]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * Copyright (C) 2002 Intersil Americas Inc. |
3 | * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> | |
4 | * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | * | |
19 | */ | |
20 | ||
1da177e4 LT |
21 | #include <linux/module.h> |
22 | ||
23 | #include <linux/netdevice.h> | |
ff86a543 | 24 | #include <linux/ethtool.h> |
1da177e4 LT |
25 | #include <linux/pci.h> |
26 | #include <linux/etherdevice.h> | |
27 | #include <linux/delay.h> | |
28 | #include <linux/if_arp.h> | |
29 | ||
30 | #include <asm/io.h> | |
31 | ||
32 | #include "prismcompat.h" | |
33 | #include "isl_38xx.h" | |
34 | #include "isl_ioctl.h" | |
35 | #include "islpci_dev.h" | |
36 | #include "islpci_mgt.h" | |
37 | #include "islpci_eth.h" | |
38 | #include "oid_mgt.h" | |
39 | ||
40 | #define ISL3877_IMAGE_FILE "isl3877" | |
41 | #define ISL3886_IMAGE_FILE "isl3886" | |
42 | #define ISL3890_IMAGE_FILE "isl3890" | |
43 | ||
44 | static int prism54_bring_down(islpci_private *); | |
45 | static int islpci_alloc_memory(islpci_private *); | |
46 | static struct net_device_stats *islpci_statistics(struct net_device *); | |
47 | ||
48 | /* Temporary dummy MAC address to use until firmware is loaded. | |
49 | * The idea there is that some tools (such as nameif) may query | |
50 | * the MAC address before the netdev is 'open'. By using a valid | |
51 | * OUI prefix, they can process the netdev properly. | |
52 | * Of course, this is not the final/real MAC address. It doesn't | |
53 | * matter, as you are suppose to be able to change it anytime via | |
54 | * ndev->set_mac_address. Jean II */ | |
55 | static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 }; | |
56 | ||
57 | static int | |
58 | isl_upload_firmware(islpci_private *priv) | |
59 | { | |
60 | u32 reg, rc; | |
61 | void __iomem *device_base = priv->device_base; | |
62 | ||
63 | /* clear the RAMBoot and the Reset bit */ | |
64 | reg = readl(device_base + ISL38XX_CTRL_STAT_REG); | |
65 | reg &= ~ISL38XX_CTRL_STAT_RESET; | |
66 | reg &= ~ISL38XX_CTRL_STAT_RAMBOOT; | |
67 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
68 | wmb(); | |
69 | udelay(ISL38XX_WRITEIO_DELAY); | |
70 | ||
71 | /* set the Reset bit without reading the register ! */ | |
72 | reg |= ISL38XX_CTRL_STAT_RESET; | |
73 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
74 | wmb(); | |
75 | udelay(ISL38XX_WRITEIO_DELAY); | |
76 | ||
77 | /* clear the Reset bit */ | |
78 | reg &= ~ISL38XX_CTRL_STAT_RESET; | |
79 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
80 | wmb(); | |
81 | ||
82 | /* wait a while for the device to reboot */ | |
83 | mdelay(50); | |
84 | ||
85 | { | |
86 | const struct firmware *fw_entry = NULL; | |
87 | long fw_len; | |
88 | const u32 *fw_ptr; | |
89 | ||
90 | rc = request_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV); | |
91 | if (rc) { | |
92 | printk(KERN_ERR | |
93 | "%s: request_firmware() failed for '%s'\n", | |
94 | "prism54", priv->firmware); | |
95 | return rc; | |
96 | } | |
97 | /* prepare the Direct Memory Base register */ | |
98 | reg = ISL38XX_DEV_FIRMWARE_ADDRES; | |
99 | ||
100 | fw_ptr = (u32 *) fw_entry->data; | |
101 | fw_len = fw_entry->size; | |
102 | ||
103 | if (fw_len % 4) { | |
104 | printk(KERN_ERR | |
105 | "%s: firmware '%s' size is not multiple of 32bit, aborting!\n", | |
106 | "prism54", priv->firmware); | |
107 | release_firmware(fw_entry); | |
108 | return -EILSEQ; /* Illegal byte sequence */; | |
109 | } | |
110 | ||
111 | while (fw_len > 0) { | |
112 | long _fw_len = | |
113 | (fw_len > | |
114 | ISL38XX_MEMORY_WINDOW_SIZE) ? | |
115 | ISL38XX_MEMORY_WINDOW_SIZE : fw_len; | |
116 | u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN; | |
117 | ||
beb7dd86 | 118 | /* set the card's base address for writing the data */ |
1da177e4 LT |
119 | isl38xx_w32_flush(device_base, reg, |
120 | ISL38XX_DIR_MEM_BASE_REG); | |
121 | wmb(); /* be paranoid */ | |
122 | ||
123 | /* increment the write address for next iteration */ | |
124 | reg += _fw_len; | |
125 | fw_len -= _fw_len; | |
126 | ||
127 | /* write the data to the Direct Memory Window 32bit-wise */ | |
128 | /* memcpy_toio() doesn't guarantee 32bit writes :-| */ | |
129 | while (_fw_len > 0) { | |
130 | /* use non-swapping writel() */ | |
