]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * Copyright (C) 1995-1996 Linus Torvalds & authors (see below) |
3 | */ | |
4 | ||
5 | /* | |
6 | * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) | |
7 | * mlord@pobox.com (Mark Lord) | |
8 | * | |
9 | * See linux/MAINTAINERS for address of current maintainer. | |
10 | * | |
11 | * This file provides support for the advanced features and bugs | |
12 | * of IDE interfaces using the CMD Technologies 0640 IDE interface chip. | |
13 | * | |
14 | * These chips are basically fucked by design, and getting this driver | |
15 | * to work on every motherboard design that uses this screwed chip seems | |
16 | * bloody well impossible. However, we're still trying. | |
17 | * | |
18 | * Version 0.97 worked for everybody. | |
19 | * | |
20 | * User feedback is essential. Many thanks to the beta test team: | |
21 | * | |
22 | * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com, | |
23 | * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz, | |
24 | * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de, | |
25 | * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de, | |
26 | * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net, | |
27 | * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net, | |
28 | * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu, | |
29 | * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com, | |
30 | * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net, | |
31 | * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com | |
32 | * liug@mama.indstate.edu, and others. | |
33 | * | |
34 | * Version 0.01 Initial version, hacked out of ide.c, | |
35 | * and #include'd rather than compiled separately. | |
36 | * This will get cleaned up in a subsequent release. | |
37 | * | |
38 | * Version 0.02 Fixes for vlb initialization code, enable prefetch | |
39 | * for versions 'B' and 'C' of chip by default, | |
40 | * some code cleanup. | |
41 | * | |
42 | * Version 0.03 Added reset of secondary interface, | |
43 | * and black list for devices which are not compatible | |
44 | * with prefetch mode. Separate function for setting | |
45 | * prefetch is added, possibly it will be called some | |
46 | * day from ioctl processing code. | |
47 | * | |
48 | * Version 0.04 Now configs/compiles separate from ide.c | |
49 | * | |
50 | * Version 0.05 Major rewrite of interface timing code. | |
51 | * Added new function cmd640_set_mode to set PIO mode | |
52 | * from ioctl call. New drives added to black list. | |
53 | * | |
54 | * Version 0.06 More code cleanup. Prefetch is enabled only for | |
55 | * detected hard drives, not included in prefetch | |
56 | * black list. | |
57 | * | |
58 | * Version 0.07 Changed to more conservative drive tuning policy. | |
59 | * Unknown drives, which report PIO < 4 are set to | |
60 | * (reported_PIO - 1) if it is supported, or to PIO0. | |
61 | * List of known drives extended by info provided by | |
62 | * CMD at their ftp site. | |
63 | * | |
64 | * Version 0.08 Added autotune/noautotune support. | |
65 | * | |
66 | * Version 0.09 Try to be smarter about 2nd port enabling. | |
67 | * Version 0.10 Be nice and don't reset 2nd port. | |
68 | * Version 0.11 Try to handle more weird situations. | |
69 | * | |
70 | * Version 0.12 Lots of bug fixes from Laszlo Peter | |
71 | * irq unmasking disabled for reliability. | |
72 | * try to be even smarter about the second port. | |
73 | * tidy up source code formatting. | |
74 | * Version 0.13 permit irq unmasking again. | |
75 | * Version 0.90 massive code cleanup, some bugs fixed. | |
76 | * defaults all drives to PIO mode0, prefetch off. | |
77 | * autotune is OFF by default, with compile time flag. | |
78 | * prefetch can be turned OFF/ON using "hdparm -p8/-p9" | |
79 | * (requires hdparm-3.1 or newer) | |
80 | * Version 0.91 first release to linux-kernel list. | |
81 | * Version 0.92 move initial reg dump to separate callable function | |
82 | * change "readahead" to "prefetch" to avoid confusion | |
83 | * Version 0.95 respect original BIOS timings unless autotuning. | |
