]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config MMU |
2 | bool | |
3 | default y | |
4 | ||
66701b14 CL |
5 | config ZONE_DMA |
6 | bool | |
7 | default y | |
8 | ||
1da177e4 LT |
9 | config RWSEM_GENERIC_SPINLOCK |
10 | bool | |
11 | default y | |
12 | ||
13 | config RWSEM_XCHGADD_ALGORITHM | |
14 | bool | |
15 | ||
f0d1b0b3 DH |
16 | config ARCH_HAS_ILOG2_U32 |
17 | bool | |
18 | default n | |
19 | ||
20 | config ARCH_HAS_ILOG2_U64 | |
21 | bool | |
22 | default n | |
23 | ||
e9f26df1 AM |
24 | config GENERIC_HWEIGHT |
25 | bool | |
26 | default y | |
27 | ||
1da177e4 LT |
28 | config GENERIC_CALIBRATE_DELAY |
29 | bool | |
30 | default y | |
31 | ||
ce816fa8 | 32 | config NO_IOPORT_MAP |
5ea81769 AV |
33 | def_bool y |
34 | ||
923dd2a4 JN |
35 | config FORCE_MAX_ZONEORDER |
36 | int | |
37 | default 6 | |
38 | ||
444e0c28 RV |
39 | config TRACE_IRQFLAGS_SUPPORT |
40 | depends on ETRAX_ARCH_V32 | |
41 | def_bool y | |
42 | ||
1da177e4 LT |
43 | config CRIS |
44 | bool | |
45 | default y | |
ec7748b5 | 46 | select HAVE_IDE |
4c9c6a1b | 47 | select GENERIC_ATOMIC64 |
af1839eb | 48 | select HAVE_UID16 |
4febd95a | 49 | select VIRT_TO_BUS |
c1d7e01d | 50 | select ARCH_WANT_IPC_PARSE_VERSION |
15825a5c | 51 | select GENERIC_IRQ_SHOW |
4673ca8e | 52 | select GENERIC_IOMAP |
5227b636 | 53 | select GENERIC_CMOS_UPDATE |
786d35d4 | 54 | select MODULES_USE_ELF_RELA |
27d892fb | 55 | select CLONE_BACKWARDS2 |
86df89a0 | 56 | select OLD_SIGSUSPEND |
eb2f2566 | 57 | select OLD_SIGACTION |
8fda64c2 | 58 | select ARCH_REQUIRE_GPIOLIB |
43f7071e | 59 | select IRQ_DOMAIN if ETRAX_ARCH_V32 |
a9f75ac5 RV |
60 | select OF if ETRAX_ARCH_V32 |
61 | select OF_EARLY_FLATTREE if ETRAX_ARCH_V32 | |
edfb6d5f | 62 | select CLKSRC_MMIO if ETRAX_ARCH_V32 |
ed9fd3ff | 63 | select GENERIC_CLOCKEVENTS if ETRAX_ARCH_V32 |
d3dad475 | 64 | select GENERIC_SCHED_CLOCK if ETRAX_ARCH_V32 |
f59625a8 | 65 | select HAVE_DEBUG_BUGVERBOSE if ETRAX_ARCH_V32 |
1da177e4 | 66 | |
bdc80787 PA |
67 | config HZ |
68 | int | |
69 | default 100 | |
70 | ||
dd82094c JN |
71 | config NR_CPUS |
72 | int | |
73 | default "1" | |
74 | ||
a9f75ac5 RV |
75 | config BUILTIN_DTB |
76 | string "DTB to build into the kernel image" | |
77 | depends on OF | |
78 | ||
1da177e4 LT |
79 | source "init/Kconfig" |
80 | ||
dc52ddc0 MH |
81 | source "kernel/Kconfig.freezer" |
82 | ||
1da177e4 LT |
83 | menu "General setup" |
84 | ||
85 | source "fs/Kconfig.binfmt" | |
86 | ||
87 | config ETRAX_CMDLINE | |
88 | string "Kernel command line" | |
89 | default "root=/dev/mtdblock3" | |
90 | help | |
91 | Pass additional commands to the kernel. | |
92 | ||
93 | config ETRAX_WATCHDOG | |
94 | bool "Enable ETRAX watchdog" | |
95 | help | |
96 | Enable the built-in watchdog timer support on ETRAX based embedded | |
97 | network computers. | |
98 | ||
99 | config ETRAX_WATCHDOG_NICE_DOGGY | |
100 | bool "Disable watchdog during Oops printouts" | |
101 | depends on ETRAX_WATCHDOG | |
102 | help | |
103 | By enabling this you make sure that the watchdog does not bite while | |
104 | printing oopses. Recommended for development systems but not for | |
105 | production releases. | |
106 | ||
107 | config ETRAX_FAST_TIMER | |
108 | bool "Enable ETRAX fast timer API" | |
109 | help | |
110 | This options enables the API to a fast timer implementation using | |
