]>
Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 | 5 | menuconfig ATA |
097dac91 | 6 | tristate "Serial ATA and Parallel ATA drivers" |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
81ce3c4b | 10 | select SCSI |
c6fd2807 JG |
11 | ---help--- |
12 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
13 | any other ATA device under Linux, say Y and make sure that you know | |
14 | the name of your ATA host adapter (the card inside your computer | |
15 | that "speaks" the ATA protocol, also called ATA controller), | |
16 | because you will be asked for it. | |
17 | ||
abcdceb9 RD |
18 | NOTE: ATA enables basic SCSI support; *however*, |
19 | 'SCSI disk support', 'SCSI tape support', or | |
20 | 'SCSI CDROM support' may also be needed, | |
21 | depending on your hardware configuration. | |
22 | ||
81ce3c4b JG |
23 | if ATA |
24 | ||
8cdf92a9 DW |
25 | config ATA_NONSTANDARD |
26 | bool | |
27 | default n | |
28 | ||
6521148c RH |
29 | config ATA_VERBOSE_ERROR |
30 | bool "Verbose ATA error reporting" | |
31 | default y | |
32 | help | |
33 | This option adds parsing of ATA command descriptions and error bits | |
34 | in libata kernel output, making it easier to interpret. | |
35 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
36 | if kernel size is more important than ease of debugging. | |
37 | ||
38 | If unsure, say Y. | |
39 | ||
e92351bb | 40 | config ATA_ACPI |
c30484d7 | 41 | bool "ATA ACPI Support" |
e92351bb TH |
42 | depends on ACPI && PCI |
43 | default y | |
44 | help | |
45 | This option adds support for ATA-related ACPI objects. | |
46 | These ACPI objects add the ability to retrieve taskfiles | |
47 | from the ACPI BIOS and write them to the disk controller. | |
48 | These objects may be related to performance, security, | |
49 | power management, or other areas. | |
50 | You can disable this at kernel boot time by using the | |
51 | option libata.noacpi=1 | |
52 | ||
88fcd562 TH |
53 | config SATA_PMP |
54 | bool "SATA Port Multiplier support" | |
55 | default y | |
56 | help | |
f3360ebf JG |
57 | This option adds support for SATA Port Multipliers |
58 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 59 | |
8ad92ba7 | 60 | config SATA_AHCI |
c6fd2807 | 61 | tristate "AHCI SATA support" |
81ce3c4b | 62 | depends on PCI |
c6fd2807 JG |
63 | help |
64 | This option enables support for AHCI Serial ATA. | |
65 | ||
66 | If unsure, say N. | |
67 | ||
1c2a49f6 AV |
68 | config SATA_AHCI_PLATFORM |
69 | tristate "Platform AHCI SATA support" | |
70 | help | |
71 | This option enables support for Platform AHCI Serial ATA | |
72 | controllers. | |
73 | ||
74 | If unsure, say N. | |
75 | ||
127102ae TH |
76 | config SATA_SIL24 |
77 | tristate "Silicon Image 3124/3132 SATA support" | |
78 | depends on PCI | |
79 | help | |
80 | This option enables support for Silicon Image 3124/3132 Serial ATA. | |
81 | ||
82 | If unsure, say N. | |
83 | ||
84 | config SATA_FSL | |
85 | tristate "Freescale 3.0Gbps SATA support" | |
86 | depends on FSL_SOC | |
87 | help | |
88 | This option enables support for Freescale 3.0Gbps SATA controller. | |
89 | It can be found on MPC837x and MPC8315. | |
90 | ||
91 | If unsure, say N. | |
92 | ||
93 | config ATA_SFF | |
94 | bool "ATA SFF support" | |
95 | default y | |
96 | help | |
97 | This option adds support for ATA controllers with SFF | |
98 | compliant or similar programming interface. | |
99 | ||
f3360ebf JG |
100 | SFF is the legacy IDE interface that has been around since |
101 | the dawn of time. Almost all PATA controllers have an | |
