]>
Commit | Line | Data |
---|---|---|
704232c2 JB |
1 | #ifndef __LINUX_NL80211_H |
2 | #define __LINUX_NL80211_H | |
3 | /* | |
4 | * 802.11 netlink interface public header | |
5 | * | |
10ec4f1d LR |
6 | * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net> |
7 | * Copyright 2008 Michael Wu <flamingice@sourmilk.net> | |
8 | * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> | |
9 | * Copyright 2008 Michael Buesch <mb@bu3sch.de> | |
6bad8766 | 10 | * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> |
10ec4f1d LR |
11 | * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> |
12 | * Copyright 2008 Colin McCabe <colin@cozybit.com> | |
13 | * | |
14 | * Permission to use, copy, modify, and/or distribute this software for any | |
15 | * purpose with or without fee is hereby granted, provided that the above | |
16 | * copyright notice and this permission notice appear in all copies. | |
17 | * | |
18 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
19 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
20 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
21 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
22 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
23 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
24 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
25 | * | |
704232c2 JB |
26 | */ |
27 | ||
5727ef1b JB |
28 | /** |
29 | * DOC: Station handling | |
30 | * | |
31 | * Stations are added per interface, but a special case exists with VLAN | |
32 | * interfaces. When a station is bound to an AP interface, it may be moved | |
33 | * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). | |
34 | * The station is still assumed to belong to the AP interface it was added | |
35 | * to. | |
36 | * | |
37 | * TODO: need more info? | |
38 | */ | |
39 | ||
55682965 JB |
40 | /** |
41 | * enum nl80211_commands - supported nl80211 commands | |
42 | * | |
43 | * @NL80211_CMD_UNSPEC: unspecified command to catch errors | |
44 | * | |
45 | * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request | |
46 | * to get a list of all present wiphys. | |
31888487 | 47 | * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
72bdcf34 JM |
48 | * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
49 | * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or | |
d03415e6 | 50 | * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. |
55682965 JB |
51 | * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
52 | * or rename notification. Has attributes %NL80211_ATTR_WIPHY and | |
53 | * %NL80211_ATTR_WIPHY_NAME. | |
54 | * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes | |
55 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. | |
56 | * | |
57 | * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; | |
58 | * either a dump request on a %NL80211_ATTR_WIPHY or a specific get | |
59 | * on an %NL80211_ATTR_IFINDEX is supported. | |
60 | * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires | |
61 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. | |
62 | * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response | |
63 | * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, | |
64 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also | |
65 | * be sent from userspace to request creation of a new virtual interface, | |
66 | * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and | |
67 | * %NL80211_ATTR_IFNAME. | |
68 | * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes | |
69 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from | |
70 | * userspace to request deletion of a virtual interface, then requires | |
71 | * attribute %NL80211_ATTR_IFINDEX. | |
72 | * | |
41ade00f JB |
73 | * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
74 | * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. | |
3cfcf6ac JM |
75 | * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, |
76 | * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. | |
41ade00f JB |
77 | * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, |
78 | * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER | |
79 | * attributes. | |
80 | * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX | |
81 | * or %NL80211_ATTR_MAC. | |
82 | * | |
ed1b6cc7 JB |