131 | __raw_writel(*fw_ptr, dev_fw_ptr); | |
132 | fw_ptr++, dev_fw_ptr++; | |
133 | _fw_len -= 4; | |
134 | } | |
135 | ||
136 | /* flush PCI posting */ | |
137 | (void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH); | |
138 | wmb(); /* be paranoid again */ | |
139 | ||
140 | BUG_ON(_fw_len != 0); | |
141 | } | |
142 | ||
143 | BUG_ON(fw_len != 0); | |
144 | ||
145 | /* Firmware version is at offset 40 (also for "newmac") */ | |
146 | printk(KERN_DEBUG "%s: firmware version: %.8s\n", | |
147 | priv->ndev->name, fw_entry->data + 40); | |
148 | ||
149 | release_firmware(fw_entry); | |
150 | } | |
151 | ||
152 | /* now reset the device | |
153 | * clear the Reset & ClkRun bit, set the RAMBoot bit */ | |
154 | reg = readl(device_base + ISL38XX_CTRL_STAT_REG); | |
155 | reg &= ~ISL38XX_CTRL_STAT_CLKRUN; | |
156 | reg &= ~ISL38XX_CTRL_STAT_RESET; | |
157 | reg |= ISL38XX_CTRL_STAT_RAMBOOT; | |
158 | isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG); | |
159 | wmb(); | |
160 | udelay(ISL38XX_WRITEIO_DELAY); | |
161 | ||
162 | /* set the reset bit latches the host override and RAMBoot bits | |
163 | * into the device for operation when the reset bit is reset */ | |
164 | reg |= ISL38XX_CTRL_STAT_RESET; | |
165 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
166 | /* don't do flush PCI posting here! */ | |
167 | wmb(); | |
168 | udelay(ISL38XX_WRITEIO_DELAY); | |
169 | ||
170 | /* clear the reset bit should start the whole circus */ | |
171 | reg &= ~ISL38XX_CTRL_STAT_RESET; | |
172 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
173 | /* don't do flush PCI posting here! */ | |
174 | wmb(); | |
175 | udelay(ISL38XX_WRITEIO_DELAY); | |
176 | ||
177 | return 0; | |
178 | } | |
179 | ||
180 | /****************************************************************************** | |
181 | Device Interrupt Handler | |
182 | ******************************************************************************/ | |
183 | ||
184 | irqreturn_t | |
7d12e780 | 185 | islpci_interrupt(int irq, void *config) |
1da177e4 LT |
186 | { |
187 | u32 reg; | |
188 | islpci_private *priv = config; | |
189 | struct net_device *ndev = priv->ndev; | |
190 | void __iomem *device = priv->device_base; | |
191 | int powerstate = ISL38XX_PSM_POWERSAVE_STATE; | |
192 | ||
193 | /* lock the interrupt handler */ | |
194 | spin_lock(&priv->slock); | |
195 | ||
196 | /* received an interrupt request on a shared IRQ line | |
197 | * first check whether the device is in sleep mode */ | |
198 | reg = readl(device + ISL38XX_CTRL_STAT_REG); | |
199 | if (reg & ISL38XX_CTRL_STAT_SLEEPMODE) | |
200 | /* device is in sleep mode, IRQ was generated by someone else */ | |
201 | { | |
202 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
203 | DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); | |
204 | #endif | |
205 | spin_unlock(&priv->slock); | |
206 | return IRQ_NONE; | |
207 | } | |
208 | ||
209 | ||
210 | /* check whether there is any source of interrupt on the device */ | |
211 | reg = readl(device + ISL38XX_INT_IDENT_REG); | |
212 | ||
213 | /* also check the contents of the Interrupt Enable Register, because this | |
214 | * will filter out interrupt sources from other devices on the same irq ! */ | |
215 | reg &= readl(device + ISL38XX_INT_EN_REG); | |
216 | reg &= ISL38XX_INT_SOURCES; | |
217 | ||
218 | if (reg != 0) { | |
219 | if (islpci_get_state(priv) != PRV_STATE_SLEEP) | |
220 | powerstate = ISL38XX_PSM_ACTIVE_STATE; | |
221 | ||
222 | /* reset the request bits in the Identification register */ | |
223 | isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG); | |
224 | ||
225 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
226 | DEBUG(SHOW_FUNCTION_CALLS, | |
227 | "IRQ: Identification register 0x%p 0x%x \n", device, reg); | |
228 | #endif | |
229 | ||
230 | /* check for each bit in the register separately */ | |
231 | if (reg & ISL38XX_INT_IDENT_UPDATE) { | |
232 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
233 | /* Queue has been updated */ | |
234 | DEBUG(SHOW_TRACING, "IRQ: Update flag \n"); | |
235 | ||
236 | DEBUG(SHOW_QUEUE_INDEXES, | |
237 | "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n", | |
238 | le32_to_cpu(priv->control_block-> | |
239 | driver_curr_frag[0]), | |
240 | le32_to_cpu(priv->control_block-> | |
241 | driver_curr_frag[1]), | |