84 | * tons of code cleanup and rearrangement. | |
85 | * added CONFIG_BLK_DEV_CMD640_ENHANCED option | |
86 | * prevent use of unmask when prefetch is on | |
87 | * Version 0.96 prevent use of io_32bit when prefetch is off | |
88 | * Version 0.97 fix VLB secondary interface for sjd@slip.net | |
89 | * other minor tune-ups: 0.96 was very good. | |
90 | * Version 0.98 ignore PCI version when disabled by BIOS | |
91 | * Version 0.99 display setup/active/recovery clocks with PIO mode | |
92 | * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems | |
93 | * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7" | |
94 | * ("fast" is necessary for 32bit I/O in some systems) | |
95 | * Version 1.02 fix bug that resulted in slow "setup times" | |
96 | * (patch courtesy of Zoltan Hidvegi) | |
97 | */ | |
98 | ||
1da177e4 LT |
99 | #define CMD640_PREFETCH_MASKS 1 |
100 | ||
101 | //#define CMD640_DUMP_REGS | |
102 | ||
1da177e4 LT |
103 | #include <linux/types.h> |
104 | #include <linux/kernel.h> | |
105 | #include <linux/delay.h> | |
1da177e4 LT |
106 | #include <linux/hdreg.h> |
107 | #include <linux/ide.h> | |
108 | #include <linux/init.h> | |
109 | ||
110 | #include <asm/io.h> | |
111 | ||
112 | /* | |
113 | * This flag is set in ide.c by the parameter: ide0=cmd640_vlb | |
114 | */ | |
115 | int cmd640_vlb = 0; | |
116 | ||
117 | /* | |
118 | * CMD640 specific registers definition. | |
119 | */ | |
120 | ||
121 | #define VID 0x00 | |
122 | #define DID 0x02 | |
123 | #define PCMD 0x04 | |
124 | #define PCMD_ENA 0x01 | |
125 | #define PSTTS 0x06 | |
126 | #define REVID 0x08 | |
127 | #define PROGIF 0x09 | |
128 | #define SUBCL 0x0a | |
129 | #define BASCL 0x0b | |
130 | #define BaseA0 0x10 | |
131 | #define BaseA1 0x14 | |
132 | #define BaseA2 0x18 | |
133 | #define BaseA3 0x1c | |
134 | #define INTLINE 0x3c | |
135 | #define INPINE 0x3d | |
136 | ||
137 | #define CFR 0x50 | |
138 | #define CFR_DEVREV 0x03 | |
139 | #define CFR_IDE01INTR 0x04 | |
140 | #define CFR_DEVID 0x18 | |
141 | #define CFR_AT_VESA_078h 0x20 | |
142 | #define CFR_DSA1 0x40 | |
143 | #define CFR_DSA0 0x80 | |
144 | ||
145 | #define CNTRL 0x51 | |
146 | #define CNTRL_DIS_RA0 0x40 | |
147 | #define CNTRL_DIS_RA1 0x80 | |
148 | #define CNTRL_ENA_2ND 0x08 | |
149 | ||
150 | #define CMDTIM 0x52 | |
151 | #define ARTTIM0 0x53 | |
152 | #define DRWTIM0 0x54 | |
153 | #define ARTTIM1 0x55 | |
154 | #define DRWTIM1 0x56 | |
155 | #define ARTTIM23 0x57 | |
156 | #define ARTTIM23_DIS_RA2 0x04 | |
157 | #define ARTTIM23_DIS_RA3 0x08 | |
158 | #define DRWTIM23 0x58 | |
159 | #define BRST 0x59 | |
160 | ||
161 | /* | |
162 | * Registers and masks for easy access by drive index: | |
163 | */ | |
164 | static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; | |
165 | static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; | |
166 | ||
167 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
168 | ||
169 | static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; | |
170 | static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23}; | |
171 | ||
172 | /* | |
173 | * Current cmd640 timing values for each drive. | |
174 | * The defaults for each are the slowest possible timings. | |
175 | */ | |
176 | static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */ | |
177 | static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */ | |
178 | static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */ | |
179 | ||
180 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | |
181 | ||
5bbcf924 BZ |
182 | static DEFINE_SPINLOCK(cmd640_lock); |
183 | ||
1da177e4 LT |
184 | /* |
185 | * These are initialized to point at the devices we control | |
186 | */ | |
187 | static ide_hwif_t *cmd_hwif0, *cmd_hwif1; | |
188 | static ide_drive_t *cmd_drives[4]; | |
189 | ||
190 | /* | |
191 | * Interface to access cmd640x registers | |
192 | */ | |
193 | static unsigned int cmd640_key; | |
194 | static void (*__put_cmd640_reg)(u16 reg, u8 val); | |
195 | static u8 (*__get_cmd640_reg)(u16 reg); | |
196 | ||
197 | /* | |