83 | * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a |
84 | * %NL80222_CMD_NEW_BEACON message) | |
85 | * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface | |
86 | * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, | |
d03415e6 | 87 | * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. |
ed1b6cc7 JB |
88 | * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, |
89 | * parameters are like for %NL80211_CMD_SET_BEACON. | |
90 | * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it | |
91 | * | |
5727ef1b JB |
92 | * @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
93 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
94 | * @NL80211_CMD_SET_STATION: Set station attributes for station identified by | |
95 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
96 | * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the | |
97 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
98 | * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC | |
99 | * or, if no MAC address given, all stations, on the interface identified | |
100 | * by %NL80211_ATTR_IFINDEX. | |
101 | * | |
2ec600d6 LCC |
102 | * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
103 | * destination %NL80211_ATTR_MAC on the interface identified by | |
104 | * %NL80211_ATTR_IFINDEX. | |
105 | * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to | |
106 | * destination %NL80211_ATTR_MAC on the interface identified by | |
107 | * %NL80211_ATTR_IFINDEX. | |
108 | * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the | |
109 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
110 | * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC | |
111 | * or, if no MAC address given, all mesh paths, on the interface identified | |
112 | * by %NL80211_ATTR_IFINDEX. | |
9f1ba906 JM |
113 | * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
114 | * %NL80211_ATTR_IFINDEX. | |
2ec600d6 | 115 | * |
f130347c LR |
116 | * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set |
117 | * regulatory domain. | |
b2e1b302 LR |
118 | * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
119 | * after being queried by the kernel. CRDA replies by sending a regulatory | |
120 | * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our | |
121 | * current alpha2 if it found a match. It also provides | |
122 | * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each | |
123 | * regulatory rule is a nested set of attributes given by | |
124 | * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and | |
125 | * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by | |
126 | * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and | |
127 | * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. | |
128 | * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain | |
129 | * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will | |
130 | * store this as a valid request and then query userspace for it. | |
131 | * | |
93da9cc1 | 132 | * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the |
133 | * interface identified by %NL80211_ATTR_IFINDEX | |
134 | * | |
135 | * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the | |
136 | * interface identified by %NL80211_ATTR_IFINDEX | |
137 | * | |
9aed3cc1 JM |
138 | * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The |
139 | * interface is identified with %NL80211_ATTR_IFINDEX and the management | |
140 | * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be | |
141 | * added to the end of the specified management frame is specified with | |
142 | * %NL80211_ATTR_IE. If the command succeeds, the requested data will be | |
143 | * added to all specified management frames generated by | |
144 | * kernel/firmware/driver. | |
65fc73ac JM |
145 | * Note: This command has been removed and it is only reserved at this |
146 | * point to avoid re-using existing command number. The functionality this | |
147 | * command was planned for has been provided with cleaner design with the | |
148 | * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, | |
149 | * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, | |
150 | * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. | |
9aed3cc1 | 151 | * |
2a519311 JB |
152 | * @NL80211_CMD_GET_SCAN: get scan results |
