]>
Commit | Line | Data |
---|---|---|
ff9fc791 HS |
1 | /* |
2 | * Implement cfg80211 ("iw") support. | |
3 | * | |
4 | * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany | |
5 | * Holger Schurig <hs4233@mail.mn-solutions.de> | |
6 | * | |
7 | */ | |
8 | ||
5a0e3ad6 | 9 | #include <linux/slab.h> |
1047d5ed | 10 | #include <linux/ieee80211.h> |
ff9fc791 | 11 | #include <net/cfg80211.h> |
e86dc1ca | 12 | #include <asm/unaligned.h> |
ff9fc791 | 13 | |
e86dc1ca | 14 | #include "decl.h" |
ff9fc791 HS |
15 | #include "cfg.h" |
16 | #include "cmd.h" | |
17 | ||
18 | ||
19 | #define CHAN2G(_channel, _freq, _flags) { \ | |
20 | .band = IEEE80211_BAND_2GHZ, \ | |
21 | .center_freq = (_freq), \ | |
22 | .hw_value = (_channel), \ | |
23 | .flags = (_flags), \ | |
24 | .max_antenna_gain = 0, \ | |
25 | .max_power = 30, \ | |
26 | } | |
27 | ||
28 | static struct ieee80211_channel lbs_2ghz_channels[] = { | |
29 | CHAN2G(1, 2412, 0), | |
30 | CHAN2G(2, 2417, 0), | |
31 | CHAN2G(3, 2422, 0), | |
32 | CHAN2G(4, 2427, 0), | |
33 | CHAN2G(5, 2432, 0), | |
34 | CHAN2G(6, 2437, 0), | |
35 | CHAN2G(7, 2442, 0), | |
36 | CHAN2G(8, 2447, 0), | |
37 | CHAN2G(9, 2452, 0), | |
38 | CHAN2G(10, 2457, 0), | |
39 | CHAN2G(11, 2462, 0), | |
40 | CHAN2G(12, 2467, 0), | |
41 | CHAN2G(13, 2472, 0), | |
42 | CHAN2G(14, 2484, 0), | |
43 | }; | |
44 | ||
e86dc1ca KD |
45 | #define RATETAB_ENT(_rate, _hw_value, _flags) { \ |
46 | .bitrate = (_rate), \ | |
47 | .hw_value = (_hw_value), \ | |
48 | .flags = (_flags), \ | |
ff9fc791 HS |
49 | } |
50 | ||
51 | ||
e86dc1ca | 52 | /* Table 6 in section 3.2.1.1 */ |
ff9fc791 | 53 | static struct ieee80211_rate lbs_rates[] = { |
e86dc1ca KD |
54 | RATETAB_ENT(10, 0, 0), |
55 | RATETAB_ENT(20, 1, 0), | |
56 | RATETAB_ENT(55, 2, 0), | |
57 | RATETAB_ENT(110, 3, 0), | |
58 | RATETAB_ENT(60, 9, 0), | |
59 | RATETAB_ENT(90, 6, 0), | |
60 | RATETAB_ENT(120, 7, 0), | |
61 | RATETAB_ENT(180, 8, 0), | |
62 | RATETAB_ENT(240, 9, 0), | |
63 | RATETAB_ENT(360, 10, 0), | |
64 | RATETAB_ENT(480, 11, 0), | |
65 | RATETAB_ENT(540, 12, 0), | |
ff9fc791 HS |
66 | }; |
67 | ||
68 | static struct ieee80211_supported_band lbs_band_2ghz = { | |
69 | .channels = lbs_2ghz_channels, | |
70 | .n_channels = ARRAY_SIZE(lbs_2ghz_channels), | |
71 | .bitrates = lbs_rates, | |
72 | .n_bitrates = ARRAY_SIZE(lbs_rates), | |
73 | }; | |
74 | ||
75 | ||
76 | static const u32 cipher_suites[] = { | |
77 | WLAN_CIPHER_SUITE_WEP40, | |
78 | WLAN_CIPHER_SUITE_WEP104, | |
79 | WLAN_CIPHER_SUITE_TKIP, | |
80 | WLAN_CIPHER_SUITE_CCMP, | |
81 | }; | |
82 | ||
e86dc1ca KD |
83 | /* Time to stay on the channel */ |
84 | #define LBS_DWELL_PASSIVE 100 | |
85 | #define LBS_DWELL_ACTIVE 40 | |
ff9fc791 HS |
86 | |
87 | ||
e86dc1ca KD |
88 | /*************************************************************************** |
89 | * Misc utility functions | |
90 | * | |
91 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
92 | * same structure: type, length, data*. The only difference: for IEs, the | |
93 | * type and length are u8, but for TLVs they're __le16. | |
94 | */ | |
95 | ||
96 | /* | |
97 | * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 | |
98 | * in the firmware spec | |
99 | */ | |
100 | static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) | |
101 | { | |
102 | int ret = -ENOTSUPP; | |
103 | ||
104 | switch (auth_type) { | |
105 | case NL80211_AUTHTYPE_OPEN_SYSTEM: | |
106 | case NL80211_AUTHTYPE_SHARED_KEY: | |
107 | ret = auth_type; | |
108 | break; | |
109 | case NL80211_AUTHTYPE_AUTOMATIC: | |
110 | ret = NL80211_AUTHTYPE_OPEN_SYSTEM; | |
111 | break; | |
112 | case NL80211_AUTHTYPE_NETWORK_EAP: | |
113 | ret = 0x80; | |
114 | break; | |
115 | default: | |
116 | /* silence compiler */ | |
117 | break; | |
118 | } | |
119 | return ret; | |
120 | } | |
121 | ||
122 | ||
123 | /* Various firmware commands need the list of supported rates, but with | |
124 | the hight-bit set for basic rates */ | |
125 | static int lbs_add_rates(u8 *rates) | |
126 | { | |
127 | size_t i; | |
128 | ||
129 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
130 | u8 rate = lbs_rates[i].bitrate / 5; | |
131 | if (rate == 0x02 || rate == 0x04 || | |
132 | rate == 0x0b || rate == 0x16) | |
133 | rate |= 0x80; | |
134 | rates[i] = rate; | |
135 | } | |
136 | return ARRAY_SIZE(lbs_rates); | |
137 | } | |
138 | ||
139 | ||
140 | /*************************************************************************** | |
141 | * TLV utility functions | |
142 | * | |
143 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
144 | * same structure: type, length, data*. The only difference: for IEs, the | |
145 | * type and length are u8, but for TLVs they're __le16. | |
146 | */ | |
147 | ||
148 | ||
149 | /* | |
150 | * Add ssid TLV | |
151 | */ | |
152 | #define LBS_MAX_SSID_TLV_SIZE \ | |
153 | (sizeof(struct mrvl_ie_header) \ | |
154 | + IEEE80211_MAX_SSID_LEN) | |
155 | ||
156 | static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) | |
157 | { | |
158 | struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; | |
159 | ||
160 | /* | |
161 | * TLV-ID SSID 00 00 | |
162 | * length 06 00 | |
163 | * ssid 4d 4e 54 45 53 54 | |
164 | */ | |
165 | ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); | |
166 | ssid_tlv->header.len = cpu_to_le16(ssid_len); | |
167 | memcpy(ssid_tlv->ssid, ssid, ssid_len); | |
168 | return sizeof(ssid_tlv->header) + ssid_len; | |
169 | } | |
170 | ||
171 | ||
172 | /* | |
173 | * Add channel list TLV (section 8.4.2) | |
174 | * | |
175 | * Actual channel data comes from priv->wdev->wiphy->channels. | |
176 | */ | |
177 | #define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
178 | (sizeof(struct mrvl_ie_header) \ | |
179 | + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) | |
180 | ||
181 | static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, | |
182 | int last_channel, int active_scan) | |
183 | { | |
184 | int chanscanparamsize = sizeof(struct chanscanparamset) * | |
185 | (last_channel - priv->scan_channel); | |
186 | ||
187 | struct mrvl_ie_header *header = (void *) tlv; | |
188 | ||
189 | /* | |
190 | * TLV-ID CHANLIST 01 01 | |
191 | * length 0e 00 | |
192 | * channel 00 01 00 00 00 64 00 | |
193 | * radio type 00 | |
194 | * channel 01 | |
195 | * scan type 00 | |
196 | * min scan time 00 00 | |
197 | * max scan time 64 00 | |
198 | * channel 2 00 02 00 00 00 64 00 | |
199 | * | |
200 | */ | |
201 | ||
202 | header->type = cpu_to_le16(TLV_TYPE_CHANLIST); | |
203 | header->len = cpu_to_le16(chanscanparamsize); | |
204 | tlv += sizeof(struct mrvl_ie_header); | |
205 | ||
206 | /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, | |
207 | last_channel); */ | |
208 | memset(tlv, 0, chanscanparamsize); | |
209 | ||
210 | while (priv->scan_channel < last_channel) { | |
211 | struct chanscanparamset *param = (void *) tlv; | |
212 | ||
213 | param->radiotype = CMD_SCAN_RADIO_TYPE_BG; | |
214 | param->channumber = | |
215 | priv->scan_req->channels[priv->scan_channel]->hw_value; | |
216 | if (active_scan) { | |
217 | param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); | |
218 | } else { | |
219 | param->chanscanmode.passivescan = 1; | |
220 | param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); | |
221 | } | |
222 | tlv += sizeof(struct chanscanparamset); | |
223 | priv->scan_channel++; | |
224 | } | |
225 | return sizeof(struct mrvl_ie_header) + chanscanparamsize; | |
226 | } | |
227 | ||
228 | ||
229 | /* | |
230 | * Add rates TLV | |
231 | * | |
232 | * The rates are in lbs_bg_rates[], but for the 802.11b | |
233 | * rates the high bit is set. We add this TLV only because | |
234 | * there's a firmware which otherwise doesn't report all | |
235 | * APs in range. | |
236 | */ | |
237 | #define LBS_MAX_RATES_TLV_SIZE \ | |
238 | (sizeof(struct mrvl_ie_header) \ | |
239 | + (ARRAY_SIZE(lbs_rates))) | |
240 | ||
241 | /* Adds a TLV with all rates the hardware supports */ | |
242 | static int lbs_add_supported_rates_tlv(u8 *tlv) | |
243 | { | |
244 | size_t i; | |
245 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
246 | ||
247 | /* | |
248 | * TLV-ID RATES 01 00 | |
249 | * length 0e 00 | |
250 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c | |
251 | */ | |
252 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
253 | tlv += sizeof(rate_tlv->header); | |
254 | i = lbs_add_rates(tlv); | |
255 | tlv += i; | |
256 | rate_tlv->header.len = cpu_to_le16(i); | |
257 | return sizeof(rate_tlv->header) + i; | |
258 | } | |
259 | ||
260 | ||
261 | /* | |
262 | * Adds a TLV with all rates the hardware *and* BSS supports. | |
263 | */ | |
264 | static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) | |
265 | { | |
266 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
267 | const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
268 | int n; | |
269 | ||
270 | /* | |
271 | * 01 00 TLV_TYPE_RATES | |
272 | * 04 00 len | |
273 | * 82 84 8b 96 rates | |
274 | */ | |
