]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*****************************************************************************/ |
2 | ||
3 | /* | |
4 | * stallion.c -- stallion multiport serial driver. | |
5 | * | |
6 | * Copyright (C) 1996-1999 Stallion Technologies | |
7 | * Copyright (C) 1994-1996 Greg Ungerer. | |
8 | * | |
9 | * This code is loosely based on the Linux serial driver, written by | |
10 | * Linus Torvalds, Theodore T'so and others. | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2 of the License, or | |
15 | * (at your option) any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; if not, write to the Free Software | |
24 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | */ | |
26 | ||
27 | /*****************************************************************************/ | |
28 | ||
1da177e4 | 29 | #include <linux/module.h> |
d43c36dc | 30 | #include <linux/sched.h> |
1da177e4 LT |
31 | #include <linux/slab.h> |
32 | #include <linux/interrupt.h> | |
33 | #include <linux/tty.h> | |
34 | #include <linux/tty_flip.h> | |
35 | #include <linux/serial.h> | |
8561c44c | 36 | #include <linux/seq_file.h> |
1da177e4 LT |
37 | #include <linux/cd1400.h> |
38 | #include <linux/sc26198.h> | |
39 | #include <linux/comstats.h> | |
40 | #include <linux/stallion.h> | |
41 | #include <linux/ioport.h> | |
42 | #include <linux/init.h> | |
1da177e4 LT |
43 | #include <linux/device.h> |
44 | #include <linux/delay.h> | |
843b568c | 45 | #include <linux/ctype.h> |
1da177e4 LT |
46 | |
47 | #include <asm/io.h> | |
48 | #include <asm/uaccess.h> | |
49 | ||
1da177e4 | 50 | #include <linux/pci.h> |
1da177e4 LT |
51 | |
52 | /*****************************************************************************/ | |
53 | ||
54 | /* | |
55 | * Define different board types. Use the standard Stallion "assigned" | |
56 | * board numbers. Boards supported in this driver are abbreviated as | |
57 | * EIO = EasyIO and ECH = EasyConnection 8/32. | |
58 | */ | |
59 | #define BRD_EASYIO 20 | |
60 | #define BRD_ECH 21 | |
61 | #define BRD_ECHMC 22 | |
62 | #define BRD_ECHPCI 26 | |
63 | #define BRD_ECH64PCI 27 | |
64 | #define BRD_EASYIOPCI 28 | |
65 | ||
843b568c | 66 | struct stlconf { |
6b2c9457 | 67 | unsigned int brdtype; |
1da177e4 LT |
68 | int ioaddr1; |
69 | int ioaddr2; | |
70 | unsigned long memaddr; | |
71 | int irq; | |
72 | int irqtype; | |
1da177e4 LT |
73 | }; |
74 | ||
843b568c | 75 | static unsigned int stl_nrbrds; |
1da177e4 LT |
76 | |
77 | /*****************************************************************************/ | |
78 | ||
79 | /* | |
80 | * Define some important driver characteristics. Device major numbers | |
81 | * allocated as per Linux Device Registry. | |
82 | */ | |
83 | #ifndef STL_SIOMEMMAJOR | |
84 | #define STL_SIOMEMMAJOR 28 | |
85 | #endif | |
86 | #ifndef STL_SERIALMAJOR | |
87 | #define STL_SERIALMAJOR 24 | |
88 | #endif | |
89 | #ifndef STL_CALLOUTMAJOR | |
90 | #define STL_CALLOUTMAJOR 25 | |
91 | #endif | |
92 | ||
93 | /* | |
94 | * Set the TX buffer size. Bigger is better, but we don't want | |
95 | * to chew too much memory with buffers! | |
96 | */ | |
97 | #define STL_TXBUFLOW 512 | |
98 | #define STL_TXBUFSIZE 4096 | |
99 | ||
100 | /*****************************************************************************/ | |
101 | ||
102 | /* | |
103 | * Define our local driver identity first. Set up stuff to deal with | |
104 | * all the local structures required by a serial tty driver. | |
105 | */ | |
106 | static char *stl_drvtitle = "Stallion Multiport Serial Driver"; | |
107 | static char *stl_drvname = "stallion"; | |
108 | static char *stl_drvversion = "5.6.0"; | |
109 | ||
110 | static struct tty_driver *stl_serial; | |
111 | ||
1da177e4 LT |
112 | /* |
113 | * Define a local default termios struct. All ports will be created | |
114 | * with this termios initially. Basically all it defines is a raw port | |
115 | * at 9600, 8 data bits, 1 stop bit. | |
116 | */ | |
606d099c | 117 | static struct ktermios stl_deftermios = { |
1da177e4 LT |
118 | .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), |
119 | .c_cc = INIT_C_CC, | |
606d099c AC |
120 | .c_ispeed = 9600, |
121 | .c_ospeed = 9600, | |
1da177e4 LT |
122 | }; |
123 | ||
1da177e4 LT |
124 | /* |
125 | * Define global place to put buffer overflow characters. | |
126 | */ | |
127 | static char stl_unwanted[SC26198_RXFIFOSIZE]; | |
128 | ||
129 | /*****************************************************************************/ | |
130 | ||
79cfe7ab | 131 | static DEFINE_MUTEX(stl_brdslock); |
ca7ed0f2 | 132 | static struct stlbrd *stl_brds[STL_MAXBRDS]; |
1da177e4 | 133 | |
31f35939 AC |
134 | static const struct tty_port_operations stl_port_ops; |
135 | ||
1da177e4 LT |
136 | /* |
137 | * Per board state flags. Used with the state field of the board struct. | |
138 | * Not really much here! | |
139 | */ | |
140 | #define BRD_FOUND 0x1 | |
fc06b5cf JS |
141 | #define STL_PROBED 0x2 |
142 | ||
1da177e4 LT |
143 | |
144 | /* | |
145 | * Define the port structure istate flags. These set of flags are | |
146 | * modified at interrupt time - so setting and reseting them needs | |
147 | * to be atomic. Use the bit clear/setting routines for this. | |
148 | */ | |
149 | #define ASYI_TXBUSY 1 | |
150 | #define ASYI_TXLOW 2 | |
ccfea3c9 | 151 | #define ASYI_TXFLOWED 3 |
1da177e4 LT |
152 | |
153 | /* | |
154 | * Define an array of board names as printable strings. Handy for | |
155 | * referencing boards when printing trace and stuff. | |
156 | */ | |
157 | static char *stl_brdnames[] = { | |
615e4a71 JS |
158 | NULL, |
159 | NULL, | |
160 | NULL, | |
161 | NULL, | |
162 | NULL, | |
163 | NULL, | |
164 | NULL, | |
165 | NULL, | |
166 | NULL, | |
167 | NULL, | |
168 | NULL, | |
169 | NULL, | |
170 | NULL, | |
171 | NULL, | |
172 | NULL, | |
173 | NULL, | |
174 | NULL, | |
175 | NULL, | |
176 | NULL, | |
177 | NULL, | |
1da177e4 LT |
178 | "EasyIO", |
179 | "EC8/32-AT", | |
180 | "EC8/32-MC", | |
615e4a71 JS |
181 | NULL, |
182 | NULL, | |
183 | NULL, | |
1da177e4 LT |
184 | "EC8/32-PCI", |
185 | "EC8/64-PCI", | |
186 | "EasyIO-PCI", | |
187 | }; | |
188 | ||
189 | /*****************************************************************************/ | |
190 | ||
191 | /* | |
192 | * Define some string labels for arguments passed from the module | |
193 | * load line. These allow for easy board definitions, and easy | |
194 | * modification of the io, memory and irq resoucres. | |
195 | */ | |
6b2c9457 | 196 | static unsigned int stl_nargs; |
1da177e4 LT |
197 | static char *board0[4]; |
198 | static char *board1[4]; | |
199 | static char *board2[4]; | |
200 | static char *board3[4]; | |
201 | ||
202 | static char **stl_brdsp[] = { | |
203 | (char **) &board0, | |
204 | (char **) &board1, | |
205 | (char **) &board2, | |
206 | (char **) &board3 | |
207 | }; | |
208 | ||
209 | /* | |
210 | * Define a set of common board names, and types. This is used to | |
211 | * parse any module arguments. | |
212 | */ | |
213 | ||
ca7ed0f2 | 214 | static struct { |
1da177e4 LT |
215 | char *name; |
216 | int type; | |
ca7ed0f2 | 217 | } stl_brdstr[] = { |
1da177e4 LT |
218 | { "easyio", BRD_EASYIO }, |
219 | { "eio", BRD_EASYIO }, | |
220 | { "20", BRD_EASYIO }, | |
221 | { "ec8/32", BRD_ECH }, | |
222 | { "ec8/32-at", BRD_ECH }, | |
223 | { "ec8/32-isa", BRD_ECH }, | |
224 | { "ech", BRD_ECH }, | |
225 | { "echat", BRD_ECH }, | |
226 | { "21", BRD_ECH }, | |
227 | { "ec8/32-mc", BRD_ECHMC }, | |
228 | { "ec8/32-mca", BRD_ECHMC }, | |
229 | { "echmc", BRD_ECHMC }, | |
230 | { "echmca", BRD_ECHMC }, | |
231 | { "22", BRD_ECHMC }, | |
232 | { "ec8/32-pc", BRD_ECHPCI }, | |
233 | { "ec8/32-pci", BRD_ECHPCI }, | |
234 | { "26", BRD_ECHPCI }, | |
235 | { "ec8/64-pc", BRD_ECH64PCI }, | |
236 | { "ec8/64-pci", BRD_ECH64PCI }, | |
237 | { "ech-pci", BRD_ECH64PCI }, | |
238 | { "echpci", BRD_ECH64PCI }, | |
239 | { "echpc", BRD_ECH64PCI }, | |
240 | { "27", BRD_ECH64PCI }, | |
241 | { "easyio-pc", BRD_EASYIOPCI }, | |
242 | { "easyio-pci", BRD_EASYIOPCI }, | |
243 | { "eio-pci", BRD_EASYIOPCI }, | |
244 | { "eiopci", BRD_EASYIOPCI }, | |
245 | { "28", BRD_EASYIOPCI }, | |
246 | }; | |
247 | ||
248 | /* | |
249 | * Define the module agruments. | |
250 | */ | |
1da177e4 LT |
251 | |
252 | module_param_array(board0, charp, &stl_nargs, 0); | |
253 | MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
254 | module_param_array(board1, charp, &stl_nargs, 0); | |
255 | MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
256 | module_param_array(board2, charp, &stl_nargs, 0); | |
257 | MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
258 | module_param_array(board3, charp, &stl_nargs, 0); | |
259 | MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
260 | ||
261 | /*****************************************************************************/ | |
262 | ||
263 | /* | |
264 | * Hardware ID bits for the EasyIO and ECH boards. These defines apply | |
265 | * to the directly accessible io ports of these boards (not the uarts - | |
266 | * they are in cd1400.h and sc26198.h). | |
267 | */ | |
268 | #define EIO_8PORTRS 0x04 | |
269 | #define EIO_4PORTRS 0x05 | |
270 | #define EIO_8PORTDI 0x00 | |
271 | #define EIO_8PORTM 0x06 | |
272 | #define EIO_MK3 0x03 | |
273 | #define EIO_IDBITMASK 0x07 | |
274 | ||
275 | #define EIO_BRDMASK 0xf0 | |
276 | #define ID_BRD4 0x10 | |
277 | #define ID_BRD8 0x20 | |
278 | #define ID_BRD16 0x30 | |
279 | ||
280 | #define EIO_INTRPEND 0x08 | |
281 | #define EIO_INTEDGE 0x00 | |
282 | #define EIO_INTLEVEL 0x08 | |
283 | #define EIO_0WS 0x10 | |
284 | ||
285 | #define ECH_ID 0xa0 | |
286 | #define ECH_IDBITMASK 0xe0 | |
287 | #define ECH_BRDENABLE 0x08 | |
288 | #define ECH_BRDDISABLE 0x00 | |
289 | #define ECH_INTENABLE 0x01 | |
290 | #define ECH_INTDISABLE 0x00 | |
291 | #define ECH_INTLEVEL 0x02 | |
292 | #define ECH_INTEDGE 0x00 | |
293 | #define ECH_INTRPEND 0x01 | |
294 | #define ECH_BRDRESET 0x01 | |
295 | ||
296 | #define ECHMC_INTENABLE 0x01 | |
297 | #define ECHMC_BRDRESET 0x02 | |
298 | ||
299 | #define ECH_PNLSTATUS 2 | |
300 | #define ECH_PNL16PORT 0x20 | |
301 | #define ECH_PNLIDMASK 0x07 | |
302 | #define ECH_PNLXPID 0x40 | |
303 | #define ECH_PNLINTRPEND 0x80 | |
304 | ||
305 | #define ECH_ADDR2MASK 0x1e0 | |
306 | ||
307 | /* | |
308 | * Define the vector mapping bits for the programmable interrupt board | |
309 | * hardware. These bits encode the interrupt for the board to use - it | |
310 | * is software selectable (except the EIO-8M). | |
311 | */ | |
312 | static unsigned char stl_vecmap[] = { | |
313 | 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07, | |
314 | 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03 | |
315 | }; | |
316 | ||
b65b5b59 AC |
317 | /* |
318 | * Lock ordering is that you may not take stallion_lock holding | |
319 | * brd_lock. | |
320 | */ | |
321 | ||
322 | static spinlock_t brd_lock; /* Guard the board mapping */ | |
323 | static spinlock_t stallion_lock; /* Guard the tty driver */ | |
324 | ||
1da177e4 LT |
325 | /* |
326 | * Set up enable and disable macros for the ECH boards. They require | |
327 | * the secondary io address space to be activated and deactivated. | |
328 | * This way all ECH boards can share their secondary io region. | |
329 | * If this is an ECH-PCI board then also need to set the page pointer | |
330 | * to point to the correct page. | |
331 | */ | |
332 | #define BRDENABLE(brdnr,pagenr) \ | |
333 | if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ | |
334 | outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \ | |
335 | stl_brds[(brdnr)]->ioctrl); \ | |
336 | else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \ | |
337 | outb((pagenr), stl_brds[(brdnr)]->ioctrl); | |
338 | ||
339 | #define BRDDISABLE(brdnr) \ | |
340 | if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ | |
341 | outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \ | |
342 | stl_brds[(brdnr)]->ioctrl); | |
343 | ||
344 | #define STL_CD1400MAXBAUD 230400 | |
345 | #define STL_SC26198MAXBAUD 460800 | |
346 | ||
347 | #define STL_BAUDBASE 115200 | |
348 | #define STL_CLOSEDELAY (5 * HZ / 10) | |
349 | ||
350 | /*****************************************************************************/ | |
351 | ||
1da177e4 LT |
352 | /* |
353 | * Define the Stallion PCI vendor and device IDs. | |
354 | */ | |
355 | #ifndef PCI_VENDOR_ID_STALLION | |
356 | #define PCI_VENDOR_ID_STALLION 0x124d | |
357 | #endif | |
358 | #ifndef PCI_DEVICE_ID_ECHPCI832 | |
359 | #define PCI_DEVICE_ID_ECHPCI832 0x0000 | |
360 | #endif | |
361 | #ifndef PCI_DEVICE_ID_ECHPCI864 | |
362 | #define PCI_DEVICE_ID_ECHPCI864 0x0002 | |
363 | #endif | |
364 | #ifndef PCI_DEVICE_ID_EIOPCI | |
365 | #define PCI_DEVICE_ID_EIOPCI 0x0003 | |
366 | #endif | |
367 | ||
368 | /* | |
369 | * Define structure to hold all Stallion PCI boards. | |
370 | */ | |
1da177e4 | 371 | |
b1b84fe0 JS |
372 | static struct pci_device_id stl_pcibrds[] = { |
373 | { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864), | |
374 | .driver_data = BRD_ECH64PCI }, | |
375 | { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI), | |
376 | .driver_data = BRD_EASYIOPCI }, | |
377 | { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832), | |
378 | .driver_data = BRD_ECHPCI }, | |
379 | { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), | |
380 | .driver_data = BRD_ECHPCI }, | |
381 | { } | |
382 | }; | |
383 | MODULE_DEVICE_TABLE(pci, stl_pcibrds); | |
1da177e4 LT |
384 | |
385 | /*****************************************************************************/ | |
386 | ||
387 | /* | |
388 | * Define macros to extract a brd/port number from a minor number. | |
389 | */ | |
390 | #define MINOR2BRD(min) (((min) & 0xc0) >> 6) | |
391 | #define MINOR2PORT(min) ((min) & 0x3f) | |
392 | ||
393 | /* | |
394 | * Define a baud rate table that converts termios baud rate selector | |
395 | * into the actual baud rate value. All baud rate calculations are | |
396 | * based on the actual baud rate required. | |
397 | */ | |
398 | static unsigned int stl_baudrates[] = { | |
399 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, | |
400 | 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 | |
401 | }; | |
402 | ||
1da177e4 LT |
403 | /*****************************************************************************/ |
404 | ||
405 | /* | |
406 | * Declare all those functions in this driver! | |
407 | */ | |
408 | ||
894cb917 | 409 | static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); |
ca7ed0f2 | 410 | static int stl_brdinit(struct stlbrd *brdp); |
d18a750f | 411 | static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); |
ca7ed0f2 | 412 | static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); |
1da177e4 | 413 | |
1da177e4 LT |
414 | /* |
415 | * CD1400 uart specific handling functions. | |
416 | */ | |
ca7ed0f2 JS |
417 | static void stl_cd1400setreg(struct stlport *portp, int regnr, int value); |
418 | static int stl_cd1400getreg(struct stlport *portp, int regnr); | |
419 | static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value); | |
420 | static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp); | |
421 | static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); | |
606d099c | 422 | static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp); |
ca7ed0f2 JS |
423 | static int stl_cd1400getsignals(struct stlport *portp); |
424 | static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts); | |
425 | static void stl_cd1400ccrwait(struct stlport *portp); | |
426 | static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx); | |
427 | static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx); | |
428 | static void stl_cd1400disableintrs(struct stlport *portp); | |
429 | static void stl_cd1400sendbreak(struct stlport *portp, int len); | |
430 | static void stl_cd1400flowctrl(struct stlport *portp, int state); | |
431 | static void stl_cd1400sendflow(struct stlport *portp, int state); | |
432 | static void stl_cd1400flush(struct stlport *portp); | |
433 | static int stl_cd1400datastate(struct stlport *portp); | |
434 | static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase); | |
435 | static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase); | |
436 | static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr); | |
437 | static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr); | |
438 | static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr); | |
439 | ||
440 | static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr); | |
1da177e4 LT |
441 | |
442 | /* | |
443 | * SC26198 uart specific handling functions. | |
444 | */ | |
ca7ed0f2 JS |
445 | static void stl_sc26198setreg(struct stlport *portp, int regnr, int value); |
446 | static int stl_sc26198getreg(struct stlport *portp, int regnr); | |
447 | static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value); | |
448 | static int stl_sc26198getglobreg(struct stlport *portp, int regnr); | |
449 | static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp); | |
450 | static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); | |
606d099c | 451 | static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp); |
ca7ed0f2 JS |
452 | static int stl_sc26198getsignals(struct stlport *portp); |
453 | static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts); | |
454 | static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx); | |
455 | static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx); | |
456 | static void stl_sc26198disableintrs(struct stlport *portp); | |
457 | static void stl_sc26198sendbreak(struct stlport *portp, int len); | |
458 | static void stl_sc26198flowctrl(struct stlport *portp, int state); | |
459 | static void stl_sc26198sendflow(struct stlport *portp, int state); | |
460 | static void stl_sc26198flush(struct stlport *portp); | |
461 | static int stl_sc26198datastate(struct stlport *portp); | |
462 | static void stl_sc26198wait(struct stlport *portp); | |
463 | static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty); | |
464 | static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase); | |
465 | static void stl_sc26198txisr(struct stlport *port); | |
466 | static void stl_sc26198rxisr(struct stlport *port, unsigned int iack); | |
467 | static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch); | |
468 | static void stl_sc26198rxbadchars(struct stlport *portp); | |
469 | static void stl_sc26198otherisr(struct stlport *port, unsigned int iack); | |
1da177e4 LT |
470 | |
471 | /*****************************************************************************/ | |
472 | ||
473 | /* | |
474 | * Generic UART support structure. | |
475 | */ | |
476 | typedef struct uart { | |
ca7ed0f2 JS |
477 | int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp); |
478 | void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); | |
606d099c | 479 | void (*setport)(struct stlport *portp, struct ktermios *tiosp); |
ca7ed0f2 JS |
480 | int (*getsignals)(struct stlport *portp); |
481 | void (*setsignals)(struct stlport *portp, int dtr, int rts); | |
482 | void (*enablerxtx)(struct stlport *portp, int rx, int tx); | |
483 | void (*startrxtx)(struct stlport *portp, int rx, int tx); | |
484 | void (*disableintrs)(struct stlport *portp); | |
485 | void (*sendbreak)(struct stlport *portp, int len); | |
486 | void (*flowctrl)(struct stlport *portp, int state); | |
487 | void (*sendflow)(struct stlport *portp, int state); | |
488 | void (*flush)(struct stlport *portp); | |
489 | int (*datastate)(struct stlport *portp); | |
490 | void (*intr)(struct stlpanel *panelp, unsigned int iobase); | |
1da177e4 LT |
491 | } uart_t; |
492 | ||
493 | /* | |
494 | * Define some macros to make calling these functions nice and clean. | |
495 | */ | |
496 | #define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit) | |
497 | #define stl_portinit (* ((uart_t *) portp->uartp)->portinit) | |
498 | #define stl_setport (* ((uart_t *) portp->uartp)->setport) | |
499 | #define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals) | |
500 | #define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals) | |
501 | #define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx) | |
502 | #define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx) | |
503 | #define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs) | |
504 | #define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak) | |
505 | #define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl) | |
506 | #define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow) | |
507 | #define stl_flush (* ((uart_t *) portp->uartp)->flush) | |
508 | #define stl_datastate (* ((uart_t *) portp->uartp)->datastate) | |
509 | ||
510 | /*****************************************************************************/ | |
511 | ||
512 | /* | |
513 | * CD1400 UART specific data initialization. | |
514 | */ | |
515 | static uart_t stl_cd1400uart = { | |
516 | stl_cd1400panelinit, | |
517 | stl_cd1400portinit, | |
518 | stl_cd1400setport, | |
519 | stl_cd1400getsignals, | |
520 | stl_cd1400setsignals, | |
521 | stl_cd1400enablerxtx, | |
522 | stl_cd1400startrxtx, | |
523 | stl_cd1400disableintrs, | |
524 | stl_cd1400sendbreak, | |
525 | stl_cd1400flowctrl, | |
526 | stl_cd1400sendflow, | |
527 | stl_cd1400flush, | |
528 | stl_cd1400datastate, | |
529 | stl_cd1400eiointr | |
530 | }; | |
531 | ||
532 | /* | |
533 | * Define the offsets within the register bank of a cd1400 based panel. | |
534 | * These io address offsets are common to the EasyIO board as well. | |
535 | */ | |
536 | #define EREG_ADDR 0 | |
537 | #define EREG_DATA 4 | |
538 | #define EREG_RXACK 5 | |
539 | #define EREG_TXACK 6 | |
540 | #define EREG_MDACK 7 | |
541 | ||
542 | #define EREG_BANKSIZE 8 | |
543 | ||
544 | #define CD1400_CLK 25000000 | |
545 | #define CD1400_CLK8M 20000000 | |
546 | ||
547 | /* | |
548 | * Define the cd1400 baud rate clocks. These are used when calculating | |
549 | * what clock and divisor to use for the required baud rate. Also | |
550 | * define the maximum baud rate allowed, and the default base baud. | |
551 | */ | |
552 | static int stl_cd1400clkdivs[] = { | |
553 | CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4 | |
554 | }; | |