198 | * This is read from the CFR reg, and is used in several places. | |
199 | */ | |
200 | static unsigned int cmd640_chip_version; | |
201 | ||
202 | /* | |
203 | * The CMD640x chip does not support DWORD config write cycles, but some | |
204 | * of the BIOSes use them to implement the config services. | |
205 | * Therefore, we must use direct IO instead. | |
206 | */ | |
207 | ||
208 | /* PCI method 1 access */ | |
209 | ||
210 | static void put_cmd640_reg_pci1 (u16 reg, u8 val) | |
211 | { | |
212 | outl_p((reg & 0xfc) | cmd640_key, 0xcf8); | |
213 | outb_p(val, (reg & 3) | 0xcfc); | |
214 | } | |
215 | ||
216 | static u8 get_cmd640_reg_pci1 (u16 reg) | |
217 | { | |
218 | outl_p((reg & 0xfc) | cmd640_key, 0xcf8); | |
219 | return inb_p((reg & 3) | 0xcfc); | |
220 | } | |
221 | ||
222 | /* PCI method 2 access (from CMD datasheet) */ | |
223 | ||
224 | static void put_cmd640_reg_pci2 (u16 reg, u8 val) | |
225 | { | |
226 | outb_p(0x10, 0xcf8); | |
227 | outb_p(val, cmd640_key + reg); | |
228 | outb_p(0, 0xcf8); | |
229 | } | |
230 | ||
231 | static u8 get_cmd640_reg_pci2 (u16 reg) | |
232 | { | |
233 | u8 b; | |
234 | ||
235 | outb_p(0x10, 0xcf8); | |
236 | b = inb_p(cmd640_key + reg); | |
237 | outb_p(0, 0xcf8); | |
238 | return b; | |
239 | } | |
240 | ||
241 | /* VLB access */ | |
242 | ||
243 | static void put_cmd640_reg_vlb (u16 reg, u8 val) | |
244 | { | |
245 | outb_p(reg, cmd640_key); | |
246 | outb_p(val, cmd640_key + 4); | |
247 | } | |
248 | ||
249 | static u8 get_cmd640_reg_vlb (u16 reg) | |
250 | { | |
251 | outb_p(reg, cmd640_key); | |
252 | return inb_p(cmd640_key + 4); | |
253 | } | |
254 | ||
255 | static u8 get_cmd640_reg(u16 reg) | |
256 | { | |
1da177e4 | 257 | unsigned long flags; |
5bbcf924 | 258 | u8 b; |
1da177e4 | 259 | |
5bbcf924 | 260 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 | 261 | b = __get_cmd640_reg(reg); |
5bbcf924 | 262 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
263 | return b; |
264 | } | |
265 | ||
266 | static void put_cmd640_reg(u16 reg, u8 val) | |
267 | { | |
268 | unsigned long flags; | |
269 | ||
5bbcf924 | 270 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 | 271 | __put_cmd640_reg(reg,val); |
5bbcf924 | 272 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
273 | } |
274 | ||
275 | static int __init match_pci_cmd640_device (void) | |
276 | { | |
277 | const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; | |
278 | unsigned int i; | |
279 | for (i = 0; i < 4; i++) { | |
280 | if (get_cmd640_reg(i) != ven_dev[i]) | |
281 | return 0; | |
282 | } | |
283 | #ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT | |
284 | if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) { | |
285 | printk("ide: cmd640 on PCI disabled by BIOS\n"); | |
286 | return 0; | |
287 | } | |
288 | #endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */ | |
289 | return 1; /* success */ | |
290 | } | |
291 | ||
292 | /* | |
293 | * Probe for CMD640x -- pci method 1 | |
294 | */ | |
295 | static int __init probe_for_cmd640_pci1 (void) | |
296 | { | |
297 | __get_cmd640_reg = get_cmd640_reg_pci1; | |
298 | __put_cmd640_reg = put_cmd640_reg_pci1; | |
299 | for (cmd640_key = 0x80000000; | |
300 | cmd640_key <= 0x8000f800; | |
301 | cmd640_key += 0x800) { | |
302 | if (match_pci_cmd640_device()) | |
303 | return 1; /* success */ | |
304 | } | |
305 | return 0; | |
306 | } | |
307 | ||
308 | /* | |
309 | * Probe for CMD640x -- pci method 2 | |
310 | */ | |
311 | static int __init probe_for_cmd640_pci2 (void) | |
312 | { | |
313 | __get_cmd640_reg = get_cmd640_reg_pci2; | |
314 | __put_cmd640_reg = put_cmd640_reg_pci2; | |
315 | for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) { | |
316 | if (match_pci_cmd640_device()) | |
317 | return 1; /* success */ | |
318 | } | |
319 | return 0; | |
320 | } | |
321 | ||
322 | /* | |
323 | * Probe for CMD640x -- vlb | |
324 | */ | |
325 | static int __init probe_for_cmd640_vlb (void) | |
326 | { | |
327 | u8 b; | |
328 | ||
329 | __get_cmd640_reg = get_cmd640_reg_vlb; | |
330 | __put_cmd640_reg = put_cmd640_reg_vlb; | |