242 | le32_to_cpu(priv->control_block-> | |
243 | driver_curr_frag[2]), | |
244 | le32_to_cpu(priv->control_block-> | |
245 | driver_curr_frag[3]), | |
246 | le32_to_cpu(priv->control_block-> | |
247 | driver_curr_frag[4]), | |
248 | le32_to_cpu(priv->control_block-> | |
249 | driver_curr_frag[5]) | |
250 | ); | |
251 | ||
252 | DEBUG(SHOW_QUEUE_INDEXES, | |
253 | "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n", | |
254 | le32_to_cpu(priv->control_block-> | |
255 | device_curr_frag[0]), | |
256 | le32_to_cpu(priv->control_block-> | |
257 | device_curr_frag[1]), | |
258 | le32_to_cpu(priv->control_block-> | |
259 | device_curr_frag[2]), | |
260 | le32_to_cpu(priv->control_block-> | |
261 | device_curr_frag[3]), | |
262 | le32_to_cpu(priv->control_block-> | |
263 | device_curr_frag[4]), | |
264 | le32_to_cpu(priv->control_block-> | |
265 | device_curr_frag[5]) | |
266 | ); | |
267 | #endif | |
268 | ||
269 | /* cleanup the data low transmit queue */ | |
270 | islpci_eth_cleanup_transmit(priv, priv->control_block); | |
271 | ||
272 | /* device is in active state, update the | |
273 | * powerstate flag if necessary */ | |
274 | powerstate = ISL38XX_PSM_ACTIVE_STATE; | |
275 | ||
276 | /* check all three queues in priority order | |
277 | * call the PIMFOR receive function until the | |
278 | * queue is empty */ | |
279 | if (isl38xx_in_queue(priv->control_block, | |
280 | ISL38XX_CB_RX_MGMTQ) != 0) { | |
281 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
282 | DEBUG(SHOW_TRACING, | |
283 | "Received frame in Management Queue\n"); | |
284 | #endif | |
285 | islpci_mgt_receive(ndev); | |
286 | ||
287 | islpci_mgt_cleanup_transmit(ndev); | |
288 | ||
289 | /* Refill slots in receive queue */ | |
290 | islpci_mgmt_rx_fill(ndev); | |
291 | ||
292 | /* no need to trigger the device, next | |
293 | islpci_mgt_transaction does it */ | |
294 | } | |
295 | ||
296 | while (isl38xx_in_queue(priv->control_block, | |
297 | ISL38XX_CB_RX_DATA_LQ) != 0) { | |
298 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
299 | DEBUG(SHOW_TRACING, | |
300 | "Received frame in Data Low Queue \n"); | |
301 | #endif | |
302 | islpci_eth_receive(priv); | |
303 | } | |
304 | ||
305 | /* check whether the data transmit queues were full */ | |
306 | if (priv->data_low_tx_full) { | |
307 | /* check whether the transmit is not full anymore */ | |
308 | if (ISL38XX_CB_TX_QSIZE - | |
309 | isl38xx_in_queue(priv->control_block, | |
310 | ISL38XX_CB_TX_DATA_LQ) >= | |
311 | ISL38XX_MIN_QTHRESHOLD) { | |
312 | /* nope, the driver is ready for more network frames */ | |
313 | netif_wake_queue(priv->ndev); | |
314 | ||
315 | /* reset the full flag */ | |
316 | priv->data_low_tx_full = 0; | |
317 | } | |
318 | } | |
319 | } | |
320 | ||
321 | if (reg & ISL38XX_INT_IDENT_INIT) { | |
322 | /* Device has been initialized */ | |
323 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
324 | DEBUG(SHOW_TRACING, | |
325 | "IRQ: Init flag, device initialized \n"); | |
326 | #endif | |
327 | wake_up(&priv->reset_done); | |
328 | } | |
329 | ||
330 | if (reg & ISL38XX_INT_IDENT_SLEEP) { | |
331 | /* Device intends to move to powersave state */ | |
332 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
333 | DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n"); | |
334 | #endif | |
335 | isl38xx_handle_sleep_request(priv->control_block, | |
336 | &powerstate, | |
337 | priv->device_base); | |
338 | } | |
339 | ||
340 | if (reg & ISL38XX_INT_IDENT_WAKEUP) { | |
341 | /* Device has been woken up to active state */ | |
342 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
343 | DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n"); | |
344 | #endif | |
345 | ||
346 | isl38xx_handle_wakeup(priv->control_block, | |
347 | &powerstate, priv->device_base); | |
348 | } | |
349 | } else { | |
350 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
351 | DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); | |
352 | #endif | |
353 | spin_unlock(&priv->slock); | |
354 | return IRQ_NONE; | |
355 | } | |
356 | ||
357 | /* sleep -> ready */ | |
358 | if (islpci_get_state(priv) == PRV_STATE_SLEEP | |
359 | && powerstate == ISL38XX_PSM_ACTIVE_STATE) | |
360 | islpci_set_state(priv, PRV_STATE_READY); | |
361 | ||
362 | /* !sleep -> sleep */ | |