555 | ||
556 | /*****************************************************************************/ | |
557 | ||
558 | /* | |
559 | * SC26198 UART specific data initization. | |
560 | */ | |
561 | static uart_t stl_sc26198uart = { | |
562 | stl_sc26198panelinit, | |
563 | stl_sc26198portinit, | |
564 | stl_sc26198setport, | |
565 | stl_sc26198getsignals, | |
566 | stl_sc26198setsignals, | |
567 | stl_sc26198enablerxtx, | |
568 | stl_sc26198startrxtx, | |
569 | stl_sc26198disableintrs, | |
570 | stl_sc26198sendbreak, | |
571 | stl_sc26198flowctrl, | |
572 | stl_sc26198sendflow, | |
573 | stl_sc26198flush, | |
574 | stl_sc26198datastate, | |
575 | stl_sc26198intr | |
576 | }; | |
577 | ||
578 | /* | |
579 | * Define the offsets within the register bank of a sc26198 based panel. | |
580 | */ | |
581 | #define XP_DATA 0 | |
582 | #define XP_ADDR 1 | |
583 | #define XP_MODID 2 | |
584 | #define XP_STATUS 2 | |
585 | #define XP_IACK 3 | |
586 | ||
587 | #define XP_BANKSIZE 4 | |
588 | ||
589 | /* | |
590 | * Define the sc26198 baud rate table. Offsets within the table | |
591 | * represent the actual baud rate selector of sc26198 registers. | |
592 | */ | |
593 | static unsigned int sc26198_baudtable[] = { | |
594 | 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600, | |
595 | 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, | |
596 | 230400, 460800, 921600 | |
597 | }; | |
598 | ||
fe971071 | 599 | #define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable) |
1da177e4 LT |
600 | |
601 | /*****************************************************************************/ | |
602 | ||
603 | /* | |
604 | * Define the driver info for a user level control device. Used mainly | |
605 | * to get at port stats - only not using the port device itself. | |
606 | */ | |
62322d25 | 607 | static const struct file_operations stl_fsiomem = { |
1da177e4 | 608 | .owner = THIS_MODULE, |
894cb917 | 609 | .unlocked_ioctl = stl_memioctl, |
6038f373 | 610 | .llseek = noop_llseek, |
1da177e4 LT |
611 | }; |
612 | ||
ca8eca68 | 613 | static struct class *stallion_class; |
1da177e4 | 614 | |
ccfea3c9 JS |
615 | static void stl_cd_change(struct stlport *portp) |
616 | { | |
617 | unsigned int oldsigs = portp->sigs; | |
d18a750f | 618 | struct tty_struct *tty = tty_port_tty_get(&portp->port); |
ccfea3c9 | 619 | |
d18a750f | 620 | if (!tty) |
ccfea3c9 JS |
621 | return; |
622 | ||
623 | portp->sigs = stl_getsignals(portp); | |
624 | ||
625 | if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) | |
f8ae4764 | 626 | wake_up_interruptible(&portp->port.open_wait); |
ccfea3c9 JS |
627 | |
628 | if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) | |
f8ae4764 | 629 | if (portp->port.flags & ASYNC_CHECK_CD) |
d18a750f AC |
630 | tty_hangup(tty); |
631 | tty_kref_put(tty); | |
ccfea3c9 JS |
632 | } |
633 | ||
1da177e4 LT |
634 | /* |
635 | * Check for any arguments passed in on the module load command line. | |
636 | */ | |
637 | ||
1da177e4 LT |
638 | /*****************************************************************************/ |
639 | ||
1da177e4 LT |
640 | /* |
641 | * Parse the supplied argument string, into the board conf struct. | |
642 | */ | |
643 | ||
40e82652 | 644 | static int __init stl_parsebrd(struct stlconf *confp, char **argp) |
1da177e4 LT |
645 | { |
646 | char *sp; | |
6b2c9457 | 647 | unsigned int i; |
1da177e4 | 648 | |
a0564e14 | 649 | pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp); |
1da177e4 | 650 | |
615e4a71 | 651 | if ((argp[0] == NULL) || (*argp[0] == 0)) |
014c2544 | 652 | return 0; |
1da177e4 | 653 | |
c62429d9 | 654 | for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++) |
843b568c | 655 | *sp = tolower(*sp); |
1da177e4 | 656 | |
c62429d9 | 657 | for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) |
1da177e4 LT |
658 | if (strcmp(stl_brdstr[i].name, argp[0]) == 0) |
659 | break; | |
c62429d9 | 660 | |
fe971071 | 661 | if (i == ARRAY_SIZE(stl_brdstr)) { |
1da177e4 | 662 | printk("STALLION: unknown board name, %s?\n", argp[0]); |
fe971071 | 663 | return 0; |
1da177e4 LT |
664 | } |
665 | ||
666 | confp->brdtype = stl_brdstr[i].type; | |
667 | ||
668 | i = 1; | |
615e4a71 | 669 | if ((argp[i] != NULL) && (*argp[i] != 0)) |
843b568c | 670 | confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0); |
1da177e4 LT |
671 | i++; |
672 | if (confp->brdtype == BRD_ECH) { | |
615e4a71 | 673 | if ((argp[i] != NULL) && (*argp[i] != 0)) |
843b568c | 674 | confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0); |
1da177e4 LT |
675 | i++; |
676 | } | |
615e4a71 | 677 | if ((argp[i] != NULL) && (*argp[i] != 0)) |
843b568c | 678 | confp->irq = simple_strtoul(argp[i], NULL, 0); |
014c2544 | 679 | return 1; |
1da177e4 LT |
680 | } |
681 | ||
682 | /*****************************************************************************/ | |
683 | ||
1da177e4 LT |
684 | /* |
685 | * Allocate a new board structure. Fill out the basic info in it. | |
686 | */ | |
687 | ||
ca7ed0f2 | 688 | static struct stlbrd *stl_allocbrd(void) |
1da177e4 | 689 | { |
ca7ed0f2 | 690 | struct stlbrd *brdp; |
1da177e4 | 691 | |
ca7ed0f2 | 692 | brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL); |
b0b4ed72 | 693 | if (!brdp) { |
b65b5b59 | 694 | printk("STALLION: failed to allocate memory (size=%Zd)\n", |
ca7ed0f2 | 695 | sizeof(struct stlbrd)); |
b0b4ed72 | 696 | return NULL; |
1da177e4 LT |
697 | } |
698 | ||
1da177e4 | 699 | brdp->magic = STL_BOARDMAGIC; |
014c2544 | 700 | return brdp; |
1da177e4 LT |
701 | } |
702 | ||
703 | /*****************************************************************************/ | |
704 | ||
047e9658 AC |
705 | static int stl_activate(struct tty_port *port, struct tty_struct *tty) |
706 | { | |
707 | struct stlport *portp = container_of(port, struct stlport, port); | |
708 | if (!portp->tx.buf) { | |
709 | portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); | |
710 | if (!portp->tx.buf) | |
711 | return -ENOMEM; | |
712 | portp->tx.head = portp->tx.buf; | |
713 | portp->tx.tail = portp->tx.buf; | |
714 | } | |
715 | stl_setport(portp, tty->termios); | |
716 | portp->sigs = stl_getsignals(portp); | |
717 | stl_setsignals(portp, 1, 1); | |
718 | stl_enablerxtx(portp, 1, 1); | |
719 | stl_startrxtx(portp, 1, 0); | |
720 | return 0; | |
721 | } | |
722 | ||
1da177e4 LT |
723 | static int stl_open(struct tty_struct *tty, struct file *filp) |
724 | { | |
ca7ed0f2 JS |
725 | struct stlport *portp; |
726 | struct stlbrd *brdp; | |
6b2c9457 | 727 | unsigned int minordev, brdnr, panelnr; |
4350f3ff | 728 | int portnr; |
1da177e4 | 729 | |
a0564e14 | 730 | pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); |
1da177e4 LT |
731 | |
732 | minordev = tty->index; | |
733 | brdnr = MINOR2BRD(minordev); | |
734 | if (brdnr >= stl_nrbrds) | |
014c2544 | 735 | return -ENODEV; |
1da177e4 | 736 | brdp = stl_brds[brdnr]; |
615e4a71 | 737 | if (brdp == NULL) |
014c2544 | 738 | return -ENODEV; |
4350f3ff | 739 | |
1da177e4 | 740 | minordev = MINOR2PORT(minordev); |
c62429d9 | 741 | for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { |
615e4a71 | 742 | if (brdp->panels[panelnr] == NULL) |
1da177e4 LT |
743 | break; |
744 | if (minordev < brdp->panels[panelnr]->nrports) { | |
745 | portnr = minordev; | |
746 | break; | |
747 | } | |
748 | minordev -= brdp->panels[panelnr]->nrports; | |
749 | } | |
750 | if (portnr < 0) | |
014c2544 | 751 | return -ENODEV; |
1da177e4 LT |
752 | |
753 | portp = brdp->panels[panelnr]->ports[portnr]; | |
615e4a71 | 754 | if (portp == NULL) |
014c2544 | 755 | return -ENODEV; |
a2d1e351 AC |
756 | |
757 | tty->driver_data = portp; | |
047e9658 | 758 | return tty_port_open(&portp->port, tty, filp); |
1da177e4 | 759 | |
1da177e4 LT |
760 | } |
761 | ||
762 | /*****************************************************************************/ | |
763 | ||
31f35939 AC |
764 | static int stl_carrier_raised(struct tty_port *port) |
765 | { | |
766 | struct stlport *portp = container_of(port, struct stlport, port); | |
767 | return (portp->sigs & TIOCM_CD) ? 1 : 0; | |
768 | } | |
769 | ||
fcc8ac18 | 770 | static void stl_dtr_rts(struct tty_port *port, int on) |
1da177e4 | 771 | { |
4350f3ff AC |
772 | struct stlport *portp = container_of(port, struct stlport, port); |
773 | /* Takes brd_lock internally */ | |
fcc8ac18 | 774 | stl_setsignals(portp, on, on); |
1da177e4 LT |
775 | } |
776 | ||
777 | /*****************************************************************************/ | |
778 | ||
96b066b8 JS |
779 | static void stl_flushbuffer(struct tty_struct *tty) |
780 | { | |
781 | struct stlport *portp; | |
782 | ||
783 | pr_debug("stl_flushbuffer(tty=%p)\n", tty); | |
784 | ||
96b066b8 JS |
785 | portp = tty->driver_data; |
786 | if (portp == NULL) | |
787 | return; | |
788 | ||
789 | stl_flush(portp); | |
790 | tty_wakeup(tty); | |
791 | } | |
792 | ||
793 | /*****************************************************************************/ | |
794 | ||
795 | static void stl_waituntilsent(struct tty_struct *tty, int timeout) | |
796 | { | |
797 | struct stlport *portp; | |
798 | unsigned long tend; | |
799 | ||
800 | pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); | |
801 | ||
96b066b8 JS |
802 | portp = tty->driver_data; |
803 | if (portp == NULL) | |
804 | return; | |
805 | ||
806 | if (timeout == 0) | |
807 | timeout = HZ; | |
808 | tend = jiffies + timeout; | |
809 | ||
810 | while (stl_datastate(portp)) { | |
811 | if (signal_pending(current)) | |
812 | break; | |
813 | msleep_interruptible(20); | |
814 | if (time_after_eq(jiffies, tend)) | |
815 | break; | |
816 | } | |
817 | } | |
818 | ||
819 | /*****************************************************************************/ | |
820 | ||
047e9658 | 821 | static void stl_shutdown(struct tty_port *port) |
1da177e4 | 822 | { |
047e9658 | 823 | struct stlport *portp = container_of(port, struct stlport, port); |
1da177e4 | 824 | stl_disableintrs(portp); |
1da177e4 | 825 | stl_enablerxtx(portp, 0, 0); |
047e9658 | 826 | stl_flush(portp); |
1da177e4 | 827 | portp->istate = 0; |
615e4a71 | 828 | if (portp->tx.buf != NULL) { |
1da177e4 | 829 | kfree(portp->tx.buf); |
615e4a71 JS |
830 | portp->tx.buf = NULL; |
831 | portp->tx.head = NULL; | |
832 | portp->tx.tail = NULL; | |
1da177e4 | 833 | } |
047e9658 AC |
834 | } |
835 | ||
836 | static void stl_close(struct tty_struct *tty, struct file *filp) | |
837 | { | |
838 | struct stlport*portp; | |
839 | pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); | |
1da177e4 | 840 | |
047e9658 | 841 | portp = tty->driver_data; |
a2d1e351 AC |
842 | if(portp == NULL) |
843 | return; | |
047e9658 | 844 | tty_port_close(&portp->port, tty, filp); |
1da177e4 LT |
845 | } |
846 | ||
847 | /*****************************************************************************/ | |
848 | ||
849 | /* | |
850 | * Write routine. Take data and stuff it in to the TX ring queue. | |
851 | * If transmit interrupts are not running then start them. | |
852 | */ | |
853 | ||
854 | static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count) | |
855 | { | |
ca7ed0f2 | 856 | struct stlport *portp; |
1da177e4 LT |
857 | unsigned int len, stlen; |
858 | unsigned char *chbuf; | |
859 | char *head, *tail; | |
860 | ||
a0564e14 | 861 | pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count); |
1da177e4 | 862 | |
1da177e4 | 863 | portp = tty->driver_data; |
615e4a71 | 864 | if (portp == NULL) |
014c2544 | 865 | return 0; |
615e4a71 | 866 | if (portp->tx.buf == NULL) |
014c2544 | 867 | return 0; |
1da177e4 LT |
868 | |
869 | /* | |
870 | * If copying direct from user space we must cater for page faults, | |
871 | * causing us to "sleep" here for a while. To handle this copy in all | |
872 | * the data we need now, into a local buffer. Then when we got it all | |
873 | * copy it into the TX buffer. | |
874 | */ | |
875 | chbuf = (unsigned char *) buf; | |
876 | ||
877 | head = portp->tx.head; | |
878 | tail = portp->tx.tail; | |
879 | if (head >= tail) { | |
880 | len = STL_TXBUFSIZE - (head - tail) - 1; | |
881 | stlen = STL_TXBUFSIZE - (head - portp->tx.buf); | |
882 | } else { | |
883 | len = tail - head - 1; | |
884 | stlen = len; | |
885 | } | |
886 | ||
843b568c | 887 | len = min(len, (unsigned int)count); |
1da177e4 LT |
888 | count = 0; |
889 | while (len > 0) { | |
843b568c | 890 | stlen = min(len, stlen); |
1da177e4 LT |
891 | memcpy(head, chbuf, stlen); |
892 | len -= stlen; | |
893 | chbuf += stlen; | |
894 | count += stlen; | |
895 | head += stlen; | |
896 | if (head >= (portp->tx.buf + STL_TXBUFSIZE)) { | |
897 | head = portp->tx.buf; | |
898 | stlen = tail - head; | |
899 | } | |
900 | } | |
901 | portp->tx.head = head; | |
902 | ||
903 | clear_bit(ASYI_TXLOW, &portp->istate); | |
904 | stl_startrxtx(portp, -1, 1); | |
905 | ||
014c2544 | 906 | return count; |
1da177e4 LT |
907 | } |
908 | ||
909 | /*****************************************************************************/ | |
910 | ||
4a561222 | 911 | static int stl_putchar(struct tty_struct *tty, unsigned char ch) |
1da177e4 | 912 | { |
ca7ed0f2 | 913 | struct stlport *portp; |
1da177e4 LT |
914 | unsigned int len; |
915 | char *head, *tail; | |
916 | ||
a0564e14 | 917 | pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch); |
1da177e4 | 918 | |
1da177e4 | 919 | portp = tty->driver_data; |
615e4a71 | 920 | if (portp == NULL) |
4a561222 | 921 | return -EINVAL; |
615e4a71 | 922 | if (portp->tx.buf == NULL) |
4a561222 | 923 | return -EINVAL; |
1da177e4 LT |
924 | |
925 | head = portp->tx.head; | |
926 | tail = portp->tx.tail; | |
927 | ||
928 | len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head); | |
929 | len--; | |
930 | ||
931 | if (len > 0) { | |
932 | *head++ = ch; | |
933 | if (head >= (portp->tx.buf + STL_TXBUFSIZE)) | |
934 | head = portp->tx.buf; | |
935 | } | |
936 | portp->tx.head = head; | |
4a561222 | 937 | return 0; |
1da177e4 LT |
938 | } |
939 | ||
940 | /*****************************************************************************/ | |
941 | ||
942 | /* | |
943 | * If there are any characters in the buffer then make sure that TX | |
944 | * interrupts are on and get'em out. Normally used after the putchar | |
945 | * routine has been called. | |
946 | */ | |
947 | ||
948 | static void stl_flushchars(struct tty_struct *tty) | |
949 | { | |
ca7ed0f2 | 950 | struct stlport *portp; |
1da177e4 | 951 | |
a0564e14 | 952 | pr_debug("stl_flushchars(tty=%p)\n", tty); |
1da177e4 | 953 | |
1da177e4 | 954 | portp = tty->driver_data; |
615e4a71 | 955 | if (portp == NULL) |
1da177e4 | 956 | return; |
615e4a71 | 957 | if (portp->tx.buf == NULL) |
1da177e4 LT |
958 | return; |
959 | ||
1da177e4 LT |
960 | stl_startrxtx(portp, -1, 1); |
961 | } | |
962 | ||
963 | /*****************************************************************************/ | |
964 | ||
965 | static int stl_writeroom(struct tty_struct *tty) | |
966 | { | |
ca7ed0f2 | 967 | struct stlport *portp; |
1da177e4 LT |
968 | char *head, *tail; |
969 | ||
a0564e14 | 970 | pr_debug("stl_writeroom(tty=%p)\n", tty); |
1da177e4 | 971 | |
1da177e4 | 972 | portp = tty->driver_data; |
615e4a71 | 973 | if (portp == NULL) |
014c2544 | 974 | return 0; |
615e4a71 | 975 | if (portp->tx.buf == NULL) |
014c2544 | 976 | return 0; |
1da177e4 LT |
977 | |
978 | head = portp->tx.head; | |
979 | tail = portp->tx.tail; | |
c62429d9 | 980 | return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1); |
1da177e4 LT |
981 | } |
982 | ||
983 | /*****************************************************************************/ | |
984 | ||
985 | /* | |
986 | * Return number of chars in the TX buffer. Normally we would just | |
987 | * calculate the number of chars in the buffer and return that, but if | |
988 | * the buffer is empty and TX interrupts are still on then we return | |
989 | * that the buffer still has 1 char in it. This way whoever called us | |
990 | * will not think that ALL chars have drained - since the UART still | |
991 | * must have some chars in it (we are busy after all). | |
992 | */ | |
993 | ||
994 | static int stl_charsinbuffer(struct tty_struct *tty) | |
995 | { | |
ca7ed0f2 | 996 | struct stlport *portp; |
1da177e4 LT |
997 | unsigned int size; |
998 | char *head, *tail; | |
999 | ||
a0564e14 | 1000 | pr_debug("stl_charsinbuffer(tty=%p)\n", tty); |
1da177e4 | 1001 | |
1da177e4 | 1002 | portp = tty->driver_data; |
615e4a71 | 1003 | if (portp == NULL) |
014c2544 | 1004 | return 0; |
615e4a71 | 1005 | if (portp->tx.buf == NULL) |
014c2544 | 1006 | return 0; |
1da177e4 LT |
1007 | |
1008 | head = portp->tx.head; | |
1009 | tail = portp->tx.tail; | |
1010 | size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
1011 | if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate)) | |
1012 | size = 1; | |
014c2544 | 1013 | return size; |
1da177e4 LT |
1014 | } |
1015 | ||
1016 | /*****************************************************************************/ | |
1017 | ||
1018 | /* | |
1019 | * Generate the serial struct info. | |
1020 | */ | |
1021 | ||
ca7ed0f2 | 1022 | static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) |
1da177e4 LT |
1023 | { |
1024 | struct serial_struct sio; | |
ca7ed0f2 | 1025 | struct stlbrd *brdp; |
1da177e4 | 1026 | |
a0564e14 | 1027 | pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); |
1da177e4 LT |
1028 | |
1029 | memset(&sio, 0, sizeof(struct serial_struct)); | |
b4eda9cb AC |
1030 | |
1031 | mutex_lock(&portp->port.mutex); | |
1da177e4 LT |
1032 | sio.line = portp->portnr; |
1033 | sio.port = portp->ioaddr; | |
f8ae4764 | 1034 | sio.flags = portp->port.flags; |
1da177e4 LT |
1035 | sio.baud_base = portp->baud_base; |
1036 | sio.close_delay = portp->close_delay; | |
1037 | sio.closing_wait = portp->closing_wait; | |
1038 | sio.custom_divisor = portp->custom_divisor; | |
1039 | sio.hub6 = 0; | |
1040 | if (portp->uartp == &stl_cd1400uart) { | |
1041 | sio.type = PORT_CIRRUS; | |
1042 | sio.xmit_fifo_size = CD1400_TXFIFOSIZE; | |
1043 | } else { | |
1044 | sio.type = PORT_UNKNOWN; | |
1045 | sio.xmit_fifo_size = SC26198_TXFIFOSIZE; | |
1046 | } | |
1047 | ||
1048 | brdp = stl_brds[portp->brdnr]; | |
615e4a71 | 1049 | if (brdp != NULL) |
1da177e4 | 1050 | sio.irq = brdp->irq; |
b4eda9cb | 1051 | mutex_unlock(&portp->port.mutex); |
1da177e4 LT |
1052 | |
1053 | return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; | |
1054 | } | |
1055 | ||
1056 | /*****************************************************************************/ | |
1057 | ||
1058 | /* | |
1059 | * Set port according to the serial struct info. | |
1060 | * At this point we do not do any auto-configure stuff, so we will | |
1061 | * just quietly ignore any requests to change irq, etc. | |
1062 | */ | |
1063 | ||
d18a750f | 1064 | static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp) |
1da177e4 | 1065 | { |
d18a750f | 1066 | struct stlport * portp = tty->driver_data; |
1da177e4 LT |
1067 | struct serial_struct sio; |
1068 | ||
a0564e14 | 1069 | pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp); |
1da177e4 LT |
1070 | |
1071 | if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) | |
1072 | return -EFAULT; | |
b4eda9cb | 1073 | mutex_lock(&portp->port.mutex); |
1da177e4 LT |
1074 | if (!capable(CAP_SYS_ADMIN)) { |
1075 | if ((sio.baud_base != portp->baud_base) || | |
1076 | (sio.close_delay != portp->close_delay) || | |
1077 | ((sio.flags & ~ASYNC_USR_MASK) != | |
b4eda9cb AC |
1078 | (portp->port.flags & ~ASYNC_USR_MASK))) { |
1079 | mutex_unlock(&portp->port.mutex); | |
014c2544 | 1080 | return -EPERM; |
b4eda9cb | 1081 | } |
1da177e4 LT |
1082 | } |
1083 | ||
f8ae4764 | 1084 | portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | |
1da177e4 LT |
1085 | (sio.flags & ASYNC_USR_MASK); |
1086 | portp->baud_base = sio.baud_base; | |
1087 | portp->close_delay = sio.close_delay; | |
1088 | portp->closing_wait = sio.closing_wait; | |
1089 | portp->custom_divisor = sio.custom_divisor; | |
b4eda9cb | 1090 | mutex_unlock(&portp->port.mutex); |
d18a750f | 1091 | stl_setport(portp, tty->termios); |
014c2544 | 1092 | return 0; |
1da177e4 LT |
1093 | } |
1094 | ||
1095 | /*****************************************************************************/ | |
1096 | ||
1097 | static int stl_tiocmget(struct tty_struct *tty, struct file *file) | |
1098 | { | |
ca7ed0f2 | 1099 | struct stlport *portp; |
1da177e4 | 1100 | |
1da177e4 | 1101 | portp = tty->driver_data; |
615e4a71 | 1102 | if (portp == NULL) |
014c2544 | 1103 | return -ENODEV; |
1da177e4 | 1104 | if (tty->flags & (1 << TTY_IO_ERROR)) |
014c2544 | 1105 | return -EIO; |
1da177e4 LT |
1106 | |
1107 | return stl_getsignals(portp); | |
1108 | } | |
1109 | ||
1110 | static int stl_tiocmset(struct tty_struct *tty, struct file *file, | |
1111 | unsigned int set, unsigned int clear) | |
1112 | { | |
ca7ed0f2 | 1113 | struct stlport *portp; |
1da177e4 LT |
1114 | int rts = -1, dtr = -1; |
1115 | ||
1da177e4 | 1116 | portp = tty->driver_data; |
615e4a71 | 1117 | if (portp == NULL) |
014c2544 | 1118 | return -ENODEV; |
1da177e4 | 1119 | if (tty->flags & (1 << TTY_IO_ERROR)) |
014c2544 | 1120 | return -EIO; |
1da177e4 LT |
1121 | |
1122 | if (set & TIOCM_RTS) | |
1123 | rts = 1; | |
1124 | if (set & TIOCM_DTR) | |
1125 | dtr = 1; | |
1126 | if (clear & TIOCM_RTS) | |
1127 | rts = 0; | |
1128 | if (clear & TIOCM_DTR) | |
1129 | dtr = 0; | |
1130 | ||
1131 | stl_setsignals(portp, dtr, rts); | |
1132 | return 0; | |
1133 | } | |
1134 | ||
1135 | static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) | |
1136 | { | |
ca7ed0f2 | 1137 | struct stlport *portp; |
1da177e4 LT |
1138 | int rc; |
1139 | void __user *argp = (void __user *)arg; | |
1140 | ||
a0564e14 JS |
1141 | pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd, |
1142 | arg); | |
1da177e4 | 1143 | |
1da177e4 | 1144 | portp = tty->driver_data; |
615e4a71 | 1145 | if (portp == NULL) |
014c2544 | 1146 | return -ENODEV; |
1da177e4 LT |
1147 | |
1148 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
c62429d9 | 1149 | (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) |
1da177e4 | 1150 | if (tty->flags & (1 << TTY_IO_ERROR)) |
014c2544 | 1151 | return -EIO; |
1da177e4 LT |
1152 | |
1153 | rc = 0; | |
1154 | ||
1155 | switch (cmd) { | |
1da177e4 LT |
1156 | case TIOCGSERIAL: |
1157 | rc = stl_getserial(portp, argp); | |