102 | SFF interface. Many SATA controllers have an SFF interface | |
103 | when configured into a legacy compatibility mode. | |
104 | ||
105 | For users with exclusively modern controllers like AHCI, | |
106 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 107 | disable this unneeded SFF support. |
f3360ebf JG |
108 | |
109 | If unsure, say Y. | |
110 | ||
127102ae TH |
111 | if ATA_SFF |
112 | ||
8ad92ba7 | 113 | config SATA_SVW |
c6fd2807 | 114 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
81ce3c4b | 115 | depends on PCI |
c6fd2807 JG |
116 | help |
117 | This option enables support for Broadcom/Serverworks/Apple K2 | |
118 | SATA support. | |
119 | ||
120 | If unsure, say N. | |
121 | ||
8ad92ba7 | 122 | config ATA_PIIX |
2c7620d5 | 123 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 124 | depends on PCI |
c6fd2807 | 125 | help |
2bfc3611 | 126 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 AC |
127 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
128 | host controllers. | |
c6fd2807 JG |
129 | |
130 | If unsure, say N. | |
131 | ||
8ad92ba7 | 132 | config SATA_MV |
f9228c7f | 133 | tristate "Marvell SATA support" |
c6fd2807 JG |
134 | help |
135 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
136 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
137 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
138 | |
139 | If unsure, say N. | |
140 | ||
8ad92ba7 | 141 | config SATA_NV |
c6fd2807 | 142 | tristate "NVIDIA SATA support" |
81ce3c4b | 143 | depends on PCI |
c6fd2807 JG |
144 | help |
145 | This option enables support for NVIDIA Serial ATA. | |
146 | ||
147 | If unsure, say N. | |
148 | ||
8ad92ba7 | 149 | config PDC_ADMA |
c6fd2807 | 150 | tristate "Pacific Digital ADMA support" |
81ce3c4b | 151 | depends on PCI |
c6fd2807 JG |
152 | help |
153 | This option enables support for Pacific Digital ADMA controllers | |
154 | ||
155 | If unsure, say N. | |
156 | ||
8ad92ba7 | 157 | config SATA_QSTOR |
c6fd2807 | 158 | tristate "Pacific Digital SATA QStor support" |
81ce3c4b | 159 | depends on PCI |
c6fd2807 JG |
160 | help |
161 | This option enables support for Pacific Digital Serial ATA QStor. | |
162 | ||
163 | If unsure, say N. | |
164 | ||
8ad92ba7 | 165 | config SATA_PROMISE |
c6fd2807 | 166 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 167 | depends on PCI |
c6fd2807 JG |
168 | help |
169 | This option enables support for Promise Serial ATA TX2/TX4. | |
170 | ||
171 | If unsure, say N. | |
172 | ||
8ad92ba7 | 173 | config SATA_SX4 |
e3389cbc | 174 | tristate "Promise SATA SX4 support (Experimental)" |
81ce3c4b | 175 | depends on PCI && EXPERIMENTAL |
c6fd2807 JG |
176 | help |
177 | This option enables support for Promise Serial ATA SX4. | |
178 | ||
179 | If unsure, say N. | |
180 | ||
8ad92ba7 | 181 | config SATA_SIL |
c6fd2807 | 182 | tristate "Silicon Image SATA support" |
81ce3c4b | 183 | depends on PCI |
c6fd2807 JG |
184 | help |
185 | This option enables support for Silicon Image Serial ATA. | |
186 | ||
187 | If unsure, say N. | |
188 | ||
8ad92ba7 | 189 | config SATA_SIS |
9b14dec5 | 190 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 191 | depends on PCI |
9b14dec5 | 192 | select PATA_SIS |
c6fd2807 | 193 | help |
a617c09f | 194 | This option enables support for SiS Serial ATA on |
9b14dec5 AC |
195 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
196 | The PATA support for SiS 180 requires additionally to | |
197 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
198 | If unsure, say N. |
199 | ||
8ad92ba7 | 200 | config SATA_ULI |
