]>
Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
2ad2c320 NB |
5 | config HAVE_PATA_PLATFORM |
6 | bool | |
7 | help | |
8 | This is an internal configuration node for any machine that | |
9 | uses pata-platform driver to enable the relevant driver in the | |
10 | configuration structure without having to submit endless patches | |
11 | to update the PATA_PLATFORM entry. | |
12 | ||
b196fc69 | 13 | menuconfig ATA |
097dac91 | 14 | tristate "Serial ATA and Parallel ATA drivers" |
e25df120 | 15 | depends on HAS_IOMEM |
bf2d401b | 16 | depends on BLOCK |
9317fd4c | 17 | depends on !(M32R || M68K) || BROKEN |
81ce3c4b | 18 | select SCSI |
c6fd2807 JG |
19 | ---help--- |
20 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
21 | any other ATA device under Linux, say Y and make sure that you know | |
22 | the name of your ATA host adapter (the card inside your computer | |
23 | that "speaks" the ATA protocol, also called ATA controller), | |
24 | because you will be asked for it. | |
25 | ||
abcdceb9 RD |
26 | NOTE: ATA enables basic SCSI support; *however*, |
27 | 'SCSI disk support', 'SCSI tape support', or | |
28 | 'SCSI CDROM support' may also be needed, | |
29 | depending on your hardware configuration. | |
30 | ||
81ce3c4b JG |
31 | if ATA |
32 | ||
8cdf92a9 DW |
33 | config ATA_NONSTANDARD |
34 | bool | |
35 | default n | |
36 | ||
6521148c RH |
37 | config ATA_VERBOSE_ERROR |
38 | bool "Verbose ATA error reporting" | |
39 | default y | |
40 | help | |
41 | This option adds parsing of ATA command descriptions and error bits | |
42 | in libata kernel output, making it easier to interpret. | |
43 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
44 | if kernel size is more important than ease of debugging. | |
45 | ||
46 | If unsure, say Y. | |
47 | ||
e92351bb | 48 | config ATA_ACPI |
c30484d7 | 49 | bool "ATA ACPI Support" |
e92351bb TH |
50 | depends on ACPI && PCI |
51 | default y | |
52 | help | |
53 | This option adds support for ATA-related ACPI objects. | |
54 | These ACPI objects add the ability to retrieve taskfiles | |
55 | from the ACPI BIOS and write them to the disk controller. | |
56 | These objects may be related to performance, security, | |
57 | power management, or other areas. | |
58 | You can disable this at kernel boot time by using the | |
59 | option libata.noacpi=1 | |
60 | ||
88fcd562 TH |
61 | config SATA_PMP |
62 | bool "SATA Port Multiplier support" | |
63 | default y | |
64 | help | |
f3360ebf JG |
65 | This option adds support for SATA Port Multipliers |
66 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 67 | |
9a7780c9 TH |
68 | comment "Controllers with non-SFF native interface" |
69 | ||
8ad92ba7 | 70 | config SATA_AHCI |
c6fd2807 | 71 | tristate "AHCI SATA support" |
81ce3c4b | 72 | depends on PCI |
c6fd2807 JG |
73 | help |
74 | This option enables support for AHCI Serial ATA. | |
75 | ||
76 | If unsure, say N. | |
77 | ||
1c2a49f6 AV |
78 | config SATA_AHCI_PLATFORM |
79 | tristate "Platform AHCI SATA support" | |
80 | help | |
81 | This option enables support for Platform AHCI Serial ATA | |
82 | controllers. | |
83 | ||
84 | If unsure, say N. | |
85 | ||
9a7780c9 TH |
86 | config SATA_FSL |
87 | tristate "Freescale 3.0Gbps SATA support" | |
88 | depends on FSL_SOC | |
127102ae | 89 | help |
9a7780c9 TH |
90 | This option enables support for Freescale 3.0Gbps SATA controller. |
91 | It can be found on MPC837x and MPC8315. | |
127102ae TH |
92 | |
93 | If unsure, say N. | |
94 | ||
6f791460 TH |
95 | config SATA_INIC162X |
96 | tristate "Initio 162x SATA support" | |
97 | depends on PCI | |
98 | help | |
99 | This option enables support for Initio 162x Serial ATA. | |
100 | ||
02cdfcf0 DM |
101 | config SATA_ACARD_AHCI |
102 | tristate "ACard AHCI variant (ATP 8620)" | |
103 | depends on PCI | |
104 | help | |
105 | This option enables support for Acard. | |
106 | ||
107 | If unsure, say N. | |
108 | ||