1158 | break; | |
1159 | case TIOCSSERIAL: | |
d18a750f | 1160 | rc = stl_setserial(tty, argp); |
1da177e4 LT |
1161 | break; |
1162 | case COM_GETPORTSTATS: | |
d18a750f | 1163 | rc = stl_getportstats(tty, portp, argp); |
1da177e4 LT |
1164 | break; |
1165 | case COM_CLRPORTSTATS: | |
1166 | rc = stl_clrportstats(portp, argp); | |
1167 | break; | |
1168 | case TIOCSERCONFIG: | |
1169 | case TIOCSERGWILD: | |
1170 | case TIOCSERSWILD: | |
1171 | case TIOCSERGETLSR: | |
1172 | case TIOCSERGSTRUCT: | |
1173 | case TIOCSERGETMULTI: | |
1174 | case TIOCSERSETMULTI: | |
1175 | default: | |
1176 | rc = -ENOIOCTLCMD; | |
1177 | break; | |
1178 | } | |
014c2544 | 1179 | return rc; |
1da177e4 LT |
1180 | } |
1181 | ||
1182 | /*****************************************************************************/ | |
1183 | ||
96b066b8 JS |
1184 | /* |
1185 | * Start the transmitter again. Just turn TX interrupts back on. | |
1186 | */ | |
1187 | ||
1188 | static void stl_start(struct tty_struct *tty) | |
1189 | { | |
1190 | struct stlport *portp; | |
1191 | ||
1192 | pr_debug("stl_start(tty=%p)\n", tty); | |
1193 | ||
96b066b8 JS |
1194 | portp = tty->driver_data; |
1195 | if (portp == NULL) | |
1196 | return; | |
1197 | stl_startrxtx(portp, -1, 1); | |
1198 | } | |
1199 | ||
1200 | /*****************************************************************************/ | |
1201 | ||
606d099c | 1202 | static void stl_settermios(struct tty_struct *tty, struct ktermios *old) |
1da177e4 | 1203 | { |
ca7ed0f2 | 1204 | struct stlport *portp; |
606d099c | 1205 | struct ktermios *tiosp; |
1da177e4 | 1206 | |
a0564e14 | 1207 | pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old); |
1da177e4 | 1208 | |
1da177e4 | 1209 | portp = tty->driver_data; |
615e4a71 | 1210 | if (portp == NULL) |
1da177e4 LT |
1211 | return; |
1212 | ||
1213 | tiosp = tty->termios; | |
1214 | if ((tiosp->c_cflag == old->c_cflag) && | |
1215 | (tiosp->c_iflag == old->c_iflag)) | |
1216 | return; | |
1217 | ||
1218 | stl_setport(portp, tiosp); | |
1219 | stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0), | |
1220 | -1); | |
1221 | if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) { | |
1222 | tty->hw_stopped = 0; | |
1223 | stl_start(tty); | |
1224 | } | |
1225 | if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) | |
f8ae4764 | 1226 | wake_up_interruptible(&portp->port.open_wait); |
1da177e4 LT |
1227 | } |
1228 | ||
1229 | /*****************************************************************************/ | |
1230 | ||
1231 | /* | |
1232 | * Attempt to flow control who ever is sending us data. Based on termios | |
1233 | * settings use software or/and hardware flow control. | |
1234 | */ | |
1235 | ||
1236 | static void stl_throttle(struct tty_struct *tty) | |
1237 | { | |
ca7ed0f2 | 1238 | struct stlport *portp; |
1da177e4 | 1239 | |
a0564e14 | 1240 | pr_debug("stl_throttle(tty=%p)\n", tty); |
1da177e4 | 1241 | |
1da177e4 | 1242 | portp = tty->driver_data; |
615e4a71 | 1243 | if (portp == NULL) |
1da177e4 LT |
1244 | return; |
1245 | stl_flowctrl(portp, 0); | |
1246 | } | |
1247 | ||
1248 | /*****************************************************************************/ | |
1249 | ||
1250 | /* | |
1251 | * Unflow control the device sending us data... | |
1252 | */ | |
1253 | ||
1254 | static void stl_unthrottle(struct tty_struct *tty) | |
1255 | { | |
ca7ed0f2 | 1256 | struct stlport *portp; |
1da177e4 | 1257 | |
a0564e14 | 1258 | pr_debug("stl_unthrottle(tty=%p)\n", tty); |
1da177e4 | 1259 | |
1da177e4 | 1260 | portp = tty->driver_data; |
615e4a71 | 1261 | if (portp == NULL) |
1da177e4 LT |
1262 | return; |
1263 | stl_flowctrl(portp, 1); | |
1264 | } | |
1265 | ||
1266 | /*****************************************************************************/ | |
1267 | ||
1268 | /* | |
1269 | * Stop the transmitter. Basically to do this we will just turn TX | |
1270 | * interrupts off. | |
1271 | */ | |
1272 | ||
1273 | static void stl_stop(struct tty_struct *tty) | |
1274 | { | |
ca7ed0f2 | 1275 | struct stlport *portp; |
1da177e4 | 1276 | |
a0564e14 | 1277 | pr_debug("stl_stop(tty=%p)\n", tty); |
1da177e4 | 1278 | |
1da177e4 | 1279 | portp = tty->driver_data; |
615e4a71 | 1280 | if (portp == NULL) |
1da177e4 LT |
1281 | return; |
1282 | stl_startrxtx(portp, -1, 0); | |
1283 | } | |
1284 | ||
1285 | /*****************************************************************************/ | |
1286 | ||
1da177e4 LT |
1287 | /* |
1288 | * Hangup this port. This is pretty much like closing the port, only | |
1289 | * a little more brutal. No waiting for data to drain. Shutdown the | |
1290 | * port and maybe drop signals. | |
1291 | */ | |
1292 | ||
1293 | static void stl_hangup(struct tty_struct *tty) | |
1294 | { | |
047e9658 | 1295 | struct stlport *portp = tty->driver_data; |
a0564e14 | 1296 | pr_debug("stl_hangup(tty=%p)\n", tty); |
1da177e4 | 1297 | |
615e4a71 | 1298 | if (portp == NULL) |
1da177e4 | 1299 | return; |
047e9658 | 1300 | tty_port_hangup(&portp->port); |
1da177e4 LT |
1301 | } |
1302 | ||
1303 | /*****************************************************************************/ | |
1304 | ||
4a561222 | 1305 | static int stl_breakctl(struct tty_struct *tty, int state) |
1da177e4 | 1306 | { |
ca7ed0f2 | 1307 | struct stlport *portp; |
1da177e4 | 1308 | |
a0564e14 | 1309 | pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state); |
1da177e4 | 1310 | |
1da177e4 | 1311 | portp = tty->driver_data; |
615e4a71 | 1312 | if (portp == NULL) |
4a561222 | 1313 | return -EINVAL; |
1da177e4 LT |
1314 | |
1315 | stl_sendbreak(portp, ((state == -1) ? 1 : 2)); | |
4a561222 | 1316 | return 0; |
1da177e4 LT |
1317 | } |
1318 | ||
1319 | /*****************************************************************************/ | |
1320 | ||
1da177e4 LT |
1321 | static void stl_sendxchar(struct tty_struct *tty, char ch) |
1322 | { | |
ca7ed0f2 | 1323 | struct stlport *portp; |
1da177e4 | 1324 | |
a0564e14 | 1325 | pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch); |
1da177e4 | 1326 | |
1da177e4 | 1327 | portp = tty->driver_data; |
615e4a71 | 1328 | if (portp == NULL) |
1da177e4 LT |
1329 | return; |
1330 | ||
1331 | if (ch == STOP_CHAR(tty)) | |
1332 | stl_sendflow(portp, 0); | |
1333 | else if (ch == START_CHAR(tty)) | |
1334 | stl_sendflow(portp, 1); | |
1335 | else | |
1336 | stl_putchar(tty, ch); | |
1337 | } | |
1338 | ||
8561c44c | 1339 | static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr) |
1da177e4 | 1340 | { |
8561c44c AD |
1341 | int sigs; |
1342 | char sep; | |
1da177e4 | 1343 | |
8561c44c | 1344 | seq_printf(m, "%d: uart:%s tx:%d rx:%d", |
1da177e4 LT |
1345 | portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", |
1346 | (int) portp->stats.txtotal, (int) portp->stats.rxtotal); | |
1347 | ||
1348 | if (portp->stats.rxframing) | |
8561c44c | 1349 | seq_printf(m, " fe:%d", (int) portp->stats.rxframing); |
1da177e4 | 1350 | if (portp->stats.rxparity) |
8561c44c | 1351 | seq_printf(m, " pe:%d", (int) portp->stats.rxparity); |
1da177e4 | 1352 | if (portp->stats.rxbreaks) |
8561c44c | 1353 | seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks); |
1da177e4 | 1354 | if (portp->stats.rxoverrun) |
8561c44c | 1355 | seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun); |
1da177e4 LT |
1356 | |
1357 | sigs = stl_getsignals(portp); | |
8561c44c AD |
1358 | sep = ' '; |
1359 | if (sigs & TIOCM_RTS) { | |
1360 | seq_printf(m, "%c%s", sep, "RTS"); | |
1361 | sep = '|'; | |
1362 | } | |
1363 | if (sigs & TIOCM_CTS) { | |
1364 | seq_printf(m, "%c%s", sep, "CTS"); | |
1365 | sep = '|'; | |
1366 | } | |
1367 | if (sigs & TIOCM_DTR) { | |
1368 | seq_printf(m, "%c%s", sep, "DTR"); | |
1369 | sep = '|'; | |
1370 | } | |
1371 | if (sigs & TIOCM_CD) { | |
1372 | seq_printf(m, "%c%s", sep, "DCD"); | |
1373 | sep = '|'; | |
1374 | } | |
1375 | if (sigs & TIOCM_DSR) { | |
1376 | seq_printf(m, "%c%s", sep, "DSR"); | |
1377 | sep = '|'; | |
1378 | } | |
1379 | seq_putc(m, '\n'); | |
1da177e4 LT |
1380 | } |
1381 | ||
1382 | /*****************************************************************************/ | |
1383 | ||
1384 | /* | |
1385 | * Port info, read from the /proc file system. | |
1386 | */ | |
1387 | ||
8561c44c | 1388 | static int stl_proc_show(struct seq_file *m, void *v) |
1da177e4 | 1389 | { |
ca7ed0f2 JS |
1390 | struct stlbrd *brdp; |
1391 | struct stlpanel *panelp; | |
1392 | struct stlport *portp; | |
6b2c9457 | 1393 | unsigned int brdnr, panelnr, portnr; |
8561c44c | 1394 | int totalport; |
1da177e4 | 1395 | |
1da177e4 | 1396 | totalport = 0; |
8561c44c AD |
1397 | |
1398 | seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion); | |
1da177e4 LT |
1399 | |
1400 | /* | |
1401 | * We scan through for each board, panel and port. The offset is | |
1402 | * calculated on the fly, and irrelevant ports are skipped. | |
1403 | */ | |
c62429d9 | 1404 | for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) { |
1da177e4 | 1405 | brdp = stl_brds[brdnr]; |
615e4a71 | 1406 | if (brdp == NULL) |
1da177e4 LT |
1407 | continue; |
1408 | if (brdp->state == 0) | |
1409 | continue; | |
1410 | ||
1da177e4 | 1411 | totalport = brdnr * STL_MAXPORTS; |
c62429d9 | 1412 | for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) { |
1da177e4 | 1413 | panelp = brdp->panels[panelnr]; |
615e4a71 | 1414 | if (panelp == NULL) |
1da177e4 LT |
1415 | continue; |
1416 | ||
c62429d9 | 1417 | for (portnr = 0; portnr < panelp->nrports; portnr++, |
1da177e4 LT |
1418 | totalport++) { |
1419 | portp = panelp->ports[portnr]; | |
615e4a71 | 1420 | if (portp == NULL) |
1da177e4 | 1421 | continue; |
8561c44c | 1422 | stl_portinfo(m, portp, totalport); |
1da177e4 LT |
1423 | } |
1424 | } | |
1425 | } | |
8561c44c AD |
1426 | return 0; |
1427 | } | |
1da177e4 | 1428 | |
8561c44c AD |
1429 | static int stl_proc_open(struct inode *inode, struct file *file) |
1430 | { | |
1431 | return single_open(file, stl_proc_show, NULL); | |
1da177e4 LT |
1432 | } |
1433 | ||
8561c44c AD |
1434 | static const struct file_operations stl_proc_fops = { |
1435 | .owner = THIS_MODULE, | |
1436 | .open = stl_proc_open, | |
1437 | .read = seq_read, | |
1438 | .llseek = seq_lseek, | |
1439 | .release = single_release, | |
1440 | }; | |
1441 | ||
1da177e4 LT |
1442 | /*****************************************************************************/ |
1443 | ||
1444 | /* | |
1445 | * All board interrupts are vectored through here first. This code then | |
1446 | * calls off to the approrpriate board interrupt handlers. | |
1447 | */ | |
1448 | ||
7d12e780 | 1449 | static irqreturn_t stl_intr(int irq, void *dev_id) |
1da177e4 | 1450 | { |
ca7ed0f2 | 1451 | struct stlbrd *brdp = dev_id; |
1da177e4 | 1452 | |
a6f97b29 | 1453 | pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, brdp->irq); |
1da177e4 LT |
1454 | |
1455 | return IRQ_RETVAL((* brdp->isr)(brdp)); | |
1456 | } | |
1457 | ||
1458 | /*****************************************************************************/ | |
1459 | ||
1460 | /* | |
1461 | * Interrupt service routine for EasyIO board types. | |
1462 | */ | |
1463 | ||
ca7ed0f2 | 1464 | static int stl_eiointr(struct stlbrd *brdp) |
1da177e4 | 1465 | { |
ca7ed0f2 | 1466 | struct stlpanel *panelp; |
1da177e4 LT |
1467 | unsigned int iobase; |
1468 | int handled = 0; | |
1469 | ||
b65b5b59 | 1470 | spin_lock(&brd_lock); |
1da177e4 LT |
1471 | panelp = brdp->panels[0]; |
1472 | iobase = panelp->iobase; | |
1473 | while (inb(brdp->iostatus) & EIO_INTRPEND) { | |
1474 | handled = 1; | |
1475 | (* panelp->isr)(panelp, iobase); | |
1476 | } | |
b65b5b59 | 1477 | spin_unlock(&brd_lock); |
1da177e4 LT |
1478 | return handled; |
1479 | } | |
1480 | ||
1481 | /*****************************************************************************/ | |
1482 | ||
1483 | /* | |
1484 | * Interrupt service routine for ECH-AT board types. | |
1485 | */ | |
1486 | ||
ca7ed0f2 | 1487 | static int stl_echatintr(struct stlbrd *brdp) |
1da177e4 | 1488 | { |
ca7ed0f2 | 1489 | struct stlpanel *panelp; |
6b2c9457 | 1490 | unsigned int ioaddr, bnknr; |
1da177e4 LT |
1491 | int handled = 0; |
1492 | ||
1493 | outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); | |
1494 | ||
1495 | while (inb(brdp->iostatus) & ECH_INTRPEND) { | |
1496 | handled = 1; | |
c62429d9 | 1497 | for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { |
1da177e4 LT |
1498 | ioaddr = brdp->bnkstataddr[bnknr]; |
1499 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
1500 | panelp = brdp->bnk2panel[bnknr]; | |
1501 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
1502 | } | |
1503 | } | |
1504 | } | |
1505 | ||
1506 | outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); | |
1507 | ||
1508 | return handled; | |
1509 | } | |
1510 | ||
1511 | /*****************************************************************************/ | |
1512 | ||
1513 | /* | |
1514 | * Interrupt service routine for ECH-MCA board types. | |
1515 | */ | |
1516 | ||
ca7ed0f2 | 1517 | static int stl_echmcaintr(struct stlbrd *brdp) |
1da177e4 | 1518 | { |
ca7ed0f2 | 1519 | struct stlpanel *panelp; |
6b2c9457 | 1520 | unsigned int ioaddr, bnknr; |
1da177e4 LT |
1521 | int handled = 0; |
1522 | ||
1523 | while (inb(brdp->iostatus) & ECH_INTRPEND) { | |
1524 | handled = 1; | |
c62429d9 | 1525 | for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { |
1da177e4 LT |
1526 | ioaddr = brdp->bnkstataddr[bnknr]; |
1527 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
1528 | panelp = brdp->bnk2panel[bnknr]; | |
1529 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
1530 | } | |
1531 | } | |
1532 | } | |
1533 | return handled; | |
1534 | } | |
1535 | ||
1536 | /*****************************************************************************/ | |
1537 | ||
1538 | /* | |
1539 | * Interrupt service routine for ECH-PCI board types. | |
1540 | */ | |
1541 | ||
ca7ed0f2 | 1542 | static int stl_echpciintr(struct stlbrd *brdp) |
1da177e4 | 1543 | { |
ca7ed0f2 | 1544 | struct stlpanel *panelp; |
6b2c9457 | 1545 | unsigned int ioaddr, bnknr, recheck; |
1da177e4 LT |
1546 | int handled = 0; |
1547 | ||
1548 | while (1) { | |
1549 | recheck = 0; | |
c62429d9 | 1550 | for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { |
1da177e4 LT |
1551 | outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl); |
1552 | ioaddr = brdp->bnkstataddr[bnknr]; | |
1553 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
1554 | panelp = brdp->bnk2panel[bnknr]; | |
1555 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
1556 | recheck++; | |
1557 | handled = 1; | |
1558 | } | |
1559 | } | |
1560 | if (! recheck) | |
1561 | break; | |
1562 | } | |
1563 | return handled; | |
1564 | } | |
1565 | ||
1566 | /*****************************************************************************/ | |
1567 | ||
1568 | /* | |
1569 | * Interrupt service routine for ECH-8/64-PCI board types. | |
1570 | */ | |
1571 | ||
ca7ed0f2 | 1572 | static int stl_echpci64intr(struct stlbrd *brdp) |
1da177e4 | 1573 | { |
ca7ed0f2 | 1574 | struct stlpanel *panelp; |
6b2c9457 | 1575 | unsigned int ioaddr, bnknr; |
1da177e4 LT |
1576 | int handled = 0; |
1577 | ||
1578 | while (inb(brdp->ioctrl) & 0x1) { | |
1579 | handled = 1; | |
c62429d9 | 1580 | for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { |
1da177e4 LT |
1581 | ioaddr = brdp->bnkstataddr[bnknr]; |
1582 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
1583 | panelp = brdp->bnk2panel[bnknr]; | |
1584 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
1585 | } | |
1586 | } | |
1587 | } | |
1588 | ||
1589 | return handled; | |
1590 | } | |
1591 | ||
1592 | /*****************************************************************************/ | |
1593 | ||
1da177e4 LT |
1594 | /* |
1595 | * Initialize all the ports on a panel. | |
1596 | */ | |
1597 | ||
705c1862 | 1598 | static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) |
1da177e4 | 1599 | { |
6b2c9457 JS |
1600 | struct stlport *portp; |
1601 | unsigned int i; | |
1602 | int chipmask; | |
1da177e4 | 1603 | |
a0564e14 | 1604 | pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp); |
1da177e4 LT |
1605 | |
1606 | chipmask = stl_panelinit(brdp, panelp); | |
1607 | ||
1608 | /* | |
1609 | * All UART's are initialized (if found!). Now go through and setup | |
1610 | * each ports data structures. | |
1611 | */ | |
c62429d9 | 1612 | for (i = 0; i < panelp->nrports; i++) { |
ca7ed0f2 | 1613 | portp = kzalloc(sizeof(struct stlport), GFP_KERNEL); |
b0b4ed72 | 1614 | if (!portp) { |
1da177e4 | 1615 | printk("STALLION: failed to allocate memory " |
ca7ed0f2 | 1616 | "(size=%Zd)\n", sizeof(struct stlport)); |
1da177e4 LT |
1617 | break; |
1618 | } | |
d18a750f | 1619 | tty_port_init(&portp->port); |
31f35939 | 1620 | portp->port.ops = &stl_port_ops; |
1da177e4 LT |
1621 | portp->magic = STL_PORTMAGIC; |
1622 | portp->portnr = i; | |
1623 | portp->brdnr = panelp->brdnr; | |
1624 | portp->panelnr = panelp->panelnr; | |
1625 | portp->uartp = panelp->uartp; | |
1626 | portp->clk = brdp->clk; | |
1627 | portp->baud_base = STL_BAUDBASE; | |
1628 | portp->close_delay = STL_CLOSEDELAY; | |
1629 | portp->closing_wait = 30 * HZ; | |
f8ae4764 AC |
1630 | init_waitqueue_head(&portp->port.open_wait); |
1631 | init_waitqueue_head(&portp->port.close_wait); | |
1da177e4 LT |
1632 | portp->stats.brd = portp->brdnr; |
1633 | portp->stats.panel = portp->panelnr; | |
1634 | portp->stats.port = portp->portnr; | |
1635 | panelp->ports[i] = portp; | |
1636 | stl_portinit(brdp, panelp, portp); | |
1637 | } | |
1638 | ||
c62429d9 | 1639 | return 0; |
1da177e4 LT |
1640 | } |
1641 | ||
3b85b341 JS |
1642 | static void stl_cleanup_panels(struct stlbrd *brdp) |
1643 | { | |
1644 | struct stlpanel *panelp; | |
1645 | struct stlport *portp; | |
1646 | unsigned int j, k; | |
d18a750f | 1647 | struct tty_struct *tty; |
3b85b341 JS |
1648 | |
1649 | for (j = 0; j < STL_MAXPANELS; j++) { | |
1650 | panelp = brdp->panels[j]; | |
1651 | if (panelp == NULL) | |
1652 | continue; | |
1653 | for (k = 0; k < STL_PORTSPERPANEL; k++) { | |
1654 | portp = panelp->ports[k]; | |
1655 | if (portp == NULL) | |
1656 | continue; | |
d18a750f AC |
1657 | tty = tty_port_tty_get(&portp->port); |
1658 | if (tty != NULL) { | |
1659 | stl_hangup(tty); | |
1660 | tty_kref_put(tty); | |
1661 | } | |
3b85b341 JS |
1662 | kfree(portp->tx.buf); |
1663 | kfree(portp); | |
1664 | } | |
1665 | kfree(panelp); | |
1666 | } | |
1667 | } | |
1668 | ||
1da177e4 LT |
1669 | /*****************************************************************************/ |
1670 | ||
1671 | /* | |
1672 | * Try to find and initialize an EasyIO board. | |
1673 | */ | |
1674 | ||
705c1862 | 1675 | static int __devinit stl_initeio(struct stlbrd *brdp) |
1da177e4 | 1676 | { |
ca7ed0f2 | 1677 | struct stlpanel *panelp; |
1da177e4 LT |
1678 | unsigned int status; |
1679 | char *name; | |
3b85b341 | 1680 | int retval; |
1da177e4 | 1681 | |
a0564e14 | 1682 | pr_debug("stl_initeio(brdp=%p)\n", brdp); |
1da177e4 LT |
1683 | |
1684 | brdp->ioctrl = brdp->ioaddr1 + 1; | |
1685 | brdp->iostatus = brdp->ioaddr1 + 2; | |
1686 | ||
1687 | status = inb(brdp->iostatus); | |
1688 | if ((status & EIO_IDBITMASK) == EIO_MK3) | |
1689 | brdp->ioctrl++; | |
1690 | ||
1691 | /* | |
1692 | * Handle board specific stuff now. The real difference is PCI | |
1693 | * or not PCI. | |
1694 | */ | |
1695 | if (brdp->brdtype == BRD_EASYIOPCI) { | |
1696 | brdp->iosize1 = 0x80; | |
1697 | brdp->iosize2 = 0x80; | |
1698 | name = "serial(EIO-PCI)"; | |
1699 | outb(0x41, (brdp->ioaddr2 + 0x4c)); | |
1700 | } else { | |
1701 | brdp->iosize1 = 8; | |
1702 | name = "serial(EIO)"; | |
1703 | if ((brdp->irq < 0) || (brdp->irq > 15) || | |
1704 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
1705 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
1706 | brdp->irq, brdp->brdnr); | |
3b85b341 JS |
1707 | retval = -EINVAL; |
1708 | goto err; | |
1da177e4 LT |
1709 | } |
1710 | outb((stl_vecmap[brdp->irq] | EIO_0WS | | |
1711 | ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)), | |
1712 | brdp->ioctrl); | |
1713 | } | |
1714 | ||
3b85b341 | 1715 | retval = -EBUSY; |
1da177e4 LT |
1716 | if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { |
1717 | printk(KERN_WARNING "STALLION: Warning, board %d I/O address " | |
1718 | "%x conflicts with another device\n", brdp->brdnr, | |
1719 | brdp->ioaddr1); | |
3b85b341 | 1720 | goto err; |
1da177e4 LT |
1721 | } |
1722 | ||
1723 | if (brdp->iosize2 > 0) | |
1724 | if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { | |
1725 | printk(KERN_WARNING "STALLION: Warning, board %d I/O " | |
1726 | "address %x conflicts with another device\n", | |
1727 | brdp->brdnr, brdp->ioaddr2); | |
1728 | printk(KERN_WARNING "STALLION: Warning, also " | |
1729 | "releasing board %d I/O address %x \n", | |
1730 | brdp->brdnr, brdp->ioaddr1); | |
3b85b341 | 1731 | goto err_rel1; |
1da177e4 LT |
1732 | } |
1733 | ||
1734 | /* | |
1735 | * Everything looks OK, so let's go ahead and probe for the hardware. | |
1736 | */ | |
1737 | brdp->clk = CD1400_CLK; | |
1738 | brdp->isr = stl_eiointr; | |
1739 | ||
3b85b341 | 1740 | retval = -ENODEV; |
1da177e4 LT |
1741 | switch (status & EIO_IDBITMASK) { |
1742 | case EIO_8PORTM: | |
1743 | brdp->clk = CD1400_CLK8M; | |
1744 | /* fall thru */ | |
1745 | case EIO_8PORTRS: | |
1746 | case EIO_8PORTDI: | |
1747 | brdp->nrports = 8; | |
1748 | break; | |
1749 | case EIO_4PORTRS: | |
1750 | brdp->nrports = 4; | |
1751 | break; | |
1752 | case EIO_MK3: | |
1753 | switch (status & EIO_BRDMASK) { | |
1754 | case ID_BRD4: | |
1755 | brdp->nrports = 4; | |
1756 | break; | |
1757 | case ID_BRD8: | |
1758 | brdp->nrports = 8; | |
1759 | break; | |
1760 | case ID_BRD16: | |
1761 | brdp->nrports = 16; | |
1762 | break; | |
1763 | default: | |
3b85b341 | 1764 | goto err_rel2; |
1da177e4 LT |
1765 | } |
1766 | break; | |
1767 | default: | |
3b85b341 | 1768 | goto err_rel2; |
1da177e4 LT |
1769 | } |
1770 | ||
1771 | /* | |
1772 | * We have verified that the board is actually present, so now we | |
1773 | * can complete the setup. | |
1774 | */ | |
1775 | ||
ca7ed0f2 | 1776 | panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); |
b0b4ed72 | 1777 | if (!panelp) { |
1da177e4 | 1778 | printk(KERN_WARNING "STALLION: failed to allocate memory " |
ca7ed0f2 | 1779 | "(size=%Zd)\n", sizeof(struct stlpanel)); |
