]>
Commit | Line | Data |
---|---|---|
703da5a1 RV |
1 | /****************************************************************************** |
2 | * This software may be used and distributed according to the terms of | |
3 | * the GNU General Public License (GPL), incorporated herein by reference. | |
4 | * Drivers based on or derived from this code fall under the GPL and must | |
5 | * retain the authorship, copyright and license notice. This file is not | |
6 | * a complete program and may only be used when the entire operating | |
7 | * system is licensed under the GPL. | |
8 | * See the file COPYING in this distribution for more information. | |
9 | * | |
926bd900 | 10 | * vxge-main.c: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O |
703da5a1 | 11 | * Virtualized Server Adapter. |
926bd900 | 12 | * Copyright(c) 2002-2010 Exar Corp. |
703da5a1 RV |
13 | * |
14 | * The module loadable parameters that are supported by the driver and a brief | |
15 | * explanation of all the variables: | |
16 | * vlan_tag_strip: | |
17 | * Strip VLAN Tag enable/disable. Instructs the device to remove | |
18 | * the VLAN tag from all received tagged frames that are not | |
19 | * replicated at the internal L2 switch. | |
20 | * 0 - Do not strip the VLAN tag. | |
21 | * 1 - Strip the VLAN tag. | |
22 | * | |
23 | * addr_learn_en: | |
24 | * Enable learning the mac address of the guest OS interface in | |
25 | * a virtualization environment. | |
26 | * 0 - DISABLE | |
27 | * 1 - ENABLE | |
28 | * | |
29 | * max_config_port: | |
30 | * Maximum number of port to be supported. | |
31 | * MIN -1 and MAX - 2 | |
32 | * | |
33 | * max_config_vpath: | |
34 | * This configures the maximum no of VPATH configures for each | |
35 | * device function. | |
36 | * MIN - 1 and MAX - 17 | |
37 | * | |
38 | * max_config_dev: | |
39 | * This configures maximum no of Device function to be enabled. | |
40 | * MIN - 1 and MAX - 17 | |
41 | * | |
42 | ******************************************************************************/ | |
43 | ||
75f5e1c6 JP |
44 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
45 | ||
53515734 | 46 | #include <linux/bitops.h> |
703da5a1 | 47 | #include <linux/if_vlan.h> |
a6b7a407 | 48 | #include <linux/interrupt.h> |
703da5a1 | 49 | #include <linux/pci.h> |
5a0e3ad6 | 50 | #include <linux/slab.h> |
2b05e002 | 51 | #include <linux/tcp.h> |
703da5a1 RV |
52 | #include <net/ip.h> |
53 | #include <linux/netdevice.h> | |
54 | #include <linux/etherdevice.h> | |
e8ac1756 | 55 | #include <linux/firmware.h> |
b81b3733 | 56 | #include <linux/net_tstamp.h> |
70c71606 | 57 | #include <linux/prefetch.h> |
9d9779e7 | 58 | #include <linux/module.h> |
703da5a1 RV |
59 | #include "vxge-main.h" |
60 | #include "vxge-reg.h" | |
61 | ||
62 | MODULE_LICENSE("Dual BSD/GPL"); | |
63 | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | |
64 | "Virtualized Server Adapter"); | |
65 | ||
9baa3c34 | 66 | static const struct pci_device_id vxge_id_table[] = { |
703da5a1 RV |
67 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, |
68 | PCI_ANY_ID}, | |
69 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | |
70 | PCI_ANY_ID}, | |
71 | {0} | |
72 | }; | |
73 | ||
74 | MODULE_DEVICE_TABLE(pci, vxge_id_table); | |
75 | ||
76 | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | |
77 | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | |
78 | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | |
79 | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | |
80 | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | |
81 | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | |
82 | ||
83 | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | |
84 | {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | |
85 | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | |
86 | {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | |
87 | module_param_array(bw_percentage, uint, NULL, 0); | |
88 | ||
89 | static struct vxge_drv_config *driver_config; | |
e40c10fc | 90 | static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev); |
703da5a1 RV |
91 | |
92 | static inline int is_vxge_card_up(struct vxgedev *vdev) | |
93 | { | |
94 | return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
95 | } | |
96 | ||
97 | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | |
98 | { | |
ff67df55 BL |
99 | struct sk_buff **skb_ptr = NULL; |
100 | struct sk_buff **temp; | |
101 | #define NR_SKB_COMPLETED 128 | |
102 | struct sk_buff *completed[NR_SKB_COMPLETED]; | |
103 | int more; | |
703da5a1 | 104 | |
ff67df55 BL |
105 | do { |
106 | more = 0; | |
107 | skb_ptr = completed; | |
108 | ||
98f45da2 | 109 | if (__netif_tx_trylock(fifo->txq)) { |
ff67df55 BL |
110 | vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr, |
111 | NR_SKB_COMPLETED, &more); | |
98f45da2 | 112 | __netif_tx_unlock(fifo->txq); |
ff67df55 | 113 | } |
98f45da2 | 114 | |
ff67df55 BL |
115 | /* free SKBs */ |
116 | for (temp = completed; temp != skb_ptr; temp++) | |
117 | dev_kfree_skb_irq(*temp); | |
98f45da2 | 118 | } while (more); |
703da5a1 RV |
119 | } |
120 | ||
121 | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | |
122 | { | |
123 | int i; | |
124 | ||
125 | /* Complete all transmits */ | |
126 | for (i = 0; i < vdev->no_of_vpath; i++) | |
127 | VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | |
128 | } | |
129 | ||
130 | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | |
131 | { | |
132 | int i; | |
133 | struct vxge_ring *ring; | |
134 | ||
135 | /* Complete all receives*/ | |
136 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
137 | ring = &vdev->vpaths[i].ring; | |
138 | vxge_hw_vpath_poll_rx(ring->handle); | |
139 | } | |
140 | } | |
141 | ||
703da5a1 RV |
142 | /* |
143 | * vxge_callback_link_up | |
144 | * | |
145 | * This function is called during interrupt context to notify link up state | |
146 | * change. | |
147 | */ | |
528f7272 | 148 | static void vxge_callback_link_up(struct __vxge_hw_device *hldev) |
703da5a1 RV |
149 | { |
150 | struct net_device *dev = hldev->ndev; | |
5f54cebb | 151 | struct vxgedev *vdev = netdev_priv(dev); |
703da5a1 RV |
152 | |
153 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
154 | vdev->ndev->name, __func__, __LINE__); | |
75f5e1c6 | 155 | netdev_notice(vdev->ndev, "Link Up\n"); |
703da5a1 RV |
156 | vdev->stats.link_up++; |
157 | ||
158 | netif_carrier_on(vdev->ndev); | |
d03848e0 | 159 | netif_tx_wake_all_queues(vdev->ndev); |
703da5a1 RV |
160 | |
161 | vxge_debug_entryexit(VXGE_TRACE, | |
162 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | |
163 | } | |
164 | ||
165 | /* | |
166 | * vxge_callback_link_down | |
167 | * | |
168 | * This function is called during interrupt context to notify link down state | |
169 | * change. | |
170 | */ | |
528f7272 | 171 | static void vxge_callback_link_down(struct __vxge_hw_device *hldev) |
703da5a1 RV |
172 | { |
173 | struct net_device *dev = hldev->ndev; | |
5f54cebb | 174 | struct vxgedev *vdev = netdev_priv(dev); |
703da5a1 RV |
175 | |
176 | vxge_debug_entryexit(VXGE_TRACE, | |
177 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | |
75f5e1c6 | 178 | netdev_notice(vdev->ndev, "Link Down\n"); |
703da5a1 RV |
179 | |
180 | vdev->stats.link_down++; | |
181 | netif_carrier_off(vdev->ndev); | |
d03848e0 | 182 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
183 | |
184 | vxge_debug_entryexit(VXGE_TRACE, | |
185 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | |
186 | } | |
187 | ||
188 | /* | |
189 | * vxge_rx_alloc | |
190 | * | |
191 | * Allocate SKB. | |
192 | */ | |
528f7272 | 193 | static struct sk_buff * |
703da5a1 RV |
194 | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) |
195 | { | |
196 | struct net_device *dev; | |
197 | struct sk_buff *skb; | |
198 | struct vxge_rx_priv *rx_priv; | |
199 | ||
200 | dev = ring->ndev; | |
201 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
202 | ring->ndev->name, __func__, __LINE__); | |
203 | ||
204 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
205 | ||
206 | /* try to allocate skb first. this one may fail */ | |
207 | skb = netdev_alloc_skb(dev, skb_size + | |
208 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
209 | if (skb == NULL) { | |
210 | vxge_debug_mem(VXGE_ERR, | |
211 | "%s: out of memory to allocate SKB", dev->name); | |
212 | ring->stats.skb_alloc_fail++; | |
213 | return NULL; | |
214 | } | |
215 | ||
216 | vxge_debug_mem(VXGE_TRACE, | |
217 | "%s: %s:%d Skb : 0x%p", ring->ndev->name, | |
218 | __func__, __LINE__, skb); | |
219 | ||
220 | skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
221 | ||
222 | rx_priv->skb = skb; | |
ea11bbe0 | 223 | rx_priv->skb_data = NULL; |
703da5a1 RV |
224 | rx_priv->data_size = skb_size; |
225 | vxge_debug_entryexit(VXGE_TRACE, | |
226 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
227 | ||
228 | return skb; | |
229 | } | |
230 | ||
231 | /* | |
232 | * vxge_rx_map | |
233 | */ | |
234 | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | |
235 | { | |
236 | struct vxge_rx_priv *rx_priv; | |
237 | dma_addr_t dma_addr; | |
238 | ||
239 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
240 | ring->ndev->name, __func__, __LINE__); | |
241 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
242 | ||
ea11bbe0 BL |
243 | rx_priv->skb_data = rx_priv->skb->data; |
244 | dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, | |
703da5a1 RV |
245 | rx_priv->data_size, PCI_DMA_FROMDEVICE); |
246 | ||
fa15e99b | 247 | if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) { |
703da5a1 RV |
248 | ring->stats.pci_map_fail++; |
249 | return -EIO; | |
250 | } | |
251 | vxge_debug_mem(VXGE_TRACE, | |
252 | "%s: %s:%d 1 buffer mode dma_addr = 0x%llx", | |
253 | ring->ndev->name, __func__, __LINE__, | |
254 | (unsigned long long)dma_addr); | |
255 | vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | |
256 | ||
257 | rx_priv->data_dma = dma_addr; | |
258 | vxge_debug_entryexit(VXGE_TRACE, | |
259 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
260 | ||
261 | return 0; | |
262 | } | |
263 | ||
264 | /* | |
265 | * vxge_rx_initial_replenish | |
266 | * Allocation of RxD as an initial replenish procedure. | |
267 | */ | |
268 | static enum vxge_hw_status | |
269 | vxge_rx_initial_replenish(void *dtrh, void *userdata) | |
270 | { | |
271 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
272 | struct vxge_rx_priv *rx_priv; | |
273 | ||
274 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
275 | ring->ndev->name, __func__, __LINE__); | |
276 | if (vxge_rx_alloc(dtrh, ring, | |
277 | VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | |
278 | return VXGE_HW_FAIL; | |
279 | ||
280 | if (vxge_rx_map(dtrh, ring)) { | |
281 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
282 | dev_kfree_skb(rx_priv->skb); | |
283 | ||
284 | return VXGE_HW_FAIL; | |
285 | } | |
286 | vxge_debug_entryexit(VXGE_TRACE, | |
287 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
288 | ||
289 | return VXGE_HW_OK; | |
290 | } | |
291 | ||
292 | static inline void | |
293 | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | |
294 | int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | |
295 | { | |
296 | ||
297 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
298 | ring->ndev->name, __func__, __LINE__); | |
299 | skb_record_rx_queue(skb, ring->driver_id); | |
300 | skb->protocol = eth_type_trans(skb, ring->ndev); | |
301 | ||
62ea0557 | 302 | u64_stats_update_begin(&ring->stats.syncp); |
703da5a1 RV |
303 | ring->stats.rx_frms++; |
304 | ring->stats.rx_bytes += pkt_length; | |
305 | ||
306 | if (skb->pkt_type == PACKET_MULTICAST) | |
307 | ring->stats.rx_mcast++; | |
62ea0557 | 308 | u64_stats_update_end(&ring->stats.syncp); |
703da5a1 RV |
309 | |
310 | vxge_debug_rx(VXGE_TRACE, | |
311 | "%s: %s:%d skb protocol = %d", | |
312 | ring->ndev->name, __func__, __LINE__, skb->protocol); | |
313 | ||
53515734 JP |
314 | if (ext_info->vlan && |
315 | ring->vlan_tag_strip == VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE) | |
86a9bad3 | 316 | __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ext_info->vlan); |
53515734 | 317 | napi_gro_receive(ring->napi_p, skb); |
feb990d4 | 318 | |
703da5a1 RV |
319 | vxge_debug_entryexit(VXGE_TRACE, |
320 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
321 | } | |
322 | ||
323 | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | |
324 | struct vxge_rx_priv *rx_priv) | |
325 | { | |
326 | pci_dma_sync_single_for_device(ring->pdev, | |
327 | rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | |
328 | ||
329 | vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | |
330 | vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | |
331 | } | |
332 | ||
333 | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | |
334 | void *post_dtr, struct __vxge_hw_ring *ringh) | |
335 | { | |
336 | int dtr_count = *dtr_cnt; | |
337 | if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | |
338 | if (*first_dtr) | |
339 | vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | |
340 | *first_dtr = post_dtr; | |
341 | } else | |
342 | vxge_hw_ring_rxd_post_post(ringh, post_dtr); | |
343 | dtr_count++; | |
344 | *dtr_cnt = dtr_count; | |
345 | } | |
346 | ||
347 | /* | |
348 | * vxge_rx_1b_compl | |
349 | * | |
350 | * If the interrupt is because of a received frame or if the receive ring | |
351 | * contains fresh as yet un-processed frames, this function is called. | |
352 | */ | |
42821a5b | 353 | static enum vxge_hw_status |
703da5a1 RV |
354 | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, |
355 | u8 t_code, void *userdata) | |
356 | { | |
357 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
b81b3733 | 358 | struct net_device *dev = ring->ndev; |
703da5a1 RV |
359 | unsigned int dma_sizes; |
360 | void *first_dtr = NULL; | |
361 | int dtr_cnt = 0; | |
362 | int data_size; | |
363 | dma_addr_t data_dma; | |
364 | int pkt_length; | |
365 | struct sk_buff *skb; | |
366 | struct vxge_rx_priv *rx_priv; | |
367 | struct vxge_hw_ring_rxd_info ext_info; | |
368 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
369 | ring->ndev->name, __func__, __LINE__); | |
703da5a1 | 370 | |
c7b82cc8 EB |
371 | if (ring->budget <= 0) |
372 | goto out; | |
373 | ||
703da5a1 | 374 | do { |
3f23e436 | 375 | prefetch((char *)dtr + L1_CACHE_BYTES); |
703da5a1 RV |
376 | rx_priv = vxge_hw_ring_rxd_private_get(dtr); |
377 | skb = rx_priv->skb; | |
378 | data_size = rx_priv->data_size; | |
379 | data_dma = rx_priv->data_dma; | |
ea11bbe0 | 380 | prefetch(rx_priv->skb_data); |
703da5a1 RV |
381 | |
382 | vxge_debug_rx(VXGE_TRACE, | |
383 | "%s: %s:%d skb = 0x%p", | |
384 | ring->ndev->name, __func__, __LINE__, skb); | |
385 | ||
386 | vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | |
387 | pkt_length = dma_sizes; | |
388 | ||
22fa125e SH |
389 | pkt_length -= ETH_FCS_LEN; |
390 | ||
703da5a1 RV |
391 | vxge_debug_rx(VXGE_TRACE, |
392 | "%s: %s:%d Packet Length = %d", | |
393 | ring->ndev->name, __func__, __LINE__, pkt_length); | |
394 | ||
395 | vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | |
396 | ||
397 | /* check skb validity */ | |
398 | vxge_assert(skb); | |
399 | ||
400 | prefetch((char *)skb + L1_CACHE_BYTES); | |
401 | if (unlikely(t_code)) { | |
703da5a1 RV |
402 | if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != |
403 | VXGE_HW_OK) { | |
404 | ||
405 | ring->stats.rx_errors++; | |
406 | vxge_debug_rx(VXGE_TRACE, | |
407 | "%s: %s :%d Rx T_code is %d", | |
408 | ring->ndev->name, __func__, | |
409 | __LINE__, t_code); | |
410 | ||
411 | /* If the t_code is not supported and if the | |
412 | * t_code is other than 0x5 (unparseable packet | |
413 | * such as unknown UPV6 header), Drop it !!! | |
414 | */ | |
415 | vxge_re_pre_post(dtr, ring, rx_priv); | |
416 | ||
417 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
418 | ring->stats.rx_dropped++; | |
419 | continue; | |
420 | } | |
421 | } | |
422 | ||
423 | if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | |
703da5a1 | 424 | if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { |
703da5a1 RV |
425 | if (!vxge_rx_map(dtr, ring)) { |
426 | skb_put(skb, pkt_length); | |
427 | ||
428 | pci_unmap_single(ring->pdev, data_dma, | |
429 | data_size, PCI_DMA_FROMDEVICE); | |
430 | ||
431 | vxge_hw_ring_rxd_pre_post(ringh, dtr); | |
432 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
433 | ringh); | |
434 | } else { | |
435 | dev_kfree_skb(rx_priv->skb); | |
436 | rx_priv->skb = skb; | |
437 | rx_priv->data_size = data_size; | |
438 | vxge_re_pre_post(dtr, ring, rx_priv); | |
439 | ||
440 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
441 | ringh); | |
442 | ring->stats.rx_dropped++; | |
443 | break; | |
444 | } | |
445 | } else { | |
446 | vxge_re_pre_post(dtr, ring, rx_priv); | |
447 | ||
448 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
449 | ring->stats.rx_dropped++; | |
450 | break; | |
451 | } | |
452 | } else { | |
453 | struct sk_buff *skb_up; | |
454 | ||
455 | skb_up = netdev_alloc_skb(dev, pkt_length + | |
456 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
457 | if (skb_up != NULL) { | |
458 | skb_reserve(skb_up, | |
459 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
460 | ||
461 | pci_dma_sync_single_for_cpu(ring->pdev, | |
462 | data_dma, data_size, | |
463 | PCI_DMA_FROMDEVICE); | |
464 | ||
465 | vxge_debug_mem(VXGE_TRACE, | |
466 | "%s: %s:%d skb_up = %p", | |
467 | ring->ndev->name, __func__, | |
468 | __LINE__, skb); | |
469 | memcpy(skb_up->data, skb->data, pkt_length); | |
470 | ||
471 | vxge_re_pre_post(dtr, ring, rx_priv); | |
472 | ||
473 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
474 | ringh); | |
475 | /* will netif_rx small SKB instead */ | |
476 | skb = skb_up; | |
477 | skb_put(skb, pkt_length); | |
478 | } else { | |
479 | vxge_re_pre_post(dtr, ring, rx_priv); | |
480 | ||
481 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
482 | vxge_debug_rx(VXGE_ERR, | |
483 | "%s: vxge_rx_1b_compl: out of " | |
484 | "memory", dev->name); | |
485 | ring->stats.skb_alloc_fail++; | |
486 | break; | |
487 | } | |
488 | } | |
489 | ||
490 | if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | |
491 | !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | |
feb990d4 | 492 | (dev->features & NETIF_F_RXCSUM) && /* Offload Rx side CSUM */ |
703da5a1 RV |
493 | ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && |
494 | ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | |
495 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
496 | else | |
bc8acf2c | 497 | skb_checksum_none_assert(skb); |
703da5a1 | 498 | |
b81b3733 JM |
499 | |
500 | if (ring->rx_hwts) { | |
501 | struct skb_shared_hwtstamps *skb_hwts; | |
502 | u32 ns = *(u32 *)(skb->head + pkt_length); | |
503 | ||
504 | skb_hwts = skb_hwtstamps(skb); | |
505 | skb_hwts->hwtstamp = ns_to_ktime(ns); | |
b81b3733 JM |
506 | } |
507 | ||
47f01db4 JM |
508 | /* rth_hash_type and rth_it_hit are non-zero regardless of |
509 | * whether rss is enabled. Only the rth_value is zero/non-zero | |
510 | * if rss is disabled/enabled, so key off of that. | |
511 | */ | |
512 | if (ext_info.rth_value) | |
c4be416b TH |
513 | skb_set_hash(skb, ext_info.rth_value, |
514 | PKT_HASH_TYPE_L3); | |
47f01db4 | 515 | |
703da5a1 RV |
516 | vxge_rx_complete(ring, skb, ext_info.vlan, |
517 | pkt_length, &ext_info); | |
518 | ||
519 | ring->budget--; | |
520 | ring->pkts_processed++; | |
521 | if (!ring->budget) | |
522 | break; | |
523 | ||
524 | } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | |
525 | &t_code) == VXGE_HW_OK); | |
526 | ||
527 | if (first_dtr) | |
528 | vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | |
529 | ||
c7b82cc8 | 530 | out: |
703da5a1 RV |
531 | vxge_debug_entryexit(VXGE_TRACE, |
532 | "%s:%d Exiting...", | |
533 | __func__, __LINE__); | |
534 | return VXGE_HW_OK; | |
535 | } | |
536 | ||
537 | /* | |
538 | * vxge_xmit_compl | |
539 | * | |
540 | * If an interrupt was raised to indicate DMA complete of the Tx packet, | |
541 | * this function is called. It identifies the last TxD whose buffer was | |
542 | * freed and frees all skbs whose data have already DMA'ed into the NICs | |
543 | * internal memory. | |
544 | */ | |
42821a5b | 545 | static enum vxge_hw_status |
703da5a1 RV |
546 | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, |
547 | enum vxge_hw_fifo_tcode t_code, void *userdata, | |
ff67df55 | 548 | struct sk_buff ***skb_ptr, int nr_skb, int *more) |
703da5a1 RV |
549 | { |
550 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | |
ff67df55 | 551 | struct sk_buff *skb, **done_skb = *skb_ptr; |
703da5a1 RV |
552 | int pkt_cnt = 0; |
553 | ||
554 | vxge_debug_entryexit(VXGE_TRACE, | |
555 | "%s:%d Entered....", __func__, __LINE__); | |
556 | ||
557 | do { | |
558 | int frg_cnt; | |
559 | skb_frag_t *frag; | |
560 | int i = 0, j; | |
561 | struct vxge_tx_priv *txd_priv = | |
562 | vxge_hw_fifo_txdl_private_get(dtr); | |
563 | ||
564 | skb = txd_priv->skb; | |
565 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
566 | frag = &skb_shinfo(skb)->frags[0]; | |
567 | ||
568 | vxge_debug_tx(VXGE_TRACE, | |
569 | "%s: %s:%d fifo_hw = %p dtr = %p " | |
570 | "tcode = 0x%x", fifo->ndev->name, __func__, | |
571 | __LINE__, fifo_hw, dtr, t_code); | |
572 | /* check skb validity */ | |
573 | vxge_assert(skb); | |
574 | vxge_debug_tx(VXGE_TRACE, | |
575 | "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | |
576 | fifo->ndev->name, __func__, __LINE__, | |
577 | skb, txd_priv, frg_cnt); | |
578 | if (unlikely(t_code)) { | |
579 | fifo->stats.tx_errors++; | |
580 | vxge_debug_tx(VXGE_ERR, | |
581 | "%s: tx: dtr %p completed due to " | |
582 | "error t_code %01x", fifo->ndev->name, | |
583 | dtr, t_code); | |
584 | vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | |
585 | } | |
586 | ||
587 | /* for unfragmented skb */ | |
588 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | |
589 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
590 | ||
591 | for (j = 0; j < frg_cnt; j++) { | |
592 | pci_unmap_page(fifo->pdev, | |
593 | txd_priv->dma_buffers[i++], | |
9e903e08 | 594 | skb_frag_size(frag), PCI_DMA_TODEVICE); |
703da5a1 RV |
595 | frag += 1; |
596 | } | |
597 | ||
598 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
599 | ||
600 | /* Updating the statistics block */ | |
62ea0557 | 601 | u64_stats_update_begin(&fifo->stats.syncp); |
703da5a1 RV |
602 | fifo->stats.tx_frms++; |
603 | fifo->stats.tx_bytes += skb->len; | |
62ea0557 | 604 | u64_stats_update_end(&fifo->stats.syncp); |
703da5a1 | 605 | |
ff67df55 BL |
606 | *done_skb++ = skb; |
607 | ||
608 | if (--nr_skb <= 0) { | |
609 | *more = 1; | |
610 | break; | |
611 | } | |
703da5a1 RV |
612 | |
613 | pkt_cnt++; | |
614 | if (pkt_cnt > fifo->indicate_max_pkts) | |
615 | break; | |
616 | ||
617 | } while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | |
618 | &dtr, &t_code) == VXGE_HW_OK); | |
619 | ||
ff67df55 | 620 | *skb_ptr = done_skb; |
98f45da2 JM |
621 | if (netif_tx_queue_stopped(fifo->txq)) |
622 | netif_tx_wake_queue(fifo->txq); | |
703da5a1 | 623 | |
703da5a1 RV |