153 | * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters | |
154 | * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to | |
155 | * NL80211_CMD_GET_SCAN and on the "scan" multicast group) | |
156 | * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, | |
157 | * partial scan results may be available | |
158 | * | |
73d54c9e LR |
159 | * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain |
160 | * has been changed and provides details of the request information | |
161 | * that caused the change such as who initiated the regulatory request | |
162 | * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx | |
163 | * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if | |
164 | * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or | |
165 | * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain | |
166 | * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is | |
167 | * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on | |
168 | * to (%NL80211_ATTR_REG_ALPHA2). | |
6bad8766 LR |
169 | * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon |
170 | * has been found while world roaming thus enabling active scan or | |
171 | * any mode of operation that initiates TX (beacons) on a channel | |
172 | * where we would not have been able to do either before. As an example | |
173 | * if you are world roaming (regulatory domain set to world or if your | |
174 | * driver is using a custom world roaming regulatory domain) and while | |
175 | * doing a passive scan on the 5 GHz band you find an AP there (if not | |
176 | * on a DFS channel) you will now be able to actively scan for that AP | |
177 | * or use AP mode on your card on that same channel. Note that this will | |
178 | * never be used for channels 1-11 on the 2 GHz band as they are always | |
179 | * enabled world wide. This beacon hint is only sent if your device had | |
180 | * either disabled active scanning or beaconing on a channel. We send to | |
181 | * userspace the wiphy on which we removed a restriction from | |
182 | * (%NL80211_ATTR_WIPHY) and the channel on which this occurred | |
183 | * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) | |
184 | * the beacon hint was processed. | |
73d54c9e | 185 | * |
636a5d36 JM |
186 | * @NL80211_CMD_AUTHENTICATE: authentication request and notification. |
187 | * This command is used both as a command (request to authenticate) and | |
188 | * as an event on the "mlme" multicast group indicating completion of the | |
189 | * authentication process. | |
190 | * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the | |
191 | * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and | |
192 | * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify | |
193 | * the SSID (mainly for association, but is included in authentication | |
194 | * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used | |
195 | * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE | |
196 | * is used to specify the authentication type. %NL80211_ATTR_IE is used to | |
197 | * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) | |
198 | * to be added to the frame. | |
199 | * When used as an event, this reports reception of an Authentication | |
6039f6d2 JM |
200 | * frame in station and IBSS modes when the local MLME processed the |
201 | * frame, i.e., it was for the local STA and was received in correct | |
202 | * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the | |
203 | * MLME SAP interface (kernel providing MLME, userspace SME). The | |
204 | * included NL80211_ATTR_FRAME attribute contains the management frame | |
205 | * (including both the header and frame body, but not FCS). | |
636a5d36 JM |
206 | * @NL80211_CMD_ASSOCIATE: association request and notification; like |
207 | * NL80211_CMD_AUTHENTICATE but for Association and Reassociation | |
208 | * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, | |
209 | * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). | |
210 | * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like | |
6039f6d2 | 211 | * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to |
636a5d36 JM |
212 | * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication |
213 | * primitives). | |