3b85b341 JS |
1780 | retval = -ENOMEM; |
1781 | goto err_rel2; | |
1da177e4 | 1782 | } |
1da177e4 LT |
1783 | |
1784 | panelp->magic = STL_PANELMAGIC; | |
1785 | panelp->brdnr = brdp->brdnr; | |
1786 | panelp->panelnr = 0; | |
1787 | panelp->nrports = brdp->nrports; | |
1788 | panelp->iobase = brdp->ioaddr1; | |
1789 | panelp->hwid = status; | |
1790 | if ((status & EIO_IDBITMASK) == EIO_MK3) { | |
615e4a71 | 1791 | panelp->uartp = &stl_sc26198uart; |
1da177e4 LT |
1792 | panelp->isr = stl_sc26198intr; |
1793 | } else { | |
615e4a71 | 1794 | panelp->uartp = &stl_cd1400uart; |
1da177e4 LT |
1795 | panelp->isr = stl_cd1400eiointr; |
1796 | } | |
1797 | ||
1798 | brdp->panels[0] = panelp; | |
1799 | brdp->nrpanels = 1; | |
1800 | brdp->state |= BRD_FOUND; | |
1801 | brdp->hwid = status; | |
0f2ed4c6 | 1802 | if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { |
1da177e4 LT |
1803 | printk("STALLION: failed to register interrupt " |
1804 | "routine for %s irq=%d\n", name, brdp->irq); | |
3b85b341 JS |
1805 | retval = -ENODEV; |
1806 | goto err_fr; | |
1da177e4 | 1807 | } |
3b85b341 JS |
1808 | |
1809 | return 0; | |
1810 | err_fr: | |
1811 | stl_cleanup_panels(brdp); | |
1812 | err_rel2: | |
1813 | if (brdp->iosize2 > 0) | |
1814 | release_region(brdp->ioaddr2, brdp->iosize2); | |
1815 | err_rel1: | |
1816 | release_region(brdp->ioaddr1, brdp->iosize1); | |
1817 | err: | |
1818 | return retval; | |
1da177e4 LT |
1819 | } |
1820 | ||
1821 | /*****************************************************************************/ | |
1822 | ||
1823 | /* | |
1824 | * Try to find an ECH board and initialize it. This code is capable of | |
1825 | * dealing with all types of ECH board. | |
1826 | */ | |
1827 | ||
705c1862 | 1828 | static int __devinit stl_initech(struct stlbrd *brdp) |
1da177e4 | 1829 | { |
ca7ed0f2 | 1830 | struct stlpanel *panelp; |
6b2c9457 JS |
1831 | unsigned int status, nxtid, ioaddr, conflict, panelnr, banknr, i; |
1832 | int retval; | |
1da177e4 LT |
1833 | char *name; |
1834 | ||
a0564e14 | 1835 | pr_debug("stl_initech(brdp=%p)\n", brdp); |
1da177e4 LT |
1836 | |
1837 | status = 0; | |
1838 | conflict = 0; | |
1839 | ||
1840 | /* | |
1841 | * Set up the initial board register contents for boards. This varies a | |
1842 | * bit between the different board types. So we need to handle each | |
1843 | * separately. Also do a check that the supplied IRQ is good. | |
1844 | */ | |
1845 | switch (brdp->brdtype) { | |
1846 | ||
1847 | case BRD_ECH: | |
1848 | brdp->isr = stl_echatintr; | |
1849 | brdp->ioctrl = brdp->ioaddr1 + 1; | |
1850 | brdp->iostatus = brdp->ioaddr1 + 1; | |
1851 | status = inb(brdp->iostatus); | |
3b85b341 JS |
1852 | if ((status & ECH_IDBITMASK) != ECH_ID) { |
1853 | retval = -ENODEV; | |
1854 | goto err; | |
1855 | } | |
1da177e4 LT |
1856 | if ((brdp->irq < 0) || (brdp->irq > 15) || |
1857 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
1858 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
1859 | brdp->irq, brdp->brdnr); | |
3b85b341 JS |
1860 | retval = -EINVAL; |
1861 | goto err; | |
1da177e4 LT |
1862 | } |
1863 | status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1); | |
1864 | status |= (stl_vecmap[brdp->irq] << 1); | |
1865 | outb((status | ECH_BRDRESET), brdp->ioaddr1); | |
1866 | brdp->ioctrlval = ECH_INTENABLE | | |
1867 | ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE); | |
c62429d9 | 1868 | for (i = 0; i < 10; i++) |
1da177e4 LT |
1869 | outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); |
1870 | brdp->iosize1 = 2; | |
1871 | brdp->iosize2 = 32; | |
1872 | name = "serial(EC8/32)"; | |
1873 | outb(status, brdp->ioaddr1); | |
1874 | break; | |
1875 | ||
1876 | case BRD_ECHMC: | |
1877 | brdp->isr = stl_echmcaintr; | |
1878 | brdp->ioctrl = brdp->ioaddr1 + 0x20; | |
1879 | brdp->iostatus = brdp->ioctrl; | |
1880 | status = inb(brdp->iostatus); | |
3b85b341 JS |
1881 | if ((status & ECH_IDBITMASK) != ECH_ID) { |
1882 | retval = -ENODEV; | |
1883 | goto err; | |
1884 | } | |
1da177e4 LT |
1885 | if ((brdp->irq < 0) || (brdp->irq > 15) || |
1886 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
1887 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
1888 | brdp->irq, brdp->brdnr); | |
3b85b341 JS |
1889 | retval = -EINVAL; |
1890 | goto err; | |
1da177e4 LT |
1891 | } |
1892 | outb(ECHMC_BRDRESET, brdp->ioctrl); | |
1893 | outb(ECHMC_INTENABLE, brdp->ioctrl); | |
1894 | brdp->iosize1 = 64; | |
1895 | name = "serial(EC8/32-MC)"; | |
1896 | break; | |
1897 | ||
1898 | case BRD_ECHPCI: | |
1899 | brdp->isr = stl_echpciintr; | |
1900 | brdp->ioctrl = brdp->ioaddr1 + 2; | |
1901 | brdp->iosize1 = 4; | |
1902 | brdp->iosize2 = 8; | |
1903 | name = "serial(EC8/32-PCI)"; | |
1904 | break; | |
1905 | ||
1906 | case BRD_ECH64PCI: | |
1907 | brdp->isr = stl_echpci64intr; | |
1908 | brdp->ioctrl = brdp->ioaddr2 + 0x40; | |
1909 | outb(0x43, (brdp->ioaddr1 + 0x4c)); | |
1910 | brdp->iosize1 = 0x80; | |
1911 | brdp->iosize2 = 0x80; | |
1912 | name = "serial(EC8/64-PCI)"; | |
1913 | break; | |
1914 | ||
1915 | default: | |
1916 | printk("STALLION: unknown board type=%d\n", brdp->brdtype); | |
3b85b341 JS |
1917 | retval = -EINVAL; |
1918 | goto err; | |
1da177e4 LT |
1919 | } |
1920 | ||
1921 | /* | |
1922 | * Check boards for possible IO address conflicts and return fail status | |
1923 | * if an IO conflict found. | |
1924 | */ | |
3b85b341 | 1925 | retval = -EBUSY; |
1da177e4 LT |
1926 | if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { |
1927 | printk(KERN_WARNING "STALLION: Warning, board %d I/O address " | |
1928 | "%x conflicts with another device\n", brdp->brdnr, | |
1929 | brdp->ioaddr1); | |
3b85b341 | 1930 | goto err; |
1da177e4 LT |
1931 | } |
1932 | ||
1933 | if (brdp->iosize2 > 0) | |
1934 | if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { | |
1935 | printk(KERN_WARNING "STALLION: Warning, board %d I/O " | |
1936 | "address %x conflicts with another device\n", | |
1937 | brdp->brdnr, brdp->ioaddr2); | |
1938 | printk(KERN_WARNING "STALLION: Warning, also " | |
1939 | "releasing board %d I/O address %x \n", | |
1940 | brdp->brdnr, brdp->ioaddr1); | |
3b85b341 | 1941 | goto err_rel1; |
1da177e4 LT |
1942 | } |
1943 | ||
1944 | /* | |
1945 | * Scan through the secondary io address space looking for panels. | |
1946 | * As we find'em allocate and initialize panel structures for each. | |
1947 | */ | |
1948 | brdp->clk = CD1400_CLK; | |
1949 | brdp->hwid = status; | |
1950 | ||
1951 | ioaddr = brdp->ioaddr2; | |
1952 | banknr = 0; | |
1953 | panelnr = 0; | |
1954 | nxtid = 0; | |
1955 | ||
c62429d9 | 1956 | for (i = 0; i < STL_MAXPANELS; i++) { |
1da177e4 LT |
1957 | if (brdp->brdtype == BRD_ECHPCI) { |
1958 | outb(nxtid, brdp->ioctrl); | |
1959 | ioaddr = brdp->ioaddr2; | |
1960 | } | |
1961 | status = inb(ioaddr + ECH_PNLSTATUS); | |
1962 | if ((status & ECH_PNLIDMASK) != nxtid) | |
64834b22 | 1963 | break; |
ca7ed0f2 | 1964 | panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); |
b0b4ed72 | 1965 | if (!panelp) { |
1da177e4 | 1966 | printk("STALLION: failed to allocate memory " |
ca7ed0f2 | 1967 | "(size=%Zd)\n", sizeof(struct stlpanel)); |
49277b1c | 1968 | retval = -ENOMEM; |
3b85b341 | 1969 | goto err_fr; |
1da177e4 | 1970 | } |
1da177e4 LT |
1971 | panelp->magic = STL_PANELMAGIC; |
1972 | panelp->brdnr = brdp->brdnr; | |
1973 | panelp->panelnr = panelnr; | |
1974 | panelp->iobase = ioaddr; | |
1975 | panelp->pagenr = nxtid; | |
1976 | panelp->hwid = status; | |
1977 | brdp->bnk2panel[banknr] = panelp; | |
1978 | brdp->bnkpageaddr[banknr] = nxtid; | |
1979 | brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS; | |
1980 | ||
1981 | if (status & ECH_PNLXPID) { | |
615e4a71 | 1982 | panelp->uartp = &stl_sc26198uart; |
1da177e4 LT |
1983 | panelp->isr = stl_sc26198intr; |
1984 | if (status & ECH_PNL16PORT) { | |
1985 | panelp->nrports = 16; | |
1986 | brdp->bnk2panel[banknr] = panelp; | |
1987 | brdp->bnkpageaddr[banknr] = nxtid; | |
1988 | brdp->bnkstataddr[banknr++] = ioaddr + 4 + | |
1989 | ECH_PNLSTATUS; | |
c62429d9 | 1990 | } else |
1da177e4 | 1991 | panelp->nrports = 8; |
1da177e4 | 1992 | } else { |
615e4a71 | 1993 | panelp->uartp = &stl_cd1400uart; |
1da177e4 LT |
1994 | panelp->isr = stl_cd1400echintr; |
1995 | if (status & ECH_PNL16PORT) { | |
1996 | panelp->nrports = 16; | |
1997 | panelp->ackmask = 0x80; | |
1998 | if (brdp->brdtype != BRD_ECHPCI) | |
1999 | ioaddr += EREG_BANKSIZE; | |
2000 | brdp->bnk2panel[banknr] = panelp; | |
2001 | brdp->bnkpageaddr[banknr] = ++nxtid; | |
2002 | brdp->bnkstataddr[banknr++] = ioaddr + | |
2003 | ECH_PNLSTATUS; | |
2004 | } else { | |
2005 | panelp->nrports = 8; | |
2006 | panelp->ackmask = 0xc0; | |
2007 | } | |
2008 | } | |
2009 | ||
2010 | nxtid++; | |
2011 | ioaddr += EREG_BANKSIZE; | |
2012 | brdp->nrports += panelp->nrports; | |
2013 | brdp->panels[panelnr++] = panelp; | |
2014 | if ((brdp->brdtype != BRD_ECHPCI) && | |
49277b1c JS |
2015 | (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) { |
2016 | retval = -EINVAL; | |
3b85b341 | 2017 | goto err_fr; |
49277b1c | 2018 | } |
1da177e4 LT |
2019 | } |
2020 | ||
2021 | brdp->nrpanels = panelnr; | |
2022 | brdp->nrbnks = banknr; | |
2023 | if (brdp->brdtype == BRD_ECH) | |
2024 | outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); | |
2025 | ||
2026 | brdp->state |= BRD_FOUND; | |
0f2ed4c6 | 2027 | if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { |
1da177e4 LT |
2028 | printk("STALLION: failed to register interrupt " |
2029 | "routine for %s irq=%d\n", name, brdp->irq); | |
3b85b341 JS |
2030 | retval = -ENODEV; |
2031 | goto err_fr; | |
1da177e4 LT |
2032 | } |
2033 | ||
3b85b341 JS |
2034 | return 0; |
2035 | err_fr: | |
2036 | stl_cleanup_panels(brdp); | |
2037 | if (brdp->iosize2 > 0) | |
2038 | release_region(brdp->ioaddr2, brdp->iosize2); | |
2039 | err_rel1: | |
2040 | release_region(brdp->ioaddr1, brdp->iosize1); | |
2041 | err: | |
2042 | return retval; | |
1da177e4 LT |
2043 | } |
2044 | ||
2045 | /*****************************************************************************/ | |
2046 | ||
2047 | /* | |
2048 | * Initialize and configure the specified board. | |
2049 | * Scan through all the boards in the configuration and see what we | |
2050 | * can find. Handle EIO and the ECH boards a little differently here | |
2051 | * since the initial search and setup is very different. | |
2052 | */ | |
2053 | ||
705c1862 | 2054 | static int __devinit stl_brdinit(struct stlbrd *brdp) |
1da177e4 | 2055 | { |
3b85b341 | 2056 | int i, retval; |
1da177e4 | 2057 | |
a0564e14 | 2058 | pr_debug("stl_brdinit(brdp=%p)\n", brdp); |
1da177e4 LT |
2059 | |
2060 | switch (brdp->brdtype) { | |
2061 | case BRD_EASYIO: | |
2062 | case BRD_EASYIOPCI: | |
3b85b341 JS |
2063 | retval = stl_initeio(brdp); |
2064 | if (retval) | |
2065 | goto err; | |
1da177e4 LT |
2066 | break; |
2067 | case BRD_ECH: | |
2068 | case BRD_ECHMC: | |
2069 | case BRD_ECHPCI: | |
2070 | case BRD_ECH64PCI: | |
3b85b341 JS |
2071 | retval = stl_initech(brdp); |
2072 | if (retval) | |
2073 | goto err; | |
1da177e4 LT |
2074 | break; |
2075 | default: | |
2076 | printk("STALLION: board=%d is unknown board type=%d\n", | |
2077 | brdp->brdnr, brdp->brdtype); | |
3b85b341 JS |
2078 | retval = -ENODEV; |
2079 | goto err; | |
1da177e4 LT |
2080 | } |
2081 | ||
1da177e4 LT |
2082 | if ((brdp->state & BRD_FOUND) == 0) { |
2083 | printk("STALLION: %s board not found, board=%d io=%x irq=%d\n", | |
2084 | stl_brdnames[brdp->brdtype], brdp->brdnr, | |
2085 | brdp->ioaddr1, brdp->irq); | |
3b85b341 | 2086 | goto err_free; |
1da177e4 LT |
2087 | } |
2088 | ||
c62429d9 | 2089 | for (i = 0; i < STL_MAXPANELS; i++) |
615e4a71 | 2090 | if (brdp->panels[i] != NULL) |
1da177e4 LT |
2091 | stl_initports(brdp, brdp->panels[i]); |
2092 | ||
2093 | printk("STALLION: %s found, board=%d io=%x irq=%d " | |
2094 | "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype], | |
2095 | brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels, | |
2096 | brdp->nrports); | |
3b85b341 JS |
2097 | |
2098 | return 0; | |
2099 | err_free: | |
2100 | free_irq(brdp->irq, brdp); | |
2101 | ||
2102 | stl_cleanup_panels(brdp); | |
2103 | ||
2104 | release_region(brdp->ioaddr1, brdp->iosize1); | |
2105 | if (brdp->iosize2 > 0) | |
2106 | release_region(brdp->ioaddr2, brdp->iosize2); | |
3b85b341 JS |
2107 | err: |
2108 | return retval; | |
1da177e4 LT |
2109 | } |
2110 | ||
2111 | /*****************************************************************************/ | |
2112 | ||
2113 | /* | |
2114 | * Find the next available board number that is free. | |
2115 | */ | |
2116 | ||
705c1862 | 2117 | static int __devinit stl_getbrdnr(void) |
1da177e4 | 2118 | { |
6b2c9457 | 2119 | unsigned int i; |
1da177e4 | 2120 | |
c62429d9 | 2121 | for (i = 0; i < STL_MAXBRDS; i++) |
615e4a71 | 2122 | if (stl_brds[i] == NULL) { |
1da177e4 LT |
2123 | if (i >= stl_nrbrds) |
2124 | stl_nrbrds = i + 1; | |
c62429d9 | 2125 | return i; |
1da177e4 | 2126 | } |
c62429d9 JS |
2127 | |
2128 | return -1; | |
1da177e4 LT |
2129 | } |
2130 | ||
b1b84fe0 | 2131 | /*****************************************************************************/ |
1da177e4 LT |
2132 | /* |
2133 | * We have a Stallion board. Allocate a board structure and | |
2134 | * initialize it. Read its IO and IRQ resources from PCI | |
2135 | * configuration space. | |
2136 | */ | |
2137 | ||
b1b84fe0 JS |
2138 | static int __devinit stl_pciprobe(struct pci_dev *pdev, |
2139 | const struct pci_device_id *ent) | |
1da177e4 | 2140 | { |
b1b84fe0 | 2141 | struct stlbrd *brdp; |
aeaccfe4 | 2142 | unsigned int i, brdtype = ent->driver_data; |
6b2c9457 | 2143 | int brdnr, retval = -ENODEV; |
1da177e4 | 2144 | |
b1b84fe0 | 2145 | if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) |
3b85b341 | 2146 | goto err; |
b1b84fe0 | 2147 | |
3b85b341 JS |
2148 | retval = pci_enable_device(pdev); |
2149 | if (retval) | |
2150 | goto err; | |
2151 | brdp = stl_allocbrd(); | |
2152 | if (brdp == NULL) { | |
2153 | retval = -ENOMEM; | |
2154 | goto err; | |
2155 | } | |
79cfe7ab | 2156 | mutex_lock(&stl_brdslock); |
6b2c9457 JS |
2157 | brdnr = stl_getbrdnr(); |
2158 | if (brdnr < 0) { | |
fefaf9a7 | 2159 | dev_err(&pdev->dev, "too many boards found, " |
1da177e4 | 2160 | "maximum supported %d\n", STL_MAXBRDS); |
79cfe7ab | 2161 | mutex_unlock(&stl_brdslock); |
49277b1c | 2162 | retval = -ENODEV; |
3b85b341 | 2163 | goto err_fr; |
1da177e4 | 2164 | } |
6b2c9457 | 2165 | brdp->brdnr = (unsigned int)brdnr; |
79cfe7ab JS |
2166 | stl_brds[brdp->brdnr] = brdp; |
2167 | mutex_unlock(&stl_brdslock); | |
2168 | ||
1da177e4 | 2169 | brdp->brdtype = brdtype; |
fc06b5cf | 2170 | brdp->state |= STL_PROBED; |
1da177e4 | 2171 | |
1da177e4 LT |
2172 | /* |
2173 | * We have all resources from the board, so let's setup the actual | |
2174 | * board structure now. | |
2175 | */ | |
2176 | switch (brdtype) { | |
2177 | case BRD_ECHPCI: | |
b1b84fe0 JS |
2178 | brdp->ioaddr2 = pci_resource_start(pdev, 0); |
2179 | brdp->ioaddr1 = pci_resource_start(pdev, 1); | |
1da177e4 LT |
2180 | break; |
2181 | case BRD_ECH64PCI: | |
b1b84fe0 JS |
2182 | brdp->ioaddr2 = pci_resource_start(pdev, 2); |
2183 | brdp->ioaddr1 = pci_resource_start(pdev, 1); | |
1da177e4 LT |
2184 | break; |
2185 | case BRD_EASYIOPCI: | |
b1b84fe0 JS |
2186 | brdp->ioaddr1 = pci_resource_start(pdev, 2); |
2187 | brdp->ioaddr2 = pci_resource_start(pdev, 1); | |
1da177e4 LT |
2188 | break; |
2189 | default: | |
fefaf9a7 | 2190 | dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype); |
1da177e4 LT |
2191 | break; |
2192 | } | |
2193 | ||
b1b84fe0 | 2194 | brdp->irq = pdev->irq; |
3b85b341 JS |
2195 | retval = stl_brdinit(brdp); |
2196 | if (retval) | |
79cfe7ab | 2197 | goto err_null; |
1da177e4 | 2198 | |
b1b84fe0 JS |
2199 | pci_set_drvdata(pdev, brdp); |
2200 | ||
aeaccfe4 JS |
2201 | for (i = 0; i < brdp->nrports; i++) |
2202 | tty_register_device(stl_serial, | |
2203 | brdp->brdnr * STL_MAXPORTS + i, &pdev->dev); | |
2204 | ||
3b85b341 | 2205 | return 0; |
79cfe7ab JS |
2206 | err_null: |
2207 | stl_brds[brdp->brdnr] = NULL; | |
3b85b341 JS |
2208 | err_fr: |
2209 | kfree(brdp); | |
2210 | err: | |
2211 | return retval; | |
1da177e4 LT |
2212 | } |
2213 | ||
b1b84fe0 | 2214 | static void __devexit stl_pciremove(struct pci_dev *pdev) |
1da177e4 | 2215 | { |
b1b84fe0 | 2216 | struct stlbrd *brdp = pci_get_drvdata(pdev); |
aeaccfe4 | 2217 | unsigned int i; |
1da177e4 | 2218 | |
b1b84fe0 | 2219 | free_irq(brdp->irq, brdp); |
1da177e4 | 2220 | |
b1b84fe0 | 2221 | stl_cleanup_panels(brdp); |
1da177e4 | 2222 | |
b1b84fe0 JS |
2223 | release_region(brdp->ioaddr1, brdp->iosize1); |
2224 | if (brdp->iosize2 > 0) | |
2225 | release_region(brdp->ioaddr2, brdp->iosize2); | |
1da177e4 | 2226 | |
aeaccfe4 JS |
2227 | for (i = 0; i < brdp->nrports; i++) |
2228 | tty_unregister_device(stl_serial, | |
2229 | brdp->brdnr * STL_MAXPORTS + i); | |
2230 | ||
b1b84fe0 JS |
2231 | stl_brds[brdp->brdnr] = NULL; |
2232 | kfree(brdp); | |
1da177e4 LT |
2233 | } |
2234 | ||
b1b84fe0 JS |
2235 | static struct pci_driver stl_pcidriver = { |
2236 | .name = "stallion", | |
2237 | .id_table = stl_pcibrds, | |
2238 | .probe = stl_pciprobe, | |
2239 | .remove = __devexit_p(stl_pciremove) | |
2240 | }; | |
1da177e4 LT |
2241 | |
2242 | /*****************************************************************************/ | |
2243 | ||
1da177e4 LT |
2244 | /* |
2245 | * Return the board stats structure to user app. | |
2246 | */ | |
2247 | ||
2248 | static int stl_getbrdstats(combrd_t __user *bp) | |
2249 | { | |
6b2c9457 | 2250 | combrd_t stl_brdstats; |
ca7ed0f2 JS |
2251 | struct stlbrd *brdp; |
2252 | struct stlpanel *panelp; | |
6b2c9457 | 2253 | unsigned int i; |
1da177e4 LT |
2254 | |
2255 | if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t))) | |
2256 | return -EFAULT; | |
2257 | if (stl_brdstats.brd >= STL_MAXBRDS) | |
c62429d9 | 2258 | return -ENODEV; |
1da177e4 | 2259 | brdp = stl_brds[stl_brdstats.brd]; |
615e4a71 | 2260 | if (brdp == NULL) |
c62429d9 | 2261 | return -ENODEV; |
1da177e4 LT |
2262 | |
2263 | memset(&stl_brdstats, 0, sizeof(combrd_t)); | |
2264 | stl_brdstats.brd = brdp->brdnr; | |
2265 | stl_brdstats.type = brdp->brdtype; | |
2266 | stl_brdstats.hwid = brdp->hwid; | |
2267 | stl_brdstats.state = brdp->state; | |
2268 | stl_brdstats.ioaddr = brdp->ioaddr1; | |
2269 | stl_brdstats.ioaddr2 = brdp->ioaddr2; | |
2270 | stl_brdstats.irq = brdp->irq; | |
2271 | stl_brdstats.nrpanels = brdp->nrpanels; | |
2272 | stl_brdstats.nrports = brdp->nrports; | |
c62429d9 | 2273 | for (i = 0; i < brdp->nrpanels; i++) { |
1da177e4 LT |
2274 | panelp = brdp->panels[i]; |
2275 | stl_brdstats.panels[i].panel = i; | |
2276 | stl_brdstats.panels[i].hwid = panelp->hwid; | |
2277 | stl_brdstats.panels[i].nrports = panelp->nrports; | |
2278 | } | |
2279 | ||
2280 | return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0; | |
2281 | } | |
2282 | ||
2283 | /*****************************************************************************/ | |
2284 | ||
2285 | /* | |
2286 | * Resolve the referenced port number into a port struct pointer. | |
2287 | */ | |
2288 | ||
ca7ed0f2 | 2289 | static struct stlport *stl_getport(int brdnr, int panelnr, int portnr) |
1da177e4 | 2290 | { |
ca7ed0f2 JS |
2291 | struct stlbrd *brdp; |
2292 | struct stlpanel *panelp; | |
1da177e4 | 2293 | |
c62429d9 JS |
2294 | if (brdnr < 0 || brdnr >= STL_MAXBRDS) |
2295 | return NULL; | |
1da177e4 | 2296 | brdp = stl_brds[brdnr]; |
615e4a71 | 2297 | if (brdp == NULL) |
c62429d9 | 2298 | return NULL; |
6b2c9457 | 2299 | if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels) |
c62429d9 | 2300 | return NULL; |
1da177e4 | 2301 | panelp = brdp->panels[panelnr]; |
615e4a71 | 2302 | if (panelp == NULL) |
c62429d9 | 2303 | return NULL; |
6b2c9457 | 2304 | if (portnr < 0 || (unsigned int)portnr >= panelp->nrports) |
c62429d9 JS |
2305 | return NULL; |
2306 | return panelp->ports[portnr]; | |
1da177e4 LT |
2307 | } |
2308 | ||
2309 | /*****************************************************************************/ | |
2310 | ||
2311 | /* | |
2312 | * Return the port stats structure to user app. A NULL port struct | |
2313 | * pointer passed in means that we need to find out from the app | |
2314 | * what port to get stats for (used through board control device). | |
2315 | */ | |
2316 | ||
d18a750f | 2317 | static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp) |
1da177e4 | 2318 | { |
6b2c9457 | 2319 | comstats_t stl_comstats; |
1da177e4 LT |
2320 | unsigned char *head, *tail; |
2321 | unsigned long flags; | |
2322 | ||
2323 | if (!portp) { | |
2324 | if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) | |
2325 | return -EFAULT; | |
2326 | portp = stl_getport(stl_comstats.brd, stl_comstats.panel, | |
2327 | stl_comstats.port); | |
615e4a71 | 2328 | if (portp == NULL) |
c62429d9 | 2329 | return -ENODEV; |
1da177e4 LT |
2330 | } |
2331 | ||
b4eda9cb | 2332 | mutex_lock(&portp->port.mutex); |
1da177e4 | 2333 | portp->stats.state = portp->istate; |
f8ae4764 | 2334 | portp->stats.flags = portp->port.flags; |
1da177e4 LT |
2335 | portp->stats.hwid = portp->hwid; |
2336 | ||
2337 | portp->stats.ttystate = 0; | |
2338 | portp->stats.cflags = 0; | |
2339 | portp->stats.iflags = 0; | |
2340 | portp->stats.oflags = 0; | |
2341 | portp->stats.lflags = 0; | |
2342 | portp->stats.rxbuffered = 0; | |
2343 | ||
b65b5b59 | 2344 | spin_lock_irqsave(&stallion_lock, flags); |
d18a750f AC |
2345 | if (tty != NULL && portp->port.tty == tty) { |
2346 | portp->stats.ttystate = tty->flags; | |
2347 | /* No longer available as a statistic */ | |
2348 | portp->stats.rxbuffered = 1; /*tty->flip.count; */ | |
2349 | if (tty->termios != NULL) { | |
2350 | portp->stats.cflags = tty->termios->c_cflag; | |
2351 | portp->stats.iflags = tty->termios->c_iflag; | |
2352 | portp->stats.oflags = tty->termios->c_oflag; | |
2353 | portp->stats.lflags = tty->termios->c_lflag; | |
1da177e4 | 2354 | } |
d18a750f | 2355 | } |
b65b5b59 | 2356 | spin_unlock_irqrestore(&stallion_lock, flags); |
1da177e4 LT |
2357 | |
2358 | head = portp->tx.head; | |
2359 | tail = portp->tx.tail; | |
c62429d9 JS |
2360 | portp->stats.txbuffered = (head >= tail) ? (head - tail) : |