331 | cmd640_key = 0x178; | |
332 | b = get_cmd640_reg(CFR); | |
333 | if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) { | |
334 | cmd640_key = 0x78; | |
335 | b = get_cmd640_reg(CFR); | |
336 | if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h)) | |
337 | return 0; | |
338 | } | |
339 | return 1; /* success */ | |
340 | } | |
341 | ||
342 | /* | |
343 | * Returns 1 if an IDE interface/drive exists at 0x170, | |
344 | * Returns 0 otherwise. | |
345 | */ | |
346 | static int __init secondary_port_responding (void) | |
347 | { | |
348 | unsigned long flags; | |
349 | ||
5bbcf924 | 350 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 LT |
351 | |
352 | outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */ | |
353 | udelay(100); | |
354 | if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) { | |
355 | outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */ | |
356 | udelay(100); | |
357 | if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) { | |
5bbcf924 | 358 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
359 | return 0; /* nothing responded */ |
360 | } | |
361 | } | |
5bbcf924 | 362 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
363 | return 1; /* success */ |
364 | } | |
365 | ||
366 | #ifdef CMD640_DUMP_REGS | |
367 | /* | |
368 | * Dump out all cmd640 registers. May be called from ide.c | |
369 | */ | |
370 | static void cmd640_dump_regs (void) | |
371 | { | |
372 | unsigned int reg = cmd640_vlb ? 0x50 : 0x00; | |
373 | ||
374 | /* Dump current state of chip registers */ | |
375 | printk("ide: cmd640 internal register dump:"); | |
376 | for (; reg <= 0x59; reg++) { | |
377 | if (!(reg & 0x0f)) | |
378 | printk("\n%04x:", reg); | |
379 | printk(" %02x", get_cmd640_reg(reg)); | |
380 | } | |
381 | printk("\n"); | |
382 | } | |
383 | #endif | |
384 | ||
385 | /* | |
386 | * Check whether prefetch is on for a drive, | |
387 | * and initialize the unmask flags for safe operation. | |
388 | */ | |
389 | static void __init check_prefetch (unsigned int index) | |
390 | { | |
391 | ide_drive_t *drive = cmd_drives[index]; | |
392 | u8 b = get_cmd640_reg(prefetch_regs[index]); | |
393 | ||
394 | if (b & prefetch_masks[index]) { /* is prefetch off? */ | |
395 | drive->no_unmask = 0; | |
396 | drive->no_io_32bit = 1; | |
397 | drive->io_32bit = 0; | |
398 | } else { | |
399 | #if CMD640_PREFETCH_MASKS | |
400 | drive->no_unmask = 1; | |
401 | drive->unmask = 0; | |
402 | #endif | |
403 | drive->no_io_32bit = 0; | |
404 | } | |
405 | } | |
406 | ||
407 | /* | |
408 | * Figure out which devices we control | |
409 | */ | |
410 | static void __init setup_device_ptrs (void) | |
411 | { | |
daaad24f BZ |
412 | cmd_hwif0 = &ide_hwifs[0]; |
413 | cmd_hwif1 = &ide_hwifs[1]; | |
1da177e4 | 414 | |
1da177e4 LT |
415 | cmd_drives[0] = &cmd_hwif0->drives[0]; |
416 | cmd_drives[1] = &cmd_hwif0->drives[1]; | |
417 | cmd_drives[2] = &cmd_hwif1->drives[0]; | |
418 | cmd_drives[3] = &cmd_hwif1->drives[1]; | |
419 | } | |
420 | ||
421 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
422 | ||
423 | /* | |
424 | * Sets prefetch mode for a drive. | |
425 | */ | |
426 | static void set_prefetch_mode (unsigned int index, int mode) | |
427 | { | |
428 | ide_drive_t *drive = cmd_drives[index]; | |
5bbcf924 | 429 | unsigned long flags; |
1da177e4 LT |
430 | int reg = prefetch_regs[index]; |
431 | u8 b; | |
1da177e4 | 432 | |
5bbcf924 | 433 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 LT |
434 | b = __get_cmd640_reg(reg); |
435 | if (mode) { /* want prefetch on? */ | |
436 | #if CMD640_PREFETCH_MASKS | |
437 | drive->no_unmask = 1; | |
438 | drive->unmask = 0; | |
439 | #endif | |
440 | drive->no_io_32bit = 0; | |
441 | b &= ~prefetch_masks[index]; /* enable prefetch */ | |
442 | } else { | |
443 | drive->no_unmask = 0; | |
444 | drive->no_io_32bit = 1; | |
445 | drive->io_32bit = 0; | |
446 | b |= prefetch_masks[index]; /* disable prefetch */ | |
447 | } | |
448 | __put_cmd640_reg(reg, b); | |
5bbcf924 | 449 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
450 | } |
451 | ||