111 | timer1 to get sub jiffie resolution timers (primarily one-shot | |
112 | timers). | |
113 | This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. | |
114 | ||
923dd2a4 JN |
115 | config ETRAX_KMALLOCED_MODULES |
116 | bool "Enable module allocation with kmalloc" | |
1da177e4 | 117 | help |
923dd2a4 JN |
118 | Enable module allocation with kmalloc instead of vmalloc. |
119 | ||
923dd2a4 | 120 | source "kernel/Kconfig.preempt" |
1da177e4 | 121 | |
3f22ab27 DH |
122 | source mm/Kconfig |
123 | ||
1da177e4 LT |
124 | endmenu |
125 | ||
126 | menu "Hardware setup" | |
127 | ||
128 | choice | |
129 | prompt "Processor type" | |
130 | default ETRAX100LX | |
131 | ||
132 | config ETRAX100LX | |
133 | bool "ETRAX-100LX-v1" | |
60dbd663 | 134 | select ARCH_USES_GETTIMEOFFSET |
1da177e4 LT |
135 | help |
136 | Support version 1 of the ETRAX 100LX. | |
137 | ||
138 | config ETRAX100LX_V2 | |
139 | bool "ETRAX-100LX-v2" | |
60dbd663 | 140 | select ARCH_USES_GETTIMEOFFSET |
1da177e4 LT |
141 | help |
142 | Support version 2 of the ETRAX 100LX. | |
143 | ||
923dd2a4 JN |
144 | config ETRAXFS |
145 | bool "ETRAX-FS-V32" | |
146 | help | |
147 | Support CRIS V32. | |
148 | ||
149 | config CRIS_MACH_ARTPEC3 | |
150 | bool "ARTPEC-3" | |
151 | help | |
152 | Support Axis ARTPEC-3. | |
153 | ||
1da177e4 LT |
154 | endchoice |
155 | ||
156 | config ETRAX_ARCH_V10 | |
157 | bool | |
158 | default y if ETRAX100LX || ETRAX100LX_V2 | |
159 | default n if !(ETRAX100LX || ETRAX100LX_V2) | |
ae797bdf | 160 | select TTY |
1da177e4 | 161 | |
923dd2a4 JN |
162 | config ETRAX_ARCH_V32 |
163 | bool | |
164 | default y if (ETRAXFS || CRIS_MACH_ARTPEC3) | |
165 | default n if !(ETRAXFS || CRIS_MACH_ARTPEC3) | |
166 | ||
1da177e4 LT |
167 | config ETRAX_DRAM_SIZE |
168 | int "DRAM size (dec, in MB)" | |
169 | default "8" | |
170 | help | |
171 | Size of DRAM (decimal in MB) typically 2, 8 or 16. | |
172 | ||
923dd2a4 JN |
173 | config ETRAX_VMEM_SIZE |
174 | int "Video memory size (dec, in MB)" | |
175 | depends on ETRAX_ARCH_V32 && !ETRAXFS | |
176 | default 8 if !ETRAXFS | |
177 | help | |
178 | Size of Video accessible memory (decimal, in MB). | |
179 | ||
1da177e4 | 180 | config ETRAX_FLASH_BUSWIDTH |
923dd2a4 | 181 | int "Buswidth of NOR flash in bytes" |
1da177e4 LT |
182 | default "2" |
183 | help | |
923dd2a4 JN |
184 | Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. |
185 | ||
923dd2a4 JN |
186 | config ETRAX_FLASH1_SIZE |
187 | int "FLASH1 size (dec, in MB. 0 = Unknown)" | |
188 | default "0" | |
189 | ||
190 | choice | |
191 | prompt "Product debug-port" | |
192 | default ETRAX_DEBUG_PORT0 | |
193 | ||
194 | config ETRAX_DEBUG_PORT0 | |
195 | bool "Serial-0" | |
196 | help | |
197 | Choose a serial port for the ETRAX debug console. Default to | |
198 | port 0. | |
199 | ||
200 | config ETRAX_DEBUG_PORT1 | |
201 | bool "Serial-1" | |
202 | help | |
203 | Use serial port 1 for the console. | |
204 | ||
205 | config ETRAX_DEBUG_PORT2 | |
206 | bool "Serial-2" | |
207 | help | |
208 | Use serial port 2 for the console. | |
209 | ||
210 | config ETRAX_DEBUG_PORT3 | |
211 | bool "Serial-3" | |
212 | help | |
213 | Use serial port 3 for the console. | |
214 | ||
215 | config ETRAX_DEBUG_PORT_NULL | |
216 | bool "disabled" | |
217 | help | |
