]>
Commit | Line | Data |
---|---|---|
ff9fc791 HS |
1 | /* |
2 | * Implement cfg80211 ("iw") support. | |
3 | * | |
4 | * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany | |
5 | * Holger Schurig <hs4233@mail.mn-solutions.de> | |
6 | * | |
7 | */ | |
8 | ||
241a6a54 AM |
9 | #include <linux/sched.h> |
10 | #include <linux/wait.h> | |
5a0e3ad6 | 11 | #include <linux/slab.h> |
1047d5ed | 12 | #include <linux/ieee80211.h> |
ff9fc791 | 13 | #include <net/cfg80211.h> |
e86dc1ca | 14 | #include <asm/unaligned.h> |
ff9fc791 | 15 | |
e86dc1ca | 16 | #include "decl.h" |
ff9fc791 HS |
17 | #include "cfg.h" |
18 | #include "cmd.h" | |
19 | ||
20 | ||
21 | #define CHAN2G(_channel, _freq, _flags) { \ | |
22 | .band = IEEE80211_BAND_2GHZ, \ | |
23 | .center_freq = (_freq), \ | |
24 | .hw_value = (_channel), \ | |
25 | .flags = (_flags), \ | |
26 | .max_antenna_gain = 0, \ | |
27 | .max_power = 30, \ | |
28 | } | |
29 | ||
30 | static struct ieee80211_channel lbs_2ghz_channels[] = { | |
31 | CHAN2G(1, 2412, 0), | |
32 | CHAN2G(2, 2417, 0), | |
33 | CHAN2G(3, 2422, 0), | |
34 | CHAN2G(4, 2427, 0), | |
35 | CHAN2G(5, 2432, 0), | |
36 | CHAN2G(6, 2437, 0), | |
37 | CHAN2G(7, 2442, 0), | |
38 | CHAN2G(8, 2447, 0), | |
39 | CHAN2G(9, 2452, 0), | |
40 | CHAN2G(10, 2457, 0), | |
41 | CHAN2G(11, 2462, 0), | |
42 | CHAN2G(12, 2467, 0), | |
43 | CHAN2G(13, 2472, 0), | |
44 | CHAN2G(14, 2484, 0), | |
45 | }; | |
46 | ||
e86dc1ca KD |
47 | #define RATETAB_ENT(_rate, _hw_value, _flags) { \ |
48 | .bitrate = (_rate), \ | |
49 | .hw_value = (_hw_value), \ | |
50 | .flags = (_flags), \ | |
ff9fc791 HS |
51 | } |
52 | ||
53 | ||
e86dc1ca | 54 | /* Table 6 in section 3.2.1.1 */ |
ff9fc791 | 55 | static struct ieee80211_rate lbs_rates[] = { |
e86dc1ca KD |
56 | RATETAB_ENT(10, 0, 0), |
57 | RATETAB_ENT(20, 1, 0), | |
58 | RATETAB_ENT(55, 2, 0), | |
59 | RATETAB_ENT(110, 3, 0), | |
60 | RATETAB_ENT(60, 9, 0), | |
61 | RATETAB_ENT(90, 6, 0), | |
62 | RATETAB_ENT(120, 7, 0), | |
63 | RATETAB_ENT(180, 8, 0), | |
64 | RATETAB_ENT(240, 9, 0), | |
65 | RATETAB_ENT(360, 10, 0), | |
66 | RATETAB_ENT(480, 11, 0), | |
67 | RATETAB_ENT(540, 12, 0), | |
ff9fc791 HS |
68 | }; |
69 | ||
70 | static struct ieee80211_supported_band lbs_band_2ghz = { | |
71 | .channels = lbs_2ghz_channels, | |
72 | .n_channels = ARRAY_SIZE(lbs_2ghz_channels), | |
73 | .bitrates = lbs_rates, | |
74 | .n_bitrates = ARRAY_SIZE(lbs_rates), | |
75 | }; | |
76 | ||
77 | ||
78 | static const u32 cipher_suites[] = { | |
79 | WLAN_CIPHER_SUITE_WEP40, | |
80 | WLAN_CIPHER_SUITE_WEP104, | |
81 | WLAN_CIPHER_SUITE_TKIP, | |
82 | WLAN_CIPHER_SUITE_CCMP, | |
83 | }; | |
84 | ||
e86dc1ca KD |
85 | /* Time to stay on the channel */ |
86 | #define LBS_DWELL_PASSIVE 100 | |
87 | #define LBS_DWELL_ACTIVE 40 | |
ff9fc791 HS |
88 | |
89 | ||
e86dc1ca KD |
90 | /*************************************************************************** |
91 | * Misc utility functions | |
92 | * | |
93 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
94 | * same structure: type, length, data*. The only difference: for IEs, the | |
95 | * type and length are u8, but for TLVs they're __le16. | |
96 | */ | |
97 | ||
98 | /* | |
99 | * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 | |
100 | * in the firmware spec | |
101 | */ | |
102 | static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) | |
103 | { | |
104 | int ret = -ENOTSUPP; | |
105 | ||
106 | switch (auth_type) { | |
107 | case NL80211_AUTHTYPE_OPEN_SYSTEM: | |
108 | case NL80211_AUTHTYPE_SHARED_KEY: | |
109 | ret = auth_type; | |
110 | break; | |
111 | case NL80211_AUTHTYPE_AUTOMATIC: | |
112 | ret = NL80211_AUTHTYPE_OPEN_SYSTEM; | |
113 | break; | |
114 | case NL80211_AUTHTYPE_NETWORK_EAP: | |
115 | ret = 0x80; | |
116 | break; | |
117 | default: | |
118 | /* silence compiler */ | |
119 | break; | |
120 | } | |
121 | return ret; | |
122 | } | |
123 | ||
124 | ||
125 | /* Various firmware commands need the list of supported rates, but with | |
126 | the hight-bit set for basic rates */ | |
127 | static int lbs_add_rates(u8 *rates) | |
128 | { | |
129 | size_t i; | |
130 | ||
131 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
132 | u8 rate = lbs_rates[i].bitrate / 5; | |
133 | if (rate == 0x02 || rate == 0x04 || | |
134 | rate == 0x0b || rate == 0x16) | |
135 | rate |= 0x80; | |
136 | rates[i] = rate; | |
137 | } | |
138 | return ARRAY_SIZE(lbs_rates); | |
139 | } | |
140 | ||
141 | ||
142 | /*************************************************************************** | |
143 | * TLV utility functions | |
144 | * | |
145 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
146 | * same structure: type, length, data*. The only difference: for IEs, the | |
147 | * type and length are u8, but for TLVs they're __le16. | |
148 | */ | |
149 | ||
150 | ||
151 | /* | |
152 | * Add ssid TLV | |
153 | */ | |
154 | #define LBS_MAX_SSID_TLV_SIZE \ | |
155 | (sizeof(struct mrvl_ie_header) \ | |
156 | + IEEE80211_MAX_SSID_LEN) | |
157 | ||
158 | static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) | |
159 | { | |
160 | struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; | |
161 | ||
162 | /* | |
163 | * TLV-ID SSID 00 00 | |
164 | * length 06 00 | |
165 | * ssid 4d 4e 54 45 53 54 | |
166 | */ | |
167 | ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); | |
168 | ssid_tlv->header.len = cpu_to_le16(ssid_len); | |
169 | memcpy(ssid_tlv->ssid, ssid, ssid_len); | |
170 | return sizeof(ssid_tlv->header) + ssid_len; | |
171 | } | |
172 | ||
173 | ||
174 | /* | |
175 | * Add channel list TLV (section 8.4.2) | |
176 | * | |
177 | * Actual channel data comes from priv->wdev->wiphy->channels. | |
178 | */ | |
179 | #define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
180 | (sizeof(struct mrvl_ie_header) \ | |
181 | + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) | |
182 | ||
183 | static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, | |
184 | int last_channel, int active_scan) | |
185 | { | |
186 | int chanscanparamsize = sizeof(struct chanscanparamset) * | |
187 | (last_channel - priv->scan_channel); | |
188 | ||
189 | struct mrvl_ie_header *header = (void *) tlv; | |
190 | ||
191 | /* | |
192 | * TLV-ID CHANLIST 01 01 | |
193 | * length 0e 00 | |
194 | * channel 00 01 00 00 00 64 00 | |
195 | * radio type 00 | |
196 | * channel 01 | |
197 | * scan type 00 | |
198 | * min scan time 00 00 | |
199 | * max scan time 64 00 | |
200 | * channel 2 00 02 00 00 00 64 00 | |
201 | * | |
202 | */ | |
203 | ||
204 | header->type = cpu_to_le16(TLV_TYPE_CHANLIST); | |
205 | header->len = cpu_to_le16(chanscanparamsize); | |
206 | tlv += sizeof(struct mrvl_ie_header); | |
207 | ||
208 | /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, | |
209 | last_channel); */ | |
210 | memset(tlv, 0, chanscanparamsize); | |
211 | ||
212 | while (priv->scan_channel < last_channel) { | |
213 | struct chanscanparamset *param = (void *) tlv; | |
214 | ||
215 | param->radiotype = CMD_SCAN_RADIO_TYPE_BG; | |
216 | param->channumber = | |
217 | priv->scan_req->channels[priv->scan_channel]->hw_value; | |
218 | if (active_scan) { | |
219 | param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); | |
220 | } else { | |
221 | param->chanscanmode.passivescan = 1; | |
222 | param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); | |
223 | } | |
224 | tlv += sizeof(struct chanscanparamset); | |
225 | priv->scan_channel++; | |
226 | } | |
227 | return sizeof(struct mrvl_ie_header) + chanscanparamsize; | |
228 | } | |
229 | ||
230 | ||
231 | /* | |
232 | * Add rates TLV | |
233 | * | |
234 | * The rates are in lbs_bg_rates[], but for the 802.11b | |
235 | * rates the high bit is set. We add this TLV only because | |
236 | * there's a firmware which otherwise doesn't report all | |
237 | * APs in range. | |
238 | */ | |
239 | #define LBS_MAX_RATES_TLV_SIZE \ | |
240 | (sizeof(struct mrvl_ie_header) \ | |
241 | + (ARRAY_SIZE(lbs_rates))) | |
242 | ||
243 | /* Adds a TLV with all rates the hardware supports */ | |
244 | static int lbs_add_supported_rates_tlv(u8 *tlv) | |
245 | { | |
246 | size_t i; | |
247 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
248 | ||
249 | /* | |
250 | * TLV-ID RATES 01 00 | |
251 | * length 0e 00 | |
252 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c | |
253 | */ | |
254 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
255 | tlv += sizeof(rate_tlv->header); | |
256 | i = lbs_add_rates(tlv); | |
257 | tlv += i; | |
258 | rate_tlv->header.len = cpu_to_le16(i); | |
259 | return sizeof(rate_tlv->header) + i; | |
260 | } | |
261 | ||
19757539 DW |
262 | /* Add common rates from a TLV and return the new end of the TLV */ |
263 | static u8 * | |
264 | add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) | |
265 | { | |
266 | int hw, ap, ap_max = ie[1]; | |
267 | u8 hw_rate; | |
268 | ||
269 | /* Advance past IE header */ | |
270 | ie += 2; | |
271 | ||
272 | lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); | |
273 | ||
274 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
275 | hw_rate = lbs_rates[hw].bitrate / 5; | |
276 | for (ap = 0; ap < ap_max; ap++) { | |
277 | if (hw_rate == (ie[ap] & 0x7f)) { | |
278 | *tlv++ = ie[ap]; | |
279 | *nrates = *nrates + 1; | |
280 | } | |
281 | } | |
282 | } | |
283 | return tlv; | |
284 | } | |
e86dc1ca KD |