363 | if (islpci_get_state(priv) != PRV_STATE_SLEEP | |
364 | && powerstate == ISL38XX_PSM_POWERSAVE_STATE) | |
365 | islpci_set_state(priv, PRV_STATE_SLEEP); | |
366 | ||
367 | /* unlock the interrupt handler */ | |
368 | spin_unlock(&priv->slock); | |
369 | ||
370 | return IRQ_HANDLED; | |
371 | } | |
372 | ||
373 | /****************************************************************************** | |
374 | Network Interface Control & Statistical functions | |
375 | ******************************************************************************/ | |
376 | static int | |
377 | islpci_open(struct net_device *ndev) | |
378 | { | |
379 | u32 rc; | |
380 | islpci_private *priv = netdev_priv(ndev); | |
381 | ||
382 | /* reset data structures, upload firmware and reset device */ | |
383 | rc = islpci_reset(priv,1); | |
384 | if (rc) { | |
385 | prism54_bring_down(priv); | |
386 | return rc; /* Returns informative message */ | |
387 | } | |
388 | ||
389 | netif_start_queue(ndev); | |
7b463ced LR |
390 | |
391 | /* Turn off carrier unless we know we have associated */ | |
392 | netif_carrier_off(ndev); | |
1da177e4 LT |
393 | |
394 | return 0; | |
395 | } | |
396 | ||
397 | static int | |
398 | islpci_close(struct net_device *ndev) | |
399 | { | |
400 | islpci_private *priv = netdev_priv(ndev); | |
401 | ||
402 | printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name); | |
403 | ||
404 | netif_stop_queue(ndev); | |
405 | ||
406 | return prism54_bring_down(priv); | |
407 | } | |
408 | ||
409 | static int | |
410 | prism54_bring_down(islpci_private *priv) | |
411 | { | |
412 | void __iomem *device_base = priv->device_base; | |
413 | u32 reg; | |
414 | /* we are going to shutdown the device */ | |
415 | islpci_set_state(priv, PRV_STATE_PREBOOT); | |
416 | ||
417 | /* disable all device interrupts in case they weren't */ | |
93b2dd12 | 418 | isl38xx_disable_interrupts(priv->device_base); |
1da177e4 LT |
419 | |
420 | /* For safety reasons, we may want to ensure that no DMA transfer is | |
421 | * currently in progress by emptying the TX and RX queues. */ | |
422 | ||
423 | /* wait until interrupts have finished executing on other CPUs */ | |
424 | synchronize_irq(priv->pdev->irq); | |
425 | ||
426 | reg = readl(device_base + ISL38XX_CTRL_STAT_REG); | |
427 | reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT); | |
428 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
429 | wmb(); | |
430 | udelay(ISL38XX_WRITEIO_DELAY); | |
431 | ||
432 | reg |= ISL38XX_CTRL_STAT_RESET; | |
433 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
434 | wmb(); | |
435 | udelay(ISL38XX_WRITEIO_DELAY); | |
436 | ||
437 | /* clear the Reset bit */ | |
438 | reg &= ~ISL38XX_CTRL_STAT_RESET; | |
439 | writel(reg, device_base + ISL38XX_CTRL_STAT_REG); | |
440 | wmb(); | |
441 | ||
442 | /* wait a while for the device to reset */ | |
3173c890 | 443 | schedule_timeout_uninterruptible(msecs_to_jiffies(50)); |
1da177e4 LT |
444 | |
445 | return 0; | |
446 | } | |
447 | ||
448 | static int | |
449 | islpci_upload_fw(islpci_private *priv) | |
450 | { | |
451 | islpci_state_t old_state; | |
452 | u32 rc; | |
453 | ||
454 | old_state = islpci_set_state(priv, PRV_STATE_BOOT); | |
455 | ||
456 | printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name); | |
457 | ||
458 | rc = isl_upload_firmware(priv); | |
459 | if (rc) { | |
460 | /* error uploading the firmware */ | |
461 | printk(KERN_ERR "%s: could not upload firmware ('%s')\n", | |
462 | priv->ndev->name, priv->firmware); | |
463 | ||
464 | islpci_set_state(priv, old_state); | |
465 | return rc; | |
466 | } | |
467 | ||
468 | printk(KERN_DEBUG "%s: firmware upload complete\n", | |
469 | priv->ndev->name); | |
470 | ||
471 | islpci_set_state(priv, PRV_STATE_POSTBOOT); | |
472 | ||
473 | return 0; | |
474 | } | |
475 | ||
476 | static int | |
477 | islpci_reset_if(islpci_private *priv) | |
478 | { | |
479 | long remaining; | |
480 | int result = -ETIME; | |
481 | int count; | |
482 | ||
483 | DEFINE_WAIT(wait); | |
484 | prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE); | |
93b2dd12 | 485 | |
1da177e4 LT |
486 | /* now the last step is to reset the interface */ |
487 | isl38xx_interface_reset(priv->device_base, priv->device_host_address); | |
488 | islpci_set_state(priv, PRV_STATE_PREINIT); | |
489 | ||