214 | * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like | |
6039f6d2 | 215 | * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to |
636a5d36 | 216 | * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). |
6039f6d2 | 217 | * |
a3b8b056 JM |
218 | * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael |
219 | * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the | |
220 | * event includes %NL80211_ATTR_MAC to describe the source MAC address of | |
221 | * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key | |
222 | * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and | |
223 | * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this | |
224 | * event matches with MLME-MICHAELMICFAILURE.indication() primitive | |
225 | * | |
55682965 JB |
226 | * @NL80211_CMD_MAX: highest used command number |
227 | * @__NL80211_CMD_AFTER_LAST: internal use | |
228 | */ | |
229 | enum nl80211_commands { | |
230 | /* don't change the order or add anything inbetween, this is ABI! */ | |
231 | NL80211_CMD_UNSPEC, | |
232 | ||
233 | NL80211_CMD_GET_WIPHY, /* can dump */ | |
234 | NL80211_CMD_SET_WIPHY, | |
235 | NL80211_CMD_NEW_WIPHY, | |
236 | NL80211_CMD_DEL_WIPHY, | |
237 | ||
238 | NL80211_CMD_GET_INTERFACE, /* can dump */ | |
239 | NL80211_CMD_SET_INTERFACE, | |
240 | NL80211_CMD_NEW_INTERFACE, | |
241 | NL80211_CMD_DEL_INTERFACE, | |
242 | ||
41ade00f JB |
243 | NL80211_CMD_GET_KEY, |
244 | NL80211_CMD_SET_KEY, | |
245 | NL80211_CMD_NEW_KEY, | |
246 | NL80211_CMD_DEL_KEY, | |
247 | ||
ed1b6cc7 JB |
248 | NL80211_CMD_GET_BEACON, |
249 | NL80211_CMD_SET_BEACON, | |
250 | NL80211_CMD_NEW_BEACON, | |
251 | NL80211_CMD_DEL_BEACON, | |
252 | ||
5727ef1b JB |
253 | NL80211_CMD_GET_STATION, |
254 | NL80211_CMD_SET_STATION, | |
255 | NL80211_CMD_NEW_STATION, | |
256 | NL80211_CMD_DEL_STATION, | |
257 | ||
2ec600d6 LCC |
258 | NL80211_CMD_GET_MPATH, |
259 | NL80211_CMD_SET_MPATH, | |
260 | NL80211_CMD_NEW_MPATH, | |
261 | NL80211_CMD_DEL_MPATH, | |
262 | ||
9f1ba906 JM |
263 | NL80211_CMD_SET_BSS, |
264 | ||
b2e1b302 LR |
265 | NL80211_CMD_SET_REG, |
266 | NL80211_CMD_REQ_SET_REG, | |
267 | ||
93da9cc1 | 268 | NL80211_CMD_GET_MESH_PARAMS, |
269 | NL80211_CMD_SET_MESH_PARAMS, | |
270 | ||
65fc73ac | 271 | NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, |
9aed3cc1 | 272 | |
f130347c LR |
273 | NL80211_CMD_GET_REG, |
274 | ||
2a519311 JB |
275 | NL80211_CMD_GET_SCAN, |
276 | NL80211_CMD_TRIGGER_SCAN, | |
277 | NL80211_CMD_NEW_SCAN_RESULTS, | |
278 | NL80211_CMD_SCAN_ABORTED, | |
279 | ||
73d54c9e LR |
280 | NL80211_CMD_REG_CHANGE, |
281 | ||
6039f6d2 JM |
282 | NL80211_CMD_AUTHENTICATE, |
283 | NL80211_CMD_ASSOCIATE, | |
284 | NL80211_CMD_DEAUTHENTICATE, | |
285 | NL80211_CMD_DISASSOCIATE, | |
286 | ||
a3b8b056 JM |
287 | NL80211_CMD_MICHAEL_MIC_FAILURE, |
288 | ||
6bad8766 LR |
289 | NL80211_CMD_REG_BEACON_HINT, |
290 | ||
b2e1b302 | 291 | /* add new commands above here */ |
564d9bdd | 292 | |
55682965 JB |
293 | /* used to define NL80211_CMD_MAX below */ |
294 | __NL80211_CMD_AFTER_LAST, | |
295 | NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 | |
296 | }; | |
297 | ||
9f1ba906 JM |
298 | /* |
299 | * Allow user space programs to use #ifdef on new commands by defining them | |
300 | * here | |
301 | */ | |
302 | #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS | |
9aed3cc1 | 303 | #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE |
73d54c9e | 304 | #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE |
6039f6d2 JM |
305 | #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE |
306 | #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE | |
307 | #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE | |
308 | #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE | |
6bad8766 | 309 | #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT |
73d54c9e | 310 | |
55682965 JB |
311 | /** |
312 | * enum nl80211_attrs - nl80211 netlink attributes | |
313 | * | |
314 | * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors | |
315 | * | |
316 | * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. | |
317 | * /sys/class/ieee80211/<phyname>/index | |
318 | * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) | |
31888487 | 319 | * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