2361 | (STL_TXBUFSIZE - (tail - head)); | |
1da177e4 LT |
2362 | |
2363 | portp->stats.signals = (unsigned long) stl_getsignals(portp); | |
b4eda9cb | 2364 | mutex_unlock(&portp->port.mutex); |
1da177e4 LT |
2365 | |
2366 | return copy_to_user(cp, &portp->stats, | |
2367 | sizeof(comstats_t)) ? -EFAULT : 0; | |
2368 | } | |
2369 | ||
2370 | /*****************************************************************************/ | |
2371 | ||
2372 | /* | |
2373 | * Clear the port stats structure. We also return it zeroed out... | |
2374 | */ | |
2375 | ||
ca7ed0f2 | 2376 | static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) |
1da177e4 | 2377 | { |
6b2c9457 JS |
2378 | comstats_t stl_comstats; |
2379 | ||
1da177e4 LT |
2380 | if (!portp) { |
2381 | if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) | |
2382 | return -EFAULT; | |
2383 | portp = stl_getport(stl_comstats.brd, stl_comstats.panel, | |
2384 | stl_comstats.port); | |
615e4a71 | 2385 | if (portp == NULL) |
c62429d9 | 2386 | return -ENODEV; |
1da177e4 LT |
2387 | } |
2388 | ||
b4eda9cb | 2389 | mutex_lock(&portp->port.mutex); |
1da177e4 LT |
2390 | memset(&portp->stats, 0, sizeof(comstats_t)); |
2391 | portp->stats.brd = portp->brdnr; | |
2392 | portp->stats.panel = portp->panelnr; | |
2393 | portp->stats.port = portp->portnr; | |
b4eda9cb | 2394 | mutex_unlock(&portp->port.mutex); |
1da177e4 LT |
2395 | return copy_to_user(cp, &portp->stats, |
2396 | sizeof(comstats_t)) ? -EFAULT : 0; | |
2397 | } | |
2398 | ||
2399 | /*****************************************************************************/ | |
2400 | ||
2401 | /* | |
2402 | * Return the entire driver ports structure to a user app. | |
2403 | */ | |
2404 | ||
ca7ed0f2 | 2405 | static int stl_getportstruct(struct stlport __user *arg) |
1da177e4 | 2406 | { |
6b2c9457 | 2407 | struct stlport stl_dummyport; |
ca7ed0f2 | 2408 | struct stlport *portp; |
1da177e4 | 2409 | |
ca7ed0f2 | 2410 | if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport))) |
1da177e4 LT |
2411 | return -EFAULT; |
2412 | portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr, | |
2413 | stl_dummyport.portnr); | |
2414 | if (!portp) | |
2415 | return -ENODEV; | |
ca7ed0f2 | 2416 | return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0; |
1da177e4 LT |
2417 | } |
2418 | ||
2419 | /*****************************************************************************/ | |
2420 | ||
2421 | /* | |
2422 | * Return the entire driver board structure to a user app. | |
2423 | */ | |
2424 | ||
ca7ed0f2 | 2425 | static int stl_getbrdstruct(struct stlbrd __user *arg) |
1da177e4 | 2426 | { |
6b2c9457 | 2427 | struct stlbrd stl_dummybrd; |
ca7ed0f2 | 2428 | struct stlbrd *brdp; |
1da177e4 | 2429 | |
ca7ed0f2 | 2430 | if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd))) |
1da177e4 | 2431 | return -EFAULT; |
6b2c9457 | 2432 | if (stl_dummybrd.brdnr >= STL_MAXBRDS) |
1da177e4 LT |
2433 | return -ENODEV; |
2434 | brdp = stl_brds[stl_dummybrd.brdnr]; | |
2435 | if (!brdp) | |
c62429d9 | 2436 | return -ENODEV; |
ca7ed0f2 | 2437 | return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0; |
1da177e4 LT |
2438 | } |
2439 | ||
2440 | /*****************************************************************************/ | |
2441 | ||
2442 | /* | |
2443 | * The "staliomem" device is also required to do some special operations | |
2444 | * on the board and/or ports. In this driver it is mostly used for stats | |
2445 | * collection. | |
2446 | */ | |
2447 | ||
894cb917 | 2448 | static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) |
1da177e4 LT |
2449 | { |
2450 | int brdnr, rc; | |
2451 | void __user *argp = (void __user *)arg; | |
2452 | ||
894cb917 | 2453 | pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg); |
1da177e4 | 2454 | |
894cb917 | 2455 | brdnr = iminor(fp->f_dentry->d_inode); |
1da177e4 | 2456 | if (brdnr >= STL_MAXBRDS) |
c62429d9 | 2457 | return -ENODEV; |
1da177e4 LT |
2458 | rc = 0; |
2459 | ||
2460 | switch (cmd) { | |
2461 | case COM_GETPORTSTATS: | |
d18a750f | 2462 | rc = stl_getportstats(NULL, NULL, argp); |
1da177e4 LT |
2463 | break; |
2464 | case COM_CLRPORTSTATS: | |
2465 | rc = stl_clrportstats(NULL, argp); | |
2466 | break; | |
2467 | case COM_GETBRDSTATS: | |
2468 | rc = stl_getbrdstats(argp); | |
2469 | break; | |
2470 | case COM_READPORT: | |
2471 | rc = stl_getportstruct(argp); | |
2472 | break; | |
2473 | case COM_READBOARD: | |
2474 | rc = stl_getbrdstruct(argp); | |
2475 | break; | |
2476 | default: | |
2477 | rc = -ENOIOCTLCMD; | |
2478 | break; | |
2479 | } | |
c62429d9 | 2480 | return rc; |
1da177e4 LT |
2481 | } |
2482 | ||
b68e31d0 | 2483 | static const struct tty_operations stl_ops = { |
1da177e4 LT |
2484 | .open = stl_open, |
2485 | .close = stl_close, | |
2486 | .write = stl_write, | |
2487 | .put_char = stl_putchar, | |
2488 | .flush_chars = stl_flushchars, | |
2489 | .write_room = stl_writeroom, | |
2490 | .chars_in_buffer = stl_charsinbuffer, | |
2491 | .ioctl = stl_ioctl, | |
2492 | .set_termios = stl_settermios, | |
2493 | .throttle = stl_throttle, | |
2494 | .unthrottle = stl_unthrottle, | |
2495 | .stop = stl_stop, | |
2496 | .start = stl_start, | |
2497 | .hangup = stl_hangup, | |
2498 | .flush_buffer = stl_flushbuffer, | |
2499 | .break_ctl = stl_breakctl, | |
2500 | .wait_until_sent = stl_waituntilsent, | |
2501 | .send_xchar = stl_sendxchar, | |
1da177e4 LT |
2502 | .tiocmget = stl_tiocmget, |
2503 | .tiocmset = stl_tiocmset, | |
8561c44c | 2504 | .proc_fops = &stl_proc_fops, |
1da177e4 LT |
2505 | }; |
2506 | ||
31f35939 AC |
2507 | static const struct tty_port_operations stl_port_ops = { |
2508 | .carrier_raised = stl_carrier_raised, | |
fcc8ac18 | 2509 | .dtr_rts = stl_dtr_rts, |
047e9658 AC |
2510 | .activate = stl_activate, |
2511 | .shutdown = stl_shutdown, | |
31f35939 AC |
2512 | }; |
2513 | ||
1da177e4 LT |
2514 | /*****************************************************************************/ |
2515 | /* CD1400 HARDWARE FUNCTIONS */ | |
2516 | /*****************************************************************************/ | |
2517 | ||
2518 | /* | |
2519 | * These functions get/set/update the registers of the cd1400 UARTs. | |
2520 | * Access to the cd1400 registers is via an address/data io port pair. | |
2521 | * (Maybe should make this inline...) | |
2522 | */ | |
2523 | ||
ca7ed0f2 | 2524 | static int stl_cd1400getreg(struct stlport *portp, int regnr) |
1da177e4 LT |
2525 | { |
2526 | outb((regnr + portp->uartaddr), portp->ioaddr); | |
014c2544 | 2527 | return inb(portp->ioaddr + EREG_DATA); |
1da177e4 LT |
2528 | } |
2529 | ||
ca7ed0f2 | 2530 | static void stl_cd1400setreg(struct stlport *portp, int regnr, int value) |
1da177e4 | 2531 | { |
c62429d9 | 2532 | outb(regnr + portp->uartaddr, portp->ioaddr); |
1da177e4 LT |
2533 | outb(value, portp->ioaddr + EREG_DATA); |
2534 | } | |
2535 | ||
ca7ed0f2 | 2536 | static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value) |
1da177e4 | 2537 | { |
c62429d9 | 2538 | outb(regnr + portp->uartaddr, portp->ioaddr); |
1da177e4 LT |
2539 | if (inb(portp->ioaddr + EREG_DATA) != value) { |
2540 | outb(value, portp->ioaddr + EREG_DATA); | |
014c2544 | 2541 | return 1; |
1da177e4 | 2542 | } |
014c2544 | 2543 | return 0; |
1da177e4 LT |
2544 | } |
2545 | ||
2546 | /*****************************************************************************/ | |
2547 | ||
2548 | /* | |
2549 | * Inbitialize the UARTs in a panel. We don't care what sort of board | |
2550 | * these ports are on - since the port io registers are almost | |
2551 | * identical when dealing with ports. | |
2552 | */ | |
2553 | ||
ca7ed0f2 | 2554 | static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp) |
1da177e4 LT |
2555 | { |
2556 | unsigned int gfrcr; | |
2557 | int chipmask, i, j; | |
2558 | int nrchips, uartaddr, ioaddr; | |
b65b5b59 | 2559 | unsigned long flags; |
1da177e4 | 2560 | |
a0564e14 | 2561 | pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); |
1da177e4 | 2562 | |
b65b5b59 | 2563 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2564 | BRDENABLE(panelp->brdnr, panelp->pagenr); |
2565 | ||
2566 | /* | |
2567 | * Check that each chip is present and started up OK. | |
2568 | */ | |
2569 | chipmask = 0; | |
2570 | nrchips = panelp->nrports / CD1400_PORTS; | |
c62429d9 | 2571 | for (i = 0; i < nrchips; i++) { |
1da177e4 LT |
2572 | if (brdp->brdtype == BRD_ECHPCI) { |
2573 | outb((panelp->pagenr + (i >> 1)), brdp->ioctrl); | |
2574 | ioaddr = panelp->iobase; | |
c62429d9 | 2575 | } else |
1da177e4 | 2576 | ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1)); |
1da177e4 LT |
2577 | uartaddr = (i & 0x01) ? 0x080 : 0; |
2578 | outb((GFRCR + uartaddr), ioaddr); | |
2579 | outb(0, (ioaddr + EREG_DATA)); | |
2580 | outb((CCR + uartaddr), ioaddr); | |
2581 | outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); | |
2582 | outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); | |
2583 | outb((GFRCR + uartaddr), ioaddr); | |
c62429d9 | 2584 | for (j = 0; j < CCR_MAXWAIT; j++) |
1da177e4 LT |
2585 | if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0) |
2586 | break; | |
c62429d9 | 2587 | |
1da177e4 LT |
2588 | if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) { |
2589 | printk("STALLION: cd1400 not responding, " | |
2590 | "brd=%d panel=%d chip=%d\n", | |
2591 | panelp->brdnr, panelp->panelnr, i); | |
2592 | continue; | |
2593 | } | |
2594 | chipmask |= (0x1 << i); | |
2595 | outb((PPR + uartaddr), ioaddr); | |
2596 | outb(PPR_SCALAR, (ioaddr + EREG_DATA)); | |
2597 | } | |
2598 | ||
2599 | BRDDISABLE(panelp->brdnr); | |
b65b5b59 | 2600 | spin_unlock_irqrestore(&brd_lock, flags); |
014c2544 | 2601 | return chipmask; |
1da177e4 LT |
2602 | } |
2603 | ||
2604 | /*****************************************************************************/ | |
2605 | ||
2606 | /* | |
2607 | * Initialize hardware specific port registers. | |
2608 | */ | |
2609 | ||
ca7ed0f2 | 2610 | static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) |
1da177e4 | 2611 | { |
b65b5b59 | 2612 | unsigned long flags; |
a0564e14 JS |
2613 | pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, |
2614 | panelp, portp); | |
1da177e4 | 2615 | |
615e4a71 JS |
2616 | if ((brdp == NULL) || (panelp == NULL) || |
2617 | (portp == NULL)) | |
1da177e4 LT |
2618 | return; |
2619 | ||
b65b5b59 | 2620 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2621 | portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) || |
2622 | (portp->portnr < 8)) ? 0 : EREG_BANKSIZE); | |
2623 | portp->uartaddr = (portp->portnr & 0x04) << 5; | |
2624 | portp->pagenr = panelp->pagenr + (portp->portnr >> 3); | |
2625 | ||
2626 | BRDENABLE(portp->brdnr, portp->pagenr); | |
2627 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
2628 | stl_cd1400setreg(portp, LIVR, (portp->portnr << 3)); | |
2629 | portp->hwid = stl_cd1400getreg(portp, GFRCR); | |
2630 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 2631 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
2632 | } |
2633 | ||
2634 | /*****************************************************************************/ | |
2635 | ||
2636 | /* | |
2637 | * Wait for the command register to be ready. We will poll this, | |
2638 | * since it won't usually take too long to be ready. | |
2639 | */ | |
2640 | ||
ca7ed0f2 | 2641 | static void stl_cd1400ccrwait(struct stlport *portp) |
1da177e4 LT |
2642 | { |
2643 | int i; | |
2644 | ||
c62429d9 JS |
2645 | for (i = 0; i < CCR_MAXWAIT; i++) |
2646 | if (stl_cd1400getreg(portp, CCR) == 0) | |
1da177e4 | 2647 | return; |
1da177e4 LT |
2648 | |
2649 | printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n", | |
2650 | portp->portnr, portp->panelnr, portp->brdnr); | |
2651 | } | |
2652 | ||
2653 | /*****************************************************************************/ | |
2654 | ||
2655 | /* | |
2656 | * Set up the cd1400 registers for a port based on the termios port | |
2657 | * settings. | |
2658 | */ | |
2659 | ||
606d099c | 2660 | static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp) |
1da177e4 | 2661 | { |
ca7ed0f2 | 2662 | struct stlbrd *brdp; |
1da177e4 LT |
2663 | unsigned long flags; |
2664 | unsigned int clkdiv, baudrate; | |
2665 | unsigned char cor1, cor2, cor3; | |
2666 | unsigned char cor4, cor5, ccr; | |
2667 | unsigned char srer, sreron, sreroff; | |
2668 | unsigned char mcor1, mcor2, rtpr; | |
2669 | unsigned char clk, div; | |
2670 | ||
2671 | cor1 = 0; | |
2672 | cor2 = 0; | |
2673 | cor3 = 0; | |
2674 | cor4 = 0; | |
2675 | cor5 = 0; | |
2676 | ccr = 0; | |
2677 | rtpr = 0; | |
2678 | clk = 0; | |
2679 | div = 0; | |
2680 | mcor1 = 0; | |
2681 | mcor2 = 0; | |
2682 | sreron = 0; | |
2683 | sreroff = 0; | |
2684 | ||
2685 | brdp = stl_brds[portp->brdnr]; | |
615e4a71 | 2686 | if (brdp == NULL) |
1da177e4 LT |
2687 | return; |
2688 | ||
2689 | /* | |
2690 | * Set up the RX char ignore mask with those RX error types we | |
2691 | * can ignore. We can get the cd1400 to help us out a little here, | |
2692 | * it will ignore parity errors and breaks for us. | |
2693 | */ | |
2694 | portp->rxignoremsk = 0; | |
2695 | if (tiosp->c_iflag & IGNPAR) { | |
2696 | portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN); | |
2697 | cor1 |= COR1_PARIGNORE; | |
2698 | } | |
2699 | if (tiosp->c_iflag & IGNBRK) { | |
2700 | portp->rxignoremsk |= ST_BREAK; | |
2701 | cor4 |= COR4_IGNBRK; | |
2702 | } | |
2703 | ||
2704 | portp->rxmarkmsk = ST_OVERRUN; | |
2705 | if (tiosp->c_iflag & (INPCK | PARMRK)) | |
2706 | portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING); | |
2707 | if (tiosp->c_iflag & BRKINT) | |
2708 | portp->rxmarkmsk |= ST_BREAK; | |
2709 | ||
2710 | /* | |
2711 | * Go through the char size, parity and stop bits and set all the | |
2712 | * option register appropriately. | |
2713 | */ | |
2714 | switch (tiosp->c_cflag & CSIZE) { | |
2715 | case CS5: | |
2716 | cor1 |= COR1_CHL5; | |
2717 | break; | |
2718 | case CS6: | |
2719 | cor1 |= COR1_CHL6; | |
2720 | break; | |
2721 | case CS7: | |
2722 | cor1 |= COR1_CHL7; | |
2723 | break; | |
2724 | default: | |
2725 | cor1 |= COR1_CHL8; | |
2726 | break; | |
2727 | } | |
2728 | ||
2729 | if (tiosp->c_cflag & CSTOPB) | |
2730 | cor1 |= COR1_STOP2; | |
2731 | else | |
2732 | cor1 |= COR1_STOP1; | |
2733 | ||
2734 | if (tiosp->c_cflag & PARENB) { | |
2735 | if (tiosp->c_cflag & PARODD) | |
2736 | cor1 |= (COR1_PARENB | COR1_PARODD); | |
2737 | else | |
2738 | cor1 |= (COR1_PARENB | COR1_PAREVEN); | |
2739 | } else { | |
2740 | cor1 |= COR1_PARNONE; | |
2741 | } | |
2742 | ||
2743 | /* | |
2744 | * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing | |
2745 | * space for hardware flow control and the like. This should be set to | |
2746 | * VMIN. Also here we will set the RX data timeout to 10ms - this should | |
2747 | * really be based on VTIME. | |
2748 | */ | |
2749 | cor3 |= FIFO_RXTHRESHOLD; | |
2750 | rtpr = 2; | |
2751 | ||
2752 | /* | |
2753 | * Calculate the baud rate timers. For now we will just assume that | |
2754 | * the input and output baud are the same. Could have used a baud | |
2755 | * table here, but this way we can generate virtually any baud rate | |
2756 | * we like! | |
2757 | */ | |
2758 | baudrate = tiosp->c_cflag & CBAUD; | |
2759 | if (baudrate & CBAUDEX) { | |
2760 | baudrate &= ~CBAUDEX; | |
2761 | if ((baudrate < 1) || (baudrate > 4)) | |
2762 | tiosp->c_cflag &= ~CBAUDEX; | |
2763 | else | |
2764 | baudrate += 15; | |
2765 | } | |
2766 | baudrate = stl_baudrates[baudrate]; | |
2767 | if ((tiosp->c_cflag & CBAUD) == B38400) { | |
f8ae4764 | 2768 | if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) |
1da177e4 | 2769 | baudrate = 57600; |
f8ae4764 | 2770 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) |
1da177e4 | 2771 | baudrate = 115200; |
f8ae4764 | 2772 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) |
1da177e4 | 2773 | baudrate = 230400; |
f8ae4764 | 2774 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) |
1da177e4 | 2775 | baudrate = 460800; |
f8ae4764 | 2776 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) |
1da177e4 LT |
2777 | baudrate = (portp->baud_base / portp->custom_divisor); |
2778 | } | |
2779 | if (baudrate > STL_CD1400MAXBAUD) | |
2780 | baudrate = STL_CD1400MAXBAUD; | |
2781 | ||
2782 | if (baudrate > 0) { | |
c62429d9 JS |
2783 | for (clk = 0; clk < CD1400_NUMCLKS; clk++) { |
2784 | clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate; | |
1da177e4 LT |
2785 | if (clkdiv < 0x100) |
2786 | break; | |
2787 | } | |
2788 | div = (unsigned char) clkdiv; | |
2789 | } | |
2790 | ||
2791 | /* | |
2792 | * Check what form of modem signaling is required and set it up. | |
2793 | */ | |
2794 | if ((tiosp->c_cflag & CLOCAL) == 0) { | |
2795 | mcor1 |= MCOR1_DCD; | |
2796 | mcor2 |= MCOR2_DCD; | |
2797 | sreron |= SRER_MODEM; | |
f8ae4764 | 2798 | portp->port.flags |= ASYNC_CHECK_CD; |
c62429d9 | 2799 | } else |
f8ae4764 | 2800 | portp->port.flags &= ~ASYNC_CHECK_CD; |
1da177e4 LT |
2801 | |
2802 | /* | |
2803 | * Setup cd1400 enhanced modes if we can. In particular we want to | |
2804 | * handle as much of the flow control as possible automatically. As | |
2805 | * well as saving a few CPU cycles it will also greatly improve flow | |
2806 | * control reliability. | |
2807 | */ | |
2808 | if (tiosp->c_iflag & IXON) { | |
2809 | cor2 |= COR2_TXIBE; | |
2810 | cor3 |= COR3_SCD12; | |
2811 | if (tiosp->c_iflag & IXANY) | |
2812 | cor2 |= COR2_IXM; | |
2813 | } | |
2814 | ||
2815 | if (tiosp->c_cflag & CRTSCTS) { | |
2816 | cor2 |= COR2_CTSAE; | |
2817 | mcor1 |= FIFO_RTSTHRESHOLD; | |
2818 | } | |
2819 | ||
2820 | /* | |
2821 | * All cd1400 register values calculated so go through and set | |
2822 | * them all up. | |
2823 | */ | |
2824 | ||
a0564e14 | 2825 | pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", |
1da177e4 | 2826 | portp->portnr, portp->panelnr, portp->brdnr); |
a0564e14 | 2827 | pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n", |
1da177e4 | 2828 | cor1, cor2, cor3, cor4, cor5); |
a0564e14 | 2829 | pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n", |
1da177e4 | 2830 | mcor1, mcor2, rtpr, sreron, sreroff); |
a0564e14 JS |
2831 | pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div); |
2832 | pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", | |
1da177e4 LT |
2833 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], |
2834 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); | |
1da177e4 | 2835 | |
b65b5b59 | 2836 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2837 | BRDENABLE(portp->brdnr, portp->pagenr); |
2838 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3)); | |
2839 | srer = stl_cd1400getreg(portp, SRER); | |
2840 | stl_cd1400setreg(portp, SRER, 0); | |
2841 | if (stl_cd1400updatereg(portp, COR1, cor1)) | |
2842 | ccr = 1; | |
2843 | if (stl_cd1400updatereg(portp, COR2, cor2)) | |
2844 | ccr = 1; | |
2845 | if (stl_cd1400updatereg(portp, COR3, cor3)) | |
2846 | ccr = 1; | |
2847 | if (ccr) { | |
2848 | stl_cd1400ccrwait(portp); | |
2849 | stl_cd1400setreg(portp, CCR, CCR_CORCHANGE); | |
2850 | } | |
2851 | stl_cd1400setreg(portp, COR4, cor4); | |
2852 | stl_cd1400setreg(portp, COR5, cor5); | |
2853 | stl_cd1400setreg(portp, MCOR1, mcor1); | |
2854 | stl_cd1400setreg(portp, MCOR2, mcor2); | |
2855 | if (baudrate > 0) { | |
2856 | stl_cd1400setreg(portp, TCOR, clk); | |
2857 | stl_cd1400setreg(portp, TBPR, div); | |
2858 | stl_cd1400setreg(portp, RCOR, clk); | |
2859 | stl_cd1400setreg(portp, RBPR, div); | |
2860 | } | |
2861 | stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]); | |
2862 | stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]); | |
2863 | stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]); | |
2864 | stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]); | |
2865 | stl_cd1400setreg(portp, RTPR, rtpr); | |
2866 | mcor1 = stl_cd1400getreg(portp, MSVR1); | |
2867 | if (mcor1 & MSVR1_DCD) | |
2868 | portp->sigs |= TIOCM_CD; | |
2869 | else | |
2870 | portp->sigs &= ~TIOCM_CD; | |
2871 | stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron)); | |
2872 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 2873 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
2874 | } |
2875 | ||
2876 | /*****************************************************************************/ | |
2877 | ||
2878 | /* | |
2879 | * Set the state of the DTR and RTS signals. | |
2880 | */ | |
2881 | ||
ca7ed0f2 | 2882 | static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts) |
1da177e4 LT |
2883 | { |
2884 | unsigned char msvr1, msvr2; | |
2885 | unsigned long flags; | |
2886 | ||
a0564e14 JS |
2887 | pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n", |
2888 | portp, dtr, rts); | |
1da177e4 LT |
2889 | |
2890 | msvr1 = 0; | |
2891 | msvr2 = 0; | |
2892 | if (dtr > 0) | |
2893 | msvr1 = MSVR1_DTR; | |
2894 | if (rts > 0) | |
2895 | msvr2 = MSVR2_RTS; | |
2896 | ||
b65b5b59 | 2897 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2898 | BRDENABLE(portp->brdnr, portp->pagenr); |
2899 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
2900 | if (rts >= 0) | |
2901 | stl_cd1400setreg(portp, MSVR2, msvr2); | |
2902 | if (dtr >= 0) | |
2903 | stl_cd1400setreg(portp, MSVR1, msvr1); | |
2904 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 2905 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
2906 | } |
2907 | ||
2908 | /*****************************************************************************/ | |
2909 | ||
2910 | /* | |
2911 | * Return the state of the signals. | |
2912 | */ | |
2913 | ||
ca7ed0f2 | 2914 | static int stl_cd1400getsignals(struct stlport *portp) |
1da177e4 LT |
2915 | { |
2916 | unsigned char msvr1, msvr2; | |
2917 | unsigned long flags; | |
2918 | int sigs; | |
2919 | ||
a0564e14 | 2920 | pr_debug("stl_cd1400getsignals(portp=%p)\n", portp); |
1da177e4 | 2921 | |
b65b5b59 | 2922 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2923 | BRDENABLE(portp->brdnr, portp->pagenr); |
2924 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
2925 | msvr1 = stl_cd1400getreg(portp, MSVR1); | |
2926 | msvr2 = stl_cd1400getreg(portp, MSVR2); | |
2927 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 2928 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
2929 | |
2930 | sigs = 0; | |