490 | for(count = 0; count < 2 && result; count++) { | |
491 | /* The software reset acknowledge needs about 220 msec here. | |
492 | * Be conservative and wait for up to one second. */ | |
93b2dd12 | 493 | |
3173c890 | 494 | remaining = schedule_timeout_uninterruptible(HZ); |
1da177e4 LT |
495 | |
496 | if(remaining > 0) { | |
497 | result = 0; | |
498 | break; | |
499 | } | |
500 | ||
93b2dd12 | 501 | /* If we're here it's because our IRQ hasn't yet gone through. |
1da177e4 LT |
502 | * Retry a bit more... |
503 | */ | |
504 | printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", | |
505 | priv->ndev->name); | |
506 | } | |
507 | ||
508 | finish_wait(&priv->reset_done, &wait); | |
509 | ||
510 | if (result) { | |
511 | printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); | |
512 | return result; | |
513 | } | |
514 | ||
515 | islpci_set_state(priv, PRV_STATE_INIT); | |
516 | ||
517 | /* Now that the device is 100% up, let's allow | |
518 | * for the other interrupts -- | |
93b2dd12 | 519 | * NOTE: this is not *yet* true since we've only allowed the |
1da177e4 LT |
520 | * INIT interrupt on the IRQ line. We can perhaps poll |
521 | * the IRQ line until we know for sure the reset went through */ | |
522 | isl38xx_enable_common_interrupts(priv->device_base); | |
523 | ||
524 | down_write(&priv->mib_sem); | |
525 | result = mgt_commit(priv); | |
526 | if (result) { | |
527 | printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); | |
528 | up_write(&priv->mib_sem); | |
529 | return result; | |
530 | } | |
531 | up_write(&priv->mib_sem); | |
532 | ||
533 | islpci_set_state(priv, PRV_STATE_READY); | |
534 | ||
535 | printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name); | |
536 | return 0; | |
537 | } | |
538 | ||
539 | int | |
540 | islpci_reset(islpci_private *priv, int reload_firmware) | |
541 | { | |
542 | isl38xx_control_block *cb = /* volatile not needed */ | |
543 | (isl38xx_control_block *) priv->control_block; | |
544 | unsigned counter; | |
545 | int rc; | |
546 | ||
547 | if (reload_firmware) | |
548 | islpci_set_state(priv, PRV_STATE_PREBOOT); | |
549 | else | |
550 | islpci_set_state(priv, PRV_STATE_POSTBOOT); | |
551 | ||
552 | printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name); | |
553 | ||
554 | /* disable all device interrupts in case they weren't */ | |
555 | isl38xx_disable_interrupts(priv->device_base); | |
556 | ||
557 | /* flush all management queues */ | |
558 | priv->index_mgmt_tx = 0; | |
559 | priv->index_mgmt_rx = 0; | |
560 | ||
561 | /* clear the indexes in the frame pointer */ | |
562 | for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { | |
563 | cb->driver_curr_frag[counter] = cpu_to_le32(0); | |
564 | cb->device_curr_frag[counter] = cpu_to_le32(0); | |
565 | } | |
566 | ||
567 | /* reset the mgmt receive queue */ | |
568 | for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { | |
569 | isl38xx_fragment *frag = &cb->rx_data_mgmt[counter]; | |
570 | frag->size = cpu_to_le16(MGMT_FRAME_SIZE); | |
571 | frag->flags = 0; | |
572 | frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr); | |
573 | } | |
574 | ||
575 | for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { | |
576 | cb->rx_data_low[counter].address = | |
577 | cpu_to_le32((u32) priv->pci_map_rx_address[counter]); | |
578 | } | |
579 | ||
580 | /* since the receive queues are filled with empty fragments, now we can | |
581 | * set the corresponding indexes in the Control Block */ | |
582 | priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] = | |
583 | cpu_to_le32(ISL38XX_CB_RX_QSIZE); | |
584 | priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = | |
585 | cpu_to_le32(ISL38XX_CB_MGMT_QSIZE); | |
586 | ||
587 | /* reset the remaining real index registers and full flags */ | |
588 | priv->free_data_rx = 0; | |
589 | priv->free_data_tx = 0; | |
590 | priv->data_low_tx_full = 0; | |
591 | ||
592 | if (reload_firmware) { /* Should we load the firmware ? */ | |
593 | /* now that the data structures are cleaned up, upload | |
594 | * firmware and reset interface */ | |
595 | rc = islpci_upload_fw(priv); | |
596 | if (rc) { | |
597 | printk(KERN_ERR "%s: islpci_reset: failure\n", | |
598 | priv->ndev->name); | |
599 | return rc; | |
600 | } | |
601 | } | |
602 | ||
603 | /* finally reset interface */ | |