285 | |
286 | /* | |
287 | * Adds a TLV with all rates the hardware *and* BSS supports. | |
288 | */ | |
289 | static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) | |
290 | { | |
291 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
19757539 DW |
292 | const u8 *rates_eid, *ext_rates_eid; |
293 | int n = 0; | |
294 | ||
295 | rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
296 | ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); | |
e86dc1ca KD |
297 | |
298 | /* | |
299 | * 01 00 TLV_TYPE_RATES | |
300 | * 04 00 len | |
301 | * 82 84 8b 96 rates | |
302 | */ | |
303 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
304 | tlv += sizeof(rate_tlv->header); | |
305 | ||
19757539 DW |
306 | /* Add basic rates */ |
307 | if (rates_eid) { | |
308 | tlv = add_ie_rates(tlv, rates_eid, &n); | |
309 | ||
310 | /* Add extended rates, if any */ | |
311 | if (ext_rates_eid) | |
312 | tlv = add_ie_rates(tlv, ext_rates_eid, &n); | |
313 | } else { | |
314 | lbs_deb_assoc("assoc: bss had no basic rate IE\n"); | |
e86dc1ca KD |
315 | /* Fallback: add basic 802.11b rates */ |
316 | *tlv++ = 0x82; | |
317 | *tlv++ = 0x84; | |
318 | *tlv++ = 0x8b; | |
319 | *tlv++ = 0x96; | |
320 | n = 4; | |
e86dc1ca KD |
321 | } |
322 | ||
323 | rate_tlv->header.len = cpu_to_le16(n); | |
324 | return sizeof(rate_tlv->header) + n; | |
325 | } | |
326 | ||
327 | ||
328 | /* | |
329 | * Add auth type TLV. | |
330 | * | |
331 | * This is only needed for newer firmware (V9 and up). | |
332 | */ | |
333 | #define LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
334 | sizeof(struct mrvl_ie_auth_type) | |
335 | ||
336 | static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) | |
337 | { | |
338 | struct mrvl_ie_auth_type *auth = (void *) tlv; | |
339 | ||
340 | /* | |
341 | * 1f 01 TLV_TYPE_AUTH_TYPE | |
342 | * 01 00 len | |
343 | * 01 auth type | |
344 | */ | |
345 | auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); | |
346 | auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); | |
347 | auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); | |
348 | return sizeof(*auth); | |
349 | } | |
350 | ||
351 | ||
352 | /* | |
353 | * Add channel (phy ds) TLV | |
354 | */ | |
355 | #define LBS_MAX_CHANNEL_TLV_SIZE \ | |
356 | sizeof(struct mrvl_ie_header) | |
357 | ||
358 | static int lbs_add_channel_tlv(u8 *tlv, u8 channel) | |
359 | { | |
360 | struct mrvl_ie_ds_param_set *ds = (void *) tlv; | |
361 | ||
362 | /* | |
363 | * 03 00 TLV_TYPE_PHY_DS | |
364 | * 01 00 len | |
365 | * 06 channel | |
366 | */ | |
367 | ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); | |
368 | ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); | |
369 | ds->channel = channel; | |
370 | return sizeof(*ds); | |
371 | } | |
372 | ||
373 | ||
374 | /* | |
375 | * Add (empty) CF param TLV of the form: | |
376 | */ | |
377 | #define LBS_MAX_CF_PARAM_TLV_SIZE \ | |
378 | sizeof(struct mrvl_ie_header) | |
379 | ||
380 | static int lbs_add_cf_param_tlv(u8 *tlv) | |
381 | { | |
382 | struct mrvl_ie_cf_param_set *cf = (void *)tlv; | |
383 | ||
384 | /* | |
385 | * 04 00 TLV_TYPE_CF | |
386 | * 06 00 len | |
387 | * 00 cfpcnt | |
388 | * 00 cfpperiod | |
389 | * 00 00 cfpmaxduration | |
390 | * 00 00 cfpdurationremaining | |
391 | */ | |
392 | cf->header.type = cpu_to_le16(TLV_TYPE_CF); | |
393 | cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); | |
394 | return sizeof(*cf); | |
395 | } | |
396 | ||
397 | /* | |
398 | * Add WPA TLV | |
399 | */ | |
400 | #define LBS_MAX_WPA_TLV_SIZE \ | |
401 | (sizeof(struct mrvl_ie_header) \ | |
402 | + 128 /* TODO: I guessed the size */) | |
403 | ||
404 | static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) | |
405 | { | |
406 | size_t tlv_len; | |
407 | ||
408 | /* | |
409 | * We need just convert an IE to an TLV. IEs use u8 for the header, | |
410 | * u8 type | |
411 | * u8 len | |
412 | * u8[] data | |
413 | * but TLVs use __le16 instead: | |
414 | * __le16 type | |
415 | * __le16 len | |
416 | * u8[] data | |
417 | */ | |
418 | *tlv++ = *ie++; | |
419 | *tlv++ = 0; | |
420 | tlv_len = *tlv++ = *ie++; | |
421 | *tlv++ = 0; | |
422 | while (tlv_len--) | |
423 | *tlv++ = *ie++; | |
424 | /* the TLV is two bytes larger than the IE */ | |
425 | return ie_len + 2; | |
426 | } | |
427 | ||
428 | /*************************************************************************** | |
429 | * Set Channel | |
430 | */ | |
431 | ||
ff9fc791 | 432 | static int lbs_cfg_set_channel(struct wiphy *wiphy, |
f444de05 | 433 | struct net_device *netdev, |
e86dc1ca | 434 | struct ieee80211_channel *channel, |
ff9fc791 HS |
435 | enum nl80211_channel_type channel_type) |
436 | { | |
437 | struct lbs_private *priv = wiphy_priv(wiphy); | |
e86dc1ca KD |
438 | int ret = -ENOTSUPP; |
439 | ||
440 | lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", | |
441 | channel->center_freq, channel_type); | |
442 | ||
443 | if (channel_type != NL80211_CHAN_NO_HT) | |
444 | goto out; | |
445 | ||
446 | ret = lbs_set_channel(priv, channel->hw_value); | |
447 | ||
448 | out: | |
449 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
450 | return ret; | |
451 | } | |
452 | ||
453 | ||
454 | ||
455 | /*************************************************************************** | |
456 | * Scanning | |
457 | */ | |
458 | ||
459 | /* | |
460 | * When scanning, the firmware doesn't send a nul packet with the power-safe | |
461 | * bit to the AP. So we cannot stay away from our current channel too long, | |
462 | * otherwise we loose data. So take a "nap" while scanning every other | |
463 | * while. | |
464 | */ | |
465 | #define LBS_SCAN_BEFORE_NAP 4 | |
466 | ||
467 | ||
468 | /* | |
469 | * When the firmware reports back a scan-result, it gives us an "u8 rssi", | |
470 | * which isn't really an RSSI, as it becomes larger when moving away from | |
471 | * the AP. Anyway, we need to convert that into mBm. | |
472 | */ | |
473 | #define LBS_SCAN_RSSI_TO_MBM(rssi) \ | |
474 | ((-(int)rssi + 3)*100) | |
475 | ||
476 | static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, | |
477 | struct cmd_header *resp) | |
478 | { | |
479 | struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; | |
480 | int bsssize; | |
481 | const u8 *pos; | |
e86dc1ca KD |
482 | const u8 *tsfdesc; |
483 | int tsfsize; | |
484 | int i; | |
485 | int ret = -EILSEQ; | |
486 | ||
487 | lbs_deb_enter(LBS_DEB_CFG80211); | |
488 | ||
489 | bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); | |
aebb628f DW |
490 | |
491 | lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n", | |
65a602dd | 492 | scanresp->nr_sets, bsssize, le16_to_cpu(resp->size)); |
aebb628f | 493 | |
65a602dd | 494 | if (scanresp->nr_sets == 0) { |
aebb628f DW |
495 | ret = 0; |
496 | goto done; | |
497 | } | |
e86dc1ca KD |
498 | |
499 | /* | |
500 | * The general layout of the scan response is described in chapter | |
501 | * 5.7.1. Basically we have a common part, then any number of BSS | |
502 | * descriptor sections. Finally we have section with the same number | |
503 | * of TSFs. | |
504 | * | |
505 | * cmd_ds_802_11_scan_rsp | |
506 | * cmd_header | |
507 | * pos_size | |
508 | * nr_sets | |
509 | * bssdesc 1 | |
510 | * bssid | |
511 | * rssi | |
512 | * timestamp | |
513 | * intvl | |
514 | * capa | |
515 | * IEs | |
516 | * bssdesc 2 | |
517 | * bssdesc n | |
518 | * MrvlIEtypes_TsfFimestamp_t | |
519 | * TSF for BSS 1 | |
520 | * TSF for BSS 2 | |
521 | * TSF for BSS n | |
522 | */ | |
523 | ||
524 | pos = scanresp->bssdesc_and_tlvbuffer; | |
525 | ||
4083858c DW |
526 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer, |
527 | scanresp->bssdescriptsize); | |
528 | ||
e86dc1ca KD |
529 | tsfdesc = pos + bsssize; |
530 | tsfsize = 4 + 8 * scanresp->nr_sets; | |
4083858c | 531 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize); |
e86dc1ca KD |
532 | |
533 | /* Validity check: we expect a Marvell-Local TLV */ | |
534 | i = get_unaligned_le16(tsfdesc); | |
535 | tsfdesc += 2; | |
4083858c DW |
536 | if (i != TLV_TYPE_TSFTIMESTAMP) { |
537 | lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i); | |
e86dc1ca | 538 | goto done; |
4083858c DW |
539 | } |
540 | ||
e86dc1ca KD |
541 | /* Validity check: the TLV holds TSF values with 8 bytes each, so |
542 | * the size in the TLV must match the nr_sets value */ | |
543 | i = get_unaligned_le16(tsfdesc); | |
544 | tsfdesc += 2; | |
4083858c DW |
545 | if (i / 8 != scanresp->nr_sets) { |
546 | lbs_deb_scan("scan response: invalid number of TSF timestamp " | |
547 | "sets (expected %d got %d)\n", scanresp->nr_sets, | |
548 | i / 8); | |
e86dc1ca | 549 | goto done; |
4083858c | 550 | } |
e86dc1ca KD |
551 | |
552 | for (i = 0; i < scanresp->nr_sets; i++) { | |
553 | const u8 *bssid; | |
554 | const u8 *ie; | |
555 | int left; | |
556 | int ielen; | |
557 | int rssi; | |
558 | u16 intvl; | |
559 | u16 capa; | |
560 | int chan_no = -1; | |
561 | const u8 *ssid = NULL; | |
562 | u8 ssid_len = 0; | |
563 | DECLARE_SSID_BUF(ssid_buf); | |
564 | ||
565 | int len = get_unaligned_le16(pos); | |
566 | pos += 2; | |
567 | ||
568 | /* BSSID */ | |
569 | bssid = pos; | |
570 | pos += ETH_ALEN; | |
571 | /* RSSI */ | |
572 | rssi = *pos++; | |
573 | /* Packet time stamp */ | |
574 | pos += 8; | |
575 | /* Beacon interval */ | |
576 | intvl = get_unaligned_le16(pos); | |