624 | vxge_debug_entryexit(VXGE_TRACE, |
625 | "%s: %s:%d Exiting...", | |
626 | fifo->ndev->name, __func__, __LINE__); | |
627 | return VXGE_HW_OK; | |
628 | } | |
629 | ||
28679751 | 630 | /* select a vpath to transmit the packet */ |
98f45da2 | 631 | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb) |
703da5a1 RV |
632 | { |
633 | u16 queue_len, counter = 0; | |
634 | if (skb->protocol == htons(ETH_P_IP)) { | |
635 | struct iphdr *ip; | |
636 | struct tcphdr *th; | |
637 | ||
638 | ip = ip_hdr(skb); | |
639 | ||
56f8a75c | 640 | if (!ip_is_fragment(ip)) { |
703da5a1 RV |
641 | th = (struct tcphdr *)(((unsigned char *)ip) + |
642 | ip->ihl*4); | |
643 | ||
644 | queue_len = vdev->no_of_vpath; | |
645 | counter = (ntohs(th->source) + | |
646 | ntohs(th->dest)) & | |
647 | vdev->vpath_selector[queue_len - 1]; | |
648 | if (counter >= queue_len) | |
649 | counter = queue_len - 1; | |
703da5a1 RV |
650 | } |
651 | } | |
652 | return counter; | |
653 | } | |
654 | ||
655 | static enum vxge_hw_status vxge_search_mac_addr_in_list( | |
656 | struct vxge_vpath *vpath, u64 del_mac) | |
657 | { | |
658 | struct list_head *entry, *next; | |
659 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
660 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | |
661 | return TRUE; | |
662 | } | |
663 | return FALSE; | |
664 | } | |
665 | ||
528f7272 JM |
666 | static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) |
667 | { | |
668 | struct vxge_mac_addrs *new_mac_entry; | |
669 | u8 *mac_address = NULL; | |
670 | ||
671 | if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | |
672 | return TRUE; | |
673 | ||
674 | new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | |
675 | if (!new_mac_entry) { | |
676 | vxge_debug_mem(VXGE_ERR, | |
677 | "%s: memory allocation failed", | |
678 | VXGE_DRIVER_NAME); | |
679 | return FALSE; | |
680 | } | |
681 | ||
682 | list_add(&new_mac_entry->item, &vpath->mac_addr_list); | |
683 | ||
684 | /* Copy the new mac address to the list */ | |
685 | mac_address = (u8 *)&new_mac_entry->macaddr; | |
686 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | |
687 | ||
688 | new_mac_entry->state = mac->state; | |
689 | vpath->mac_addr_cnt++; | |
690 | ||
f8d4aa29 | 691 | if (is_multicast_ether_addr(mac->macaddr)) |
528f7272 JM |
692 | vpath->mcast_addr_cnt++; |
693 | ||
694 | return TRUE; | |
695 | } | |
696 | ||
697 | /* Add a mac address to DA table */ | |
698 | static enum vxge_hw_status | |
699 | vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | |
700 | { | |
701 | enum vxge_hw_status status = VXGE_HW_OK; | |
702 | struct vxge_vpath *vpath; | |
703 | enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | |
704 | ||
f8d4aa29 | 705 | if (is_multicast_ether_addr(mac->macaddr)) |
528f7272 JM |
706 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; |
707 | else | |
708 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | |
709 | ||
710 | vpath = &vdev->vpaths[mac->vpath_no]; | |
711 | status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | |
712 | mac->macmask, duplicate_mode); | |
713 | if (status != VXGE_HW_OK) { | |
714 | vxge_debug_init(VXGE_ERR, | |
715 | "DA config add entry failed for vpath:%d", | |
716 | vpath->device_id); | |
717 | } else | |
718 | if (FALSE == vxge_mac_list_add(vpath, mac)) | |
719 | status = -EPERM; | |
720 | ||
721 | return status; | |
722 | } | |
723 | ||
703da5a1 RV |
724 | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) |
725 | { | |
726 | struct macInfo mac_info; | |
727 | u8 *mac_address = NULL; | |
728 | u64 mac_addr = 0, vpath_vector = 0; | |
729 | int vpath_idx = 0; | |
730 | enum vxge_hw_status status = VXGE_HW_OK; | |
731 | struct vxge_vpath *vpath = NULL; | |
703da5a1 RV |
732 | |
733 | mac_address = (u8 *)&mac_addr; | |
734 | memcpy(mac_address, mac_header, ETH_ALEN); | |
735 | ||
736 | /* Is this mac address already in the list? */ | |
737 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
738 | vpath = &vdev->vpaths[vpath_idx]; | |
739 | if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | |
740 | return vpath_idx; | |
741 | } | |
742 | ||
743 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
744 | memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | |
745 | ||
746 | /* Any vpath has room to add mac address to its da table? */ | |
747 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
748 | vpath = &vdev->vpaths[vpath_idx]; | |
749 | if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | |
750 | /* Add this mac address to this vpath */ | |
751 | mac_info.vpath_no = vpath_idx; | |
752 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
753 | status = vxge_add_mac_addr(vdev, &mac_info); | |
754 | if (status != VXGE_HW_OK) | |
755 | return -EPERM; | |
756 | return vpath_idx; | |
757 | } | |
758 | } | |
759 | ||
760 | mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | |
761 | vpath_idx = 0; | |
762 | mac_info.vpath_no = vpath_idx; | |
763 | /* Is the first vpath already selected as catch-basin ? */ | |
764 | vpath = &vdev->vpaths[vpath_idx]; | |
765 | if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | |
766 | /* Add this mac address to this vpath */ | |
767 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | |
768 | return -EPERM; | |
769 | return vpath_idx; | |
770 | } | |
771 | ||
772 | /* Select first vpath as catch-basin */ | |
773 | vpath_vector = vxge_mBIT(vpath->device_id); | |
774 | status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | |
775 | vxge_hw_mgmt_reg_type_mrpcim, | |
776 | 0, | |
777 | (ulong)offsetof( | |
778 | struct vxge_hw_mrpcim_reg, | |
779 | rts_mgr_cbasin_cfg), | |
780 | vpath_vector); | |
781 | if (status != VXGE_HW_OK) { | |
782 | vxge_debug_tx(VXGE_ERR, | |
783 | "%s: Unable to set the vpath-%d in catch-basin mode", | |
784 | VXGE_DRIVER_NAME, vpath->device_id); | |
785 | return -EPERM; | |
786 | } | |
787 | ||
788 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | |
789 | return -EPERM; | |
790 | ||
791 | return vpath_idx; | |
792 | } | |
793 | ||
794 | /** | |
795 | * vxge_xmit | |
796 | * @skb : the socket buffer containing the Tx data. | |
797 | * @dev : device pointer. | |
798 | * | |
799 | * This function is the Tx entry point of the driver. Neterion NIC supports | |
800 | * certain protocol assist features on Tx side, namely CSO, S/G, LSO. | |
703da5a1 | 801 | */ |
61357325 | 802 | static netdev_tx_t |
703da5a1 RV |
803 | vxge_xmit(struct sk_buff *skb, struct net_device *dev) |
804 | { | |
805 | struct vxge_fifo *fifo = NULL; | |
806 | void *dtr_priv; | |
807 | void *dtr = NULL; | |
808 | struct vxgedev *vdev = NULL; | |
809 | enum vxge_hw_status status; | |
810 | int frg_cnt, first_frg_len; | |
811 | skb_frag_t *frag; | |
812 | int i = 0, j = 0, avail; | |
813 | u64 dma_pointer; | |
814 | struct vxge_tx_priv *txdl_priv = NULL; | |
815 | struct __vxge_hw_fifo *fifo_hw; | |
703da5a1 | 816 | int offload_type; |
703da5a1 | 817 | int vpath_no = 0; |
703da5a1 RV |
818 | |
819 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
820 | dev->name, __func__, __LINE__); | |
821 | ||
822 | /* A buffer with no data will be dropped */ | |
823 | if (unlikely(skb->len <= 0)) { | |
824 | vxge_debug_tx(VXGE_ERR, | |
825 | "%s: Buffer has no data..", dev->name); | |
6956d73a | 826 | dev_kfree_skb_any(skb); |
703da5a1 RV |
827 | return NETDEV_TX_OK; |
828 | } | |
829 | ||
5f54cebb | 830 | vdev = netdev_priv(dev); |
703da5a1 RV |
831 | |
832 | if (unlikely(!is_vxge_card_up(vdev))) { | |
833 | vxge_debug_tx(VXGE_ERR, | |
834 | "%s: vdev not initialized", dev->name); | |
6956d73a | 835 | dev_kfree_skb_any(skb); |
703da5a1 RV |
836 | return NETDEV_TX_OK; |
837 | } | |
838 | ||
839 | if (vdev->config.addr_learn_en) { | |
840 | vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | |
841 | if (vpath_no == -EPERM) { | |
842 | vxge_debug_tx(VXGE_ERR, | |
843 | "%s: Failed to store the mac address", | |
844 | dev->name); | |
6956d73a | 845 | dev_kfree_skb_any(skb); |
703da5a1 RV |
846 | return NETDEV_TX_OK; |
847 | } | |
848 | } | |
849 | ||
850 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | |
851 | vpath_no = skb_get_queue_mapping(skb); | |
852 | else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | |
98f45da2 | 853 | vpath_no = vxge_get_vpath_no(vdev, skb); |
703da5a1 RV |
854 | |
855 | vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | |
856 | ||
857 | if (vpath_no >= vdev->no_of_vpath) | |
858 | vpath_no = 0; | |
859 | ||
860 | fifo = &vdev->vpaths[vpath_no].fifo; | |
861 | fifo_hw = fifo->handle; | |
862 | ||
98f45da2 | 863 | if (netif_tx_queue_stopped(fifo->txq)) |
d03848e0 | 864 | return NETDEV_TX_BUSY; |
d03848e0 | 865 | |
703da5a1 RV |
866 | avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); |
867 | if (avail == 0) { | |
868 | vxge_debug_tx(VXGE_ERR, | |
869 | "%s: No free TXDs available", dev->name); | |
870 | fifo->stats.txd_not_free++; | |
98f45da2 | 871 | goto _exit0; |
703da5a1 RV |
872 | } |
873 | ||
4403b371 BL |
874 | /* Last TXD? Stop tx queue to avoid dropping packets. TX |
875 | * completion will resume the queue. | |
876 | */ | |
877 | if (avail == 1) | |
98f45da2 | 878 | netif_tx_stop_queue(fifo->txq); |
4403b371 | 879 | |
703da5a1 RV |
880 | status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); |
881 | if (unlikely(status != VXGE_HW_OK)) { | |
882 | vxge_debug_tx(VXGE_ERR, | |
883 | "%s: Out of descriptors .", dev->name); | |
884 | fifo->stats.txd_out_of_desc++; | |
98f45da2 | 885 | goto _exit0; |
703da5a1 RV |
886 | } |
887 | ||
888 | vxge_debug_tx(VXGE_TRACE, | |
889 | "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | |
890 | dev->name, __func__, __LINE__, | |
891 | fifo_hw, dtr, dtr_priv); | |
892 | ||
eab6d18d | 893 | if (vlan_tx_tag_present(skb)) { |
703da5a1 RV |
894 | u16 vlan_tag = vlan_tx_tag_get(skb); |
895 | vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | |
896 | } | |
897 | ||
898 | first_frg_len = skb_headlen(skb); | |
899 | ||
900 | dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | |
901 | PCI_DMA_TODEVICE); | |
902 | ||
903 | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | |
904 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
703da5a1 | 905 | fifo->stats.pci_map_fail++; |
98f45da2 | 906 | goto _exit0; |
703da5a1 RV |
907 | } |
908 | ||
909 | txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | |
910 | txdl_priv->skb = skb; | |
911 | txdl_priv->dma_buffers[j] = dma_pointer; | |
912 | ||
913 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
914 | vxge_debug_tx(VXGE_TRACE, | |
915 | "%s: %s:%d skb = %p txdl_priv = %p " | |
916 | "frag_cnt = %d dma_pointer = 0x%llx", dev->name, | |
917 | __func__, __LINE__, skb, txdl_priv, | |
918 | frg_cnt, (unsigned long long)dma_pointer); | |
919 | ||
920 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | |
921 | first_frg_len); | |
922 | ||
923 | frag = &skb_shinfo(skb)->frags[0]; | |
924 | for (i = 0; i < frg_cnt; i++) { | |
925 | /* ignore 0 length fragment */ | |
9e903e08 | 926 | if (!skb_frag_size(frag)) |
703da5a1 RV |
927 | continue; |
928 | ||
94d60a7b | 929 | dma_pointer = (u64)skb_frag_dma_map(&fifo->pdev->dev, frag, |
9e903e08 | 930 | 0, skb_frag_size(frag), |
94d60a7b | 931 | DMA_TO_DEVICE); |
703da5a1 | 932 | |
94d60a7b | 933 | if (unlikely(dma_mapping_error(&fifo->pdev->dev, dma_pointer))) |
98f45da2 | 934 | goto _exit2; |
703da5a1 RV |
935 | vxge_debug_tx(VXGE_TRACE, |
936 | "%s: %s:%d frag = %d dma_pointer = 0x%llx", | |
937 | dev->name, __func__, __LINE__, i, | |
938 | (unsigned long long)dma_pointer); | |
939 | ||
940 | txdl_priv->dma_buffers[j] = dma_pointer; | |
941 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | |
9e903e08 | 942 | skb_frag_size(frag)); |
703da5a1 RV |
943 | frag += 1; |
944 | } | |
945 | ||
946 | offload_type = vxge_offload_type(skb); | |
947 | ||
948 | if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | |
703da5a1 RV |
949 | int mss = vxge_tcp_mss(skb); |
950 | if (mss) { | |
98f45da2 | 951 | vxge_debug_tx(VXGE_TRACE, "%s: %s:%d mss = %d", |
703da5a1 RV |
952 | dev->name, __func__, __LINE__, mss); |
953 | vxge_hw_fifo_txdl_mss_set(dtr, mss); | |
954 | } else { | |
955 | vxge_assert(skb->len <= | |
956 | dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | |
957 | vxge_assert(0); | |
958 | goto _exit1; | |
959 | } | |
960 | } | |
961 | ||
962 | if (skb->ip_summed == CHECKSUM_PARTIAL) | |
963 | vxge_hw_fifo_txdl_cksum_set_bits(dtr, | |
964 | VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | |
965 | VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | |
966 | VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | |
967 | ||
968 | vxge_hw_fifo_txdl_post(fifo_hw, dtr); | |
703da5a1 | 969 | |
703da5a1 RV |
970 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", |
971 | dev->name, __func__, __LINE__); | |
6ed10654 | 972 | return NETDEV_TX_OK; |
703da5a1 | 973 | |
98f45da2 | 974 | _exit2: |
703da5a1 | 975 | vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); |
703da5a1 RV |
976 | _exit1: |
977 | j = 0; | |
978 | frag = &skb_shinfo(skb)->frags[0]; | |
979 | ||
980 | pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | |
981 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
982 | ||
983 | for (; j < i; j++) { | |
984 | pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | |
9e903e08 | 985 | skb_frag_size(frag), PCI_DMA_TODEVICE); |
703da5a1 RV |
986 | frag += 1; |
987 | } | |
988 | ||
989 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
98f45da2 JM |
990 | _exit0: |
991 | netif_tx_stop_queue(fifo->txq); | |
6956d73a | 992 | dev_kfree_skb_any(skb); |
703da5a1 | 993 | |
6ed10654 | 994 | return NETDEV_TX_OK; |
703da5a1 RV |
995 | } |
996 | ||
997 | /* | |
998 | * vxge_rx_term | |
999 | * | |
1000 | * Function will be called by hw function to abort all outstanding receive | |
1001 | * descriptors. | |
1002 | */ | |
1003 | static void | |
1004 | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | |
1005 | { | |
1006 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
1007 | struct vxge_rx_priv *rx_priv = | |
1008 | vxge_hw_ring_rxd_private_get(dtrh); | |
1009 | ||
1010 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
1011 | ring->ndev->name, __func__, __LINE__); | |
1012 | if (state != VXGE_HW_RXD_STATE_POSTED) | |
1013 | return; | |
1014 | ||
1015 | pci_unmap_single(ring->pdev, rx_priv->data_dma, | |
1016 | rx_priv->data_size, PCI_DMA_FROMDEVICE); | |
1017 | ||
1018 | dev_kfree_skb(rx_priv->skb); | |
ea11bbe0 | 1019 | rx_priv->skb_data = NULL; |
703da5a1 RV |
1020 | |
1021 | vxge_debug_entryexit(VXGE_TRACE, | |
1022 | "%s: %s:%d Exiting...", | |
1023 | ring->ndev->name, __func__, __LINE__); | |
1024 | } | |
1025 | ||
1026 | /* | |
1027 | * vxge_tx_term | |
1028 | * | |
1029 | * Function will be called to abort all outstanding tx descriptors | |
1030 | */ | |
1031 | static void | |
1032 | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | |
1033 | { | |
1034 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | |
1035 | skb_frag_t *frag; | |
1036 | int i = 0, j, frg_cnt; | |
1037 | struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | |
1038 | struct sk_buff *skb = txd_priv->skb; | |
1039 | ||
1040 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1041 | ||
1042 | if (state != VXGE_HW_TXDL_STATE_POSTED) | |
1043 | return; | |
1044 | ||
1045 | /* check skb validity */ | |
1046 | vxge_assert(skb); | |
1047 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
1048 | frag = &skb_shinfo(skb)->frags[0]; | |
1049 | ||
1050 | /* for unfragmented skb */ | |
1051 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | |
1052 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
1053 | ||
1054 | for (j = 0; j < frg_cnt; j++) { | |
1055 | pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | |
9e903e08 | 1056 | skb_frag_size(frag), PCI_DMA_TODEVICE); |
703da5a1 RV |
1057 | frag += 1; |
1058 | } | |
1059 | ||
1060 | dev_kfree_skb(skb); | |
1061 | ||
1062 | vxge_debug_entryexit(VXGE_TRACE, | |
1063 | "%s:%d Exiting...", __func__, __LINE__); | |
1064 | } | |
1065 | ||
528f7272 JM |
1066 | static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) |
1067 | { | |
1068 | struct list_head *entry, *next; | |
1069 | u64 del_mac = 0; | |
1070 | u8 *mac_address = (u8 *) (&del_mac); | |
1071 | ||
1072 | /* Copy the mac address to delete from the list */ | |
1073 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | |
1074 | ||
1075 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
1076 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | |
1077 | list_del(entry); | |
1078 | kfree((struct vxge_mac_addrs *)entry); | |
1079 | vpath->mac_addr_cnt--; | |
1080 | ||
f8d4aa29 | 1081 | if (is_multicast_ether_addr(mac->macaddr)) |
528f7272 JM |
1082 | vpath->mcast_addr_cnt--; |
1083 | return TRUE; | |
1084 | } | |
1085 | } | |
1086 | ||
1087 | return FALSE; | |
1088 | } | |
1089 | ||
1090 | /* delete a mac address from DA table */ | |
1091 | static enum vxge_hw_status | |
1092 | vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | |
1093 | { | |
1094 | enum vxge_hw_status status = VXGE_HW_OK; | |
1095 | struct vxge_vpath *vpath; | |
1096 | ||
1097 | vpath = &vdev->vpaths[mac->vpath_no]; | |
1098 | status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | |
1099 | mac->macmask); | |
1100 | if (status != VXGE_HW_OK) { | |
1101 | vxge_debug_init(VXGE_ERR, | |
1102 | "DA config delete entry failed for vpath:%d", | |
1103 | vpath->device_id); | |
1104 | } else | |
1105 | vxge_mac_list_del(vpath, mac); | |
1106 | return status; | |
1107 | } | |
1108 | ||
703da5a1 RV |
1109 | /** |
1110 | * vxge_set_multicast | |
1111 | * @dev: pointer to the device structure | |
1112 | * | |
1113 | * Entry point for multicast address enable/disable | |
1114 | * This function is a driver entry point which gets called by the kernel | |
1115 | * whenever multicast addresses must be enabled/disabled. This also gets | |
1116 | * called to set/reset promiscuous mode. Depending on the deivce flag, we | |
1117 | * determine, if multicast address must be enabled or if promiscuous mode | |
1118 | * is to be disabled etc. | |
1119 | */ | |
1120 | static void vxge_set_multicast(struct net_device *dev) | |
1121 | { | |
22bedad3 | 1122 | struct netdev_hw_addr *ha; |
703da5a1 RV |
1123 | struct vxgedev *vdev; |
1124 | int i, mcast_cnt = 0; | |
7adf7d1b JM |
1125 | struct __vxge_hw_device *hldev; |
1126 | struct vxge_vpath *vpath; | |
703da5a1 RV |
1127 | enum vxge_hw_status status = VXGE_HW_OK; |
1128 | struct macInfo mac_info; | |
1129 | int vpath_idx = 0; | |
1130 | struct vxge_mac_addrs *mac_entry; | |
1131 | struct list_head *list_head; | |
1132 | struct list_head *entry, *next; | |
1133 | u8 *mac_address = NULL; | |
1134 | ||
1135 | vxge_debug_entryexit(VXGE_TRACE, | |
1136 | "%s:%d", __func__, __LINE__); | |
1137 | ||
5f54cebb | 1138 | vdev = netdev_priv(dev); |
64699336 | 1139 | hldev = vdev->devh; |
703da5a1 RV |
1140 | |
1141 | if (unlikely(!is_vxge_card_up(vdev))) | |
1142 | return; | |
1143 | ||
1144 | if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | |
1145 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
1146 | vpath = &vdev->vpaths[i]; |
1147 | vxge_assert(vpath->is_open); | |
1148 | status = vxge_hw_vpath_mcast_enable(vpath->handle); | |
1149 | if (status != VXGE_HW_OK) | |
1150 | vxge_debug_init(VXGE_ERR, "failed to enable " | |
1151 | "multicast, status %d", status); | |
703da5a1 RV |
1152 | vdev->all_multi_flg = 1; |
1153 | } | |
7adf7d1b | 1154 | } else if (!(dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { |
703da5a1 | 1155 | for (i = 0; i < vdev->no_of_vpath; i++) { |
7adf7d1b JM |
1156 | vpath = &vdev->vpaths[i]; |
1157 | vxge_assert(vpath->is_open); | |
1158 | status = vxge_hw_vpath_mcast_disable(vpath->handle); | |
1159 | if (status != VXGE_HW_OK) | |
1160 | vxge_debug_init(VXGE_ERR, "failed to disable " | |
1161 | "multicast, status %d", status); | |
1162 | vdev->all_multi_flg = 0; | |
703da5a1 RV |
1163 | } |
1164 | } | |
1165 | ||
703da5a1 RV |
1166 | |
1167 | if (!vdev->config.addr_learn_en) { | |
7adf7d1b JM |
1168 | for (i = 0; i < vdev->no_of_vpath; i++) { |
1169 | vpath = &vdev->vpaths[i]; | |
1170 | vxge_assert(vpath->is_open); | |
1171 | ||
1172 | if (dev->flags & IFF_PROMISC) | |
703da5a1 | 1173 | status = vxge_hw_vpath_promisc_enable( |
7adf7d1b JM |
1174 | vpath->handle); |
1175 | else | |
703da5a1 | 1176 | status = vxge_hw_vpath_promisc_disable( |
7adf7d1b JM |
1177 | vpath->handle); |
1178 | if (status != VXGE_HW_OK) | |
1179 | vxge_debug_init(VXGE_ERR, "failed to %s promisc" | |
1180 | ", status %d", dev->flags&IFF_PROMISC ? | |
1181 | "enable" : "disable", status); | |
703da5a1 RV |
1182 | } |
1183 | } | |
1184 | ||
1185 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
1186 | /* Update individual M_CAST address list */ | |
4cd24eaf | 1187 | if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) { |
703da5a1 RV |
1188 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; |
1189 | list_head = &vdev->vpaths[0].mac_addr_list; | |
4cd24eaf | 1190 | if ((netdev_mc_count(dev) + |
703da5a1 RV |
1191 | (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > |
1192 | vdev->vpaths[0].max_mac_addr_cnt) | |
1193 | goto _set_all_mcast; | |
1194 | ||
1195 | /* Delete previous MC's */ | |
1196 | for (i = 0; i < mcast_cnt; i++) { | |
703da5a1 | 1197 | list_for_each_safe(entry, next, list_head) { |
2c91308f | 1198 | mac_entry = (struct vxge_mac_addrs *)entry; |
703da5a1 RV |
1199 | /* Copy the mac address to delete */ |
1200 | mac_address = (u8 *)&mac_entry->macaddr; | |
1201 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
1202 | ||
f8d4aa29 | 1203 | if (is_multicast_ether_addr(mac_info.macaddr)) { |
703da5a1 RV |
1204 | for (vpath_idx = 0; vpath_idx < |
1205 | vdev->no_of_vpath; | |
1206 | vpath_idx++) { | |
1207 | mac_info.vpath_no = vpath_idx; | |
1208 | status = vxge_del_mac_addr( | |
1209 | vdev, | |
1210 | &mac_info); | |
1211 | } | |
1212 | } | |
1213 | } | |
1214 | } | |
1215 | ||
1216 | /* Add new ones */ | |
22bedad3 JP |
1217 | netdev_for_each_mc_addr(ha, dev) { |
1218 | memcpy(mac_info.macaddr, ha->addr, ETH_ALEN); | |
703da5a1 RV |
1219 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; |
1220 | vpath_idx++) { | |
1221 | mac_info.vpath_no = vpath_idx; | |
1222 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
1223 | status = vxge_add_mac_addr(vdev, &mac_info); | |
1224 | if (status != VXGE_HW_OK) { | |
1225 | vxge_debug_init(VXGE_ERR, | |
1226 | "%s:%d Setting individual" | |
1227 | "multicast address failed", | |
1228 | __func__, __LINE__); | |
1229 | goto _set_all_mcast; | |
1230 | } | |
1231 | } | |
1232 | } | |
1233 | ||
1234 | return; | |
1235 | _set_all_mcast: | |
1236 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | |
1237 | /* Delete previous MC's */ | |
1238 | for (i = 0; i < mcast_cnt; i++) { | |
703da5a1 | 1239 | list_for_each_safe(entry, next, list_head) { |
2c91308f | 1240 | mac_entry = (struct vxge_mac_addrs *)entry; |
703da5a1 RV |
1241 | /* Copy the mac address to delete */ |
1242 | mac_address = (u8 *)&mac_entry->macaddr; | |
1243 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