275 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
276 | tlv += sizeof(rate_tlv->header); | |
277 | ||
278 | if (!rates_eid) { | |
279 | /* Fallback: add basic 802.11b rates */ | |
280 | *tlv++ = 0x82; | |
281 | *tlv++ = 0x84; | |
282 | *tlv++ = 0x8b; | |
283 | *tlv++ = 0x96; | |
284 | n = 4; | |
285 | } else { | |
286 | int hw, ap; | |
287 | u8 ap_max = rates_eid[1]; | |
288 | n = 0; | |
289 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
290 | u8 hw_rate = lbs_rates[hw].bitrate / 5; | |
291 | for (ap = 0; ap < ap_max; ap++) { | |
292 | if (hw_rate == (rates_eid[ap+2] & 0x7f)) { | |
293 | *tlv++ = rates_eid[ap+2]; | |
294 | n++; | |
295 | } | |
296 | } | |
297 | } | |
298 | } | |
299 | ||
300 | rate_tlv->header.len = cpu_to_le16(n); | |
301 | return sizeof(rate_tlv->header) + n; | |
302 | } | |
303 | ||
304 | ||
305 | /* | |
306 | * Add auth type TLV. | |
307 | * | |
308 | * This is only needed for newer firmware (V9 and up). | |
309 | */ | |
310 | #define LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
311 | sizeof(struct mrvl_ie_auth_type) | |
312 | ||
313 | static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) | |
314 | { | |
315 | struct mrvl_ie_auth_type *auth = (void *) tlv; | |
316 | ||
317 | /* | |
318 | * 1f 01 TLV_TYPE_AUTH_TYPE | |
319 | * 01 00 len | |
320 | * 01 auth type | |
321 | */ | |
322 | auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); | |
323 | auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); | |
324 | auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); | |
325 | return sizeof(*auth); | |
326 | } | |
327 | ||
328 | ||
329 | /* | |
330 | * Add channel (phy ds) TLV | |
331 | */ | |
332 | #define LBS_MAX_CHANNEL_TLV_SIZE \ | |
333 | sizeof(struct mrvl_ie_header) | |
334 | ||
335 | static int lbs_add_channel_tlv(u8 *tlv, u8 channel) | |
336 | { | |
337 | struct mrvl_ie_ds_param_set *ds = (void *) tlv; | |
338 | ||
339 | /* | |
340 | * 03 00 TLV_TYPE_PHY_DS | |
341 | * 01 00 len | |
342 | * 06 channel | |
343 | */ | |
344 | ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); | |
345 | ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); | |
346 | ds->channel = channel; | |
347 | return sizeof(*ds); | |
348 | } | |
349 | ||
350 | ||
351 | /* | |
352 | * Add (empty) CF param TLV of the form: | |
353 | */ | |
354 | #define LBS_MAX_CF_PARAM_TLV_SIZE \ | |
355 | sizeof(struct mrvl_ie_header) | |
356 | ||
357 | static int lbs_add_cf_param_tlv(u8 *tlv) | |
358 | { | |
359 | struct mrvl_ie_cf_param_set *cf = (void *)tlv; | |
360 | ||
361 | /* | |
362 | * 04 00 TLV_TYPE_CF | |
363 | * 06 00 len | |
364 | * 00 cfpcnt | |
365 | * 00 cfpperiod | |
366 | * 00 00 cfpmaxduration | |
367 | * 00 00 cfpdurationremaining | |
368 | */ | |
369 | cf->header.type = cpu_to_le16(TLV_TYPE_CF); | |
370 | cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); | |
371 | return sizeof(*cf); | |
372 | } | |
373 | ||
374 | /* | |
375 | * Add WPA TLV | |
376 | */ | |
377 | #define LBS_MAX_WPA_TLV_SIZE \ | |
378 | (sizeof(struct mrvl_ie_header) \ | |
379 | + 128 /* TODO: I guessed the size */) | |
380 | ||
381 | static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) | |
382 | { | |
383 | size_t tlv_len; | |
384 | ||
385 | /* | |
386 | * We need just convert an IE to an TLV. IEs use u8 for the header, | |
387 | * u8 type | |
388 | * u8 len | |
389 | * u8[] data | |
390 | * but TLVs use __le16 instead: | |
391 | * __le16 type | |
392 | * __le16 len | |
393 | * u8[] data | |
394 | */ | |
395 | *tlv++ = *ie++; | |
396 | *tlv++ = 0; | |
397 | tlv_len = *tlv++ = *ie++; | |
398 | *tlv++ = 0; | |
399 | while (tlv_len--) | |
400 | *tlv++ = *ie++; | |
401 | /* the TLV is two bytes larger than the IE */ | |
402 | return ie_len + 2; | |
403 | } | |
404 | ||
405 | /*************************************************************************** | |
406 | * Set Channel | |
407 | */ | |
408 | ||
ff9fc791 | 409 | static int lbs_cfg_set_channel(struct wiphy *wiphy, |
f444de05 | 410 | struct net_device *netdev, |
e86dc1ca | 411 | struct ieee80211_channel *channel, |
ff9fc791 HS |
412 | enum nl80211_channel_type channel_type) |
413 | { | |
414 | struct lbs_private *priv = wiphy_priv(wiphy); | |
e86dc1ca KD |
415 | int ret = -ENOTSUPP; |
416 | ||
417 | lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", | |
418 | channel->center_freq, channel_type); | |
419 | ||
420 | if (channel_type != NL80211_CHAN_NO_HT) | |
421 | goto out; | |
422 | ||
423 | ret = lbs_set_channel(priv, channel->hw_value); | |
424 | ||
425 | out: | |
426 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
427 | return ret; | |
428 | } | |
429 | ||
430 | ||
431 | ||
432 | /*************************************************************************** | |
433 | * Scanning | |
434 | */ | |
435 | ||
436 | /* | |
437 | * When scanning, the firmware doesn't send a nul packet with the power-safe | |
438 | * bit to the AP. So we cannot stay away from our current channel too long, | |
439 | * otherwise we loose data. So take a "nap" while scanning every other | |
440 | * while. | |
441 | */ | |
442 | #define LBS_SCAN_BEFORE_NAP 4 | |
443 | ||
444 | ||
445 | /* | |
446 | * When the firmware reports back a scan-result, it gives us an "u8 rssi", | |
447 | * which isn't really an RSSI, as it becomes larger when moving away from | |
448 | * the AP. Anyway, we need to convert that into mBm. | |
449 | */ | |
450 | #define LBS_SCAN_RSSI_TO_MBM(rssi) \ | |
451 | ((-(int)rssi + 3)*100) | |
452 | ||
453 | static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, | |
454 | struct cmd_header *resp) | |
455 | { | |
456 | struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; | |
457 | int bsssize; | |
458 | const u8 *pos; | |
459 | u16 nr_sets; | |
460 | const u8 *tsfdesc; | |
461 | int tsfsize; | |
462 | int i; | |
463 | int ret = -EILSEQ; | |
464 | ||
465 | lbs_deb_enter(LBS_DEB_CFG80211); | |
466 | ||
467 | bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); | |
468 | nr_sets = le16_to_cpu(resp->size); | |
469 | ||
470 | /* | |
471 | * The general layout of the scan response is described in chapter | |
472 | * 5.7.1. Basically we have a common part, then any number of BSS | |
473 | * descriptor sections. Finally we have section with the same number | |
474 | * of TSFs. | |
475 | * | |
476 | * cmd_ds_802_11_scan_rsp | |
477 | * cmd_header | |
478 | * pos_size | |
479 | * nr_sets | |
480 | * bssdesc 1 | |
481 | * bssid | |
482 | * rssi | |
483 | * timestamp | |
484 | * intvl | |
485 | * capa | |
486 | * IEs | |
487 | * bssdesc 2 | |
488 | * bssdesc n | |
489 | * MrvlIEtypes_TsfFimestamp_t | |
490 | * TSF for BSS 1 | |
491 | * TSF for BSS 2 | |
492 | * TSF for BSS n | |
493 | */ | |
494 | ||
495 | pos = scanresp->bssdesc_and_tlvbuffer; | |
496 | ||
497 | tsfdesc = pos + bsssize; | |
498 | tsfsize = 4 + 8 * scanresp->nr_sets; | |
499 | ||
500 | /* Validity check: we expect a Marvell-Local TLV */ | |
501 | i = get_unaligned_le16(tsfdesc); | |
502 | tsfdesc += 2; | |
503 | if (i != TLV_TYPE_TSFTIMESTAMP) | |
504 | goto done; | |
505 | /* Validity check: the TLV holds TSF values with 8 bytes each, so | |
506 | * the size in the TLV must match the nr_sets value */ | |
507 | i = get_unaligned_le16(tsfdesc); | |
508 | tsfdesc += 2; | |
509 | if (i / 8 != scanresp->nr_sets) | |
510 | goto done; | |
511 | ||
512 | for (i = 0; i < scanresp->nr_sets; i++) { | |
513 | const u8 *bssid; | |
514 | const u8 *ie; | |
515 | int left; | |
516 | int ielen; | |
517 | int rssi; | |
518 | u16 intvl; | |
519 | u16 capa; | |
520 | int chan_no = -1; | |
521 | const u8 *ssid = NULL; | |
522 | u8 ssid_len = 0; | |
523 | DECLARE_SSID_BUF(ssid_buf); | |
524 | ||
525 | int len = get_unaligned_le16(pos); | |
526 | pos += 2; | |
527 | ||
528 | /* BSSID */ | |
529 | bssid = pos; | |
530 | pos += ETH_ALEN; | |
531 | /* RSSI */ | |
532 | rssi = *pos++; | |
533 | /* Packet time stamp */ | |
534 | pos += 8; | |
535 | /* Beacon interval */ | |
536 | intvl = get_unaligned_le16(pos); | |
537 | pos += 2; | |
538 | /* Capabilities */ | |
539 | capa = get_unaligned_le16(pos); | |
540 | pos += 2; | |
541 | ||
542 | /* To find out the channel, we must parse the IEs */ | |
543 | ie = pos; | |
544 | /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon | |
545 | interval, capabilities */ | |
546 | ielen = left = len - (6 + 1 + 8 + 2 + 2); | |
547 | while (left >= 2) { | |
548 | u8 id, elen; | |
549 | id = *pos++; | |
550 | elen = *pos++; | |
551 | left -= 2; | |
552 | if (elen > left || elen == 0) | |
553 | goto done; | |
554 | if (id == WLAN_EID_DS_PARAMS) | |
555 | chan_no = *pos; | |
556 | if (id == WLAN_EID_SSID) { | |
557 | ssid = pos; | |
558 | ssid_len = elen; | |
559 | } | |
560 | left -= elen; | |
561 | pos += elen; | |
562 | } | |
563 | ||
564 | /* No channel, no luck */ | |
565 | if (chan_no != -1) { | |
566 | struct wiphy *wiphy = priv->wdev->wiphy; | |
567 | int freq = ieee80211_channel_to_frequency(chan_no); | |
568 | struct ieee80211_channel *channel = | |
569 | ieee80211_get_channel(wiphy, freq); | |