577 | pos += 2; | |
578 | /* Capabilities */ | |
579 | capa = get_unaligned_le16(pos); | |
580 | pos += 2; | |
581 | ||
582 | /* To find out the channel, we must parse the IEs */ | |
583 | ie = pos; | |
584 | /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon | |
585 | interval, capabilities */ | |
586 | ielen = left = len - (6 + 1 + 8 + 2 + 2); | |
587 | while (left >= 2) { | |
588 | u8 id, elen; | |
589 | id = *pos++; | |
590 | elen = *pos++; | |
591 | left -= 2; | |
4083858c DW |
592 | if (elen > left || elen == 0) { |
593 | lbs_deb_scan("scan response: invalid IE fmt\n"); | |
e86dc1ca | 594 | goto done; |
4083858c DW |
595 | } |
596 | ||
e86dc1ca KD |
597 | if (id == WLAN_EID_DS_PARAMS) |
598 | chan_no = *pos; | |
599 | if (id == WLAN_EID_SSID) { | |
600 | ssid = pos; | |
601 | ssid_len = elen; | |
602 | } | |
603 | left -= elen; | |
604 | pos += elen; | |
605 | } | |
606 | ||
607 | /* No channel, no luck */ | |
608 | if (chan_no != -1) { | |
609 | struct wiphy *wiphy = priv->wdev->wiphy; | |
59eb21a6 BR |
610 | int freq = ieee80211_channel_to_frequency(chan_no, |
611 | IEEE80211_BAND_2GHZ); | |
e86dc1ca KD |
612 | struct ieee80211_channel *channel = |
613 | ieee80211_get_channel(wiphy, freq); | |
614 | ||
615 | lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %s, " | |
616 | "%d dBm\n", | |
617 | bssid, capa, chan_no, | |
618 | print_ssid(ssid_buf, ssid, ssid_len), | |
619 | LBS_SCAN_RSSI_TO_MBM(rssi)/100); | |
620 | ||
4a55d585 | 621 | if (channel && |
e86dc1ca KD |
622 | !(channel->flags & IEEE80211_CHAN_DISABLED)) |
623 | cfg80211_inform_bss(wiphy, channel, | |
624 | bssid, le64_to_cpu(*(__le64 *)tsfdesc), | |
625 | capa, intvl, ie, ielen, | |
626 | LBS_SCAN_RSSI_TO_MBM(rssi), | |
627 | GFP_KERNEL); | |
4083858c DW |
628 | } else |
629 | lbs_deb_scan("scan response: missing BSS channel IE\n"); | |
630 | ||
e86dc1ca KD |
631 | tsfdesc += 8; |
632 | } | |
633 | ret = 0; | |
634 | ||
635 | done: | |
636 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | |
637 | return ret; | |
638 | } | |
639 | ||
640 | ||
641 | /* | |
642 | * Our scan command contains a TLV, consting of a SSID TLV, a channel list | |
643 | * TLV and a rates TLV. Determine the maximum size of them: | |
644 | */ | |
645 | #define LBS_SCAN_MAX_CMD_SIZE \ | |
646 | (sizeof(struct cmd_ds_802_11_scan) \ | |
647 | + LBS_MAX_SSID_TLV_SIZE \ | |
648 | + LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
649 | + LBS_MAX_RATES_TLV_SIZE) | |
650 | ||
651 | /* | |
652 | * Assumes priv->scan_req is initialized and valid | |
653 | * Assumes priv->scan_channel is initialized | |
654 | */ | |
655 | static void lbs_scan_worker(struct work_struct *work) | |
656 | { | |
657 | struct lbs_private *priv = | |
658 | container_of(work, struct lbs_private, scan_work.work); | |
659 | struct cmd_ds_802_11_scan *scan_cmd; | |
660 | u8 *tlv; /* pointer into our current, growing TLV storage area */ | |
661 | int last_channel; | |
662 | int running, carrier; | |
663 | ||
664 | lbs_deb_enter(LBS_DEB_SCAN); | |
665 | ||
666 | scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); | |
667 | if (scan_cmd == NULL) | |
668 | goto out_no_scan_cmd; | |
669 | ||
670 | /* prepare fixed part of scan command */ | |
671 | scan_cmd->bsstype = CMD_BSS_TYPE_ANY; | |
672 | ||
673 | /* stop network while we're away from our main channel */ | |
674 | running = !netif_queue_stopped(priv->dev); | |
675 | carrier = netif_carrier_ok(priv->dev); | |
676 | if (running) | |
677 | netif_stop_queue(priv->dev); | |
678 | if (carrier) | |
679 | netif_carrier_off(priv->dev); | |
680 | ||
681 | /* prepare fixed part of scan command */ | |
682 | tlv = scan_cmd->tlvbuffer; | |
683 | ||
684 | /* add SSID TLV */ | |
685 | if (priv->scan_req->n_ssids) | |
686 | tlv += lbs_add_ssid_tlv(tlv, | |
687 | priv->scan_req->ssids[0].ssid, | |
688 | priv->scan_req->ssids[0].ssid_len); | |
689 | ||
690 | /* add channel TLVs */ | |
691 | last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; | |
692 | if (last_channel > priv->scan_req->n_channels) | |
693 | last_channel = priv->scan_req->n_channels; | |
694 | tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, | |
695 | priv->scan_req->n_ssids); | |
696 | ||
697 | /* add rates TLV */ | |
698 | tlv += lbs_add_supported_rates_tlv(tlv); | |
699 | ||
700 | if (priv->scan_channel < priv->scan_req->n_channels) { | |
701 | cancel_delayed_work(&priv->scan_work); | |
2e30168b DD |
702 | if (!priv->stopping) |
703 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
704 | msecs_to_jiffies(300)); | |
e86dc1ca KD |
705 | } |
706 | ||
707 | /* This is the final data we are about to send */ | |
708 | scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); | |
709 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, | |
710 | sizeof(*scan_cmd)); | |
711 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, | |
712 | tlv - scan_cmd->tlvbuffer); | |
713 | ||
714 | __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, | |
715 | le16_to_cpu(scan_cmd->hdr.size), | |
716 | lbs_ret_scan, 0); | |
717 | ||
718 | if (priv->scan_channel >= priv->scan_req->n_channels) { | |
719 | /* Mark scan done */ | |
cc026819 DW |
720 | if (priv->internal_scan) |
721 | kfree(priv->scan_req); | |
722 | else | |
723 | cfg80211_scan_done(priv->scan_req, false); | |
724 | ||
e86dc1ca | 725 | priv->scan_req = NULL; |
cc026819 | 726 | priv->last_scan = jiffies; |
e86dc1ca KD |
727 | } |
728 | ||
729 | /* Restart network */ | |
730 | if (carrier) | |
731 | netif_carrier_on(priv->dev); | |
732 | if (running && !priv->tx_pending_len) | |
733 | netif_wake_queue(priv->dev); | |
734 | ||
735 | kfree(scan_cmd); | |
736 | ||
cc026819 DW |
737 | /* Wake up anything waiting on scan completion */ |
738 | if (priv->scan_req == NULL) { | |
739 | lbs_deb_scan("scan: waking up waiters\n"); | |
740 | wake_up_all(&priv->scan_q); | |
741 | } | |
742 | ||
e86dc1ca KD |
743 | out_no_scan_cmd: |
744 | lbs_deb_leave(LBS_DEB_SCAN); | |
745 | } | |
746 | ||
cc026819 DW |
747 | static void _internal_start_scan(struct lbs_private *priv, bool internal, |
748 | struct cfg80211_scan_request *request) | |
749 | { | |
750 | lbs_deb_enter(LBS_DEB_CFG80211); | |
751 | ||
752 | lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", | |
753 | request->n_ssids, request->n_channels, request->ie_len); | |
754 | ||
755 | priv->scan_channel = 0; | |
756 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
757 | msecs_to_jiffies(50)); | |
758 | ||
759 | priv->scan_req = request; | |
760 | priv->internal_scan = internal; | |
761 | ||
762 | lbs_deb_leave(LBS_DEB_CFG80211); | |
763 | } | |
e86dc1ca KD |
764 | |
765 | static int lbs_cfg_scan(struct wiphy *wiphy, | |
766 | struct net_device *dev, | |
767 | struct cfg80211_scan_request *request) | |
768 | { | |
769 | struct lbs_private *priv = wiphy_priv(wiphy); | |
770 | int ret = 0; | |
771 | ||
772 | lbs_deb_enter(LBS_DEB_CFG80211); | |
773 | ||
774 | if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { | |
775 | /* old scan request not yet processed */ | |
776 | ret = -EAGAIN; | |
777 | goto out; | |
778 | } | |
779 | ||
cc026819 | 780 | _internal_start_scan(priv, false, request); |
e86dc1ca KD |
781 | |
782 | if (priv->surpriseremoved) | |
783 | ret = -EIO; | |
784 | ||
e86dc1ca KD |
785 | out: |
786 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
787 | return ret; | |
788 | } | |
789 | ||
790 | ||
791 | ||
792 | ||
793 | /*************************************************************************** | |
794 | * Events | |
795 | */ | |
796 | ||
797 | void lbs_send_disconnect_notification(struct lbs_private *priv) | |
798 | { | |
799 | lbs_deb_enter(LBS_DEB_CFG80211); | |
800 | ||
801 | cfg80211_disconnected(priv->dev, | |
802 | 0, | |
803 | NULL, 0, | |
804 | GFP_KERNEL); | |
805 | ||
806 | lbs_deb_leave(LBS_DEB_CFG80211); | |
807 | } | |
808 | ||
809 | void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) | |
810 | { | |
811 | lbs_deb_enter(LBS_DEB_CFG80211); | |
812 | ||
813 | cfg80211_michael_mic_failure(priv->dev, | |
814 | priv->assoc_bss, | |
815 | event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? | |
816 | NL80211_KEYTYPE_GROUP : | |
817 | NL80211_KEYTYPE_PAIRWISE, | |
818 | -1, | |
819 | NULL, | |
820 | GFP_KERNEL); | |
821 | ||
822 | lbs_deb_leave(LBS_DEB_CFG80211); | |
823 | } | |
824 | ||
825 | ||
826 | ||
827 | ||
828 | /*************************************************************************** | |
829 | * Connect/disconnect | |
830 | */ | |
831 | ||
832 | ||
833 | /* | |
834 | * This removes all WEP keys | |
835 | */ | |
836 | static int lbs_remove_wep_keys(struct lbs_private *priv) | |
837 | { | |
838 | struct cmd_ds_802_11_set_wep cmd; | |
839 | int ret; | |
840 | ||
841 | lbs_deb_enter(LBS_DEB_CFG80211); | |
842 | ||
843 | memset(&cmd, 0, sizeof(cmd)); | |
844 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
845 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
846 | cmd.action = cpu_to_le16(CMD_ACT_REMOVE); | |
847 | ||
848 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
849 | ||
850 | lbs_deb_leave(LBS_DEB_CFG80211); | |
851 | return ret; | |
852 | } | |
853 | ||
854 | /* | |
855 | * Set WEP keys | |
856 | */ | |
857 | static int lbs_set_wep_keys(struct lbs_private *priv) | |
858 | { | |
859 | struct cmd_ds_802_11_set_wep cmd; | |
860 | int i; | |