72bdcf34 | 320 | * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz |
094d05dc | 321 | * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
72bdcf34 | 322 | * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): |
094d05dc | 323 | * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including |
72bdcf34 | 324 | * this attribute) |
094d05dc S |
325 | * NL80211_CHAN_HT20 = HT20 only |
326 | * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel | |
327 | * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel | |
55682965 JB |
328 | * |
329 | * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on | |
330 | * @NL80211_ATTR_IFNAME: network interface name | |
331 | * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype | |
332 | * | |
41ade00f JB |
333 | * @NL80211_ATTR_MAC: MAC address (various uses) |
334 | * | |
335 | * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of | |
336 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
337 | * keys | |
338 | * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) | |
339 | * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
340 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
341 | * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
342 | * CCMP keys, each six bytes in little endian | |
343 | * | |
ed1b6cc7 JB |
344 | * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
345 | * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing | |
346 | * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE | |
347 | * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE | |
348 | * | |
5727ef1b JB |
349 | * @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
350 | * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of | |
351 | * &enum nl80211_sta_flags. | |
352 | * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by | |
353 | * IEEE 802.11 7.3.1.6 (u16). | |
354 | * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported | |
355 | * rates as defined by IEEE 802.11 7.3.2.2 but without the length | |
356 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
357 | * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station | |
358 | * to, or the AP interface the station was originally added to to. | |
2ec600d6 | 359 | * @NL80211_ATTR_STA_INFO: information about a station, part of station info |
fd5b74dc | 360 | * given for %NL80211_CMD_GET_STATION, nested attribute containing |
2ec600d6 | 361 | * info as possible, see &enum nl80211_sta_info. |
5727ef1b | 362 | * |
ee688b00 JB |
363 | * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
364 | * consisting of a nested array. | |
365 | * | |
2ec600d6 LCC |
366 | * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
367 | * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link. | |
368 | * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. | |
369 | * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path | |
370 | * info given for %NL80211_CMD_GET_MPATH, nested attribute described at | |
371 | * &enum nl80211_mpath_info. | |
372 | * | |
66f7ac50 MW |
373 | * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
374 | * &enum nl80211_mntr_flags. | |
375 | * | |
b2e1b302 LR |
376 | * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
377 | * current regulatory domain should be set to or is already set to. | |
378 | * For example, 'CR', for Costa Rica. This attribute is used by the kernel | |
379 | * to query the CRDA to retrieve one regulatory domain. This attribute can | |
380 | * also be used by userspace to query the kernel for the currently set | |
381 | * regulatory domain. We chose an alpha2 as that is also used by the | |
382 | * IEEE-802.11d country information element to identify a country. | |
383 | * Users can also simply ask the wireless core to set regulatory domain | |
384 | * to a specific alpha2. | |
385 | * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory | |
386 | * rules. | |
387 | * | |
9f1ba906 JM |
388 | * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
389 | * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled | |
390 | * (u8, 0 or 1) | |
391 | * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled | |
392 | * (u8, 0 or 1) | |
90c97a04 JM |
393 | * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