9a7780c9 TH |
109 | config SATA_SIL24 |
110 | tristate "Silicon Image 3124/3132 SATA support" | |
111 | depends on PCI | |
127102ae | 112 | help |
9a7780c9 | 113 | This option enables support for Silicon Image 3124/3132 Serial ATA. |
127102ae TH |
114 | |
115 | If unsure, say N. | |
116 | ||
117 | config ATA_SFF | |
118 | bool "ATA SFF support" | |
119 | default y | |
120 | help | |
121 | This option adds support for ATA controllers with SFF | |
122 | compliant or similar programming interface. | |
123 | ||
f3360ebf JG |
124 | SFF is the legacy IDE interface that has been around since |
125 | the dawn of time. Almost all PATA controllers have an | |
126 | SFF interface. Many SATA controllers have an SFF interface | |
127 | when configured into a legacy compatibility mode. | |
128 | ||
129 | For users with exclusively modern controllers like AHCI, | |
130 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 131 | disable this unneeded SFF support. |
f3360ebf JG |
132 | |
133 | If unsure, say Y. | |
134 | ||
127102ae TH |
135 | if ATA_SFF |
136 | ||
9a7780c9 TH |
137 | comment "SFF controllers with custom DMA interface" |
138 | ||
139 | config PDC_ADMA | |
140 | tristate "Pacific Digital ADMA support" | |
81ce3c4b | 141 | depends on PCI |
c6fd2807 | 142 | help |
9a7780c9 TH |
143 | This option enables support for Pacific Digital ADMA controllers |
144 | ||
145 | If unsure, say N. | |
146 | ||
9a7780c9 TH |
147 | config PATA_OCTEON_CF |
148 | tristate "OCTEON Boot Bus Compact Flash support" | |
149 | depends on CPU_CAVIUM_OCTEON | |
150 | help | |
151 | This option enables a polled compact flash driver for use with | |
152 | compact flash cards attached to the OCTEON boot bus. | |
153 | ||
154 | If unsure, say N. | |
155 | ||
156 | config SATA_QSTOR | |
157 | tristate "Pacific Digital SATA QStor support" | |
158 | depends on PCI | |
159 | help | |
160 | This option enables support for Pacific Digital Serial ATA QStor. | |
161 | ||
162 | If unsure, say N. | |
163 | ||
164 | config SATA_SX4 | |
165 | tristate "Promise SATA SX4 support (Experimental)" | |
166 | depends on PCI && EXPERIMENTAL | |
167 | help | |
168 | This option enables support for Promise Serial ATA SX4. | |
c6fd2807 JG |
169 | |
170 | If unsure, say N. | |
171 | ||
9a7780c9 TH |
172 | config ATA_BMDMA |
173 | bool "ATA BMDMA support" | |
174 | default y | |
175 | help | |
176 | This option adds support for SFF ATA controllers with BMDMA | |
ed4e2f80 SR |
177 | capability. BMDMA stands for bus-master DMA and is the |
178 | de facto DMA interface for SFF controllers. | |
9a7780c9 | 179 | |
ed4e2f80 | 180 | If unsure, say Y. |
9a7780c9 TH |
181 | |
182 | if ATA_BMDMA | |
183 | ||
184 | comment "SATA SFF controllers with BMDMA" | |
185 | ||
8ad92ba7 | 186 | config ATA_PIIX |
2c7620d5 | 187 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 188 | depends on PCI |
c6fd2807 | 189 | help |
2bfc3611 | 190 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 AC |
191 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
192 | host controllers. | |
c6fd2807 JG |
193 | |
194 | If unsure, say N. | |
195 | ||
62936009 RS |
196 | config SATA_DWC |
197 | tristate "DesignWare Cores SATA support" | |
198 | depends on 460EX | |
199 | help | |
200 | This option enables support for the on-chip SATA controller of the | |
201 | AppliedMicro processor 460EX. | |
202 | ||
203 | If unsure, say N. | |
204 | ||
14080fa6 SS |
205 | config SATA_DWC_DEBUG |
206 | bool "Debugging driver version" | |
207 | depends on SATA_DWC | |
208 | help | |
209 | This option enables debugging output in the driver. | |
210 | ||
211 | config SATA_DWC_VDEBUG | |
212 | bool "Verbose debug output" | |
213 | depends on SATA_DWC_DEBUG | |
214 | help | |
215 | This option enables the taskfile dumping and NCQ debugging. | |
216 | ||
8ad92ba7 | 217 | config SATA_MV |
f9228c7f | 218 | tristate "Marvell SATA support" |
c6fd2807 JG |
219 | help |
