {
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&vdd_dvfs>;
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif1 {
	pinctrl-0 = <&scif1_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif_clk {
	clock-frequency = <14745600>;
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-1 = <&sdhi0_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi0>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	status = "okay";
};

&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-1 = <&sdhi1_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
	sd-uhs-sdr50;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-1 = <&sdhi2_pins_uhs>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&vcc_sdhi2>;
	vqmmc-supply = <&vccq_sdhi2>;
	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
	sd-uhs-sdr50;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-cpol;
		spi-cpha;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader";
				reg = <0x00000000 0x00040000>;
				read-only;
			};
			partition@40000 {
				label = "user";
				reg = <0x00040000 0x00400000>;
				read-only;
			};
			partition@440000 {
				label = "flash";
				reg = <0x00440000 0x03bc0000>;
			};
		};
	};
};

&i2c2 {
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "i2c-hdmi";

	status = "okay";
	clock-frequency = <100000>;

};

&i2c6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pmic_irq_pins>;
	status = "okay";
	clock-frequency = <100000>;

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;

		rtc {
			compatible = "dlg,da9063-rtc";
		};

		wdt {
			compatible = "dlg,da9063-watchdog";
		};
	};

	vdd_dvfs: regulator@68 {
		compatible = "dlg,da9210";
		reg = <0x68>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1000000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&i2c4 {
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-names = "i2c-exio4";
};

&rcar_sound {
	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	pinctrl-names = "default";

	/* Single DAI */
	#sound-dai-cells = <0>;

	status = "okay";

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0 &src2 &dvc0>;
			capture  = <&ssi1 &src3 &dvc1>;
		};
	};
};

&ssi1 {
	shared-pin;
};

/* HDMI video input */
&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
		vin0ep2: endpoint {
			remote-endpoint = <&adv7612_out>;
			bus-width = <24>;
			hsync-active = <0>;
			vsync-active = <0>;
			pclk-sample = <1>;
			data-active = <1>;
		};
	};
};

/* composite video input */
&vin1 {
	pinctrl-0 = <&vin1_pins>;
	pinctrl-names = "default";

	status = "okay";