452 | /* | |
453 | * Dump out current drive clocks settings | |
454 | */ | |
455 | static void display_clocks (unsigned int index) | |
456 | { | |
457 | u8 active_count, recovery_count; | |
458 | ||
459 | active_count = active_counts[index]; | |
460 | if (active_count == 1) | |
461 | ++active_count; | |
462 | recovery_count = recovery_counts[index]; | |
463 | if (active_count > 3 && recovery_count == 1) | |
464 | ++recovery_count; | |
465 | if (cmd640_chip_version > 1) | |
466 | recovery_count += 1; /* cmd640b uses (count + 1)*/ | |
467 | printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count); | |
468 | } | |
469 | ||
470 | /* | |
471 | * Pack active and recovery counts into single byte representation | |
472 | * used by controller | |
473 | */ | |
77933d72 | 474 | static inline u8 pack_nibbles (u8 upper, u8 lower) |
1da177e4 LT |
475 | { |
476 | return ((upper & 0x0f) << 4) | (lower & 0x0f); | |
477 | } | |
478 | ||
479 | /* | |
480 | * This routine retrieves the initial drive timings from the chipset. | |
481 | */ | |
482 | static void __init retrieve_drive_counts (unsigned int index) | |
483 | { | |
484 | u8 b; | |
485 | ||
486 | /* | |
487 | * Get the internal setup timing, and convert to clock count | |
488 | */ | |
489 | b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; | |
490 | switch (b) { | |
491 | case 0x00: b = 4; break; | |
492 | case 0x80: b = 3; break; | |
493 | case 0x40: b = 2; break; | |
494 | default: b = 5; break; | |
495 | } | |
496 | setup_counts[index] = b; | |
497 | ||
498 | /* | |
499 | * Get the active/recovery counts | |
500 | */ | |
501 | b = get_cmd640_reg(drwtim_regs[index]); | |
502 | active_counts[index] = (b >> 4) ? (b >> 4) : 0x10; | |
503 | recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10; | |
504 | } | |
505 | ||
506 | ||
507 | /* | |
508 | * This routine writes the prepared setup/active/recovery counts | |
509 | * for a drive into the cmd640 chipset registers to active them. | |
510 | */ | |
511 | static void program_drive_counts (unsigned int index) | |
512 | { | |
513 | unsigned long flags; | |
514 | u8 setup_count = setup_counts[index]; | |
515 | u8 active_count = active_counts[index]; | |
516 | u8 recovery_count = recovery_counts[index]; | |
517 | ||
518 | /* | |
519 | * Set up address setup count and drive read/write timing registers. | |
520 | * Primary interface has individual count/timing registers for | |
521 | * each drive. Secondary interface has one common set of registers, | |
522 | * so we merge the timings, using the slowest value for each timing. | |
523 | */ | |
524 | if (index > 1) { | |
525 | unsigned int mate; | |
526 | if (cmd_drives[mate = index ^ 1]->present) { | |
527 | if (setup_count < setup_counts[mate]) | |
528 | setup_count = setup_counts[mate]; | |
529 | if (active_count < active_counts[mate]) | |
530 | active_count = active_counts[mate]; | |
531 | if (recovery_count < recovery_counts[mate]) | |
532 | recovery_count = recovery_counts[mate]; | |
533 | } | |
534 | } | |
535 | ||
536 | /* | |
537 | * Convert setup_count to internal chipset representation | |
538 | */ | |
539 | switch (setup_count) { | |
540 | case 4: setup_count = 0x00; break; | |
541 | case 3: setup_count = 0x80; break; | |
542 | case 1: | |
543 | case 2: setup_count = 0x40; break; | |
544 | default: setup_count = 0xc0; /* case 5 */ | |
545 | } | |
546 | ||
547 | /* | |
548 | * Now that everything is ready, program the new timings | |
549 | */ | |
5bbcf924 | 550 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 LT |
551 | /* |
552 | * Program the address_setup clocks into ARTTIM reg, | |
553 | * and then the active/recovery counts into the DRWTIM reg | |
554 | * (this converts counts of 16 into counts of zero -- okay). | |
555 | */ | |
556 | setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f; | |
557 | __put_cmd640_reg(arttim_regs[index], setup_count); | |
558 | __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count)); | |
5bbcf924 | 559 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
560 | } |
561 | ||
562 | /* | |