220 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
221 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
222 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
223 | |
224 | If unsure, say N. | |
225 | ||
8ad92ba7 | 226 | config SATA_NV |
c6fd2807 | 227 | tristate "NVIDIA SATA support" |
81ce3c4b | 228 | depends on PCI |
c6fd2807 JG |
229 | help |
230 | This option enables support for NVIDIA Serial ATA. | |
231 | ||
232 | If unsure, say N. | |
233 | ||
8ad92ba7 | 234 | config SATA_PROMISE |
c6fd2807 | 235 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 236 | depends on PCI |
c6fd2807 JG |
237 | help |
238 | This option enables support for Promise Serial ATA TX2/TX4. | |
239 | ||
240 | If unsure, say N. | |
241 | ||
8ad92ba7 | 242 | config SATA_SIL |
c6fd2807 | 243 | tristate "Silicon Image SATA support" |
81ce3c4b | 244 | depends on PCI |
c6fd2807 JG |
245 | help |
246 | This option enables support for Silicon Image Serial ATA. | |
247 | ||
248 | If unsure, say N. | |
249 | ||
8ad92ba7 | 250 | config SATA_SIS |
9b14dec5 | 251 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 252 | depends on PCI |
9b14dec5 | 253 | select PATA_SIS |
c6fd2807 | 254 | help |
a617c09f | 255 | This option enables support for SiS Serial ATA on |
9b14dec5 AC |
256 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
257 | The PATA support for SiS 180 requires additionally to | |
258 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
259 | If unsure, say N. |
260 | ||
9a7780c9 TH |
261 | config SATA_SVW |
262 | tristate "ServerWorks Frodo / Apple K2 SATA support" | |
263 | depends on PCI | |
264 | help | |
265 | This option enables support for Broadcom/Serverworks/Apple K2 | |
266 | SATA support. | |
267 | ||
268 | If unsure, say N. | |
269 | ||
8ad92ba7 | 270 | config SATA_ULI |
c6fd2807 | 271 | tristate "ULi Electronics SATA support" |
81ce3c4b | 272 | depends on PCI |
c6fd2807 JG |
273 | help |
274 | This option enables support for ULi Electronics SATA. | |
275 | ||
276 | If unsure, say N. | |
277 | ||
8ad92ba7 | 278 | config SATA_VIA |
c6fd2807 | 279 | tristate "VIA SATA support" |
81ce3c4b | 280 | depends on PCI |
c6fd2807 JG |
281 | help |
282 | This option enables support for VIA Serial ATA. | |
283 | ||
284 | If unsure, say N. | |
285 | ||
8ad92ba7 | 286 | config SATA_VITESSE |
c6fd2807 | 287 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 288 | depends on PCI |
c6fd2807 JG |
289 | help |
290 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
291 | ||
292 | If unsure, say N. | |
293 | ||
9a7780c9 | 294 | comment "PATA SFF controllers with BMDMA" |
025621f9 | 295 | |
669a5db4 | 296 | config PATA_ALI |
e3389cbc AC |
297 | tristate "ALi PATA support" |
298 | depends on PCI | |
669a5db4 JG |
299 | help |
300 | This option enables support for the ALi ATA interfaces | |
301 | found on the many ALi chipsets. | |
302 | ||
303 | If unsure, say N. | |
304 | ||
305 | config PATA_AMD | |
942d0947 | 306 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
307 | depends on PCI |
308 | help | |
309 | This option enables support for the AMD and NVidia PATA | |
310 | interfaces found on the chipsets for Athlon/Athlon64. | |
311 | ||
312 | If unsure, say N. | |
313 | ||
314 | config PATA_ARTOP | |
c645fd34 AC |
315 | tristate "ARTOP 6210/6260 PATA support" |
316 | depends on PCI | |
669a5db4 JG |
317 | help |
318 | This option enables support for ARTOP PATA controllers. | |
319 | ||
320 | If unsure, say N. | |
321 | ||
9a7780c9 TH |
322 | config PATA_ATIIXP |
323 | tristate "ATI PATA support" | |
d15d6e6c JJIL |
324 | depends on PCI |
325 | help | |
9a7780c9 TH |
326 | This option enables support for the ATI ATA interfaces |
327 | found on the many ATI chipsets. | |
7c9ef8e4 KNG |
328 | |
329 | If unsure, say N. | |
330 | ||
9a7780c9 TH |
331 | config PATA_ATP867X |
332 | tristate "ARTOP/Acard ATP867X PATA support" | |
c645fd34 | 333 | depends on PCI |