	port {
		vin1ep: endpoint {
			remote-endpoint = <&adv7180_out>;
			bus-width = <8>;
		};
	};
};
Commit	Line	Data
cdbfaf64	1	// SPDX-License-Identifier: GPL-2.0
b8af4591 UH	2	/*
	3	* Device Tree Source for the Gose board
	4	*
	5	* Copyright (C) 2014-2015 Renesas Electronics Corporation
b8af4591 UH	6	*/
b8af4591 UH	7
f8905ce8 SH	8	/*
	9	* SSI-AK4643
	10	*
	11	* SW1: 1: AK4643
	12	* 2: CN22
	13	* 3: ADV7511
	14	*
	15	* This command is required when Playback/Capture
	16	*
	17	* amixer set "LINEOUT Mixer DACL" on
ae79f66d SH	18	* amixer set "DVC Out" 100%
	19	* amixer set "DVC In" 100%
	20	*
	21	* You can use Mute
	22	*
	23	* amixer set "DVC Out Mute" on
	24	* amixer set "DVC In Mute" on
	25	*
	26	* You can use Volume Ramp
	27	*
	28	* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
	29	* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
	30	* amixer set "DVC Out Ramp" on
	31	* aplay xxx.wav &
	32	* amixer set "DVC Out" 80% // Volume Down
	33	* amixer set "DVC Out" 100% // Volume Up
f8905ce8	34	*/
ae79f66d	35
b8af4591 UH	36	/dts-v1/;
	37	#include "r8a7793.dtsi"
	38	#include <dt-bindings/gpio/gpio.h>
	39	#include <dt-bindings/input/input.h>
	40
	41	/ {
	42	model = "Gose";
	43	compatible = "renesas,gose", "renesas,r8a7793";
	44
	45	aliases {
	46	serial0 = &scif0;
	47	serial1 = &scif1;
786ef2ee	48	i2c9 = &gpioi2c2;
931bc7ec	49	i2c10 = &gpioi2c4;
786ef2ee	50	i2c11 = &i2chdmi;
931bc7ec	51	i2c12 = &i2cexio4;
b8af4591 UH	52	};
	53
	54	chosen {
07d2bf96	55	bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
16010a3e	56	stdout-path = "serial0:115200n8";
b8af4591 UH	57	};
	58
	59	memory@40000000 {
	60	device_type = "memory";
	61	reg = <0 0x40000000 0 0x40000000>;
	62	};
d7d5974b SH	63
	64	gpio-keys {
	65	compatible = "gpio-keys";
	66
	67	key-1 {
	68	gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
	69	linux,code = <KEY_1>;
	70	label = "SW2-1";
c816617e	71	wakeup-source;
d7d5974b SH	72	debounce-interval = <20>;
	73	};
	74	key-2 {
	75	gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
	76	linux,code = <KEY_2>;
	77	label = "SW2-2";
c816617e	78	wakeup-source;
d7d5974b SH	79	debounce-interval = <20>;
	80	};
	81	key-3 {
	82	gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
	83	linux,code = <KEY_3>;
	84	label = "SW2-3";
c816617e	85	wakeup-source;
d7d5974b SH	86	debounce-interval = <20>;
	87	};
	88	key-4 {
	89	gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
	90	linux,code = <KEY_4>;
	91	label = "SW2-4";
c816617e	92	wakeup-source;
d7d5974b SH	93	debounce-interval = <20>;
	94	};
	95	key-a {
	96	gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
	97	linux,code = <KEY_A>;
	98	label = "SW30";
c816617e	99	wakeup-source;
d7d5974b SH	100	debounce-interval = <20>;
	101	};
	102	key-b {
	103	gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
	104	linux,code = <KEY_B>;
	105	label = "SW31";
c816617e	106	wakeup-source;
d7d5974b SH	107	debounce-interval = <20>;
	108	};
	109	key-c {
	110	gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
	111	linux,code = <KEY_C>;
	112	label = "SW32";
c816617e	113	wakeup-source;
d7d5974b SH	114	debounce-interval = <20>;
	115	};
	116	key-d {
	117	gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
	118	linux,code = <KEY_D>;
	119	label = "SW33";
c816617e	120	wakeup-source;
d7d5974b SH	121	debounce-interval = <20>;