1244 | ||
f8d4aa29 | 1245 | if (is_multicast_ether_addr(mac_info.macaddr)) |
703da5a1 RV |
1246 | break; |
1247 | } | |
1248 | ||
1249 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | |
1250 | vpath_idx++) { | |
1251 | mac_info.vpath_no = vpath_idx; | |
1252 | status = vxge_del_mac_addr(vdev, &mac_info); | |
1253 | } | |
1254 | } | |
1255 | ||
1256 | /* Enable all multicast */ | |
1257 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
1258 | vpath = &vdev->vpaths[i]; |
1259 | vxge_assert(vpath->is_open); | |
1260 | ||
1261 | status = vxge_hw_vpath_mcast_enable(vpath->handle); | |
703da5a1 RV |
1262 | if (status != VXGE_HW_OK) { |
1263 | vxge_debug_init(VXGE_ERR, | |
1264 | "%s:%d Enabling all multicasts failed", | |
1265 | __func__, __LINE__); | |
1266 | } | |
1267 | vdev->all_multi_flg = 1; | |
1268 | } | |
1269 | dev->flags |= IFF_ALLMULTI; | |
1270 | } | |
1271 | ||
1272 | vxge_debug_entryexit(VXGE_TRACE, | |
1273 | "%s:%d Exiting...", __func__, __LINE__); | |
1274 | } | |
1275 | ||
1276 | /** | |
1277 | * vxge_set_mac_addr | |
1278 | * @dev: pointer to the device structure | |
1279 | * | |
1280 | * Update entry "0" (default MAC addr) | |
1281 | */ | |
1282 | static int vxge_set_mac_addr(struct net_device *dev, void *p) | |
1283 | { | |
1284 | struct sockaddr *addr = p; | |
1285 | struct vxgedev *vdev; | |
2c91308f | 1286 | struct __vxge_hw_device *hldev; |
703da5a1 RV |
1287 | enum vxge_hw_status status = VXGE_HW_OK; |
1288 | struct macInfo mac_info_new, mac_info_old; | |
1289 | int vpath_idx = 0; | |
1290 | ||
1291 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1292 | ||
5f54cebb | 1293 | vdev = netdev_priv(dev); |
703da5a1 RV |
1294 | hldev = vdev->devh; |
1295 | ||
1296 | if (!is_valid_ether_addr(addr->sa_data)) | |
1297 | return -EINVAL; | |
1298 | ||
1299 | memset(&mac_info_new, 0, sizeof(struct macInfo)); | |
1300 | memset(&mac_info_old, 0, sizeof(struct macInfo)); | |
1301 | ||
1302 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d Exiting...", | |
1303 | __func__, __LINE__); | |
1304 | ||
1305 | /* Get the old address */ | |
1306 | memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | |
1307 | ||
1308 | /* Copy the new address */ | |
1309 | memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | |
1310 | ||
1311 | /* First delete the old mac address from all the vpaths | |
1312 | as we can't specify the index while adding new mac address */ | |
1313 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
1314 | struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | |
1315 | if (!vpath->is_open) { | |
1316 | /* This can happen when this interface is added/removed | |
1317 | to the bonding interface. Delete this station address | |
1318 | from the linked list */ | |
1319 | vxge_mac_list_del(vpath, &mac_info_old); | |
1320 | ||
1321 | /* Add this new address to the linked list | |
1322 | for later restoring */ | |
1323 | vxge_mac_list_add(vpath, &mac_info_new); | |
1324 | ||
1325 | continue; | |
1326 | } | |
1327 | /* Delete the station address */ | |
1328 | mac_info_old.vpath_no = vpath_idx; | |
1329 | status = vxge_del_mac_addr(vdev, &mac_info_old); | |
1330 | } | |
1331 | ||
1332 | if (unlikely(!is_vxge_card_up(vdev))) { | |
1333 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
1334 | return VXGE_HW_OK; | |
1335 | } | |
1336 | ||
1337 | /* Set this mac address to all the vpaths */ | |
1338 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
1339 | mac_info_new.vpath_no = vpath_idx; | |
1340 | mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
1341 | status = vxge_add_mac_addr(vdev, &mac_info_new); | |
1342 | if (status != VXGE_HW_OK) | |
1343 | return -EINVAL; | |
1344 | } | |
1345 | ||
1346 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
1347 | ||
1348 | return status; | |
1349 | } | |
1350 | ||
1351 | /* | |
1352 | * vxge_vpath_intr_enable | |
1353 | * @vdev: pointer to vdev | |
1354 | * @vp_id: vpath for which to enable the interrupts | |
1355 | * | |
1356 | * Enables the interrupts for the vpath | |
1357 | */ | |
42821a5b | 1358 | static void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) |
703da5a1 RV |
1359 | { |
1360 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | |
b59c9457 SH |
1361 | int msix_id = 0; |
1362 | int tim_msix_id[4] = {0, 1, 0, 0}; | |
1363 | int alarm_msix_id = VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
1364 | |
1365 | vxge_hw_vpath_intr_enable(vpath->handle); | |
1366 | ||
1367 | if (vdev->config.intr_type == INTA) | |
1368 | vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | |
1369 | else { | |
703da5a1 RV |
1370 | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, |
1371 | alarm_msix_id); | |
1372 | ||
b59c9457 | 1373 | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; |
703da5a1 RV |
1374 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); |
1375 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | |
1376 | ||
1377 | /* enable the alarm vector */ | |
b59c9457 SH |
1378 | msix_id = (vpath->handle->vpath->hldev->first_vp_id * |
1379 | VXGE_HW_VPATH_MSIX_ACTIVE) + alarm_msix_id; | |
1380 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | |
703da5a1 RV |
1381 | } |
1382 | } | |
1383 | ||
1384 | /* | |
1385 | * vxge_vpath_intr_disable | |
1386 | * @vdev: pointer to vdev | |
1387 | * @vp_id: vpath for which to disable the interrupts | |
1388 | * | |
1389 | * Disables the interrupts for the vpath | |
1390 | */ | |
42821a5b | 1391 | static void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) |
703da5a1 RV |
1392 | { |
1393 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | |
4d2a5b40 | 1394 | struct __vxge_hw_device *hldev; |
703da5a1 RV |
1395 | int msix_id; |
1396 | ||
d8ee7071 | 1397 | hldev = pci_get_drvdata(vdev->pdev); |
4d2a5b40 JM |
1398 | |
1399 | vxge_hw_vpath_wait_receive_idle(hldev, vpath->device_id); | |
1400 | ||
703da5a1 RV |
1401 | vxge_hw_vpath_intr_disable(vpath->handle); |
1402 | ||
1403 | if (vdev->config.intr_type == INTA) | |
1404 | vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | |
1405 | else { | |
b59c9457 | 1406 | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; |
703da5a1 RV |
1407 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); |
1408 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | |
1409 | ||
1410 | /* disable the alarm vector */ | |
b59c9457 SH |
1411 | msix_id = (vpath->handle->vpath->hldev->first_vp_id * |
1412 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
1413 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); |
1414 | } | |
1415 | } | |
1416 | ||
528f7272 JM |
1417 | /* list all mac addresses from DA table */ |
1418 | static enum vxge_hw_status | |
1419 | vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, struct macInfo *mac) | |
1420 | { | |
1421 | enum vxge_hw_status status = VXGE_HW_OK; | |
1422 | unsigned char macmask[ETH_ALEN]; | |
1423 | unsigned char macaddr[ETH_ALEN]; | |
1424 | ||
1425 | status = vxge_hw_vpath_mac_addr_get(vpath->handle, | |
1426 | macaddr, macmask); | |
1427 | if (status != VXGE_HW_OK) { | |
1428 | vxge_debug_init(VXGE_ERR, | |
1429 | "DA config list entry failed for vpath:%d", | |
1430 | vpath->device_id); | |
1431 | return status; | |
1432 | } | |
1433 | ||
f75d191b | 1434 | while (!ether_addr_equal(mac->macaddr, macaddr)) { |
528f7272 JM |
1435 | status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, |
1436 | macaddr, macmask); | |
1437 | if (status != VXGE_HW_OK) | |
1438 | break; | |
1439 | } | |
1440 | ||
1441 | return status; | |
1442 | } | |
1443 | ||
1444 | /* Store all mac addresses from the list to the DA table */ | |
1445 | static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | |
1446 | { | |
1447 | enum vxge_hw_status status = VXGE_HW_OK; | |
1448 | struct macInfo mac_info; | |
1449 | u8 *mac_address = NULL; | |
1450 | struct list_head *entry, *next; | |
1451 | ||
1452 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
1453 | ||
1454 | if (vpath->is_open) { | |
1455 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
1456 | mac_address = | |
1457 | (u8 *)& | |
1458 | ((struct vxge_mac_addrs *)entry)->macaddr; | |
1459 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
1460 | ((struct vxge_mac_addrs *)entry)->state = | |
1461 | VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
1462 | /* does this mac address already exist in da table? */ | |
1463 | status = vxge_search_mac_addr_in_da_table(vpath, | |
1464 | &mac_info); | |
1465 | if (status != VXGE_HW_OK) { | |
1466 | /* Add this mac address to the DA table */ | |
1467 | status = vxge_hw_vpath_mac_addr_add( | |
1468 | vpath->handle, mac_info.macaddr, | |
1469 | mac_info.macmask, | |
1470 | VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | |
1471 | if (status != VXGE_HW_OK) { | |
1472 | vxge_debug_init(VXGE_ERR, | |
1473 | "DA add entry failed for vpath:%d", | |
1474 | vpath->device_id); | |
1475 | ((struct vxge_mac_addrs *)entry)->state | |
1476 | = VXGE_LL_MAC_ADDR_IN_LIST; | |
1477 | } | |
1478 | } | |
1479 | } | |
1480 | } | |
1481 | ||
1482 | return status; | |
1483 | } | |
1484 | ||
1485 | /* Store all vlan ids from the list to the vid table */ | |
1486 | static enum vxge_hw_status | |
1487 | vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | |
1488 | { | |
1489 | enum vxge_hw_status status = VXGE_HW_OK; | |
1490 | struct vxgedev *vdev = vpath->vdev; | |
1491 | u16 vid; | |
1492 | ||
53515734 JP |
1493 | if (!vpath->is_open) |
1494 | return status; | |
528f7272 | 1495 | |
53515734 JP |
1496 | for_each_set_bit(vid, vdev->active_vlans, VLAN_N_VID) |
1497 | status = vxge_hw_vpath_vid_add(vpath->handle, vid); | |
528f7272 JM |
1498 | |
1499 | return status; | |
1500 | } | |
1501 | ||
703da5a1 RV |
1502 | /* |
1503 | * vxge_reset_vpath | |
1504 | * @vdev: pointer to vdev | |
1505 | * @vp_id: vpath to reset | |
1506 | * | |
1507 | * Resets the vpath | |
1508 | */ | |
1509 | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | |
1510 | { | |
1511 | enum vxge_hw_status status = VXGE_HW_OK; | |
7adf7d1b | 1512 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; |
703da5a1 RV |
1513 | int ret = 0; |
1514 | ||
1515 | /* check if device is down already */ | |
1516 | if (unlikely(!is_vxge_card_up(vdev))) | |
1517 | return 0; | |
1518 | ||
1519 | /* is device reset already scheduled */ | |
1520 | if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
1521 | return 0; | |
1522 | ||
7adf7d1b JM |
1523 | if (vpath->handle) { |
1524 | if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) { | |
703da5a1 | 1525 | if (is_vxge_card_up(vdev) && |
7adf7d1b | 1526 | vxge_hw_vpath_recover_from_reset(vpath->handle) |
703da5a1 RV |
1527 | != VXGE_HW_OK) { |
1528 | vxge_debug_init(VXGE_ERR, | |
1529 | "vxge_hw_vpath_recover_from_reset" | |
1530 | "failed for vpath:%d", vp_id); | |
1531 | return status; | |
1532 | } | |
1533 | } else { | |
1534 | vxge_debug_init(VXGE_ERR, | |
1535 | "vxge_hw_vpath_reset failed for" | |
1536 | "vpath:%d", vp_id); | |
1537 | return status; | |
1538 | } | |
1539 | } else | |
1540 | return VXGE_HW_FAIL; | |
1541 | ||
7adf7d1b JM |
1542 | vxge_restore_vpath_mac_addr(vpath); |
1543 | vxge_restore_vpath_vid_table(vpath); | |
703da5a1 RV |
1544 | |
1545 | /* Enable all broadcast */ | |
7adf7d1b JM |
1546 | vxge_hw_vpath_bcast_enable(vpath->handle); |
1547 | ||
1548 | /* Enable all multicast */ | |
1549 | if (vdev->all_multi_flg) { | |
1550 | status = vxge_hw_vpath_mcast_enable(vpath->handle); | |
1551 | if (status != VXGE_HW_OK) | |
1552 | vxge_debug_init(VXGE_ERR, | |
1553 | "%s:%d Enabling multicast failed", | |
1554 | __func__, __LINE__); | |
1555 | } | |
703da5a1 RV |
1556 | |
1557 | /* Enable the interrupts */ | |
1558 | vxge_vpath_intr_enable(vdev, vp_id); | |
1559 | ||
1560 | smp_wmb(); | |
1561 | ||
1562 | /* Enable the flow of traffic through the vpath */ | |
7adf7d1b | 1563 | vxge_hw_vpath_enable(vpath->handle); |
703da5a1 RV |
1564 | |
1565 | smp_wmb(); | |
7adf7d1b JM |
1566 | vxge_hw_vpath_rx_doorbell_init(vpath->handle); |
1567 | vpath->ring.last_status = VXGE_HW_OK; | |
703da5a1 RV |
1568 | |
1569 | /* Vpath reset done */ | |
1570 | clear_bit(vp_id, &vdev->vp_reset); | |
1571 | ||
1572 | /* Start the vpath queue */ | |
98f45da2 JM |
1573 | if (netif_tx_queue_stopped(vpath->fifo.txq)) |
1574 | netif_tx_wake_queue(vpath->fifo.txq); | |
703da5a1 RV |
1575 | |
1576 | return ret; | |
1577 | } | |
1578 | ||
16fded7d JM |
1579 | /* Configure CI */ |
1580 | static void vxge_config_ci_for_tti_rti(struct vxgedev *vdev) | |
1581 | { | |
1582 | int i = 0; | |
1583 | ||
1584 | /* Enable CI for RTI */ | |
1585 | if (vdev->config.intr_type == MSI_X) { | |
1586 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1587 | struct __vxge_hw_ring *hw_ring; | |
1588 | ||
1589 | hw_ring = vdev->vpaths[i].ring.handle; | |
1590 | vxge_hw_vpath_dynamic_rti_ci_set(hw_ring); | |
1591 | } | |
1592 | } | |
1593 | ||
1594 | /* Enable CI for TTI */ | |
1595 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1596 | struct __vxge_hw_fifo *hw_fifo = vdev->vpaths[i].fifo.handle; | |
1597 | vxge_hw_vpath_tti_ci_set(hw_fifo); | |
1598 | /* | |
1599 | * For Inta (with or without napi), Set CI ON for only one | |
1600 | * vpath. (Have only one free running timer). | |
1601 | */ | |
1602 | if ((vdev->config.intr_type == INTA) && (i == 0)) | |
1603 | break; | |
1604 | } | |
1605 | ||
1606 | return; | |
1607 | } | |
1608 | ||
703da5a1 RV |
1609 | static int do_vxge_reset(struct vxgedev *vdev, int event) |
1610 | { | |
1611 | enum vxge_hw_status status; | |
1612 | int ret = 0, vp_id, i; | |
1613 | ||
1614 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1615 | ||
1616 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | |
1617 | /* check if device is down already */ | |
1618 | if (unlikely(!is_vxge_card_up(vdev))) | |
1619 | return 0; | |
1620 | ||
1621 | /* is reset already scheduled */ | |
1622 | if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
1623 | return 0; | |
1624 | } | |
1625 | ||
1626 | if (event == VXGE_LL_FULL_RESET) { | |
2e41f644 JM |
1627 | netif_carrier_off(vdev->ndev); |
1628 | ||
703da5a1 RV |
1629 | /* wait for all the vpath reset to complete */ |
1630 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
1631 | while (test_bit(vp_id, &vdev->vp_reset)) | |
1632 | msleep(50); | |
1633 | } | |
1634 | ||
2e41f644 JM |
1635 | netif_carrier_on(vdev->ndev); |
1636 | ||
703da5a1 RV |
1637 | /* if execution mode is set to debug, don't reset the adapter */ |
1638 | if (unlikely(vdev->exec_mode)) { | |
1639 | vxge_debug_init(VXGE_ERR, | |
1640 | "%s: execution mode is debug, returning..", | |
1641 | vdev->ndev->name); | |
7adf7d1b JM |
1642 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); |
1643 | netif_tx_stop_all_queues(vdev->ndev); | |
1644 | return 0; | |
703da5a1 RV |
1645 | } |
1646 | } | |
1647 | ||
1648 | if (event == VXGE_LL_FULL_RESET) { | |
4d2a5b40 | 1649 | vxge_hw_device_wait_receive_idle(vdev->devh); |
703da5a1 RV |
1650 | vxge_hw_device_intr_disable(vdev->devh); |
1651 | ||
1652 | switch (vdev->cric_err_event) { | |
1653 | case VXGE_HW_EVENT_UNKNOWN: | |
d03848e0 | 1654 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
1655 | vxge_debug_init(VXGE_ERR, |
1656 | "fatal: %s: Disabling device due to" | |
1657 | "unknown error", | |
1658 | vdev->ndev->name); | |
1659 | ret = -EPERM; | |
1660 | goto out; | |
1661 | case VXGE_HW_EVENT_RESET_START: | |
1662 | break; | |
1663 | case VXGE_HW_EVENT_RESET_COMPLETE: | |
1664 | case VXGE_HW_EVENT_LINK_DOWN: | |
1665 | case VXGE_HW_EVENT_LINK_UP: | |
1666 | case VXGE_HW_EVENT_ALARM_CLEARED: | |
1667 | case VXGE_HW_EVENT_ECCERR: | |
1668 | case VXGE_HW_EVENT_MRPCIM_ECCERR: | |
1669 | ret = -EPERM; | |
1670 | goto out; | |
1671 | case VXGE_HW_EVENT_FIFO_ERR: | |
1672 | case VXGE_HW_EVENT_VPATH_ERR: | |
1673 | break; | |
1674 | case VXGE_HW_EVENT_CRITICAL_ERR: | |
d03848e0 | 1675 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
1676 | vxge_debug_init(VXGE_ERR, |
1677 | "fatal: %s: Disabling device due to" | |
1678 | "serious error", | |
1679 | vdev->ndev->name); | |
1680 | /* SOP or device reset required */ | |
1681 | /* This event is not currently used */ | |
1682 | ret = -EPERM; | |
1683 | goto out; | |
1684 | case VXGE_HW_EVENT_SERR: | |
d03848e0 | 1685 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
1686 | vxge_debug_init(VXGE_ERR, |
1687 | "fatal: %s: Disabling device due to" | |
1688 | "serious error", | |
1689 | vdev->ndev->name); | |
1690 | ret = -EPERM; | |
1691 | goto out; | |
1692 | case VXGE_HW_EVENT_SRPCIM_SERR: | |
1693 | case VXGE_HW_EVENT_MRPCIM_SERR: | |
1694 | ret = -EPERM; | |
1695 | goto out; | |
1696 | case VXGE_HW_EVENT_SLOT_FREEZE: | |
d03848e0 | 1697 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
1698 | vxge_debug_init(VXGE_ERR, |
1699 | "fatal: %s: Disabling device due to" | |
1700 | "slot freeze", | |
1701 | vdev->ndev->name); | |
1702 | ret = -EPERM; | |
1703 | goto out; | |
1704 | default: | |
1705 | break; | |
1706 | ||
1707 | } | |
1708 | } | |
1709 | ||
1710 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | |
d03848e0 | 1711 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
1712 | |
1713 | if (event == VXGE_LL_FULL_RESET) { | |
1714 | status = vxge_reset_all_vpaths(vdev); | |
1715 | if (status != VXGE_HW_OK) { | |
1716 | vxge_debug_init(VXGE_ERR, | |
1717 | "fatal: %s: can not reset vpaths", | |
1718 | vdev->ndev->name); | |
1719 | ret = -EPERM; | |
1720 | goto out; | |
1721 | } | |
1722 | } | |
1723 | ||
1724 | if (event == VXGE_LL_COMPL_RESET) { | |
1725 | for (i = 0; i < vdev->no_of_vpath; i++) | |
1726 | if (vdev->vpaths[i].handle) { | |
1727 | if (vxge_hw_vpath_recover_from_reset( | |
1728 | vdev->vpaths[i].handle) | |
1729 | != VXGE_HW_OK) { | |
1730 | vxge_debug_init(VXGE_ERR, | |
1731 | "vxge_hw_vpath_recover_" | |
1732 | "from_reset failed for vpath: " | |
1733 | "%d", i); | |
1734 | ret = -EPERM; | |
1735 | goto out; | |
1736 | } | |
1737 | } else { | |
1738 | vxge_debug_init(VXGE_ERR, | |
1739 | "vxge_hw_vpath_reset failed for " | |
1740 | "vpath:%d", i); | |
1741 | ret = -EPERM; | |
1742 | goto out; | |
1743 | } | |
1744 | } | |
1745 | ||
1746 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | |
1747 | /* Reprogram the DA table with populated mac addresses */ | |
1748 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
1749 | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | |
1750 | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | |
1751 | } | |
1752 | ||
1753 | /* enable vpath interrupts */ | |
1754 | for (i = 0; i < vdev->no_of_vpath; i++) | |
1755 | vxge_vpath_intr_enable(vdev, i); | |
1756 | ||
1757 | vxge_hw_device_intr_enable(vdev->devh); | |
1758 | ||
1759 | smp_wmb(); | |
1760 | ||
1761 | /* Indicate card up */ | |
1762 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
1763 | ||
1764 | /* Get the traffic to flow through the vpaths */ | |
1765 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1766 | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | |
1767 | smp_wmb(); | |
1768 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | |
1769 | } | |
1770 | ||
d03848e0 | 1771 | netif_tx_wake_all_queues(vdev->ndev); |
703da5a1 RV |
1772 | } |
1773 | ||
16fded7d JM |
1774 | /* configure CI */ |
1775 | vxge_config_ci_for_tti_rti(vdev); | |
1776 | ||
703da5a1 RV |
1777 | out: |
1778 | vxge_debug_entryexit(VXGE_TRACE, | |
1779 | "%s:%d Exiting...", __func__, __LINE__); | |
1780 | ||
1781 | /* Indicate reset done */ | |
1782 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | |
1783 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | |
1784 | return ret; | |
1785 | } | |
1786 | ||
1787 | /* | |
1788 | * vxge_reset | |
1789 | * @vdev: pointer to ll device | |
1790 | * | |
1791 | * driver may reset the chip on events of serr, eccerr, etc | |
1792 | */ | |
2e41f644 | 1793 | static void vxge_reset(struct work_struct *work) |
703da5a1 | 1794 | { |
2e41f644 JM |
1795 | struct vxgedev *vdev = container_of(work, struct vxgedev, reset_task); |
1796 | ||
1797 | if (!netif_running(vdev->ndev)) | |
1798 | return; | |
1799 | ||
1800 | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | |
703da5a1 RV |
1801 | } |
1802 | ||
1803 | /** | |
1804 | * vxge_poll - Receive handler when Receive Polling is used. | |
1805 | * @dev: pointer to the device structure. | |
1806 | * @budget: Number of packets budgeted to be processed in this iteration. | |
1807 | * | |
1808 | * This function comes into picture only if Receive side is being handled | |
1809 | * through polling (called NAPI in linux). It mostly does what the normal | |
1810 | * Rx interrupt handler does in terms of descriptor and packet processing | |
1811 | * but not in an interrupt context. Also it will process a specified number | |
1812 | * of packets at most in one iteration. This value is passed down by the | |
1813 | * kernel as the function argument 'budget'. | |
1814 | */ | |
1815 | static int vxge_poll_msix(struct napi_struct *napi, int budget) | |
1816 | { | |
16fded7d JM |
1817 | struct vxge_ring *ring = container_of(napi, struct vxge_ring, napi); |
1818 | int pkts_processed; | |
703da5a1 | 1819 | int budget_org = budget; |
703da5a1 | 1820 | |
16fded7d JM |
1821 | ring->budget = budget; |
1822 | ring->pkts_processed = 0; | |
703da5a1 | 1823 | vxge_hw_vpath_poll_rx(ring->handle); |
16fded7d | 1824 | pkts_processed = ring->pkts_processed; |
703da5a1 RV |
1825 | |
1826 | if (ring->pkts_processed < budget_org) { | |
1827 | napi_complete(napi); | |
16fded7d | 1828 | |
703da5a1 RV |
1829 | /* Re enable the Rx interrupts for the vpath */ |
1830 | vxge_hw_channel_msix_unmask( | |
1831 | (struct __vxge_hw_channel *)ring->handle, | |
1832 | ring->rx_vector_no); | |
16fded7d | 1833 | mmiowb(); |
703da5a1 RV |
1834 | } |
1835 | ||
16fded7d JM |
1836 | /* We are copying and returning the local variable, in case if after |
1837 | * clearing the msix interrupt above, if the interrupt fires right | |
1838 | * away which can preempt this NAPI thread */ | |
1839 | return pkts_processed; | |
703da5a1 RV |
1840 | } |
1841 | ||
1842 | static int vxge_poll_inta(struct napi_struct *napi, int budget) | |
1843 | { | |
1844 | struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | |
1845 | int pkts_processed = 0; | |
1846 | int i; | |
1847 | int budget_org = budget; | |
1848 | struct vxge_ring *ring; | |
1849 | ||
d8ee7071 | 1850 | struct __vxge_hw_device *hldev = pci_get_drvdata(vdev->pdev); |
703da5a1 RV |
1851 | |
1852 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1853 | ring = &vdev->vpaths[i].ring; | |
1854 | ring->budget = budget; | |
16fded7d | 1855 | ring->pkts_processed = 0; |
703da5a1 RV |
1856 | vxge_hw_vpath_poll_rx(ring->handle); |
1857 | pkts_processed += ring->pkts_processed; | |
1858 | budget -= ring->pkts_processed; | |
1859 | if (budget <= 0) | |
1860 | break; | |
1861 | } | |
1862 | ||
1863 | VXGE_COMPLETE_ALL_TX(vdev); | |
1864 | ||
1865 | if (pkts_processed < budget_org) { | |
1866 | napi_complete(napi); | |
1867 | /* Re enable the Rx interrupts for the ring */ | |
1868 | vxge_hw_device_unmask_all(hldev); | |
1869 | vxge_hw_device_flush_io(hldev); | |
1870 | } | |
