]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Gadget support on a system involves | |
3 | # (a) a peripheral controller, and | |
4 | # (b) the gadget driver using it. | |
5 | # | |
6 | # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! | |
7 | # | |
8 | # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). | |
9 | # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). | |
10 | # - Some systems have both kinds of of controller. | |
11 | # | |
12 | # With help from a special transceiver and a "Mini-AB" jack, systems with | |
13 | # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). | |
14 | # | |
15 | menu "USB Gadget Support" | |
16 | ||
17 | config USB_GADGET | |
18 | tristate "Support for USB Gadgets" | |
19 | help | |
20 | USB is a master/slave protocol, organized with one master | |
21 | host (such as a PC) controlling up to 127 peripheral devices. | |
22 | The USB hardware is asymmetric, which makes it easier to set up: | |
23 | you can't connect a "to-the-host" connector to a peripheral. | |
24 | ||
25 | Linux can run in the host, or in the peripheral. In both cases | |
26 | you need a low level bus controller driver, and some software | |
27 | talking to it. Peripheral controllers are often discrete silicon, | |
28 | or are integrated with the CPU in a microcontroller. The more | |
29 | familiar host side controllers have names like like "EHCI", "OHCI", | |
30 | or "UHCI", and are usually integrated into southbridges on PC | |
31 | motherboards. | |
32 | ||
33 | Enable this configuration option if you want to run Linux inside | |
34 | a USB peripheral device. Configure one hardware driver for your | |
35 | peripheral/device side bus controller, and a "gadget driver" for | |
36 | your peripheral protocol. (If you use modular gadget drivers, | |
37 | you may configure more than one.) | |
38 | ||
39 | If in doubt, say "N" and don't enable these drivers; most people | |
40 | don't have this kind of hardware (except maybe inside Linux PDAs). | |
41 | ||
42 | For more information, see <http://www.linux-usb.org/gadget> and | |
43 | the kernel DocBook documentation for this API. | |
44 | ||
45 | config USB_GADGET_DEBUG_FILES | |
46 | boolean "Debugging information files" | |
47 | depends on USB_GADGET && PROC_FS | |
48 | help | |
49 | Some of the drivers in the "gadget" framework can expose | |
50 | debugging information in files such as /proc/driver/udc | |
51 | (for a peripheral controller). The information in these | |
52 | files may help when you're troubleshooting or bringing up a | |
53 | driver on a new board. Enable these files by choosing "Y" | |
54 | here. If in doubt, or to conserve kernel memory, say "N". | |
55 | ||
56 | # | |
57 | # USB Peripheral Controller Support | |
58 | # | |
59 | choice | |
60 | prompt "USB Peripheral Controller" | |
61 | depends on USB_GADGET | |
62 | help | |
63 | A USB device uses a controller to talk to its host. | |
64 | Systems should have only one such upstream link. | |
65 | Many controller drivers are platform-specific; these | |
66 | often need board-specific hooks. | |
67 | ||
68 | config USB_GADGET_NET2280 | |
69 | boolean "NetChip 2280" | |
70 | depends on PCI | |
71 | select USB_GADGET_DUALSPEED | |
72 | help | |
73 | NetChip 2280 is a PCI based USB peripheral controller which | |
74 | supports both full and high speed USB 2.0 data transfers. | |
75 | ||
76 | It has six configurable endpoints, as well as endpoint zero | |
77 | (for control transfers) and several endpoints with dedicated | |
78 | functions. | |
79 | ||
80 | Say "y" to link the driver statically, or "m" to build a | |
81 | dynamically linked module called "net2280" and force all | |
82 | gadget drivers to also be dynamically linked. | |
83 | ||
84 | config USB_NET2280 | |
85 | tristate | |
86 | depends on USB_GADGET_NET2280 | |
87 | default USB_GADGET | |
88 | ||
89 | config USB_GADGET_PXA2XX | |
90 | boolean "PXA 25x or IXP 4xx" | |
91 | depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX | |
92 | help | |
93 | Intel's PXA 25x series XScale ARM-5TE processors include | |
94 | an integrated full speed USB 1.1 device controller. The | |
95 | controller in the IXP 4xx series is register-compatible. | |
96 | ||