	122	};
	123	key-e {
	124	gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
	125	linux,code = <KEY_E>;
	126	label = "SW34";
c816617e	127	wakeup-source;
d7d5974b SH	128	debounce-interval = <20>;
	129	};
	130	key-f {
	131	gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
	132	linux,code = <KEY_F>;
	133	label = "SW35";
c816617e	134	wakeup-source;
d7d5974b SH	135	debounce-interval = <20>;
	136	};
	137	key-g {
	138	gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
	139	linux,code = <KEY_G>;
	140	label = "SW36";
c816617e	141	wakeup-source;
d7d5974b SH	142	debounce-interval = <20>;
	143	};
	144	};
3b18d859 SH	145
	146	leds {
	147	compatible = "gpio-leds";
	148	led6 {
	149	gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
	150	label = "LED6";
	151	};
	152	led7 {
	153	gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
	154	label = "LED7";
	155	};
	156	led8 {
	157	gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
	158	label = "LED8";
	159	};
	160	};
8871eb07	161
b6dfc0d4	162	vcc_sdhi0: regulator-vcc-sdhi0 {
6f92cb2f UH	163	compatible = "regulator-fixed";
	164
	165	regulator-name = "SDHI0 Vcc";
	166	regulator-min-microvolt = <3300000>;
	167	regulator-max-microvolt = <3300000>;
	168
	169	gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
	170	enable-active-high;
	171	};
	172
b6dfc0d4	173	vccq_sdhi0: regulator-vccq-sdhi0 {
6f92cb2f UH	174	compatible = "regulator-gpio";
	175
	176	regulator-name = "SDHI0 VccQ";
	177	regulator-min-microvolt = <1800000>;
	178	regulator-max-microvolt = <3300000>;
	179
	180	gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
	181	gpios-states = <1>;
	182	states = <3300000 1
	183	1800000 0>;
	184	};
	185
b6dfc0d4	186	vcc_sdhi1: regulator-vcc-sdhi1 {
6f92cb2f UH	187	compatible = "regulator-fixed";
	188
	189	regulator-name = "SDHI1 Vcc";
	190	regulator-min-microvolt = <3300000>;
	191	regulator-max-microvolt = <3300000>;
	192
	193	gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
	194	enable-active-high;
	195	};
	196
b6dfc0d4	197	vccq_sdhi1: regulator-vccq-sdhi1 {
6f92cb2f UH	198	compatible = "regulator-gpio";
	199
	200	regulator-name = "SDHI1 VccQ";
	201	regulator-min-microvolt = <1800000>;
	202	regulator-max-microvolt = <3300000>;
	203
	204	gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
	205	gpios-states = <1>;
	206	states = <3300000 1
	207	1800000 0>;
	208	};
	209
b6dfc0d4	210	vcc_sdhi2: regulator-vcc-sdhi2 {
6f92cb2f UH	211	compatible = "regulator-fixed";
	212
	213	regulator-name = "SDHI2 Vcc";
	214	regulator-min-microvolt = <3300000>;
	215	regulator-max-microvolt = <3300000>;
	216
	217	gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
	218	enable-active-high;
	219	};
	220
b6dfc0d4	221	vccq_sdhi2: regulator-vccq-sdhi2 {
6f92cb2f UH	222	compatible = "regulator-gpio";
	223
	224	regulator-name = "SDHI2 VccQ";
	225	regulator-min-microvolt = <1800000>;
	226	regulator-max-microvolt = <3300000>;
	227
	228	gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
	229	gpios-states = <1>;
	230	states = <3300000 1
	231	1800000 0>;
	232	};
	233
45e4f513	234	audio_clock: audio_clock {
f8905ce8 SH	235	compatible = "fixed-clock";
	236	#clock-cells = <0>;
	237	clock-frequency = <11289600>;
f8905ce8 SH	238	};
	239
	240	rsnd_ak4643: sound {
	241	compatible = "simple-audio-card";
	242