218 | Disable serial-port debugging. | |
219 | ||
220 | endchoice | |
221 | ||
222 | choice | |
223 | prompt "Kernel GDB port" | |
224 | depends on ETRAX_KGDB | |
225 | default ETRAX_KGDB_PORT0 | |
226 | help | |
227 | Choose a serial port for kernel debugging. NOTE: This port should | |
228 | not be enabled under Drivers for built-in interfaces (as it has its | |
229 | own initialization code) and should not be the same as the debug port. | |
230 | ||
231 | config ETRAX_KGDB_PORT0 | |
232 | bool "Serial-0" | |
233 | help | |
234 | Use serial port 0 for kernel debugging. | |
235 | ||
236 | config ETRAX_KGDB_PORT1 | |
237 | bool "Serial-1" | |
238 | help | |
239 | Use serial port 1 for kernel debugging. | |
240 | ||
241 | config ETRAX_KGDB_PORT2 | |
242 | bool "Serial-2" | |
243 | help | |
244 | Use serial port 2 for kernel debugging. | |
245 | ||
246 | config ETRAX_KGDB_PORT3 | |
247 | bool "Serial-3" | |
248 | help | |
249 | Use serial port 3 for kernel debugging. | |
250 | ||
251 | endchoice | |
1da177e4 LT |
252 | |
253 | source arch/cris/arch-v10/Kconfig | |
2d33d563 | 254 | source arch/cris/arch-v32/Kconfig |
1da177e4 LT |
255 | |
256 | endmenu | |
257 | ||
d5950b43 SR |
258 | source "net/Kconfig" |
259 | ||
1da177e4 LT |
260 | # bring in ETRAX built-in drivers |
261 | menu "Drivers for built-in interfaces" | |
2d33d563 JN |
262 | source arch/cris/arch-v10/drivers/Kconfig |
263 | source arch/cris/arch-v32/drivers/Kconfig | |
1da177e4 | 264 | |
79e04fdb JN |
265 | config ETRAX_AXISFLASHMAP |
266 | bool "Axis flash-map support" | |
267 | select MTD | |
268 | select MTD_CFI | |
269 | select MTD_CFI_AMDSTD | |
270 | select MTD_JEDECPROBE if ETRAX_ARCH_V32 | |
79e04fdb | 271 | select MTD_BLOCK |
79e04fdb JN |
272 | select MTD_COMPLEX_MAPPINGS |
273 | help | |
274 | This option enables MTD mapping of flash devices. Needed to use | |
275 | flash memories. If unsure, say Y. | |
276 | ||
c974a9e5 JN |
277 | config ETRAX_SYNCHRONOUS_SERIAL |
278 | bool "Synchronous serial-port support" | |
279 | help | |
280 | Select this to enable the synchronous serial port driver. | |
281 | ||
282 | config ETRAX_SYNCHRONOUS_SERIAL_PORT0 | |
283 | bool "Synchronous serial port 0 enabled" | |
284 | depends on ETRAX_SYNCHRONOUS_SERIAL | |
285 | help | |
286 | Enabled synchronous serial port 0. | |
287 | ||
288 | config ETRAX_SYNCHRONOUS_SERIAL0_DMA | |
289 | bool "Enable DMA on synchronous serial port 0." | |
290 | depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 | |
291 | help | |
292 | A synchronous serial port can run in manual or DMA mode. | |
293 | Selecting this option will make it run in DMA mode. | |
294 | ||
295 | config ETRAX_SYNCHRONOUS_SERIAL_PORT1 | |
296 | bool "Synchronous serial port 1 enabled" | |
297 | depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10) | |
298 | help | |
299 | Enabled synchronous serial port 1. | |
300 | ||
301 | config ETRAX_SYNCHRONOUS_SERIAL1_DMA | |
302 | bool "Enable DMA on synchronous serial port 1." | |
303 | depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 | |
304 | help | |
305 | A synchronous serial port can run in manual or DMA mode. | |
306 | Selecting this option will make it run in DMA mode. | |
307 | ||
923dd2a4 JN |
308 | choice |
309 | prompt "Network LED behavior" | |
310 | depends on ETRAX_ETHERNET | |