563 | * Set a specific pio_mode for a drive | |
564 | */ | |
565 | static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time) | |
566 | { | |
567 | int setup_time, active_time, recovery_time, clock_time; | |
568 | u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; | |
569 | int bus_speed = system_bus_clock(); | |
570 | ||
571 | if (pio_mode > 5) | |
572 | pio_mode = 5; | |
573 | setup_time = ide_pio_timings[pio_mode].setup_time; | |
574 | active_time = ide_pio_timings[pio_mode].active_time; | |
575 | recovery_time = cycle_time - (setup_time + active_time); | |
576 | clock_time = 1000 / bus_speed; | |
577 | cycle_count = (cycle_time + clock_time - 1) / clock_time; | |
578 | ||
579 | setup_count = (setup_time + clock_time - 1) / clock_time; | |
580 | ||
581 | active_count = (active_time + clock_time - 1) / clock_time; | |
582 | if (active_count < 2) | |
583 | active_count = 2; /* minimum allowed by cmd640 */ | |
584 | ||
585 | recovery_count = (recovery_time + clock_time - 1) / clock_time; | |
586 | recovery_count2 = cycle_count - (setup_count + active_count); | |
587 | if (recovery_count2 > recovery_count) | |
588 | recovery_count = recovery_count2; | |
589 | if (recovery_count < 2) | |
590 | recovery_count = 2; /* minimum allowed by cmd640 */ | |
591 | if (recovery_count > 17) { | |
592 | active_count += recovery_count - 17; | |
593 | recovery_count = 17; | |
594 | } | |
595 | if (active_count > 16) | |
596 | active_count = 16; /* maximum allowed by cmd640 */ | |
597 | if (cmd640_chip_version > 1) | |
598 | recovery_count -= 1; /* cmd640b uses (count + 1)*/ | |
599 | if (recovery_count > 16) | |
600 | recovery_count = 16; /* maximum allowed by cmd640 */ | |
601 | ||
602 | setup_counts[index] = setup_count; | |
603 | active_counts[index] = active_count; | |
604 | recovery_counts[index] = recovery_count; | |
605 | ||
606 | /* | |
607 | * In a perfect world, we might set the drive pio mode here | |
608 | * (using WIN_SETFEATURE) before continuing. | |
609 | * | |
610 | * But we do not, because: | |
611 | * 1) this is the wrong place to do it (proper is do_special() in ide.c) | |
612 | * 2) in practice this is rarely, if ever, necessary | |
613 | */ | |
614 | program_drive_counts (index); | |
615 | } | |
616 | ||
26bcb879 | 617 | static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 | 618 | { |
7dd00083 | 619 | unsigned int index = 0, cycle_time; |
1da177e4 | 620 | u8 b; |
1da177e4 LT |
621 | |
622 | while (drive != cmd_drives[index]) { | |
623 | if (++index > 3) { | |
26bcb879 BZ |
624 | printk(KERN_ERR "%s: bad news in %s\n", |
625 | drive->name, __FUNCTION__); | |
1da177e4 LT |
626 | return; |
627 | } | |
628 | } | |
26bcb879 | 629 | switch (pio) { |
1da177e4 LT |
630 | case 6: /* set fast-devsel off */ |
631 | case 7: /* set fast-devsel on */ | |
1da177e4 | 632 | b = get_cmd640_reg(CNTRL) & ~0x27; |
26bcb879 | 633 | if (pio & 1) |
1da177e4 LT |
634 | b |= 0x27; |
635 | put_cmd640_reg(CNTRL, b); | |
26bcb879 | 636 | printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis"); |
1da177e4 LT |
637 | return; |
638 | ||
639 | case 8: /* set prefetch off */ | |
640 | case 9: /* set prefetch on */ | |
26bcb879 BZ |
641 | set_prefetch_mode(index, pio & 1); |
642 | printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis"); | |
1da177e4 LT |
643 | return; |
644 | } | |
645 | ||
26bcb879 BZ |
646 | cycle_time = ide_pio_cycle_time(drive, pio); |
647 | cmd640_set_mode(index, pio, cycle_time); | |
1da177e4 | 648 | |
342cdb6d | 649 | printk("%s: selected cmd640 PIO mode%d (%dns)", |
26bcb879 | 650 | drive->name, pio, cycle_time); |
342cdb6d | 651 | |
1da177e4 | 652 | display_clocks(index); |
1da177e4 LT |
653 | } |
654 | ||
655 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | |
656 | ||
657 | static int pci_conf1(void) | |
658 | { | |
1da177e4 | 659 | unsigned long flags; |
5bbcf924 | 660 | u32 tmp; |
1da177e4 | 661 | |
5bbcf924 | 662 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 LT |
663 | outb(0x01, 0xCFB); |
664 | tmp = inl(0xCF8); | |
665 | outl(0x80000000, 0xCF8); | |
666 | if (inl(0xCF8) == 0x80000000) { | |