669a5db4 | 334 | help |
9a7780c9 TH |
335 | This option enables support for ARTOP/Acard ATP867X PATA |
336 | controllers. | |
669a5db4 JG |
337 | |
338 | If unsure, say N. | |
339 | ||
9a7780c9 TH |
340 | config PATA_BF54X |
341 | tristate "Blackfin 54x ATAPI support" | |
342 | depends on BF542 || BF548 || BF549 | |
b2248dac | 343 | help |
9a7780c9 TH |
344 | This option enables support for the built-in ATAPI controller on |
345 | Blackfin 54x family chips. | |
b2248dac AC |
346 | |
347 | If unsure, say N. | |
348 | ||
669a5db4 | 349 | config PATA_CMD64X |
c645fd34 AC |
350 | tristate "CMD64x PATA support" |
351 | depends on PCI | |
669a5db4 JG |
352 | help |
353 | This option enables support for the CMD64x series chips | |
354 | except for the CMD640. | |
355 | ||
356 | If unsure, say N. | |
357 | ||
358 | config PATA_CS5520 | |
359 | tristate "CS5510/5520 PATA support" | |
360 | depends on PCI | |
361 | help | |
362 | This option enables support for the Cyrix 5510/5520 | |
363 | companion chip used with the MediaGX/Geode processor family. | |
364 | ||
365 | If unsure, say N. | |
366 | ||
367 | config PATA_CS5530 | |
e3389cbc AC |
368 | tristate "CS5530 PATA support" |
369 | depends on PCI | |
669a5db4 JG |
370 | help |
371 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
372 | companion chip used with the MediaGX/Geode processor family. | |
373 | ||
374 | If unsure, say N. | |
375 | ||
376 | config PATA_CS5535 | |
377 | tristate "CS5535 PATA support (Experimental)" | |
378 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
379 | help | |
380 | This option enables support for the NatSemi/AMD CS5535 | |
381 | companion chip used with the Geode processor family. | |
382 | ||
383 | If unsure, say N. | |
384 | ||
3957df61 | 385 | config PATA_CS5536 |
e3389cbc | 386 | tristate "CS5536 PATA support" |
9272dcc2 | 387 | depends on PCI |
3957df61 MP |
388 | help |
389 | This option enables support for the AMD CS5536 | |
390 | companion chip used with the Geode LX processor family. | |
391 | ||
392 | If unsure, say N. | |
393 | ||
669a5db4 JG |
394 | config PATA_CYPRESS |
395 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
396 | depends on PCI && EXPERIMENTAL | |
397 | help | |
398 | This option enables support for the Cypress/Contaq CY82C693 | |
399 | chipset found in some Alpha systems | |
400 | ||
401 | If unsure, say N. | |
402 | ||
403 | config PATA_EFAR | |
404 | tristate "EFAR SLC90E66 support" | |
405 | depends on PCI | |
406 | help | |
407 | This option enables support for the EFAR SLC90E66 | |
408 | IDE controller found on some older machines. | |
409 | ||
410 | If unsure, say N. | |
411 | ||
669a5db4 | 412 | config PATA_HPT366 |
c645fd34 AC |
413 | tristate "HPT 366/368 PATA support" |
414 | depends on PCI | |
669a5db4 JG |
415 | help |
416 | This option enables support for the HPT 366 and 368 | |
417 | PATA controllers via the new ATA layer. | |
418 | ||
419 | If unsure, say N. | |
420 | ||
421 | config PATA_HPT37X | |
be315d46 AC |
422 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
423 | depends on PCI | |
669a5db4 JG |
424 | help |
425 | This option enables support for the majority of the later HPT | |
426 | PATA controllers via the new ATA layer. | |
427 | ||
428 | If unsure, say N. | |
429 | ||
430 | config PATA_HPT3X2N | |
0ca646db | 431 | tristate "HPT 371N/372N/302N PATA support" |
be315d46 | 432 | depends on PCI |
669a5db4 JG |
433 | help |
434 | This option enables support for the N variant HPT PATA | |
0ca646db | 435 | controllers via the new ATA layer. |
669a5db4 JG |
436 | |
437 | If unsure, say N. | |
438 | ||
439 | config PATA_HPT3X3 | |
66e7da4e | 440 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
441 | depends on PCI |
442 | help | |
443 | This option enables support for the HPT 343/363 | |
444 | PATA controllers via the new ATA layer | |
445 | ||
446 | If unsure, say N. | |
447 | ||
66e7da4e | 448 | config PATA_HPT3X3_DMA |