861 | int ret; | |
862 | ||
863 | lbs_deb_enter(LBS_DEB_CFG80211); | |
864 | ||
865 | /* | |
866 | * command 13 00 | |
867 | * size 50 00 | |
868 | * sequence xx xx | |
869 | * result 00 00 | |
870 | * action 02 00 ACT_ADD | |
871 | * transmit key 00 00 | |
872 | * type for key 1 01 WEP40 | |
873 | * type for key 2 00 | |
874 | * type for key 3 00 | |
875 | * type for key 4 00 | |
876 | * key 1 39 39 39 39 39 00 00 00 | |
877 | * 00 00 00 00 00 00 00 00 | |
878 | * key 2 00 00 00 00 00 00 00 00 | |
879 | * 00 00 00 00 00 00 00 00 | |
880 | * key 3 00 00 00 00 00 00 00 00 | |
881 | * 00 00 00 00 00 00 00 00 | |
882 | * key 4 00 00 00 00 00 00 00 00 | |
883 | */ | |
884 | if (priv->wep_key_len[0] || priv->wep_key_len[1] || | |
885 | priv->wep_key_len[2] || priv->wep_key_len[3]) { | |
886 | /* Only set wep keys if we have at least one of them */ | |
887 | memset(&cmd, 0, sizeof(cmd)); | |
888 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
889 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
890 | cmd.action = cpu_to_le16(CMD_ACT_ADD); | |
891 | ||
892 | for (i = 0; i < 4; i++) { | |
893 | switch (priv->wep_key_len[i]) { | |
894 | case WLAN_KEY_LEN_WEP40: | |
895 | cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; | |
896 | break; | |
897 | case WLAN_KEY_LEN_WEP104: | |
898 | cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; | |
899 | break; | |
900 | default: | |
901 | cmd.keytype[i] = 0; | |
902 | break; | |
903 | } | |
904 | memcpy(cmd.keymaterial[i], priv->wep_key[i], | |
905 | priv->wep_key_len[i]); | |
906 | } | |
907 | ||
908 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
909 | } else { | |
910 | /* Otherwise remove all wep keys */ | |
911 | ret = lbs_remove_wep_keys(priv); | |
912 | } | |
913 | ||
914 | lbs_deb_leave(LBS_DEB_CFG80211); | |
915 | return ret; | |
916 | } | |
917 | ||
918 | ||
919 | /* | |
920 | * Enable/Disable RSN status | |
921 | */ | |
922 | static int lbs_enable_rsn(struct lbs_private *priv, int enable) | |
923 | { | |
924 | struct cmd_ds_802_11_enable_rsn cmd; | |
925 | int ret; | |
926 | ||
927 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", enable); | |
928 | ||
929 | /* | |
930 | * cmd 2f 00 | |
931 | * size 0c 00 | |
932 | * sequence xx xx | |
933 | * result 00 00 | |
934 | * action 01 00 ACT_SET | |
935 | * enable 01 00 | |
936 | */ | |
937 | memset(&cmd, 0, sizeof(cmd)); | |
938 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
939 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
940 | cmd.enable = cpu_to_le16(enable); | |
941 | ||
942 | ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); | |
943 | ||
944 | lbs_deb_leave(LBS_DEB_CFG80211); | |
945 | return ret; | |
946 | } | |
947 | ||
948 | ||
949 | /* | |
950 | * Set WPA/WPA key material | |
951 | */ | |
952 | ||
953 | /* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we | |
954 | * get rid of WEXT, this should go into host.h */ | |
955 | ||
956 | struct cmd_key_material { | |
957 | struct cmd_header hdr; | |
958 | ||
959 | __le16 action; | |
960 | struct MrvlIEtype_keyParamSet param; | |
beabe914 | 961 | } __packed; |
e86dc1ca KD |
962 | |
963 | static int lbs_set_key_material(struct lbs_private *priv, | |
964 | int key_type, | |
965 | int key_info, | |
966 | u8 *key, u16 key_len) | |
967 | { | |
968 | struct cmd_key_material cmd; | |
969 | int ret; | |
970 | ||
971 | lbs_deb_enter(LBS_DEB_CFG80211); | |
972 | ||
973 | /* | |
974 | * Example for WPA (TKIP): | |
975 | * | |
976 | * cmd 5e 00 | |
977 | * size 34 00 | |
978 | * sequence xx xx | |
979 | * result 00 00 | |
980 | * action 01 00 | |
981 | * TLV type 00 01 key param | |
982 | * length 00 26 | |
983 | * key type 01 00 TKIP | |
984 | * key info 06 00 UNICAST | ENABLED | |
985 | * key len 20 00 | |
986 | * key 32 bytes | |
987 | */ | |
988 | memset(&cmd, 0, sizeof(cmd)); | |
989 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
990 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
991 | cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); | |
992 | cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); | |
993 | cmd.param.keytypeid = cpu_to_le16(key_type); | |
994 | cmd.param.keyinfo = cpu_to_le16(key_info); | |
995 | cmd.param.keylen = cpu_to_le16(key_len); | |
996 | if (key && key_len) | |
997 | memcpy(cmd.param.key, key, key_len); | |
998 | ||
999 | ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); | |
1000 | ||
1001 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1002 | return ret; | |
1003 | } | |
1004 | ||
1005 | ||
1006 | /* | |
1007 | * Sets the auth type (open, shared, etc) in the firmware. That | |
1008 | * we use CMD_802_11_AUTHENTICATE is misleading, this firmware | |
1009 | * command doesn't send an authentication frame at all, it just | |
1010 | * stores the auth_type. | |
1011 | */ | |
1012 | static int lbs_set_authtype(struct lbs_private *priv, | |
1013 | struct cfg80211_connect_params *sme) | |
1014 | { | |
1015 | struct cmd_ds_802_11_authenticate cmd; | |
1016 | int ret; | |
1017 | ||
1018 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", sme->auth_type); | |
1019 | ||
1020 | /* | |
1021 | * cmd 11 00 | |
1022 | * size 19 00 | |
1023 | * sequence xx xx | |
1024 | * result 00 00 | |
1025 | * BSS id 00 13 19 80 da 30 | |
1026 | * auth type 00 | |
1027 | * reserved 00 00 00 00 00 00 00 00 00 00 | |
1028 | */ | |
1029 | memset(&cmd, 0, sizeof(cmd)); | |
1030 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1031 | if (sme->bssid) | |
1032 | memcpy(cmd.bssid, sme->bssid, ETH_ALEN); | |
1033 | /* convert auth_type */ | |
1034 | ret = lbs_auth_to_authtype(sme->auth_type); | |
1035 | if (ret < 0) | |
1036 | goto done; | |
1037 | ||
1038 | cmd.authtype = ret; | |
1039 | ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); | |
1040 | ||
1041 | done: | |
1042 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1043 | return ret; | |
1044 | } | |
1045 | ||
1046 | ||
1047 | /* | |
1048 | * Create association request | |
1049 | */ | |
1050 | #define LBS_ASSOC_MAX_CMD_SIZE \ | |
1051 | (sizeof(struct cmd_ds_802_11_associate) \ | |
1052 | - 512 /* cmd_ds_802_11_associate.iebuf */ \ | |
1053 | + LBS_MAX_SSID_TLV_SIZE \ | |
1054 | + LBS_MAX_CHANNEL_TLV_SIZE \ | |
1055 | + LBS_MAX_CF_PARAM_TLV_SIZE \ | |
1056 | + LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
1057 | + LBS_MAX_WPA_TLV_SIZE) | |
1058 | ||
1059 | static int lbs_associate(struct lbs_private *priv, | |
1060 | struct cfg80211_bss *bss, | |
1061 | struct cfg80211_connect_params *sme) | |
1062 | { | |
1063 | struct cmd_ds_802_11_associate_response *resp; | |
1064 | struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, | |
1065 | GFP_KERNEL); | |
1066 | const u8 *ssid_eid; | |
1067 | size_t len, resp_ie_len; | |
1068 | int status; | |
1069 | int ret; | |
1070 | u8 *pos = &(cmd->iebuf[0]); | |
19757539 | 1071 | u8 *tmp; |
e86dc1ca KD |
1072 | |
1073 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1074 | ||
1075 | if (!cmd) { | |
1076 | ret = -ENOMEM; | |
1077 | goto done; | |
1078 | } | |
1079 | ||
1080 | /* | |
1081 | * cmd 50 00 | |
1082 | * length 34 00 | |
1083 | * sequence xx xx | |
1084 | * result 00 00 | |
1085 | * BSS id 00 13 19 80 da 30 | |
1086 | * capabilities 11 00 | |
1087 | * listen interval 0a 00 | |
1088 | * beacon interval 00 00 | |
1089 | * DTIM period 00 | |
1090 | * TLVs xx (up to 512 bytes) | |
1091 | */ | |
1092 | cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); | |
1093 | ||
1094 | /* Fill in static fields */ | |
1095 | memcpy(cmd->bssid, bss->bssid, ETH_ALEN); | |
1096 | cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); | |
1097 | cmd->capability = cpu_to_le16(bss->capability); | |
1098 | ||
1099 | /* add SSID TLV */ | |
1100 | ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); | |
1101 | if (ssid_eid) | |
1102 | pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); | |
1103 | else | |
1104 | lbs_deb_assoc("no SSID\n"); | |
1105 | ||
1106 | /* add DS param TLV */ | |
1107 | if (bss->channel) | |
1108 | pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); | |
1109 | else | |
1110 | lbs_deb_assoc("no channel\n"); | |
1111 | ||
1112 | /* add (empty) CF param TLV */ | |
1113 | pos += lbs_add_cf_param_tlv(pos); | |
1114 | ||
1115 | /* add rates TLV */ | |
19757539 | 1116 | tmp = pos + 4; /* skip Marvell IE header */ |
e86dc1ca | 1117 | pos += lbs_add_common_rates_tlv(pos, bss); |
19757539 | 1118 | lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); |
e86dc1ca KD |
1119 | |
1120 | /* add auth type TLV */ | |
86df5f72 | 1121 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9) |
e86dc1ca KD |
1122 | pos += lbs_add_auth_type_tlv(pos, sme->auth_type); |
1123 | ||
1124 | /* add WPA/WPA2 TLV */ | |
1125 | if (sme->ie && sme->ie_len) | |
1126 | pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); | |
1127 | ||
1128 | len = (sizeof(*cmd) - sizeof(cmd->iebuf)) + | |
1129 | (u16)(pos - (u8 *) &cmd->iebuf); | |
1130 | cmd->hdr.size = cpu_to_le16(len); | |
1131 | ||
86df5f72 DW |
1132 | lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd, |
1133 | le16_to_cpu(cmd->hdr.size)); | |
1134 | ||
e86dc1ca KD |
1135 | /* store for later use */ |
1136 | memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); | |
1137 | ||
1138 | ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); | |
1139 | if (ret) | |
1140 | goto done; | |