1871 | ||
1872 | return pkts_processed; | |
1873 | } | |
1874 | ||
1875 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1876 | /** | |
1877 | * vxge_netpoll - netpoll event handler entry point | |
1878 | * @dev : pointer to the device structure. | |
1879 | * Description: | |
1880 | * This function will be called by upper layer to check for events on the | |
1881 | * interface in situations where interrupts are disabled. It is used for | |
1882 | * specific in-kernel networking tasks, such as remote consoles and kernel | |
1883 | * debugging over the network (example netdump in RedHat). | |
1884 | */ | |
1885 | static void vxge_netpoll(struct net_device *dev) | |
1886 | { | |
32e819e4 FR |
1887 | struct vxgedev *vdev = netdev_priv(dev); |
1888 | struct pci_dev *pdev = vdev->pdev; | |
1889 | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); | |
1890 | const int irq = pdev->irq; | |
703da5a1 RV |
1891 | |
1892 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1893 | ||
32e819e4 | 1894 | if (pci_channel_offline(pdev)) |
703da5a1 RV |
1895 | return; |
1896 | ||
32e819e4 | 1897 | disable_irq(irq); |
703da5a1 RV |
1898 | vxge_hw_device_clear_tx_rx(hldev); |
1899 | ||
1900 | vxge_hw_device_clear_tx_rx(hldev); | |
1901 | VXGE_COMPLETE_ALL_RX(vdev); | |
1902 | VXGE_COMPLETE_ALL_TX(vdev); | |
1903 | ||
32e819e4 | 1904 | enable_irq(irq); |
703da5a1 RV |
1905 | |
1906 | vxge_debug_entryexit(VXGE_TRACE, | |
1907 | "%s:%d Exiting...", __func__, __LINE__); | |
703da5a1 RV |
1908 | } |
1909 | #endif | |
1910 | ||
1911 | /* RTH configuration */ | |
1912 | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | |
1913 | { | |
1914 | enum vxge_hw_status status = VXGE_HW_OK; | |
1915 | struct vxge_hw_rth_hash_types hash_types; | |
1916 | u8 itable[256] = {0}; /* indirection table */ | |
1917 | u8 mtable[256] = {0}; /* CPU to vpath mapping */ | |
1918 | int index; | |
1919 | ||
1920 | /* | |
1921 | * Filling | |
1922 | * - itable with bucket numbers | |
1923 | * - mtable with bucket-to-vpath mapping | |
1924 | */ | |
1925 | for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | |
1926 | itable[index] = index; | |
1927 | mtable[index] = index % vdev->no_of_vpath; | |
1928 | } | |
1929 | ||
703da5a1 RV |
1930 | /* set indirection table, bucket-to-vpath mapping */ |
1931 | status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | |
1932 | vdev->no_of_vpath, | |
1933 | mtable, itable, | |
1934 | vdev->config.rth_bkt_sz); | |
1935 | if (status != VXGE_HW_OK) { | |
1936 | vxge_debug_init(VXGE_ERR, | |
1937 | "RTH indirection table configuration failed " | |
1938 | "for vpath:%d", vdev->vpaths[0].device_id); | |
1939 | return status; | |
1940 | } | |
1941 | ||
47f01db4 JM |
1942 | /* Fill RTH hash types */ |
1943 | hash_types.hash_type_tcpipv4_en = vdev->config.rth_hash_type_tcpipv4; | |
1944 | hash_types.hash_type_ipv4_en = vdev->config.rth_hash_type_ipv4; | |
1945 | hash_types.hash_type_tcpipv6_en = vdev->config.rth_hash_type_tcpipv6; | |
1946 | hash_types.hash_type_ipv6_en = vdev->config.rth_hash_type_ipv6; | |
1947 | hash_types.hash_type_tcpipv6ex_en = | |
1948 | vdev->config.rth_hash_type_tcpipv6ex; | |
1949 | hash_types.hash_type_ipv6ex_en = vdev->config.rth_hash_type_ipv6ex; | |
1950 | ||
703da5a1 | 1951 | /* |
47f01db4 JM |
1952 | * Because the itable_set() method uses the active_table field |
1953 | * for the target virtual path the RTH config should be updated | |
1954 | * for all VPATHs. The h/w only uses the lowest numbered VPATH | |
1955 | * when steering frames. | |
1956 | */ | |
703da5a1 RV |
1957 | for (index = 0; index < vdev->no_of_vpath; index++) { |
1958 | status = vxge_hw_vpath_rts_rth_set( | |
1959 | vdev->vpaths[index].handle, | |
1960 | vdev->config.rth_algorithm, | |
1961 | &hash_types, | |
1962 | vdev->config.rth_bkt_sz); | |
703da5a1 RV |
1963 | if (status != VXGE_HW_OK) { |
1964 | vxge_debug_init(VXGE_ERR, | |
1965 | "RTH configuration failed for vpath:%d", | |
1966 | vdev->vpaths[index].device_id); | |
1967 | return status; | |
1968 | } | |
1969 | } | |
1970 | ||
1971 | return status; | |
1972 | } | |
1973 | ||
703da5a1 | 1974 | /* reset vpaths */ |
e40c10fc | 1975 | static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) |
703da5a1 | 1976 | { |
703da5a1 | 1977 | enum vxge_hw_status status = VXGE_HW_OK; |
7adf7d1b JM |
1978 | struct vxge_vpath *vpath; |
1979 | int i; | |
703da5a1 | 1980 | |
7adf7d1b JM |
1981 | for (i = 0; i < vdev->no_of_vpath; i++) { |
1982 | vpath = &vdev->vpaths[i]; | |
1983 | if (vpath->handle) { | |
1984 | if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) { | |
703da5a1 RV |
1985 | if (is_vxge_card_up(vdev) && |
1986 | vxge_hw_vpath_recover_from_reset( | |
7adf7d1b | 1987 | vpath->handle) != VXGE_HW_OK) { |
703da5a1 RV |
1988 | vxge_debug_init(VXGE_ERR, |
1989 | "vxge_hw_vpath_recover_" | |
1990 | "from_reset failed for vpath: " | |
1991 | "%d", i); | |
1992 | return status; | |
1993 | } | |
1994 | } else { | |
1995 | vxge_debug_init(VXGE_ERR, | |
1996 | "vxge_hw_vpath_reset failed for " | |
1997 | "vpath:%d", i); | |
1998 | return status; | |
1999 | } | |
2000 | } | |
7adf7d1b JM |
2001 | } |
2002 | ||
703da5a1 RV |
2003 | return status; |
2004 | } | |
2005 | ||
2006 | /* close vpaths */ | |
42821a5b | 2007 | static void vxge_close_vpaths(struct vxgedev *vdev, int index) |
703da5a1 | 2008 | { |
7adf7d1b | 2009 | struct vxge_vpath *vpath; |
703da5a1 | 2010 | int i; |
7adf7d1b | 2011 | |
703da5a1 | 2012 | for (i = index; i < vdev->no_of_vpath; i++) { |
7adf7d1b JM |
2013 | vpath = &vdev->vpaths[i]; |
2014 | ||
2015 | if (vpath->handle && vpath->is_open) { | |
2016 | vxge_hw_vpath_close(vpath->handle); | |
703da5a1 RV |
2017 | vdev->stats.vpaths_open--; |
2018 | } | |
7adf7d1b JM |
2019 | vpath->is_open = 0; |
2020 | vpath->handle = NULL; | |
703da5a1 RV |
2021 | } |
2022 | } | |
2023 | ||
2024 | /* open vpaths */ | |
42821a5b | 2025 | static int vxge_open_vpaths(struct vxgedev *vdev) |
703da5a1 | 2026 | { |
7adf7d1b | 2027 | struct vxge_hw_vpath_attr attr; |
703da5a1 | 2028 | enum vxge_hw_status status; |
7adf7d1b | 2029 | struct vxge_vpath *vpath; |
703da5a1 | 2030 | u32 vp_id = 0; |
7adf7d1b | 2031 | int i; |
703da5a1 RV |
2032 | |
2033 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b | 2034 | vpath = &vdev->vpaths[i]; |
7adf7d1b | 2035 | vxge_assert(vpath->is_configured); |
e7935c96 JM |
2036 | |
2037 | if (!vdev->titan1) { | |
2038 | struct vxge_hw_vp_config *vcfg; | |
2039 | vcfg = &vdev->devh->config.vp_config[vpath->device_id]; | |
2040 | ||
2041 | vcfg->rti.urange_a = RTI_T1A_RX_URANGE_A; | |
2042 | vcfg->rti.urange_b = RTI_T1A_RX_URANGE_B; | |
2043 | vcfg->rti.urange_c = RTI_T1A_RX_URANGE_C; | |
2044 | vcfg->tti.uec_a = TTI_T1A_TX_UFC_A; | |
2045 | vcfg->tti.uec_b = TTI_T1A_TX_UFC_B; | |
2046 | vcfg->tti.uec_c = TTI_T1A_TX_UFC_C(vdev->mtu); | |
2047 | vcfg->tti.uec_d = TTI_T1A_TX_UFC_D(vdev->mtu); | |
2048 | vcfg->tti.ltimer_val = VXGE_T1A_TTI_LTIMER_VAL; | |
2049 | vcfg->tti.rtimer_val = VXGE_T1A_TTI_RTIMER_VAL; | |
2050 | } | |
2051 | ||
7adf7d1b | 2052 | attr.vp_id = vpath->device_id; |
703da5a1 RV |
2053 | attr.fifo_attr.callback = vxge_xmit_compl; |
2054 | attr.fifo_attr.txdl_term = vxge_tx_term; | |
2055 | attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | |
7adf7d1b | 2056 | attr.fifo_attr.userdata = &vpath->fifo; |
703da5a1 RV |
2057 | |
2058 | attr.ring_attr.callback = vxge_rx_1b_compl; | |
2059 | attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | |
2060 | attr.ring_attr.rxd_term = vxge_rx_term; | |
2061 | attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | |
7adf7d1b | 2062 | attr.ring_attr.userdata = &vpath->ring; |
703da5a1 | 2063 | |
7adf7d1b JM |
2064 | vpath->ring.ndev = vdev->ndev; |
2065 | vpath->ring.pdev = vdev->pdev; | |
528f7272 | 2066 | |
7adf7d1b | 2067 | status = vxge_hw_vpath_open(vdev->devh, &attr, &vpath->handle); |
703da5a1 | 2068 | if (status == VXGE_HW_OK) { |
7adf7d1b | 2069 | vpath->fifo.handle = |
703da5a1 | 2070 | (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; |
7adf7d1b | 2071 | vpath->ring.handle = |
703da5a1 | 2072 | (struct __vxge_hw_ring *)attr.ring_attr.userdata; |
7adf7d1b | 2073 | vpath->fifo.tx_steering_type = |
703da5a1 | 2074 | vdev->config.tx_steering_type; |
7adf7d1b JM |
2075 | vpath->fifo.ndev = vdev->ndev; |
2076 | vpath->fifo.pdev = vdev->pdev; | |
827da44c JS |
2077 | |
2078 | u64_stats_init(&vpath->fifo.stats.syncp); | |
2079 | u64_stats_init(&vpath->ring.stats.syncp); | |
2080 | ||
98f45da2 JM |
2081 | if (vdev->config.tx_steering_type) |
2082 | vpath->fifo.txq = | |
2083 | netdev_get_tx_queue(vdev->ndev, i); | |
2084 | else | |
2085 | vpath->fifo.txq = | |
2086 | netdev_get_tx_queue(vdev->ndev, 0); | |
7adf7d1b | 2087 | vpath->fifo.indicate_max_pkts = |
703da5a1 | 2088 | vdev->config.fifo_indicate_max_pkts; |
16fded7d | 2089 | vpath->fifo.tx_vector_no = 0; |
7adf7d1b | 2090 | vpath->ring.rx_vector_no = 0; |
b81b3733 | 2091 | vpath->ring.rx_hwts = vdev->rx_hwts; |
7adf7d1b JM |
2092 | vpath->is_open = 1; |
2093 | vdev->vp_handles[i] = vpath->handle; | |
7adf7d1b | 2094 | vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip; |
703da5a1 RV |
2095 | vdev->stats.vpaths_open++; |
2096 | } else { | |
2097 | vdev->stats.vpath_open_fail++; | |
528f7272 JM |
2098 | vxge_debug_init(VXGE_ERR, "%s: vpath: %d failed to " |
2099 | "open with status: %d", | |
2100 | vdev->ndev->name, vpath->device_id, | |
2101 | status); | |
703da5a1 RV |
2102 | vxge_close_vpaths(vdev, 0); |
2103 | return -EPERM; | |
2104 | } | |
2105 | ||
7adf7d1b | 2106 | vp_id = vpath->handle->vpath->vp_id; |
703da5a1 RV |
2107 | vdev->vpaths_deployed |= vxge_mBIT(vp_id); |
2108 | } | |
528f7272 | 2109 | |
703da5a1 RV |
2110 | return VXGE_HW_OK; |
2111 | } | |
2112 | ||
16fded7d JM |
2113 | /** |
2114 | * adaptive_coalesce_tx_interrupts - Changes the interrupt coalescing | |
2115 | * if the interrupts are not within a range | |
2116 | * @fifo: pointer to transmit fifo structure | |
2117 | * Description: The function changes boundary timer and restriction timer | |
2118 | * value depends on the traffic | |
2119 | * Return Value: None | |
2120 | */ | |
2121 | static void adaptive_coalesce_tx_interrupts(struct vxge_fifo *fifo) | |
2122 | { | |
2123 | fifo->interrupt_count++; | |
f6e92d10 | 2124 | if (time_before(fifo->jiffies + HZ / 100, jiffies)) { |
16fded7d JM |
2125 | struct __vxge_hw_fifo *hw_fifo = fifo->handle; |
2126 | ||
2127 | fifo->jiffies = jiffies; | |
2128 | if (fifo->interrupt_count > VXGE_T1A_MAX_TX_INTERRUPT_COUNT && | |
2129 | hw_fifo->rtimer != VXGE_TTI_RTIMER_ADAPT_VAL) { | |
2130 | hw_fifo->rtimer = VXGE_TTI_RTIMER_ADAPT_VAL; | |
2131 | vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo); | |
2132 | } else if (hw_fifo->rtimer != 0) { | |
2133 | hw_fifo->rtimer = 0; | |
2134 | vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo); | |
2135 | } | |
2136 | fifo->interrupt_count = 0; | |
2137 | } | |
2138 | } | |
2139 | ||
2140 | /** | |
2141 | * adaptive_coalesce_rx_interrupts - Changes the interrupt coalescing | |
2142 | * if the interrupts are not within a range | |
2143 | * @ring: pointer to receive ring structure | |
2144 | * Description: The function increases of decreases the packet counts within | |
2145 | * the ranges of traffic utilization, if the interrupts due to this ring are | |
2146 | * not within a fixed range. | |
2147 | * Return Value: Nothing | |
2148 | */ | |
2149 | static void adaptive_coalesce_rx_interrupts(struct vxge_ring *ring) | |
2150 | { | |
2151 | ring->interrupt_count++; | |
f6e92d10 | 2152 | if (time_before(ring->jiffies + HZ / 100, jiffies)) { |
16fded7d JM |
2153 | struct __vxge_hw_ring *hw_ring = ring->handle; |
2154 | ||
2155 | ring->jiffies = jiffies; | |
2156 | if (ring->interrupt_count > VXGE_T1A_MAX_INTERRUPT_COUNT && | |
2157 | hw_ring->rtimer != VXGE_RTI_RTIMER_ADAPT_VAL) { | |
2158 | hw_ring->rtimer = VXGE_RTI_RTIMER_ADAPT_VAL; | |
2159 | vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring); | |
2160 | } else if (hw_ring->rtimer != 0) { | |
2161 | hw_ring->rtimer = 0; | |
2162 | vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring); | |
2163 | } | |
2164 | ring->interrupt_count = 0; | |
2165 | } | |
2166 | } | |
2167 | ||
703da5a1 RV |
2168 | /* |
2169 | * vxge_isr_napi | |
2170 | * @irq: the irq of the device. | |
2171 | * @dev_id: a void pointer to the hldev structure of the Titan device | |
2172 | * @ptregs: pointer to the registers pushed on the stack. | |
2173 | * | |
2174 | * This function is the ISR handler of the device when napi is enabled. It | |
2175 | * identifies the reason for the interrupt and calls the relevant service | |
2176 | * routines. | |
2177 | */ | |
2178 | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | |
2179 | { | |
703da5a1 | 2180 | struct net_device *dev; |
a5d165b5 | 2181 | struct __vxge_hw_device *hldev; |
703da5a1 RV |
2182 | u64 reason; |
2183 | enum vxge_hw_status status; | |
2c91308f | 2184 | struct vxgedev *vdev = (struct vxgedev *)dev_id; |
703da5a1 RV |
2185 | |
2186 | vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
2187 | ||
a5d165b5 | 2188 | dev = vdev->ndev; |
d8ee7071 | 2189 | hldev = pci_get_drvdata(vdev->pdev); |
703da5a1 RV |
2190 | |
2191 | if (pci_channel_offline(vdev->pdev)) | |
2192 | return IRQ_NONE; | |
2193 | ||
2194 | if (unlikely(!is_vxge_card_up(vdev))) | |
4d2a5b40 | 2195 | return IRQ_HANDLED; |
703da5a1 | 2196 | |
528f7272 | 2197 | status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, &reason); |
703da5a1 RV |
2198 | if (status == VXGE_HW_OK) { |
2199 | vxge_hw_device_mask_all(hldev); | |
2200 | ||
2201 | if (reason & | |
2202 | VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | |
2203 | vdev->vpaths_deployed >> | |
2204 | (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | |
2205 | ||
2206 | vxge_hw_device_clear_tx_rx(hldev); | |
2207 | napi_schedule(&vdev->napi); | |
2208 | vxge_debug_intr(VXGE_TRACE, | |
2209 | "%s:%d Exiting...", __func__, __LINE__); | |
2210 | return IRQ_HANDLED; | |
2211 | } else | |
2212 | vxge_hw_device_unmask_all(hldev); | |
2213 | } else if (unlikely((status == VXGE_HW_ERR_VPATH) || | |
2214 | (status == VXGE_HW_ERR_CRITICAL) || | |
2215 | (status == VXGE_HW_ERR_FIFO))) { | |
2216 | vxge_hw_device_mask_all(hldev); | |
2217 | vxge_hw_device_flush_io(hldev); | |
2218 | return IRQ_HANDLED; | |
2219 | } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | |
2220 | return IRQ_HANDLED; | |
2221 | ||
2222 | vxge_debug_intr(VXGE_TRACE, "%s:%d Exiting...", __func__, __LINE__); | |
2223 | return IRQ_NONE; | |
2224 | } | |
2225 | ||
2226 | #ifdef CONFIG_PCI_MSI | |
2227 | ||
16fded7d | 2228 | static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id) |
703da5a1 RV |
2229 | { |
2230 | struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | |
2231 | ||
16fded7d JM |
2232 | adaptive_coalesce_tx_interrupts(fifo); |
2233 | ||
2234 | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)fifo->handle, | |
2235 | fifo->tx_vector_no); | |
2236 | ||
2237 | vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)fifo->handle, | |
2238 | fifo->tx_vector_no); | |
2239 | ||
703da5a1 RV |
2240 | VXGE_COMPLETE_VPATH_TX(fifo); |
2241 | ||
16fded7d JM |
2242 | vxge_hw_channel_msix_unmask((struct __vxge_hw_channel *)fifo->handle, |
2243 | fifo->tx_vector_no); | |
2244 | ||
2245 | mmiowb(); | |
2246 | ||
703da5a1 RV |
2247 | return IRQ_HANDLED; |
2248 | } | |
2249 | ||
16fded7d | 2250 | static irqreturn_t vxge_rx_msix_napi_handle(int irq, void *dev_id) |
703da5a1 RV |
2251 | { |
2252 | struct vxge_ring *ring = (struct vxge_ring *)dev_id; | |
2253 | ||
16fded7d JM |
2254 | adaptive_coalesce_rx_interrupts(ring); |
2255 | ||
703da5a1 | 2256 | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, |
16fded7d JM |
2257 | ring->rx_vector_no); |
2258 | ||
2259 | vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)ring->handle, | |
2260 | ring->rx_vector_no); | |
703da5a1 RV |
2261 | |
2262 | napi_schedule(&ring->napi); | |
2263 | return IRQ_HANDLED; | |
2264 | } | |
2265 | ||
2266 | static irqreturn_t | |
2267 | vxge_alarm_msix_handle(int irq, void *dev_id) | |
2268 | { | |
2269 | int i; | |
2270 | enum vxge_hw_status status; | |
2271 | struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | |
2272 | struct vxgedev *vdev = vpath->vdev; | |
b59c9457 SH |
2273 | int msix_id = (vpath->handle->vpath->vp_id * |
2274 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
2275 | |
2276 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
25985edc | 2277 | /* Reduce the chance of losing alarm interrupts by masking |
16fded7d JM |
2278 | * the vector. A pending bit will be set if an alarm is |
2279 | * generated and on unmask the interrupt will be fired. | |
2280 | */ | |
b59c9457 | 2281 | vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, msix_id); |
16fded7d JM |
2282 | vxge_hw_vpath_msix_clear(vdev->vpaths[i].handle, msix_id); |
2283 | mmiowb(); | |
703da5a1 RV |
2284 | |
2285 | status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | |
2286 | vdev->exec_mode); | |
2287 | if (status == VXGE_HW_OK) { | |
703da5a1 | 2288 | vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, |
16fded7d JM |
2289 | msix_id); |
2290 | mmiowb(); | |
703da5a1 RV |
2291 | continue; |
2292 | } | |
2293 | vxge_debug_intr(VXGE_ERR, | |
2294 | "%s: vxge_hw_vpath_alarm_process failed %x ", | |
2295 | VXGE_DRIVER_NAME, status); | |
2296 | } | |
2297 | return IRQ_HANDLED; | |
2298 | } | |
2299 | ||
2300 | static int vxge_alloc_msix(struct vxgedev *vdev) | |
2301 | { | |
2302 | int j, i, ret = 0; | |
b59c9457 | 2303 | int msix_intr_vect = 0, temp; |
703da5a1 RV |
2304 | vdev->intr_cnt = 0; |
2305 | ||
b59c9457 | 2306 | start: |
703da5a1 RV |
2307 | /* Tx/Rx MSIX Vectors count */ |
2308 | vdev->intr_cnt = vdev->no_of_vpath * 2; | |
2309 | ||
2310 | /* Alarm MSIX Vectors count */ | |
2311 | vdev->intr_cnt++; | |
2312 | ||
baeb2ffa JP |
2313 | vdev->entries = kcalloc(vdev->intr_cnt, sizeof(struct msix_entry), |
2314 | GFP_KERNEL); | |
703da5a1 RV |
2315 | if (!vdev->entries) { |
2316 | vxge_debug_init(VXGE_ERR, | |
2317 | "%s: memory allocation failed", | |
2318 | VXGE_DRIVER_NAME); | |
cc413d90 MS |
2319 | ret = -ENOMEM; |
2320 | goto alloc_entries_failed; | |
703da5a1 RV |
2321 | } |
2322 | ||
baeb2ffa JP |
2323 | vdev->vxge_entries = kcalloc(vdev->intr_cnt, |
2324 | sizeof(struct vxge_msix_entry), | |
2325 | GFP_KERNEL); | |
703da5a1 RV |
2326 | if (!vdev->vxge_entries) { |
2327 | vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | |
2328 | VXGE_DRIVER_NAME); | |
cc413d90 MS |
2329 | ret = -ENOMEM; |
2330 | goto alloc_vxge_entries_failed; | |
703da5a1 RV |
2331 | } |
2332 | ||
b59c9457 | 2333 | for (i = 0, j = 0; i < vdev->no_of_vpath; i++) { |
703da5a1 RV |
2334 | |
2335 | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | |
2336 | ||
2337 | /* Initialize the fifo vector */ | |
2338 | vdev->entries[j].entry = msix_intr_vect; | |
2339 | vdev->vxge_entries[j].entry = msix_intr_vect; | |
2340 | vdev->vxge_entries[j].in_use = 0; | |
2341 | j++; | |
2342 | ||
2343 | /* Initialize the ring vector */ | |
2344 | vdev->entries[j].entry = msix_intr_vect + 1; | |
2345 | vdev->vxge_entries[j].entry = msix_intr_vect + 1; | |
2346 | vdev->vxge_entries[j].in_use = 0; | |
2347 | j++; | |
2348 | } | |
2349 | ||
2350 | /* Initialize the alarm vector */ | |
b59c9457 SH |
2351 | vdev->entries[j].entry = VXGE_ALARM_MSIX_ID; |
2352 | vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
2353 | vdev->vxge_entries[j].in_use = 0; |
2354 | ||
9644cdcd AG |
2355 | ret = pci_enable_msix_range(vdev->pdev, |
2356 | vdev->entries, 3, vdev->intr_cnt); | |
2357 | if (ret < 0) { | |
2358 | ret = -ENODEV; | |
2359 | goto enable_msix_failed; | |
2360 | } else if (ret < vdev->intr_cnt) { | |
2361 | pci_disable_msix(vdev->pdev); | |
2362 | ||
703da5a1 RV |
2363 | vxge_debug_init(VXGE_ERR, |
2364 | "%s: MSI-X enable failed for %d vectors, ret: %d", | |
b59c9457 | 2365 | VXGE_DRIVER_NAME, vdev->intr_cnt, ret); |
9644cdcd | 2366 | if (max_config_vpath != VXGE_USE_DEFAULT) { |
cc413d90 MS |
2367 | ret = -ENODEV; |
2368 | goto enable_msix_failed; | |
2369 | } | |
2370 | ||
703da5a1 RV |
2371 | kfree(vdev->entries); |
2372 | kfree(vdev->vxge_entries); | |
2373 | vdev->entries = NULL; | |
2374 | vdev->vxge_entries = NULL; | |
b59c9457 SH |
2375 | /* Try with less no of vector by reducing no of vpaths count */ |
2376 | temp = (ret - 1)/2; | |
2377 | vxge_close_vpaths(vdev, temp); | |
2378 | vdev->no_of_vpath = temp; | |
2379 | goto start; | |
cc413d90 | 2380 | } |
703da5a1 | 2381 | return 0; |
cc413d90 MS |
2382 | |
2383 | enable_msix_failed: | |
2384 | kfree(vdev->vxge_entries); | |
2385 | alloc_vxge_entries_failed: | |
2386 | kfree(vdev->entries); | |
2387 | alloc_entries_failed: | |
2388 | return ret; | |
703da5a1 RV |
2389 | } |
2390 | ||
2391 | static int vxge_enable_msix(struct vxgedev *vdev) | |
2392 | { | |
2393 | ||
2394 | int i, ret = 0; | |
703da5a1 | 2395 | /* 0 - Tx, 1 - Rx */ |
b59c9457 SH |
2396 | int tim_msix_id[4] = {0, 1, 0, 0}; |
2397 | ||
703da5a1 RV |
2398 | vdev->intr_cnt = 0; |
2399 | ||
2400 | /* allocate msix vectors */ | |
2401 | ret = vxge_alloc_msix(vdev); | |
2402 | if (!ret) { | |
703da5a1 | 2403 | for (i = 0; i < vdev->no_of_vpath; i++) { |
7adf7d1b | 2404 | struct vxge_vpath *vpath = &vdev->vpaths[i]; |
703da5a1 | 2405 | |
7adf7d1b JM |
2406 | /* If fifo or ring are not enabled, the MSIX vector for |
2407 | * it should be set to 0. | |
2408 | */ | |
2409 | vpath->ring.rx_vector_no = (vpath->device_id * | |
2410 | VXGE_HW_VPATH_MSIX_ACTIVE) + 1; | |
703da5a1 | 2411 | |
16fded7d JM |
2412 | vpath->fifo.tx_vector_no = (vpath->device_id * |
2413 | VXGE_HW_VPATH_MSIX_ACTIVE); | |
2414 | ||
7adf7d1b JM |
2415 | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, |
2416 | VXGE_ALARM_MSIX_ID); | |
703da5a1 RV |
2417 | } |
2418 | } | |
2419 | ||
2420 | return ret; | |
2421 | } | |
2422 | ||
2423 | static void vxge_rem_msix_isr(struct vxgedev *vdev) | |
2424 | { | |
2425 | int intr_cnt; | |
2426 | ||
b59c9457 | 2427 | for (intr_cnt = 0; intr_cnt < (vdev->no_of_vpath * 2 + 1); |
703da5a1 RV |
2428 | intr_cnt++) { |
2429 | if (vdev->vxge_entries[intr_cnt].in_use) { | |
2430 | synchronize_irq(vdev->entries[intr_cnt].vector); | |
2431 | free_irq(vdev->entries[intr_cnt].vector, | |
2432 | vdev->vxge_entries[intr_cnt].arg); | |
2433 | vdev->vxge_entries[intr_cnt].in_use = 0; | |
2434 | } | |
2435 | } | |
2436 | ||
2437 | kfree(vdev->entries); | |
2438 | kfree(vdev->vxge_entries); | |
2439 | vdev->entries = NULL; | |
2440 | vdev->vxge_entries = NULL; | |
2441 | ||
2442 | if (vdev->config.intr_type == MSI_X) | |
2443 | pci_disable_msix(vdev->pdev); | |
2444 | } | |
2445 | #endif | |
2446 | ||
2447 | static void vxge_rem_isr(struct vxgedev *vdev) | |
2448 | { | |
703da5a1 RV |
2449 | #ifdef CONFIG_PCI_MSI |
2450 | if (vdev->config.intr_type == MSI_X) { | |
2451 | vxge_rem_msix_isr(vdev); | |
2452 | } else | |
2453 | #endif | |
2454 | if (vdev->config.intr_type == INTA) { | |
2455 | synchronize_irq(vdev->pdev->irq); | |
a5d165b5 | 2456 | free_irq(vdev->pdev->irq, vdev); |
703da5a1 RV |
2457 | } |