be315d46 | 449 | bool "HPT 343/363 DMA support" |
66e7da4e AC |
450 | depends on PATA_HPT3X3 |
451 | help | |
452 | This option enables DMA support for the HPT343/363 | |
453 | controllers. Enable with care as there are still some | |
454 | problems with DMA on this chipset. | |
455 | ||
9a7780c9 TH |
456 | config PATA_ICSIDE |
457 | tristate "Acorn ICS PATA support" | |
458 | depends on ARM && ARCH_ACORN | |
669a5db4 | 459 | help |
9a7780c9 TH |
460 | On Acorn systems, say Y here if you wish to use the ICS PATA |
461 | interface card. This is not required for ICS partition support. | |
462 | If you are unsure, say N to this. | |
463 | ||
464 | config PATA_IT8213 | |
465 | tristate "IT8213 PATA support (Experimental)" | |
466 | depends on PCI && EXPERIMENTAL | |
467 | help | |
468 | This option enables support for the ITE 821 PATA | |
469 | controllers via the new ATA layer. | |
669a5db4 JG |
470 | |
471 | If unsure, say N. | |
472 | ||
669a5db4 | 473 | config PATA_IT821X |
942d0947 AC |
474 | tristate "IT8211/2 PATA support" |
475 | depends on PCI | |
669a5db4 JG |
476 | help |
477 | This option enables support for the ITE 8211 and 8212 | |
478 | PATA controllers via the new ATA layer, including RAID | |
479 | mode. | |
480 | ||
481 | If unsure, say N. | |
482 | ||
406176ee JG |
483 | config PATA_JMICRON |
484 | tristate "JMicron PATA support" | |
485 | depends on PCI | |
486 | help | |
487 | Enable support for the JMicron IDE controller, via the new | |
488 | ATA layer. | |
489 | ||
490 | If unsure, say N. | |
491 | ||
9a7780c9 TH |
492 | config PATA_MACIO |
493 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
494 | depends on PPC_PMAC | |
669a5db4 | 495 | help |
9a7780c9 TH |
496 | Most IDE capable PowerMacs have IDE busses driven by a variant |
497 | of this controller which is part of the Apple chipset used on | |
498 | most PowerMac models. Some models have multiple busses using | |
499 | different chipsets, though generally, MacIO is one of them. | |
669a5db4 | 500 | |
75742cb4 AC |
501 | config PATA_MARVELL |
502 | tristate "Marvell PATA support via legacy mode" | |
503 | depends on PCI | |
504 | help | |
5b66c829 AC |
505 | This option enables limited support for the Marvell 88SE61xx ATA |
506 | controllers. If you wish to use only the SATA ports then select | |
507 | the AHCI driver alone. If you wish to the use the PATA port or | |
508 | both SATA and PATA include this driver. | |
75742cb4 AC |
509 | |
510 | If unsure, say N. | |
511 | ||
869934ad WS |
512 | config PATA_MPC52xx |
513 | tristate "Freescale MPC52xx SoC internal IDE" | |
514 | depends on PPC_MPC52xx && PPC_BESTCOMM | |
515 | select PPC_BESTCOMM_ATA | |
516 | help | |
517 | This option enables support for integrated IDE controller | |
518 | of the Freescale MPC52xx SoC. | |
519 | ||
520 | If unsure, say N. | |
521 | ||
669a5db4 JG |
522 | config PATA_NETCELL |
523 | tristate "NETCELL Revolution RAID support" | |
524 | depends on PCI | |
525 | help | |
526 | This option enables support for the Netcell Revolution RAID | |
527 | PATA controller. | |
528 | ||
529 | If unsure, say N. | |
530 | ||
51dbd490 | 531 | config PATA_NINJA32 |
be315d46 AC |
532 | tristate "Ninja32/Delkin Cardbus ATA support" |
533 | depends on PCI | |
51dbd490 AC |
534 | help |
535 | This option enables support for the Ninja32, Delkin and | |
536 | possibly other brands of Cardbus ATA adapter | |
537 | ||
538 | If unsure, say N. | |
539 | ||
c4b5b7b6 | 540 | config PATA_NS87415 |
e3389cbc AC |
541 | tristate "Nat Semi NS87415 PATA support" |
542 | depends on PCI | |
c4b5b7b6 AC |
543 | help |
544 | This option enables support for the National Semiconductor | |
545 | NS87415 PCI-IDE controller. | |
546 | ||
547 | If unsure, say N. | |
548 | ||
9a7780c9 TH |
549 | config PATA_OLDPIIX |
550 | tristate "Intel PATA old PIIX support" | |
551 | depends on PCI | |
669a5db4 | 552 | help |