c6fd2807 | 201 | tristate "ULi Electronics SATA support" |
81ce3c4b | 202 | depends on PCI |
c6fd2807 JG |
203 | help |
204 | This option enables support for ULi Electronics SATA. | |
205 | ||
206 | If unsure, say N. | |
207 | ||
8ad92ba7 | 208 | config SATA_VIA |
c6fd2807 | 209 | tristate "VIA SATA support" |
81ce3c4b | 210 | depends on PCI |
c6fd2807 JG |
211 | help |
212 | This option enables support for VIA Serial ATA. | |
213 | ||
214 | If unsure, say N. | |
215 | ||
8ad92ba7 | 216 | config SATA_VITESSE |
c6fd2807 | 217 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 218 | depends on PCI |
c6fd2807 JG |
219 | help |
220 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
221 | ||
222 | If unsure, say N. | |
223 | ||
1fd7a697 | 224 | config SATA_INIC162X |
22bfc6d5 TH |
225 | tristate "Initio 162x SATA support" |
226 | depends on PCI | |
1fd7a697 TH |
227 | help |
228 | This option enables support for Initio 162x Serial ATA. | |
229 | ||
025621f9 AC |
230 | config PATA_ACPI |
231 | tristate "ACPI firmware driver for PATA" | |
232 | depends on ATA_ACPI | |
233 | help | |
234 | This option enables an ACPI method driver which drives | |
235 | motherboard PATA controller interfaces through the ACPI | |
236 | firmware in the BIOS. This driver can sometimes handle | |
237 | otherwise unsupported hardware. | |
238 | ||
669a5db4 | 239 | config PATA_ALI |
e3389cbc AC |
240 | tristate "ALi PATA support" |
241 | depends on PCI | |
669a5db4 JG |
242 | help |
243 | This option enables support for the ALi ATA interfaces | |
244 | found on the many ALi chipsets. | |
245 | ||
246 | If unsure, say N. | |
247 | ||
248 | config PATA_AMD | |
942d0947 | 249 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
250 | depends on PCI |
251 | help | |
252 | This option enables support for the AMD and NVidia PATA | |
253 | interfaces found on the chipsets for Athlon/Athlon64. | |
254 | ||
255 | If unsure, say N. | |
256 | ||
257 | config PATA_ARTOP | |
c645fd34 AC |
258 | tristate "ARTOP 6210/6260 PATA support" |
259 | depends on PCI | |
669a5db4 JG |
260 | help |
261 | This option enables support for ARTOP PATA controllers. | |
262 | ||
263 | If unsure, say N. | |
264 | ||
d15d6e6c JJIL |
265 | config PATA_ATP867X |
266 | tristate "ARTOP/Acard ATP867X PATA support" | |
267 | depends on PCI | |
268 | help | |
269 | This option enables support for ARTOP/Acard ATP867X PATA | |
270 | controllers. | |
271 | ||
272 | If unsure, say N. | |
273 | ||
7c9ef8e4 KNG |
274 | config PATA_AT32 |
275 | tristate "Atmel AVR32 PATA support (Experimental)" | |
276 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
277 | help | |
278 | This option enables support for the IDE devices on the | |
279 | Atmel AT32AP platform. | |
280 | ||
281 | If unsure, say N. | |
282 | ||
669a5db4 | 283 | config PATA_ATIIXP |
c645fd34 AC |
284 | tristate "ATI PATA support" |
285 | depends on PCI | |
669a5db4 JG |
286 | help |
287 | This option enables support for the ATI ATA interfaces | |
288 | found on the many ATI chipsets. | |
289 | ||
290 | If unsure, say N. | |
291 | ||
b2248dac | 292 | config PATA_CMD640_PCI |
e3389cbc | 293 | tristate "CMD640 PCI PATA support (Experimental)" |
b2248dac AC |
294 | depends on PCI && EXPERIMENTAL |
295 | help | |
296 | This option enables support for the CMD640 PCI IDE | |
297 | interface chip. Only the primary channel is currently | |
298 | supported. | |
299 | ||
300 | If unsure, say N. | |
301 | ||
669a5db4 | 302 | config PATA_CMD64X |
c645fd34 AC |
303 | tristate "CMD64x PATA support" |