2931 | sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0; | |
2932 | sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0; | |
2933 | sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0; | |
2934 | sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0; | |
2935 | #if 0 | |
2936 | sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0; | |
2937 | sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0; | |
2938 | #else | |
2939 | sigs |= TIOCM_DSR; | |
2940 | #endif | |
014c2544 | 2941 | return sigs; |
1da177e4 LT |
2942 | } |
2943 | ||
2944 | /*****************************************************************************/ | |
2945 | ||
2946 | /* | |
2947 | * Enable/Disable the Transmitter and/or Receiver. | |
2948 | */ | |
2949 | ||
ca7ed0f2 | 2950 | static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx) |
1da177e4 LT |
2951 | { |
2952 | unsigned char ccr; | |
2953 | unsigned long flags; | |
2954 | ||
a0564e14 JS |
2955 | pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); |
2956 | ||
1da177e4 LT |
2957 | ccr = 0; |
2958 | ||
2959 | if (tx == 0) | |
2960 | ccr |= CCR_TXDISABLE; | |
2961 | else if (tx > 0) | |
2962 | ccr |= CCR_TXENABLE; | |
2963 | if (rx == 0) | |
2964 | ccr |= CCR_RXDISABLE; | |
2965 | else if (rx > 0) | |
2966 | ccr |= CCR_RXENABLE; | |
2967 | ||
b65b5b59 | 2968 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
2969 | BRDENABLE(portp->brdnr, portp->pagenr); |
2970 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
2971 | stl_cd1400ccrwait(portp); | |
2972 | stl_cd1400setreg(portp, CCR, ccr); | |
2973 | stl_cd1400ccrwait(portp); | |
2974 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 2975 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
2976 | } |
2977 | ||
2978 | /*****************************************************************************/ | |
2979 | ||
2980 | /* | |
2981 | * Start/stop the Transmitter and/or Receiver. | |
2982 | */ | |
2983 | ||
ca7ed0f2 | 2984 | static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx) |
1da177e4 LT |
2985 | { |
2986 | unsigned char sreron, sreroff; | |
2987 | unsigned long flags; | |
2988 | ||
a0564e14 | 2989 | pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); |
1da177e4 LT |
2990 | |
2991 | sreron = 0; | |
2992 | sreroff = 0; | |
2993 | if (tx == 0) | |
2994 | sreroff |= (SRER_TXDATA | SRER_TXEMPTY); | |
2995 | else if (tx == 1) | |
2996 | sreron |= SRER_TXDATA; | |
2997 | else if (tx >= 2) | |
2998 | sreron |= SRER_TXEMPTY; | |
2999 | if (rx == 0) | |
3000 | sreroff |= SRER_RXDATA; | |
3001 | else if (rx > 0) | |
3002 | sreron |= SRER_RXDATA; | |
3003 | ||
b65b5b59 | 3004 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3005 | BRDENABLE(portp->brdnr, portp->pagenr); |
3006 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3007 | stl_cd1400setreg(portp, SRER, | |
3008 | ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron)); | |
3009 | BRDDISABLE(portp->brdnr); | |
3010 | if (tx > 0) | |
3011 | set_bit(ASYI_TXBUSY, &portp->istate); | |
b65b5b59 | 3012 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3013 | } |
3014 | ||
3015 | /*****************************************************************************/ | |
3016 | ||
3017 | /* | |
3018 | * Disable all interrupts from this port. | |
3019 | */ | |
3020 | ||
ca7ed0f2 | 3021 | static void stl_cd1400disableintrs(struct stlport *portp) |
1da177e4 LT |
3022 | { |
3023 | unsigned long flags; | |
3024 | ||
a0564e14 JS |
3025 | pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp); |
3026 | ||
b65b5b59 | 3027 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3028 | BRDENABLE(portp->brdnr, portp->pagenr); |
3029 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3030 | stl_cd1400setreg(portp, SRER, 0); | |
3031 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3032 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3033 | } |
3034 | ||
3035 | /*****************************************************************************/ | |
3036 | ||
ca7ed0f2 | 3037 | static void stl_cd1400sendbreak(struct stlport *portp, int len) |
1da177e4 LT |
3038 | { |
3039 | unsigned long flags; | |
3040 | ||
a0564e14 | 3041 | pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len); |
1da177e4 | 3042 | |
b65b5b59 | 3043 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3044 | BRDENABLE(portp->brdnr, portp->pagenr); |
3045 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3046 | stl_cd1400setreg(portp, SRER, | |
3047 | ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) | | |
3048 | SRER_TXEMPTY)); | |
3049 | BRDDISABLE(portp->brdnr); | |
3050 | portp->brklen = len; | |
3051 | if (len == 1) | |
3052 | portp->stats.txbreaks++; | |
b65b5b59 | 3053 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3054 | } |
3055 | ||
3056 | /*****************************************************************************/ | |
3057 | ||
3058 | /* | |
3059 | * Take flow control actions... | |
3060 | */ | |
3061 | ||
ca7ed0f2 | 3062 | static void stl_cd1400flowctrl(struct stlport *portp, int state) |
1da177e4 LT |
3063 | { |
3064 | struct tty_struct *tty; | |
3065 | unsigned long flags; | |
3066 | ||
a0564e14 | 3067 | pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state); |
1da177e4 | 3068 | |
615e4a71 | 3069 | if (portp == NULL) |
1da177e4 | 3070 | return; |
d18a750f | 3071 | tty = tty_port_tty_get(&portp->port); |
615e4a71 | 3072 | if (tty == NULL) |
1da177e4 LT |
3073 | return; |
3074 | ||
b65b5b59 | 3075 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3076 | BRDENABLE(portp->brdnr, portp->pagenr); |
3077 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3078 | ||
3079 | if (state) { | |
3080 | if (tty->termios->c_iflag & IXOFF) { | |
3081 | stl_cd1400ccrwait(portp); | |
3082 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); | |
3083 | portp->stats.rxxon++; | |
3084 | stl_cd1400ccrwait(portp); | |
3085 | } | |
3086 | /* | |
3087 | * Question: should we return RTS to what it was before? It may | |
3088 | * have been set by an ioctl... Suppose not, since if you have | |
3089 | * hardware flow control set then it is pretty silly to go and | |
3090 | * set the RTS line by hand. | |
3091 | */ | |
3092 | if (tty->termios->c_cflag & CRTSCTS) { | |
3093 | stl_cd1400setreg(portp, MCOR1, | |
3094 | (stl_cd1400getreg(portp, MCOR1) | | |
3095 | FIFO_RTSTHRESHOLD)); | |
3096 | stl_cd1400setreg(portp, MSVR2, MSVR2_RTS); | |
3097 | portp->stats.rxrtson++; | |
3098 | } | |
3099 | } else { | |
3100 | if (tty->termios->c_iflag & IXOFF) { | |
3101 | stl_cd1400ccrwait(portp); | |
3102 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); | |
3103 | portp->stats.rxxoff++; | |
3104 | stl_cd1400ccrwait(portp); | |
3105 | } | |
3106 | if (tty->termios->c_cflag & CRTSCTS) { | |
3107 | stl_cd1400setreg(portp, MCOR1, | |
3108 | (stl_cd1400getreg(portp, MCOR1) & 0xf0)); | |
3109 | stl_cd1400setreg(portp, MSVR2, 0); | |
3110 | portp->stats.rxrtsoff++; | |
3111 | } | |
3112 | } | |
3113 | ||
3114 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3115 | spin_unlock_irqrestore(&brd_lock, flags); |
d18a750f | 3116 | tty_kref_put(tty); |
1da177e4 LT |
3117 | } |
3118 | ||
3119 | /*****************************************************************************/ | |
3120 | ||
3121 | /* | |
3122 | * Send a flow control character... | |
3123 | */ | |
3124 | ||
ca7ed0f2 | 3125 | static void stl_cd1400sendflow(struct stlport *portp, int state) |
1da177e4 LT |
3126 | { |
3127 | struct tty_struct *tty; | |
3128 | unsigned long flags; | |
3129 | ||
a0564e14 | 3130 | pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state); |
1da177e4 | 3131 | |
615e4a71 | 3132 | if (portp == NULL) |
1da177e4 | 3133 | return; |
d18a750f | 3134 | tty = tty_port_tty_get(&portp->port); |
615e4a71 | 3135 | if (tty == NULL) |
1da177e4 LT |
3136 | return; |
3137 | ||
b65b5b59 | 3138 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3139 | BRDENABLE(portp->brdnr, portp->pagenr); |
3140 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3141 | if (state) { | |
3142 | stl_cd1400ccrwait(portp); | |
3143 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); | |
3144 | portp->stats.rxxon++; | |
3145 | stl_cd1400ccrwait(portp); | |
3146 | } else { | |
3147 | stl_cd1400ccrwait(portp); | |
3148 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); | |
3149 | portp->stats.rxxoff++; | |
3150 | stl_cd1400ccrwait(portp); | |
3151 | } | |
3152 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3153 | spin_unlock_irqrestore(&brd_lock, flags); |
d18a750f | 3154 | tty_kref_put(tty); |
1da177e4 LT |
3155 | } |
3156 | ||
3157 | /*****************************************************************************/ | |
3158 | ||
ca7ed0f2 | 3159 | static void stl_cd1400flush(struct stlport *portp) |
1da177e4 LT |
3160 | { |
3161 | unsigned long flags; | |
3162 | ||
a0564e14 | 3163 | pr_debug("stl_cd1400flush(portp=%p)\n", portp); |
1da177e4 | 3164 | |
615e4a71 | 3165 | if (portp == NULL) |
1da177e4 LT |
3166 | return; |
3167 | ||
b65b5b59 | 3168 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3169 | BRDENABLE(portp->brdnr, portp->pagenr); |
3170 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3171 | stl_cd1400ccrwait(portp); | |
3172 | stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO); | |
3173 | stl_cd1400ccrwait(portp); | |
3174 | portp->tx.tail = portp->tx.head; | |
3175 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3176 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3177 | } |
3178 | ||
3179 | /*****************************************************************************/ | |
3180 | ||
3181 | /* | |
3182 | * Return the current state of data flow on this port. This is only | |
6f0b31c3 | 3183 | * really interesting when determining if data has fully completed |
1da177e4 LT |
3184 | * transmission or not... This is easy for the cd1400, it accurately |
3185 | * maintains the busy port flag. | |
3186 | */ | |
3187 | ||
ca7ed0f2 | 3188 | static int stl_cd1400datastate(struct stlport *portp) |
1da177e4 | 3189 | { |
a0564e14 | 3190 | pr_debug("stl_cd1400datastate(portp=%p)\n", portp); |
1da177e4 | 3191 | |
615e4a71 | 3192 | if (portp == NULL) |
014c2544 | 3193 | return 0; |
1da177e4 | 3194 | |
014c2544 | 3195 | return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0; |
1da177e4 LT |
3196 | } |
3197 | ||
3198 | /*****************************************************************************/ | |
3199 | ||
3200 | /* | |
3201 | * Interrupt service routine for cd1400 EasyIO boards. | |
3202 | */ | |
3203 | ||
ca7ed0f2 | 3204 | static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase) |
1da177e4 LT |
3205 | { |
3206 | unsigned char svrtype; | |
3207 | ||
a0564e14 | 3208 | pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase); |
1da177e4 | 3209 | |
b65b5b59 | 3210 | spin_lock(&brd_lock); |
1da177e4 LT |
3211 | outb(SVRR, iobase); |
3212 | svrtype = inb(iobase + EREG_DATA); | |
3213 | if (panelp->nrports > 4) { | |
3214 | outb((SVRR + 0x80), iobase); | |
3215 | svrtype |= inb(iobase + EREG_DATA); | |
3216 | } | |
3217 | ||
3218 | if (svrtype & SVRR_RX) | |
3219 | stl_cd1400rxisr(panelp, iobase); | |
3220 | else if (svrtype & SVRR_TX) | |
3221 | stl_cd1400txisr(panelp, iobase); | |
3222 | else if (svrtype & SVRR_MDM) | |
3223 | stl_cd1400mdmisr(panelp, iobase); | |
b65b5b59 AC |
3224 | |
3225 | spin_unlock(&brd_lock); | |
1da177e4 LT |
3226 | } |
3227 | ||
3228 | /*****************************************************************************/ | |
3229 | ||
3230 | /* | |
3231 | * Interrupt service routine for cd1400 panels. | |
3232 | */ | |
3233 | ||
ca7ed0f2 | 3234 | static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase) |
1da177e4 LT |
3235 | { |
3236 | unsigned char svrtype; | |
3237 | ||
a0564e14 | 3238 | pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase); |
1da177e4 LT |
3239 | |
3240 | outb(SVRR, iobase); | |
3241 | svrtype = inb(iobase + EREG_DATA); | |
3242 | outb((SVRR + 0x80), iobase); | |
3243 | svrtype |= inb(iobase + EREG_DATA); | |
3244 | if (svrtype & SVRR_RX) | |
3245 | stl_cd1400rxisr(panelp, iobase); | |
3246 | else if (svrtype & SVRR_TX) | |
3247 | stl_cd1400txisr(panelp, iobase); | |
3248 | else if (svrtype & SVRR_MDM) | |
3249 | stl_cd1400mdmisr(panelp, iobase); | |
3250 | } | |
3251 | ||
3252 | ||
3253 | /*****************************************************************************/ | |
3254 | ||
3255 | /* | |
3256 | * Unfortunately we need to handle breaks in the TX data stream, since | |
3257 | * this is the only way to generate them on the cd1400. | |
3258 | */ | |
3259 | ||
60be4810 | 3260 | static int stl_cd1400breakisr(struct stlport *portp, int ioaddr) |
1da177e4 LT |
3261 | { |
3262 | if (portp->brklen == 1) { | |
3263 | outb((COR2 + portp->uartaddr), ioaddr); | |
3264 | outb((inb(ioaddr + EREG_DATA) | COR2_ETC), | |
3265 | (ioaddr + EREG_DATA)); | |
3266 | outb((TDR + portp->uartaddr), ioaddr); | |
3267 | outb(ETC_CMD, (ioaddr + EREG_DATA)); | |
3268 | outb(ETC_STARTBREAK, (ioaddr + EREG_DATA)); | |
3269 | outb((SRER + portp->uartaddr), ioaddr); | |
3270 | outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)), | |
3271 | (ioaddr + EREG_DATA)); | |
014c2544 | 3272 | return 1; |
1da177e4 LT |
3273 | } else if (portp->brklen > 1) { |
3274 | outb((TDR + portp->uartaddr), ioaddr); | |
3275 | outb(ETC_CMD, (ioaddr + EREG_DATA)); | |
3276 | outb(ETC_STOPBREAK, (ioaddr + EREG_DATA)); | |
3277 | portp->brklen = -1; | |
014c2544 | 3278 | return 1; |
1da177e4 LT |
3279 | } else { |
3280 | outb((COR2 + portp->uartaddr), ioaddr); | |
3281 | outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC), | |
3282 | (ioaddr + EREG_DATA)); | |
3283 | portp->brklen = 0; | |
3284 | } | |
014c2544 | 3285 | return 0; |
1da177e4 LT |
3286 | } |
3287 | ||
3288 | /*****************************************************************************/ | |
3289 | ||
3290 | /* | |
3291 | * Transmit interrupt handler. This has gotta be fast! Handling TX | |
3292 | * chars is pretty simple, stuff as many as possible from the TX buffer | |
3293 | * into the cd1400 FIFO. Must also handle TX breaks here, since they | |
3294 | * are embedded as commands in the data stream. Oh no, had to use a goto! | |
3295 | * This could be optimized more, will do when I get time... | |
3296 | * In practice it is possible that interrupts are enabled but that the | |
3297 | * port has been hung up. Need to handle not having any TX buffer here, | |
3298 | * this is done by using the side effect that head and tail will also | |
3299 | * be NULL if the buffer has been freed. | |
3300 | */ | |
3301 | ||
ca7ed0f2 | 3302 | static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) |
1da177e4 | 3303 | { |
ca7ed0f2 | 3304 | struct stlport *portp; |
1da177e4 LT |
3305 | int len, stlen; |
3306 | char *head, *tail; | |
3307 | unsigned char ioack, srer; | |
d18a750f | 3308 | struct tty_struct *tty; |
1da177e4 | 3309 | |
a0564e14 | 3310 | pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); |
1da177e4 LT |
3311 | |
3312 | ioack = inb(ioaddr + EREG_TXACK); | |
3313 | if (((ioack & panelp->ackmask) != 0) || | |
3314 | ((ioack & ACK_TYPMASK) != ACK_TYPTX)) { | |
3315 | printk("STALLION: bad TX interrupt ack value=%x\n", ioack); | |
3316 | return; | |
3317 | } | |
3318 | portp = panelp->ports[(ioack >> 3)]; | |
3319 | ||
3320 | /* | |
3321 | * Unfortunately we need to handle breaks in the data stream, since | |
3322 | * this is the only way to generate them on the cd1400. Do it now if | |
3323 | * a break is to be sent. | |
3324 | */ | |
3325 | if (portp->brklen != 0) | |
3326 | if (stl_cd1400breakisr(portp, ioaddr)) | |
3327 | goto stl_txalldone; | |
3328 | ||
3329 | head = portp->tx.head; | |
3330 | tail = portp->tx.tail; | |
3331 | len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
3332 | if ((len == 0) || ((len < STL_TXBUFLOW) && | |
3333 | (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { | |
3334 | set_bit(ASYI_TXLOW, &portp->istate); | |
d18a750f AC |
3335 | tty = tty_port_tty_get(&portp->port); |
3336 | if (tty) { | |
3337 | tty_wakeup(tty); | |
3338 | tty_kref_put(tty); | |
3339 | } | |
1da177e4 LT |
3340 | } |
3341 | ||
3342 | if (len == 0) { | |
3343 | outb((SRER + portp->uartaddr), ioaddr); | |
3344 | srer = inb(ioaddr + EREG_DATA); | |
3345 | if (srer & SRER_TXDATA) { | |
3346 | srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY; | |
3347 | } else { | |
3348 | srer &= ~(SRER_TXDATA | SRER_TXEMPTY); | |
3349 | clear_bit(ASYI_TXBUSY, &portp->istate); | |
3350 | } | |
3351 | outb(srer, (ioaddr + EREG_DATA)); | |
3352 | } else { | |
843b568c | 3353 | len = min(len, CD1400_TXFIFOSIZE); |
1da177e4 | 3354 | portp->stats.txtotal += len; |
319fe7c3 JS |
3355 | stlen = min_t(unsigned int, len, |
3356 | (portp->tx.buf + STL_TXBUFSIZE) - tail); | |
1da177e4 LT |
3357 | outb((TDR + portp->uartaddr), ioaddr); |
3358 | outsb((ioaddr + EREG_DATA), tail, stlen); | |
3359 | len -= stlen; | |
3360 | tail += stlen; | |
3361 | if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) | |
3362 | tail = portp->tx.buf; | |
3363 | if (len > 0) { | |
3364 | outsb((ioaddr + EREG_DATA), tail, len); | |
3365 | tail += len; | |
3366 | } | |
3367 | portp->tx.tail = tail; | |
3368 | } | |
3369 | ||
3370 | stl_txalldone: | |
3371 | outb((EOSRR + portp->uartaddr), ioaddr); | |
3372 | outb(0, (ioaddr + EREG_DATA)); | |
3373 | } | |
3374 | ||
3375 | /*****************************************************************************/ | |
3376 | ||
3377 | /* | |
3378 | * Receive character interrupt handler. Determine if we have good chars | |
3379 | * or bad chars and then process appropriately. Good chars are easy | |
3380 | * just shove the lot into the RX buffer and set all status byte to 0. | |
3381 | * If a bad RX char then process as required. This routine needs to be | |
3382 | * fast! In practice it is possible that we get an interrupt on a port | |
3383 | * that is closed. This can happen on hangups - since they completely | |
3384 | * shutdown a port not in user context. Need to handle this case. | |
3385 | */ | |
3386 | ||
ca7ed0f2 | 3387 | static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) |
1da177e4 | 3388 | { |
ca7ed0f2 | 3389 | struct stlport *portp; |
1da177e4 LT |
3390 | struct tty_struct *tty; |
3391 | unsigned int ioack, len, buflen; | |
3392 | unsigned char status; | |
3393 | char ch; | |
3394 | ||
a0564e14 | 3395 | pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); |
1da177e4 LT |
3396 | |
3397 | ioack = inb(ioaddr + EREG_RXACK); | |
3398 | if ((ioack & panelp->ackmask) != 0) { | |
3399 | printk("STALLION: bad RX interrupt ack value=%x\n", ioack); | |
3400 | return; | |
3401 | } | |
3402 | portp = panelp->ports[(ioack >> 3)]; | |
d18a750f | 3403 | tty = tty_port_tty_get(&portp->port); |
1da177e4 LT |
3404 | |
3405 | if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) { | |
3406 | outb((RDCR + portp->uartaddr), ioaddr); | |
3407 | len = inb(ioaddr + EREG_DATA); | |
33f0f88f | 3408 | if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { |
319fe7c3 | 3409 | len = min_t(unsigned int, len, sizeof(stl_unwanted)); |
1da177e4 LT |
3410 | outb((RDSR + portp->uartaddr), ioaddr); |
3411 | insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); | |
3412 | portp->stats.rxlost += len; | |
3413 | portp->stats.rxtotal += len; | |
3414 | } else { | |
843b568c | 3415 | len = min(len, buflen); |
1da177e4 | 3416 | if (len > 0) { |
33f0f88f | 3417 | unsigned char *ptr; |
1da177e4 | 3418 | outb((RDSR + portp->uartaddr), ioaddr); |
33f0f88f AC |
3419 | tty_prepare_flip_string(tty, &ptr, len); |
3420 | insb((ioaddr + EREG_DATA), ptr, len); | |
1da177e4 LT |
3421 | tty_schedule_flip(tty); |
3422 | portp->stats.rxtotal += len; | |
3423 | } | |
3424 | } | |
3425 | } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) { | |
3426 | outb((RDSR + portp->uartaddr), ioaddr); | |
3427 | status = inb(ioaddr + EREG_DATA); | |
3428 | ch = inb(ioaddr + EREG_DATA); | |
3429 | if (status & ST_PARITY) | |
3430 | portp->stats.rxparity++; | |
3431 | if (status & ST_FRAMING) | |
3432 | portp->stats.rxframing++; | |
3433 | if (status & ST_OVERRUN) | |
3434 | portp->stats.rxoverrun++; | |
3435 | if (status & ST_BREAK) | |
3436 | portp->stats.rxbreaks++; | |
3437 | if (status & ST_SCHARMASK) { | |
3438 | if ((status & ST_SCHARMASK) == ST_SCHAR1) | |
3439 | portp->stats.txxon++; | |
3440 | if ((status & ST_SCHARMASK) == ST_SCHAR2) | |
3441 | portp->stats.txxoff++; | |
3442 | goto stl_rxalldone; | |
3443 | } | |
33f0f88f | 3444 | if (tty != NULL && (portp->rxignoremsk & status) == 0) { |
1da177e4 LT |
3445 | if (portp->rxmarkmsk & status) { |
3446 | if (status & ST_BREAK) { | |
3447 | status = TTY_BREAK; | |
f8ae4764 | 3448 | if (portp->port.flags & ASYNC_SAK) { |
1da177e4 LT |
3449 | do_SAK(tty); |
3450 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3451 | } | |
c62429d9 | 3452 | } else if (status & ST_PARITY) |
1da177e4 | 3453 | status = TTY_PARITY; |
c62429d9 | 3454 | else if (status & ST_FRAMING) |
1da177e4 | 3455 | status = TTY_FRAME; |
c62429d9 | 3456 | else if(status & ST_OVERRUN) |
1da177e4 | 3457 | status = TTY_OVERRUN; |
c62429d9 | 3458 | else |
1da177e4 | 3459 | status = 0; |
c62429d9 | 3460 | } else |
1da177e4 | 3461 | status = 0; |
33f0f88f AC |
3462 | tty_insert_flip_char(tty, ch, status); |
3463 | tty_schedule_flip(tty); | |
1da177e4 LT |
3464 | } |
3465 | } else { | |
3466 | printk("STALLION: bad RX interrupt ack value=%x\n", ioack); | |
d18a750f | 3467 | tty_kref_put(tty); |
1da177e4 LT |
3468 | return; |
3469 | } | |
3470 | ||
3471 | stl_rxalldone: | |
d18a750f | 3472 | tty_kref_put(tty); |
1da177e4 LT |
3473 | outb((EOSRR + portp->uartaddr), ioaddr); |
3474 | outb(0, (ioaddr + EREG_DATA)); | |
3475 | } | |
3476 | ||
3477 | /*****************************************************************************/ | |
3478 | ||
3479 | /* | |
3480 | * Modem interrupt handler. The is called when the modem signal line | |
3481 | * (DCD) has changed state. Leave most of the work to the off-level | |
3482 | * processing routine. | |
3483 | */ | |
3484 | ||
ca7ed0f2 | 3485 | static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr) |
1da177e4 | 3486 | { |
ca7ed0f2 | 3487 | struct stlport *portp; |
1da177e4 LT |
3488 | unsigned int ioack; |
3489 | unsigned char misr; | |
3490 | ||
a0564e14 | 3491 | pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp); |