9a7780c9 | 553 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
554 | |
555 | If unsure, say N. | |
556 | ||
557 | config PATA_OPTIDMA | |
516e72cb | 558 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
559 | depends on PCI && EXPERIMENTAL |
560 | help | |
561 | This option enables DMA/PIO support for the later OPTi | |
562 | controllers found on some old motherboards and in some | |
3dde6ad8 | 563 | laptops. |
669a5db4 JG |
564 | |
565 | If unsure, say N. | |
566 | ||
be315d46 AC |
567 | config PATA_PDC2027X |
568 | tristate "Promise PATA 2027x support" | |
569 | depends on PCI | |
570 | help | |
571 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
572 | ||
573 | If unsure, say N. | |
574 | ||
669a5db4 | 575 | config PATA_PDC_OLD |
e3389cbc AC |
576 | tristate "Older Promise PATA controller support" |
577 | depends on PCI | |
669a5db4 JG |
578 | help |
579 | This option enables support for the Promise 20246, 20262, 20263, | |
580 | 20265 and 20267 adapters. | |
581 | ||
582 | If unsure, say N. | |
583 | ||
669a5db4 | 584 | config PATA_RADISYS |
e3389cbc | 585 | tristate "RADISYS 82600 PATA support (Experimental)" |
669a5db4 JG |
586 | depends on PCI && EXPERIMENTAL |
587 | help | |
588 | This option enables support for the RADISYS 82600 | |
589 | PATA controllers via the new ATA layer | |
590 | ||
591 | If unsure, say N. | |
592 | ||
6b406782 AC |
593 | config PATA_RDC |
594 | tristate "RDC PATA support" | |
595 | depends on PCI | |
596 | help | |
597 | This option enables basic support for the later RDC PATA controllers | |
598 | controllers via the new ATA layer. For the RDC 1010, you need to | |
599 | enable the IT821X driver instead. | |
600 | ||
601 | If unsure, say N. | |
602 | ||
9a7780c9 TH |
603 | config PATA_SC1200 |
604 | tristate "SC1200 PATA support" | |
669a5db4 JG |
605 | depends on PCI |
606 | help | |
9a7780c9 TH |
607 | This option enables support for the NatSemi/AMD SC1200 SoC |
608 | companion chip used with the Geode processor family. | |
669a5db4 JG |
609 | |
610 | If unsure, say N. | |
611 | ||
9a7780c9 TH |
612 | config PATA_SCC |
613 | tristate "Toshiba's Cell Reference Set IDE support" | |
614 | depends on PCI && PPC_CELLEB | |
615 | help | |
616 | This option enables support for the built-in IDE controller on | |
617 | Toshiba Cell Reference Board. | |
618 | ||
619 | If unsure, say N. | |
620 | ||
621 | config PATA_SCH | |
622 | tristate "Intel SCH PATA support" | |
e3389cbc | 623 | depends on PCI |
669a5db4 | 624 | help |
9a7780c9 TH |
625 | This option enables support for Intel SCH PATA on the Intel |
626 | SCH (US15W, US15L, UL11L) series host controllers. | |
669a5db4 JG |
627 | |
628 | If unsure, say N. | |
629 | ||
630 | config PATA_SERVERWORKS | |
942d0947 AC |
631 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
632 | depends on PCI | |
669a5db4 JG |
633 | help |
634 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
635 | HT1000 PATA controllers, via the new ATA layer. | |
636 | ||
637 | If unsure, say N. | |
638 | ||
669a5db4 JG |
639 | config PATA_SIL680 |
640 | tristate "CMD / Silicon Image 680 PATA support" | |
641 | depends on PCI | |
642 | help | |
643 | This option enables support for CMD / Silicon Image 680 PATA. | |
644 | ||
645 | If unsure, say N. | |
646 | ||
647 | config PATA_SIS | |
e3389cbc AC |
648 | tristate "SiS PATA support" |
649 | depends on PCI | |
669a5db4 JG |
650 | help |
651 | This option enables support for SiS PATA controllers | |
652 | ||
653 | If unsure, say N. | |
654 | ||
8e182a90 AC |
655 | config PATA_TOSHIBA |
656 | tristate "Toshiba Piccolo support (Experimental)" | |
657 | depends on PCI && EXPERIMENTAL | |
658 | help | |
659 | Support for the Toshiba Piccolo controllers. Currently only the | |
660 | primary channel is supported by this driver. | |
661 | ||
662 | If unsure, say N. | |
663 | ||
9a7780c9 TH |
664 | config PATA_TRIFLEX |
665 | tristate "Compaq Triflex PATA support" | |