304 | depends on PCI | |
669a5db4 JG |
305 | help |
306 | This option enables support for the CMD64x series chips | |
307 | except for the CMD640. | |
308 | ||
309 | If unsure, say N. | |
310 | ||
311 | config PATA_CS5520 | |
312 | tristate "CS5510/5520 PATA support" | |
313 | depends on PCI | |
314 | help | |
315 | This option enables support for the Cyrix 5510/5520 | |
316 | companion chip used with the MediaGX/Geode processor family. | |
317 | ||
318 | If unsure, say N. | |
319 | ||
320 | config PATA_CS5530 | |
e3389cbc AC |
321 | tristate "CS5530 PATA support" |
322 | depends on PCI | |
669a5db4 JG |
323 | help |
324 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
325 | companion chip used with the MediaGX/Geode processor family. | |
326 | ||
327 | If unsure, say N. | |
328 | ||
329 | config PATA_CS5535 | |
330 | tristate "CS5535 PATA support (Experimental)" | |
331 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
332 | help | |
333 | This option enables support for the NatSemi/AMD CS5535 | |
334 | companion chip used with the Geode processor family. | |
335 | ||
336 | If unsure, say N. | |
337 | ||
3957df61 | 338 | config PATA_CS5536 |
e3389cbc AC |
339 | tristate "CS5536 PATA support" |
340 | depends on PCI && X86 && !X86_64 | |
3957df61 MP |
341 | help |
342 | This option enables support for the AMD CS5536 | |
343 | companion chip used with the Geode LX processor family. | |
344 | ||
345 | If unsure, say N. | |
346 | ||
669a5db4 JG |
347 | config PATA_CYPRESS |
348 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
349 | depends on PCI && EXPERIMENTAL | |
350 | help | |
351 | This option enables support for the Cypress/Contaq CY82C693 | |
352 | chipset found in some Alpha systems | |
353 | ||
354 | If unsure, say N. | |
355 | ||
356 | config PATA_EFAR | |
357 | tristate "EFAR SLC90E66 support" | |
358 | depends on PCI | |
359 | help | |
360 | This option enables support for the EFAR SLC90E66 | |
361 | IDE controller found on some older machines. | |
362 | ||
363 | If unsure, say N. | |
364 | ||
365 | config ATA_GENERIC | |
366 | tristate "Generic ATA support" | |
367 | depends on PCI | |
368 | help | |
369 | This option enables support for generic BIOS configured | |
370 | ATA controllers via the new ATA layer | |
371 | ||
372 | If unsure, say N. | |
373 | ||
374 | config PATA_HPT366 | |
c645fd34 AC |
375 | tristate "HPT 366/368 PATA support" |
376 | depends on PCI | |
669a5db4 JG |
377 | help |
378 | This option enables support for the HPT 366 and 368 | |
379 | PATA controllers via the new ATA layer. | |
380 | ||
381 | If unsure, say N. | |
382 | ||
383 | config PATA_HPT37X | |
be315d46 AC |
384 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
385 | depends on PCI | |
669a5db4 JG |
386 | help |
387 | This option enables support for the majority of the later HPT | |
388 | PATA controllers via the new ATA layer. | |
389 | ||
390 | If unsure, say N. | |
391 | ||
392 | config PATA_HPT3X2N | |
be315d46 AC |
393 | tristate "HPT 372N/302N PATA support" |
394 | depends on PCI | |
669a5db4 JG |
395 | help |
396 | This option enables support for the N variant HPT PATA | |
397 | controllers via the new ATA layer | |
398 | ||
399 | If unsure, say N. | |
400 | ||
401 | config PATA_HPT3X3 | |
66e7da4e | 402 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
403 | depends on PCI |
404 | help | |
405 | This option enables support for the HPT 343/363 | |
406 | PATA controllers via the new ATA layer | |
407 | ||
408 | If unsure, say N. | |
409 | ||
66e7da4e | 410 | config PATA_HPT3X3_DMA |