97 | It has fifteen fixed-function endpoints, as well as endpoint | |
98 | zero (for control transfers). | |
99 | ||
100 | Say "y" to link the driver statically, or "m" to build a | |
101 | dynamically linked module called "pxa2xx_udc" and force all | |
102 | gadget drivers to also be dynamically linked. | |
103 | ||
104 | config USB_PXA2XX | |
105 | tristate | |
106 | depends on USB_GADGET_PXA2XX | |
107 | default USB_GADGET | |
108 | ||
109 | # if there's only one gadget driver, using only two bulk endpoints, | |
110 | # don't waste memory for the other endpoints | |
111 | config USB_PXA2XX_SMALL | |
112 | depends on USB_GADGET_PXA2XX | |
113 | bool | |
114 | default n if USB_ETH_RNDIS | |
115 | default y if USB_ZERO | |
116 | default y if USB_ETH | |
117 | default y if USB_G_SERIAL | |
118 | ||
119 | config USB_GADGET_GOKU | |
120 | boolean "Toshiba TC86C001 'Goku-S'" | |
121 | depends on PCI | |
122 | help | |
123 | The Toshiba TC86C001 is a PCI device which includes controllers | |
124 | for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). | |
125 | ||
126 | The device controller has three configurable (bulk or interrupt) | |
127 | endpoints, plus endpoint zero (for control transfers). | |
128 | ||
129 | Say "y" to link the driver statically, or "m" to build a | |
130 | dynamically linked module called "goku_udc" and to force all | |
131 | gadget drivers to also be dynamically linked. | |
132 | ||
133 | config USB_GOKU | |
134 | tristate | |
135 | depends on USB_GADGET_GOKU | |
136 | default USB_GADGET | |
137 | ||
138 | ||
139 | config USB_GADGET_LH7A40X | |
140 | boolean "LH7A40X" | |
141 | depends on ARCH_LH7A40X | |
142 | help | |
143 | This driver provides USB Device Controller driver for LH7A40x | |
144 | ||
145 | config USB_LH7A40X | |
146 | tristate | |
147 | depends on USB_GADGET_LH7A40X | |
148 | default USB_GADGET | |
149 | ||
150 | ||
151 | config USB_GADGET_OMAP | |
152 | boolean "OMAP USB Device Controller" | |
153 | depends on ARCH_OMAP | |
154 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
155 | help | |
156 | Many Texas Instruments OMAP processors have flexible full | |
157 | speed USB device controllers, with support for up to 30 | |
158 | endpoints (plus endpoint zero). This driver supports the | |
159 | controller in the OMAP 1611, and should work with controllers | |
160 | in other OMAP processors too, given minor tweaks. | |
161 | ||
162 | Say "y" to link the driver statically, or "m" to build a | |
163 | dynamically linked module called "omap_udc" and force all | |
164 | gadget drivers to also be dynamically linked. | |
165 | ||
166 | config USB_OMAP | |
167 | tristate | |
168 | depends on USB_GADGET_OMAP | |
169 | default USB_GADGET | |
170 | ||
171 | config USB_OTG | |
172 | boolean "OTG Support" | |
173 | depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD | |
174 | help | |
175 | The most notable feature of USB OTG is support for a | |
176 | "Dual-Role" device, which can act as either a device | |
177 | or a host. The initial role choice can be changed | |
178 | later, when two dual-role devices talk to each other. | |
179 | ||
180 | Select this only if your OMAP board has a Mini-AB connector. | |
181 | ||
182 | ||
183 | config USB_GADGET_DUMMY_HCD | |
184 | boolean "Dummy HCD (DEVELOPMENT)" | |
185 | depends on USB && EXPERIMENTAL | |
186 | select USB_GADGET_DUALSPEED | |
187 | help | |
188 | This host controller driver emulates USB, looping all data transfer | |
189 | requests back to a USB "gadget driver" in the same host. The host | |
190 | side is the master; the gadget side is the slave. Gadget drivers | |
191 | can be high, full, or low speed; and they have access to endpoints | |
192 | like those from NET2280, PXA2xx, or SA1100 hardware. | |
193 | ||
194 | This may help in some stages of creating a driver to embed in a | |
195 | Linux device, since it lets you debug several parts of the gadget | |
196 | driver without its hardware or drivers being involved. | |
197 | ||
198 | Since such a gadget side driver needs to interoperate with a host | |
199 | side Linux-USB device driver, this may help to debug both sides | |
200 | of a USB protocol stack. | |
201 | ||
202 | Say "y" to link the driver statically, or "m" to build a | |