394 | * rates in format defined by IEEE 802.11 7.3.2.2 but without the length | |
395 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
9f1ba906 | 396 | * |
36aedc90 JM |
397 | * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
398 | * association request when used with NL80211_CMD_NEW_STATION) | |
399 | * | |
f59ac048 LR |
400 | * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
401 | * supported interface types, each a flag attribute with the number | |
402 | * of the interface mode. | |
403 | * | |
9aed3cc1 JM |
404 | * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for |
405 | * %NL80211_CMD_SET_MGMT_EXTRA_IE. | |
406 | * | |
407 | * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with | |
408 | * %NL80211_CMD_SET_MGMT_EXTRA_IE). | |
409 | * | |
2a519311 JB |
410 | * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with |
411 | * a single scan request, a wiphy attribute. | |
18a83659 JB |
412 | * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements |
413 | * that can be added to a scan request | |
2a519311 JB |
414 | * |
415 | * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) | |
416 | * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive | |
417 | * scanning and include a zero-length SSID (wildcard) for wildcard scan | |
418 | * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the | |
419 | * scan result list changes (BSS expired or added) so that applications | |
420 | * can verify that they got a single, consistent snapshot (when all dump | |
421 | * messages carried the same generation number) | |
422 | * @NL80211_ATTR_BSS: scan result BSS | |
423 | * | |
73d54c9e LR |
424 | * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain |
425 | * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* | |
426 | * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently | |
427 | * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) | |
428 | * | |
8fdc621d JB |
429 | * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies |
430 | * an array of command numbers (i.e. a mapping index to command number) | |
431 | * that the driver for the given wiphy supports. | |
432 | * | |
6039f6d2 JM |
433 | * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header |
434 | * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and | |
435 | * NL80211_CMD_ASSOCIATE events | |
636a5d36 JM |
436 | * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) |
437 | * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, | |
438 | * represented as a u32 | |
439 | * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and | |
440 | * %NL80211_CMD_DISASSOCIATE, u16 | |
6039f6d2 | 441 | * |
a3b8b056 JM |
442 | * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as |
443 | * a u32 | |
444 | * | |
6bad8766 LR |
445 | * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change |
446 | * due to considerations from a beacon hint. This attribute reflects | |
447 | * the state of the channel _before_ the beacon hint processing. This | |
448 | * attributes consists of a nested attribute containing | |
449 | * NL80211_FREQUENCY_ATTR_* | |
450 | * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change | |
451 | * due to considerations from a beacon hint. This attribute reflects | |
452 | * the state of the channel _after_ the beacon hint processing. This | |
453 | * attributes consists of a nested attribute containing | |
454 | * NL80211_FREQUENCY_ATTR_* | |
455 | * | |
55682965 JB |
456 | * @NL80211_ATTR_MAX: highest attribute number currently defined |
457 | * @__NL80211_ATTR_AFTER_LAST: internal use | |
458 | */ | |
459 | enum nl80211_attrs { | |
460 | /* don't change the order or add anything inbetween, this is ABI! */ | |
461 | NL80211_ATTR_UNSPEC, | |
462 | ||
463 | NL80211_ATTR_WIPHY, | |
464 | NL80211_ATTR_WIPHY_NAME, | |
465 | ||
466 | NL80211_ATTR_IFINDEX, | |
467 | NL80211_ATTR_IFNAME, | |
468 | NL80211_ATTR_IFTYPE, | |
469 | ||
41ade00f JB |
470 | NL80211_ATTR_MAC, |
471 | ||
472 | NL80211_ATTR_KEY_DATA, | |
473 | NL80211_ATTR_KEY_IDX, | |
474 | NL80211_ATTR_KEY_CIPHER, | |
475 | NL80211_ATTR_KEY_SEQ, | |
476 | NL80211_ATTR_KEY_DEFAULT, | |
477 | ||
ed1b6cc7 JB |
478 | NL80211_ATTR_BEACON_INTERVAL, |
479 | NL80211_ATTR_DTIM_PERIOD, | |
480 | NL80211_ATTR_BEACON_HEAD, | |