be315d46 | 411 | bool "HPT 343/363 DMA support" |
66e7da4e AC |
412 | depends on PATA_HPT3X3 |
413 | help | |
414 | This option enables DMA support for the HPT343/363 | |
415 | controllers. Enable with care as there are still some | |
416 | problems with DMA on this chipset. | |
417 | ||
669a5db4 | 418 | config PATA_ISAPNP |
e3389cbc AC |
419 | tristate "ISA Plug and Play PATA support" |
420 | depends on ISAPNP | |
669a5db4 JG |
421 | help |
422 | This option enables support for ISA plug & play ATA | |
423 | controllers such as those found on old soundcards. | |
424 | ||
425 | If unsure, say N. | |
426 | ||
669a5db4 | 427 | config PATA_IT821X |
942d0947 AC |
428 | tristate "IT8211/2 PATA support" |
429 | depends on PCI | |
669a5db4 JG |
430 | help |
431 | This option enables support for the ITE 8211 and 8212 | |
432 | PATA controllers via the new ATA layer, including RAID | |
433 | mode. | |
434 | ||
435 | If unsure, say N. | |
436 | ||
9b13b682 AC |
437 | config PATA_IT8213 |
438 | tristate "IT8213 PATA support (Experimental)" | |
439 | depends on PCI && EXPERIMENTAL | |
440 | help | |
441 | This option enables support for the ITE 821 PATA | |
442 | controllers via the new ATA layer. | |
443 | ||
444 | If unsure, say N. | |
445 | ||
406176ee JG |
446 | config PATA_JMICRON |
447 | tristate "JMicron PATA support" | |
448 | depends on PCI | |
449 | help | |
450 | Enable support for the JMicron IDE controller, via the new | |
451 | ATA layer. | |
452 | ||
453 | If unsure, say N. | |
454 | ||
669a5db4 JG |
455 | config PATA_LEGACY |
456 | tristate "Legacy ISA PATA support (Experimental)" | |
96780078 | 457 | depends on (ISA || PCI) && EXPERIMENTAL |
669a5db4 | 458 | help |
96780078 | 459 | This option enables support for ISA/VLB/PCI bus legacy PATA |
669a5db4 JG |
460 | ports and allows them to be accessed via the new ATA layer. |
461 | ||
462 | If unsure, say N. | |
463 | ||
464 | config PATA_TRIFLEX | |
465 | tristate "Compaq Triflex PATA support" | |
466 | depends on PCI | |
467 | help | |
468 | Enable support for the Compaq 'Triflex' IDE controller as found | |
469 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
470 | ||
471 | If unsure, say N. | |
472 | ||
75742cb4 AC |
473 | config PATA_MARVELL |
474 | tristate "Marvell PATA support via legacy mode" | |
475 | depends on PCI | |
476 | help | |
5b66c829 AC |
477 | This option enables limited support for the Marvell 88SE61xx ATA |
478 | controllers. If you wish to use only the SATA ports then select | |
479 | the AHCI driver alone. If you wish to the use the PATA port or | |
480 | both SATA and PATA include this driver. | |
75742cb4 AC |
481 | |
482 | If unsure, say N. | |
483 | ||
155d2916 SM |
484 | config PATA_MPC52xx |
485 | tristate "Freescale MPC52xx SoC internal IDE" | |
6b61e69e TY |
486 | depends on PPC_MPC52xx && PPC_BESTCOMM |
487 | select PPC_BESTCOMM_ATA | |
155d2916 SM |
488 | help |
489 | This option enables support for integrated IDE controller | |
490 | of the Freescale MPC52xx SoC. | |
491 | ||
492 | If unsure, say N. | |
493 | ||
669a5db4 JG |
494 | config PATA_MPIIX |
495 | tristate "Intel PATA MPIIX support" | |
496 | depends on PCI | |
497 | help | |
498 | This option enables support for MPIIX PATA support. | |
499 | ||
500 | If unsure, say N. | |
501 | ||
502 | config PATA_OLDPIIX | |
942d0947 AC |
503 | tristate "Intel PATA old PIIX support" |
504 | depends on PCI | |
669a5db4 | 505 | help |
942d0947 | 506 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
507 | |
508 | If unsure, say N. | |
509 | ||
510 | config PATA_NETCELL | |