667 | outl(tmp, 0xCF8); | |
5bbcf924 | 668 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
669 | return 1; |
670 | } | |
671 | outl(tmp, 0xCF8); | |
5bbcf924 | 672 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
673 | return 0; |
674 | } | |
675 | ||
676 | static int pci_conf2(void) | |
677 | { | |
678 | unsigned long flags; | |
679 | ||
5bbcf924 | 680 | spin_lock_irqsave(&cmd640_lock, flags); |
1da177e4 LT |
681 | outb(0x00, 0xCFB); |
682 | outb(0x00, 0xCF8); | |
683 | outb(0x00, 0xCFA); | |
684 | if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) { | |
5bbcf924 | 685 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
686 | return 1; |
687 | } | |
5bbcf924 | 688 | spin_unlock_irqrestore(&cmd640_lock, flags); |
1da177e4 LT |
689 | return 0; |
690 | } | |
691 | ||
c413b9b9 BZ |
692 | static const struct ide_port_info cmd640_port_info __initdata = { |
693 | .chipset = ide_cmd640, | |
694 | .host_flags = IDE_HFLAG_SERIALIZE | | |
695 | IDE_HFLAG_NO_DMA | | |
696 | IDE_HFLAG_NO_AUTOTUNE | | |
697 | IDE_HFLAG_ABUSE_PREFETCH | | |
698 | IDE_HFLAG_ABUSE_FAST_DEVSEL, | |
699 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
700 | .pio_mask = ATA_PIO5, | |
701 | #endif | |
702 | }; | |
703 | ||
1da177e4 | 704 | /* |
ade2daf9 | 705 | * Probe for a cmd640 chipset, and initialize it if found. |
1da177e4 | 706 | */ |
ade2daf9 | 707 | static int __init cmd640x_init(void) |
1da177e4 LT |
708 | { |
709 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
710 | int second_port_toggled = 0; | |
711 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | |
712 | int second_port_cmd640 = 0; | |
713 | const char *bus_type, *port2; | |
714 | unsigned int index; | |
715 | u8 b, cfr; | |
8ac4ce74 | 716 | u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; |
6d3803b6 | 717 | hw_regs_t hw[2]; |
1da177e4 LT |
718 | |
719 | if (cmd640_vlb && probe_for_cmd640_vlb()) { | |
720 | bus_type = "VLB"; | |
721 | } else { | |
722 | cmd640_vlb = 0; | |
723 | /* Find out what kind of PCI probing is supported otherwise | |
724 | Justin Gibbs will sulk.. */ | |
725 | if (pci_conf1() && probe_for_cmd640_pci1()) | |
726 | bus_type = "PCI (type1)"; | |
727 | else if (pci_conf2() && probe_for_cmd640_pci2()) | |
728 | bus_type = "PCI (type2)"; | |
729 | else | |
730 | return 0; | |
731 | } | |
732 | /* | |
733 | * Undocumented magic (there is no 0x5b reg in specs) | |
734 | */ | |
735 | put_cmd640_reg(0x5b, 0xbd); | |
736 | if (get_cmd640_reg(0x5b) != 0xbd) { | |
737 | printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n"); | |
738 | return 0; | |
739 | } | |
740 | put_cmd640_reg(0x5b, 0); | |
741 | ||
742 | #ifdef CMD640_DUMP_REGS | |
743 | cmd640_dump_regs(); | |
744 | #endif | |
745 | ||
746 | /* | |
747 | * Documented magic begins here | |
748 | */ | |
749 | cfr = get_cmd640_reg(CFR); | |
750 | cmd640_chip_version = cfr & CFR_DEVREV; | |
751 | if (cmd640_chip_version == 0) { | |
752 | printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version); | |
753 | return 0; | |
754 | } | |
755 | ||
6d3803b6 BZ |
756 | memset(&hw, 0, sizeof(hw)); |
757 | ||
758 | ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); | |
759 | hw[0].irq = 14; | |
760 | ||
761 | ide_std_init_ports(&hw[1], 0x170, 0x376); | |
762 | hw[1].irq = 15; | |
763 | ||
764 | printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" | |
765 | "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); | |
766 | ||
1da177e4 LT |
767 | /* |
768 | * Initialize data for primary port | |
769 | */ | |
770 | setup_device_ptrs (); | |
6d3803b6 BZ |
771 | |
772 | ide_init_port_hw(cmd_hwif0, &hw[0]); | |
1da177e4 | 773 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED |
26bcb879 | 774 | cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; |
1da177e4 LT |
775 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ |
776 | ||
8ac4ce74 BZ |
777 | idx[0] = cmd_hwif0->index; |
778 | ||
1da177e4 LT |
779 | /* |
780 | * Ensure compatibility by always using the slowest timings | |
781 | * for access to the drive's command register block, | |