570 | ||
571 | lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %s, " | |
572 | "%d dBm\n", | |
573 | bssid, capa, chan_no, | |
574 | print_ssid(ssid_buf, ssid, ssid_len), | |
575 | LBS_SCAN_RSSI_TO_MBM(rssi)/100); | |
576 | ||
577 | if (channel || | |
578 | !(channel->flags & IEEE80211_CHAN_DISABLED)) | |
579 | cfg80211_inform_bss(wiphy, channel, | |
580 | bssid, le64_to_cpu(*(__le64 *)tsfdesc), | |
581 | capa, intvl, ie, ielen, | |
582 | LBS_SCAN_RSSI_TO_MBM(rssi), | |
583 | GFP_KERNEL); | |
584 | } | |
585 | tsfdesc += 8; | |
586 | } | |
587 | ret = 0; | |
588 | ||
589 | done: | |
590 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | |
591 | return ret; | |
592 | } | |
593 | ||
594 | ||
595 | /* | |
596 | * Our scan command contains a TLV, consting of a SSID TLV, a channel list | |
597 | * TLV and a rates TLV. Determine the maximum size of them: | |
598 | */ | |
599 | #define LBS_SCAN_MAX_CMD_SIZE \ | |
600 | (sizeof(struct cmd_ds_802_11_scan) \ | |
601 | + LBS_MAX_SSID_TLV_SIZE \ | |
602 | + LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
603 | + LBS_MAX_RATES_TLV_SIZE) | |
604 | ||
605 | /* | |
606 | * Assumes priv->scan_req is initialized and valid | |
607 | * Assumes priv->scan_channel is initialized | |
608 | */ | |
609 | static void lbs_scan_worker(struct work_struct *work) | |
610 | { | |
611 | struct lbs_private *priv = | |
612 | container_of(work, struct lbs_private, scan_work.work); | |
613 | struct cmd_ds_802_11_scan *scan_cmd; | |
614 | u8 *tlv; /* pointer into our current, growing TLV storage area */ | |
615 | int last_channel; | |
616 | int running, carrier; | |
617 | ||
618 | lbs_deb_enter(LBS_DEB_SCAN); | |
619 | ||
620 | scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); | |
621 | if (scan_cmd == NULL) | |
622 | goto out_no_scan_cmd; | |
623 | ||
624 | /* prepare fixed part of scan command */ | |
625 | scan_cmd->bsstype = CMD_BSS_TYPE_ANY; | |
626 | ||
627 | /* stop network while we're away from our main channel */ | |
628 | running = !netif_queue_stopped(priv->dev); | |
629 | carrier = netif_carrier_ok(priv->dev); | |
630 | if (running) | |
631 | netif_stop_queue(priv->dev); | |
632 | if (carrier) | |
633 | netif_carrier_off(priv->dev); | |
634 | ||
635 | /* prepare fixed part of scan command */ | |
636 | tlv = scan_cmd->tlvbuffer; | |
637 | ||
638 | /* add SSID TLV */ | |
639 | if (priv->scan_req->n_ssids) | |
640 | tlv += lbs_add_ssid_tlv(tlv, | |
641 | priv->scan_req->ssids[0].ssid, | |
642 | priv->scan_req->ssids[0].ssid_len); | |
643 | ||
644 | /* add channel TLVs */ | |
645 | last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; | |
646 | if (last_channel > priv->scan_req->n_channels) | |
647 | last_channel = priv->scan_req->n_channels; | |
648 | tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, | |
649 | priv->scan_req->n_ssids); | |
650 | ||
651 | /* add rates TLV */ | |
652 | tlv += lbs_add_supported_rates_tlv(tlv); | |
653 | ||
654 | if (priv->scan_channel < priv->scan_req->n_channels) { | |
655 | cancel_delayed_work(&priv->scan_work); | |
656 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
657 | msecs_to_jiffies(300)); | |
658 | } | |
659 | ||
660 | /* This is the final data we are about to send */ | |
661 | scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); | |
662 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, | |
663 | sizeof(*scan_cmd)); | |
664 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, | |
665 | tlv - scan_cmd->tlvbuffer); | |
666 | ||
667 | __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, | |
668 | le16_to_cpu(scan_cmd->hdr.size), | |
669 | lbs_ret_scan, 0); | |
670 | ||
671 | if (priv->scan_channel >= priv->scan_req->n_channels) { | |
672 | /* Mark scan done */ | |
673 | cfg80211_scan_done(priv->scan_req, false); | |
674 | priv->scan_req = NULL; | |
675 | } | |
676 | ||
677 | /* Restart network */ | |
678 | if (carrier) | |
679 | netif_carrier_on(priv->dev); | |
680 | if (running && !priv->tx_pending_len) | |
681 | netif_wake_queue(priv->dev); | |
682 | ||
683 | kfree(scan_cmd); | |
684 | ||
685 | out_no_scan_cmd: | |
686 | lbs_deb_leave(LBS_DEB_SCAN); | |
687 | } | |
688 | ||
689 | ||
690 | static int lbs_cfg_scan(struct wiphy *wiphy, | |
691 | struct net_device *dev, | |
692 | struct cfg80211_scan_request *request) | |
693 | { | |
694 | struct lbs_private *priv = wiphy_priv(wiphy); | |
695 | int ret = 0; | |
696 | ||
697 | lbs_deb_enter(LBS_DEB_CFG80211); | |
698 | ||
699 | if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { | |
700 | /* old scan request not yet processed */ | |
701 | ret = -EAGAIN; | |
702 | goto out; | |
703 | } | |
704 | ||
705 | lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", | |
706 | request->n_ssids, request->n_channels, request->ie_len); | |
707 | ||
708 | priv->scan_channel = 0; | |
709 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
710 | msecs_to_jiffies(50)); | |
711 | ||
712 | if (priv->surpriseremoved) | |
713 | ret = -EIO; | |
714 | ||
715 | priv->scan_req = request; | |
716 | ||
717 | out: | |
718 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
719 | return ret; | |
720 | } | |
721 | ||
722 | ||
723 | ||
724 | ||
725 | /*************************************************************************** | |
726 | * Events | |
727 | */ | |
728 | ||
729 | void lbs_send_disconnect_notification(struct lbs_private *priv) | |
730 | { | |
731 | lbs_deb_enter(LBS_DEB_CFG80211); | |
732 | ||
733 | cfg80211_disconnected(priv->dev, | |
734 | 0, | |
735 | NULL, 0, | |
736 | GFP_KERNEL); | |
737 | ||
738 | lbs_deb_leave(LBS_DEB_CFG80211); | |
739 | } | |
740 | ||
741 | void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) | |
742 | { | |
743 | lbs_deb_enter(LBS_DEB_CFG80211); | |
744 | ||
745 | cfg80211_michael_mic_failure(priv->dev, | |
746 | priv->assoc_bss, | |
747 | event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? | |
748 | NL80211_KEYTYPE_GROUP : | |
749 | NL80211_KEYTYPE_PAIRWISE, | |
750 | -1, | |
751 | NULL, | |
752 | GFP_KERNEL); | |
753 | ||
754 | lbs_deb_leave(LBS_DEB_CFG80211); | |
755 | } | |
756 | ||
757 | ||
758 | ||
759 | ||
760 | /*************************************************************************** | |
761 | * Connect/disconnect | |
762 | */ | |
763 | ||
764 | ||
765 | /* | |
766 | * This removes all WEP keys | |
767 | */ | |
768 | static int lbs_remove_wep_keys(struct lbs_private *priv) | |
769 | { | |
770 | struct cmd_ds_802_11_set_wep cmd; | |
771 | int ret; | |
772 | ||
773 | lbs_deb_enter(LBS_DEB_CFG80211); | |
774 | ||
775 | memset(&cmd, 0, sizeof(cmd)); | |
776 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
777 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
778 | cmd.action = cpu_to_le16(CMD_ACT_REMOVE); | |
779 | ||
780 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
781 | ||
782 | lbs_deb_leave(LBS_DEB_CFG80211); | |
783 | return ret; | |
784 | } | |
785 | ||
786 | /* | |
787 | * Set WEP keys | |
788 | */ | |
789 | static int lbs_set_wep_keys(struct lbs_private *priv) | |
790 | { | |
791 | struct cmd_ds_802_11_set_wep cmd; | |
792 | int i; | |
793 | int ret; | |
794 | ||
795 | lbs_deb_enter(LBS_DEB_CFG80211); | |
796 | ||
797 | /* | |
798 | * command 13 00 | |
799 | * size 50 00 | |
800 | * sequence xx xx | |
801 | * result 00 00 | |
802 | * action 02 00 ACT_ADD | |
803 | * transmit key 00 00 | |
804 | * type for key 1 01 WEP40 | |
805 | * type for key 2 00 | |
806 | * type for key 3 00 | |
807 | * type for key 4 00 | |
808 | * key 1 39 39 39 39 39 00 00 00 | |
809 | * 00 00 00 00 00 00 00 00 | |
810 | * key 2 00 00 00 00 00 00 00 00 | |
811 | * 00 00 00 00 00 00 00 00 | |
812 | * key 3 00 00 00 00 00 00 00 00 | |
813 | * 00 00 00 00 00 00 00 00 | |
814 | * key 4 00 00 00 00 00 00 00 00 | |
815 | */ | |
816 | if (priv->wep_key_len[0] || priv->wep_key_len[1] || | |
817 | priv->wep_key_len[2] || priv->wep_key_len[3]) { | |
818 | /* Only set wep keys if we have at least one of them */ | |
819 | memset(&cmd, 0, sizeof(cmd)); | |
820 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
821 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
822 | cmd.action = cpu_to_le16(CMD_ACT_ADD); | |
823 | ||
824 | for (i = 0; i < 4; i++) { | |
825 | switch (priv->wep_key_len[i]) { | |
826 | case WLAN_KEY_LEN_WEP40: | |
827 | cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; | |
828 | break; | |
829 | case WLAN_KEY_LEN_WEP104: | |
830 | cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; | |
831 | break; | |
832 | default: | |
833 | cmd.keytype[i] = 0; | |
834 | break; | |
835 | } | |
836 | memcpy(cmd.keymaterial[i], priv->wep_key[i], | |
837 | priv->wep_key_len[i]); | |
838 | } | |
839 | ||
840 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
841 | } else { | |
842 | /* Otherwise remove all wep keys */ | |
843 | ret = lbs_remove_wep_keys(priv); | |
844 | } | |
845 | ||
846 | lbs_deb_leave(LBS_DEB_CFG80211); | |
847 | return ret; | |
848 | } | |
849 | ||
850 | ||
851 | /* | |