666 | depends on PCI | |
667 | help | |
668 | Enable support for the Compaq 'Triflex' IDE controller as found | |
669 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
670 | ||
671 | If unsure, say N. | |
672 | ||
669a5db4 JG |
673 | config PATA_VIA |
674 | tristate "VIA PATA support" | |
675 | depends on PCI | |
676 | help | |
677 | This option enables support for the VIA PATA interfaces | |
678 | found on the many VIA chipsets. | |
679 | ||
680 | If unsure, say N. | |
681 | ||
2dc6c6f1 MV |
682 | config PATA_PXA |
683 | tristate "PXA DMA-capable PATA support" | |
684 | depends on ARCH_PXA | |
685 | help | |
686 | This option enables support for harddrive attached to PXA CPU's bus. | |
687 | ||
688 | NOTE: This driver utilizes PXA DMA controller, in case your hardware | |
689 | is not capable of doing MWDMA, use pata_platform instead. | |
690 | ||
691 | If unsure, say N. | |
692 | ||
669a5db4 JG |
693 | config PATA_WINBOND |
694 | tristate "Winbond SL82C105 PATA support" | |
695 | depends on PCI | |
696 | help | |
697 | This option enables support for SL82C105 PATA devices found in the | |
698 | Netwinder and some other systems | |
699 | ||
700 | If unsure, say N. | |
701 | ||
9a7780c9 TH |
702 | endif # ATA_BMDMA |
703 | ||
704 | comment "PIO-only SFF controllers" | |
705 | ||
706 | config PATA_AT32 | |
707 | tristate "Atmel AVR32 PATA support (Experimental)" | |
708 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
7e45b0e5 | 709 | help |
9a7780c9 TH |
710 | This option enables support for the IDE devices on the |
711 | Atmel AT32AP platform. | |
712 | ||
713 | If unsure, say N. | |
714 | ||
715 | config PATA_AT91 | |
716 | tristate "PATA support for AT91SAM9260" | |
717 | depends on ARM && ARCH_AT91 | |
718 | help | |
719 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
720 | ||
721 | If unsure, say N. | |
722 | ||
723 | config PATA_CMD640_PCI | |
724 | tristate "CMD640 PCI PATA support (Experimental)" | |
725 | depends on PCI && EXPERIMENTAL | |
726 | help | |
727 | This option enables support for the CMD640 PCI IDE | |
728 | interface chip. Only the primary channel is currently | |
729 | supported. | |
730 | ||
731 | If unsure, say N. | |
732 | ||
733 | config PATA_ISAPNP | |
734 | tristate "ISA Plug and Play PATA support" | |
735 | depends on ISAPNP | |
736 | help | |
737 | This option enables support for ISA plug & play ATA | |
738 | controllers such as those found on old soundcards. | |
739 | ||
740 | If unsure, say N. | |
741 | ||
742 | config PATA_IXP4XX_CF | |
743 | tristate "IXP4XX Compact Flash support" | |
744 | depends on ARCH_IXP4XX | |
745 | help | |
746 | This option enables support for a Compact Flash connected on | |
747 | the ixp4xx expansion bus. This driver had been written for | |
748 | Loft/Avila boards in mind but can work with others. | |
749 | ||
750 | If unsure, say N. | |
751 | ||
752 | config PATA_MPIIX | |
753 | tristate "Intel PATA MPIIX support" | |
754 | depends on PCI | |
755 | help | |
756 | This option enables support for MPIIX PATA support. | |
757 | ||
758 | If unsure, say N. | |
759 | ||
760 | config PATA_NS87410 | |
761 | tristate "Nat Semi NS87410 PATA support" | |
762 | depends on PCI | |
763 | help | |
764 | This option enables support for the National Semiconductor | |
765 | NS87410 PCI-IDE controller. | |
766 | ||
767 | If unsure, say N. | |
768 | ||
769 | config PATA_OPTI | |
770 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
771 | depends on PCI && EXPERIMENTAL | |
772 | help | |
773 | This option enables full PIO support for the early Opti ATA | |
774 | controllers found on some old motherboards. | |
775 | ||
776 | If unsure, say N. | |
777 | ||
778 | config PATA_PALMLD | |
779 | tristate "Palm LifeDrive PATA support" | |
780 | depends on MACH_PALMLD | |
781 | help | |
782 | This option enables support for Palm LifeDrive's internal ATA | |
783 | port via the new ATA layer. | |
784 | ||