604 | rc = islpci_reset_if(priv); | |
605 | if (rc) | |
606 | printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n"); | |
607 | return rc; | |
608 | } | |
609 | ||
610 | static struct net_device_stats * | |
611 | islpci_statistics(struct net_device *ndev) | |
612 | { | |
613 | islpci_private *priv = netdev_priv(ndev); | |
614 | ||
615 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
616 | DEBUG(SHOW_FUNCTION_CALLS, "islpci_statistics\n"); | |
617 | #endif | |
618 | ||
619 | return &priv->statistics; | |
620 | } | |
621 | ||
622 | /****************************************************************************** | |
623 | Network device configuration functions | |
624 | ******************************************************************************/ | |
625 | static int | |
626 | islpci_alloc_memory(islpci_private *priv) | |
627 | { | |
628 | int counter; | |
629 | ||
630 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
631 | printk(KERN_DEBUG "islpci_alloc_memory\n"); | |
632 | #endif | |
633 | ||
634 | /* remap the PCI device base address to accessable */ | |
635 | if (!(priv->device_base = | |
636 | ioremap(pci_resource_start(priv->pdev, 0), | |
637 | ISL38XX_PCI_MEM_SIZE))) { | |
638 | /* error in remapping the PCI device memory address range */ | |
639 | printk(KERN_ERR "PCI memory remapping failed \n"); | |
640 | return -1; | |
641 | } | |
642 | ||
643 | /* memory layout for consistent DMA region: | |
644 | * | |
645 | * Area 1: Control Block for the device interface | |
646 | * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that | |
647 | * the number of supported stations in the AP determines the minimal | |
648 | * size of the buffer ! | |
649 | */ | |
650 | ||
651 | /* perform the allocation */ | |
652 | priv->driver_mem_address = pci_alloc_consistent(priv->pdev, | |
653 | HOST_MEM_BLOCK, | |
654 | &priv-> | |
655 | device_host_address); | |
656 | ||
657 | if (!priv->driver_mem_address) { | |
658 | /* error allocating the block of PCI memory */ | |
659 | printk(KERN_ERR "%s: could not allocate DMA memory, aborting!", | |
660 | "prism54"); | |
661 | return -1; | |
662 | } | |
663 | ||
664 | /* assign the Control Block to the first address of the allocated area */ | |
665 | priv->control_block = | |
666 | (isl38xx_control_block *) priv->driver_mem_address; | |
667 | ||
668 | /* set the Power Save Buffer pointer directly behind the CB */ | |
669 | priv->device_psm_buffer = | |
670 | priv->device_host_address + CONTROL_BLOCK_SIZE; | |
671 | ||
672 | /* make sure all buffer pointers are initialized */ | |
673 | for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { | |
674 | priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0); | |
675 | priv->control_block->device_curr_frag[counter] = cpu_to_le32(0); | |
676 | } | |
677 | ||
678 | priv->index_mgmt_rx = 0; | |
679 | memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx)); | |
680 | memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx)); | |
681 | ||
682 | /* allocate rx queue for management frames */ | |
683 | if (islpci_mgmt_rx_fill(priv->ndev) < 0) | |
684 | goto out_free; | |
685 | ||
686 | /* now get the data rx skb's */ | |
687 | memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx)); | |
688 | memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address)); | |
689 | ||
690 | for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { | |
691 | struct sk_buff *skb; | |
692 | ||
693 | /* allocate an sk_buff for received data frames storage | |
694 | * each frame on receive size consists of 1 fragment | |
695 | * include any required allignment operations */ | |
696 | if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) { | |
697 | /* error allocating an sk_buff structure elements */ | |
698 | printk(KERN_ERR "Error allocating skb.\n"); | |
699 | skb = NULL; | |
700 | goto out_free; | |
701 | } | |
702 | skb_reserve(skb, (4 - (long) skb->data) & 0x03); | |
703 | /* add the new allocated sk_buff to the buffer array */ | |
704 | priv->data_low_rx[counter] = skb; | |
705 | ||
706 | /* map the allocated skb data area to pci */ | |
707 | priv->pci_map_rx_address[counter] = | |
708 | pci_map_single(priv->pdev, (void *) skb->data, | |
709 | MAX_FRAGMENT_SIZE_RX + 2, | |
710 | PCI_DMA_FROMDEVICE); | |