481 | NL80211_ATTR_BEACON_TAIL, | |
482 | ||
5727ef1b JB |
483 | NL80211_ATTR_STA_AID, |
484 | NL80211_ATTR_STA_FLAGS, | |
485 | NL80211_ATTR_STA_LISTEN_INTERVAL, | |
486 | NL80211_ATTR_STA_SUPPORTED_RATES, | |
487 | NL80211_ATTR_STA_VLAN, | |
2ec600d6 | 488 | NL80211_ATTR_STA_INFO, |
5727ef1b | 489 | |
ee688b00 JB |
490 | NL80211_ATTR_WIPHY_BANDS, |
491 | ||
66f7ac50 MW |
492 | NL80211_ATTR_MNTR_FLAGS, |
493 | ||
2ec600d6 LCC |
494 | NL80211_ATTR_MESH_ID, |
495 | NL80211_ATTR_STA_PLINK_ACTION, | |
496 | NL80211_ATTR_MPATH_NEXT_HOP, | |
497 | NL80211_ATTR_MPATH_INFO, | |
498 | ||
9f1ba906 JM |
499 | NL80211_ATTR_BSS_CTS_PROT, |
500 | NL80211_ATTR_BSS_SHORT_PREAMBLE, | |
501 | NL80211_ATTR_BSS_SHORT_SLOT_TIME, | |
502 | ||
36aedc90 JM |
503 | NL80211_ATTR_HT_CAPABILITY, |
504 | ||
f59ac048 LR |
505 | NL80211_ATTR_SUPPORTED_IFTYPES, |
506 | ||
b2e1b302 LR |
507 | NL80211_ATTR_REG_ALPHA2, |
508 | NL80211_ATTR_REG_RULES, | |
509 | ||
93da9cc1 | 510 | NL80211_ATTR_MESH_PARAMS, |
511 | ||
90c97a04 JM |
512 | NL80211_ATTR_BSS_BASIC_RATES, |
513 | ||
31888487 | 514 | NL80211_ATTR_WIPHY_TXQ_PARAMS, |
72bdcf34 | 515 | NL80211_ATTR_WIPHY_FREQ, |
094d05dc | 516 | NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
31888487 | 517 | |
3cfcf6ac JM |
518 | NL80211_ATTR_KEY_DEFAULT_MGMT, |
519 | ||
9aed3cc1 JM |
520 | NL80211_ATTR_MGMT_SUBTYPE, |
521 | NL80211_ATTR_IE, | |
522 | ||
2a519311 JB |
523 | NL80211_ATTR_MAX_NUM_SCAN_SSIDS, |
524 | ||
525 | NL80211_ATTR_SCAN_FREQUENCIES, | |
526 | NL80211_ATTR_SCAN_SSIDS, | |
527 | NL80211_ATTR_SCAN_GENERATION, | |
528 | NL80211_ATTR_BSS, | |
529 | ||
73d54c9e LR |
530 | NL80211_ATTR_REG_INITIATOR, |
531 | NL80211_ATTR_REG_TYPE, | |
532 | ||
8fdc621d JB |
533 | NL80211_ATTR_SUPPORTED_COMMANDS, |
534 | ||
6039f6d2 | 535 | NL80211_ATTR_FRAME, |
636a5d36 JM |
536 | NL80211_ATTR_SSID, |
537 | NL80211_ATTR_AUTH_TYPE, | |
538 | NL80211_ATTR_REASON_CODE, | |
6039f6d2 | 539 | |
a3b8b056 JM |
540 | NL80211_ATTR_KEY_TYPE, |
541 | ||
18a83659 JB |
542 | NL80211_ATTR_MAX_SCAN_IE_LEN, |
543 | ||
6bad8766 LR |
544 | NL80211_ATTR_FREQ_BEFORE, |
545 | NL80211_ATTR_FREQ_AFTER, | |
564d9bdd MB |
546 | /* add attributes here, update the policy in nl80211.c */ |
547 | ||
55682965 JB |
548 | __NL80211_ATTR_AFTER_LAST, |
549 | NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 | |
550 | }; | |
551 | ||
36aedc90 JM |
552 | /* |
553 | * Allow user space programs to use #ifdef on new attributes by defining them | |
554 | * here | |
555 | */ | |
556 | #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY | |
90c97a04 | 557 | #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
31888487 | 558 | #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
72bdcf34 | 559 | #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ |
d03415e6 | 560 | #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE |
9aed3cc1 JM |
561 | #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE |
562 | #define NL80211_ATTR_IE NL80211_ATTR_IE | |
73d54c9e LR |
563 | #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR |
564 | #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE | |
6039f6d2 | 565 | #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME |
636a5d36 JM |
566 | #define NL80211_ATTR_SSID NL80211_ATTR_SSID |
567 | #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE | |
568 | #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE | |
36aedc90 | 569 | |
ffd7891d | 570 | #define NL80211_MAX_SUPP_RATES 32 |
b2e1b302 | 571 | #define NL80211_MAX_SUPP_REG_RULES 32 |
ffd7891d LR |
572 | #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
573 | #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 | |
574 | #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 | |
36aedc90 | 575 | #define NL80211_HT_CAPABILITY_LEN 26 |
5727ef1b | 576 | |
704232c2 JB |
577 | /** |
578 | * enum nl80211_iftype - (virtual) interface types | |
55682965 | 579 | * |
704232c2 JB |
580 | * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
581 | * @NL80211_IFTYPE_ADHOC: independent BSS member | |
582 | * @NL80211_IFTYPE_STATION: managed BSS member | |
583 | * @NL80211_IFTYPE_AP: access point | |
584 | * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points | |