	243	simple-audio-card,format = "left_j";
	244	simple-audio-card,bitclock-master = <&sndcodec>;
	245	simple-audio-card,frame-master = <&sndcodec>;
	246
	247	sndcpu: simple-audio-card,cpu {
	248	sound-dai = <&rcar_sound>;
	249	};
	250
	251	sndcodec: simple-audio-card,codec {
	252	sound-dai = <&ak4643>;
	253	clocks = <&audio_clock>;
	254	};
	255	};
	256
bc63cd87 UH	257	hdmi-in {
	258	compatible = "hdmi-connector";
	259	type = "a";
	260
	261	port {
	262	hdmi_con_in: endpoint {
	263	remote-endpoint = <&adv7612_in>;
	264	};
	265	};
	266	};
	267
8871eb07 MD	268	hdmi-out {
	269	compatible = "hdmi-connector";
	270	type = "a";
	271
	272	port {
bc63cd87	273	hdmi_con_out: endpoint {
8871eb07 MD	274	remote-endpoint = <&adv7511_out>;
	275	};
	276	};
	277	};
	278
8cae3590 UH	279	composite-in {
	280	compatible = "composite-video-connector";
	281
	282	port {
	283	composite_con_in: endpoint {
	284	remote-endpoint = <&adv7180_in>;
	285	};
	286	};
	287	};
	288
8871eb07 MD	289	x2_clk: x2-clock {
	290	compatible = "fixed-clock";
	291	#clock-cells = <0>;
	292	clock-frequency = <74250000>;
	293	};
	294
	295	x13_clk: x13-clock {
	296	compatible = "fixed-clock";
	297	#clock-cells = <0>;
	298	clock-frequency = <148500000>;
	299	};
786ef2ee WS	300
	301	gpioi2c2: i2c-9 {
	302	#address-cells = <1>;
	303	#size-cells = <0>;
	304	compatible = "i2c-gpio";
	305	status = "disabled";
	306	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	307	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	308	i2c-gpio,delay-us = <5>;
	309	};
	310
931bc7ec WS	311	gpioi2c4: i2c-10 {
	312	#address-cells = <1>;
	313	#size-cells = <0>;
	314	compatible = "i2c-gpio";
	315	status = "disabled";
	316	scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	317	sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	318	i2c-gpio,delay-us = <5>;
	319	};
	320
786ef2ee WS	321	/*
	322	* A fallback to GPIO is provided for I2C2.
	323	*/
	324	i2chdmi: i2c-11 {
	325	compatible = "i2c-demux-pinctrl";
	326	i2c-parent = <&i2c2>, <&gpioi2c2>;
	327	i2c-bus-name = "i2c-hdmi";
	328	#address-cells = <1>;
	329	#size-cells = <0>;
	330
	331	ak4643: codec@12 {
	332	compatible = "asahi-kasei,ak4643";
	333	#sound-dai-cells = <0>;
	334	reg = <0x12>;
	335	};
	336
	337	composite-in@20 {
	338	compatible = "adi,adv7180cp";
	339	reg = <0x20>;
	340	remote = <&vin1>;
	341
	342	port {
	343	#address-cells = <1>;
	344	#size-cells = <0>;
	345
	346	port@0 {
	347	reg = <0>;
	348	adv7180_in: endpoint {
	349	remote-endpoint = <&composite_con_in>;
	350	};
	351	};
	352
	353	port@3 {
	354	reg = <3>;
	355	adv7180_out: endpoint {
	356	bus-width = <8>;
	357	remote-endpoint = <&vin1ep>;
	358	};
	359	};
	360	};
	361	};
	362
	363	hdmi@39 {
	364	compatible = "adi,adv7511w";
	365	reg = <0x39>;
	366	interrupt-parent = <&gpio3>;
	367	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
	368
	369	adi,input-depth = <8>;
	370	adi,input-colorspace = "rgb";
	371	adi,input-clock = "1x";
	372	adi,input-style = <1>;
	373	adi,input-justification = "evenly";
	374
	375	ports {
	376	#address-cells = <1>;
	377	#size-cells = <0>;
	378
	379	port@0 {
	380	reg = <0>;
	381	adv7511_in: endpoint {
	382	remote-endpoint = <&du_out_rgb>;
	383	};
	384	};
385
386	port@1 {
387	reg = <1>;
388	adv7511_out: endpoint {
389	remote-endpoint = <&hdmi_con_out>;
390	};
391	};
392	};
393	};
394
395	hdmi-in@4c {