852 | * Enable/Disable RSN status | |
853 | */ | |
854 | static int lbs_enable_rsn(struct lbs_private *priv, int enable) | |
855 | { | |
856 | struct cmd_ds_802_11_enable_rsn cmd; | |
857 | int ret; | |
858 | ||
859 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", enable); | |
860 | ||
861 | /* | |
862 | * cmd 2f 00 | |
863 | * size 0c 00 | |
864 | * sequence xx xx | |
865 | * result 00 00 | |
866 | * action 01 00 ACT_SET | |
867 | * enable 01 00 | |
868 | */ | |
869 | memset(&cmd, 0, sizeof(cmd)); | |
870 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
871 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
872 | cmd.enable = cpu_to_le16(enable); | |
873 | ||
874 | ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); | |
875 | ||
876 | lbs_deb_leave(LBS_DEB_CFG80211); | |
877 | return ret; | |
878 | } | |
879 | ||
880 | ||
881 | /* | |
882 | * Set WPA/WPA key material | |
883 | */ | |
884 | ||
885 | /* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we | |
886 | * get rid of WEXT, this should go into host.h */ | |
887 | ||
888 | struct cmd_key_material { | |
889 | struct cmd_header hdr; | |
890 | ||
891 | __le16 action; | |
892 | struct MrvlIEtype_keyParamSet param; | |
beabe914 | 893 | } __packed; |
e86dc1ca KD |
894 | |
895 | static int lbs_set_key_material(struct lbs_private *priv, | |
896 | int key_type, | |
897 | int key_info, | |
898 | u8 *key, u16 key_len) | |
899 | { | |
900 | struct cmd_key_material cmd; | |
901 | int ret; | |
902 | ||
903 | lbs_deb_enter(LBS_DEB_CFG80211); | |
904 | ||
905 | /* | |
906 | * Example for WPA (TKIP): | |
907 | * | |
908 | * cmd 5e 00 | |
909 | * size 34 00 | |
910 | * sequence xx xx | |
911 | * result 00 00 | |
912 | * action 01 00 | |
913 | * TLV type 00 01 key param | |
914 | * length 00 26 | |
915 | * key type 01 00 TKIP | |
916 | * key info 06 00 UNICAST | ENABLED | |
917 | * key len 20 00 | |
918 | * key 32 bytes | |
919 | */ | |
920 | memset(&cmd, 0, sizeof(cmd)); | |
921 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
922 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
923 | cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); | |
924 | cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); | |
925 | cmd.param.keytypeid = cpu_to_le16(key_type); | |
926 | cmd.param.keyinfo = cpu_to_le16(key_info); | |
927 | cmd.param.keylen = cpu_to_le16(key_len); | |
928 | if (key && key_len) | |
929 | memcpy(cmd.param.key, key, key_len); | |
930 | ||
931 | ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); | |
932 | ||
933 | lbs_deb_leave(LBS_DEB_CFG80211); | |
934 | return ret; | |
935 | } | |
936 | ||
937 | ||
938 | /* | |
939 | * Sets the auth type (open, shared, etc) in the firmware. That | |
940 | * we use CMD_802_11_AUTHENTICATE is misleading, this firmware | |
941 | * command doesn't send an authentication frame at all, it just | |
942 | * stores the auth_type. | |
943 | */ | |
944 | static int lbs_set_authtype(struct lbs_private *priv, | |
945 | struct cfg80211_connect_params *sme) | |
946 | { | |
947 | struct cmd_ds_802_11_authenticate cmd; | |
948 | int ret; | |
949 | ||
950 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", sme->auth_type); | |
951 | ||
952 | /* | |
953 | * cmd 11 00 | |
954 | * size 19 00 | |
955 | * sequence xx xx | |
956 | * result 00 00 | |
957 | * BSS id 00 13 19 80 da 30 | |
958 | * auth type 00 | |
959 | * reserved 00 00 00 00 00 00 00 00 00 00 | |
960 | */ | |
961 | memset(&cmd, 0, sizeof(cmd)); | |
962 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
963 | if (sme->bssid) | |
964 | memcpy(cmd.bssid, sme->bssid, ETH_ALEN); | |
965 | /* convert auth_type */ | |
966 | ret = lbs_auth_to_authtype(sme->auth_type); | |
967 | if (ret < 0) | |
968 | goto done; | |
969 | ||
970 | cmd.authtype = ret; | |
971 | ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); | |
972 | ||
973 | done: | |
974 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
975 | return ret; | |
976 | } | |
977 | ||
978 | ||
979 | /* | |
980 | * Create association request | |
981 | */ | |
982 | #define LBS_ASSOC_MAX_CMD_SIZE \ | |
983 | (sizeof(struct cmd_ds_802_11_associate) \ | |
984 | - 512 /* cmd_ds_802_11_associate.iebuf */ \ | |
985 | + LBS_MAX_SSID_TLV_SIZE \ | |
986 | + LBS_MAX_CHANNEL_TLV_SIZE \ | |
987 | + LBS_MAX_CF_PARAM_TLV_SIZE \ | |
988 | + LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
989 | + LBS_MAX_WPA_TLV_SIZE) | |
990 | ||
991 | static int lbs_associate(struct lbs_private *priv, | |
992 | struct cfg80211_bss *bss, | |
993 | struct cfg80211_connect_params *sme) | |
994 | { | |
995 | struct cmd_ds_802_11_associate_response *resp; | |
996 | struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, | |
997 | GFP_KERNEL); | |
998 | const u8 *ssid_eid; | |
999 | size_t len, resp_ie_len; | |
1000 | int status; | |
1001 | int ret; | |
1002 | u8 *pos = &(cmd->iebuf[0]); | |
1003 | ||
1004 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1005 | ||
1006 | if (!cmd) { | |
1007 | ret = -ENOMEM; | |
1008 | goto done; | |
1009 | } | |
1010 | ||
1011 | /* | |
1012 | * cmd 50 00 | |
1013 | * length 34 00 | |
1014 | * sequence xx xx | |
1015 | * result 00 00 | |
1016 | * BSS id 00 13 19 80 da 30 | |
1017 | * capabilities 11 00 | |
1018 | * listen interval 0a 00 | |
1019 | * beacon interval 00 00 | |
1020 | * DTIM period 00 | |
1021 | * TLVs xx (up to 512 bytes) | |
1022 | */ | |
1023 | cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); | |
1024 | ||
1025 | /* Fill in static fields */ | |
1026 | memcpy(cmd->bssid, bss->bssid, ETH_ALEN); | |
1027 | cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); | |
1028 | cmd->capability = cpu_to_le16(bss->capability); | |
1029 | ||
1030 | /* add SSID TLV */ | |
1031 | ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); | |
1032 | if (ssid_eid) | |
1033 | pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); | |
1034 | else | |
1035 | lbs_deb_assoc("no SSID\n"); | |
1036 | ||
1037 | /* add DS param TLV */ | |
1038 | if (bss->channel) | |
1039 | pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); | |
1040 | else | |
1041 | lbs_deb_assoc("no channel\n"); | |
1042 | ||
1043 | /* add (empty) CF param TLV */ | |
1044 | pos += lbs_add_cf_param_tlv(pos); | |
1045 | ||
1046 | /* add rates TLV */ | |
1047 | pos += lbs_add_common_rates_tlv(pos, bss); | |
1048 | ||
1049 | /* add auth type TLV */ | |
1050 | if (priv->fwrelease >= 0x09000000) | |
1051 | pos += lbs_add_auth_type_tlv(pos, sme->auth_type); | |
1052 | ||
1053 | /* add WPA/WPA2 TLV */ | |
1054 | if (sme->ie && sme->ie_len) | |
1055 | pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); | |
1056 | ||
1057 | len = (sizeof(*cmd) - sizeof(cmd->iebuf)) + | |
1058 | (u16)(pos - (u8 *) &cmd->iebuf); | |
1059 | cmd->hdr.size = cpu_to_le16(len); | |
1060 | ||
1061 | /* store for later use */ | |
1062 | memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); | |
1063 | ||
1064 | ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); | |
1065 | if (ret) | |
1066 | goto done; | |
1067 | ||
1068 | ||
1069 | /* generate connect message to cfg80211 */ | |
1070 | ||
1071 | resp = (void *) cmd; /* recast for easier field access */ | |
1072 | status = le16_to_cpu(resp->statuscode); | |
1073 | ||
1074 | /* Convert statis code of old firmware */ | |
1075 | if (priv->fwrelease < 0x09000000) | |
1076 | switch (status) { | |
1077 | case 0: | |
1078 | break; | |
1079 | case 1: | |
1080 | lbs_deb_assoc("invalid association parameters\n"); | |
1081 | status = WLAN_STATUS_CAPS_UNSUPPORTED; | |
1082 | break; | |
1083 | case 2: | |
1084 | lbs_deb_assoc("timer expired while waiting for AP\n"); | |
1085 | status = WLAN_STATUS_AUTH_TIMEOUT; | |
1086 | break; | |
1087 | case 3: | |
1088 | lbs_deb_assoc("association refused by AP\n"); | |
1089 | status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; | |
1090 | break; | |
1091 | case 4: | |
1092 | lbs_deb_assoc("authentication refused by AP\n"); | |
1093 | status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; | |
1094 | break; | |
1095 | default: | |
1096 | lbs_deb_assoc("association failure %d\n", status); | |
1097 | status = WLAN_STATUS_UNSPECIFIED_FAILURE; | |
1098 | } | |
1099 | ||
1100 | lbs_deb_assoc("status %d, capability 0x%04x\n", status, | |
1101 | le16_to_cpu(resp->capability)); | |
1102 | ||
1103 | resp_ie_len = le16_to_cpu(resp->hdr.size) | |
1104 | - sizeof(resp->hdr) | |
1105 | - 6; | |
1106 | cfg80211_connect_result(priv->dev, | |
1107 | priv->assoc_bss, | |
1108 | sme->ie, sme->ie_len, | |
1109 | resp->iebuf, resp_ie_len, | |
1110 | status, | |
1111 | GFP_KERNEL); | |
1112 | ||
1113 | if (status == 0) { | |
1114 | /* TODO: get rid of priv->connect_status */ | |
1115 | priv->connect_status = LBS_CONNECTED; | |
1116 | netif_carrier_on(priv->dev); | |
1117 | if (!priv->tx_pending_len) | |
1118 | netif_tx_wake_all_queues(priv->dev); | |
1119 | } | |
1120 | ||
1121 | ||
1122 | done: | |
1123 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1124 | return ret; | |
1125 | } | |