1141 | ||
e86dc1ca KD |
1142 | /* generate connect message to cfg80211 */ |
1143 | ||
1144 | resp = (void *) cmd; /* recast for easier field access */ | |
1145 | status = le16_to_cpu(resp->statuscode); | |
1146 | ||
86df5f72 DW |
1147 | /* Older FW versions map the IEEE 802.11 Status Code in the association |
1148 | * response to the following values returned in resp->statuscode: | |
1149 | * | |
1150 | * IEEE Status Code Marvell Status Code | |
1151 | * 0 -> 0x0000 ASSOC_RESULT_SUCCESS | |
1152 | * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1153 | * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1154 | * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1155 | * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1156 | * others -> 0x0003 ASSOC_RESULT_REFUSED | |
1157 | * | |
1158 | * Other response codes: | |
1159 | * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) | |
1160 | * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for | |
1161 | * association response from the AP) | |
1162 | */ | |
1163 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { | |
e86dc1ca KD |
1164 | switch (status) { |
1165 | case 0: | |
1166 | break; | |
1167 | case 1: | |
1168 | lbs_deb_assoc("invalid association parameters\n"); | |
1169 | status = WLAN_STATUS_CAPS_UNSUPPORTED; | |
1170 | break; | |
1171 | case 2: | |
1172 | lbs_deb_assoc("timer expired while waiting for AP\n"); | |
1173 | status = WLAN_STATUS_AUTH_TIMEOUT; | |
1174 | break; | |
1175 | case 3: | |
1176 | lbs_deb_assoc("association refused by AP\n"); | |
1177 | status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; | |
1178 | break; | |
1179 | case 4: | |
1180 | lbs_deb_assoc("authentication refused by AP\n"); | |
1181 | status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; | |
1182 | break; | |
1183 | default: | |
1184 | lbs_deb_assoc("association failure %d\n", status); | |
86df5f72 DW |
1185 | /* v5 OLPC firmware does return the AP status code if |
1186 | * it's not one of the values above. Let that through. | |
1187 | */ | |
1188 | break; | |
1189 | } | |
e86dc1ca KD |
1190 | } |
1191 | ||
86df5f72 DW |
1192 | lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, " |
1193 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), | |
1194 | le16_to_cpu(resp->capability), le16_to_cpu(resp->aid)); | |
e86dc1ca KD |
1195 | |
1196 | resp_ie_len = le16_to_cpu(resp->hdr.size) | |
1197 | - sizeof(resp->hdr) | |
1198 | - 6; | |
1199 | cfg80211_connect_result(priv->dev, | |
1200 | priv->assoc_bss, | |
1201 | sme->ie, sme->ie_len, | |
1202 | resp->iebuf, resp_ie_len, | |
1203 | status, | |
1204 | GFP_KERNEL); | |
1205 | ||
1206 | if (status == 0) { | |
1207 | /* TODO: get rid of priv->connect_status */ | |
1208 | priv->connect_status = LBS_CONNECTED; | |
1209 | netif_carrier_on(priv->dev); | |
1210 | if (!priv->tx_pending_len) | |
1211 | netif_tx_wake_all_queues(priv->dev); | |
1212 | } | |
1213 | ||
e86dc1ca KD |
1214 | done: |
1215 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1216 | return ret; | |
1217 | } | |
1218 | ||
cc026819 DW |
1219 | static struct cfg80211_scan_request * |
1220 | _new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme) | |
1221 | { | |
1222 | struct cfg80211_scan_request *creq = NULL; | |
1223 | int i, n_channels = 0; | |
1224 | enum ieee80211_band band; | |
1225 | ||
1226 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
1227 | if (wiphy->bands[band]) | |
1228 | n_channels += wiphy->bands[band]->n_channels; | |
1229 | } | |
1230 | ||
1231 | creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + | |
1232 | n_channels * sizeof(void *), | |
1233 | GFP_ATOMIC); | |
1234 | if (!creq) | |
1235 | return NULL; | |
1236 | ||
1237 | /* SSIDs come after channels */ | |
1238 | creq->ssids = (void *)&creq->channels[n_channels]; | |
1239 | creq->n_channels = n_channels; | |
1240 | creq->n_ssids = 1; | |
1241 | ||
1242 | /* Scan all available channels */ | |
1243 | i = 0; | |
1244 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
1245 | int j; | |
1246 | ||
1247 | if (!wiphy->bands[band]) | |
1248 | continue; | |
1249 | ||
1250 | for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | |
1251 | /* ignore disabled channels */ | |
1252 | if (wiphy->bands[band]->channels[j].flags & | |
1253 | IEEE80211_CHAN_DISABLED) | |
1254 | continue; | |
1255 | ||
1256 | creq->channels[i] = &wiphy->bands[band]->channels[j]; | |
1257 | i++; | |
1258 | } | |
1259 | } | |
1260 | if (i) { | |
1261 | /* Set real number of channels specified in creq->channels[] */ | |
1262 | creq->n_channels = i; | |
1263 | ||
1264 | /* Scan for the SSID we're going to connect to */ | |
1265 | memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len); | |
1266 | creq->ssids[0].ssid_len = sme->ssid_len; | |
1267 | } else { | |
1268 | /* No channels found... */ | |
1269 | kfree(creq); | |
1270 | creq = NULL; | |
1271 | } | |
e86dc1ca | 1272 | |
cc026819 DW |
1273 | return creq; |
1274 | } | |
e86dc1ca KD |
1275 | |
1276 | static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, | |
1277 | struct cfg80211_connect_params *sme) | |
1278 | { | |
1279 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1280 | struct cfg80211_bss *bss = NULL; | |
1281 | int ret = 0; | |
1282 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1283 | ||
1284 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1285 | ||
cc026819 DW |
1286 | if (!sme->bssid) { |
1287 | /* Run a scan if one isn't in-progress already and if the last | |
1288 | * scan was done more than 2 seconds ago. | |
e86dc1ca | 1289 | */ |
cc026819 DW |
1290 | if (priv->scan_req == NULL && |
1291 | time_after(jiffies, priv->last_scan + (2 * HZ))) { | |
1292 | struct cfg80211_scan_request *creq; | |
e86dc1ca | 1293 | |
cc026819 DW |
1294 | creq = _new_connect_scan_req(wiphy, sme); |
1295 | if (!creq) { | |
1296 | ret = -EINVAL; | |
1297 | goto done; | |
1298 | } | |
1299 | ||
1300 | lbs_deb_assoc("assoc: scanning for compatible AP\n"); | |
1301 | _internal_start_scan(priv, true, creq); | |
1302 | } | |
1303 | ||
1304 | /* Wait for any in-progress scan to complete */ | |
1305 | lbs_deb_assoc("assoc: waiting for scan to complete\n"); | |
1306 | wait_event_interruptible_timeout(priv->scan_q, | |
1307 | (priv->scan_req == NULL), | |
1308 | (15 * HZ)); | |
1309 | lbs_deb_assoc("assoc: scanning competed\n"); | |
1310 | } | |
e86dc1ca | 1311 | |
cc026819 DW |
1312 | /* Find the BSS we want using available scan results */ |
1313 | bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, | |
1314 | sme->ssid, sme->ssid_len, | |
1315 | WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); | |
e86dc1ca | 1316 | if (!bss) { |
cc026819 | 1317 | lbs_pr_err("assoc: bss %pM not in scan results\n", |
e86dc1ca KD |
1318 | sme->bssid); |
1319 | ret = -ENOENT; | |
1320 | goto done; | |
1321 | } | |
cc026819 | 1322 | lbs_deb_assoc("trying %pM\n", bss->bssid); |
e86dc1ca KD |
1323 | lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", |
1324 | sme->crypto.cipher_group, | |
1325 | sme->key_idx, sme->key_len); | |
1326 | ||
1327 | /* As this is a new connection, clear locally stored WEP keys */ | |
1328 | priv->wep_tx_key = 0; | |
1329 | memset(priv->wep_key, 0, sizeof(priv->wep_key)); | |
1330 | memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); | |
1331 | ||
1332 | /* set/remove WEP keys */ | |
1333 | switch (sme->crypto.cipher_group) { | |
1334 | case WLAN_CIPHER_SUITE_WEP40: | |
1335 | case WLAN_CIPHER_SUITE_WEP104: | |
1336 | /* Store provided WEP keys in priv-> */ | |
1337 | priv->wep_tx_key = sme->key_idx; | |
1338 | priv->wep_key_len[sme->key_idx] = sme->key_len; | |
1339 | memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); | |
1340 | /* Set WEP keys and WEP mode */ | |
1341 | lbs_set_wep_keys(priv); | |
1342 | priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; | |
1343 | lbs_set_mac_control(priv); | |
1344 | /* No RSN mode for WEP */ | |
1345 | lbs_enable_rsn(priv, 0); | |
1346 | break; | |
1347 | case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ | |
1348 | /* | |
1349 | * If we don't have no WEP, no WPA and no WPA2, | |
1350 | * we remove all keys like in the WPA/WPA2 setup, | |
1351 | * we just don't set RSN. | |
1352 | * | |
1353 | * Therefore: fall-throught | |
1354 | */ | |
1355 | case WLAN_CIPHER_SUITE_TKIP: | |
1356 | case WLAN_CIPHER_SUITE_CCMP: | |
1357 | /* Remove WEP keys and WEP mode */ | |
1358 | lbs_remove_wep_keys(priv); | |
1359 | priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; | |
1360 | lbs_set_mac_control(priv); | |
1361 | ||
1362 | /* clear the WPA/WPA2 keys */ | |
1363 | lbs_set_key_material(priv, | |
1364 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1365 | KEY_INFO_WPA_UNICAST, | |
1366 | NULL, 0); | |
1367 | lbs_set_key_material(priv, | |
1368 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1369 | KEY_INFO_WPA_MCAST, | |
1370 | NULL, 0); | |
1371 | /* RSN mode for WPA/WPA2 */ | |
1372 | lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); | |
1373 | break; | |
1374 | default: | |
1375 | lbs_pr_err("unsupported cipher group 0x%x\n", | |
1376 | sme->crypto.cipher_group); | |
1377 | ret = -ENOTSUPP; | |
1378 | goto done; | |
1379 | } | |
1380 | ||
1381 | lbs_set_authtype(priv, sme); | |
1382 | lbs_set_radio(priv, preamble, 1); | |
1383 | ||
1384 | /* Do the actual association */ | |