396	compatible = "adi,adv7612";
397	reg = <0x4c>;
398	interrupt-parent = <&gpio4>;
399	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
400	default-input = <0>;
401
402	port {
403	#address-cells = <1>;
404	#size-cells = <0>;
405
406	port@0 {
407	reg = <0>;
408	adv7612_in: endpoint {
409	remote-endpoint = <&hdmi_con_in>;
410	};
411	};
412
413	port@2 {
414	reg = <2>;
415	adv7612_out: endpoint {
416	remote-endpoint = <&vin0ep2>;
417	};
418	};
419	};
420	};
421
422	eeprom@50 {
423	compatible = "renesas,r1ex24002", "atmel,24c02";
424	reg = <0x50>;
425	pagesize = <16>;
426	};
427	};
931bc7ec WS	428
	429	/*
	430	* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
	431	* A fallback to GPIO is provided.
	432	*/
	433	i2cexio4: i2c-12 {
	434	compatible = "i2c-demux-pinctrl";
	435	i2c-parent = <&i2c4>, <&gpioi2c4>;
	436	i2c-bus-name = "i2c-exio4";
	437	#address-cells = <1>;
	438	#size-cells = <0>;
	439	};
8871eb07 MD	440	};
	441
	442	&du {
	443	pinctrl-0 = <&du_pins>;
	444	pinctrl-names = "default";
	445	status = "okay";
	446
edb0c3af	447	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
8871eb07	448	<&x13_clk>, <&x2_clk>;
edb0c3af	449	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
8871eb07 MD	450
	451	ports {
	452	port@0 {
	453	endpoint {
	454	remote-endpoint = <&adv7511_in>;
	455	};
	456	};
edb0c3af LP	457	};
	458	};
	459
	460	&lvds0 {
	461	ports {
8871eb07 MD	462	port@1 {
	463	lvds_connector: endpoint {
	464	};
	465	};
	466	};
b8af4591 UH	467	};
	468
	469	&extal_clk {
	470	clock-frequency = <20000000>;
	471	};
	472
a81f0508	473	&pfc {
81a81ba9 GU	474	pinctrl-0 = <&scif_clk_pins>;
	475	pinctrl-names = "default";
	476
f6890af3	477	i2c2_pins: i2c2 {
2e207c1c SH	478	groups = "i2c2";
2e207c1c SH	479	function = "i2c2";
f6890af3 SH	480	};
f6890af3 SH	481
931bc7ec WS	482	i2c4_pins: i2c4 {
	483	groups = "i2c4_c";
	484	function = "i2c4";
	485	};
	486
8871eb07	487	du_pins: du {
2e207c1c SH	488	groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
2e207c1c SH	489	function = "du";
8871eb07 MD	490	};
8871eb07 MD	491
167d34af	492	scif0_pins: scif0 {
2e207c1c SH	493	groups = "scif0_data_d";
2e207c1c SH	494	function = "scif0";
a81f0508 SH	495	};
a81f0508 SH	496
167d34af	497	scif1_pins: scif1 {
2e207c1c SH	498	groups = "scif1_data_d";
2e207c1c SH	499	function = "scif1";
a81f0508 SH	500	};
a81f0508 SH	501
81a81ba9	502	scif_clk_pins: scif_clk {
2e207c1c SH	503	groups = "scif_clk";
2e207c1c SH	504	function = "scif_clk";
81a81ba9 GU	505	};
81a81ba9 GU	506
a81f0508	507	ether_pins: ether {
2e207c1c SH	508	groups = "eth_link", "eth_mdio", "eth_rmii";
2e207c1c SH	509	function = "eth";
a81f0508 SH	510	};
	511
	512	phy1_pins: phy1 {
2e207c1c SH	513	groups = "intc_irq0";
2e207c1c SH	514	function = "intc";
a81f0508	515	};
6380d62a	516
185555ff MV	517	pmic_irq_pins: pmicirq {
	518	groups = "intc_irq2";
	519	function = "intc";
	520	};
	521
6f92cb2f	522	sdhi0_pins: sd0 {
af897250 SH	523	groups = "sdhi0_data4", "sdhi0_ctrl";
af897250 SH	524	function = "sdhi0";
6d25a418 SH	525	power-source = <3300>;
	526	};
	527
	528	sdhi0_pins_uhs: sd0_uhs {
	529	groups = "sdhi0_data4", "sdhi0_ctrl";
	530	function = "sdhi0";
	531	power-source = <1800>;
6f92cb2f UH	532	};
	533
	534	sdhi1_pins: sd1 {
af897250 SH	535	groups = "sdhi1_data4", "sdhi1_ctrl";
af897250 SH	536	function = "sdhi1";