1da177e4 LT |
3492 | |
3493 | ioack = inb(ioaddr + EREG_MDACK); | |
3494 | if (((ioack & panelp->ackmask) != 0) || | |
3495 | ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) { | |
3496 | printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack); | |
3497 | return; | |
3498 | } | |
3499 | portp = panelp->ports[(ioack >> 3)]; | |
3500 | ||
3501 | outb((MISR + portp->uartaddr), ioaddr); | |
3502 | misr = inb(ioaddr + EREG_DATA); | |
3503 | if (misr & MISR_DCD) { | |
ccfea3c9 | 3504 | stl_cd_change(portp); |
1da177e4 LT |
3505 | portp->stats.modem++; |
3506 | } | |
3507 | ||
3508 | outb((EOSRR + portp->uartaddr), ioaddr); | |
3509 | outb(0, (ioaddr + EREG_DATA)); | |
3510 | } | |
3511 | ||
3512 | /*****************************************************************************/ | |
3513 | /* SC26198 HARDWARE FUNCTIONS */ | |
3514 | /*****************************************************************************/ | |
3515 | ||
3516 | /* | |
3517 | * These functions get/set/update the registers of the sc26198 UARTs. | |
3518 | * Access to the sc26198 registers is via an address/data io port pair. | |
3519 | * (Maybe should make this inline...) | |
3520 | */ | |
3521 | ||
ca7ed0f2 | 3522 | static int stl_sc26198getreg(struct stlport *portp, int regnr) |
1da177e4 LT |
3523 | { |
3524 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
014c2544 | 3525 | return inb(portp->ioaddr + XP_DATA); |
1da177e4 LT |
3526 | } |
3527 | ||
ca7ed0f2 | 3528 | static void stl_sc26198setreg(struct stlport *portp, int regnr, int value) |
1da177e4 LT |
3529 | { |
3530 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
3531 | outb(value, (portp->ioaddr + XP_DATA)); | |
3532 | } | |
3533 | ||
ca7ed0f2 | 3534 | static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value) |
1da177e4 LT |
3535 | { |
3536 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
3537 | if (inb(portp->ioaddr + XP_DATA) != value) { | |
3538 | outb(value, (portp->ioaddr + XP_DATA)); | |
014c2544 | 3539 | return 1; |
1da177e4 | 3540 | } |
014c2544 | 3541 | return 0; |
1da177e4 LT |
3542 | } |
3543 | ||
3544 | /*****************************************************************************/ | |
3545 | ||
3546 | /* | |
3547 | * Functions to get and set the sc26198 global registers. | |
3548 | */ | |
3549 | ||
ca7ed0f2 | 3550 | static int stl_sc26198getglobreg(struct stlport *portp, int regnr) |
1da177e4 LT |
3551 | { |
3552 | outb(regnr, (portp->ioaddr + XP_ADDR)); | |
014c2544 | 3553 | return inb(portp->ioaddr + XP_DATA); |
1da177e4 LT |
3554 | } |
3555 | ||
3556 | #if 0 | |
ca7ed0f2 | 3557 | static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value) |
1da177e4 LT |
3558 | { |
3559 | outb(regnr, (portp->ioaddr + XP_ADDR)); | |
3560 | outb(value, (portp->ioaddr + XP_DATA)); | |
3561 | } | |
3562 | #endif | |
3563 | ||
3564 | /*****************************************************************************/ | |
3565 | ||
3566 | /* | |
3567 | * Inbitialize the UARTs in a panel. We don't care what sort of board | |
3568 | * these ports are on - since the port io registers are almost | |
3569 | * identical when dealing with ports. | |
3570 | */ | |
3571 | ||
ca7ed0f2 | 3572 | static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp) |
1da177e4 LT |
3573 | { |
3574 | int chipmask, i; | |
3575 | int nrchips, ioaddr; | |
3576 | ||
a0564e14 | 3577 | pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); |
1da177e4 LT |
3578 | |
3579 | BRDENABLE(panelp->brdnr, panelp->pagenr); | |
3580 | ||
3581 | /* | |
3582 | * Check that each chip is present and started up OK. | |
3583 | */ | |
3584 | chipmask = 0; | |
3585 | nrchips = (panelp->nrports + 4) / SC26198_PORTS; | |
3586 | if (brdp->brdtype == BRD_ECHPCI) | |
3587 | outb(panelp->pagenr, brdp->ioctrl); | |
3588 | ||
c62429d9 | 3589 | for (i = 0; i < nrchips; i++) { |
1da177e4 LT |
3590 | ioaddr = panelp->iobase + (i * 4); |
3591 | outb(SCCR, (ioaddr + XP_ADDR)); | |
3592 | outb(CR_RESETALL, (ioaddr + XP_DATA)); | |
3593 | outb(TSTR, (ioaddr + XP_ADDR)); | |
3594 | if (inb(ioaddr + XP_DATA) != 0) { | |
3595 | printk("STALLION: sc26198 not responding, " | |
3596 | "brd=%d panel=%d chip=%d\n", | |
3597 | panelp->brdnr, panelp->panelnr, i); | |
3598 | continue; | |
3599 | } | |
3600 | chipmask |= (0x1 << i); | |
3601 | outb(GCCR, (ioaddr + XP_ADDR)); | |
3602 | outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA)); | |
3603 | outb(WDTRCR, (ioaddr + XP_ADDR)); | |
3604 | outb(0xff, (ioaddr + XP_DATA)); | |
3605 | } | |
3606 | ||
3607 | BRDDISABLE(panelp->brdnr); | |
014c2544 | 3608 | return chipmask; |
1da177e4 LT |
3609 | } |
3610 | ||
3611 | /*****************************************************************************/ | |
3612 | ||
3613 | /* | |
3614 | * Initialize hardware specific port registers. | |
3615 | */ | |
3616 | ||
ca7ed0f2 | 3617 | static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) |
1da177e4 | 3618 | { |
a0564e14 JS |
3619 | pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, |
3620 | panelp, portp); | |
1da177e4 | 3621 | |
615e4a71 JS |
3622 | if ((brdp == NULL) || (panelp == NULL) || |
3623 | (portp == NULL)) | |
1da177e4 LT |
3624 | return; |
3625 | ||
3626 | portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4); | |
3627 | portp->uartaddr = (portp->portnr & 0x07) << 4; | |
3628 | portp->pagenr = panelp->pagenr; | |
3629 | portp->hwid = 0x1; | |
3630 | ||
3631 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3632 | stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS); | |
3633 | BRDDISABLE(portp->brdnr); | |
3634 | } | |
3635 | ||
3636 | /*****************************************************************************/ | |
3637 | ||
3638 | /* | |
3639 | * Set up the sc26198 registers for a port based on the termios port | |
3640 | * settings. | |
3641 | */ | |
3642 | ||
606d099c | 3643 | static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp) |
1da177e4 | 3644 | { |
ca7ed0f2 | 3645 | struct stlbrd *brdp; |
1da177e4 LT |
3646 | unsigned long flags; |
3647 | unsigned int baudrate; | |
3648 | unsigned char mr0, mr1, mr2, clk; | |
3649 | unsigned char imron, imroff, iopr, ipr; | |
3650 | ||
3651 | mr0 = 0; | |
3652 | mr1 = 0; | |
3653 | mr2 = 0; | |
3654 | clk = 0; | |
3655 | iopr = 0; | |
3656 | imron = 0; | |
3657 | imroff = 0; | |
3658 | ||
3659 | brdp = stl_brds[portp->brdnr]; | |
615e4a71 | 3660 | if (brdp == NULL) |
1da177e4 LT |
3661 | return; |
3662 | ||
3663 | /* | |
3664 | * Set up the RX char ignore mask with those RX error types we | |
3665 | * can ignore. | |
3666 | */ | |
3667 | portp->rxignoremsk = 0; | |
3668 | if (tiosp->c_iflag & IGNPAR) | |
3669 | portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING | | |
3670 | SR_RXOVERRUN); | |
3671 | if (tiosp->c_iflag & IGNBRK) | |
3672 | portp->rxignoremsk |= SR_RXBREAK; | |
3673 | ||
3674 | portp->rxmarkmsk = SR_RXOVERRUN; | |
3675 | if (tiosp->c_iflag & (INPCK | PARMRK)) | |
3676 | portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING); | |
3677 | if (tiosp->c_iflag & BRKINT) | |
3678 | portp->rxmarkmsk |= SR_RXBREAK; | |
3679 | ||
3680 | /* | |
3681 | * Go through the char size, parity and stop bits and set all the | |
3682 | * option register appropriately. | |
3683 | */ | |
3684 | switch (tiosp->c_cflag & CSIZE) { | |
3685 | case CS5: | |
3686 | mr1 |= MR1_CS5; | |
3687 | break; | |
3688 | case CS6: | |
3689 | mr1 |= MR1_CS6; | |
3690 | break; | |
3691 | case CS7: | |
3692 | mr1 |= MR1_CS7; | |
3693 | break; | |
3694 | default: | |
3695 | mr1 |= MR1_CS8; | |
3696 | break; | |
3697 | } | |
3698 | ||
3699 | if (tiosp->c_cflag & CSTOPB) | |
3700 | mr2 |= MR2_STOP2; | |
3701 | else | |
3702 | mr2 |= MR2_STOP1; | |
3703 | ||
3704 | if (tiosp->c_cflag & PARENB) { | |
3705 | if (tiosp->c_cflag & PARODD) | |
3706 | mr1 |= (MR1_PARENB | MR1_PARODD); | |
3707 | else | |
3708 | mr1 |= (MR1_PARENB | MR1_PAREVEN); | |
c62429d9 | 3709 | } else |
1da177e4 | 3710 | mr1 |= MR1_PARNONE; |
1da177e4 LT |
3711 | |
3712 | mr1 |= MR1_ERRBLOCK; | |
3713 | ||
3714 | /* | |
3715 | * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing | |
3716 | * space for hardware flow control and the like. This should be set to | |
3717 | * VMIN. | |
3718 | */ | |
3719 | mr2 |= MR2_RXFIFOHALF; | |
3720 | ||
3721 | /* | |
3722 | * Calculate the baud rate timers. For now we will just assume that | |
3723 | * the input and output baud are the same. The sc26198 has a fixed | |
3724 | * baud rate table, so only discrete baud rates possible. | |
3725 | */ | |
3726 | baudrate = tiosp->c_cflag & CBAUD; | |
3727 | if (baudrate & CBAUDEX) { | |
3728 | baudrate &= ~CBAUDEX; | |
3729 | if ((baudrate < 1) || (baudrate > 4)) | |
3730 | tiosp->c_cflag &= ~CBAUDEX; | |
3731 | else | |
3732 | baudrate += 15; | |
3733 | } | |
3734 | baudrate = stl_baudrates[baudrate]; | |
3735 | if ((tiosp->c_cflag & CBAUD) == B38400) { | |
f8ae4764 | 3736 | if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) |
1da177e4 | 3737 | baudrate = 57600; |
f8ae4764 | 3738 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) |
1da177e4 | 3739 | baudrate = 115200; |
f8ae4764 | 3740 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) |
1da177e4 | 3741 | baudrate = 230400; |
f8ae4764 | 3742 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) |
1da177e4 | 3743 | baudrate = 460800; |
f8ae4764 | 3744 | else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) |
1da177e4 LT |
3745 | baudrate = (portp->baud_base / portp->custom_divisor); |
3746 | } | |
3747 | if (baudrate > STL_SC26198MAXBAUD) | |
3748 | baudrate = STL_SC26198MAXBAUD; | |
3749 | ||
c62429d9 JS |
3750 | if (baudrate > 0) |
3751 | for (clk = 0; clk < SC26198_NRBAUDS; clk++) | |
1da177e4 LT |
3752 | if (baudrate <= sc26198_baudtable[clk]) |
3753 | break; | |
1da177e4 LT |
3754 | |
3755 | /* | |
3756 | * Check what form of modem signaling is required and set it up. | |
3757 | */ | |
3758 | if (tiosp->c_cflag & CLOCAL) { | |
f8ae4764 | 3759 | portp->port.flags &= ~ASYNC_CHECK_CD; |
1da177e4 LT |
3760 | } else { |
3761 | iopr |= IOPR_DCDCOS; | |
3762 | imron |= IR_IOPORT; | |
f8ae4764 | 3763 | portp->port.flags |= ASYNC_CHECK_CD; |
1da177e4 LT |
3764 | } |
3765 | ||
3766 | /* | |
3767 | * Setup sc26198 enhanced modes if we can. In particular we want to | |
3768 | * handle as much of the flow control as possible automatically. As | |
3769 | * well as saving a few CPU cycles it will also greatly improve flow | |
3770 | * control reliability. | |
3771 | */ | |
3772 | if (tiosp->c_iflag & IXON) { | |
3773 | mr0 |= MR0_SWFTX | MR0_SWFT; | |
3774 | imron |= IR_XONXOFF; | |
c62429d9 | 3775 | } else |
1da177e4 | 3776 | imroff |= IR_XONXOFF; |
c62429d9 | 3777 | |
1da177e4 LT |
3778 | if (tiosp->c_iflag & IXOFF) |
3779 | mr0 |= MR0_SWFRX; | |
3780 | ||
3781 | if (tiosp->c_cflag & CRTSCTS) { | |
3782 | mr2 |= MR2_AUTOCTS; | |
3783 | mr1 |= MR1_AUTORTS; | |
3784 | } | |
3785 | ||
3786 | /* | |
3787 | * All sc26198 register values calculated so go through and set | |
3788 | * them all up. | |
3789 | */ | |
3790 | ||
a0564e14 | 3791 | pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", |
1da177e4 | 3792 | portp->portnr, portp->panelnr, portp->brdnr); |
a0564e14 JS |
3793 | pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk); |
3794 | pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff); | |
3795 | pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", | |
1da177e4 LT |
3796 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], |
3797 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); | |
1da177e4 | 3798 | |
b65b5b59 | 3799 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3800 | BRDENABLE(portp->brdnr, portp->pagenr); |
3801 | stl_sc26198setreg(portp, IMR, 0); | |
3802 | stl_sc26198updatereg(portp, MR0, mr0); | |
3803 | stl_sc26198updatereg(portp, MR1, mr1); | |
3804 | stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK); | |
3805 | stl_sc26198updatereg(portp, MR2, mr2); | |
3806 | stl_sc26198updatereg(portp, IOPIOR, | |
3807 | ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr)); | |
3808 | ||
3809 | if (baudrate > 0) { | |
3810 | stl_sc26198setreg(portp, TXCSR, clk); | |
3811 | stl_sc26198setreg(portp, RXCSR, clk); | |
3812 | } | |
3813 | ||
3814 | stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]); | |
3815 | stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]); | |
3816 | ||
3817 | ipr = stl_sc26198getreg(portp, IPR); | |
3818 | if (ipr & IPR_DCD) | |
3819 | portp->sigs &= ~TIOCM_CD; | |
3820 | else | |
3821 | portp->sigs |= TIOCM_CD; | |
3822 | ||
3823 | portp->imr = (portp->imr & ~imroff) | imron; | |
3824 | stl_sc26198setreg(portp, IMR, portp->imr); | |
3825 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3826 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3827 | } |
3828 | ||
3829 | /*****************************************************************************/ | |
3830 | ||
3831 | /* | |
3832 | * Set the state of the DTR and RTS signals. | |
3833 | */ | |
3834 | ||
ca7ed0f2 | 3835 | static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts) |
1da177e4 LT |
3836 | { |
3837 | unsigned char iopioron, iopioroff; | |
3838 | unsigned long flags; | |
3839 | ||
a0564e14 JS |
3840 | pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp, |
3841 | dtr, rts); | |
1da177e4 LT |
3842 | |
3843 | iopioron = 0; | |
3844 | iopioroff = 0; | |
3845 | if (dtr == 0) | |
3846 | iopioroff |= IPR_DTR; | |
3847 | else if (dtr > 0) | |
3848 | iopioron |= IPR_DTR; | |
3849 | if (rts == 0) | |
3850 | iopioroff |= IPR_RTS; | |
3851 | else if (rts > 0) | |
3852 | iopioron |= IPR_RTS; | |
3853 | ||
b65b5b59 | 3854 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3855 | BRDENABLE(portp->brdnr, portp->pagenr); |
3856 | stl_sc26198setreg(portp, IOPIOR, | |
3857 | ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron)); | |
3858 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3859 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3860 | } |
3861 | ||
3862 | /*****************************************************************************/ | |
3863 | ||
3864 | /* | |
3865 | * Return the state of the signals. | |
3866 | */ | |
3867 | ||
ca7ed0f2 | 3868 | static int stl_sc26198getsignals(struct stlport *portp) |
1da177e4 LT |
3869 | { |
3870 | unsigned char ipr; | |
3871 | unsigned long flags; | |
3872 | int sigs; | |
3873 | ||
a0564e14 | 3874 | pr_debug("stl_sc26198getsignals(portp=%p)\n", portp); |
1da177e4 | 3875 | |
b65b5b59 | 3876 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3877 | BRDENABLE(portp->brdnr, portp->pagenr); |
3878 | ipr = stl_sc26198getreg(portp, IPR); | |
3879 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3880 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3881 | |
3882 | sigs = 0; | |
3883 | sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD; | |
3884 | sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS; | |
3885 | sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR; | |
3886 | sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS; | |
3887 | sigs |= TIOCM_DSR; | |
014c2544 | 3888 | return sigs; |
1da177e4 LT |
3889 | } |
3890 | ||
3891 | /*****************************************************************************/ | |
3892 | ||
3893 | /* | |
3894 | * Enable/Disable the Transmitter and/or Receiver. | |
3895 | */ | |
3896 | ||
ca7ed0f2 | 3897 | static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx) |
1da177e4 LT |
3898 | { |
3899 | unsigned char ccr; | |
3900 | unsigned long flags; | |
3901 | ||
a0564e14 | 3902 | pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx); |
1da177e4 LT |
3903 | |
3904 | ccr = portp->crenable; | |
3905 | if (tx == 0) | |
3906 | ccr &= ~CR_TXENABLE; | |
3907 | else if (tx > 0) | |
3908 | ccr |= CR_TXENABLE; | |
3909 | if (rx == 0) | |
3910 | ccr &= ~CR_RXENABLE; | |
3911 | else if (rx > 0) | |
3912 | ccr |= CR_RXENABLE; | |
3913 | ||
b65b5b59 | 3914 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3915 | BRDENABLE(portp->brdnr, portp->pagenr); |
3916 | stl_sc26198setreg(portp, SCCR, ccr); | |
3917 | BRDDISABLE(portp->brdnr); | |
3918 | portp->crenable = ccr; | |
b65b5b59 | 3919 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3920 | } |
3921 | ||
3922 | /*****************************************************************************/ | |
3923 | ||
3924 | /* | |
3925 | * Start/stop the Transmitter and/or Receiver. | |
3926 | */ | |
3927 | ||
ca7ed0f2 | 3928 | static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx) |
1da177e4 LT |
3929 | { |
3930 | unsigned char imr; | |
3931 | unsigned long flags; | |
3932 | ||
a0564e14 | 3933 | pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); |
1da177e4 LT |
3934 | |
3935 | imr = portp->imr; | |
3936 | if (tx == 0) | |
3937 | imr &= ~IR_TXRDY; | |
3938 | else if (tx == 1) | |
3939 | imr |= IR_TXRDY; | |
3940 | if (rx == 0) | |
3941 | imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG); | |
3942 | else if (rx > 0) | |
3943 | imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG; | |
3944 | ||
b65b5b59 | 3945 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3946 | BRDENABLE(portp->brdnr, portp->pagenr); |
3947 | stl_sc26198setreg(portp, IMR, imr); | |
3948 | BRDDISABLE(portp->brdnr); | |
3949 | portp->imr = imr; | |
3950 | if (tx > 0) | |
3951 | set_bit(ASYI_TXBUSY, &portp->istate); | |
b65b5b59 | 3952 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3953 | } |
3954 | ||
3955 | /*****************************************************************************/ | |
3956 | ||
3957 | /* | |
3958 | * Disable all interrupts from this port. | |
3959 | */ | |
3960 | ||
ca7ed0f2 | 3961 | static void stl_sc26198disableintrs(struct stlport *portp) |
1da177e4 LT |
3962 | { |
3963 | unsigned long flags; | |
3964 | ||
a0564e14 | 3965 | pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp); |
1da177e4 | 3966 | |
b65b5b59 | 3967 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3968 | BRDENABLE(portp->brdnr, portp->pagenr); |
3969 | portp->imr = 0; | |
3970 | stl_sc26198setreg(portp, IMR, 0); | |
3971 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 3972 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3973 | } |
3974 | ||
3975 | /*****************************************************************************/ | |
3976 | ||
ca7ed0f2 | 3977 | static void stl_sc26198sendbreak(struct stlport *portp, int len) |
1da177e4 LT |
3978 | { |
3979 | unsigned long flags; | |
3980 | ||
a0564e14 | 3981 | pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len); |
1da177e4 | 3982 | |
b65b5b59 | 3983 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
3984 | BRDENABLE(portp->brdnr, portp->pagenr); |
3985 | if (len == 1) { | |
3986 | stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK); | |
3987 | portp->stats.txbreaks++; | |
c62429d9 | 3988 | } else |
1da177e4 | 3989 | stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK); |
c62429d9 | 3990 | |
1da177e4 | 3991 | BRDDISABLE(portp->brdnr); |
b65b5b59 | 3992 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
3993 | } |
3994 | ||
3995 | /*****************************************************************************/ | |
3996 | ||
3997 | /* | |
3998 | * Take flow control actions... | |
3999 | */ | |
4000 | ||
ca7ed0f2 | 4001 | static void stl_sc26198flowctrl(struct stlport *portp, int state) |
1da177e4 LT |
4002 | { |
4003 | struct tty_struct *tty; | |
4004 | unsigned long flags; | |
4005 | unsigned char mr0; | |
4006 | ||
a0564e14 | 4007 | pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state); |
1da177e4 | 4008 | |
615e4a71 | 4009 | if (portp == NULL) |
1da177e4 | 4010 | return; |
d18a750f | 4011 | tty = tty_port_tty_get(&portp->port); |
615e4a71 | 4012 | if (tty == NULL) |
1da177e4 LT |
4013 | return; |
4014 | ||
b65b5b59 | 4015 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
4016 | BRDENABLE(portp->brdnr, portp->pagenr); |
4017 | ||
4018 | if (state) { | |
4019 | if (tty->termios->c_iflag & IXOFF) { | |
4020 | mr0 = stl_sc26198getreg(portp, MR0); | |
4021 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4022 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); | |
4023 | mr0 |= MR0_SWFRX; | |
4024 | portp->stats.rxxon++; | |
4025 | stl_sc26198wait(portp); | |
4026 | stl_sc26198setreg(portp, MR0, mr0); | |
4027 | } | |
4028 | /* | |
4029 | * Question: should we return RTS to what it was before? It may | |
4030 | * have been set by an ioctl... Suppose not, since if you have | |
4031 | * hardware flow control set then it is pretty silly to go and | |
4032 | * set the RTS line by hand. | |
4033 | */ | |
4034 | if (tty->termios->c_cflag & CRTSCTS) { | |
4035 | stl_sc26198setreg(portp, MR1, | |
4036 | (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS)); | |
4037 | stl_sc26198setreg(portp, IOPIOR, | |
4038 | (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS)); | |
4039 | portp->stats.rxrtson++; | |
4040 | } | |
4041 | } else { | |
4042 | if (tty->termios->c_iflag & IXOFF) { | |
4043 | mr0 = stl_sc26198getreg(portp, MR0); | |
4044 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4045 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); | |
4046 | mr0 &= ~MR0_SWFRX; | |
4047 | portp->stats.rxxoff++; | |
4048 | stl_sc26198wait(portp); | |
4049 | stl_sc26198setreg(portp, MR0, mr0); | |
4050 | } | |
4051 | if (tty->termios->c_cflag & CRTSCTS) { | |
4052 | stl_sc26198setreg(portp, MR1, | |
4053 | (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS)); | |
4054 | stl_sc26198setreg(portp, IOPIOR, | |
4055 | (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS)); | |
4056 | portp->stats.rxrtsoff++; | |
4057 | } | |
4058 | } | |
4059 | ||
4060 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 4061 | spin_unlock_irqrestore(&brd_lock, flags); |
d18a750f | 4062 | tty_kref_put(tty); |
1da177e4 LT |
4063 | } |
4064 | ||
4065 | /*****************************************************************************/ | |
4066 | ||
4067 | /* | |
4068 | * Send a flow control character. | |
4069 | */ | |
4070 | ||
ca7ed0f2 | 4071 | static void stl_sc26198sendflow(struct stlport *portp, int state) |
1da177e4 LT |
4072 | { |
4073 | struct tty_struct *tty; | |
4074 | unsigned long flags; | |
4075 | unsigned char mr0; | |
4076 | ||
a0564e14 | 4077 | pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state); |