cc026819 | 1385 | ret = lbs_associate(priv, bss, sme); |
e86dc1ca KD |
1386 | |
1387 | done: | |
1388 | if (bss) | |
1389 | cfg80211_put_bss(bss); | |
1390 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1391 | return ret; | |
1392 | } | |
1393 | ||
e86dc1ca KD |
1394 | static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, |
1395 | u16 reason_code) | |
1396 | { | |
1397 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1398 | struct cmd_ds_802_11_deauthenticate cmd; | |
ff9fc791 | 1399 | |
e86dc1ca | 1400 | lbs_deb_enter_args(LBS_DEB_CFG80211, "reason_code %d", reason_code); |
ff9fc791 | 1401 | |
e86dc1ca KD |
1402 | /* store for lbs_cfg_ret_disconnect() */ |
1403 | priv->disassoc_reason = reason_code; | |
1404 | ||
1405 | memset(&cmd, 0, sizeof(cmd)); | |
1406 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1407 | /* Mildly ugly to use a locally store my own BSSID ... */ | |
1408 | memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); | |
1409 | cmd.reasoncode = cpu_to_le16(reason_code); | |
1410 | ||
e4fe4eaf KD |
1411 | if (lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd)) |
1412 | return -EFAULT; | |
1413 | ||
1414 | cfg80211_disconnected(priv->dev, | |
1415 | priv->disassoc_reason, | |
1416 | NULL, 0, | |
1417 | GFP_KERNEL); | |
1418 | priv->connect_status = LBS_DISCONNECTED; | |
e86dc1ca KD |
1419 | |
1420 | return 0; | |
1421 | } | |
1422 | ||
1423 | ||
1424 | static int lbs_cfg_set_default_key(struct wiphy *wiphy, | |
1425 | struct net_device *netdev, | |
dbd2fd65 JB |
1426 | u8 key_index, bool unicast, |
1427 | bool multicast) | |
e86dc1ca KD |
1428 | { |
1429 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1430 | ||
1431 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1432 | ||
1433 | if (key_index != priv->wep_tx_key) { | |
1434 | lbs_deb_assoc("set_default_key: to %d\n", key_index); | |
1435 | priv->wep_tx_key = key_index; | |
1436 | lbs_set_wep_keys(priv); | |
1437 | } | |
1438 | ||
1439 | return 0; | |
1440 | } | |
1441 | ||
1442 | ||
1443 | static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 1444 | u8 idx, bool pairwise, const u8 *mac_addr, |
e86dc1ca KD |
1445 | struct key_params *params) |
1446 | { | |
1447 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1448 | u16 key_info; | |
1449 | u16 key_type; | |
1450 | int ret = 0; | |
1451 | ||
1452 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1453 | ||
1454 | lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", | |
1455 | params->cipher, mac_addr); | |
1456 | lbs_deb_assoc("add_key: key index %d, key len %d\n", | |
1457 | idx, params->key_len); | |
1458 | if (params->key_len) | |
1459 | lbs_deb_hex(LBS_DEB_CFG80211, "KEY", | |
1460 | params->key, params->key_len); | |
1461 | ||
1462 | lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); | |
1463 | if (params->seq_len) | |
1464 | lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", | |
1465 | params->seq, params->seq_len); | |
1466 | ||
1467 | switch (params->cipher) { | |
1468 | case WLAN_CIPHER_SUITE_WEP40: | |
1469 | case WLAN_CIPHER_SUITE_WEP104: | |
1470 | /* actually compare if something has changed ... */ | |
1471 | if ((priv->wep_key_len[idx] != params->key_len) || | |
1472 | memcmp(priv->wep_key[idx], | |
1473 | params->key, params->key_len) != 0) { | |
1474 | priv->wep_key_len[idx] = params->key_len; | |
1475 | memcpy(priv->wep_key[idx], | |
1476 | params->key, params->key_len); | |
1477 | lbs_set_wep_keys(priv); | |
1478 | } | |
1479 | break; | |
1480 | case WLAN_CIPHER_SUITE_TKIP: | |
1481 | case WLAN_CIPHER_SUITE_CCMP: | |
1482 | key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) | |
1483 | ? KEY_INFO_WPA_UNICAST | |
1484 | : KEY_INFO_WPA_MCAST); | |
1485 | key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) | |
1486 | ? KEY_TYPE_ID_TKIP | |
1487 | : KEY_TYPE_ID_AES; | |
1488 | lbs_set_key_material(priv, | |
1489 | key_type, | |
1490 | key_info, | |
1491 | params->key, params->key_len); | |
1492 | break; | |
1493 | default: | |
1494 | lbs_pr_err("unhandled cipher 0x%x\n", params->cipher); | |
1495 | ret = -ENOTSUPP; | |
1496 | break; | |
1497 | } | |
1498 | ||
1499 | return ret; | |
1500 | } | |
1501 | ||
1502 | ||
1503 | static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 1504 | u8 key_index, bool pairwise, const u8 *mac_addr) |
e86dc1ca KD |
1505 | { |
1506 | ||
1507 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1508 | ||
1509 | lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", | |
1510 | key_index, mac_addr); | |
1511 | ||
1512 | #ifdef TODO | |
1513 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1514 | /* | |
1515 | * I think can keep this a NO-OP, because: | |
1516 | ||
1517 | * - we clear all keys whenever we do lbs_cfg_connect() anyway | |
1518 | * - neither "iw" nor "wpa_supplicant" won't call this during | |
1519 | * an ongoing connection | |
1520 | * - TODO: but I have to check if this is still true when | |
1521 | * I set the AP to periodic re-keying | |
1522 | * - we've not kzallec() something when we've added a key at | |
1523 | * lbs_cfg_connect() or lbs_cfg_add_key(). | |
1524 | * | |
1525 | * This causes lbs_cfg_del_key() only called at disconnect time, | |
1526 | * where we'd just waste time deleting a key that is not going | |
1527 | * to be used anyway. | |
1528 | */ | |
1529 | if (key_index < 3 && priv->wep_key_len[key_index]) { | |
1530 | priv->wep_key_len[key_index] = 0; | |
1531 | lbs_set_wep_keys(priv); | |
1532 | } | |
1533 | #endif | |
1534 | ||
1535 | return 0; | |
1536 | } | |
1537 | ||
1538 | ||
e86dc1ca KD |
1539 | /*************************************************************************** |
1540 | * Get station | |
1541 | */ | |
1542 | ||
e86dc1ca KD |
1543 | static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, |
1544 | u8 *mac, struct station_info *sinfo) | |
1545 | { | |
1546 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1547 | s8 signal, noise; | |
1548 | int ret; | |
1549 | size_t i; | |
1550 | ||
1551 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1552 | ||
1553 | sinfo->filled |= STATION_INFO_TX_BYTES | | |
1554 | STATION_INFO_TX_PACKETS | | |
1555 | STATION_INFO_RX_BYTES | | |
1556 | STATION_INFO_RX_PACKETS; | |
1557 | sinfo->tx_bytes = priv->dev->stats.tx_bytes; | |
1558 | sinfo->tx_packets = priv->dev->stats.tx_packets; | |
1559 | sinfo->rx_bytes = priv->dev->stats.rx_bytes; | |
1560 | sinfo->rx_packets = priv->dev->stats.rx_packets; | |
1561 | ||
1562 | /* Get current RSSI */ | |
9fb7663d | 1563 | ret = lbs_get_rssi(priv, &signal, &noise); |
e86dc1ca KD |
1564 | if (ret == 0) { |
1565 | sinfo->signal = signal; | |
1566 | sinfo->filled |= STATION_INFO_SIGNAL; | |
1567 | } | |
1568 | ||
1569 | /* Convert priv->cur_rate from hw_value to NL80211 value */ | |
1570 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
1571 | if (priv->cur_rate == lbs_rates[i].hw_value) { | |
1572 | sinfo->txrate.legacy = lbs_rates[i].bitrate; | |
1573 | sinfo->filled |= STATION_INFO_TX_BITRATE; | |
1574 | break; | |
1575 | } | |
1576 | } | |
1577 | ||
1578 | return 0; | |
1579 | } | |
1580 | ||
1581 | ||
1582 | ||
1583 | ||
1584 | /*************************************************************************** | |
1585 | * "Site survey", here just current channel and noise level | |
1586 | */ | |
1587 | ||
1588 | static int lbs_get_survey(struct wiphy *wiphy, struct net_device *dev, | |
1589 | int idx, struct survey_info *survey) | |
1590 | { | |
1591 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1592 | s8 signal, noise; | |
1593 | int ret; | |
1594 | ||
1595 | if (idx != 0) | |
1596 | ret = -ENOENT; | |
1597 | ||
1598 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1599 | ||
1600 | survey->channel = ieee80211_get_channel(wiphy, | |
59eb21a6 BR |
1601 | ieee80211_channel_to_frequency(priv->channel, |
1602 | IEEE80211_BAND_2GHZ)); | |
e86dc1ca | 1603 | |
9fb7663d | 1604 | ret = lbs_get_rssi(priv, &signal, &noise); |
e86dc1ca KD |
1605 | if (ret == 0) { |
1606 | survey->filled = SURVEY_INFO_NOISE_DBM; | |
1607 | survey->noise = noise; | |
1608 | } | |
1609 | ||
1610 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1611 | return ret; | |
1612 | } | |
1613 | ||
1614 | ||
1615 | ||
1616 | ||
1617 | /*************************************************************************** | |
1618 | * Change interface | |
1619 | */ | |
1620 | ||
1621 | static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, | |
1622 | enum nl80211_iftype type, u32 *flags, | |
1623 | struct vif_params *params) | |
1624 | { | |
1625 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1626 | int ret = 0; | |
1627 | ||
1628 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1629 | ||
1630 | switch (type) { | |
1631 | case NL80211_IFTYPE_MONITOR: | |
a45b6f4f | 1632 | ret = lbs_set_monitor_mode(priv, 1); |
e86dc1ca KD |
1633 | break; |
1634 | case NL80211_IFTYPE_STATION: | |
1635 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1636 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1637 | if (!ret) |
1638 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 1); | |
1639 | break; | |
1640 | case NL80211_IFTYPE_ADHOC: | |
1641 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1642 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1643 | if (!ret) |
1644 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 2); | |