511 | tristate "NETCELL Revolution RAID support" | |
512 | depends on PCI | |
513 | help | |
514 | This option enables support for the Netcell Revolution RAID | |
515 | PATA controller. | |
516 | ||
517 | If unsure, say N. | |
518 | ||
51dbd490 | 519 | config PATA_NINJA32 |
be315d46 AC |
520 | tristate "Ninja32/Delkin Cardbus ATA support" |
521 | depends on PCI | |
51dbd490 AC |
522 | help |
523 | This option enables support for the Ninja32, Delkin and | |
524 | possibly other brands of Cardbus ATA adapter | |
525 | ||
526 | If unsure, say N. | |
527 | ||
669a5db4 | 528 | config PATA_NS87410 |
e3389cbc AC |
529 | tristate "Nat Semi NS87410 PATA support" |
530 | depends on PCI | |
669a5db4 JG |
531 | help |
532 | This option enables support for the National Semiconductor | |
533 | NS87410 PCI-IDE controller. | |
534 | ||
535 | If unsure, say N. | |
536 | ||
c4b5b7b6 | 537 | config PATA_NS87415 |
e3389cbc AC |
538 | tristate "Nat Semi NS87415 PATA support" |
539 | depends on PCI | |
c4b5b7b6 AC |
540 | help |
541 | This option enables support for the National Semiconductor | |
542 | NS87415 PCI-IDE controller. | |
543 | ||
544 | If unsure, say N. | |
545 | ||
669a5db4 JG |
546 | config PATA_OPTI |
547 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
548 | depends on PCI && EXPERIMENTAL | |
549 | help | |
550 | This option enables full PIO support for the early Opti ATA | |
551 | controllers found on some old motherboards. | |
552 | ||
553 | If unsure, say N. | |
554 | ||
555 | config PATA_OPTIDMA | |
516e72cb | 556 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
557 | depends on PCI && EXPERIMENTAL |
558 | help | |
559 | This option enables DMA/PIO support for the later OPTi | |
560 | controllers found on some old motherboards and in some | |
3dde6ad8 | 561 | laptops. |
669a5db4 JG |
562 | |
563 | If unsure, say N. | |
564 | ||
5a9d2515 MV |
565 | config PATA_PALMLD |
566 | tristate "Palm LifeDrive PATA support" | |
567 | depends on MACH_PALMLD | |
568 | help | |
569 | This option enables support for Palm LifeDrive's internal ATA | |
570 | port via the new ATA layer. | |
571 | ||
572 | If unsure, say N. | |
573 | ||
669a5db4 JG |
574 | config PATA_PCMCIA |
575 | tristate "PCMCIA PATA support" | |
576 | depends on PCMCIA | |
577 | help | |
578 | This option enables support for PCMCIA ATA interfaces, including | |
579 | compact flash card adapters via the new ATA layer. | |
580 | ||
581 | If unsure, say N. | |
582 | ||
be315d46 AC |
583 | config PATA_PDC2027X |
584 | tristate "Promise PATA 2027x support" | |
585 | depends on PCI | |
586 | help | |
587 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
588 | ||
589 | If unsure, say N. | |
590 | ||
669a5db4 | 591 | config PATA_PDC_OLD |
e3389cbc AC |
592 | tristate "Older Promise PATA controller support" |
593 | depends on PCI | |
669a5db4 JG |
594 | help |
595 | This option enables support for the Promise 20246, 20262, 20263, | |
596 | 20265 and 20267 adapters. | |
597 | ||
598 | If unsure, say N. | |
599 | ||
600 | config PATA_QDI | |
601 | tristate "QDI VLB PATA support" | |
4735ebed | 602 | depends on ISA |
669a5db4 JG |
603 | help |
604 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
605 | ||
606 | config PATA_RADISYS | |
e3389cbc | 607 | tristate "RADISYS 82600 PATA support (Experimental)" |
669a5db4 JG |
608 | depends on PCI && EXPERIMENTAL |
609 | help | |
610 | This option enables support for the RADISYS 82600 | |
611 | PATA controllers via the new ATA layer | |
612 | ||
613 | If unsure, say N. | |
614 | ||