1126 | ||
1127 | ||
1128 | ||
1129 | static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, | |
1130 | struct cfg80211_connect_params *sme) | |
1131 | { | |
1132 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1133 | struct cfg80211_bss *bss = NULL; | |
1134 | int ret = 0; | |
1135 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1136 | ||
1137 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1138 | ||
1139 | if (sme->bssid) { | |
1140 | bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, | |
1141 | sme->ssid, sme->ssid_len, | |
1142 | WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); | |
1143 | } else { | |
1144 | /* | |
1145 | * Here we have an impedance mismatch. The firmware command | |
1146 | * CMD_802_11_ASSOCIATE always needs a BSSID, it cannot | |
1147 | * connect otherwise. However, for the connect-API of | |
1148 | * cfg80211 the bssid is purely optional. We don't get one, | |
1149 | * except the user specifies one on the "iw" command line. | |
1150 | * | |
1151 | * If we don't got one, we could initiate a scan and look | |
1152 | * for the best matching cfg80211_bss entry. | |
1153 | * | |
1154 | * Or, better yet, net/wireless/sme.c get's rewritten into | |
1155 | * something more generally useful. | |
1156 | */ | |
1157 | lbs_pr_err("TODO: no BSS specified\n"); | |
1158 | ret = -ENOTSUPP; | |
1159 | goto done; | |
1160 | } | |
1161 | ||
1162 | ||
1163 | if (!bss) { | |
1164 | lbs_pr_err("assicate: bss %pM not in scan results\n", | |
1165 | sme->bssid); | |
1166 | ret = -ENOENT; | |
1167 | goto done; | |
1168 | } | |
1169 | lbs_deb_assoc("trying %pM", sme->bssid); | |
1170 | lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", | |
1171 | sme->crypto.cipher_group, | |
1172 | sme->key_idx, sme->key_len); | |
1173 | ||
1174 | /* As this is a new connection, clear locally stored WEP keys */ | |
1175 | priv->wep_tx_key = 0; | |
1176 | memset(priv->wep_key, 0, sizeof(priv->wep_key)); | |
1177 | memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); | |
1178 | ||
1179 | /* set/remove WEP keys */ | |
1180 | switch (sme->crypto.cipher_group) { | |
1181 | case WLAN_CIPHER_SUITE_WEP40: | |
1182 | case WLAN_CIPHER_SUITE_WEP104: | |
1183 | /* Store provided WEP keys in priv-> */ | |
1184 | priv->wep_tx_key = sme->key_idx; | |
1185 | priv->wep_key_len[sme->key_idx] = sme->key_len; | |
1186 | memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); | |
1187 | /* Set WEP keys and WEP mode */ | |
1188 | lbs_set_wep_keys(priv); | |
1189 | priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; | |
1190 | lbs_set_mac_control(priv); | |
1191 | /* No RSN mode for WEP */ | |
1192 | lbs_enable_rsn(priv, 0); | |
1193 | break; | |
1194 | case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ | |
1195 | /* | |
1196 | * If we don't have no WEP, no WPA and no WPA2, | |
1197 | * we remove all keys like in the WPA/WPA2 setup, | |
1198 | * we just don't set RSN. | |
1199 | * | |
1200 | * Therefore: fall-throught | |
1201 | */ | |
1202 | case WLAN_CIPHER_SUITE_TKIP: | |
1203 | case WLAN_CIPHER_SUITE_CCMP: | |
1204 | /* Remove WEP keys and WEP mode */ | |
1205 | lbs_remove_wep_keys(priv); | |
1206 | priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; | |
1207 | lbs_set_mac_control(priv); | |
1208 | ||
1209 | /* clear the WPA/WPA2 keys */ | |
1210 | lbs_set_key_material(priv, | |
1211 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1212 | KEY_INFO_WPA_UNICAST, | |
1213 | NULL, 0); | |
1214 | lbs_set_key_material(priv, | |
1215 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1216 | KEY_INFO_WPA_MCAST, | |
1217 | NULL, 0); | |
1218 | /* RSN mode for WPA/WPA2 */ | |
1219 | lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); | |
1220 | break; | |
1221 | default: | |
1222 | lbs_pr_err("unsupported cipher group 0x%x\n", | |
1223 | sme->crypto.cipher_group); | |
1224 | ret = -ENOTSUPP; | |
1225 | goto done; | |
1226 | } | |
1227 | ||
1228 | lbs_set_authtype(priv, sme); | |
1229 | lbs_set_radio(priv, preamble, 1); | |
1230 | ||
1231 | /* Do the actual association */ | |
1232 | lbs_associate(priv, bss, sme); | |
1233 | ||
1234 | done: | |
1235 | if (bss) | |
1236 | cfg80211_put_bss(bss); | |
1237 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1238 | return ret; | |
1239 | } | |
1240 | ||
e86dc1ca KD |
1241 | static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, |
1242 | u16 reason_code) | |
1243 | { | |
1244 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1245 | struct cmd_ds_802_11_deauthenticate cmd; | |
ff9fc791 | 1246 | |
e86dc1ca | 1247 | lbs_deb_enter_args(LBS_DEB_CFG80211, "reason_code %d", reason_code); |
ff9fc791 | 1248 | |
e86dc1ca KD |
1249 | /* store for lbs_cfg_ret_disconnect() */ |
1250 | priv->disassoc_reason = reason_code; | |
1251 | ||
1252 | memset(&cmd, 0, sizeof(cmd)); | |
1253 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1254 | /* Mildly ugly to use a locally store my own BSSID ... */ | |
1255 | memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); | |
1256 | cmd.reasoncode = cpu_to_le16(reason_code); | |
1257 | ||
e4fe4eaf KD |
1258 | if (lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd)) |
1259 | return -EFAULT; | |
1260 | ||
1261 | cfg80211_disconnected(priv->dev, | |
1262 | priv->disassoc_reason, | |
1263 | NULL, 0, | |
1264 | GFP_KERNEL); | |
1265 | priv->connect_status = LBS_DISCONNECTED; | |
e86dc1ca KD |
1266 | |
1267 | return 0; | |
1268 | } | |
1269 | ||
1270 | ||
1271 | static int lbs_cfg_set_default_key(struct wiphy *wiphy, | |
1272 | struct net_device *netdev, | |
1273 | u8 key_index) | |
1274 | { | |
1275 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1276 | ||
1277 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1278 | ||
1279 | if (key_index != priv->wep_tx_key) { | |
1280 | lbs_deb_assoc("set_default_key: to %d\n", key_index); | |
1281 | priv->wep_tx_key = key_index; | |
1282 | lbs_set_wep_keys(priv); | |
1283 | } | |
1284 | ||
1285 | return 0; | |
1286 | } | |
1287 | ||
1288 | ||
1289 | static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, | |
1290 | u8 idx, const u8 *mac_addr, | |
1291 | struct key_params *params) | |
1292 | { | |
1293 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1294 | u16 key_info; | |
1295 | u16 key_type; | |
1296 | int ret = 0; | |
1297 | ||
1298 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1299 | ||
1300 | lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", | |
1301 | params->cipher, mac_addr); | |
1302 | lbs_deb_assoc("add_key: key index %d, key len %d\n", | |
1303 | idx, params->key_len); | |
1304 | if (params->key_len) | |
1305 | lbs_deb_hex(LBS_DEB_CFG80211, "KEY", | |
1306 | params->key, params->key_len); | |
1307 | ||
1308 | lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); | |
1309 | if (params->seq_len) | |
1310 | lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", | |
1311 | params->seq, params->seq_len); | |
1312 | ||
1313 | switch (params->cipher) { | |
1314 | case WLAN_CIPHER_SUITE_WEP40: | |
1315 | case WLAN_CIPHER_SUITE_WEP104: | |
1316 | /* actually compare if something has changed ... */ | |
1317 | if ((priv->wep_key_len[idx] != params->key_len) || | |
1318 | memcmp(priv->wep_key[idx], | |
1319 | params->key, params->key_len) != 0) { | |
1320 | priv->wep_key_len[idx] = params->key_len; | |
1321 | memcpy(priv->wep_key[idx], | |
1322 | params->key, params->key_len); | |
1323 | lbs_set_wep_keys(priv); | |
1324 | } | |
1325 | break; | |
1326 | case WLAN_CIPHER_SUITE_TKIP: | |
1327 | case WLAN_CIPHER_SUITE_CCMP: | |
1328 | key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) | |
1329 | ? KEY_INFO_WPA_UNICAST | |
1330 | : KEY_INFO_WPA_MCAST); | |
1331 | key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) | |
1332 | ? KEY_TYPE_ID_TKIP | |
1333 | : KEY_TYPE_ID_AES; | |
1334 | lbs_set_key_material(priv, | |
1335 | key_type, | |
1336 | key_info, | |
1337 | params->key, params->key_len); | |
1338 | break; | |
1339 | default: | |
1340 | lbs_pr_err("unhandled cipher 0x%x\n", params->cipher); | |
1341 | ret = -ENOTSUPP; | |
1342 | break; | |
1343 | } | |
1344 | ||
1345 | return ret; | |
1346 | } | |
1347 | ||
1348 | ||
1349 | static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, | |
1350 | u8 key_index, const u8 *mac_addr) | |
1351 | { | |
1352 | ||
1353 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1354 | ||
1355 | lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", | |
1356 | key_index, mac_addr); | |
1357 | ||
1358 | #ifdef TODO | |
1359 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1360 | /* | |
1361 | * I think can keep this a NO-OP, because: | |
1362 | ||
1363 | * - we clear all keys whenever we do lbs_cfg_connect() anyway | |
1364 | * - neither "iw" nor "wpa_supplicant" won't call this during | |
1365 | * an ongoing connection | |
1366 | * - TODO: but I have to check if this is still true when | |
1367 | * I set the AP to periodic re-keying | |
1368 | * - we've not kzallec() something when we've added a key at | |