1645 | break; | |
1646 | default: | |
1647 | ret = -ENOTSUPP; | |
1648 | } | |
1649 | ||
1650 | if (!ret) | |
1651 | priv->wdev->iftype = type; | |
1652 | ||
1653 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1654 | return ret; | |
1655 | } | |
1656 | ||
1657 | ||
1658 | ||
1659 | /*************************************************************************** | |
1660 | * IBSS (Ad-Hoc) | |
1661 | */ | |
1662 | ||
1663 | /* The firmware needs the following bits masked out of the beacon-derived | |
1664 | * capability field when associating/joining to a BSS: | |
1665 | * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) | |
1666 | */ | |
1667 | #define CAPINFO_MASK (~(0xda00)) | |
1668 | ||
1669 | ||
1670 | static void lbs_join_post(struct lbs_private *priv, | |
1671 | struct cfg80211_ibss_params *params, | |
1672 | u8 *bssid, u16 capability) | |
1673 | { | |
1674 | u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ | |
1675 | 2 + 4 + /* basic rates */ | |
1676 | 2 + 1 + /* DS parameter */ | |
1677 | 2 + 2 + /* atim */ | |
1678 | 2 + 8]; /* extended rates */ | |
1679 | u8 *fake = fake_ie; | |
1680 | ||
1681 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1682 | ||
1683 | /* | |
1684 | * For cfg80211_inform_bss, we'll need a fake IE, as we can't get | |
1685 | * the real IE from the firmware. So we fabricate a fake IE based on | |
1686 | * what the firmware actually sends (sniffed with wireshark). | |
1687 | */ | |
1688 | /* Fake SSID IE */ | |
1689 | *fake++ = WLAN_EID_SSID; | |
1690 | *fake++ = params->ssid_len; | |
1691 | memcpy(fake, params->ssid, params->ssid_len); | |
1692 | fake += params->ssid_len; | |
1693 | /* Fake supported basic rates IE */ | |
1694 | *fake++ = WLAN_EID_SUPP_RATES; | |
1695 | *fake++ = 4; | |
1696 | *fake++ = 0x82; | |
1697 | *fake++ = 0x84; | |
1698 | *fake++ = 0x8b; | |
1699 | *fake++ = 0x96; | |
1700 | /* Fake DS channel IE */ | |
1701 | *fake++ = WLAN_EID_DS_PARAMS; | |
1702 | *fake++ = 1; | |
1703 | *fake++ = params->channel->hw_value; | |
1704 | /* Fake IBSS params IE */ | |
1705 | *fake++ = WLAN_EID_IBSS_PARAMS; | |
1706 | *fake++ = 2; | |
1707 | *fake++ = 0; /* ATIM=0 */ | |
1708 | *fake++ = 0; | |
1709 | /* Fake extended rates IE, TODO: don't add this for 802.11b only, | |
1710 | * but I don't know how this could be checked */ | |
1711 | *fake++ = WLAN_EID_EXT_SUPP_RATES; | |
1712 | *fake++ = 8; | |
1713 | *fake++ = 0x0c; | |
1714 | *fake++ = 0x12; | |
1715 | *fake++ = 0x18; | |
1716 | *fake++ = 0x24; | |
1717 | *fake++ = 0x30; | |
1718 | *fake++ = 0x48; | |
1719 | *fake++ = 0x60; | |
1720 | *fake++ = 0x6c; | |
1721 | lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); | |
1722 | ||
1723 | cfg80211_inform_bss(priv->wdev->wiphy, | |
1724 | params->channel, | |
1725 | bssid, | |
1726 | 0, | |
1727 | capability, | |
1728 | params->beacon_interval, | |
1729 | fake_ie, fake - fake_ie, | |
1730 | 0, GFP_KERNEL); | |
e4fe4eaf KD |
1731 | |
1732 | memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); | |
1733 | priv->wdev->ssid_len = params->ssid_len; | |
1734 | ||
e86dc1ca KD |
1735 | cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL); |
1736 | ||
1737 | /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ | |
1738 | priv->connect_status = LBS_CONNECTED; | |
1739 | netif_carrier_on(priv->dev); | |
1740 | if (!priv->tx_pending_len) | |
1741 | netif_wake_queue(priv->dev); | |
1742 | ||
1743 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1744 | } | |
1745 | ||
1746 | static int lbs_ibss_join_existing(struct lbs_private *priv, | |
1747 | struct cfg80211_ibss_params *params, | |
1748 | struct cfg80211_bss *bss) | |
1749 | { | |
1750 | const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
1751 | struct cmd_ds_802_11_ad_hoc_join cmd; | |
1752 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1753 | int ret = 0; | |
1754 | ||
1755 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1756 | ||
1757 | /* TODO: set preamble based on scan result */ | |
1758 | ret = lbs_set_radio(priv, preamble, 1); | |
1759 | if (ret) | |
1760 | goto out; | |
1761 | ||
1762 | /* | |
1763 | * Example CMD_802_11_AD_HOC_JOIN command: | |
1764 | * | |
1765 | * command 2c 00 CMD_802_11_AD_HOC_JOIN | |
1766 | * size 65 00 | |
1767 | * sequence xx xx | |
1768 | * result 00 00 | |
1769 | * bssid 02 27 27 97 2f 96 | |
1770 | * ssid 49 42 53 53 00 00 00 00 | |
1771 | * 00 00 00 00 00 00 00 00 | |
1772 | * 00 00 00 00 00 00 00 00 | |
1773 | * 00 00 00 00 00 00 00 00 | |
1774 | * type 02 CMD_BSS_TYPE_IBSS | |
1775 | * beacon period 64 00 | |
1776 | * dtim period 00 | |
1777 | * timestamp 00 00 00 00 00 00 00 00 | |
1778 | * localtime 00 00 00 00 00 00 00 00 | |
1779 | * IE DS 03 | |
1780 | * IE DS len 01 | |
1781 | * IE DS channel 01 | |
1782 | * reserveed 00 00 00 00 | |
1783 | * IE IBSS 06 | |
1784 | * IE IBSS len 02 | |
1785 | * IE IBSS atim 00 00 | |
1786 | * reserved 00 00 00 00 | |
1787 | * capability 02 00 | |
1788 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 | |
1789 | * fail timeout ff 00 | |
1790 | * probe delay 00 00 | |
1791 | */ | |
1792 | memset(&cmd, 0, sizeof(cmd)); | |
1793 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1794 | ||
1795 | memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); | |
1796 | memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); | |
1797 | cmd.bss.type = CMD_BSS_TYPE_IBSS; | |
1798 | cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1799 | cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; | |
1800 | cmd.bss.ds.header.len = 1; | |
1801 | cmd.bss.ds.channel = params->channel->hw_value; | |
1802 | cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1803 | cmd.bss.ibss.header.len = 2; | |
1804 | cmd.bss.ibss.atimwindow = 0; | |
1805 | cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); | |
1806 | ||
1807 | /* set rates to the intersection of our rates and the rates in the | |
1808 | bss */ | |
1809 | if (!rates_eid) { | |
1810 | lbs_add_rates(cmd.bss.rates); | |
1811 | } else { | |
1812 | int hw, i; | |
1813 | u8 rates_max = rates_eid[1]; | |
1814 | u8 *rates = cmd.bss.rates; | |
1815 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
1816 | u8 hw_rate = lbs_rates[hw].bitrate / 5; | |
1817 | for (i = 0; i < rates_max; i++) { | |
1818 | if (hw_rate == (rates_eid[i+2] & 0x7f)) { | |
1819 | u8 rate = rates_eid[i+2]; | |
1820 | if (rate == 0x02 || rate == 0x04 || | |
1821 | rate == 0x0b || rate == 0x16) | |
1822 | rate |= 0x80; | |
1823 | *rates++ = rate; | |
1824 | } | |
1825 | } | |
1826 | } | |
1827 | } | |
1828 | ||
1829 | /* Only v8 and below support setting this */ | |
1830 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { | |
1831 | cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); | |
1832 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1833 | } | |
1834 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); | |
1835 | if (ret) | |
1836 | goto out; | |
1837 | ||
1838 | /* | |
1839 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1840 | * | |
1841 | * response 2c 80 | |
1842 | * size 09 00 | |
1843 | * sequence xx xx | |
1844 | * result 00 00 | |
1845 | * reserved 00 | |
1846 | */ | |
1847 | lbs_join_post(priv, params, bss->bssid, bss->capability); | |
1848 | ||
1849 | out: | |
1850 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1851 | return ret; | |
1852 | } | |
1853 | ||
1854 | ||
1855 | ||
1856 | static int lbs_ibss_start_new(struct lbs_private *priv, | |
1857 | struct cfg80211_ibss_params *params) | |
1858 | { | |
1859 | struct cmd_ds_802_11_ad_hoc_start cmd; | |
1860 | struct cmd_ds_802_11_ad_hoc_result *resp = | |
1861 | (struct cmd_ds_802_11_ad_hoc_result *) &cmd; | |
1862 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1863 | int ret = 0; | |
1864 | u16 capability; | |
1865 | ||
1866 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1867 | ||
1868 | ret = lbs_set_radio(priv, preamble, 1); | |
1869 | if (ret) | |
1870 | goto out; | |
1871 | ||
1872 | /* | |
1873 | * Example CMD_802_11_AD_HOC_START command: | |
1874 | * | |
1875 | * command 2b 00 CMD_802_11_AD_HOC_START | |
1876 | * size b1 00 | |
1877 | * sequence xx xx | |
1878 | * result 00 00 | |
1879 | * ssid 54 45 53 54 00 00 00 00 | |
1880 | * 00 00 00 00 00 00 00 00 | |
1881 | * 00 00 00 00 00 00 00 00 | |
1882 | * 00 00 00 00 00 00 00 00 | |
1883 | * bss type 02 | |
1884 | * beacon period 64 00 | |
1885 | * dtim period 00 | |
1886 | * IE IBSS 06 | |
1887 | * IE IBSS len 02 | |
1888 | * IE IBSS atim 00 00 | |
1889 | * reserved 00 00 00 00 | |
1890 | * IE DS 03 | |
1891 | * IE DS len 01 | |
1892 | * IE DS channel 01 | |
1893 | * reserved 00 00 00 00 | |
1894 | * probe delay 00 00 | |
1895 | * capability 02 00 | |
1896 | * rates 82 84 8b 96 (basic rates with have bit 7 set) | |
1897 | * 0c 12 18 24 30 48 60 6c | |
1898 | * padding 100 bytes | |
1899 | */ | |
1900 | memset(&cmd, 0, sizeof(cmd)); | |
1901 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1902 | memcpy(cmd.ssid, params->ssid, params->ssid_len); | |
1903 | cmd.bsstype = CMD_BSS_TYPE_IBSS; | |
1904 | cmd.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1905 | cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1906 | cmd.ibss.header.len = 2; | |
1907 | cmd.ibss.atimwindow = 0; | |
1908 | cmd.ds.header.id = WLAN_EID_DS_PARAMS; | |
1909 | cmd.ds.header.len = 1; | |