203 | dynamically linked module called "dummy_hcd" and force all | |
204 | gadget drivers to also be dynamically linked. | |
205 | ||
206 | config USB_DUMMY_HCD | |
207 | tristate | |
208 | depends on USB_GADGET_DUMMY_HCD | |
209 | default USB_GADGET | |
210 | ||
211 | # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears | |
212 | # first and will be selected by default. | |
213 | ||
214 | endchoice | |
215 | ||
216 | config USB_GADGET_DUALSPEED | |
217 | bool | |
218 | depends on USB_GADGET | |
219 | default n | |
220 | help | |
221 | Means that gadget drivers should include extra descriptors | |
222 | and code to handle dual-speed controllers. | |
223 | ||
224 | # | |
225 | # USB Gadget Drivers | |
226 | # | |
227 | choice | |
228 | tristate "USB Gadget Drivers" | |
229 | depends on USB_GADGET | |
230 | default USB_ETH | |
231 | help | |
232 | A Linux "Gadget Driver" talks to the USB Peripheral Controller | |
233 | driver through the abstract "gadget" API. Some other operating | |
234 | systems call these "client" drivers, of which "class drivers" | |
235 | are a subset (implementing a USB device class specification). | |
236 | A gadget driver implements one or more USB functions using | |
237 | the peripheral hardware. | |
238 | ||
239 | Gadget drivers are hardware-neutral, or "platform independent", | |
240 | except that they sometimes must understand quirks or limitations | |
241 | of the particular controllers they work with. For example, when | |
242 | a controller doesn't support alternate configurations or provide | |
243 | enough of the right types of endpoints, the gadget driver might | |
244 | not be able work with that controller, or might need to implement | |
245 | a less common variant of a device class protocol. | |
246 | ||
247 | # this first set of drivers all depend on bulk-capable hardware. | |
248 | ||
249 | config USB_ZERO | |
250 | tristate "Gadget Zero (DEVELOPMENT)" | |
251 | depends on EXPERIMENTAL | |
252 | help | |
253 | Gadget Zero is a two-configuration device. It either sinks and | |
254 | sources bulk data; or it loops back a configurable number of | |
255 | transfers. It also implements control requests, for "chapter 9" | |
256 | conformance. The driver needs only two bulk-capable endpoints, so | |
257 | it can work on top of most device-side usb controllers. It's | |
258 | useful for testing, and is also a working example showing how | |
259 | USB "gadget drivers" can be written. | |
260 | ||
261 | Make this be the first driver you try using on top of any new | |
262 | USB peripheral controller driver. Then you can use host-side | |
263 | test software, like the "usbtest" driver, to put your hardware | |
264 | and its driver through a basic set of functional tests. | |
265 | ||
266 | Gadget Zero also works with the host-side "usb-skeleton" driver, | |
267 | and with many kinds of host-side test software. You may need | |
268 | to tweak product and vendor IDs before host software knows about | |
269 | this device, and arrange to select an appropriate configuration. | |
270 | ||
271 | Say "y" to link the driver statically, or "m" to build a | |
272 | dynamically linked module called "g_zero". | |
273 | ||
274 | config USB_ZERO_HNPTEST | |
275 | boolean "HNP Test Device" | |
276 | depends on USB_ZERO && USB_OTG | |
277 | help | |
278 | You can configure this device to enumerate using the device | |
279 | identifiers of the USB-OTG test device. That means that when | |
280 | this gadget connects to another OTG device, with this one using | |
281 | the "B-Peripheral" role, that device will use HNP to let this | |
282 | one serve as the USB host instead (in the "B-Host" role). | |
283 | ||
284 | config USB_ETH | |
285 | tristate "Ethernet Gadget (with CDC Ethernet support)" | |
286 | depends on NET | |
287 | help | |
288 | This driver implements Ethernet style communication, in either | |
289 | of two ways: | |
290 | ||
291 | - The "Communication Device Class" (CDC) Ethernet Control Model. | |
292 | That protocol is often avoided with pure Ethernet adapters, in | |
293 | favor of simpler vendor-specific hardware, but is widely | |
294 | supported by firmware for smart network devices. | |
295 | ||