1369 | * lbs_cfg_connect() or lbs_cfg_add_key(). | |
1370 | * | |
1371 | * This causes lbs_cfg_del_key() only called at disconnect time, | |
1372 | * where we'd just waste time deleting a key that is not going | |
1373 | * to be used anyway. | |
1374 | */ | |
1375 | if (key_index < 3 && priv->wep_key_len[key_index]) { | |
1376 | priv->wep_key_len[key_index] = 0; | |
1377 | lbs_set_wep_keys(priv); | |
1378 | } | |
1379 | #endif | |
1380 | ||
1381 | return 0; | |
1382 | } | |
1383 | ||
1384 | ||
e86dc1ca KD |
1385 | /*************************************************************************** |
1386 | * Get station | |
1387 | */ | |
1388 | ||
1389 | /* | |
1390 | * Returns the signal or 0 in case of an error. | |
1391 | */ | |
1392 | ||
1393 | /* like "struct cmd_ds_802_11_rssi", but with cmd_header. Once we get rid | |
1394 | * of WEXT, this should go into host.h */ | |
1395 | struct cmd_rssi { | |
1396 | struct cmd_header hdr; | |
1397 | ||
1398 | __le16 n_or_snr; | |
1399 | __le16 nf; | |
1400 | __le16 avg_snr; | |
1401 | __le16 avg_nf; | |
beabe914 | 1402 | } __packed; |
e86dc1ca KD |
1403 | |
1404 | static int lbs_get_signal(struct lbs_private *priv, s8 *signal, s8 *noise) | |
1405 | { | |
1406 | struct cmd_rssi cmd; | |
1407 | int ret; | |
1408 | ||
1409 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1410 | cmd.n_or_snr = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR); | |
1411 | ret = lbs_cmd_with_response(priv, CMD_802_11_RSSI, &cmd); | |
1412 | ||
1413 | if (ret == 0) { | |
1414 | *signal = CAL_RSSI(le16_to_cpu(cmd.n_or_snr), | |
1415 | le16_to_cpu(cmd.nf)); | |
1416 | *noise = CAL_NF(le16_to_cpu(cmd.nf)); | |
1417 | } | |
1418 | return ret; | |
1419 | } | |
1420 | ||
1421 | ||
1422 | static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, | |
1423 | u8 *mac, struct station_info *sinfo) | |
1424 | { | |
1425 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1426 | s8 signal, noise; | |
1427 | int ret; | |
1428 | size_t i; | |
1429 | ||
1430 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1431 | ||
1432 | sinfo->filled |= STATION_INFO_TX_BYTES | | |
1433 | STATION_INFO_TX_PACKETS | | |
1434 | STATION_INFO_RX_BYTES | | |
1435 | STATION_INFO_RX_PACKETS; | |
1436 | sinfo->tx_bytes = priv->dev->stats.tx_bytes; | |
1437 | sinfo->tx_packets = priv->dev->stats.tx_packets; | |
1438 | sinfo->rx_bytes = priv->dev->stats.rx_bytes; | |
1439 | sinfo->rx_packets = priv->dev->stats.rx_packets; | |
1440 | ||
1441 | /* Get current RSSI */ | |
1442 | ret = lbs_get_signal(priv, &signal, &noise); | |
1443 | if (ret == 0) { | |
1444 | sinfo->signal = signal; | |
1445 | sinfo->filled |= STATION_INFO_SIGNAL; | |
1446 | } | |
1447 | ||
1448 | /* Convert priv->cur_rate from hw_value to NL80211 value */ | |
1449 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
1450 | if (priv->cur_rate == lbs_rates[i].hw_value) { | |
1451 | sinfo->txrate.legacy = lbs_rates[i].bitrate; | |
1452 | sinfo->filled |= STATION_INFO_TX_BITRATE; | |
1453 | break; | |
1454 | } | |
1455 | } | |
1456 | ||
1457 | return 0; | |
1458 | } | |
1459 | ||
1460 | ||
1461 | ||
1462 | ||
1463 | /*************************************************************************** | |
1464 | * "Site survey", here just current channel and noise level | |
1465 | */ | |
1466 | ||
1467 | static int lbs_get_survey(struct wiphy *wiphy, struct net_device *dev, | |
1468 | int idx, struct survey_info *survey) | |
1469 | { | |
1470 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1471 | s8 signal, noise; | |
1472 | int ret; | |
1473 | ||
1474 | if (idx != 0) | |
1475 | ret = -ENOENT; | |
1476 | ||
1477 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1478 | ||
1479 | survey->channel = ieee80211_get_channel(wiphy, | |
1480 | ieee80211_channel_to_frequency(priv->channel)); | |
1481 | ||
1482 | ret = lbs_get_signal(priv, &signal, &noise); | |
1483 | if (ret == 0) { | |
1484 | survey->filled = SURVEY_INFO_NOISE_DBM; | |
1485 | survey->noise = noise; | |
1486 | } | |
1487 | ||
1488 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1489 | return ret; | |
1490 | } | |
1491 | ||
1492 | ||
1493 | ||
1494 | ||
1495 | /*************************************************************************** | |
1496 | * Change interface | |
1497 | */ | |
1498 | ||
1499 | static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, | |
1500 | enum nl80211_iftype type, u32 *flags, | |
1501 | struct vif_params *params) | |
1502 | { | |
1503 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1504 | int ret = 0; | |
1505 | ||
1506 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1507 | ||
1508 | switch (type) { | |
1509 | case NL80211_IFTYPE_MONITOR: | |
a45b6f4f | 1510 | ret = lbs_set_monitor_mode(priv, 1); |
e86dc1ca KD |
1511 | break; |
1512 | case NL80211_IFTYPE_STATION: | |
1513 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1514 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1515 | if (!ret) |
1516 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 1); | |
1517 | break; | |
1518 | case NL80211_IFTYPE_ADHOC: | |
1519 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1520 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1521 | if (!ret) |
1522 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 2); | |
1523 | break; | |
1524 | default: | |
1525 | ret = -ENOTSUPP; | |
1526 | } | |
1527 | ||
1528 | if (!ret) | |
1529 | priv->wdev->iftype = type; | |
1530 | ||
1531 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1532 | return ret; | |
1533 | } | |
1534 | ||
1535 | ||
1536 | ||
1537 | /*************************************************************************** | |
1538 | * IBSS (Ad-Hoc) | |
1539 | */ | |
1540 | ||
1541 | /* The firmware needs the following bits masked out of the beacon-derived | |
1542 | * capability field when associating/joining to a BSS: | |
1543 | * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) | |
1544 | */ | |
1545 | #define CAPINFO_MASK (~(0xda00)) | |
1546 | ||
1547 | ||
1548 | static void lbs_join_post(struct lbs_private *priv, | |
1549 | struct cfg80211_ibss_params *params, | |
1550 | u8 *bssid, u16 capability) | |
1551 | { | |
1552 | u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ | |
1553 | 2 + 4 + /* basic rates */ | |
1554 | 2 + 1 + /* DS parameter */ | |
1555 | 2 + 2 + /* atim */ | |
1556 | 2 + 8]; /* extended rates */ | |
1557 | u8 *fake = fake_ie; | |
1558 | ||
1559 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1560 | ||
1561 | /* | |
1562 | * For cfg80211_inform_bss, we'll need a fake IE, as we can't get | |
1563 | * the real IE from the firmware. So we fabricate a fake IE based on | |
1564 | * what the firmware actually sends (sniffed with wireshark). | |
1565 | */ | |
1566 | /* Fake SSID IE */ | |
1567 | *fake++ = WLAN_EID_SSID; | |
1568 | *fake++ = params->ssid_len; | |
1569 | memcpy(fake, params->ssid, params->ssid_len); | |
1570 | fake += params->ssid_len; | |
1571 | /* Fake supported basic rates IE */ | |
1572 | *fake++ = WLAN_EID_SUPP_RATES; | |
1573 | *fake++ = 4; | |
1574 | *fake++ = 0x82; | |
1575 | *fake++ = 0x84; | |
1576 | *fake++ = 0x8b; | |
1577 | *fake++ = 0x96; | |
1578 | /* Fake DS channel IE */ | |
1579 | *fake++ = WLAN_EID_DS_PARAMS; | |
1580 | *fake++ = 1; | |
1581 | *fake++ = params->channel->hw_value; | |
1582 | /* Fake IBSS params IE */ | |
1583 | *fake++ = WLAN_EID_IBSS_PARAMS; | |
1584 | *fake++ = 2; | |
1585 | *fake++ = 0; /* ATIM=0 */ | |
1586 | *fake++ = 0; | |
1587 | /* Fake extended rates IE, TODO: don't add this for 802.11b only, | |
1588 | * but I don't know how this could be checked */ | |
1589 | *fake++ = WLAN_EID_EXT_SUPP_RATES; | |
1590 | *fake++ = 8; | |
1591 | *fake++ = 0x0c; | |
1592 | *fake++ = 0x12; | |
1593 | *fake++ = 0x18; | |
1594 | *fake++ = 0x24; | |
1595 | *fake++ = 0x30; | |
1596 | *fake++ = 0x48; | |
1597 | *fake++ = 0x60; | |
1598 | *fake++ = 0x6c; | |
1599 | lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); | |
1600 | ||
1601 | cfg80211_inform_bss(priv->wdev->wiphy, | |
1602 | params->channel, | |
1603 | bssid, | |
1604 | 0, | |
1605 | capability, | |
1606 | params->beacon_interval, | |
1607 | fake_ie, fake - fake_ie, | |
1608 | 0, GFP_KERNEL); | |
e4fe4eaf KD |
1609 | |
1610 | memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); | |
1611 | priv->wdev->ssid_len = params->ssid_len; | |
1612 | ||
e86dc1ca KD |
1613 | cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL); |
1614 | ||
1615 | /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ | |
1616 | priv->connect_status = LBS_CONNECTED; | |
1617 | netif_carrier_on(priv->dev); | |
1618 | if (!priv->tx_pending_len) | |
1619 | netif_wake_queue(priv->dev); | |
1620 | ||
1621 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1622 | } | |
1623 | ||
1624 | static int lbs_ibss_join_existing(struct lbs_private *priv, | |
1625 | struct cfg80211_ibss_params *params, | |
1626 | struct cfg80211_bss *bss) | |
1627 | { | |
1628 | const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