2458 | } | |
2459 | ||
2460 | static int vxge_add_isr(struct vxgedev *vdev) | |
2461 | { | |
2462 | int ret = 0; | |
703da5a1 RV |
2463 | #ifdef CONFIG_PCI_MSI |
2464 | int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | |
703da5a1 RV |
2465 | int pci_fun = PCI_FUNC(vdev->pdev->devfn); |
2466 | ||
2467 | if (vdev->config.intr_type == MSI_X) | |
2468 | ret = vxge_enable_msix(vdev); | |
2469 | ||
2470 | if (ret) { | |
2471 | vxge_debug_init(VXGE_ERR, | |
2472 | "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | |
eb5f10c2 SH |
2473 | vxge_debug_init(VXGE_ERR, |
2474 | "%s: Defaulting to INTA", VXGE_DRIVER_NAME); | |
2475 | vdev->config.intr_type = INTA; | |
703da5a1 RV |
2476 | } |
2477 | ||
2478 | if (vdev->config.intr_type == MSI_X) { | |
2479 | for (intr_idx = 0; | |
2480 | intr_idx < (vdev->no_of_vpath * | |
2481 | VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | |
2482 | ||
2483 | msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | |
2484 | irq_req = 0; | |
2485 | ||
2486 | switch (msix_idx) { | |
2487 | case 0: | |
2488 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | |
b59c9457 SH |
2489 | "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d", |
2490 | vdev->ndev->name, | |
2491 | vdev->entries[intr_cnt].entry, | |
2492 | pci_fun, vp_idx); | |
703da5a1 RV |
2493 | ret = request_irq( |
2494 | vdev->entries[intr_cnt].vector, | |
2495 | vxge_tx_msix_handle, 0, | |
2496 | vdev->desc[intr_cnt], | |
2497 | &vdev->vpaths[vp_idx].fifo); | |
2498 | vdev->vxge_entries[intr_cnt].arg = | |
2499 | &vdev->vpaths[vp_idx].fifo; | |
2500 | irq_req = 1; | |
2501 | break; | |
2502 | case 1: | |
2503 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | |
b59c9457 SH |
2504 | "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d", |
2505 | vdev->ndev->name, | |
2506 | vdev->entries[intr_cnt].entry, | |
2507 | pci_fun, vp_idx); | |
703da5a1 RV |
2508 | ret = request_irq( |
2509 | vdev->entries[intr_cnt].vector, | |
2510 | vxge_rx_msix_napi_handle, | |
2511 | 0, | |
2512 | vdev->desc[intr_cnt], | |
2513 | &vdev->vpaths[vp_idx].ring); | |
2514 | vdev->vxge_entries[intr_cnt].arg = | |
2515 | &vdev->vpaths[vp_idx].ring; | |
2516 | irq_req = 1; | |
2517 | break; | |
2518 | } | |
2519 | ||
2520 | if (ret) { | |
2521 | vxge_debug_init(VXGE_ERR, | |
2522 | "%s: MSIX - %d Registration failed", | |
2523 | vdev->ndev->name, intr_cnt); | |
2524 | vxge_rem_msix_isr(vdev); | |
eb5f10c2 SH |
2525 | vdev->config.intr_type = INTA; |
2526 | vxge_debug_init(VXGE_ERR, | |
2527 | "%s: Defaulting to INTA" | |
2528 | , vdev->ndev->name); | |
703da5a1 | 2529 | goto INTA_MODE; |
703da5a1 RV |
2530 | } |
2531 | ||
2532 | if (irq_req) { | |
2533 | /* We requested for this msix interrupt */ | |
2534 | vdev->vxge_entries[intr_cnt].in_use = 1; | |
b59c9457 SH |
2535 | msix_idx += vdev->vpaths[vp_idx].device_id * |
2536 | VXGE_HW_VPATH_MSIX_ACTIVE; | |
703da5a1 RV |
2537 | vxge_hw_vpath_msix_unmask( |
2538 | vdev->vpaths[vp_idx].handle, | |
b59c9457 | 2539 | msix_idx); |
703da5a1 RV |
2540 | intr_cnt++; |
2541 | } | |
2542 | ||
2543 | /* Point to next vpath handler */ | |
8e95a202 JP |
2544 | if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) && |
2545 | (vp_idx < (vdev->no_of_vpath - 1))) | |
2546 | vp_idx++; | |
703da5a1 RV |
2547 | } |
2548 | ||
b59c9457 | 2549 | intr_cnt = vdev->no_of_vpath * 2; |
703da5a1 | 2550 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, |
b59c9457 SH |
2551 | "%s:vxge:MSI-X %d - Alarm - fn:%d", |
2552 | vdev->ndev->name, | |
2553 | vdev->entries[intr_cnt].entry, | |
2554 | pci_fun); | |
703da5a1 RV |
2555 | /* For Alarm interrupts */ |
2556 | ret = request_irq(vdev->entries[intr_cnt].vector, | |
2557 | vxge_alarm_msix_handle, 0, | |
2558 | vdev->desc[intr_cnt], | |
b59c9457 | 2559 | &vdev->vpaths[0]); |
703da5a1 RV |
2560 | if (ret) { |
2561 | vxge_debug_init(VXGE_ERR, | |
2562 | "%s: MSIX - %d Registration failed", | |
2563 | vdev->ndev->name, intr_cnt); | |
2564 | vxge_rem_msix_isr(vdev); | |
eb5f10c2 SH |
2565 | vdev->config.intr_type = INTA; |
2566 | vxge_debug_init(VXGE_ERR, | |
2567 | "%s: Defaulting to INTA", | |
2568 | vdev->ndev->name); | |
703da5a1 | 2569 | goto INTA_MODE; |
703da5a1 RV |
2570 | } |
2571 | ||
b59c9457 SH |
2572 | msix_idx = (vdev->vpaths[0].handle->vpath->vp_id * |
2573 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 | 2574 | vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, |
b59c9457 | 2575 | msix_idx); |
703da5a1 | 2576 | vdev->vxge_entries[intr_cnt].in_use = 1; |
b59c9457 | 2577 | vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0]; |
703da5a1 RV |
2578 | } |
2579 | INTA_MODE: | |
2580 | #endif | |
703da5a1 RV |
2581 | |
2582 | if (vdev->config.intr_type == INTA) { | |
b59c9457 SH |
2583 | snprintf(vdev->desc[0], VXGE_INTR_STRLEN, |
2584 | "%s:vxge:INTA", vdev->ndev->name); | |
eb5f10c2 SH |
2585 | vxge_hw_device_set_intr_type(vdev->devh, |
2586 | VXGE_HW_INTR_MODE_IRQLINE); | |
16fded7d JM |
2587 | |
2588 | vxge_hw_vpath_tti_ci_set(vdev->vpaths[0].fifo.handle); | |
2589 | ||
703da5a1 RV |
2590 | ret = request_irq((int) vdev->pdev->irq, |
2591 | vxge_isr_napi, | |
a5d165b5 | 2592 | IRQF_SHARED, vdev->desc[0], vdev); |
703da5a1 RV |
2593 | if (ret) { |
2594 | vxge_debug_init(VXGE_ERR, | |
2595 | "%s %s-%d: ISR registration failed", | |
2596 | VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | |
2597 | return -ENODEV; | |
2598 | } | |
2599 | vxge_debug_init(VXGE_TRACE, | |
2600 | "new %s-%d line allocated", | |
2601 | "IRQ", vdev->pdev->irq); | |
2602 | } | |
2603 | ||
2604 | return VXGE_HW_OK; | |
2605 | } | |
2606 | ||
2607 | static void vxge_poll_vp_reset(unsigned long data) | |
2608 | { | |
2609 | struct vxgedev *vdev = (struct vxgedev *)data; | |
2610 | int i, j = 0; | |
2611 | ||
2612 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2613 | if (test_bit(i, &vdev->vp_reset)) { | |
2614 | vxge_reset_vpath(vdev, i); | |
2615 | j++; | |
2616 | } | |
2617 | } | |
2618 | if (j && (vdev->config.intr_type != MSI_X)) { | |
2619 | vxge_hw_device_unmask_all(vdev->devh); | |
2620 | vxge_hw_device_flush_io(vdev->devh); | |
2621 | } | |
2622 | ||
2623 | mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | |
2624 | } | |
2625 | ||
2626 | static void vxge_poll_vp_lockup(unsigned long data) | |
2627 | { | |
2628 | struct vxgedev *vdev = (struct vxgedev *)data; | |
703da5a1 | 2629 | enum vxge_hw_status status = VXGE_HW_OK; |
7adf7d1b JM |
2630 | struct vxge_vpath *vpath; |
2631 | struct vxge_ring *ring; | |
2632 | int i; | |
62ea0557 | 2633 | unsigned long rx_frms; |
703da5a1 RV |
2634 | |
2635 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2636 | ring = &vdev->vpaths[i].ring; | |
62ea0557 | 2637 | |
2638 | /* Truncated to machine word size number of frames */ | |
2639 | rx_frms = ACCESS_ONCE(ring->stats.rx_frms); | |
2640 | ||
703da5a1 | 2641 | /* Did this vpath received any packets */ |
62ea0557 | 2642 | if (ring->stats.prev_rx_frms == rx_frms) { |
703da5a1 RV |
2643 | status = vxge_hw_vpath_check_leak(ring->handle); |
2644 | ||
2645 | /* Did it received any packets last time */ | |
2646 | if ((VXGE_HW_FAIL == status) && | |
2647 | (VXGE_HW_FAIL == ring->last_status)) { | |
2648 | ||
2649 | /* schedule vpath reset */ | |
2650 | if (!test_and_set_bit(i, &vdev->vp_reset)) { | |
7adf7d1b | 2651 | vpath = &vdev->vpaths[i]; |
703da5a1 RV |
2652 | |
2653 | /* disable interrupts for this vpath */ | |
2654 | vxge_vpath_intr_disable(vdev, i); | |
2655 | ||
2656 | /* stop the queue for this vpath */ | |
98f45da2 | 2657 | netif_tx_stop_queue(vpath->fifo.txq); |
703da5a1 RV |
2658 | continue; |
2659 | } | |
2660 | } | |
2661 | } | |
62ea0557 | 2662 | ring->stats.prev_rx_frms = rx_frms; |
703da5a1 RV |
2663 | ring->last_status = status; |
2664 | } | |
2665 | ||
2666 | /* Check every 1 milli second */ | |
2667 | mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | |
2668 | } | |
2669 | ||
c8f44aff MM |
2670 | static netdev_features_t vxge_fix_features(struct net_device *dev, |
2671 | netdev_features_t features) | |
feb990d4 | 2672 | { |
c8f44aff | 2673 | netdev_features_t changed = dev->features ^ features; |
feb990d4 MM |
2674 | |
2675 | /* Enabling RTH requires some of the logic in vxge_device_register and a | |
2676 | * vpath reset. Due to these restrictions, only allow modification | |
2677 | * while the interface is down. | |
2678 | */ | |
2679 | if ((changed & NETIF_F_RXHASH) && netif_running(dev)) | |
2680 | features ^= NETIF_F_RXHASH; | |
2681 | ||
2682 | return features; | |
2683 | } | |
2684 | ||
c8f44aff | 2685 | static int vxge_set_features(struct net_device *dev, netdev_features_t features) |
feb990d4 MM |
2686 | { |
2687 | struct vxgedev *vdev = netdev_priv(dev); | |
c8f44aff | 2688 | netdev_features_t changed = dev->features ^ features; |
feb990d4 MM |
2689 | |
2690 | if (!(changed & NETIF_F_RXHASH)) | |
2691 | return 0; | |
2692 | ||
2693 | /* !netif_running() ensured by vxge_fix_features() */ | |
2694 | ||
2695 | vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH); | |
2696 | if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) { | |
2697 | dev->features = features ^ NETIF_F_RXHASH; | |
2698 | vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH); | |
2699 | return -EIO; | |
2700 | } | |
2701 | ||
2702 | return 0; | |
2703 | } | |
2704 | ||
703da5a1 RV |
2705 | /** |
2706 | * vxge_open | |
2707 | * @dev: pointer to the device structure. | |
2708 | * | |
2709 | * This function is the open entry point of the driver. It mainly calls a | |
2710 | * function to allocate Rx buffers and inserts them into the buffer | |
2711 | * descriptors and then enables the Rx part of the NIC. | |
2712 | * Return value: '0' on success and an appropriate (-)ve integer as | |
2713 | * defined in errno.h file on failure. | |
2714 | */ | |
528f7272 | 2715 | static int vxge_open(struct net_device *dev) |
703da5a1 RV |
2716 | { |
2717 | enum vxge_hw_status status; | |
2718 | struct vxgedev *vdev; | |
2719 | struct __vxge_hw_device *hldev; | |
7adf7d1b | 2720 | struct vxge_vpath *vpath; |
703da5a1 RV |
2721 | int ret = 0; |
2722 | int i; | |
2723 | u64 val64, function_mode; | |
528f7272 | 2724 | |
703da5a1 RV |
2725 | vxge_debug_entryexit(VXGE_TRACE, |
2726 | "%s: %s:%d", dev->name, __func__, __LINE__); | |
2727 | ||
5f54cebb | 2728 | vdev = netdev_priv(dev); |
d8ee7071 | 2729 | hldev = pci_get_drvdata(vdev->pdev); |
703da5a1 RV |
2730 | function_mode = vdev->config.device_hw_info.function_mode; |
2731 | ||
2732 | /* make sure you have link off by default every time Nic is | |
2733 | * initialized */ | |
2734 | netif_carrier_off(dev); | |
2735 | ||
703da5a1 RV |
2736 | /* Open VPATHs */ |
2737 | status = vxge_open_vpaths(vdev); | |
2738 | if (status != VXGE_HW_OK) { | |
2739 | vxge_debug_init(VXGE_ERR, | |
2740 | "%s: fatal: Vpath open failed", vdev->ndev->name); | |
2741 | ret = -EPERM; | |
2742 | goto out0; | |
2743 | } | |
2744 | ||
2745 | vdev->mtu = dev->mtu; | |
2746 | ||
2747 | status = vxge_add_isr(vdev); | |
2748 | if (status != VXGE_HW_OK) { | |
2749 | vxge_debug_init(VXGE_ERR, | |
2750 | "%s: fatal: ISR add failed", dev->name); | |
2751 | ret = -EPERM; | |
2752 | goto out1; | |
2753 | } | |
2754 | ||
703da5a1 RV |
2755 | if (vdev->config.intr_type != MSI_X) { |
2756 | netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | |
2757 | vdev->config.napi_weight); | |
2758 | napi_enable(&vdev->napi); | |
7adf7d1b JM |
2759 | for (i = 0; i < vdev->no_of_vpath; i++) { |
2760 | vpath = &vdev->vpaths[i]; | |
2761 | vpath->ring.napi_p = &vdev->napi; | |
2762 | } | |
703da5a1 RV |
2763 | } else { |
2764 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
2765 | vpath = &vdev->vpaths[i]; |
2766 | netif_napi_add(dev, &vpath->ring.napi, | |
703da5a1 | 2767 | vxge_poll_msix, vdev->config.napi_weight); |
7adf7d1b JM |
2768 | napi_enable(&vpath->ring.napi); |
2769 | vpath->ring.napi_p = &vpath->ring.napi; | |
703da5a1 RV |
2770 | } |
2771 | } | |
2772 | ||
2773 | /* configure RTH */ | |
2774 | if (vdev->config.rth_steering) { | |
2775 | status = vxge_rth_configure(vdev); | |
2776 | if (status != VXGE_HW_OK) { | |
2777 | vxge_debug_init(VXGE_ERR, | |
2778 | "%s: fatal: RTH configuration failed", | |
2779 | dev->name); | |
2780 | ret = -EPERM; | |
2781 | goto out2; | |
2782 | } | |
2783 | } | |
47f01db4 JM |
2784 | printk(KERN_INFO "%s: Receive Hashing Offload %s\n", dev->name, |
2785 | hldev->config.rth_en ? "enabled" : "disabled"); | |
703da5a1 RV |
2786 | |
2787 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
2788 | vpath = &vdev->vpaths[i]; |
2789 | ||
703da5a1 | 2790 | /* set initial mtu before enabling the device */ |
7adf7d1b | 2791 | status = vxge_hw_vpath_mtu_set(vpath->handle, vdev->mtu); |
703da5a1 RV |
2792 | if (status != VXGE_HW_OK) { |
2793 | vxge_debug_init(VXGE_ERR, | |
2794 | "%s: fatal: can not set new MTU", dev->name); | |
2795 | ret = -EPERM; | |
2796 | goto out2; | |
2797 | } | |
2798 | } | |
2799 | ||
2800 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | |
2801 | vxge_debug_init(vdev->level_trace, | |
2802 | "%s: MTU is %d", vdev->ndev->name, vdev->mtu); | |
2803 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | |
2804 | ||
7adf7d1b JM |
2805 | /* Restore the DA, VID table and also multicast and promiscuous mode |
2806 | * states | |
2807 | */ | |
2808 | if (vdev->all_multi_flg) { | |
2809 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2810 | vpath = &vdev->vpaths[i]; | |
2811 | vxge_restore_vpath_mac_addr(vpath); | |
2812 | vxge_restore_vpath_vid_table(vpath); | |
2813 | ||
2814 | status = vxge_hw_vpath_mcast_enable(vpath->handle); | |
2815 | if (status != VXGE_HW_OK) | |
2816 | vxge_debug_init(VXGE_ERR, | |
2817 | "%s:%d Enabling multicast failed", | |
2818 | __func__, __LINE__); | |
2819 | } | |
703da5a1 RV |
2820 | } |
2821 | ||
2822 | /* Enable vpath to sniff all unicast/multicast traffic that not | |
25985edc | 2823 | * addressed to them. We allow promiscuous mode for PF only |
703da5a1 RV |
2824 | */ |
2825 | ||
2826 | val64 = 0; | |
2827 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
2828 | val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | |
2829 | ||
2830 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2831 | vxge_hw_mgmt_reg_type_mrpcim, | |
2832 | 0, | |
2833 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2834 | rxmac_authorize_all_addr), | |
2835 | val64); | |
2836 | ||
2837 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2838 | vxge_hw_mgmt_reg_type_mrpcim, | |
2839 | 0, | |
2840 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2841 | rxmac_authorize_all_vid), | |
2842 | val64); | |
2843 | ||
2844 | vxge_set_multicast(dev); | |
2845 | ||
2846 | /* Enabling Bcast and mcast for all vpath */ | |
2847 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
2848 | vpath = &vdev->vpaths[i]; |
2849 | status = vxge_hw_vpath_bcast_enable(vpath->handle); | |
703da5a1 RV |
2850 | if (status != VXGE_HW_OK) |
2851 | vxge_debug_init(VXGE_ERR, | |
2852 | "%s : Can not enable bcast for vpath " | |
2853 | "id %d", dev->name, i); | |
2854 | if (vdev->config.addr_learn_en) { | |
7adf7d1b | 2855 | status = vxge_hw_vpath_mcast_enable(vpath->handle); |
703da5a1 RV |
2856 | if (status != VXGE_HW_OK) |
2857 | vxge_debug_init(VXGE_ERR, | |
2858 | "%s : Can not enable mcast for vpath " | |
2859 | "id %d", dev->name, i); | |
2860 | } | |
2861 | } | |
2862 | ||
2863 | vxge_hw_device_setpause_data(vdev->devh, 0, | |
2864 | vdev->config.tx_pause_enable, | |
2865 | vdev->config.rx_pause_enable); | |
2866 | ||
2867 | if (vdev->vp_reset_timer.function == NULL) | |
044a3813 JP |
2868 | vxge_os_timer(&vdev->vp_reset_timer, vxge_poll_vp_reset, vdev, |
2869 | HZ / 2); | |
703da5a1 | 2870 | |
e7935c96 JM |
2871 | /* There is no need to check for RxD leak and RxD lookup on Titan1A */ |
2872 | if (vdev->titan1 && vdev->vp_lockup_timer.function == NULL) | |
044a3813 | 2873 | vxge_os_timer(&vdev->vp_lockup_timer, vxge_poll_vp_lockup, vdev, |
e7935c96 | 2874 | HZ / 2); |
703da5a1 RV |
2875 | |
2876 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
2877 | ||
2878 | smp_wmb(); | |
2879 | ||
2880 | if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | |
2881 | netif_carrier_on(vdev->ndev); | |
75f5e1c6 | 2882 | netdev_notice(vdev->ndev, "Link Up\n"); |
703da5a1 RV |
2883 | vdev->stats.link_up++; |
2884 | } | |
2885 | ||
2886 | vxge_hw_device_intr_enable(vdev->devh); | |
2887 | ||
2888 | smp_wmb(); | |
2889 | ||
2890 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
7adf7d1b JM |
2891 | vpath = &vdev->vpaths[i]; |
2892 | ||
2893 | vxge_hw_vpath_enable(vpath->handle); | |
703da5a1 | 2894 | smp_wmb(); |
7adf7d1b | 2895 | vxge_hw_vpath_rx_doorbell_init(vpath->handle); |
703da5a1 RV |
2896 | } |
2897 | ||
d03848e0 | 2898 | netif_tx_start_all_queues(vdev->ndev); |
16fded7d JM |
2899 | |
2900 | /* configure CI */ | |
2901 | vxge_config_ci_for_tti_rti(vdev); | |
2902 | ||
703da5a1 RV |
2903 | goto out0; |
2904 | ||
2905 | out2: | |
2906 | vxge_rem_isr(vdev); | |
2907 | ||
2908 | /* Disable napi */ | |
2909 | if (vdev->config.intr_type != MSI_X) | |
2910 | napi_disable(&vdev->napi); | |
2911 | else { | |
2912 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2913 | napi_disable(&vdev->vpaths[i].ring.napi); | |
2914 | } | |
2915 | ||
2916 | out1: | |
2917 | vxge_close_vpaths(vdev, 0); | |
2918 | out0: | |
2919 | vxge_debug_entryexit(VXGE_TRACE, | |
2920 | "%s: %s:%d Exiting...", | |
2921 | dev->name, __func__, __LINE__); | |
2922 | return ret; | |
2923 | } | |
2924 | ||
25985edc | 2925 | /* Loop through the mac address list and delete all the entries */ |
42821a5b | 2926 | static void vxge_free_mac_add_list(struct vxge_vpath *vpath) |
703da5a1 RV |
2927 | { |
2928 | ||
2929 | struct list_head *entry, *next; | |
2930 | if (list_empty(&vpath->mac_addr_list)) | |
2931 | return; | |
2932 | ||
2933 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
2934 | list_del(entry); | |
2935 | kfree((struct vxge_mac_addrs *)entry); | |
2936 | } | |
2937 | } | |
2938 | ||
2939 | static void vxge_napi_del_all(struct vxgedev *vdev) | |
2940 | { | |
2941 | int i; | |
2942 | if (vdev->config.intr_type != MSI_X) | |
2943 | netif_napi_del(&vdev->napi); | |
2944 | else { | |
2945 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2946 | netif_napi_del(&vdev->vpaths[i].ring.napi); | |
2947 | } | |
703da5a1 RV |
2948 | } |
2949 | ||
42821a5b | 2950 | static int do_vxge_close(struct net_device *dev, int do_io) |
703da5a1 RV |
2951 | { |
2952 | enum vxge_hw_status status; | |
2953 | struct vxgedev *vdev; | |
2954 | struct __vxge_hw_device *hldev; | |
2955 | int i; | |
2956 | u64 val64, vpath_vector; | |
2957 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
2958 | dev->name, __func__, __LINE__); | |
2959 | ||
5f54cebb | 2960 | vdev = netdev_priv(dev); |
d8ee7071 | 2961 | hldev = pci_get_drvdata(vdev->pdev); |
703da5a1 | 2962 | |
bd9ee680 SH |
2963 | if (unlikely(!is_vxge_card_up(vdev))) |
2964 | return 0; | |
2965 | ||
703da5a1 RV |
2966 | /* If vxge_handle_crit_err task is executing, |
2967 | * wait till it completes. */ | |
2968 | while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
2969 | msleep(50); | |
2970 | ||
703da5a1 RV |
2971 | if (do_io) { |
2972 | /* Put the vpath back in normal mode */ | |
2973 | vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | |
2974 | status = vxge_hw_mgmt_reg_read(vdev->devh, | |
2975 | vxge_hw_mgmt_reg_type_mrpcim, | |
2976 | 0, | |
2977 | (ulong)offsetof( | |
2978 | struct vxge_hw_mrpcim_reg, | |
2979 | rts_mgr_cbasin_cfg), | |
2980 | &val64); | |
703da5a1 RV |
2981 | if (status == VXGE_HW_OK) { |
2982 | val64 &= ~vpath_vector; | |
2983 | status = vxge_hw_mgmt_reg_write(vdev->devh, | |
2984 | vxge_hw_mgmt_reg_type_mrpcim, | |
2985 | 0, | |
2986 | (ulong)offsetof( | |
2987 | struct vxge_hw_mrpcim_reg, | |
2988 | rts_mgr_cbasin_cfg), | |
2989 | val64); | |
2990 | } | |
2991 | ||
25985edc | 2992 | /* Remove the function 0 from promiscuous mode */ |
703da5a1 RV |
2993 | vxge_hw_mgmt_reg_write(vdev->devh, |
2994 | vxge_hw_mgmt_reg_type_mrpcim, | |
2995 | 0, | |
2996 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2997 | rxmac_authorize_all_addr), | |
2998 | 0); | |
2999 | ||
3000 | vxge_hw_mgmt_reg_write(vdev->devh, | |
3001 | vxge_hw_mgmt_reg_type_mrpcim, | |
3002 | 0, | |
3003 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
3004 | rxmac_authorize_all_vid), | |
3005 | 0); | |
3006 | ||
3007 | smp_wmb(); | |
3008 | } | |
e7935c96 JM |
3009 | |
3010 | if (vdev->titan1) | |
3011 | del_timer_sync(&vdev->vp_lockup_timer); | |
703da5a1 RV |
3012 | |
3013 | del_timer_sync(&vdev->vp_reset_timer); | |
3014 | ||
4d2a5b40 JM |
3015 | if (do_io) |
3016 | vxge_hw_device_wait_receive_idle(hldev); | |
3017 | ||
3018 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3019 | ||
703da5a1 RV |
3020 | /* Disable napi */ |
3021 | if (vdev->config.intr_type != MSI_X) | |
3022 | napi_disable(&vdev->napi); | |
3023 | else { | |
3024 | for (i = 0; i < vdev->no_of_vpath; i++) | |
3025 | napi_disable(&vdev->vpaths[i].ring.napi); | |
3026 | } | |
3027 | ||
3028 | netif_carrier_off(vdev->ndev); | |
75f5e1c6 | 3029 | netdev_notice(vdev->ndev, "Link Down\n"); |
d03848e0 | 3030 | netif_tx_stop_all_queues(vdev->ndev); |
703da5a1 RV |
3031 | |
3032 | /* Note that at this point xmit() is stopped by upper layer */ | |
3033 | if (do_io) | |
3034 | vxge_hw_device_intr_disable(vdev->devh); | |
3035 | ||
703da5a1 RV |
3036 | vxge_rem_isr(vdev); |
3037 | ||
3038 | vxge_napi_del_all(vdev); | |
3039 | ||
3040 | if (do_io) | |
3041 | vxge_reset_all_vpaths(vdev); | |
3042 | ||
3043 | vxge_close_vpaths(vdev, 0); | |
3044 | ||
3045 | vxge_debug_entryexit(VXGE_TRACE, | |
3046 | "%s: %s:%d Exiting...", dev->name, __func__, __LINE__); | |
3047 | ||
703da5a1 RV |
3048 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); |
3049 | ||
3050 | return 0; | |
3051 | } | |
3052 | ||
3053 | /** | |
3054 | * vxge_close | |
3055 | * @dev: device pointer. | |
3056 | * | |
3057 | * This is the stop entry point of the driver. It needs to undo exactly | |
3058 | * whatever was done by the open entry point, thus it's usually referred to | |
3059 | * as the close function.Among other things this function mainly stops the | |
3060 | * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | |
3061 | * Return value: '0' on success and an appropriate (-)ve integer as | |
3062 | * defined in errno.h file on failure. | |
3063 | */ | |
528f7272 | 3064 | static int vxge_close(struct net_device *dev) |
703da5a1 RV |
3065 | { |
3066 | do_vxge_close(dev, 1); | |
3067 | return 0; | |
3068 | } | |
3069 | ||
3070 | /** | |
3071 | * vxge_change_mtu | |
3072 | * @dev: net device pointer. | |
3073 | * @new_mtu :the new MTU size for the device. | |
3074 | * | |
3075 | * A driver entry point to change MTU size for the device. Before changing | |
3076 | * the MTU the device must be stopped. | |
3077 | */ | |
3078 | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | |
3079 | { | |
3080 | struct vxgedev *vdev = netdev_priv(dev); | |
3081 | ||
3082 | vxge_debug_entryexit(vdev->level_trace, | |
3083 | "%s:%d", __func__, __LINE__); | |