3dd654bf RB |
615 | config PATA_RB532 |
616 | tristate "RouterBoard 532 PATA CompactFlash support" | |
617 | depends on MIKROTIK_RB532 | |
3db691da | 618 | help |
3dd654bf | 619 | This option enables support for the RouterBoard 532 |
3db691da FF |
620 | PATA CompactFlash controller. |
621 | ||
622 | If unsure, say N. | |
623 | ||
6b406782 AC |
624 | config PATA_RDC |
625 | tristate "RDC PATA support" | |
626 | depends on PCI | |
627 | help | |
628 | This option enables basic support for the later RDC PATA controllers | |
629 | controllers via the new ATA layer. For the RDC 1010, you need to | |
630 | enable the IT821X driver instead. | |
631 | ||
632 | If unsure, say N. | |
633 | ||
669a5db4 JG |
634 | config PATA_RZ1000 |
635 | tristate "PC Tech RZ1000 PATA support" | |
636 | depends on PCI | |
637 | help | |
638 | This option enables basic support for the PC Tech RZ1000/1 | |
639 | PATA controllers via the new ATA layer | |
640 | ||
641 | If unsure, say N. | |
642 | ||
643 | config PATA_SC1200 | |
e3389cbc AC |
644 | tristate "SC1200 PATA support" |
645 | depends on PCI | |
669a5db4 JG |
646 | help |
647 | This option enables support for the NatSemi/AMD SC1200 SoC | |
648 | companion chip used with the Geode processor family. | |
649 | ||
650 | If unsure, say N. | |
651 | ||
652 | config PATA_SERVERWORKS | |
942d0947 AC |
653 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
654 | depends on PCI | |
669a5db4 JG |
655 | help |
656 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
657 | HT1000 PATA controllers, via the new ATA layer. | |
658 | ||
659 | If unsure, say N. | |
660 | ||
669a5db4 JG |
661 | config PATA_SIL680 |
662 | tristate "CMD / Silicon Image 680 PATA support" | |
663 | depends on PCI | |
664 | help | |
665 | This option enables support for CMD / Silicon Image 680 PATA. | |
666 | ||
667 | If unsure, say N. | |
668 | ||
669 | config PATA_SIS | |
e3389cbc AC |
670 | tristate "SiS PATA support" |
671 | depends on PCI | |
669a5db4 JG |
672 | help |
673 | This option enables support for SiS PATA controllers | |
674 | ||
675 | If unsure, say N. | |
676 | ||
8e182a90 AC |
677 | config PATA_TOSHIBA |
678 | tristate "Toshiba Piccolo support (Experimental)" | |
679 | depends on PCI && EXPERIMENTAL | |
680 | help | |
681 | Support for the Toshiba Piccolo controllers. Currently only the | |
682 | primary channel is supported by this driver. | |
683 | ||
684 | If unsure, say N. | |
685 | ||
669a5db4 JG |
686 | config PATA_VIA |
687 | tristate "VIA PATA support" | |
688 | depends on PCI | |
689 | help | |
690 | This option enables support for the VIA PATA interfaces | |
691 | found on the many VIA chipsets. | |
692 | ||
693 | If unsure, say N. | |
694 | ||
695 | config PATA_WINBOND | |
696 | tristate "Winbond SL82C105 PATA support" | |
697 | depends on PCI | |
698 | help | |
699 | This option enables support for SL82C105 PATA devices found in the | |
700 | Netwinder and some other systems | |
701 | ||
702 | If unsure, say N. | |
703 | ||
7e45b0e5 AC |
704 | config PATA_WINBOND_VLB |
705 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
706 | depends on ISA && EXPERIMENTAL | |
707 | help | |
708 | Support for the Winbond W83759A controller on Vesa Local Bus | |
709 | systems. | |
710 | ||
cc18e0fe BD |
711 | config HAVE_PATA_PLATFORM |
712 | bool | |
713 | help | |
714 | This is an internal configuration node for any machine that | |
715 | uses pata-platform driver to enable the relevant driver in the | |
716 | configuration structure without having to submit endless patches | |