1629 | struct cmd_ds_802_11_ad_hoc_join cmd; | |
1630 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1631 | int ret = 0; | |
1632 | ||
1633 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1634 | ||
1635 | /* TODO: set preamble based on scan result */ | |
1636 | ret = lbs_set_radio(priv, preamble, 1); | |
1637 | if (ret) | |
1638 | goto out; | |
1639 | ||
1640 | /* | |
1641 | * Example CMD_802_11_AD_HOC_JOIN command: | |
1642 | * | |
1643 | * command 2c 00 CMD_802_11_AD_HOC_JOIN | |
1644 | * size 65 00 | |
1645 | * sequence xx xx | |
1646 | * result 00 00 | |
1647 | * bssid 02 27 27 97 2f 96 | |
1648 | * ssid 49 42 53 53 00 00 00 00 | |
1649 | * 00 00 00 00 00 00 00 00 | |
1650 | * 00 00 00 00 00 00 00 00 | |
1651 | * 00 00 00 00 00 00 00 00 | |
1652 | * type 02 CMD_BSS_TYPE_IBSS | |
1653 | * beacon period 64 00 | |
1654 | * dtim period 00 | |
1655 | * timestamp 00 00 00 00 00 00 00 00 | |
1656 | * localtime 00 00 00 00 00 00 00 00 | |
1657 | * IE DS 03 | |
1658 | * IE DS len 01 | |
1659 | * IE DS channel 01 | |
1660 | * reserveed 00 00 00 00 | |
1661 | * IE IBSS 06 | |
1662 | * IE IBSS len 02 | |
1663 | * IE IBSS atim 00 00 | |
1664 | * reserved 00 00 00 00 | |
1665 | * capability 02 00 | |
1666 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 | |
1667 | * fail timeout ff 00 | |
1668 | * probe delay 00 00 | |
1669 | */ | |
1670 | memset(&cmd, 0, sizeof(cmd)); | |
1671 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1672 | ||
1673 | memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); | |
1674 | memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); | |
1675 | cmd.bss.type = CMD_BSS_TYPE_IBSS; | |
1676 | cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1677 | cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; | |
1678 | cmd.bss.ds.header.len = 1; | |
1679 | cmd.bss.ds.channel = params->channel->hw_value; | |
1680 | cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1681 | cmd.bss.ibss.header.len = 2; | |
1682 | cmd.bss.ibss.atimwindow = 0; | |
1683 | cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); | |
1684 | ||
1685 | /* set rates to the intersection of our rates and the rates in the | |
1686 | bss */ | |
1687 | if (!rates_eid) { | |
1688 | lbs_add_rates(cmd.bss.rates); | |
1689 | } else { | |
1690 | int hw, i; | |
1691 | u8 rates_max = rates_eid[1]; | |
1692 | u8 *rates = cmd.bss.rates; | |
1693 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
1694 | u8 hw_rate = lbs_rates[hw].bitrate / 5; | |
1695 | for (i = 0; i < rates_max; i++) { | |
1696 | if (hw_rate == (rates_eid[i+2] & 0x7f)) { | |
1697 | u8 rate = rates_eid[i+2]; | |
1698 | if (rate == 0x02 || rate == 0x04 || | |
1699 | rate == 0x0b || rate == 0x16) | |
1700 | rate |= 0x80; | |
1701 | *rates++ = rate; | |
1702 | } | |
1703 | } | |
1704 | } | |
1705 | } | |
1706 | ||
1707 | /* Only v8 and below support setting this */ | |
1708 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { | |
1709 | cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); | |
1710 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1711 | } | |
1712 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); | |
1713 | if (ret) | |
1714 | goto out; | |
1715 | ||
1716 | /* | |
1717 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1718 | * | |
1719 | * response 2c 80 | |
1720 | * size 09 00 | |
1721 | * sequence xx xx | |
1722 | * result 00 00 | |
1723 | * reserved 00 | |
1724 | */ | |
1725 | lbs_join_post(priv, params, bss->bssid, bss->capability); | |
1726 | ||
1727 | out: | |
1728 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1729 | return ret; | |
1730 | } | |
1731 | ||
1732 | ||
1733 | ||
1734 | static int lbs_ibss_start_new(struct lbs_private *priv, | |
1735 | struct cfg80211_ibss_params *params) | |
1736 | { | |
1737 | struct cmd_ds_802_11_ad_hoc_start cmd; | |
1738 | struct cmd_ds_802_11_ad_hoc_result *resp = | |
1739 | (struct cmd_ds_802_11_ad_hoc_result *) &cmd; | |
1740 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1741 | int ret = 0; | |
1742 | u16 capability; | |
1743 | ||
1744 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1745 | ||
1746 | ret = lbs_set_radio(priv, preamble, 1); | |
1747 | if (ret) | |
1748 | goto out; | |
1749 | ||
1750 | /* | |
1751 | * Example CMD_802_11_AD_HOC_START command: | |
1752 | * | |
1753 | * command 2b 00 CMD_802_11_AD_HOC_START | |
1754 | * size b1 00 | |
1755 | * sequence xx xx | |
1756 | * result 00 00 | |
1757 | * ssid 54 45 53 54 00 00 00 00 | |
1758 | * 00 00 00 00 00 00 00 00 | |
1759 | * 00 00 00 00 00 00 00 00 | |
1760 | * 00 00 00 00 00 00 00 00 | |
1761 | * bss type 02 | |
1762 | * beacon period 64 00 | |
1763 | * dtim period 00 | |
1764 | * IE IBSS 06 | |
1765 | * IE IBSS len 02 | |
1766 | * IE IBSS atim 00 00 | |
1767 | * reserved 00 00 00 00 | |
1768 | * IE DS 03 | |
1769 | * IE DS len 01 | |
1770 | * IE DS channel 01 | |
1771 | * reserved 00 00 00 00 | |
1772 | * probe delay 00 00 | |
1773 | * capability 02 00 | |
1774 | * rates 82 84 8b 96 (basic rates with have bit 7 set) | |
1775 | * 0c 12 18 24 30 48 60 6c | |
1776 | * padding 100 bytes | |
1777 | */ | |
1778 | memset(&cmd, 0, sizeof(cmd)); | |
1779 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1780 | memcpy(cmd.ssid, params->ssid, params->ssid_len); | |
1781 | cmd.bsstype = CMD_BSS_TYPE_IBSS; | |
1782 | cmd.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1783 | cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1784 | cmd.ibss.header.len = 2; | |
1785 | cmd.ibss.atimwindow = 0; | |
1786 | cmd.ds.header.id = WLAN_EID_DS_PARAMS; | |
1787 | cmd.ds.header.len = 1; | |
1788 | cmd.ds.channel = params->channel->hw_value; | |
1789 | /* Only v8 and below support setting probe delay */ | |
1790 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) | |
1791 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1792 | /* TODO: mix in WLAN_CAPABILITY_PRIVACY */ | |
1793 | capability = WLAN_CAPABILITY_IBSS; | |
1794 | cmd.capability = cpu_to_le16(capability); | |
1795 | lbs_add_rates(cmd.rates); | |
1796 | ||
1797 | ||
1798 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); | |
1799 | if (ret) | |
1800 | goto out; | |
1801 | ||
1802 | /* | |
1803 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1804 | * | |
1805 | * response 2b 80 | |
1806 | * size 14 00 | |
1807 | * sequence xx xx | |
1808 | * result 00 00 | |
1809 | * reserved 00 | |
1810 | * bssid 02 2b 7b 0f 86 0e | |
1811 | */ | |
1812 | lbs_join_post(priv, params, resp->bssid, capability); | |
1813 | ||
1814 | out: | |
1815 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1816 | return ret; | |
1817 | } | |
1818 | ||
1819 | ||
1820 | static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, | |
1821 | struct cfg80211_ibss_params *params) | |
1822 | { | |
1823 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1824 | int ret = 0; | |
1825 | struct cfg80211_bss *bss; | |
1826 | DECLARE_SSID_BUF(ssid_buf); | |
1827 | ||
1828 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1829 | ||
1830 | if (!params->channel) { | |
1831 | ret = -ENOTSUPP; | |
1832 | goto out; | |
1833 | } | |
1834 | ||
1835 | ret = lbs_set_channel(priv, params->channel->hw_value); | |
1836 | if (ret) | |
ff9fc791 HS |
1837 | goto out; |
1838 | ||
e86dc1ca KD |
1839 | /* Search if someone is beaconing. This assumes that the |
1840 | * bss list is populated already */ | |
1841 | bss = cfg80211_get_bss(wiphy, params->channel, params->bssid, | |
1842 | params->ssid, params->ssid_len, | |
1843 | WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); | |
1844 | ||
1845 | if (bss) { | |
1846 | ret = lbs_ibss_join_existing(priv, params, bss); | |
1847 | cfg80211_put_bss(bss); | |
1848 | } else | |
1849 | ret = lbs_ibss_start_new(priv, params); | |
1850 | ||
ff9fc791 HS |
1851 | |
1852 | out: | |
1853 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1854 | return ret; | |
1855 | } | |
1856 | ||
1857 | ||
e86dc1ca KD |
1858 | static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
1859 | { | |
1860 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1861 | struct cmd_ds_802_11_ad_hoc_stop cmd; | |
1862 | int ret = 0; | |
1863 | ||
1864 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1865 | ||
1866 | memset(&cmd, 0, sizeof(cmd)); | |
1867 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1868 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); | |
1869 | ||
1870 | /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ | |
1871 | lbs_mac_event_disconnected(priv); | |
1872 | ||
1873 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1874 | return ret; | |
1875 | } | |
1876 | ||
ff9fc791 HS |
1877 | |
1878 | ||
e86dc1ca KD |
1879 | |
1880 | /*************************************************************************** | |
1881 | * Initialization | |
1882 | */ | |
1883 | ||
ff9fc791 HS |
1884 | static struct cfg80211_ops lbs_cfg80211_ops = { |
1885 | .set_channel = lbs_cfg_set_channel, | |
e86dc1ca KD |
1886 | .scan = lbs_cfg_scan, |