711 | if (!priv->pci_map_rx_address[counter]) { | |
712 | /* error mapping the buffer to device | |
713 | accessable memory address */ | |
714 | printk(KERN_ERR "failed to map skb DMA'able\n"); | |
715 | goto out_free; | |
716 | } | |
717 | } | |
718 | ||
719 | prism54_acl_init(&priv->acl); | |
eab411f1 | 720 | prism54_wpa_bss_ie_init(priv); |
93b2dd12 | 721 | if (mgt_init(priv)) |
1da177e4 LT |
722 | goto out_free; |
723 | ||
724 | return 0; | |
725 | out_free: | |
726 | islpci_free_memory(priv); | |
727 | return -1; | |
728 | } | |
729 | ||
730 | int | |
731 | islpci_free_memory(islpci_private *priv) | |
732 | { | |
733 | int counter; | |
734 | ||
735 | if (priv->device_base) | |
736 | iounmap(priv->device_base); | |
737 | priv->device_base = NULL; | |
738 | ||
739 | /* free consistent DMA area... */ | |
740 | if (priv->driver_mem_address) | |
741 | pci_free_consistent(priv->pdev, HOST_MEM_BLOCK, | |
742 | priv->driver_mem_address, | |
743 | priv->device_host_address); | |
744 | ||
745 | /* clear some dangling pointers */ | |
746 | priv->driver_mem_address = NULL; | |
747 | priv->device_host_address = 0; | |
748 | priv->device_psm_buffer = 0; | |
749 | priv->control_block = NULL; | |
750 | ||
751 | /* clean up mgmt rx buffers */ | |
752 | for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { | |
753 | struct islpci_membuf *buf = &priv->mgmt_rx[counter]; | |
754 | if (buf->pci_addr) | |
755 | pci_unmap_single(priv->pdev, buf->pci_addr, | |
756 | buf->size, PCI_DMA_FROMDEVICE); | |
757 | buf->pci_addr = 0; | |
b4558ea9 | 758 | kfree(buf->mem); |
1da177e4 LT |
759 | buf->size = 0; |
760 | buf->mem = NULL; | |
761 | } | |
762 | ||
763 | /* clean up data rx buffers */ | |
764 | for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { | |
765 | if (priv->pci_map_rx_address[counter]) | |
766 | pci_unmap_single(priv->pdev, | |
767 | priv->pci_map_rx_address[counter], | |
768 | MAX_FRAGMENT_SIZE_RX + 2, | |
769 | PCI_DMA_FROMDEVICE); | |
770 | priv->pci_map_rx_address[counter] = 0; | |
771 | ||
772 | if (priv->data_low_rx[counter]) | |
773 | dev_kfree_skb(priv->data_low_rx[counter]); | |
774 | priv->data_low_rx[counter] = NULL; | |
775 | } | |
776 | ||
777 | /* Free the acces control list and the WPA list */ | |
778 | prism54_acl_clean(&priv->acl); | |
eab411f1 | 779 | prism54_wpa_bss_ie_clean(priv); |
1da177e4 LT |
780 | mgt_clean(priv); |
781 | ||
782 | return 0; | |
783 | } | |
784 | ||
785 | #if 0 | |
786 | static void | |
787 | islpci_set_multicast_list(struct net_device *dev) | |
788 | { | |
789 | /* put device into promisc mode and let network layer handle it */ | |
790 | } | |
791 | #endif | |
792 | ||
ff86a543 KE |
793 | static void islpci_ethtool_get_drvinfo(struct net_device *dev, |
794 | struct ethtool_drvinfo *info) | |
795 | { | |
796 | strcpy(info->driver, DRV_NAME); | |
797 | strcpy(info->version, DRV_VERSION); | |
798 | } | |
799 | ||
800 | static struct ethtool_ops islpci_ethtool_ops = { | |
801 | .get_drvinfo = islpci_ethtool_get_drvinfo, | |
802 | }; | |
803 | ||
1da177e4 LT |
804 | struct net_device * |
805 | islpci_setup(struct pci_dev *pdev) | |
806 | { | |
807 | islpci_private *priv; | |
808 | struct net_device *ndev = alloc_etherdev(sizeof (islpci_private)); | |
809 | ||
810 | if (!ndev) | |
811 | return ndev; | |
812 | ||
1da177e4 LT |
813 | pci_set_drvdata(pdev, ndev); |
814 | #if defined(SET_NETDEV_DEV) | |
815 | SET_NETDEV_DEV(ndev, &pdev->dev); | |
816 | #endif | |
817 | ||
818 | /* setup the structure members */ | |
819 | ndev->base_addr = pci_resource_start(pdev, 0); | |
820 | ndev->irq = pdev->irq; | |
821 | ||
822 | /* initialize the function pointers */ | |
823 | ndev->open = &islpci_open; | |
824 | ndev->stop = &islpci_close; | |
825 | ndev->get_stats = &islpci_statistics; | |
1da177e4 LT |
826 | ndev->do_ioctl = &prism54_ioctl; |
827 | ndev->wireless_handlers = | |
828 | (struct iw_handler_def *) &prism54_handler_def; | |
ff86a543 | 829 | ndev->ethtool_ops = &islpci_ethtool_ops; |
1da177e4 LT |
830 | |
831 | ndev->hard_start_xmit = &islpci_eth_transmit; | |
832 | /* ndev->set_multicast_list = &islpci_set_multicast_list; */ | |
833 | ndev->addr_len = ETH_ALEN; | |
834 | ndev->set_mac_address = &prism54_set_mac_address; | |
835 | /* Get a non-zero dummy MAC address for nameif. Jean II */ | |
836 | memcpy(ndev->dev_addr, dummy_mac, 6); | |