3084 | if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | |
3085 | vxge_debug_init(vdev->level_err, | |
3086 | "%s: mtu size is invalid", dev->name); | |
3087 | return -EPERM; | |
3088 | } | |
3089 | ||
3090 | /* check if device is down already */ | |
3091 | if (unlikely(!is_vxge_card_up(vdev))) { | |
3092 | /* just store new value, will use later on open() */ | |
3093 | dev->mtu = new_mtu; | |
3094 | vxge_debug_init(vdev->level_err, | |
3095 | "%s", "device is down on MTU change"); | |
3096 | return 0; | |
3097 | } | |
3098 | ||
3099 | vxge_debug_init(vdev->level_trace, | |
3100 | "trying to apply new MTU %d", new_mtu); | |
3101 | ||
3102 | if (vxge_close(dev)) | |
3103 | return -EIO; | |
3104 | ||
3105 | dev->mtu = new_mtu; | |
3106 | vdev->mtu = new_mtu; | |
3107 | ||
3108 | if (vxge_open(dev)) | |
3109 | return -EIO; | |
3110 | ||
3111 | vxge_debug_init(vdev->level_trace, | |
3112 | "%s: MTU changed to %d", vdev->ndev->name, new_mtu); | |
3113 | ||
3114 | vxge_debug_entryexit(vdev->level_trace, | |
3115 | "%s:%d Exiting...", __func__, __LINE__); | |
3116 | ||
3117 | return 0; | |
3118 | } | |
3119 | ||
3120 | /** | |
dd57f970 | 3121 | * vxge_get_stats64 |
703da5a1 | 3122 | * @dev: pointer to the device structure |
dd57f970 | 3123 | * @stats: pointer to struct rtnl_link_stats64 |
703da5a1 | 3124 | * |
703da5a1 | 3125 | */ |
dd57f970 ED |
3126 | static struct rtnl_link_stats64 * |
3127 | vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats) | |
703da5a1 | 3128 | { |
dd57f970 | 3129 | struct vxgedev *vdev = netdev_priv(dev); |
703da5a1 RV |
3130 | int k; |
3131 | ||
dd57f970 | 3132 | /* net_stats already zeroed by caller */ |
703da5a1 | 3133 | for (k = 0; k < vdev->no_of_vpath; k++) { |
62ea0557 | 3134 | struct vxge_ring_stats *rxstats = &vdev->vpaths[k].ring.stats; |
3135 | struct vxge_fifo_stats *txstats = &vdev->vpaths[k].fifo.stats; | |
3136 | unsigned int start; | |
3137 | u64 packets, bytes, multicast; | |
3138 | ||
3139 | do { | |
57a7744e | 3140 | start = u64_stats_fetch_begin_irq(&rxstats->syncp); |
62ea0557 | 3141 | |
3142 | packets = rxstats->rx_frms; | |
3143 | multicast = rxstats->rx_mcast; | |
3144 | bytes = rxstats->rx_bytes; | |
57a7744e | 3145 | } while (u64_stats_fetch_retry_irq(&rxstats->syncp, start)); |
62ea0557 | 3146 | |
3147 | net_stats->rx_packets += packets; | |
3148 | net_stats->rx_bytes += bytes; | |
3149 | net_stats->multicast += multicast; | |
3150 | ||
3151 | net_stats->rx_errors += rxstats->rx_errors; | |
3152 | net_stats->rx_dropped += rxstats->rx_dropped; | |
3153 | ||
3154 | do { | |
57a7744e | 3155 | start = u64_stats_fetch_begin_irq(&txstats->syncp); |
62ea0557 | 3156 | |
3157 | packets = txstats->tx_frms; | |
3158 | bytes = txstats->tx_bytes; | |
57a7744e | 3159 | } while (u64_stats_fetch_retry_irq(&txstats->syncp, start)); |
62ea0557 | 3160 | |
3161 | net_stats->tx_packets += packets; | |
3162 | net_stats->tx_bytes += bytes; | |
3163 | net_stats->tx_errors += txstats->tx_errors; | |
703da5a1 RV |
3164 | } |
3165 | ||
3166 | return net_stats; | |
3167 | } | |
3168 | ||
cd883a79 | 3169 | static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh) |
b81b3733 JM |
3170 | { |
3171 | enum vxge_hw_status status; | |
3172 | u64 val64; | |
3173 | ||
3174 | /* Timestamp is passed to the driver via the FCS, therefore we | |
3175 | * must disable the FCS stripping by the adapter. Since this is | |
3176 | * required for the driver to load (due to a hardware bug), | |
3177 | * there is no need to do anything special here. | |
3178 | */ | |
cd883a79 JM |
3179 | val64 = VXGE_HW_XMAC_TIMESTAMP_EN | |
3180 | VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) | | |
3181 | VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0); | |
b81b3733 | 3182 | |
cd883a79 | 3183 | status = vxge_hw_mgmt_reg_write(devh, |
b81b3733 JM |
3184 | vxge_hw_mgmt_reg_type_mrpcim, |
3185 | 0, | |
3186 | offsetof(struct vxge_hw_mrpcim_reg, | |
3187 | xmac_timestamp), | |
3188 | val64); | |
cd883a79 JM |
3189 | vxge_hw_device_flush_io(devh); |
3190 | devh->config.hwts_en = VXGE_HW_HWTS_ENABLE; | |
b81b3733 JM |
3191 | return status; |
3192 | } | |
3193 | ||
450e55e9 | 3194 | static int vxge_hwtstamp_set(struct vxgedev *vdev, void __user *data) |
b81b3733 JM |
3195 | { |
3196 | struct hwtstamp_config config; | |
b81b3733 JM |
3197 | int i; |
3198 | ||
3199 | if (copy_from_user(&config, data, sizeof(config))) | |
3200 | return -EFAULT; | |
3201 | ||
3202 | /* reserved for future extensions */ | |
3203 | if (config.flags) | |
3204 | return -EINVAL; | |
3205 | ||
3206 | /* Transmit HW Timestamp not supported */ | |
3207 | switch (config.tx_type) { | |
3208 | case HWTSTAMP_TX_OFF: | |
3209 | break; | |
3210 | case HWTSTAMP_TX_ON: | |
3211 | default: | |
3212 | return -ERANGE; | |
3213 | } | |
3214 | ||
3215 | switch (config.rx_filter) { | |
3216 | case HWTSTAMP_FILTER_NONE: | |
b81b3733 JM |
3217 | vdev->rx_hwts = 0; |
3218 | config.rx_filter = HWTSTAMP_FILTER_NONE; | |
3219 | break; | |
3220 | ||
3221 | case HWTSTAMP_FILTER_ALL: | |
3222 | case HWTSTAMP_FILTER_SOME: | |
3223 | case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: | |
3224 | case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: | |
3225 | case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: | |
3226 | case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: | |
3227 | case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: | |
3228 | case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: | |
3229 | case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: | |
3230 | case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: | |
3231 | case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: | |
3232 | case HWTSTAMP_FILTER_PTP_V2_EVENT: | |
3233 | case HWTSTAMP_FILTER_PTP_V2_SYNC: | |
3234 | case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: | |
cd883a79 | 3235 | if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE) |
b81b3733 JM |
3236 | return -EFAULT; |
3237 | ||
3238 | vdev->rx_hwts = 1; | |
3239 | config.rx_filter = HWTSTAMP_FILTER_ALL; | |
3240 | break; | |
3241 | ||
3242 | default: | |
3243 | return -ERANGE; | |
3244 | } | |
3245 | ||
3246 | for (i = 0; i < vdev->no_of_vpath; i++) | |
3247 | vdev->vpaths[i].ring.rx_hwts = vdev->rx_hwts; | |
3248 | ||
3249 | if (copy_to_user(data, &config, sizeof(config))) | |
3250 | return -EFAULT; | |
3251 | ||
3252 | return 0; | |
3253 | } | |
3254 | ||
450e55e9 BH |
3255 | static int vxge_hwtstamp_get(struct vxgedev *vdev, void __user *data) |
3256 | { | |
3257 | struct hwtstamp_config config; | |
3258 | ||
3259 | config.flags = 0; | |
3260 | config.tx_type = HWTSTAMP_TX_OFF; | |
3261 | config.rx_filter = (vdev->rx_hwts ? | |
3262 | HWTSTAMP_FILTER_ALL : HWTSTAMP_FILTER_NONE); | |
3263 | ||
3264 | if (copy_to_user(data, &config, sizeof(config))) | |
3265 | return -EFAULT; | |
3266 | ||
3267 | return 0; | |
3268 | } | |
3269 | ||
703da5a1 RV |
3270 | /** |
3271 | * vxge_ioctl | |
3272 | * @dev: Device pointer. | |
3273 | * @ifr: An IOCTL specific structure, that can contain a pointer to | |
3274 | * a proprietary structure used to pass information to the driver. | |
3275 | * @cmd: This is used to distinguish between the different commands that | |
3276 | * can be passed to the IOCTL functions. | |
3277 | * | |
3278 | * Entry point for the Ioctl. | |
3279 | */ | |
3280 | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
3281 | { | |
b81b3733 | 3282 | struct vxgedev *vdev = netdev_priv(dev); |
b81b3733 JM |
3283 | |
3284 | switch (cmd) { | |
3285 | case SIOCSHWTSTAMP: | |
450e55e9 BH |
3286 | return vxge_hwtstamp_set(vdev, rq->ifr_data); |
3287 | case SIOCGHWTSTAMP: | |
3288 | return vxge_hwtstamp_get(vdev, rq->ifr_data); | |
b81b3733 JM |
3289 | default: |
3290 | return -EOPNOTSUPP; | |
3291 | } | |
703da5a1 RV |
3292 | } |
3293 | ||
3294 | /** | |
3295 | * vxge_tx_watchdog | |
3296 | * @dev: pointer to net device structure | |
3297 | * | |
3298 | * Watchdog for transmit side. | |
3299 | * This function is triggered if the Tx Queue is stopped | |
3300 | * for a pre-defined amount of time when the Interface is still up. | |
3301 | */ | |
2e41f644 | 3302 | static void vxge_tx_watchdog(struct net_device *dev) |
703da5a1 RV |
3303 | { |
3304 | struct vxgedev *vdev; | |
3305 | ||
3306 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
3307 | ||
5f54cebb | 3308 | vdev = netdev_priv(dev); |
703da5a1 RV |
3309 | |
3310 | vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | |
3311 | ||
2e41f644 | 3312 | schedule_work(&vdev->reset_task); |
703da5a1 RV |
3313 | vxge_debug_entryexit(VXGE_TRACE, |
3314 | "%s:%d Exiting...", __func__, __LINE__); | |
3315 | } | |
3316 | ||
703da5a1 RV |
3317 | /** |
3318 | * vxge_vlan_rx_add_vid | |
3319 | * @dev: net device pointer. | |
80d5c368 | 3320 | * @proto: vlan protocol |
703da5a1 RV |
3321 | * @vid: vid |
3322 | * | |
3323 | * Add the vlan id to the devices vlan id table | |
3324 | */ | |
8e586137 | 3325 | static int |
80d5c368 | 3326 | vxge_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) |
703da5a1 | 3327 | { |
53515734 | 3328 | struct vxgedev *vdev = netdev_priv(dev); |
703da5a1 RV |
3329 | struct vxge_vpath *vpath; |
3330 | int vp_id; | |
3331 | ||
703da5a1 RV |
3332 | /* Add these vlan to the vid table */ |
3333 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
3334 | vpath = &vdev->vpaths[vp_id]; | |
3335 | if (!vpath->is_open) | |
3336 | continue; | |
3337 | vxge_hw_vpath_vid_add(vpath->handle, vid); | |
3338 | } | |
53515734 | 3339 | set_bit(vid, vdev->active_vlans); |
8e586137 | 3340 | return 0; |
703da5a1 RV |
3341 | } |
3342 | ||
3343 | /** | |
80d5c368 | 3344 | * vxge_vlan_rx_kill_vid |
703da5a1 | 3345 | * @dev: net device pointer. |
80d5c368 | 3346 | * @proto: vlan protocol |
703da5a1 RV |
3347 | * @vid: vid |
3348 | * | |
3349 | * Remove the vlan id from the device's vlan id table | |
3350 | */ | |
8e586137 | 3351 | static int |
80d5c368 | 3352 | vxge_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) |
703da5a1 | 3353 | { |
53515734 | 3354 | struct vxgedev *vdev = netdev_priv(dev); |
703da5a1 RV |
3355 | struct vxge_vpath *vpath; |
3356 | int vp_id; | |
3357 | ||
3358 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
3359 | ||
703da5a1 RV |
3360 | /* Delete this vlan from the vid table */ |
3361 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
3362 | vpath = &vdev->vpaths[vp_id]; | |
3363 | if (!vpath->is_open) | |
3364 | continue; | |
3365 | vxge_hw_vpath_vid_delete(vpath->handle, vid); | |
3366 | } | |
3367 | vxge_debug_entryexit(VXGE_TRACE, | |
3368 | "%s:%d Exiting...", __func__, __LINE__); | |
53515734 | 3369 | clear_bit(vid, vdev->active_vlans); |
8e586137 | 3370 | return 0; |
703da5a1 RV |
3371 | } |
3372 | ||
3373 | static const struct net_device_ops vxge_netdev_ops = { | |
3374 | .ndo_open = vxge_open, | |
3375 | .ndo_stop = vxge_close, | |
dd57f970 | 3376 | .ndo_get_stats64 = vxge_get_stats64, |
703da5a1 RV |
3377 | .ndo_start_xmit = vxge_xmit, |
3378 | .ndo_validate_addr = eth_validate_addr, | |
afc4b13d | 3379 | .ndo_set_rx_mode = vxge_set_multicast, |
703da5a1 | 3380 | .ndo_do_ioctl = vxge_ioctl, |
703da5a1 RV |
3381 | .ndo_set_mac_address = vxge_set_mac_addr, |
3382 | .ndo_change_mtu = vxge_change_mtu, | |
feb990d4 MM |
3383 | .ndo_fix_features = vxge_fix_features, |
3384 | .ndo_set_features = vxge_set_features, | |
703da5a1 RV |
3385 | .ndo_vlan_rx_kill_vid = vxge_vlan_rx_kill_vid, |
3386 | .ndo_vlan_rx_add_vid = vxge_vlan_rx_add_vid, | |
703da5a1 RV |
3387 | .ndo_tx_timeout = vxge_tx_watchdog, |
3388 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
3389 | .ndo_poll_controller = vxge_netpoll, | |
3390 | #endif | |
3391 | }; | |
3392 | ||
3a036ce5 | 3393 | static int vxge_device_register(struct __vxge_hw_device *hldev, |
1dd06ae8 GKH |
3394 | struct vxge_config *config, int high_dma, |
3395 | int no_of_vpath, struct vxgedev **vdev_out) | |
703da5a1 RV |
3396 | { |
3397 | struct net_device *ndev; | |
3398 | enum vxge_hw_status status = VXGE_HW_OK; | |
3399 | struct vxgedev *vdev; | |
98f45da2 | 3400 | int ret = 0, no_of_queue = 1; |
703da5a1 RV |
3401 | u64 stat; |
3402 | ||
3403 | *vdev_out = NULL; | |
d03848e0 | 3404 | if (config->tx_steering_type) |
703da5a1 RV |
3405 | no_of_queue = no_of_vpath; |
3406 | ||
3407 | ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | |
3408 | no_of_queue); | |
3409 | if (ndev == NULL) { | |
3410 | vxge_debug_init( | |
3411 | vxge_hw_device_trace_level_get(hldev), | |
3412 | "%s : device allocation failed", __func__); | |
3413 | ret = -ENODEV; | |
3414 | goto _out0; | |
3415 | } | |
3416 | ||
3417 | vxge_debug_entryexit( | |
3418 | vxge_hw_device_trace_level_get(hldev), | |
3419 | "%s: %s:%d Entering...", | |
3420 | ndev->name, __func__, __LINE__); | |
3421 | ||
3422 | vdev = netdev_priv(ndev); | |
3423 | memset(vdev, 0, sizeof(struct vxgedev)); | |
3424 | ||
3425 | vdev->ndev = ndev; | |
3426 | vdev->devh = hldev; | |
3427 | vdev->pdev = hldev->pdev; | |
3428 | memcpy(&vdev->config, config, sizeof(struct vxge_config)); | |
b81b3733 | 3429 | vdev->rx_hwts = 0; |
ff938e43 | 3430 | vdev->titan1 = (vdev->pdev->revision == VXGE_HW_TITAN1_PCI_REVISION); |
e7935c96 | 3431 | |
703da5a1 RV |
3432 | SET_NETDEV_DEV(ndev, &vdev->pdev->dev); |
3433 | ||
feb990d4 MM |
3434 | ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | |
3435 | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | |
3436 | NETIF_F_TSO | NETIF_F_TSO6 | | |
f646968f | 3437 | NETIF_F_HW_VLAN_CTAG_TX; |
feb990d4 MM |
3438 | if (vdev->config.rth_steering != NO_STEERING) |
3439 | ndev->hw_features |= NETIF_F_RXHASH; | |
3440 | ||
3441 | ndev->features |= ndev->hw_features | | |
f646968f | 3442 | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; |
feb990d4 | 3443 | |
703da5a1 RV |
3444 | |
3445 | ndev->netdev_ops = &vxge_netdev_ops; | |
3446 | ||
3447 | ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | |
2e41f644 | 3448 | INIT_WORK(&vdev->reset_task, vxge_reset); |
703da5a1 | 3449 | |
42821a5b | 3450 | vxge_initialize_ethtool_ops(ndev); |
703da5a1 RV |
3451 | |
3452 | /* Allocate memory for vpath */ | |
3453 | vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | |
3454 | no_of_vpath, GFP_KERNEL); | |
3455 | if (!vdev->vpaths) { | |
3456 | vxge_debug_init(VXGE_ERR, | |
3457 | "%s: vpath memory allocation failed", | |
3458 | vdev->ndev->name); | |
6cca2003 | 3459 | ret = -ENOMEM; |
703da5a1 RV |
3460 | goto _out1; |
3461 | } | |
3462 | ||
703da5a1 | 3463 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), |
278cee05 | 3464 | "%s : checksumming enabled", __func__); |
703da5a1 RV |
3465 | |
3466 | if (high_dma) { | |
3467 | ndev->features |= NETIF_F_HIGHDMA; | |
3468 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3469 | "%s : using High DMA", __func__); | |
3470 | } | |
3471 | ||
6cca2003 JM |
3472 | ret = register_netdev(ndev); |
3473 | if (ret) { | |
703da5a1 RV |
3474 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), |
3475 | "%s: %s : device registration failed!", | |
3476 | ndev->name, __func__); | |
703da5a1 RV |
3477 | goto _out2; |
3478 | } | |
3479 | ||
3480 | /* Set the factory defined MAC address initially */ | |
3481 | ndev->addr_len = ETH_ALEN; | |
3482 | ||
3483 | /* Make Link state as off at this point, when the Link change | |
3484 | * interrupt comes the state will be automatically changed to | |
3485 | * the right state. | |
3486 | */ | |
3487 | netif_carrier_off(ndev); | |
3488 | ||
3489 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3490 | "%s: Ethernet device registered", | |
3491 | ndev->name); | |
3492 | ||
e8ac1756 | 3493 | hldev->ndev = ndev; |
703da5a1 RV |
3494 | *vdev_out = vdev; |
3495 | ||
3496 | /* Resetting the Device stats */ | |
3497 | status = vxge_hw_mrpcim_stats_access( | |
3498 | hldev, | |
3499 | VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | |
3500 | 0, | |
3501 | 0, | |
3502 | &stat); | |
3503 | ||
3504 | if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | |
3505 | vxge_debug_init( | |
3506 | vxge_hw_device_trace_level_get(hldev), | |
3507 | "%s: device stats clear returns" | |
3508 | "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | |
3509 | ||
3510 | vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | |
3511 | "%s: %s:%d Exiting...", | |
3512 | ndev->name, __func__, __LINE__); | |
3513 | ||
3514 | return ret; | |
3515 | _out2: | |
3516 | kfree(vdev->vpaths); | |
3517 | _out1: | |
3518 | free_netdev(ndev); | |
3519 | _out0: | |
3520 | return ret; | |
3521 | } | |
3522 | ||
3523 | /* | |
3524 | * vxge_device_unregister | |
3525 | * | |
3526 | * This function will unregister and free network device | |
3527 | */ | |
2c91308f | 3528 | static void vxge_device_unregister(struct __vxge_hw_device *hldev) |
703da5a1 RV |
3529 | { |
3530 | struct vxgedev *vdev; | |
3531 | struct net_device *dev; | |
3532 | char buf[IFNAMSIZ]; | |
703da5a1 RV |
3533 | |
3534 | dev = hldev->ndev; | |
3535 | vdev = netdev_priv(dev); | |
703da5a1 | 3536 | |
2c91308f JM |
3537 | vxge_debug_entryexit(vdev->level_trace, "%s: %s:%d", vdev->ndev->name, |
3538 | __func__, __LINE__); | |
3539 | ||
13bb5180 | 3540 | strlcpy(buf, dev->name, IFNAMSIZ); |
703da5a1 | 3541 | |
43829731 | 3542 | flush_work(&vdev->reset_task); |
ba27d85c | 3543 | |
703da5a1 RV |
3544 | /* in 2.6 will call stop() if device is up */ |
3545 | unregister_netdev(dev); | |
3546 | ||
6cca2003 JM |
3547 | kfree(vdev->vpaths); |
3548 | ||
3549 | /* we are safe to free it now */ | |
3550 | free_netdev(dev); | |
3551 | ||
2c91308f JM |
3552 | vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered", |
3553 | buf); | |
3554 | vxge_debug_entryexit(vdev->level_trace, "%s: %s:%d Exiting...", buf, | |
3555 | __func__, __LINE__); | |
703da5a1 RV |
3556 | } |
3557 | ||
3558 | /* | |
3559 | * vxge_callback_crit_err | |
3560 | * | |
3561 | * This function is called by the alarm handler in interrupt context. | |
3562 | * Driver must analyze it based on the event type. | |
3563 | */ | |
3564 | static void | |
3565 | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | |
3566 | enum vxge_hw_event type, u64 vp_id) | |
3567 | { | |
3568 | struct net_device *dev = hldev->ndev; | |
5f54cebb | 3569 | struct vxgedev *vdev = netdev_priv(dev); |
98f45da2 | 3570 | struct vxge_vpath *vpath = NULL; |
703da5a1 RV |
3571 | int vpath_idx; |
3572 | ||
3573 | vxge_debug_entryexit(vdev->level_trace, | |
3574 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | |
3575 | ||
3576 | /* Note: This event type should be used for device wide | |
3577 | * indications only - Serious errors, Slot freeze and critical errors | |
3578 | */ | |
3579 | vdev->cric_err_event = type; | |
3580 | ||
98f45da2 JM |
3581 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { |
3582 | vpath = &vdev->vpaths[vpath_idx]; | |
3583 | if (vpath->device_id == vp_id) | |
703da5a1 | 3584 | break; |
98f45da2 | 3585 | } |
703da5a1 RV |
3586 | |
3587 | if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | |
3588 | if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | |
3589 | vxge_debug_init(VXGE_ERR, | |
3590 | "%s: Slot is frozen", vdev->ndev->name); | |
3591 | } else if (type == VXGE_HW_EVENT_SERR) { | |
3592 | vxge_debug_init(VXGE_ERR, | |
3593 | "%s: Encountered Serious Error", | |
3594 | vdev->ndev->name); | |
3595 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | |
3596 | vxge_debug_init(VXGE_ERR, | |
3597 | "%s: Encountered Critical Error", | |
3598 | vdev->ndev->name); | |
3599 | } | |
3600 | ||
3601 | if ((type == VXGE_HW_EVENT_SERR) || | |
3602 | (type == VXGE_HW_EVENT_SLOT_FREEZE)) { | |
3603 | if (unlikely(vdev->exec_mode)) | |
3604 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3605 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | |
3606 | vxge_hw_device_mask_all(hldev); | |
3607 | if (unlikely(vdev->exec_mode)) | |
3608 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3609 | } else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | |
3610 | (type == VXGE_HW_EVENT_VPATH_ERR)) { | |
3611 | ||
3612 | if (unlikely(vdev->exec_mode)) | |
3613 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3614 | else { | |
3615 | /* check if this vpath is already set for reset */ | |
3616 | if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | |
3617 | ||
3618 | /* disable interrupts for this vpath */ | |
3619 | vxge_vpath_intr_disable(vdev, vpath_idx); | |
3620 | ||
3621 | /* stop the queue for this vpath */ | |
98f45da2 | 3622 | netif_tx_stop_queue(vpath->fifo.txq); |
703da5a1 RV |
3623 | } |
3624 | } | |
3625 | } | |
3626 | ||
3627 | vxge_debug_entryexit(vdev->level_trace, | |
3628 | "%s: %s:%d Exiting...", | |
3629 | vdev->ndev->name, __func__, __LINE__); | |
3630 | } | |
3631 | ||
3632 | static void verify_bandwidth(void) | |
3633 | { | |
3634 | int i, band_width, total = 0, equal_priority = 0; | |
3635 | ||
3636 | /* 1. If user enters 0 for some fifo, give equal priority to all */ | |
3637 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3638 | if (bw_percentage[i] == 0) { | |
3639 | equal_priority = 1; | |
3640 | break; | |
3641 | } | |
3642 | } | |
3643 | ||
3644 | if (!equal_priority) { | |
3645 | /* 2. If sum exceeds 100, give equal priority to all */ | |
3646 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3647 | if (bw_percentage[i] == 0xFF) | |
3648 | break; | |
3649 | ||
3650 | total += bw_percentage[i]; | |
3651 | if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | |
3652 | equal_priority = 1; | |
3653 | break; | |
3654 | } | |
3655 | } | |
3656 | } | |
3657 | ||
3658 | if (!equal_priority) { | |
3659 | /* Is all the bandwidth consumed? */ | |
3660 | if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | |
3661 | if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | |
3662 | /* Split rest of bw equally among next VPs*/ | |
3663 | band_width = | |
3664 | (VXGE_HW_VPATH_BANDWIDTH_MAX - total) / | |
3665 | (VXGE_HW_MAX_VIRTUAL_PATHS - i); | |
3666 | if (band_width < 2) /* min of 2% */ | |
3667 | equal_priority = 1; | |
3668 | else { | |
3669 | for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | |
3670 | i++) | |
3671 | bw_percentage[i] = | |
3672 | band_width; | |
3673 | } | |
3674 | } | |
3675 | } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | |
3676 | equal_priority = 1; | |
3677 | } | |
3678 | ||
3679 | if (equal_priority) { | |
3680 | vxge_debug_init(VXGE_ERR, | |
3681 | "%s: Assigning equal bandwidth to all the vpaths", | |
3682 | VXGE_DRIVER_NAME); | |
3683 | bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | |
3684 | VXGE_HW_MAX_VIRTUAL_PATHS; | |
3685 | for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3686 | bw_percentage[i] = bw_percentage[0]; | |
3687 | } | |
703da5a1 RV |
3688 | } |
3689 | ||
3690 | /* | |
3691 | * Vpath configuration | |
3692 | */ | |
1dd06ae8 GKH |
3693 | static int vxge_config_vpaths(struct vxge_hw_device_config *device_config, |
3694 | u64 vpath_mask, struct vxge_config *config_param) | |
703da5a1 RV |
3695 | { |
3696 | int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | |
3697 | u32 txdl_size, txdl_per_memblock; | |
3698 | ||
3699 | temp = driver_config->vpath_per_dev; | |
3700 | if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | |
3701 | (max_config_dev == VXGE_MAX_CONFIG_DEV)) { | |
3702 | /* No more CPU. Return vpath number as zero.*/ | |
3703 | if (driver_config->g_no_cpus == -1) | |
3704 | return 0; | |
3705 | ||
3706 | if (!driver_config->g_no_cpus) | |
9cbb5760 YM |
3707 | driver_config->g_no_cpus = |
3708 | netif_get_num_default_rss_queues(); | |
703da5a1 RV |
3709 | |
3710 | driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | |
3711 | if (!driver_config->vpath_per_dev) | |
3712 | driver_config->vpath_per_dev = 1; | |
3713 | ||
3714 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3715 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
3716 | continue; | |
3717 | else | |
3718 | default_no_vpath++; | |
3719 | if (default_no_vpath < driver_config->vpath_per_dev) | |
3720 | driver_config->vpath_per_dev = default_no_vpath; | |
3721 | ||
3722 | driver_config->g_no_cpus = driver_config->g_no_cpus - | |
3723 | (driver_config->vpath_per_dev * 2); | |
3724 | if (driver_config->g_no_cpus <= 0) | |
3725 | driver_config->g_no_cpus = -1; | |
3726 | } | |
3727 | ||
3728 | if (driver_config->vpath_per_dev == 1) { | |
3729 | vxge_debug_ll_config(VXGE_TRACE, | |
3730 | "%s: Disable tx and rx steering, " | |
3731 | "as single vpath is configured", VXGE_DRIVER_NAME); | |
3732 | config_param->rth_steering = NO_STEERING; | |
3733 | config_param->tx_steering_type = NO_STEERING; | |
3734 | device_config->rth_en = 0; | |
3735 | } | |
3736 | ||
3737 | /* configure bandwidth */ | |
3738 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3739 | device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | |
3740 | ||
3741 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3742 | device_config->vp_config[i].vp_id = i; | |
3743 | device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | |
3744 | if (no_of_vpaths < driver_config->vpath_per_dev) { | |
3745 | if (!vxge_bVALn(vpath_mask, i, 1)) { | |
3746 | vxge_debug_ll_config(VXGE_TRACE, | |
3747 | "%s: vpath: %d is not available", | |
3748 | VXGE_DRIVER_NAME, i); | |
3749 | continue; | |
3750 | } else { | |
3751 | vxge_debug_ll_config(VXGE_TRACE, | |
3752 | "%s: vpath: %d available", | |
3753 | VXGE_DRIVER_NAME, i); | |
3754 | no_of_vpaths++; | |
3755 | } | |
3756 | } else { | |
3757 | vxge_debug_ll_config(VXGE_TRACE, | |
3758 | "%s: vpath: %d is not configured, " | |
3759 | "max_config_vpath exceeded", | |
3760 | VXGE_DRIVER_NAME, i); | |
3761 | break; | |
3762 | } | |
3763 | ||
3764 | /* Configure Tx fifo's */ | |
3765 | device_config->vp_config[i].fifo.enable = | |
3766 | VXGE_HW_FIFO_ENABLE; | |
3767 | device_config->vp_config[i].fifo.max_frags = | |
5beefb4f | 3768 | MAX_SKB_FRAGS + 1; |
703da5a1 RV |
3769 | device_config->vp_config[i].fifo.memblock_size = |
3770 | VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | |
3771 | ||
5beefb4f SH |
3772 | txdl_size = device_config->vp_config[i].fifo.max_frags * |
3773 | sizeof(struct vxge_hw_fifo_txd); | |
703da5a1 RV |
3774 | txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; |
3775 | ||
3776 | device_config->vp_config[i].fifo.fifo_blocks = | |
3777 | ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | |
3778 | ||
3779 | device_config->vp_config[i].fifo.intr = | |
3780 | VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | |
3781 | ||
3782 | /* Configure tti properties */ | |
3783 | device_config->vp_config[i].tti.intr_enable = | |
3784 | VXGE_HW_TIM_INTR_ENABLE; | |
3785 | ||
3786 | device_config->vp_config[i].tti.btimer_val = | |
3787 | (VXGE_TTI_BTIMER_VAL * 1000) / 272; | |
3788 | ||
3789 | device_config->vp_config[i].tti.timer_ac_en = | |
3790 | VXGE_HW_TIM_TIMER_AC_ENABLE; | |
3791 | ||
528f7272 JM |
3792 | /* For msi-x with napi (each vector has a handler of its own) - |
3793 | * Set CI to OFF for all vpaths | |
3794 | */ | |
703da5a1 RV |
3795 | device_config->vp_config[i].tti.timer_ci_en = |
3796 | VXGE_HW_TIM_TIMER_CI_DISABLE; | |
3797 | ||
3798 | device_config->vp_config[i].tti.timer_ri_en = | |
3799 | VXGE_HW_TIM_TIMER_RI_DISABLE; | |
3800 | ||
3801 | device_config->vp_config[i].tti.util_sel = | |
3802 | VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | |
3803 | ||
3804 | device_config->vp_config[i].tti.ltimer_val = | |
3805 | (VXGE_TTI_LTIMER_VAL * 1000) / 272; | |
3806 | ||
3807 | device_config->vp_config[i].tti.rtimer_val = | |
3808 | (VXGE_TTI_RTIMER_VAL * 1000) / 272; | |
3809 | ||
3810 | device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | |
3811 | device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | |
3812 | device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | |
3813 | device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | |
3814 | device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | |
3815 | device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | |
3816 | device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | |
3817 | ||
3818 | /* Configure Rx rings */ | |
3819 | device_config->vp_config[i].ring.enable = | |
3820 | VXGE_HW_RING_ENABLE; | |
3821 | ||
3822 | device_config->vp_config[i].ring.ring_blocks = | |
3823 | VXGE_HW_DEF_RING_BLOCKS; | |
528f7272 | 3824 | |
703da5a1 RV |
3825 | device_config->vp_config[i].ring.buffer_mode = |
3826 | VXGE_HW_RING_RXD_BUFFER_MODE_1; | |
528f7272 | 3827 | |
703da5a1 RV |
3828 | device_config->vp_config[i].ring.rxds_limit = |
3829 | VXGE_HW_DEF_RING_RXDS_LIMIT; | |
528f7272 | 3830 | |
703da5a1 RV |
3831 | device_config->vp_config[i].ring.scatter_mode = |
3832 | VXGE_HW_RING_SCATTER_MODE_A; | |
3833 | ||
3834 | /* Configure rti properties */ | |
3835 | device_config->vp_config[i].rti.intr_enable = | |
3836 | VXGE_HW_TIM_INTR_ENABLE; | |
3837 | ||
3838 | device_config->vp_config[i].rti.btimer_val = | |
3839 | (VXGE_RTI_BTIMER_VAL * 1000)/272; | |
3840 | ||
3841 | device_config->vp_config[i].rti.timer_ac_en = | |
3842 | VXGE_HW_TIM_TIMER_AC_ENABLE; | |
3843 | ||
3844 | device_config->vp_config[i].rti.timer_ci_en = | |
3845 | VXGE_HW_TIM_TIMER_CI_DISABLE; | |
3846 | ||
3847 | device_config->vp_config[i].rti.timer_ri_en = | |
3848 | VXGE_HW_TIM_TIMER_RI_DISABLE; | |
3849 | ||
3850 | device_config->vp_config[i].rti.util_sel = | |
3851 | VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | |
3852 | ||
3853 | device_config->vp_config[i].rti.urange_a = | |
3854 | RTI_RX_URANGE_A; | |
3855 | device_config->vp_config[i].rti.urange_b = | |
3856 | RTI_RX_URANGE_B; | |
3857 | device_config->vp_config[i].rti.urange_c = | |
3858 | RTI_RX_URANGE_C; | |
3859 | device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | |
3860 | device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | |
3861 | device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | |
3862 | device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | |
3863 | ||
3864 | device_config->vp_config[i].rti.rtimer_val = | |
3865 | (VXGE_RTI_RTIMER_VAL * 1000) / 272; | |
3866 | ||
3867 | device_config->vp_config[i].rti.ltimer_val = | |
3868 | (VXGE_RTI_LTIMER_VAL * 1000) / 272; | |
3869 | ||
3870 | device_config->vp_config[i].rpa_strip_vlan_tag = | |
3871 | vlan_tag_strip; | |
3872 | } | |
3873 | ||
3874 | driver_config->vpath_per_dev = temp; | |
3875 | return no_of_vpaths; | |
3876 | } | |
3877 | ||
3878 | /* initialize device configuratrions */ | |
1dd06ae8 GKH |
3879 | static void vxge_device_config_init(struct vxge_hw_device_config *device_config, |
3880 | int *intr_type) | |
703da5a1 RV |
3881 | { |
3882 | /* Used for CQRQ/SRQ. */ | |
3883 | device_config->dma_blockpool_initial = | |
3884 | VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | |
3885 | ||
3886 | device_config->dma_blockpool_max = | |
3887 | VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | |
3888 | ||
3889 | if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | |
3890 | max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | |
3891 | ||
3892 | #ifndef CONFIG_PCI_MSI | |
3893 | vxge_debug_init(VXGE_ERR, | |
3894 | "%s: This Kernel does not support " | |
3895 | "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | |
3896 | *intr_type = INTA; | |
3897 | #endif | |
3898 | ||
3899 | /* Configure whether MSI-X or IRQL. */ | |
3900 | switch (*intr_type) { | |
3901 | case INTA: | |
3902 | device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | |
3903 | break; | |
3904 | ||
3905 | case MSI_X: | |
16fded7d | 3906 | device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX_ONE_SHOT; |
703da5a1 RV |
3907 | break; |
3908 | } | |
528f7272 | 3909 | |
703da5a1 RV |
3910 | /* Timer period between device poll */ |
3911 | device_config->device_poll_millis = VXGE_TIMER_DELAY; | |
3912 | ||
3913 | /* Configure mac based steering. */ | |
3914 | device_config->rts_mac_en = addr_learn_en; | |
3915 | ||
3916 | /* Configure Vpaths */ | |
3917 | device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | |
3918 | ||
3919 | vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | |
3920 | __func__); | |
703da5a1 RV |
3921 | vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", |
3922 | device_config->intr_mode); | |
3923 | vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | |
3924 | device_config->device_poll_millis); | |
703da5a1 RV |
3925 | vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", |
3926 | device_config->rth_en); | |
3927 | vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | |
3928 | device_config->rth_it_type); | |
3929 | } | |
3930 | ||
3a036ce5 | 3931 | static void vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) |
703da5a1 RV |
3932 | { |
3933 | int i; | |
3934 | ||
3935 | vxge_debug_init(VXGE_TRACE, | |
3936 | "%s: %d Vpath(s) opened", | |
3937 | vdev->ndev->name, vdev->no_of_vpath); | |
3938 | ||
3939 | switch (vdev->config.intr_type) { | |
3940 | case INTA: | |
3941 | vxge_debug_init(VXGE_TRACE, | |
3942 | "%s: Interrupt type INTA", vdev->ndev->name); | |
3943 | break; | |
3944 | ||
3945 | case MSI_X: | |
3946 | vxge_debug_init(VXGE_TRACE, | |
3947 | "%s: Interrupt type MSI-X", vdev->ndev->name); | |
3948 | break; | |
3949 | } | |
3950 | ||
3951 | if (vdev->config.rth_steering) { | |
3952 | vxge_debug_init(VXGE_TRACE, | |
3953 | "%s: RTH steering enabled for TCP_IPV4", | |
3954 | vdev->ndev->name); | |
3955 | } else { | |
3956 | vxge_debug_init(VXGE_TRACE, | |
3957 | "%s: RTH steering disabled", vdev->ndev->name); | |
3958 | } | |
3959 | ||
3960 | switch (vdev->config.tx_steering_type) { | |
3961 | case NO_STEERING: | |
3962 | vxge_debug_init(VXGE_TRACE, | |
3963 | "%s: Tx steering disabled", vdev->ndev->name); | |
3964 | break; | |
3965 | case TX_PRIORITY_STEERING: | |
3966 | vxge_debug_init(VXGE_TRACE, | |
3967 | "%s: Unsupported tx steering option", | |
3968 | vdev->ndev->name); | |
3969 | vxge_debug_init(VXGE_TRACE, | |
3970 | "%s: Tx steering disabled", vdev->ndev->name); | |
3971 | vdev->config.tx_steering_type = 0; | |
3972 | break; | |
3973 | case TX_VLAN_STEERING: | |
3974 | vxge_debug_init(VXGE_TRACE, | |
3975 | "%s: Unsupported tx steering option", | |
3976 | vdev->ndev->name); | |
3977 | vxge_debug_init(VXGE_TRACE, | |
3978 | "%s: Tx steering disabled", vdev->ndev->name); | |
3979 | vdev->config.tx_steering_type = 0; | |
3980 | break; | |
3981 | case TX_MULTIQ_STEERING: | |
3982 | vxge_debug_init(VXGE_TRACE, | |
3983 | "%s: Tx multiqueue steering enabled", | |
3984 | vdev->ndev->name); | |
3985 | break; | |
3986 | case TX_PORT_STEERING: | |
3987 | vxge_debug_init(VXGE_TRACE, | |
3988 | "%s: Tx port steering enabled", | |
3989 | vdev->ndev->name); | |
3990 | break; | |
3991 | default: | |
3992 | vxge_debug_init(VXGE_ERR, | |
3993 | "%s: Unsupported tx steering type", | |
3994 | vdev->ndev->name); | |
3995 | vxge_debug_init(VXGE_TRACE, | |
3996 | "%s: Tx steering disabled", vdev->ndev->name); | |
3997 | vdev->config.tx_steering_type = 0; | |
3998 | } | |
3999 | ||
703da5a1 RV |
4000 | if (vdev->config.addr_learn_en) |
4001 | vxge_debug_init(VXGE_TRACE, | |
4002 | "%s: MAC Address learning enabled", vdev->ndev->name); | |
4003 | ||
703da5a1 RV |
4004 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { |
4005 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
4006 | continue; | |
4007 | vxge_debug_ll_config(VXGE_TRACE, | |
4008 | "%s: MTU size - %d", vdev->ndev->name, | |
64699336 | 4009 | ((vdev->devh))-> |
703da5a1 RV |
4010 | config.vp_config[i].mtu); |
4011 | vxge_debug_init(VXGE_TRACE, | |
4012 | "%s: VLAN tag stripping %s", vdev->ndev->name, | |
64699336 | 4013 | ((vdev->devh))-> |
703da5a1 RV |
4014 | config.vp_config[i].rpa_strip_vlan_tag |
4015 | ? "Enabled" : "Disabled"); | |
703da5a1 RV |
4016 | vxge_debug_ll_config(VXGE_TRACE, |
4017 | "%s: Max frags : %d", vdev->ndev->name, | |
64699336 | 4018 | ((vdev->devh))-> |
703da5a1 RV |
4019 | config.vp_config[i].fifo.max_frags); |
4020 | break; | |
4021 | } | |
4022 | } | |
4023 | ||
4024 | #ifdef CONFIG_PM | |
4025 | /** | |
4026 | * vxge_pm_suspend - vxge power management suspend entry point | |
4027 | * | |
4028 | */ | |
4029 | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | |
4030 | { | |
4031 | return -ENOSYS; | |
4032 | } | |
4033 | /** | |
4034 | * vxge_pm_resume - vxge power management resume entry point | |
4035 | * | |
4036 | */ | |
4037 | static int vxge_pm_resume(struct pci_dev *pdev) | |
4038 | { | |
4039 | return -ENOSYS; | |
4040 | } | |
4041 | ||
4042 | #endif | |
4043 | ||
4044 | /** | |
4045 | * vxge_io_error_detected - called when PCI error is detected | |
4046 | * @pdev: Pointer to PCI device | |
4047 | * @state: The current pci connection state | |
4048 | * | |
4049 | * This function is called after a PCI bus error affecting | |
4050 | * this device has been detected. | |
4051 | */ | |
4052 | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | |
4053 | pci_channel_state_t state) | |
4054 | { | |
d8ee7071 | 4055 | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); |
703da5a1 RV |
4056 | struct net_device *netdev = hldev->ndev; |
4057 | ||
4058 | netif_device_detach(netdev); | |
4059 | ||
e33b992d DN |
4060 | if (state == pci_channel_io_perm_failure) |
4061 | return PCI_ERS_RESULT_DISCONNECT; | |
4062 | ||
703da5a1 RV |
4063 | if (netif_running(netdev)) { |
4064 | /* Bring down the card, while avoiding PCI I/O */ | |
4065 | do_vxge_close(netdev, 0); | |
4066 | } | |
4067 | ||
4068 | pci_disable_device(pdev); | |
4069 | ||
4070 | return PCI_ERS_RESULT_NEED_RESET; | |
4071 | } | |
4072 | ||
4073 | /** | |
4074 | * vxge_io_slot_reset - called after the pci bus has been reset. | |
4075 | * @pdev: Pointer to PCI device | |
4076 | * | |
4077 | * Restart the card from scratch, as if from a cold-boot. | |
4078 | * At this point, the card has exprienced a hard reset, | |
4079 | * followed by fixups by BIOS, and has its config space | |
4080 | * set up identically to what it was at cold boot. | |
4081 | */ | |
4082 | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | |
4083 | { | |
d8ee7071 | 4084 | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); |
703da5a1 RV |
4085 | struct net_device *netdev = hldev->ndev; |
4086 | ||
4087 | struct vxgedev *vdev = netdev_priv(netdev); | |
4088 | ||
4089 | if (pci_enable_device(pdev)) { | |
75f5e1c6 | 4090 | netdev_err(netdev, "Cannot re-enable device after reset\n"); |
703da5a1 RV |
4091 | return PCI_ERS_RESULT_DISCONNECT; |
4092 | } | |
4093 | ||
4094 | pci_set_master(pdev); | |
528f7272 | 4095 | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); |
703da5a1 RV |
4096 | |
4097 | return PCI_ERS_RESULT_RECOVERED; | |
4098 | } | |
4099 | ||
4100 | /** | |
4101 | * vxge_io_resume - called when traffic can start flowing again. | |
4102 | * @pdev: Pointer to PCI device | |
4103 | * | |
4104 | * This callback is called when the error recovery driver tells | |
4105 | * us that its OK to resume normal operation. | |
4106 | */ | |
4107 | static void vxge_io_resume(struct pci_dev *pdev) | |
4108 | { | |
d8ee7071 | 4109 | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); |
703da5a1 RV |
4110 | struct net_device *netdev = hldev->ndev; |
4111 | ||
4112 | if (netif_running(netdev)) { | |
4113 | if (vxge_open(netdev)) { | |
75f5e1c6 JP |
4114 | netdev_err(netdev, |
4115 | "Can't bring device back up after reset\n"); | |
703da5a1 RV |
4116 | return; |
4117 | } | |
4118 | } | |
4119 | ||
4120 | netif_device_attach(netdev); | |
4121 | } | |
4122 | ||
cb27ec60 SH |
4123 | static inline u32 vxge_get_num_vfs(u64 function_mode) |
4124 | { | |
4125 | u32 num_functions = 0; | |
4126 | ||
4127 | switch (function_mode) { | |
4128 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | |
4129 | case VXGE_HW_FUNCTION_MODE_SRIOV_8: | |
4130 | num_functions = 8; | |
4131 | break; | |
4132 | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | |
4133 | num_functions = 1; | |
4134 | break; | |
4135 | case VXGE_HW_FUNCTION_MODE_SRIOV: | |
4136 | case VXGE_HW_FUNCTION_MODE_MRIOV: | |
4137 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17: | |
4138 | num_functions = 17; | |
4139 | break; | |
4140 | case VXGE_HW_FUNCTION_MODE_SRIOV_4: | |
4141 | num_functions = 4; | |
4142 | break; | |
4143 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2: | |
4144 | num_functions = 2; | |
4145 | break; | |
4146 | case VXGE_HW_FUNCTION_MODE_MRIOV_8: | |
4147 | num_functions = 8; /* TODO */ | |
4148 | break; | |
4149 | } | |
4150 | return num_functions; | |
4151 | } | |
4152 | ||
e8ac1756 JM |
4153 | int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override) |
4154 | { | |
4155 | struct __vxge_hw_device *hldev = vdev->devh; | |
4156 | u32 maj, min, bld, cmaj, cmin, cbld; | |
4157 | enum vxge_hw_status status; | |
4158 | const struct firmware *fw; | |
4159 | int ret; | |
4160 | ||
4161 | ret = request_firmware(&fw, fw_name, &vdev->pdev->dev); | |
4162 | if (ret) { | |
4163 | vxge_debug_init(VXGE_ERR, "%s: Firmware file '%s' not found", | |
4164 | VXGE_DRIVER_NAME, fw_name); | |
4165 | goto out; | |
4166 | } | |
4167 | ||
4168 | /* Load the new firmware onto the adapter */ | |
4169 | status = vxge_update_fw_image(hldev, fw->data, fw->size); | |
4170 | if (status != VXGE_HW_OK) { | |
4171 | vxge_debug_init(VXGE_ERR, | |
4172 | "%s: FW image download to adapter failed '%s'.", | |
4173 | VXGE_DRIVER_NAME, fw_name); | |
4174 | ret = -EIO; | |
4175 | goto out; | |
4176 | } | |
4177 | ||
4178 | /* Read the version of the new firmware */ | |
4179 | status = vxge_hw_upgrade_read_version(hldev, &maj, &min, &bld); | |
4180 | if (status != VXGE_HW_OK) { | |
4181 | vxge_debug_init(VXGE_ERR, | |
4182 | "%s: Upgrade read version failed '%s'.", | |
4183 | VXGE_DRIVER_NAME, fw_name); | |
4184 | ret = -EIO; | |
4185 | goto out; | |
4186 | } | |
4187 | ||
4188 | cmaj = vdev->config.device_hw_info.fw_version.major; | |
4189 | cmin = vdev->config.device_hw_info.fw_version.minor; | |
4190 | cbld = vdev->config.device_hw_info.fw_version.build; | |
4191 | /* It's possible the version in /lib/firmware is not the latest version. | |
4192 | * If so, we could get into a loop of trying to upgrade to the latest | |
4193 | * and flashing the older version. | |
4194 | */ | |
4195 | if (VXGE_FW_VER(maj, min, bld) == VXGE_FW_VER(cmaj, cmin, cbld) && | |
4196 | !override) { | |
4197 | ret = -EINVAL; | |
4198 | goto out; | |
4199 | } | |
4200 | ||
4201 | printk(KERN_NOTICE "Upgrade to firmware version %d.%d.%d commencing\n", | |
4202 | maj, min, bld); | |
4203 | ||
4204 | /* Flash the adapter with the new firmware */ | |
4205 | status = vxge_hw_flash_fw(hldev); | |
4206 | if (status != VXGE_HW_OK) { | |
4207 | vxge_debug_init(VXGE_ERR, "%s: Upgrade commit failed '%s'.", | |
4208 | VXGE_DRIVER_NAME, fw_name); | |
4209 | ret = -EIO; | |
4210 | goto out; | |
4211 | } | |
4212 | ||
4213 | printk(KERN_NOTICE "Upgrade of firmware successful! Adapter must be " | |
4214 | "hard reset before using, thus requiring a system reboot or a " | |
4215 | "hotplug event.\n"); | |
4216 | ||
4217 | out: | |
e84f885e | 4218 | release_firmware(fw); |
e8ac1756 JM |
4219 | return ret; |
4220 | } | |
4221 | ||
4222 | static int vxge_probe_fw_update(struct vxgedev *vdev) | |
4223 | { | |
4224 | u32 maj, min, bld; | |
4225 | int ret, gpxe = 0; | |
4226 | char *fw_name; | |
4227 | ||
4228 | maj = vdev->config.device_hw_info.fw_version.major; | |
4229 | min = vdev->config.device_hw_info.fw_version.minor; | |
4230 | bld = vdev->config.device_hw_info.fw_version.build; | |
4231 | ||
4232 | if (VXGE_FW_VER(maj, min, bld) == VXGE_CERT_FW_VER) | |
4233 | return 0; | |
4234 | ||
4235 | /* Ignore the build number when determining if the current firmware is | |
4236 | * "too new" to load the driver | |
4237 | */ | |
4238 | if (VXGE_FW_VER(maj, min, 0) > VXGE_CERT_FW_VER) { | |
4239 | vxge_debug_init(VXGE_ERR, "%s: Firmware newer than last known " | |
4240 | "version, unable to load driver\n", | |
4241 | VXGE_DRIVER_NAME); | |
4242 | return -EINVAL; | |
4243 | } | |
4244 | ||
4245 | /* Firmware 1.4.4 and older cannot be upgraded, and is too ancient to | |
4246 | * work with this driver. | |
4247 | */ | |
4248 | if (VXGE_FW_VER(maj, min, bld) <= VXGE_FW_DEAD_VER) { | |
4249 | vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d cannot be " | |
4250 | "upgraded\n", VXGE_DRIVER_NAME, maj, min, bld); | |
4251 | return -EINVAL; | |
4252 | } | |
4253 | ||
4254 | /* If file not specified, determine gPXE or not */ | |
4255 | if (VXGE_FW_VER(maj, min, bld) >= VXGE_EPROM_FW_VER) { | |
4256 | int i; | |
4257 | for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) | |
4258 | if (vdev->devh->eprom_versions[i]) { | |
4259 | gpxe = 1; | |
4260 | break; | |
4261 | } | |
4262 | } | |
4263 | if (gpxe) | |
4264 | fw_name = "vxge/X3fw-pxe.ncf"; | |
4265 | else | |
4266 | fw_name = "vxge/X3fw.ncf"; | |
4267 | ||
4268 | ret = vxge_fw_upgrade(vdev, fw_name, 0); | |
4269 | /* -EINVAL and -ENOENT are not fatal errors for flashing firmware on | |
4270 | * probe, so ignore them | |
4271 | */ | |
4272 | if (ret != -EINVAL && ret != -ENOENT) | |
4273 | return -EIO; | |
4274 | else | |
4275 | ret = 0; | |
4276 | ||
4277 | if (VXGE_FW_VER(VXGE_CERT_FW_VER_MAJOR, VXGE_CERT_FW_VER_MINOR, 0) > | |
4278 | VXGE_FW_VER(maj, min, 0)) { | |
4279 | vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d is too old to" | |
c0589fa7 | 4280 | " be used with this driver.", |
e8ac1756 JM |
4281 | VXGE_DRIVER_NAME, maj, min, bld); |
4282 | return -EINVAL; | |
4283 | } | |
4284 | ||
4285 | return ret; | |
4286 | } | |
4287 | ||
3a036ce5 | 4288 | static int is_sriov_initialized(struct pci_dev *pdev) |
c92bf70d JM |
4289 | { |
4290 | int pos; | |
4291 | u16 ctrl; | |
4292 | ||
4293 | pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); | |
4294 | if (pos) { | |
4295 | pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &ctrl); | |
4296 | if (ctrl & PCI_SRIOV_CTRL_VFE) | |
4297 | return 1; | |
4298 | } | |
4299 | return 0; | |
4300 | } | |
4301 | ||
956a2066 | 4302 | static const struct vxge_hw_uld_cbs vxge_callbacks = { |
4303 | .link_up = vxge_callback_link_up, | |
4304 | .link_down = vxge_callback_link_down, | |
4305 | .crit_err = vxge_callback_crit_err, | |
4306 | }; | |
4307 | ||
703da5a1 RV |
4308 | /** |
4309 | * vxge_probe | |
4310 | * @pdev : structure containing the PCI related information of the device. | |