1887 | .connect = lbs_cfg_connect, | |
1888 | .disconnect = lbs_cfg_disconnect, | |
1889 | .add_key = lbs_cfg_add_key, | |
1890 | .del_key = lbs_cfg_del_key, | |
1891 | .set_default_key = lbs_cfg_set_default_key, | |
1892 | .get_station = lbs_cfg_get_station, | |
1893 | .dump_survey = lbs_get_survey, | |
1894 | .change_virtual_intf = lbs_change_intf, | |
1895 | .join_ibss = lbs_join_ibss, | |
1896 | .leave_ibss = lbs_leave_ibss, | |
ff9fc791 HS |
1897 | }; |
1898 | ||
1899 | ||
1900 | /* | |
1901 | * At this time lbs_private *priv doesn't even exist, so we just allocate | |
1902 | * memory and don't initialize the wiphy further. This is postponed until we | |
1903 | * can talk to the firmware and happens at registration time in | |
1904 | * lbs_cfg_wiphy_register(). | |
1905 | */ | |
1906 | struct wireless_dev *lbs_cfg_alloc(struct device *dev) | |
1907 | { | |
1908 | int ret = 0; | |
1909 | struct wireless_dev *wdev; | |
1910 | ||
1911 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1912 | ||
1913 | wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); | |
1914 | if (!wdev) { | |
1915 | dev_err(dev, "cannot allocate wireless device\n"); | |
1916 | return ERR_PTR(-ENOMEM); | |
1917 | } | |
1918 | ||
1919 | wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); | |
1920 | if (!wdev->wiphy) { | |
1921 | dev_err(dev, "cannot allocate wiphy\n"); | |
1922 | ret = -ENOMEM; | |
1923 | goto err_wiphy_new; | |
1924 | } | |
1925 | ||
1926 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1927 | return wdev; | |
1928 | ||
1929 | err_wiphy_new: | |
1930 | kfree(wdev); | |
1931 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1932 | return ERR_PTR(ret); | |
1933 | } | |
1934 | ||
1935 | ||
e86dc1ca KD |
1936 | static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) |
1937 | { | |
1938 | struct region_code_mapping { | |
1939 | const char *cn; | |
1940 | int code; | |
1941 | }; | |
1942 | ||
1943 | /* Section 5.17.2 */ | |
1944 | static struct region_code_mapping regmap[] = { | |
1945 | {"US ", 0x10}, /* US FCC */ | |
1946 | {"CA ", 0x20}, /* Canada */ | |
1947 | {"EU ", 0x30}, /* ETSI */ | |
1948 | {"ES ", 0x31}, /* Spain */ | |
1949 | {"FR ", 0x32}, /* France */ | |
1950 | {"JP ", 0x40}, /* Japan */ | |
1951 | }; | |
1952 | size_t i; | |
1953 | ||
1954 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1955 | ||
1956 | for (i = 0; i < ARRAY_SIZE(regmap); i++) | |
1957 | if (regmap[i].code == priv->regioncode) { | |
1958 | regulatory_hint(priv->wdev->wiphy, regmap[i].cn); | |
1959 | break; | |
1960 | } | |
1961 | ||
1962 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1963 | } | |
1964 | ||
1965 | ||
ff9fc791 HS |
1966 | /* |
1967 | * This function get's called after lbs_setup_firmware() determined the | |
1968 | * firmware capabities. So we can setup the wiphy according to our | |
1969 | * hardware/firmware. | |
1970 | */ | |
1971 | int lbs_cfg_register(struct lbs_private *priv) | |
1972 | { | |
1973 | struct wireless_dev *wdev = priv->wdev; | |
1974 | int ret; | |
1975 | ||
1976 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1977 | ||
1978 | wdev->wiphy->max_scan_ssids = 1; | |
1979 | wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
1980 | ||
e86dc1ca KD |
1981 | wdev->wiphy->interface_modes = |
1982 | BIT(NL80211_IFTYPE_STATION) | | |
1983 | BIT(NL80211_IFTYPE_ADHOC); | |
1984 | if (lbs_rtap_supported(priv)) | |
1985 | wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
ff9fc791 | 1986 | |
ff9fc791 HS |
1987 | wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz; |
1988 | ||
1989 | /* | |
1990 | * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have | |
1991 | * never seen a firmware without WPA | |
1992 | */ | |
1993 | wdev->wiphy->cipher_suites = cipher_suites; | |
1994 | wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); | |
1047d5ed | 1995 | wdev->wiphy->reg_notifier = lbs_reg_notifier; |
ff9fc791 HS |
1996 | |
1997 | ret = wiphy_register(wdev->wiphy); | |
1998 | if (ret < 0) | |
1999 | lbs_pr_err("cannot register wiphy device\n"); | |
2000 | ||
73714004 DM |
2001 | priv->wiphy_registered = true; |
2002 | ||
ff9fc791 HS |
2003 | ret = register_netdev(priv->dev); |
2004 | if (ret) | |
2005 | lbs_pr_err("cannot register network device\n"); | |
2006 | ||
e86dc1ca KD |
2007 | INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); |
2008 | ||
2009 | lbs_cfg_set_regulatory_hint(priv); | |
2010 | ||
ff9fc791 HS |
2011 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); |
2012 | return ret; | |
2013 | } | |
2014 | ||
1047d5ed KD |
2015 | /** |
2016 | * @brief This function sets DOMAIN INFO to FW | |
2017 | * @param priv pointer to struct lbs_private | |
2018 | * @return 0; -1 | |
2019 | */ | |
2020 | static int lbs_11d_set_domain_info(struct lbs_private *priv) | |
2021 | { | |
2022 | int ret; | |
2023 | ||
2024 | ret = lbs_prepare_and_send_command(priv, CMD_802_11D_DOMAIN_INFO, | |
2025 | CMD_ACT_SET, | |
2026 | CMD_OPTION_WAITFORRSP, 0, NULL); | |
2027 | if (ret) | |
2028 | lbs_deb_11d("fail to dnld domain info\n"); | |
2029 | ||
2030 | return ret; | |
2031 | } | |
2032 | ||
2033 | static void lbs_send_domain_info_cmd_fw(struct wiphy *wiphy, | |
2034 | struct regulatory_request *request) | |
2035 | { | |
2036 | u8 no_of_triplet = 0; | |
2037 | u8 no_of_parsed_chan = 0; | |
2038 | u8 first_channel = 0, next_chan = 0, max_pwr = 0; | |
2039 | u8 i, flag = 0; | |
2040 | enum ieee80211_band band; | |
2041 | struct ieee80211_supported_band *sband; | |
2042 | struct ieee80211_channel *ch; | |
2043 | struct lbs_private *priv = wiphy_priv(wiphy); | |
2044 | struct lbs_802_11d_domain_reg *domain_info = &priv->domain_reg; | |
2045 | int ret = 0; | |
2046 | ||
2047 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2048 | ||
2049 | /* Set country code */ | |
2050 | domain_info->country_code[0] = request->alpha2[0]; | |
2051 | domain_info->country_code[1] = request->alpha2[1]; | |
2052 | domain_info->country_code[2] = ' '; | |
2053 | ||
2054 | for (band = 0; band < IEEE80211_NUM_BANDS ; band++) { | |
2055 | ||
2056 | if (!wiphy->bands[band]) | |
2057 | continue; | |
2058 | ||
2059 | sband = wiphy->bands[band]; | |
2060 | ||
2061 | for (i = 0; i < sband->n_channels ; i++) { | |
2062 | ch = &sband->channels[i]; | |
2063 | if (ch->flags & IEEE80211_CHAN_DISABLED) | |
2064 | continue; | |
2065 | ||
2066 | if (!flag) { | |
2067 | flag = 1; | |
2068 | next_chan = first_channel = (u32) ch->hw_value; | |
2069 | max_pwr = ch->max_power; | |
2070 | no_of_parsed_chan = 1; | |
2071 | continue; | |
2072 | } | |
2073 | ||
2074 | if (ch->hw_value == next_chan + 1 && | |
2075 | ch->max_power == max_pwr) { | |
2076 | next_chan++; | |
2077 | no_of_parsed_chan++; | |
2078 | } else { | |
2079 | domain_info->triplet[no_of_triplet] | |
2080 | .chans.first_channel = first_channel; | |
2081 | domain_info->triplet[no_of_triplet] | |
2082 | .chans.num_channels = no_of_parsed_chan; | |
2083 | domain_info->triplet[no_of_triplet] | |
2084 | .chans.max_power = max_pwr; | |
2085 | no_of_triplet++; | |
2086 | flag = 0; | |
2087 | } | |
2088 | } | |
2089 | if (flag) { | |
2090 | domain_info->triplet[no_of_triplet] | |
2091 | .chans.first_channel = first_channel; | |
2092 | domain_info->triplet[no_of_triplet] | |
2093 | .chans.num_channels = no_of_parsed_chan; | |
2094 | domain_info->triplet[no_of_triplet] | |
2095 | .chans.max_power = max_pwr; | |
2096 | no_of_triplet++; | |
2097 | } | |
2098 | } | |
2099 | ||
2100 | domain_info->no_triplet = no_of_triplet; | |
2101 | ||
2102 | /* Set domain info */ | |
2103 | ret = lbs_11d_set_domain_info(priv); | |
2104 | if (ret) | |
2105 | lbs_pr_err("11D: error setting domain info in FW\n"); | |
2106 | ||
2107 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2108 | } | |
2109 | ||
2110 | int lbs_reg_notifier(struct wiphy *wiphy, | |
2111 | struct regulatory_request *request) | |
2112 | { | |
2113 | lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " | |
2114 | "callback for domain %c%c\n", request->alpha2[0], | |
2115 | request->alpha2[1]); | |
2116 | ||
2117 | lbs_send_domain_info_cmd_fw(wiphy, request); | |
2118 | ||
2119 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2120 | ||
2121 | return 0; | |
2122 | } | |
ff9fc791 | 2123 | |
e86dc1ca KD |
2124 | void lbs_scan_deinit(struct lbs_private *priv) |
2125 | { | |
2126 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2127 | cancel_delayed_work_sync(&priv->scan_work); | |
2128 | } | |
2129 | ||
2130 | ||
ff9fc791 HS |
2131 | void lbs_cfg_free(struct lbs_private *priv) |
2132 | { | |
2133 | struct wireless_dev *wdev = priv->wdev; | |
2134 | ||
2135 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2136 | ||
2137 | if (!wdev) | |
2138 | return; | |
2139 | ||
73714004 | 2140 | if (priv->wiphy_registered) |
ff9fc791 | 2141 | wiphy_unregister(wdev->wiphy); |
73714004 DM |
2142 | |
2143 | if (wdev->wiphy) | |
ff9fc791 | 2144 | wiphy_free(wdev->wiphy); |
73714004 | 2145 | |
ff9fc791 HS |
2146 | kfree(wdev); |
2147 | } |