296 | - On hardware can't implement that protocol, a simple CDC subset | |
297 | is used, placing fewer demands on USB. | |
298 | ||
299 | RNDIS support is a third option, more demanding than that subset. | |
300 | ||
301 | Within the USB device, this gadget driver exposes a network device | |
302 | "usbX", where X depends on what other networking devices you have. | |
303 | Treat it like a two-node Ethernet link: host, and gadget. | |
304 | ||
305 | The Linux-USB host-side "usbnet" driver interoperates with this | |
306 | driver, so that deep I/O queues can be supported. On 2.4 kernels, | |
307 | use "CDCEther" instead, if you're using the CDC option. That CDC | |
308 | mode should also interoperate with standard CDC Ethernet class | |
309 | drivers on other host operating systems. | |
310 | ||
311 | Say "y" to link the driver statically, or "m" to build a | |
312 | dynamically linked module called "g_ether". | |
313 | ||
314 | config USB_ETH_RNDIS | |
315 | bool "RNDIS support (EXPERIMENTAL)" | |
316 | depends on USB_ETH && EXPERIMENTAL | |
317 | default y | |
318 | help | |
319 | Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, | |
320 | and Microsoft provides redistributable binary RNDIS drivers for | |
321 | older versions of Windows. | |
322 | ||
323 | If you say "y" here, the Ethernet gadget driver will try to provide | |
324 | a second device configuration, supporting RNDIS to talk to such | |
325 | Microsoft USB hosts. | |
326 | ||
327 | To make MS-Windows work with this, use Documentation/usb/linux.inf | |
328 | as the "driver info file". For versions of MS-Windows older than | |
329 | XP, you'll need to download drivers from Microsoft's website; a URL | |
330 | is given in comments found in that info file. | |
331 | ||
332 | config USB_GADGETFS | |
333 | tristate "Gadget Filesystem (EXPERIMENTAL)" | |
334 | depends on EXPERIMENTAL | |
335 | help | |
336 | This driver provides a filesystem based API that lets user mode | |
337 | programs implement a single-configuration USB device, including | |
338 | endpoint I/O and control requests that don't relate to enumeration. | |
339 | All endpoints, transfer speeds, and transfer types supported by | |
340 | the hardware are available, through read() and write() calls. | |
341 | ||
342 | Say "y" to link the driver statically, or "m" to build a | |
343 | dynamically linked module called "gadgetfs". | |
344 | ||
345 | config USB_FILE_STORAGE | |
346 | tristate "File-backed Storage Gadget" | |
347 | help | |
348 | The File-backed Storage Gadget acts as a USB Mass Storage | |
349 | disk drive. As its storage repository it can use a regular | |
350 | file or a block device (in much the same way as the "loop" | |
351 | device driver), specified as a module parameter. | |
352 | ||
353 | Say "y" to link the driver statically, or "m" to build a | |
354 | dynamically linked module called "g_file_storage". | |
355 | ||
356 | config USB_FILE_STORAGE_TEST | |
357 | bool "File-backed Storage Gadget testing version" | |
358 | depends on USB_FILE_STORAGE | |
359 | default n | |
360 | help | |
361 | Say "y" to generate the larger testing version of the | |
362 | File-backed Storage Gadget, useful for probing the | |
363 | behavior of USB Mass Storage hosts. Not needed for | |
364 | normal operation. | |
365 | ||
366 | config USB_G_SERIAL | |
367 | tristate "Serial Gadget (with CDC ACM support)" | |
368 | help | |
369 | The Serial Gadget talks to the Linux-USB generic serial driver. | |
370 | This driver supports a CDC-ACM module option, which can be used | |
371 | to interoperate with MS-Windows hosts or with the Linux-USB | |
372 | "cdc-acm" driver. | |
373 | ||
374 | Say "y" to link the driver statically, or "m" to build a | |
375 | dynamically linked module called "g_serial". | |
376 | ||
377 | For more information, see Documentation/usb/gadget_serial.txt | |
378 | which includes instructions and a "driver info file" needed to | |
379 | make MS-Windows work with this driver. | |
380 | ||
381 | ||
382 | # put drivers that need isochronous transfer support (for audio | |
383 | # or video class gadget drivers), or specific hardware, here. | |
384 | ||
385 | # - none yet | |
386 | ||
387 | endchoice | |
388 | ||
389 | endmenu |