6d25a418 SH	537	power-source = <3300>;
	538	};
	539
	540	sdhi1_pins_uhs: sd1_uhs {
	541	groups = "sdhi1_data4", "sdhi1_ctrl";
	542	function = "sdhi1";
	543	power-source = <1800>;
6f92cb2f UH	544	};
	545
	546	sdhi2_pins: sd2 {
af897250 SH	547	groups = "sdhi2_data4", "sdhi2_ctrl";
af897250 SH	548	function = "sdhi2";
6d25a418 SH	549	power-source = <3300>;
	550	};
	551
	552	sdhi2_pins_uhs: sd2_uhs {
	553	groups = "sdhi2_data4", "sdhi2_ctrl";
	554	function = "sdhi2";
	555	power-source = <1800>;
6f92cb2f UH	556	};
6f92cb2f UH	557
740f5c80	558	qspi_pins: qspi {
2e207c1c SH	559	groups = "qspi_ctrl", "qspi_data4";
2e207c1c SH	560	function = "qspi";
6380d62a	561	};
f8905ce8 SH	562
f8905ce8 SH	563	sound_pins: sound {
2e207c1c SH	564	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
2e207c1c SH	565	function = "ssi";
f8905ce8 SH	566	};
	567
	568	sound_clk_pins: sound_clk {
2e207c1c SH	569	groups = "audio_clk_a";
2e207c1c SH	570	function = "audio_clk";
f8905ce8	571	};
bc63cd87 UH	572
	573	vin0_pins: vin0 {
	574	groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
	575	function = "vin0";
	576	};
8cae3590 UH	577
	578	vin1_pins: vin1 {
	579	groups = "vin1_data8", "vin1_clk";
	580	function = "vin1";
	581	};
a81f0508 SH	582	};
a81f0508 SH	583
b8af4591	584	&ether {
a81f0508 SH	585	pinctrl-0 = <&ether_pins &phy1_pins>;
	586	pinctrl-names = "default";
	587
b8af4591 UH	588	phy-handle = <&phy1>;
	589	renesas,ether-link-active-low;
	590	status = "okay";
	591
	592	phy1: ethernet-phy@1 {
	593	reg = <1>;
	594	interrupt-parent = <&irqc0>;
	595	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	596	micrel,led-mode = <1>;
	597	};
	598	};
	599
	600	&cmt0 {
	601	status = "okay";
	602	};
	603
d17f45eb MV	604	&cpu0 {
	605	cpu0-supply = <&vdd_dvfs>;
	606	};
	607
80aed52a GU	608	&rwdt {
	609	timeout-sec = <60>;
	610	status = "okay";
	611	};
	612
b8af4591	613	&scif0 {
a81f0508 SH	614	pinctrl-0 = <&scif0_pins>;
	615	pinctrl-names = "default";
	616
b8af4591 UH	617	status = "okay";
	618	};
	619
	620	&scif1 {
a81f0508 SH	621	pinctrl-0 = <&scif1_pins>;
	622	pinctrl-names = "default";
	623
b8af4591 UH	624	status = "okay";
b8af4591 UH	625	};
6380d62a	626
81a81ba9 GU	627	&scif_clk {
81a81ba9 GU	628	clock-frequency = <14745600>;
81a81ba9 GU	629	};
81a81ba9 GU	630
6f92cb2f UH	631	&sdhi0 {
6f92cb2f UH	632	pinctrl-0 = <&sdhi0_pins>;
6d25a418 SH	633	pinctrl-1 = <&sdhi0_pins_uhs>;
6d25a418 SH	634	pinctrl-names = "default", "state_uhs";
6f92cb2f UH	635
	636	vmmc-supply = <&vcc_sdhi0>;
	637	vqmmc-supply = <&vccq_sdhi0>;
	638	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	639	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
6d25a418 SH	640	sd-uhs-sdr50;
6d25a418 SH	641	sd-uhs-sdr104;
6f92cb2f UH	642	status = "okay";
	643	};
	644
	645	&sdhi1 {
	646	pinctrl-0 = <&sdhi1_pins>;
6d25a418 SH	647	pinctrl-1 = <&sdhi1_pins_uhs>;
6d25a418 SH	648	pinctrl-names = "default", "state_uhs";
6f92cb2f UH	649
	650	vmmc-supply = <&vcc_sdhi1>;
	651	vqmmc-supply = <&vccq_sdhi1>;
	652	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	653	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
6d25a418	654	sd-uhs-sdr50;
6f92cb2f UH	655	status = "okay";
	656	};
	657
	658	&sdhi2 {
	659	pinctrl-0 = <&sdhi2_pins>;
6d25a418 SH	660	pinctrl-1 = <&sdhi2_pins_uhs>;
6d25a418 SH	661	pinctrl-names = "default", "state_uhs";