311 | default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY | |
312 | ||
313 | config ETRAX_NETWORK_LED_ON_WHEN_LINK | |
314 | bool "LED_on_when_link" | |
315 | help | |
316 | Selecting LED_on_when_link will light the LED when there is a | |
317 | connection and will flash off when there is activity. | |
318 | ||
319 | Selecting LED_on_when_activity will light the LED only when | |
320 | there is activity. | |
321 | ||
322 | This setting will also affect the behaviour of other activity LEDs | |
323 | e.g. Bluetooth. | |
324 | ||
325 | config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY | |
326 | bool "LED_on_when_activity" | |
327 | help | |
328 | Selecting LED_on_when_link will light the LED when there is a | |
329 | connection and will flash off when there is activity. | |
330 | ||
331 | Selecting LED_on_when_activity will light the LED only when | |
332 | there is activity. | |
333 | ||
334 | This setting will also affect the behaviour of other activity LEDs | |
335 | e.g. Bluetooth. | |
336 | ||
337 | endchoice | |
338 | ||
339 | choice | |
340 | prompt "Ser0 DMA out channel" | |
341 | depends on ETRAX_SERIAL_PORT0 | |
342 | default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32 | |
343 | default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10 | |
344 | ||
345 | config ETRAX_SERIAL_PORT0_NO_DMA_OUT | |
346 | bool "Ser0 uses no DMA for output" | |
347 | help | |
348 | Do not use DMA for ser0 output. | |
349 | ||
350 | config ETRAX_SERIAL_PORT0_DMA6_OUT | |
351 | bool "Ser0 uses DMA6 for output" | |
352 | depends on ETRAXFS | |
353 | help | |
354 | Enables the DMA6 output channel for ser0 (ttyS0). | |
355 | If you do not enable DMA, an interrupt for each character will be | |
356 | used when transmitting data. | |
357 | Normally you want to use DMA, unless you use the DMA channel for | |
358 | something else. | |
359 | ||
360 | config ETRAX_SERIAL_PORT0_DMA0_OUT | |
361 | bool "Ser0 uses DMA0 for output" | |
362 | depends on CRIS_MACH_ARTPEC3 | |
363 | help | |
364 | Enables the DMA0 output channel for ser0 (ttyS0). | |
365 | If you do not enable DMA, an interrupt for each character will be | |
366 | used when transmitting data. | |
367 | Normally you want to use DMA, unless you use the DMA channel for | |
368 | something else. | |
369 | ||
370 | endchoice | |
371 | ||
372 | choice | |
373 | prompt "Ser0 DMA in channel " | |
374 | depends on ETRAX_SERIAL_PORT0 | |
375 | default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32 | |
376 | default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10 | |
377 | help | |
378 | What DMA channel to use for ser0. | |
379 | ||
380 | config ETRAX_SERIAL_PORT0_NO_DMA_IN | |
381 | bool "Ser0 uses no DMA for input" | |
382 | help | |
383 | Do not use DMA for ser0 input. | |
384 | ||
385 | config ETRAX_SERIAL_PORT0_DMA7_IN | |
386 | bool "Ser0 uses DMA7 for input" | |
387 | depends on ETRAXFS | |
388 | help | |
389 | Enables the DMA7 input channel for ser0 (ttyS0). | |
390 | If you do not enable DMA, an interrupt for each character will be | |
391 | used when receiving data. | |
392 | Normally you want to use DMA, unless you use the DMA channel for | |
393 | something else. | |
394 | ||
395 | config ETRAX_SERIAL_PORT0_DMA1_IN | |
396 | bool "Ser0 uses DMA1 for input" | |
397 | depends on CRIS_MACH_ARTPEC3 | |