785 | If unsure, say N. | |
786 | ||
787 | config PATA_PCMCIA | |
788 | tristate "PCMCIA PATA support" | |
789 | depends on PCMCIA | |
790 | help | |
791 | This option enables support for PCMCIA ATA interfaces, including | |
792 | compact flash card adapters via the new ATA layer. | |
793 | ||
794 | If unsure, say N. | |
7e45b0e5 | 795 | |
a20c9e82 PM |
796 | config PATA_PLATFORM |
797 | tristate "Generic platform device PATA support" | |
6a108a14 | 798 | depends on EXPERT || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
799 | help |
800 | This option enables support for generic directly connected ATA | |
801 | devices commonly found on embedded systems. | |
802 | ||
803 | If unsure, say N. | |
61f71621 AV |
804 | |
805 | config PATA_OF_PLATFORM | |
806 | tristate "OpenFirmware platform device PATA support" | |
807 | depends on PATA_PLATFORM && PPC_OF | |
808 | help | |
809 | This option enables support for generic directly connected ATA | |
810 | devices commonly found on embedded systems with OpenFirmware | |
811 | bindings. | |
812 | ||
813 | If unsure, say N. | |
a20c9e82 | 814 | |
9a7780c9 TH |
815 | config PATA_QDI |
816 | tristate "QDI VLB PATA support" | |
817 | depends on ISA | |
73b6a2be | 818 | help |
9a7780c9 | 819 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
73b6a2be | 820 | |
9a7780c9 TH |
821 | config PATA_RB532 |
822 | tristate "RouterBoard 532 PATA CompactFlash support" | |
823 | depends on MIKROTIK_RB532 | |
0df0d0a0 | 824 | help |
9a7780c9 TH |
825 | This option enables support for the RouterBoard 532 |
826 | PATA CompactFlash controller. | |
0df0d0a0 AZ |
827 | |
828 | If unsure, say N. | |
829 | ||
9a7780c9 TH |
830 | config PATA_RZ1000 |
831 | tristate "PC Tech RZ1000 PATA support" | |
832 | depends on PCI | |
3c929c6f | 833 | help |
9a7780c9 TH |
834 | This option enables basic support for the PC Tech RZ1000/1 |
835 | PATA controllers via the new ATA layer | |
3c929c6f DD |
836 | |
837 | If unsure, say N. | |
838 | ||
155bf48f AK |
839 | config PATA_SAMSUNG_CF |
840 | tristate "Samsung SoC PATA support" | |
841 | depends on SAMSUNG_DEV_IDE | |
842 | help | |
843 | This option enables basic support for Samsung's S3C/S5P board | |
844 | PATA controllers via the new ATA layer | |
845 | ||
846 | If unsure, say N. | |
847 | ||
9a7780c9 TH |
848 | config PATA_WINBOND_VLB |
849 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
850 | depends on ISA && EXPERIMENTAL | |
6d981b9a | 851 | select PATA_LEGACY |
a619f981 | 852 | help |
9a7780c9 TH |
853 | Support for the Winbond W83759A controller on Vesa Local Bus |
854 | systems. | |
a619f981 | 855 | |
9a7780c9 | 856 | comment "Generic fallback / legacy drivers" |
a619f981 | 857 | |
9a7780c9 TH |
858 | config PATA_ACPI |
859 | tristate "ACPI firmware driver for PATA" | |
860 | depends on ATA_ACPI && ATA_BMDMA | |
07ab85de | 861 | help |
9a7780c9 TH |
862 | This option enables an ACPI method driver which drives |
863 | motherboard PATA controller interfaces through the ACPI | |
864 | firmware in the BIOS. This driver can sometimes handle | |
865 | otherwise unsupported hardware. | |
07ab85de | 866 | |
9a7780c9 TH |
867 | config ATA_GENERIC |
868 | tristate "Generic ATA support" | |
869 | depends on PCI && ATA_BMDMA | |
d830d173 | 870 | help |
9a7780c9 TH |
871 | This option enables support for generic BIOS configured |
872 | ATA controllers via the new ATA layer | |
d830d173 SZ |
873 | |
874 | If unsure, say N. | |
875 | ||
9a7780c9 TH |
876 | config PATA_LEGACY |
877 | tristate "Legacy ISA PATA support (Experimental)" | |
878 | depends on (ISA || PCI) && EXPERIMENTAL | |
88358ab0 | 879 | help |
9a7780c9 TH |
880 | This option enables support for ISA/VLB/PCI bus legacy PATA |
881 | ports and allows them to be accessed via the new ATA layer. | |
88358ab0 | 882 | |
9a7780c9 | 883 | If unsure, say N. |
88358ab0 | 884 | |
127102ae | 885 | endif # ATA_SFF |
b196fc69 | 886 | endif # ATA |