4311 | * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | |
4312 | * Description: | |
4313 | * This function is called when a new PCI device gets detected and initializes | |
4314 | * it. | |
4315 | * Return value: | |
4316 | * returns 0 on success and negative on failure. | |
4317 | * | |
4318 | */ | |
3a036ce5 | 4319 | static int |
703da5a1 RV |
4320 | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) |
4321 | { | |
2c91308f | 4322 | struct __vxge_hw_device *hldev; |
703da5a1 RV |
4323 | enum vxge_hw_status status; |
4324 | int ret; | |
4325 | int high_dma = 0; | |
4326 | u64 vpath_mask = 0; | |
4327 | struct vxgedev *vdev; | |
7dad171c | 4328 | struct vxge_config *ll_config = NULL; |
703da5a1 RV |
4329 | struct vxge_hw_device_config *device_config = NULL; |
4330 | struct vxge_hw_device_attr attr; | |
4331 | int i, j, no_of_vpath = 0, max_vpath_supported = 0; | |
4332 | u8 *macaddr; | |
4333 | struct vxge_mac_addrs *entry; | |
4334 | static int bus = -1, device = -1; | |
cb27ec60 | 4335 | u32 host_type; |
703da5a1 | 4336 | u8 new_device = 0; |
cb27ec60 SH |
4337 | enum vxge_hw_status is_privileged; |
4338 | u32 function_mode; | |
4339 | u32 num_vfs = 0; | |
703da5a1 RV |
4340 | |
4341 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
4342 | attr.pdev = pdev; | |
4343 | ||
cb27ec60 | 4344 | /* In SRIOV-17 mode, functions of the same adapter |
528f7272 JM |
4345 | * can be deployed on different buses |
4346 | */ | |
4347 | if (((bus != pdev->bus->number) || (device != PCI_SLOT(pdev->devfn))) && | |
4348 | !pdev->is_virtfn) | |
703da5a1 RV |
4349 | new_device = 1; |
4350 | ||
4351 | bus = pdev->bus->number; | |
4352 | device = PCI_SLOT(pdev->devfn); | |
4353 | ||
4354 | if (new_device) { | |
4355 | if (driver_config->config_dev_cnt && | |
4356 | (driver_config->config_dev_cnt != | |
4357 | driver_config->total_dev_cnt)) | |
4358 | vxge_debug_init(VXGE_ERR, | |
4359 | "%s: Configured %d of %d devices", | |
4360 | VXGE_DRIVER_NAME, | |
4361 | driver_config->config_dev_cnt, | |
4362 | driver_config->total_dev_cnt); | |
4363 | driver_config->config_dev_cnt = 0; | |
4364 | driver_config->total_dev_cnt = 0; | |
703da5a1 | 4365 | } |
528f7272 | 4366 | |
9002397e SH |
4367 | /* Now making the CPU based no of vpath calculation |
4368 | * applicable for individual functions as well. | |
4369 | */ | |
4370 | driver_config->g_no_cpus = 0; | |
657205bd SH |
4371 | driver_config->vpath_per_dev = max_config_vpath; |
4372 | ||
703da5a1 RV |
4373 | driver_config->total_dev_cnt++; |
4374 | if (++driver_config->config_dev_cnt > max_config_dev) { | |
4375 | ret = 0; | |
4376 | goto _exit0; | |
4377 | } | |
4378 | ||
4379 | device_config = kzalloc(sizeof(struct vxge_hw_device_config), | |
4380 | GFP_KERNEL); | |
4381 | if (!device_config) { | |
4382 | ret = -ENOMEM; | |
4383 | vxge_debug_init(VXGE_ERR, | |
4384 | "device_config : malloc failed %s %d", | |
4385 | __FILE__, __LINE__); | |
4386 | goto _exit0; | |
4387 | } | |
4388 | ||
528f7272 | 4389 | ll_config = kzalloc(sizeof(struct vxge_config), GFP_KERNEL); |
7dad171c PB |
4390 | if (!ll_config) { |
4391 | ret = -ENOMEM; | |
4392 | vxge_debug_init(VXGE_ERR, | |
528f7272 | 4393 | "device_config : malloc failed %s %d", |
7dad171c PB |
4394 | __FILE__, __LINE__); |
4395 | goto _exit0; | |
4396 | } | |
4397 | ll_config->tx_steering_type = TX_MULTIQ_STEERING; | |
4398 | ll_config->intr_type = MSI_X; | |
4399 | ll_config->napi_weight = NEW_NAPI_WEIGHT; | |
4400 | ll_config->rth_steering = RTH_STEERING; | |
703da5a1 RV |
4401 | |
4402 | /* get the default configuration parameters */ | |
4403 | vxge_hw_device_config_default_get(device_config); | |
4404 | ||
4405 | /* initialize configuration parameters */ | |
7dad171c | 4406 | vxge_device_config_init(device_config, &ll_config->intr_type); |
703da5a1 RV |
4407 | |
4408 | ret = pci_enable_device(pdev); | |
4409 | if (ret) { | |
4410 | vxge_debug_init(VXGE_ERR, | |
4411 | "%s : can not enable PCI device", __func__); | |
4412 | goto _exit0; | |
4413 | } | |
4414 | ||
b3837cec | 4415 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
703da5a1 RV |
4416 | vxge_debug_ll_config(VXGE_TRACE, |
4417 | "%s : using 64bit DMA", __func__); | |
4418 | ||
4419 | high_dma = 1; | |
4420 | ||
4421 | if (pci_set_consistent_dma_mask(pdev, | |
b3837cec | 4422 | DMA_BIT_MASK(64))) { |
703da5a1 RV |
4423 | vxge_debug_init(VXGE_ERR, |
4424 | "%s : unable to obtain 64bit DMA for " | |
4425 | "consistent allocations", __func__); | |
4426 | ret = -ENOMEM; | |
4427 | goto _exit1; | |
4428 | } | |
b3837cec | 4429 | } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { |
703da5a1 RV |
4430 | vxge_debug_ll_config(VXGE_TRACE, |
4431 | "%s : using 32bit DMA", __func__); | |
4432 | } else { | |
4433 | ret = -ENOMEM; | |
4434 | goto _exit1; | |
4435 | } | |
4436 | ||
6cca2003 JM |
4437 | ret = pci_request_region(pdev, 0, VXGE_DRIVER_NAME); |
4438 | if (ret) { | |
703da5a1 RV |
4439 | vxge_debug_init(VXGE_ERR, |
4440 | "%s : request regions failed", __func__); | |
703da5a1 RV |
4441 | goto _exit1; |
4442 | } | |
4443 | ||
4444 | pci_set_master(pdev); | |
4445 | ||
4446 | attr.bar0 = pci_ioremap_bar(pdev, 0); | |
4447 | if (!attr.bar0) { | |
4448 | vxge_debug_init(VXGE_ERR, | |
4449 | "%s : cannot remap io memory bar0", __func__); | |
4450 | ret = -ENODEV; | |
4451 | goto _exit2; | |
4452 | } | |
4453 | vxge_debug_ll_config(VXGE_TRACE, | |
4454 | "pci ioremap bar0: %p:0x%llx", | |
4455 | attr.bar0, | |
4456 | (unsigned long long)pci_resource_start(pdev, 0)); | |
4457 | ||
703da5a1 | 4458 | status = vxge_hw_device_hw_info_get(attr.bar0, |
7dad171c | 4459 | &ll_config->device_hw_info); |
703da5a1 RV |
4460 | if (status != VXGE_HW_OK) { |
4461 | vxge_debug_init(VXGE_ERR, | |
4462 | "%s: Reading of hardware info failed." | |
4463 | "Please try upgrading the firmware.", VXGE_DRIVER_NAME); | |
4464 | ret = -EINVAL; | |
7975d1ee | 4465 | goto _exit3; |
703da5a1 RV |
4466 | } |
4467 | ||
7dad171c | 4468 | vpath_mask = ll_config->device_hw_info.vpath_mask; |
703da5a1 RV |
4469 | if (vpath_mask == 0) { |
4470 | vxge_debug_ll_config(VXGE_TRACE, | |
4471 | "%s: No vpaths available in device", VXGE_DRIVER_NAME); | |
4472 | ret = -EINVAL; | |
7975d1ee | 4473 | goto _exit3; |
703da5a1 RV |
4474 | } |
4475 | ||
4476 | vxge_debug_ll_config(VXGE_TRACE, | |
4477 | "%s:%d Vpath mask = %llx", __func__, __LINE__, | |
4478 | (unsigned long long)vpath_mask); | |
4479 | ||
7dad171c PB |
4480 | function_mode = ll_config->device_hw_info.function_mode; |
4481 | host_type = ll_config->device_hw_info.host_type; | |
cb27ec60 | 4482 | is_privileged = __vxge_hw_device_is_privilaged(host_type, |
7dad171c | 4483 | ll_config->device_hw_info.func_id); |
cb27ec60 | 4484 | |
703da5a1 RV |
4485 | /* Check how many vpaths are available */ |
4486 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
4487 | if (!((vpath_mask) & vxge_mBIT(i))) | |
4488 | continue; | |
4489 | max_vpath_supported++; | |
4490 | } | |
4491 | ||
cb27ec60 SH |
4492 | if (new_device) |
4493 | num_vfs = vxge_get_num_vfs(function_mode) - 1; | |
4494 | ||
5dbc9011 | 4495 | /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ |
c92bf70d JM |
4496 | if (is_sriov(function_mode) && !is_sriov_initialized(pdev) && |
4497 | (ll_config->intr_type != INTA)) { | |
4498 | ret = pci_enable_sriov(pdev, num_vfs); | |
cb27ec60 SH |
4499 | if (ret) |
4500 | vxge_debug_ll_config(VXGE_ERR, | |
4501 | "Failed in enabling SRIOV mode: %d\n", ret); | |
c92bf70d | 4502 | /* No need to fail out, as an error here is non-fatal */ |
5dbc9011 SS |
4503 | } |
4504 | ||
703da5a1 RV |
4505 | /* |
4506 | * Configure vpaths and get driver configured number of vpaths | |
4507 | * which is less than or equal to the maximum vpaths per function. | |
4508 | */ | |
7dad171c | 4509 | no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config); |
703da5a1 RV |
4510 | if (!no_of_vpath) { |
4511 | vxge_debug_ll_config(VXGE_ERR, | |
4512 | "%s: No more vpaths to configure", VXGE_DRIVER_NAME); | |
4513 | ret = 0; | |
7975d1ee | 4514 | goto _exit3; |
703da5a1 RV |
4515 | } |
4516 | ||
4517 | /* Setting driver callbacks */ | |
956a2066 | 4518 | attr.uld_callbacks = &vxge_callbacks; |
703da5a1 RV |
4519 | |
4520 | status = vxge_hw_device_initialize(&hldev, &attr, device_config); | |
4521 | if (status != VXGE_HW_OK) { | |
4522 | vxge_debug_init(VXGE_ERR, | |
4523 | "Failed to initialize device (%d)", status); | |
4524 | ret = -EINVAL; | |
7975d1ee | 4525 | goto _exit3; |
703da5a1 RV |
4526 | } |
4527 | ||
e8ac1756 JM |
4528 | if (VXGE_FW_VER(ll_config->device_hw_info.fw_version.major, |
4529 | ll_config->device_hw_info.fw_version.minor, | |
4530 | ll_config->device_hw_info.fw_version.build) >= | |
4531 | VXGE_EPROM_FW_VER) { | |
4532 | struct eprom_image img[VXGE_HW_MAX_ROM_IMAGES]; | |
4533 | ||
4534 | status = vxge_hw_vpath_eprom_img_ver_get(hldev, img); | |
4535 | if (status != VXGE_HW_OK) { | |
4536 | vxge_debug_init(VXGE_ERR, "%s: Reading of EPROM failed", | |
4537 | VXGE_DRIVER_NAME); | |
4538 | /* This is a non-fatal error, continue */ | |
4539 | } | |
4540 | ||
4541 | for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) { | |
4542 | hldev->eprom_versions[i] = img[i].version; | |
4543 | if (!img[i].is_valid) | |
4544 | break; | |
4545 | vxge_debug_init(VXGE_TRACE, "%s: EPROM %d, version " | |
1d15f81c | 4546 | "%d.%d.%d.%d", VXGE_DRIVER_NAME, i, |
e8ac1756 JM |
4547 | VXGE_EPROM_IMG_MAJOR(img[i].version), |
4548 | VXGE_EPROM_IMG_MINOR(img[i].version), | |
4549 | VXGE_EPROM_IMG_FIX(img[i].version), | |
4550 | VXGE_EPROM_IMG_BUILD(img[i].version)); | |
4551 | } | |
4552 | } | |
4553 | ||
fa41fd10 | 4554 | /* if FCS stripping is not disabled in MAC fail driver load */ |
b81b3733 JM |
4555 | status = vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask); |
4556 | if (status != VXGE_HW_OK) { | |
4557 | vxge_debug_init(VXGE_ERR, "%s: FCS stripping is enabled in MAC" | |
4558 | " failing driver load", VXGE_DRIVER_NAME); | |
fa41fd10 SH |
4559 | ret = -EINVAL; |
4560 | goto _exit4; | |
4561 | } | |
4562 | ||
cd883a79 JM |
4563 | /* Always enable HWTS. This will always cause the FCS to be invalid, |
4564 | * due to the fact that HWTS is using the FCS as the location of the | |
4565 | * timestamp. The HW FCS checking will still correctly determine if | |
4566 | * there is a valid checksum, and the FCS is being removed by the driver | |
4567 | * anyway. So no fucntionality is being lost. Since it is always | |
4568 | * enabled, we now simply use the ioctl call to set whether or not the | |
4569 | * driver should be paying attention to the HWTS. | |
4570 | */ | |
4571 | if (is_privileged == VXGE_HW_OK) { | |
4572 | status = vxge_timestamp_config(hldev); | |
4573 | if (status != VXGE_HW_OK) { | |
4574 | vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed", | |
4575 | VXGE_DRIVER_NAME); | |
4576 | ret = -EFAULT; | |
4577 | goto _exit4; | |
4578 | } | |
4579 | } | |
4580 | ||
703da5a1 RV |
4581 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); |
4582 | ||
4583 | /* set private device info */ | |
4584 | pci_set_drvdata(pdev, hldev); | |
4585 | ||
7dad171c PB |
4586 | ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; |
4587 | ll_config->addr_learn_en = addr_learn_en; | |
4588 | ll_config->rth_algorithm = RTH_ALG_JENKINS; | |
47f01db4 JM |
4589 | ll_config->rth_hash_type_tcpipv4 = 1; |
4590 | ll_config->rth_hash_type_ipv4 = 0; | |
4591 | ll_config->rth_hash_type_tcpipv6 = 0; | |
4592 | ll_config->rth_hash_type_ipv6 = 0; | |
4593 | ll_config->rth_hash_type_tcpipv6ex = 0; | |
4594 | ll_config->rth_hash_type_ipv6ex = 0; | |
7dad171c PB |
4595 | ll_config->rth_bkt_sz = RTH_BUCKET_SIZE; |
4596 | ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | |
4597 | ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | |
4598 | ||
e8ac1756 JM |
4599 | ret = vxge_device_register(hldev, ll_config, high_dma, no_of_vpath, |
4600 | &vdev); | |
4601 | if (ret) { | |
703da5a1 | 4602 | ret = -EINVAL; |
7975d1ee | 4603 | goto _exit4; |
703da5a1 RV |
4604 | } |
4605 | ||
e8ac1756 JM |
4606 | ret = vxge_probe_fw_update(vdev); |
4607 | if (ret) | |
4608 | goto _exit5; | |
4609 | ||
703da5a1 RV |
4610 | vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); |
4611 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | |
4612 | vxge_hw_device_trace_level_get(hldev)); | |
4613 | ||
4614 | /* set private HW device info */ | |
703da5a1 RV |
4615 | vdev->mtu = VXGE_HW_DEFAULT_MTU; |
4616 | vdev->bar0 = attr.bar0; | |
703da5a1 RV |
4617 | vdev->max_vpath_supported = max_vpath_supported; |
4618 | vdev->no_of_vpath = no_of_vpath; | |
4619 | ||
4620 | /* Virtual Path count */ | |
4621 | for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
4622 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
4623 | continue; | |
4624 | if (j >= vdev->no_of_vpath) | |
4625 | break; | |
4626 | ||
4627 | vdev->vpaths[j].is_configured = 1; | |
4628 | vdev->vpaths[j].device_id = i; | |
703da5a1 RV |
4629 | vdev->vpaths[j].ring.driver_id = j; |
4630 | vdev->vpaths[j].vdev = vdev; | |
4631 | vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | |
4632 | memcpy((u8 *)vdev->vpaths[j].macaddr, | |
7dad171c | 4633 | ll_config->device_hw_info.mac_addrs[i], |
703da5a1 RV |
4634 | ETH_ALEN); |
4635 | ||
4636 | /* Initialize the mac address list header */ | |
4637 | INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | |
4638 | ||
4639 | vdev->vpaths[j].mac_addr_cnt = 0; | |
4640 | vdev->vpaths[j].mcast_addr_cnt = 0; | |
4641 | j++; | |
4642 | } | |
4643 | vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | |
4644 | vdev->max_config_port = max_config_port; | |
4645 | ||
4646 | vdev->vlan_tag_strip = vlan_tag_strip; | |
4647 | ||
4648 | /* map the hashing selector table to the configured vpaths */ | |
4649 | for (i = 0; i < vdev->no_of_vpath; i++) | |
4650 | vdev->vpath_selector[i] = vpath_selector[i]; | |
4651 | ||
4652 | macaddr = (u8 *)vdev->vpaths[0].macaddr; | |
4653 | ||
7dad171c PB |
4654 | ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; |
4655 | ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | |
4656 | ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | |
703da5a1 RV |
4657 | |
4658 | vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | |
7dad171c | 4659 | vdev->ndev->name, ll_config->device_hw_info.serial_number); |
703da5a1 RV |
4660 | |
4661 | vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | |
7dad171c | 4662 | vdev->ndev->name, ll_config->device_hw_info.part_number); |
703da5a1 RV |
4663 | |
4664 | vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | |
7dad171c | 4665 | vdev->ndev->name, ll_config->device_hw_info.product_desc); |
703da5a1 | 4666 | |
bf54e736 | 4667 | vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM", |
4668 | vdev->ndev->name, macaddr); | |
703da5a1 RV |
4669 | |
4670 | vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | |
4671 | vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | |
4672 | ||
4673 | vxge_debug_init(VXGE_TRACE, | |
4674 | "%s: Firmware version : %s Date : %s", vdev->ndev->name, | |
7dad171c PB |
4675 | ll_config->device_hw_info.fw_version.version, |
4676 | ll_config->device_hw_info.fw_date.date); | |
703da5a1 | 4677 | |
0a25bdc6 | 4678 | if (new_device) { |
7dad171c | 4679 | switch (ll_config->device_hw_info.function_mode) { |
0a25bdc6 SH |
4680 | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: |
4681 | vxge_debug_init(VXGE_TRACE, | |
4682 | "%s: Single Function Mode Enabled", vdev->ndev->name); | |
4683 | break; | |
4684 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | |
4685 | vxge_debug_init(VXGE_TRACE, | |
4686 | "%s: Multi Function Mode Enabled", vdev->ndev->name); | |
4687 | break; | |
4688 | case VXGE_HW_FUNCTION_MODE_SRIOV: | |
4689 | vxge_debug_init(VXGE_TRACE, | |
4690 | "%s: Single Root IOV Mode Enabled", vdev->ndev->name); | |
4691 | break; | |
4692 | case VXGE_HW_FUNCTION_MODE_MRIOV: | |
4693 | vxge_debug_init(VXGE_TRACE, | |
4694 | "%s: Multi Root IOV Mode Enabled", vdev->ndev->name); | |
4695 | break; | |
4696 | } | |
4697 | } | |
4698 | ||
703da5a1 RV |
4699 | vxge_print_parm(vdev, vpath_mask); |
4700 | ||
4701 | /* Store the fw version for ethttool option */ | |
7dad171c | 4702 | strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version); |
703da5a1 | 4703 | memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); |
703da5a1 RV |
4704 | |
4705 | /* Copy the station mac address to the list */ | |
4706 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
e80be0b0 | 4707 | entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_KERNEL); |
703da5a1 RV |
4708 | if (NULL == entry) { |
4709 | vxge_debug_init(VXGE_ERR, | |
4710 | "%s: mac_addr_list : memory allocation failed", | |
4711 | vdev->ndev->name); | |
4712 | ret = -EPERM; | |
e8ac1756 | 4713 | goto _exit6; |
703da5a1 RV |
4714 | } |
4715 | macaddr = (u8 *)&entry->macaddr; | |
4716 | memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | |
4717 | list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | |
4718 | vdev->vpaths[i].mac_addr_cnt = 1; | |
4719 | } | |
4720 | ||
914d0d71 | 4721 | kfree(device_config); |
eb5f10c2 SH |
4722 | |
4723 | /* | |
4724 | * INTA is shared in multi-function mode. This is unlike the INTA | |
4725 | * implementation in MR mode, where each VH has its own INTA message. | |
4726 | * - INTA is masked (disabled) as long as at least one function sets | |
4727 | * its TITAN_MASK_ALL_INT.ALARM bit. | |
4728 | * - INTA is unmasked (enabled) when all enabled functions have cleared | |
4729 | * their own TITAN_MASK_ALL_INT.ALARM bit. | |
4730 | * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up. | |
4731 | * Though this driver leaves the top level interrupts unmasked while | |
4732 | * leaving the required module interrupt bits masked on exit, there | |
4733 | * could be a rougue driver around that does not follow this procedure | |
4734 | * resulting in a failure to generate interrupts. The following code is | |
4735 | * present to prevent such a failure. | |
4736 | */ | |
4737 | ||
7dad171c | 4738 | if (ll_config->device_hw_info.function_mode == |
eb5f10c2 SH |
4739 | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) |
4740 | if (vdev->config.intr_type == INTA) | |
4741 | vxge_hw_device_unmask_all(hldev); | |
4742 | ||
703da5a1 RV |
4743 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", |
4744 | vdev->ndev->name, __func__, __LINE__); | |
4745 | ||
4746 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | |
4747 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | |
4748 | vxge_hw_device_trace_level_get(hldev)); | |
4749 | ||
7dad171c | 4750 | kfree(ll_config); |
703da5a1 RV |
4751 | return 0; |
4752 | ||
e8ac1756 | 4753 | _exit6: |
703da5a1 RV |
4754 | for (i = 0; i < vdev->no_of_vpath; i++) |
4755 | vxge_free_mac_add_list(&vdev->vpaths[i]); | |
e8ac1756 | 4756 | _exit5: |
703da5a1 | 4757 | vxge_device_unregister(hldev); |
7975d1ee | 4758 | _exit4: |
703da5a1 | 4759 | vxge_hw_device_terminate(hldev); |
6cca2003 | 4760 | pci_disable_sriov(pdev); |
703da5a1 RV |
4761 | _exit3: |
4762 | iounmap(attr.bar0); | |
4763 | _exit2: | |
dc66daa9 | 4764 | pci_release_region(pdev, 0); |
703da5a1 RV |
4765 | _exit1: |
4766 | pci_disable_device(pdev); | |
4767 | _exit0: | |
7dad171c | 4768 | kfree(ll_config); |
703da5a1 RV |
4769 | kfree(device_config); |
4770 | driver_config->config_dev_cnt--; | |
6cca2003 | 4771 | driver_config->total_dev_cnt--; |
703da5a1 RV |
4772 | return ret; |
4773 | } | |
4774 | ||
4775 | /** | |
4776 | * vxge_rem_nic - Free the PCI device | |
4777 | * @pdev: structure containing the PCI related information of the device. | |
4778 | * Description: This function is called by the Pci subsystem to release a | |
4779 | * PCI device and free up all resource held up by the device. | |
4780 | */ | |
3a036ce5 | 4781 | static void vxge_remove(struct pci_dev *pdev) |
703da5a1 | 4782 | { |
2c91308f | 4783 | struct __vxge_hw_device *hldev; |
6cca2003 JM |
4784 | struct vxgedev *vdev; |
4785 | int i; | |
703da5a1 | 4786 | |
d8ee7071 | 4787 | hldev = pci_get_drvdata(pdev); |
703da5a1 RV |
4788 | if (hldev == NULL) |
4789 | return; | |
2c91308f | 4790 | |
6cca2003 | 4791 | vdev = netdev_priv(hldev->ndev); |
703da5a1 | 4792 | |
2c91308f | 4793 | vxge_debug_entryexit(vdev->level_trace, "%s:%d", __func__, __LINE__); |
2c91308f JM |
4794 | vxge_debug_init(vdev->level_trace, "%s : removing PCI device...", |
4795 | __func__); | |
703da5a1 | 4796 | |
6cca2003 | 4797 | for (i = 0; i < vdev->no_of_vpath; i++) |
703da5a1 | 4798 | vxge_free_mac_add_list(&vdev->vpaths[i]); |
703da5a1 | 4799 | |
6cca2003 | 4800 | vxge_device_unregister(hldev); |
6cca2003 JM |
4801 | /* Do not call pci_disable_sriov here, as it will break child devices */ |
4802 | vxge_hw_device_terminate(hldev); | |
703da5a1 | 4803 | iounmap(vdev->bar0); |
6cca2003 JM |
4804 | pci_release_region(pdev, 0); |
4805 | pci_disable_device(pdev); | |
4806 | driver_config->config_dev_cnt--; | |
4807 | driver_config->total_dev_cnt--; | |
703da5a1 | 4808 | |
2c91308f JM |
4809 | vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", |
4810 | __func__, __LINE__); | |
2c91308f JM |
4811 | vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, |
4812 | __LINE__); | |
703da5a1 RV |
4813 | } |
4814 | ||
3646f0e5 | 4815 | static const struct pci_error_handlers vxge_err_handler = { |
703da5a1 RV |
4816 | .error_detected = vxge_io_error_detected, |
4817 | .slot_reset = vxge_io_slot_reset, | |
4818 | .resume = vxge_io_resume, | |
4819 | }; | |
4820 | ||
4821 | static struct pci_driver vxge_driver = { | |
4822 | .name = VXGE_DRIVER_NAME, | |
4823 | .id_table = vxge_id_table, | |
4824 | .probe = vxge_probe, | |
3a036ce5 | 4825 | .remove = vxge_remove, |
703da5a1 RV |
4826 | #ifdef CONFIG_PM |
4827 | .suspend = vxge_pm_suspend, | |
4828 | .resume = vxge_pm_resume, | |
4829 | #endif | |
4830 | .err_handler = &vxge_err_handler, | |
4831 | }; | |
4832 | ||
4833 | static int __init | |
4834 | vxge_starter(void) | |
4835 | { | |
4836 | int ret = 0; | |
703da5a1 | 4837 | |
75f5e1c6 JP |
4838 | pr_info("Copyright(c) 2002-2010 Exar Corp.\n"); |
4839 | pr_info("Driver version: %s\n", DRV_VERSION); | |
703da5a1 RV |
4840 | |
4841 | verify_bandwidth(); | |
4842 | ||
4843 | driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | |
4844 | if (!driver_config) | |
4845 | return -ENOMEM; | |
4846 | ||
4847 | ret = pci_register_driver(&vxge_driver); | |
528f7272 JM |
4848 | if (ret) { |
4849 | kfree(driver_config); | |
4850 | goto err; | |
4851 | } | |
703da5a1 RV |
4852 | |
4853 | if (driver_config->config_dev_cnt && | |
4854 | (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | |
4855 | vxge_debug_init(VXGE_ERR, | |
4856 | "%s: Configured %d of %d devices", | |
4857 | VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | |
4858 | driver_config->total_dev_cnt); | |
528f7272 | 4859 | err: |
703da5a1 RV |
4860 | return ret; |
4861 | } | |
4862 | ||
4863 | static void __exit | |
4864 | vxge_closer(void) | |
4865 | { | |
4866 | pci_unregister_driver(&vxge_driver); | |
4867 | kfree(driver_config); | |
4868 | } | |
4869 | module_init(vxge_starter); | |
4870 | module_exit(vxge_closer); |