6f92cb2f UH	662
	663	vmmc-supply = <&vcc_sdhi2>;
	664	vqmmc-supply = <&vccq_sdhi2>;
	665	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
6d25a418	666	sd-uhs-sdr50;
6f92cb2f UH	667	status = "okay";
	668	};
	669
6380d62a SH	670	&qspi {
	671	pinctrl-0 = <&qspi_pins>;
	672	pinctrl-names = "default";
	673
	674	status = "okay";
	675
	676	flash@0 {
	677	compatible = "spansion,s25fl512s", "jedec,spi-nor";
	678	reg = <0>;
	679	spi-max-frequency = <30000000>;
	680	spi-tx-bus-width = <4>;
	681	spi-rx-bus-width = <4>;
	682	spi-cpol;
	683	spi-cpha;
	684	m25p,fast-read;
	685
	686	partitions {
e5e6f9b4	687	compatible = "fixed-partitions";
6380d62a SH	688	#address-cells = <1>;
	689	#size-cells = <1>;
	690
	691	partition@0 {
	692	label = "loader";
	693	reg = <0x00000000 0x00040000>;
	694	read-only;
	695	};
	696	partition@40000 {
	697	label = "user";
	698	reg = <0x00040000 0x00400000>;
	699	read-only;
	700	};
	701	partition@440000 {
	702	label = "flash";
	703	reg = <0x00440000 0x03bc0000>;
	704	};
	705	};
	706	};
	707	};
f6890af3 SH	708
	709	&i2c2 {
	710	pinctrl-0 = <&i2c2_pins>;
786ef2ee	711	pinctrl-names = "i2c-hdmi";
f6890af3 SH	712
	713	status = "okay";
	714	clock-frequency = <100000>;
	715
f6890af3	716	};
f8905ce8	717
c20839a3	718	&i2c6 {
185555ff MV	719	pinctrl-names = "default";
185555ff MV	720	pinctrl-0 = <&pmic_irq_pins>;
c20839a3 GU	721	status = "okay";
	722	clock-frequency = <100000>;
	723
	724	pmic@58 {
	725	compatible = "dlg,da9063";
	726	reg = <0x58>;
	727	interrupt-parent = <&irqc0>;
	728	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	729	interrupt-controller;
	730
	731	rtc {
	732	compatible = "dlg,da9063-rtc";
	733	};
	734
	735	wdt {
	736	compatible = "dlg,da9063-watchdog";
	737	};
	738	};
d17f45eb MV	739
	740	vdd_dvfs: regulator@68 {
	741	compatible = "dlg,da9210";
	742	reg = <0x68>;
	743	interrupt-parent = <&irqc0>;
	744	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	745
	746	regulator-min-microvolt = <1000000>;
	747	regulator-max-microvolt = <1000000>;
	748	regulator-boot-on;
	749	regulator-always-on;
	750	};
c20839a3 GU	751	};
c20839a3 GU	752
931bc7ec WS	753	&i2c4 {
	754	pinctrl-0 = <&i2c4_pins>;
	755	pinctrl-names = "i2c-exio4";
	756	};
	757
f8905ce8 SH	758	&rcar_sound {
	759	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	760	pinctrl-names = "default";
	761
	762	/* Single DAI */
	763	#sound-dai-cells = <0>;
	764
	765	status = "okay";
	766
	767	rcar_sound,dai {
	768	dai0 {
ae79f66d SH	769	playback = <&ssi0 &src2 &dvc0>;
ae79f66d SH	770	capture = <&ssi1 &src3 &dvc1>;
f8905ce8 SH	771	};
	772	};
	773	};
	774
f8905ce8	775	&ssi1 {
f8905ce8 SH	776	shared-pin;
f8905ce8 SH	777	};
bc63cd87 UH	778
	779	/* HDMI video input */
	780	&vin0 {
	781	status = "okay";
	782	pinctrl-0 = <&vin0_pins>;
	783	pinctrl-names = "default";
	784
	785	port {
bc63cd87 UH	786	vin0ep2: endpoint {
	787	remote-endpoint = <&adv7612_out>;
	788	bus-width = <24>;
	789	hsync-active = <0>;
	790	vsync-active = <0>;
	791	pclk-sample = <1>;
	792	data-active = <1>;
	793	};
	794	};
	795	};
8cae3590 UH	796
	797	/* composite video input */
	798	&vin1 {
	799	pinctrl-0 = <&vin1_pins>;
	800	pinctrl-names = "default";
	801
	802	status = "okay";
	803
	804	port {
8cae3590 UH	805	vin1ep: endpoint {
	806	remote-endpoint = <&adv7180_out>;
	807	bus-width = <8>;
	808	};
	809	};
	810	};