1da177e4 | 4078 | |
615e4a71 | 4079 | if (portp == NULL) |
1da177e4 | 4080 | return; |
d18a750f | 4081 | tty = tty_port_tty_get(&portp->port); |
615e4a71 | 4082 | if (tty == NULL) |
1da177e4 LT |
4083 | return; |
4084 | ||
b65b5b59 | 4085 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
4086 | BRDENABLE(portp->brdnr, portp->pagenr); |
4087 | if (state) { | |
4088 | mr0 = stl_sc26198getreg(portp, MR0); | |
4089 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4090 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); | |
4091 | mr0 |= MR0_SWFRX; | |
4092 | portp->stats.rxxon++; | |
4093 | stl_sc26198wait(portp); | |
4094 | stl_sc26198setreg(portp, MR0, mr0); | |
4095 | } else { | |
4096 | mr0 = stl_sc26198getreg(portp, MR0); | |
4097 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4098 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); | |
4099 | mr0 &= ~MR0_SWFRX; | |
4100 | portp->stats.rxxoff++; | |
4101 | stl_sc26198wait(portp); | |
4102 | stl_sc26198setreg(portp, MR0, mr0); | |
4103 | } | |
4104 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 4105 | spin_unlock_irqrestore(&brd_lock, flags); |
d18a750f | 4106 | tty_kref_put(tty); |
1da177e4 LT |
4107 | } |
4108 | ||
4109 | /*****************************************************************************/ | |
4110 | ||
ca7ed0f2 | 4111 | static void stl_sc26198flush(struct stlport *portp) |
1da177e4 LT |
4112 | { |
4113 | unsigned long flags; | |
4114 | ||
a0564e14 | 4115 | pr_debug("stl_sc26198flush(portp=%p)\n", portp); |
1da177e4 | 4116 | |
615e4a71 | 4117 | if (portp == NULL) |
1da177e4 LT |
4118 | return; |
4119 | ||
b65b5b59 | 4120 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
4121 | BRDENABLE(portp->brdnr, portp->pagenr); |
4122 | stl_sc26198setreg(portp, SCCR, CR_TXRESET); | |
4123 | stl_sc26198setreg(portp, SCCR, portp->crenable); | |
4124 | BRDDISABLE(portp->brdnr); | |
4125 | portp->tx.tail = portp->tx.head; | |
b65b5b59 | 4126 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 LT |
4127 | } |
4128 | ||
4129 | /*****************************************************************************/ | |
4130 | ||
4131 | /* | |
4132 | * Return the current state of data flow on this port. This is only | |
6f0b31c3 | 4133 | * really interesting when determining if data has fully completed |
1da177e4 LT |
4134 | * transmission or not... The sc26198 interrupt scheme cannot |
4135 | * determine when all data has actually drained, so we need to | |
4136 | * check the port statusy register to be sure. | |
4137 | */ | |
4138 | ||
ca7ed0f2 | 4139 | static int stl_sc26198datastate(struct stlport *portp) |
1da177e4 LT |
4140 | { |
4141 | unsigned long flags; | |
4142 | unsigned char sr; | |
4143 | ||
a0564e14 | 4144 | pr_debug("stl_sc26198datastate(portp=%p)\n", portp); |
1da177e4 | 4145 | |
615e4a71 | 4146 | if (portp == NULL) |
014c2544 | 4147 | return 0; |
1da177e4 | 4148 | if (test_bit(ASYI_TXBUSY, &portp->istate)) |
014c2544 | 4149 | return 1; |
1da177e4 | 4150 | |
b65b5b59 | 4151 | spin_lock_irqsave(&brd_lock, flags); |
1da177e4 LT |
4152 | BRDENABLE(portp->brdnr, portp->pagenr); |
4153 | sr = stl_sc26198getreg(portp, SR); | |
4154 | BRDDISABLE(portp->brdnr); | |
b65b5b59 | 4155 | spin_unlock_irqrestore(&brd_lock, flags); |
1da177e4 | 4156 | |
014c2544 | 4157 | return (sr & SR_TXEMPTY) ? 0 : 1; |
1da177e4 LT |
4158 | } |
4159 | ||
4160 | /*****************************************************************************/ | |
4161 | ||
4162 | /* | |
4163 | * Delay for a small amount of time, to give the sc26198 a chance | |
4164 | * to process a command... | |
4165 | */ | |
4166 | ||
ca7ed0f2 | 4167 | static void stl_sc26198wait(struct stlport *portp) |
1da177e4 LT |
4168 | { |
4169 | int i; | |
4170 | ||
a0564e14 | 4171 | pr_debug("stl_sc26198wait(portp=%p)\n", portp); |
1da177e4 | 4172 | |
615e4a71 | 4173 | if (portp == NULL) |
1da177e4 LT |
4174 | return; |
4175 | ||
c62429d9 | 4176 | for (i = 0; i < 20; i++) |
1da177e4 LT |
4177 | stl_sc26198getglobreg(portp, TSTR); |
4178 | } | |
4179 | ||
4180 | /*****************************************************************************/ | |
4181 | ||
4182 | /* | |
4183 | * If we are TX flow controlled and in IXANY mode then we may | |
4184 | * need to unflow control here. We gotta do this because of the | |
4185 | * automatic flow control modes of the sc26198. | |
4186 | */ | |
4187 | ||
60be4810 | 4188 | static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty) |
1da177e4 LT |
4189 | { |
4190 | unsigned char mr0; | |
4191 | ||
4192 | mr0 = stl_sc26198getreg(portp, MR0); | |
4193 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4194 | stl_sc26198setreg(portp, SCCR, CR_HOSTXON); | |
4195 | stl_sc26198wait(portp); | |
4196 | stl_sc26198setreg(portp, MR0, mr0); | |
4197 | clear_bit(ASYI_TXFLOWED, &portp->istate); | |
4198 | } | |
4199 | ||
4200 | /*****************************************************************************/ | |
4201 | ||
4202 | /* | |
4203 | * Interrupt service routine for sc26198 panels. | |
4204 | */ | |
4205 | ||
ca7ed0f2 | 4206 | static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase) |
1da177e4 | 4207 | { |
ca7ed0f2 | 4208 | struct stlport *portp; |
1da177e4 LT |
4209 | unsigned int iack; |
4210 | ||
b65b5b59 AC |
4211 | spin_lock(&brd_lock); |
4212 | ||
1da177e4 LT |
4213 | /* |
4214 | * Work around bug in sc26198 chip... Cannot have A6 address | |
4215 | * line of UART high, else iack will be returned as 0. | |
4216 | */ | |
4217 | outb(0, (iobase + 1)); | |
4218 | ||
4219 | iack = inb(iobase + XP_IACK); | |
4220 | portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)]; | |
4221 | ||
4222 | if (iack & IVR_RXDATA) | |
4223 | stl_sc26198rxisr(portp, iack); | |
4224 | else if (iack & IVR_TXDATA) | |
4225 | stl_sc26198txisr(portp); | |
4226 | else | |
4227 | stl_sc26198otherisr(portp, iack); | |
b65b5b59 AC |
4228 | |
4229 | spin_unlock(&brd_lock); | |
1da177e4 LT |
4230 | } |
4231 | ||
4232 | /*****************************************************************************/ | |
4233 | ||
4234 | /* | |
4235 | * Transmit interrupt handler. This has gotta be fast! Handling TX | |
4236 | * chars is pretty simple, stuff as many as possible from the TX buffer | |
4237 | * into the sc26198 FIFO. | |
4238 | * In practice it is possible that interrupts are enabled but that the | |
4239 | * port has been hung up. Need to handle not having any TX buffer here, | |
4240 | * this is done by using the side effect that head and tail will also | |
4241 | * be NULL if the buffer has been freed. | |
4242 | */ | |
4243 | ||
ca7ed0f2 | 4244 | static void stl_sc26198txisr(struct stlport *portp) |
1da177e4 | 4245 | { |
d18a750f | 4246 | struct tty_struct *tty; |
1da177e4 LT |
4247 | unsigned int ioaddr; |
4248 | unsigned char mr0; | |
4249 | int len, stlen; | |
4250 | char *head, *tail; | |
4251 | ||
a0564e14 | 4252 | pr_debug("stl_sc26198txisr(portp=%p)\n", portp); |
1da177e4 LT |
4253 | |
4254 | ioaddr = portp->ioaddr; | |
4255 | head = portp->tx.head; | |
4256 | tail = portp->tx.tail; | |
4257 | len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
4258 | if ((len == 0) || ((len < STL_TXBUFLOW) && | |
4259 | (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { | |
4260 | set_bit(ASYI_TXLOW, &portp->istate); | |
d18a750f AC |
4261 | tty = tty_port_tty_get(&portp->port); |
4262 | if (tty) { | |
4263 | tty_wakeup(tty); | |
4264 | tty_kref_put(tty); | |
4265 | } | |
1da177e4 LT |
4266 | } |
4267 | ||
4268 | if (len == 0) { | |
4269 | outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR)); | |
4270 | mr0 = inb(ioaddr + XP_DATA); | |
4271 | if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) { | |
4272 | portp->imr &= ~IR_TXRDY; | |
4273 | outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR)); | |
4274 | outb(portp->imr, (ioaddr + XP_DATA)); | |
4275 | clear_bit(ASYI_TXBUSY, &portp->istate); | |
4276 | } else { | |
4277 | mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY); | |
4278 | outb(mr0, (ioaddr + XP_DATA)); | |
4279 | } | |
4280 | } else { | |
843b568c | 4281 | len = min(len, SC26198_TXFIFOSIZE); |
1da177e4 | 4282 | portp->stats.txtotal += len; |
319fe7c3 JS |
4283 | stlen = min_t(unsigned int, len, |
4284 | (portp->tx.buf + STL_TXBUFSIZE) - tail); | |
1da177e4 LT |
4285 | outb(GTXFIFO, (ioaddr + XP_ADDR)); |
4286 | outsb((ioaddr + XP_DATA), tail, stlen); | |
4287 | len -= stlen; | |
4288 | tail += stlen; | |
4289 | if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) | |
4290 | tail = portp->tx.buf; | |
4291 | if (len > 0) { | |
4292 | outsb((ioaddr + XP_DATA), tail, len); | |
4293 | tail += len; | |
4294 | } | |
4295 | portp->tx.tail = tail; | |
4296 | } | |
4297 | } | |
4298 | ||
4299 | /*****************************************************************************/ | |
4300 | ||
4301 | /* | |
4302 | * Receive character interrupt handler. Determine if we have good chars | |
4303 | * or bad chars and then process appropriately. Good chars are easy | |
4304 | * just shove the lot into the RX buffer and set all status byte to 0. | |
4305 | * If a bad RX char then process as required. This routine needs to be | |
4306 | * fast! In practice it is possible that we get an interrupt on a port | |
4307 | * that is closed. This can happen on hangups - since they completely | |
4308 | * shutdown a port not in user context. Need to handle this case. | |
4309 | */ | |
4310 | ||
ca7ed0f2 | 4311 | static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) |
1da177e4 LT |
4312 | { |
4313 | struct tty_struct *tty; | |
4314 | unsigned int len, buflen, ioaddr; | |
4315 | ||
a0564e14 | 4316 | pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack); |
1da177e4 | 4317 | |
d18a750f | 4318 | tty = tty_port_tty_get(&portp->port); |
1da177e4 LT |
4319 | ioaddr = portp->ioaddr; |
4320 | outb(GIBCR, (ioaddr + XP_ADDR)); | |
4321 | len = inb(ioaddr + XP_DATA) + 1; | |
4322 | ||
4323 | if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { | |
33f0f88f | 4324 | if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { |
319fe7c3 | 4325 | len = min_t(unsigned int, len, sizeof(stl_unwanted)); |
1da177e4 LT |
4326 | outb(GRXFIFO, (ioaddr + XP_ADDR)); |
4327 | insb((ioaddr + XP_DATA), &stl_unwanted[0], len); | |
4328 | portp->stats.rxlost += len; | |
4329 | portp->stats.rxtotal += len; | |
4330 | } else { | |
843b568c | 4331 | len = min(len, buflen); |
1da177e4 | 4332 | if (len > 0) { |
33f0f88f | 4333 | unsigned char *ptr; |
1da177e4 | 4334 | outb(GRXFIFO, (ioaddr + XP_ADDR)); |
33f0f88f AC |
4335 | tty_prepare_flip_string(tty, &ptr, len); |
4336 | insb((ioaddr + XP_DATA), ptr, len); | |
1da177e4 LT |
4337 | tty_schedule_flip(tty); |
4338 | portp->stats.rxtotal += len; | |
4339 | } | |
4340 | } | |
4341 | } else { | |
4342 | stl_sc26198rxbadchars(portp); | |
4343 | } | |
4344 | ||
4345 | /* | |
4346 | * If we are TX flow controlled and in IXANY mode then we may need | |
4347 | * to unflow control here. We gotta do this because of the automatic | |
4348 | * flow control modes of the sc26198. | |
4349 | */ | |
4350 | if (test_bit(ASYI_TXFLOWED, &portp->istate)) { | |
615e4a71 JS |
4351 | if ((tty != NULL) && |
4352 | (tty->termios != NULL) && | |
1da177e4 LT |
4353 | (tty->termios->c_iflag & IXANY)) { |
4354 | stl_sc26198txunflow(portp, tty); | |
4355 | } | |
4356 | } | |
d18a750f | 4357 | tty_kref_put(tty); |
1da177e4 LT |
4358 | } |
4359 | ||
4360 | /*****************************************************************************/ | |
4361 | ||
4362 | /* | |
4363 | * Process an RX bad character. | |
4364 | */ | |
4365 | ||
60be4810 | 4366 | static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch) |
1da177e4 LT |
4367 | { |
4368 | struct tty_struct *tty; | |
4369 | unsigned int ioaddr; | |
4370 | ||
d18a750f | 4371 | tty = tty_port_tty_get(&portp->port); |
1da177e4 LT |
4372 | ioaddr = portp->ioaddr; |
4373 | ||
4374 | if (status & SR_RXPARITY) | |
4375 | portp->stats.rxparity++; | |
4376 | if (status & SR_RXFRAMING) | |
4377 | portp->stats.rxframing++; | |
4378 | if (status & SR_RXOVERRUN) | |
4379 | portp->stats.rxoverrun++; | |
4380 | if (status & SR_RXBREAK) | |
4381 | portp->stats.rxbreaks++; | |
4382 | ||
615e4a71 | 4383 | if ((tty != NULL) && |
1da177e4 LT |
4384 | ((portp->rxignoremsk & status) == 0)) { |
4385 | if (portp->rxmarkmsk & status) { | |
4386 | if (status & SR_RXBREAK) { | |
4387 | status = TTY_BREAK; | |
f8ae4764 | 4388 | if (portp->port.flags & ASYNC_SAK) { |
1da177e4 LT |
4389 | do_SAK(tty); |
4390 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4391 | } | |
c62429d9 | 4392 | } else if (status & SR_RXPARITY) |
1da177e4 | 4393 | status = TTY_PARITY; |
c62429d9 | 4394 | else if (status & SR_RXFRAMING) |
1da177e4 | 4395 | status = TTY_FRAME; |
c62429d9 | 4396 | else if(status & SR_RXOVERRUN) |
1da177e4 | 4397 | status = TTY_OVERRUN; |
c62429d9 | 4398 | else |
1da177e4 | 4399 | status = 0; |
c62429d9 | 4400 | } else |
1da177e4 | 4401 | status = 0; |
1da177e4 | 4402 | |
33f0f88f AC |
4403 | tty_insert_flip_char(tty, ch, status); |
4404 | tty_schedule_flip(tty); | |
1da177e4 LT |
4405 | |
4406 | if (status == 0) | |
4407 | portp->stats.rxtotal++; | |
4408 | } | |
d18a750f | 4409 | tty_kref_put(tty); |
1da177e4 LT |
4410 | } |
4411 | ||
4412 | /*****************************************************************************/ | |
4413 | ||
4414 | /* | |
4415 | * Process all characters in the RX FIFO of the UART. Check all char | |
4416 | * status bytes as well, and process as required. We need to check | |
4417 | * all bytes in the FIFO, in case some more enter the FIFO while we | |
4418 | * are here. To get the exact character error type we need to switch | |
4419 | * into CHAR error mode (that is why we need to make sure we empty | |
4420 | * the FIFO). | |
4421 | */ | |
4422 | ||
ca7ed0f2 | 4423 | static void stl_sc26198rxbadchars(struct stlport *portp) |
1da177e4 LT |
4424 | { |
4425 | unsigned char status, mr1; | |
4426 | char ch; | |
4427 | ||
4428 | /* | |
4429 | * To get the precise error type for each character we must switch | |
4430 | * back into CHAR error mode. | |
4431 | */ | |
4432 | mr1 = stl_sc26198getreg(portp, MR1); | |
4433 | stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK)); | |
4434 | ||
4435 | while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) { | |
4436 | stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR); | |
4437 | ch = stl_sc26198getreg(portp, RXFIFO); | |
4438 | stl_sc26198rxbadch(portp, status, ch); | |
4439 | } | |
4440 | ||
4441 | /* | |
4442 | * To get correct interrupt class we must switch back into BLOCK | |
4443 | * error mode. | |
4444 | */ | |
4445 | stl_sc26198setreg(portp, MR1, mr1); | |
4446 | } | |
4447 | ||
4448 | /*****************************************************************************/ | |
4449 | ||
4450 | /* | |
4451 | * Other interrupt handler. This includes modem signals, flow | |
4452 | * control actions, etc. Most stuff is left to off-level interrupt | |
4453 | * processing time. | |
4454 | */ | |
4455 | ||
ca7ed0f2 | 4456 | static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) |
1da177e4 LT |
4457 | { |
4458 | unsigned char cir, ipr, xisr; | |
4459 | ||
a0564e14 | 4460 | pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack); |
1da177e4 LT |
4461 | |
4462 | cir = stl_sc26198getglobreg(portp, CIR); | |
4463 | ||
4464 | switch (cir & CIR_SUBTYPEMASK) { | |
4465 | case CIR_SUBCOS: | |
4466 | ipr = stl_sc26198getreg(portp, IPR); | |
4467 | if (ipr & IPR_DCDCHANGE) { | |
ccfea3c9 | 4468 | stl_cd_change(portp); |
1da177e4 LT |
4469 | portp->stats.modem++; |
4470 | } | |
4471 | break; | |
4472 | case CIR_SUBXONXOFF: | |
4473 | xisr = stl_sc26198getreg(portp, XISR); | |
4474 | if (xisr & XISR_RXXONGOT) { | |
4475 | set_bit(ASYI_TXFLOWED, &portp->istate); | |
4476 | portp->stats.txxoff++; | |
4477 | } | |
4478 | if (xisr & XISR_RXXOFFGOT) { | |
4479 | clear_bit(ASYI_TXFLOWED, &portp->istate); | |
4480 | portp->stats.txxon++; | |
4481 | } | |
4482 | break; | |
4483 | case CIR_SUBBREAK: | |
4484 | stl_sc26198setreg(portp, SCCR, CR_BREAKRESET); | |
4485 | stl_sc26198rxbadchars(portp); | |
4486 | break; | |
4487 | default: | |
4488 | break; | |
4489 | } | |
4490 | } | |
4491 | ||
fc06b5cf JS |
4492 | static void stl_free_isabrds(void) |
4493 | { | |
4494 | struct stlbrd *brdp; | |
4495 | unsigned int i; | |
4496 | ||
4497 | for (i = 0; i < stl_nrbrds; i++) { | |
4498 | if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) | |
4499 | continue; | |
4500 | ||
4501 | free_irq(brdp->irq, brdp); | |
4502 | ||
4503 | stl_cleanup_panels(brdp); | |
4504 | ||
4505 | release_region(brdp->ioaddr1, brdp->iosize1); | |
4506 | if (brdp->iosize2 > 0) | |
4507 | release_region(brdp->ioaddr2, brdp->iosize2); | |
4508 | ||
4509 | kfree(brdp); | |
4510 | stl_brds[i] = NULL; | |
4511 | } | |
4512 | } | |
4513 | ||
23b85a15 JS |
4514 | /* |
4515 | * Loadable module initialization stuff. | |
4516 | */ | |
4517 | static int __init stallion_module_init(void) | |
4518 | { | |
843b568c JS |
4519 | struct stlbrd *brdp; |
4520 | struct stlconf conf; | |
aeaccfe4 | 4521 | unsigned int i, j; |
fc06b5cf | 4522 | int retval; |
23b85a15 JS |
4523 | |
4524 | printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion); | |
4525 | ||
4526 | spin_lock_init(&stallion_lock); | |
4527 | spin_lock_init(&brd_lock); | |
4528 | ||
e415109f JS |
4529 | stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); |
4530 | if (!stl_serial) { | |
4531 | retval = -ENOMEM; | |
4532 | goto err; | |
4533 | } | |
4534 | ||
4535 | stl_serial->owner = THIS_MODULE; | |
4536 | stl_serial->driver_name = stl_drvname; | |
4537 | stl_serial->name = "ttyE"; | |
4538 | stl_serial->major = STL_SERIALMAJOR; | |
4539 | stl_serial->minor_start = 0; | |
4540 | stl_serial->type = TTY_DRIVER_TYPE_SERIAL; | |
4541 | stl_serial->subtype = SERIAL_TYPE_NORMAL; | |
4542 | stl_serial->init_termios = stl_deftermios; | |
4543 | stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; | |
4544 | tty_set_operations(stl_serial, &stl_ops); | |
4545 | ||
4546 | retval = tty_register_driver(stl_serial); | |
4547 | if (retval) { | |
4548 | printk("STALLION: failed to register serial driver\n"); | |
4549 | goto err_frtty; | |
4550 | } | |
4551 | ||
843b568c JS |
4552 | /* |
4553 | * Find any dynamically supported boards. That is via module load | |
4554 | * line options. | |
4555 | */ | |
4556 | for (i = stl_nrbrds; i < stl_nargs; i++) { | |
4557 | memset(&conf, 0, sizeof(conf)); | |
4558 | if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) | |
4559 | continue; | |
4560 | if ((brdp = stl_allocbrd()) == NULL) | |
4561 | continue; | |
4562 | brdp->brdnr = i; | |
4563 | brdp->brdtype = conf.brdtype; | |
4564 | brdp->ioaddr1 = conf.ioaddr1; | |
4565 | brdp->ioaddr2 = conf.ioaddr2; | |
4566 | brdp->irq = conf.irq; | |
4567 | brdp->irqtype = conf.irqtype; | |
b08b5ad9 IK |
4568 | stl_brds[brdp->brdnr] = brdp; |
4569 | if (stl_brdinit(brdp)) { | |
4570 | stl_brds[brdp->brdnr] = NULL; | |
843b568c | 4571 | kfree(brdp); |
b08b5ad9 | 4572 | } else { |
aeaccfe4 JS |
4573 | for (j = 0; j < brdp->nrports; j++) |
4574 | tty_register_device(stl_serial, | |
4575 | brdp->brdnr * STL_MAXPORTS + j, NULL); | |
843b568c | 4576 | stl_nrbrds = i + 1; |
79cfe7ab | 4577 | } |
843b568c | 4578 | } |
23b85a15 | 4579 | |
79cfe7ab | 4580 | /* this has to be _after_ isa finding because of locking */ |
b1b84fe0 | 4581 | retval = pci_register_driver(&stl_pcidriver); |
e415109f JS |
4582 | if (retval && stl_nrbrds == 0) { |
4583 | printk(KERN_ERR "STALLION: can't register pci driver\n"); | |
4584 | goto err_unrtty; | |
fc06b5cf | 4585 | } |
23b85a15 JS |
4586 | |
4587 | /* | |
4588 | * Set up a character driver for per board stuff. This is mainly used | |
4589 | * to do stats ioctls on the ports. | |
4590 | */ | |
4591 | if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem)) | |
4592 | printk("STALLION: failed to register serial board device\n"); | |
4593 | ||
4594 | stallion_class = class_create(THIS_MODULE, "staliomem"); | |
e415109f JS |
4595 | if (IS_ERR(stallion_class)) |
4596 | printk("STALLION: failed to create class\n"); | |
23b85a15 | 4597 | for (i = 0; i < 4; i++) |
03457cd4 GKH |
4598 | device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i), |
4599 | NULL, "staliomem%d", i); | |
23b85a15 | 4600 | |
23b85a15 | 4601 | return 0; |
e415109f JS |
4602 | err_unrtty: |
4603 | tty_unregister_driver(stl_serial); | |
4604 | err_frtty: | |
fc06b5cf | 4605 | put_tty_driver(stl_serial); |
b1b84fe0 JS |
4606 | err: |
4607 | return retval; | |
23b85a15 JS |
4608 | } |
4609 | ||
4610 | static void __exit stallion_module_exit(void) | |
4611 | { | |
aeaccfe4 JS |
4612 | struct stlbrd *brdp; |
4613 | unsigned int i, j; | |
23b85a15 JS |
4614 | |
4615 | pr_debug("cleanup_module()\n"); | |
4616 | ||
4617 | printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle, | |
4618 | stl_drvversion); | |
4619 | ||
4620 | /* | |
4621 | * Free up all allocated resources used by the ports. This includes | |
4622 | * memory and interrupts. As part of this process we will also do | |
4623 | * a hangup on every open port - to try to flush out any processes | |
4624 | * hanging onto ports. | |
4625 | */ | |
aeaccfe4 JS |
4626 | for (i = 0; i < stl_nrbrds; i++) { |
4627 | if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) | |
4628 | continue; | |
4629 | for (j = 0; j < brdp->nrports; j++) | |
4630 | tty_unregister_device(stl_serial, | |
4631 | brdp->brdnr * STL_MAXPORTS + j); | |
4632 | } | |
fc06b5cf | 4633 | |
23b85a15 | 4634 | for (i = 0; i < 4; i++) |
07c015e7 | 4635 | device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i)); |
68fc4fab | 4636 | unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); |
23b85a15 JS |
4637 | class_destroy(stallion_class); |
4638 | ||
b1b84fe0 JS |
4639 | pci_unregister_driver(&stl_pcidriver); |
4640 | ||
fc06b5cf | 4641 | stl_free_isabrds(); |
e415109f JS |
4642 | |
4643 | tty_unregister_driver(stl_serial); | |
4644 | put_tty_driver(stl_serial); | |
23b85a15 JS |
4645 | } |
4646 | ||
4647 | module_init(stallion_module_init); | |
4648 | module_exit(stallion_module_exit); | |
4649 | ||
4650 | MODULE_AUTHOR("Greg Ungerer"); | |
4651 | MODULE_DESCRIPTION("Stallion Multiport Serial Driver"); | |
4652 | MODULE_LICENSE("GPL"); |