837 | ||
838 | #ifdef HAVE_TX_TIMEOUT | |
839 | ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT; | |
840 | ndev->tx_timeout = &islpci_eth_tx_timeout; | |
841 | #endif | |
842 | ||
843 | /* allocate a private device structure to the network device */ | |
844 | priv = netdev_priv(ndev); | |
845 | priv->ndev = ndev; | |
846 | priv->pdev = pdev; | |
847 | priv->monitor_type = ARPHRD_IEEE80211; | |
848 | priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ? | |
849 | priv->monitor_type : ARPHRD_ETHER; | |
850 | ||
1da177e4 LT |
851 | /* Add pointers to enable iwspy support. */ |
852 | priv->wireless_data.spy_data = &priv->spy_data; | |
853 | ndev->wireless_data = &priv->wireless_data; | |
1da177e4 LT |
854 | |
855 | /* save the start and end address of the PCI memory area */ | |
856 | ndev->mem_start = (unsigned long) priv->device_base; | |
857 | ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE; | |
858 | ||
859 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
860 | DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base); | |
861 | #endif | |
862 | ||
863 | init_waitqueue_head(&priv->reset_done); | |
864 | ||
865 | /* init the queue read locks, process wait counter */ | |
1b34fd39 | 866 | mutex_init(&priv->mgmt_lock); |
1da177e4 LT |
867 | priv->mgmt_received = NULL; |
868 | init_waitqueue_head(&priv->mgmt_wqueue); | |
f8139218 | 869 | mutex_init(&priv->stats_lock); |
1da177e4 LT |
870 | spin_lock_init(&priv->slock); |
871 | ||
872 | /* init state machine with off#1 state */ | |
873 | priv->state = PRV_STATE_OFF; | |
874 | priv->state_off = 1; | |
875 | ||
876 | /* initialize workqueue's */ | |
c4028958 | 877 | INIT_WORK(&priv->stats_work, prism54_update_stats); |
1da177e4 LT |
878 | priv->stats_timestamp = 0; |
879 | ||
c4028958 | 880 | INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake); |
1da177e4 LT |
881 | priv->reset_task_pending = 0; |
882 | ||
883 | /* allocate various memory areas */ | |
884 | if (islpci_alloc_memory(priv)) | |
885 | goto do_free_netdev; | |
886 | ||
887 | /* select the firmware file depending on the device id */ | |
888 | switch (pdev->device) { | |
889 | case 0x3877: | |
890 | strcpy(priv->firmware, ISL3877_IMAGE_FILE); | |
891 | break; | |
892 | ||
893 | case 0x3886: | |
894 | strcpy(priv->firmware, ISL3886_IMAGE_FILE); | |
895 | break; | |
896 | ||
897 | default: | |
898 | strcpy(priv->firmware, ISL3890_IMAGE_FILE); | |
899 | break; | |
900 | } | |
901 | ||
902 | if (register_netdev(ndev)) { | |
903 | DEBUG(SHOW_ERROR_MESSAGES, | |
904 | "ERROR: register_netdev() failed \n"); | |
905 | goto do_islpci_free_memory; | |
906 | } | |
907 | ||
908 | return ndev; | |
909 | ||
910 | do_islpci_free_memory: | |
911 | islpci_free_memory(priv); | |
912 | do_free_netdev: | |
913 | pci_set_drvdata(pdev, NULL); | |
914 | free_netdev(ndev); | |
915 | priv = NULL; | |
916 | return NULL; | |
917 | } | |
918 | ||
919 | islpci_state_t | |
920 | islpci_set_state(islpci_private *priv, islpci_state_t new_state) | |
921 | { | |
922 | islpci_state_t old_state; | |
923 | ||
924 | /* lock */ | |
925 | old_state = priv->state; | |
926 | ||
927 | /* this means either a race condition or some serious error in | |
928 | * the driver code */ | |
929 | switch (new_state) { | |
930 | case PRV_STATE_OFF: | |
931 | priv->state_off++; | |
932 | default: | |
933 | priv->state = new_state; | |
934 | break; | |
935 | ||
936 | case PRV_STATE_PREBOOT: | |
937 | /* there are actually many off-states, enumerated by | |
938 | * state_off */ | |
939 | if (old_state == PRV_STATE_OFF) | |
940 | priv->state_off--; | |
941 | ||
942 | /* only if hw_unavailable is zero now it means we either | |
943 | * were in off#1 state, or came here from | |
944 | * somewhere else */ | |
945 | if (!priv->state_off) | |
946 | priv->state = new_state; | |
947 | break; | |
948 | }; | |
949 | #if 0 | |
950 | printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n", | |
951 | priv->ndev->name, old_state, new_state, priv->state_off); | |
952 | #endif | |
953 | ||
954 | /* invariants */ | |
955 | BUG_ON(priv->state_off < 0); | |
956 | BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF)); | |
957 | BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF)); | |
958 | ||
959 | /* unlock */ | |
960 | return old_state; | |
961 | } |