1910 | cmd.ds.channel = params->channel->hw_value; | |
1911 | /* Only v8 and below support setting probe delay */ | |
1912 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) | |
1913 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1914 | /* TODO: mix in WLAN_CAPABILITY_PRIVACY */ | |
1915 | capability = WLAN_CAPABILITY_IBSS; | |
1916 | cmd.capability = cpu_to_le16(capability); | |
1917 | lbs_add_rates(cmd.rates); | |
1918 | ||
1919 | ||
1920 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); | |
1921 | if (ret) | |
1922 | goto out; | |
1923 | ||
1924 | /* | |
1925 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1926 | * | |
1927 | * response 2b 80 | |
1928 | * size 14 00 | |
1929 | * sequence xx xx | |
1930 | * result 00 00 | |
1931 | * reserved 00 | |
1932 | * bssid 02 2b 7b 0f 86 0e | |
1933 | */ | |
1934 | lbs_join_post(priv, params, resp->bssid, capability); | |
1935 | ||
1936 | out: | |
1937 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1938 | return ret; | |
1939 | } | |
1940 | ||
1941 | ||
1942 | static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, | |
1943 | struct cfg80211_ibss_params *params) | |
1944 | { | |
1945 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1946 | int ret = 0; | |
1947 | struct cfg80211_bss *bss; | |
1948 | DECLARE_SSID_BUF(ssid_buf); | |
1949 | ||
1950 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1951 | ||
1952 | if (!params->channel) { | |
1953 | ret = -ENOTSUPP; | |
1954 | goto out; | |
1955 | } | |
1956 | ||
1957 | ret = lbs_set_channel(priv, params->channel->hw_value); | |
1958 | if (ret) | |
ff9fc791 HS |
1959 | goto out; |
1960 | ||
e86dc1ca KD |
1961 | /* Search if someone is beaconing. This assumes that the |
1962 | * bss list is populated already */ | |
1963 | bss = cfg80211_get_bss(wiphy, params->channel, params->bssid, | |
1964 | params->ssid, params->ssid_len, | |
1965 | WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); | |
1966 | ||
1967 | if (bss) { | |
1968 | ret = lbs_ibss_join_existing(priv, params, bss); | |
1969 | cfg80211_put_bss(bss); | |
1970 | } else | |
1971 | ret = lbs_ibss_start_new(priv, params); | |
1972 | ||
ff9fc791 HS |
1973 | |
1974 | out: | |
1975 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1976 | return ret; | |
1977 | } | |
1978 | ||
1979 | ||
e86dc1ca KD |
1980 | static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
1981 | { | |
1982 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1983 | struct cmd_ds_802_11_ad_hoc_stop cmd; | |
1984 | int ret = 0; | |
1985 | ||
1986 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1987 | ||
1988 | memset(&cmd, 0, sizeof(cmd)); | |
1989 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1990 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); | |
1991 | ||
1992 | /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ | |
1993 | lbs_mac_event_disconnected(priv); | |
1994 | ||
1995 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1996 | return ret; | |
1997 | } | |
1998 | ||
ff9fc791 HS |
1999 | |
2000 | ||
e86dc1ca KD |
2001 | |
2002 | /*************************************************************************** | |
2003 | * Initialization | |
2004 | */ | |
2005 | ||
ff9fc791 HS |
2006 | static struct cfg80211_ops lbs_cfg80211_ops = { |
2007 | .set_channel = lbs_cfg_set_channel, | |
e86dc1ca KD |
2008 | .scan = lbs_cfg_scan, |
2009 | .connect = lbs_cfg_connect, | |
2010 | .disconnect = lbs_cfg_disconnect, | |
2011 | .add_key = lbs_cfg_add_key, | |
2012 | .del_key = lbs_cfg_del_key, | |
2013 | .set_default_key = lbs_cfg_set_default_key, | |
2014 | .get_station = lbs_cfg_get_station, | |
2015 | .dump_survey = lbs_get_survey, | |
2016 | .change_virtual_intf = lbs_change_intf, | |
2017 | .join_ibss = lbs_join_ibss, | |
2018 | .leave_ibss = lbs_leave_ibss, | |
ff9fc791 HS |
2019 | }; |
2020 | ||
2021 | ||
2022 | /* | |
2023 | * At this time lbs_private *priv doesn't even exist, so we just allocate | |
2024 | * memory and don't initialize the wiphy further. This is postponed until we | |
2025 | * can talk to the firmware and happens at registration time in | |
2026 | * lbs_cfg_wiphy_register(). | |
2027 | */ | |
2028 | struct wireless_dev *lbs_cfg_alloc(struct device *dev) | |
2029 | { | |
2030 | int ret = 0; | |
2031 | struct wireless_dev *wdev; | |
2032 | ||
2033 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2034 | ||
2035 | wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); | |
2036 | if (!wdev) { | |
2037 | dev_err(dev, "cannot allocate wireless device\n"); | |
2038 | return ERR_PTR(-ENOMEM); | |
2039 | } | |
2040 | ||
2041 | wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); | |
2042 | if (!wdev->wiphy) { | |
2043 | dev_err(dev, "cannot allocate wiphy\n"); | |
2044 | ret = -ENOMEM; | |
2045 | goto err_wiphy_new; | |
2046 | } | |
2047 | ||
2048 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2049 | return wdev; | |
2050 | ||
2051 | err_wiphy_new: | |
2052 | kfree(wdev); | |
2053 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
2054 | return ERR_PTR(ret); | |
2055 | } | |
2056 | ||
2057 | ||
e86dc1ca KD |
2058 | static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) |
2059 | { | |
2060 | struct region_code_mapping { | |
2061 | const char *cn; | |
2062 | int code; | |
2063 | }; | |
2064 | ||
2065 | /* Section 5.17.2 */ | |
482e039f | 2066 | static const struct region_code_mapping regmap[] = { |
e86dc1ca KD |
2067 | {"US ", 0x10}, /* US FCC */ |
2068 | {"CA ", 0x20}, /* Canada */ | |
2069 | {"EU ", 0x30}, /* ETSI */ | |
2070 | {"ES ", 0x31}, /* Spain */ | |
2071 | {"FR ", 0x32}, /* France */ | |
2072 | {"JP ", 0x40}, /* Japan */ | |
2073 | }; | |
2074 | size_t i; | |
2075 | ||
2076 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2077 | ||
2078 | for (i = 0; i < ARRAY_SIZE(regmap); i++) | |
2079 | if (regmap[i].code == priv->regioncode) { | |
2080 | regulatory_hint(priv->wdev->wiphy, regmap[i].cn); | |
2081 | break; | |
2082 | } | |
2083 | ||
2084 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2085 | } | |
2086 | ||
2087 | ||
ff9fc791 HS |
2088 | /* |
2089 | * This function get's called after lbs_setup_firmware() determined the | |
2090 | * firmware capabities. So we can setup the wiphy according to our | |
2091 | * hardware/firmware. | |
2092 | */ | |
2093 | int lbs_cfg_register(struct lbs_private *priv) | |
2094 | { | |
2095 | struct wireless_dev *wdev = priv->wdev; | |
2096 | int ret; | |
2097 | ||
2098 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2099 | ||
2100 | wdev->wiphy->max_scan_ssids = 1; | |
2101 | wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
2102 | ||
e86dc1ca KD |
2103 | wdev->wiphy->interface_modes = |
2104 | BIT(NL80211_IFTYPE_STATION) | | |
2105 | BIT(NL80211_IFTYPE_ADHOC); | |
2106 | if (lbs_rtap_supported(priv)) | |
2107 | wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
ff9fc791 | 2108 | |
ff9fc791 HS |
2109 | wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz; |
2110 | ||
2111 | /* | |
2112 | * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have | |
2113 | * never seen a firmware without WPA | |
2114 | */ | |
2115 | wdev->wiphy->cipher_suites = cipher_suites; | |
2116 | wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); | |
1047d5ed | 2117 | wdev->wiphy->reg_notifier = lbs_reg_notifier; |
ff9fc791 HS |
2118 | |
2119 | ret = wiphy_register(wdev->wiphy); | |
2120 | if (ret < 0) | |
2121 | lbs_pr_err("cannot register wiphy device\n"); | |
2122 | ||
73714004 DM |
2123 | priv->wiphy_registered = true; |
2124 | ||
ff9fc791 HS |
2125 | ret = register_netdev(priv->dev); |
2126 | if (ret) | |
2127 | lbs_pr_err("cannot register network device\n"); | |
2128 | ||
e86dc1ca KD |
2129 | INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); |
2130 | ||
2131 | lbs_cfg_set_regulatory_hint(priv); | |
2132 | ||
ff9fc791 HS |
2133 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); |
2134 | return ret; | |
2135 | } | |
2136 | ||
1047d5ed KD |
2137 | int lbs_reg_notifier(struct wiphy *wiphy, |
2138 | struct regulatory_request *request) | |
2139 | { | |
cc4b9d39 DW |
2140 | struct lbs_private *priv = wiphy_priv(wiphy); |
2141 | int ret; | |
2142 | ||
1047d5ed KD |
2143 | lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " |
2144 | "callback for domain %c%c\n", request->alpha2[0], | |
2145 | request->alpha2[1]); | |
2146 | ||
cc4b9d39 | 2147 | ret = lbs_set_11d_domain_info(priv, request, wiphy->bands); |
1047d5ed KD |
2148 | |
2149 | lbs_deb_leave(LBS_DEB_CFG80211); | |
cc4b9d39 | 2150 | return ret; |
1047d5ed | 2151 | } |
ff9fc791 | 2152 | |
e86dc1ca KD |
2153 | void lbs_scan_deinit(struct lbs_private *priv) |
2154 | { | |
2155 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2156 | cancel_delayed_work_sync(&priv->scan_work); | |
2157 | } | |
2158 | ||
2159 | ||
ff9fc791 HS |
2160 | void lbs_cfg_free(struct lbs_private *priv) |
2161 | { | |
2162 | struct wireless_dev *wdev = priv->wdev; | |
2163 | ||
2164 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2165 | ||
2166 | if (!wdev) | |
2167 | return; | |
2168 | ||
73714004 | 2169 | if (priv->wiphy_registered) |
ff9fc791 | 2170 | wiphy_unregister(wdev->wiphy); |
73714004 DM |
2171 | |
2172 | if (wdev->wiphy) | |
ff9fc791 | 2173 | wiphy_free(wdev->wiphy); |
73714004 | 2174 | |
ff9fc791 HS |
2175 | kfree(wdev); |
2176 | } |