782 | * and reset the prefetch burstsize to default (512 bytes). | |
783 | * | |
784 | * Maybe we need a way to NOT do these on *some* systems? | |
785 | */ | |
786 | put_cmd640_reg(CMDTIM, 0); | |
787 | put_cmd640_reg(BRST, 0x40); | |
788 | ||
789 | /* | |
790 | * Try to enable the secondary interface, if not already enabled | |
791 | */ | |
f01674e4 | 792 | if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { |
1da177e4 LT |
793 | port2 = "not probed"; |
794 | } else { | |
795 | b = get_cmd640_reg(CNTRL); | |
796 | if (secondary_port_responding()) { | |
797 | if ((b & CNTRL_ENA_2ND)) { | |
798 | second_port_cmd640 = 1; | |
799 | port2 = "okay"; | |
800 | } else if (cmd640_vlb) { | |
801 | second_port_cmd640 = 1; | |
802 | port2 = "alive"; | |
803 | } else | |
804 | port2 = "not cmd640"; | |
805 | } else { | |
806 | put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ | |
807 | if (secondary_port_responding()) { | |
808 | second_port_cmd640 = 1; | |
809 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
810 | second_port_toggled = 1; | |
811 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | |
812 | port2 = "enabled"; | |
813 | } else { | |
814 | put_cmd640_reg(CNTRL, b); /* restore original setting */ | |
815 | port2 = "not responding"; | |
816 | } | |
817 | } | |
818 | } | |
819 | ||
820 | /* | |
821 | * Initialize data for secondary cmd640 port, if enabled | |
822 | */ | |
823 | if (second_port_cmd640) { | |
6d3803b6 | 824 | ide_init_port_hw(cmd_hwif1, &hw[1]); |
1da177e4 | 825 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED |
26bcb879 | 826 | cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; |
1da177e4 | 827 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ |
8ac4ce74 BZ |
828 | |
829 | idx[1] = cmd_hwif1->index; | |
1da177e4 LT |
830 | } |
831 | printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, | |
c413b9b9 | 832 | second_port_cmd640 ? "" : "not ", port2); |
1da177e4 LT |
833 | |
834 | /* | |
835 | * Establish initial timings/prefetch for all drives. | |
836 | * Do not unnecessarily disturb any prior BIOS setup of these. | |
837 | */ | |
838 | for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { | |
839 | ide_drive_t *drive = cmd_drives[index]; | |
840 | #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED | |
841 | if (drive->autotune || ((index > 1) && second_port_toggled)) { | |
842 | /* | |
843 | * Reset timing to the slowest speed and turn off prefetch. | |
844 | * This way, the drive identify code has a better chance. | |
845 | */ | |
846 | setup_counts [index] = 4; /* max possible */ | |
847 | active_counts [index] = 16; /* max possible */ | |
848 | recovery_counts [index] = 16; /* max possible */ | |
849 | program_drive_counts (index); | |
850 | set_prefetch_mode (index, 0); | |
851 | printk("cmd640: drive%d timings/prefetch cleared\n", index); | |
852 | } else { | |
853 | /* | |
854 | * Record timings/prefetch without changing them. | |
855 | * This preserves any prior BIOS setup. | |
856 | */ | |
857 | retrieve_drive_counts (index); | |
858 | check_prefetch (index); | |
859 | printk("cmd640: drive%d timings/prefetch(%s) preserved", | |
860 | index, drive->no_io_32bit ? "off" : "on"); | |
861 | display_clocks(index); | |
862 | } | |
863 | #else | |
864 | /* | |
865 | * Set the drive unmask flags to match the prefetch setting | |
866 | */ | |
867 | check_prefetch (index); | |
868 | printk("cmd640: drive%d timings/prefetch(%s) preserved\n", | |
869 | index, drive->no_io_32bit ? "off" : "on"); | |
870 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | |
871 | } | |
872 | ||
873 | #ifdef CMD640_DUMP_REGS | |
874 | cmd640_dump_regs(); | |
875 | #endif | |
8ac4ce74 | 876 | |
c413b9b9 | 877 | ide_device_add(idx, &cmd640_port_info); |
8ac4ce74 | 878 | |
1da177e4 LT |
879 | return 1; |
880 | } | |
881 | ||
ade2daf9 BZ |
882 | module_param_named(probe_vlb, cmd640_vlb, bool, 0); |
883 | MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset"); | |
884 | ||
885 | module_init(cmd640x_init); | |
776c0bce AB |
886 | |
887 | MODULE_LICENSE("GPL"); |