717 | to update the PATA_PLATFORM entry. | |
718 | ||
a20c9e82 PM |
719 | config PATA_PLATFORM |
720 | tristate "Generic platform device PATA support" | |
2ad69677 | 721 | depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
722 | help |
723 | This option enables support for generic directly connected ATA | |
724 | devices commonly found on embedded systems. | |
725 | ||
726 | If unsure, say N. | |
61f71621 | 727 | |
918d7b7c SM |
728 | config PATA_AT91 |
729 | tristate "PATA support for AT91SAM9260" | |
730 | depends on ARM && ARCH_AT91 | |
731 | help | |
732 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
733 | ||
734 | If unsure, say N. | |
735 | ||
61f71621 AV |
736 | config PATA_OF_PLATFORM |
737 | tristate "OpenFirmware platform device PATA support" | |
738 | depends on PATA_PLATFORM && PPC_OF | |
739 | help | |
740 | This option enables support for generic directly connected ATA | |
741 | devices commonly found on embedded systems with OpenFirmware | |
742 | bindings. | |
743 | ||
744 | If unsure, say N. | |
a20c9e82 | 745 | |
73b6a2be RK |
746 | config PATA_ICSIDE |
747 | tristate "Acorn ICS PATA support" | |
748 | depends on ARM && ARCH_ACORN | |
749 | help | |
750 | On Acorn systems, say Y here if you wish to use the ICS PATA | |
751 | interface card. This is not required for ICS partition support. | |
752 | If you are unsure, say N to this. | |
753 | ||
0df0d0a0 AZ |
754 | config PATA_IXP4XX_CF |
755 | tristate "IXP4XX Compact Flash support" | |
756 | depends on ARCH_IXP4XX | |
757 | help | |
758 | This option enables support for a Compact Flash connected on | |
759 | the ixp4xx expansion bus. This driver had been written for | |
760 | Loft/Avila boards in mind but can work with others. | |
761 | ||
762 | If unsure, say N. | |
763 | ||
3c929c6f DD |
764 | config PATA_OCTEON_CF |
765 | tristate "OCTEON Boot Bus Compact Flash support" | |
766 | depends on CPU_CAVIUM_OCTEON | |
767 | help | |
768 | This option enables a polled compact flash driver for use with | |
769 | compact flash cards attached to the OCTEON boot bus. | |
770 | ||
771 | If unsure, say N. | |
772 | ||
a619f981 AI |
773 | config PATA_SCC |
774 | tristate "Toshiba's Cell Reference Set IDE support" | |
aeb9362a | 775 | depends on PCI && PPC_CELLEB |
a619f981 AI |
776 | help |
777 | This option enables support for the built-in IDE controller on | |
778 | Toshiba Cell Reference Board. | |
779 | ||
780 | If unsure, say N. | |
781 | ||
07ab85de AD |
782 | config PATA_SCH |
783 | tristate "Intel SCH PATA support" | |
784 | depends on PCI | |
785 | help | |
786 | This option enables support for Intel SCH PATA on the Intel | |
787 | SCH (US15W, US15L, UL11L) series host controllers. | |
788 | ||
789 | If unsure, say N. | |
790 | ||
d830d173 SZ |
791 | config PATA_BF54X |
792 | tristate "Blackfin 54x ATAPI support" | |
793 | depends on BF542 || BF548 || BF549 | |
794 | help | |
795 | This option enables support for the built-in ATAPI controller on | |
796 | Blackfin 54x family chips. | |
797 | ||
798 | If unsure, say N. | |
799 | ||
88358ab0 BH |
800 | config PATA_MACIO |
801 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
802 | depends on PPC_PMAC | |
803 | help | |
804 | Most IDE capable PowerMacs have IDE busses driven by a variant | |
805 | of this controller which is part of the Apple chipset used on | |
806 | most PowerMac models. Some models have multiple busses using | |
807 | different chipsets, though generally, MacIO is one of them. | |
808 | ||
809 | ||
127102ae | 810 | endif # ATA_SFF |
b196fc69 | 811 | endif # ATA |