398 | help | |
399 | Enables the DMA1 input channel for ser0 (ttyS0). | |
400 | If you do not enable DMA, an interrupt for each character will be | |
692105b8 | 401 | used when receiving data. |
923dd2a4 JN |
402 | Normally you want to use DMA, unless you use the DMA channel for |
403 | something else. | |
404 | ||
405 | endchoice | |
406 | ||
407 | choice | |
408 | prompt "Ser1 DMA in channel " | |
409 | depends on ETRAX_SERIAL_PORT1 | |
410 | default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32 | |
411 | default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10 | |
412 | help | |
413 | What DMA channel to use for ser1. | |
414 | ||
415 | config ETRAX_SERIAL_PORT1_NO_DMA_IN | |
416 | bool "Ser1 uses no DMA for input" | |
417 | help | |
418 | Do not use DMA for ser1 input. | |
419 | ||
420 | config ETRAX_SERIAL_PORT1_DMA5_IN | |
421 | bool "Ser1 uses DMA5 for input" | |
422 | depends on ETRAX_ARCH_V32 | |
423 | help | |
424 | Enables the DMA5 input channel for ser1 (ttyS1). | |
425 | If you do not enable DMA, an interrupt for each character will be | |
426 | used when receiving data. | |
427 | Normally you want this on, unless you use the DMA channel for | |
428 | something else. | |
429 | ||
430 | config ETRAX_SERIAL_PORT1_DMA9_IN | |
431 | depends on ETRAX_ARCH_V10 | |
432 | bool "Ser1 uses DMA9 for input" | |
433 | ||
434 | endchoice | |
435 | ||
436 | ||
437 | choice | |
438 | prompt "Ser1 DMA out channel" | |
439 | depends on ETRAX_SERIAL_PORT1 | |
440 | default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32 | |
441 | default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10 | |
442 | help | |
443 | What DMA channel to use for ser1. | |
444 | ||
445 | config ETRAX_SERIAL_PORT1_NO_DMA_OUT | |
446 | bool "Ser1 uses no DMA for output" | |
447 | help | |
448 | Do not use DMA for ser1 output. | |
449 | ||
450 | config ETRAX_SERIAL_PORT1_DMA8_OUT | |
451 | depends on ETRAX_ARCH_V10 | |
452 | bool "Ser1 uses DMA8 for output" | |
453 | ||
454 | config ETRAX_SERIAL_PORT1_DMA4_OUT | |
455 | depends on ETRAX_ARCH_V32 | |
456 | bool "Ser1 uses DMA4 for output" | |
457 | help | |
458 | Enables the DMA4 output channel for ser1 (ttyS1). | |
459 | If you do not enable DMA, an interrupt for each character will be | |
460 | used when transmitting data. | |
461 | Normally you want this on, unless you use the DMA channel for | |
462 | something else. | |
463 | ||
464 | endchoice | |
465 | ||
466 | choice | |
467 | prompt "Ser2 DMA out channel" | |
468 | depends on ETRAX_SERIAL_PORT2 | |
469 | default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32 | |
470 | default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10 | |
471 | ||
472 | config ETRAX_SERIAL_PORT2_NO_DMA_OUT | |
473 | bool "Ser2 uses no DMA for output" | |
474 | help | |
475 | Do not use DMA for ser2 output. | |
476 | ||
477 | config ETRAX_SERIAL_PORT2_DMA2_OUT | |
478 | bool "Ser2 uses DMA2 for output" | |
479 | depends on ETRAXFS || ETRAX_ARCH_V10 | |
480 | help | |
481 | Enables the DMA2 output channel for ser2 (ttyS2). | |
482 | If you do not enable DMA, an interrupt for each character will be | |
483 | used when transmitting data. | |
484 | Normally you want to use DMA, unless you use the DMA channel for | |
485 | something else. | |
486 | ||
487 | config ETRAX_SERIAL_PORT2_DMA6_OUT | |
488 | bool "Ser2 uses DMA6 for output" | |
489 | depends on CRIS_MACH_ARTPEC3 | |
490 | help | |
491 | Enables the DMA6 output channel for ser2 (ttyS2). | |
492 | If you do not enable DMA, an interrupt for each character will be | |
493 | used when transmitting data. | |
494 | Normally you want to use DMA, unless you use the DMA channel for | |
495 | something else. | |
496 | ||
497 | endchoice | |
498 | ||
499 | choice | |
500 | prompt "Ser2 DMA in channel" | |
501 | depends on ETRAX_SERIAL_PORT2 | |
502 | default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32 | |
503 | default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10 | |
504 | help | |
505 | What DMA channel to use for ser2. | |
506 | ||
507 | config ETRAX_SERIAL_PORT2_NO_DMA_IN | |
508 | bool "Ser2 uses no DMA for input" | |
509 | help | |
510 | Do not use DMA for ser2 input. | |
511 | ||
512 | config ETRAX_SERIAL_PORT2_DMA3_IN | |
513 | bool "Ser2 uses DMA3 for input" | |
514 | depends on ETRAXFS || ETRAX_ARCH_V10 | |
515 | help | |
516 | Enables the DMA3 input channel for ser2 (ttyS2). | |
517 | If you do not enable DMA, an interrupt for each character will be | |
518 | used when receiving data. | |
519 | Normally you want to use DMA, unless you use the DMA channel for | |
520 | something else. | |
521 | ||
522 | config ETRAX_SERIAL_PORT2_DMA7_IN | |
523 | bool "Ser2 uses DMA7 for input" | |
524 | depends on CRIS_MACH_ARTPEC3 | |
525 | help | |
526 | Enables the DMA7 input channel for ser2 (ttyS2). | |
527 | If you do not enable DMA, an interrupt for each character will be | |
692105b8 | 528 | used when receiving data. |
923dd2a4 JN |
529 | Normally you want to use DMA, unless you use the DMA channel for |
530 | something else. | |
531 | ||
532 | endchoice | |
533 | ||
534 | choice | |
535 | prompt "Ser3 DMA in channel" | |
536 | depends on ETRAX_SERIAL_PORT3 | |
537 | default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32 | |
538 | default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10 | |
539 | help | |
540 | What DMA channel to use for ser3. | |
541 | ||
542 | config ETRAX_SERIAL_PORT3_NO_DMA_IN | |
543 | bool "Ser3 uses no DMA for input" | |
544 | help | |
545 | Do not use DMA for ser3 input. | |
546 | ||
547 | config ETRAX_SERIAL_PORT3_DMA5_IN | |
548 | depends on ETRAX_ARCH_V10 | |
549 | bool "DMA 5" | |
550 | ||
923dd2a4 JN |
551 | endchoice |
552 | ||
553 | choice | |
554 | prompt "Ser3 DMA out channel" | |
555 | depends on ETRAX_SERIAL_PORT3 | |
556 | default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32 | |
557 | default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10 | |
558 | ||
559 | config ETRAX_SERIAL_PORT3_NO_DMA_OUT | |
560 | bool "Ser3 uses no DMA for output" | |
561 | help | |
562 | Do not use DMA for ser3 output. | |
563 | ||
564 | config ETRAX_SERIAL_PORT3_DMA4_OUT | |
565 | depends on ETRAX_ARCH_V10 | |
566 | bool "DMA 4" | |
567 | ||
923dd2a4 JN |
568 | endchoice |
569 | ||
1da177e4 LT |
570 | endmenu |
571 | ||
acf83630 | 572 | source "drivers/Kconfig" |
1da177e4 | 573 | |
1da177e4 LT |
574 | source "fs/Kconfig" |
575 | ||
1da177e4 LT |
576 | source "arch/cris/Kconfig.debug" |
577 | ||
578 | source "security/Kconfig" | |
579 | ||
580 | source "crypto/Kconfig" | |
581 | ||
582 | source "lib/Kconfig" |