585 | * @NL80211_IFTYPE_WDS: wireless distribution interface | |
586 | * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames | |
2ec600d6 | 587 | * @NL80211_IFTYPE_MESH_POINT: mesh point |
55682965 | 588 | * @NL80211_IFTYPE_MAX: highest interface type number currently defined |
704232c2 JB |
589 | * @__NL80211_IFTYPE_AFTER_LAST: internal use |
590 | * | |
55682965 | 591 | * These values are used with the %NL80211_ATTR_IFTYPE |
704232c2 JB |
592 | * to set the type of an interface. |
593 | * | |
594 | */ | |
595 | enum nl80211_iftype { | |
596 | NL80211_IFTYPE_UNSPECIFIED, | |
597 | NL80211_IFTYPE_ADHOC, | |
598 | NL80211_IFTYPE_STATION, | |
599 | NL80211_IFTYPE_AP, | |
600 | NL80211_IFTYPE_AP_VLAN, | |
601 | NL80211_IFTYPE_WDS, | |
602 | NL80211_IFTYPE_MONITOR, | |
2ec600d6 | 603 | NL80211_IFTYPE_MESH_POINT, |
704232c2 JB |
604 | |
605 | /* keep last */ | |
55682965 JB |
606 | __NL80211_IFTYPE_AFTER_LAST, |
607 | NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 | |
704232c2 | 608 | }; |
704232c2 | 609 | |
5727ef1b JB |
610 | /** |
611 | * enum nl80211_sta_flags - station flags | |
612 | * | |
613 | * Station flags. When a station is added to an AP interface, it is | |
614 | * assumed to be already associated (and hence authenticated.) | |
615 | * | |
616 | * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) | |
617 | * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames | |
618 | * with short barker preamble | |
619 | * @NL80211_STA_FLAG_WME: station is WME/QoS capable | |
5394af4d | 620 | * @NL80211_STA_FLAG_MFP: station uses management frame protection |
5727ef1b JB |
621 | */ |
622 | enum nl80211_sta_flags { | |
623 | __NL80211_STA_FLAG_INVALID, | |
624 | NL80211_STA_FLAG_AUTHORIZED, | |
625 | NL80211_STA_FLAG_SHORT_PREAMBLE, | |
626 | NL80211_STA_FLAG_WME, | |
5394af4d | 627 | NL80211_STA_FLAG_MFP, |
5727ef1b JB |
628 | |
629 | /* keep last */ | |
630 | __NL80211_STA_FLAG_AFTER_LAST, | |
631 | NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 | |
632 | }; | |
633 | ||
420e7fab HR |
634 | /** |
635 | * enum nl80211_rate_info - bitrate information | |
636 | * | |
637 | * These attribute types are used with %NL80211_STA_INFO_TXRATE | |
638 | * when getting information about the bitrate of a station. | |
639 | * | |
640 | * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved | |
641 | * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) | |
642 | * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) | |
643 | * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate | |
644 | * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval | |
645 | * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined | |
646 | * @__NL80211_RATE_INFO_AFTER_LAST: internal use | |
647 | */ | |
648 | enum nl80211_rate_info { | |
649 | __NL80211_RATE_INFO_INVALID, | |
650 | NL80211_RATE_INFO_BITRATE, | |
651 | NL80211_RATE_INFO_MCS, | |
652 | NL80211_RATE_INFO_40_MHZ_WIDTH, | |
653 | NL80211_RATE_INFO_SHORT_GI, | |
654 | ||
655 | /* keep last */ | |
656 | __NL80211_RATE_INFO_AFTER_LAST, | |
657 | NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 | |
658 | }; | |
659 | ||
fd5b74dc | 660 | /** |
2ec600d6 | 661 | * enum nl80211_sta_info - station information |
fd5b74dc | 662 | * |
2ec600d6 | 663 | * These attribute types are used with %NL80211_ATTR_STA_INFO |
fd5b74dc JB |
664 | * when getting information about a station. |
665 | * | |
2ec600d6 LCC |
666 | * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
667 | * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) | |
668 | * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) | |
669 | * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) | |
670 | * @__NL80211_STA_INFO_AFTER_LAST: internal | |
671 | * @NL80211_STA_INFO_MAX: highest possible station info attribute | |
420e7fab HR |
672 | * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) |
673 | * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute | |
674 | * containing info as possible, see &enum nl80211_sta_info_txrate. | |
98c8a60a JM |
675 | * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) |
676 | * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this | |
677 | * station) | |
2ec600d6 LCC |
678 | */ |
679 | enum nl80211_sta_info { | |
680 | __NL80211_STA_INFO_INVALID, | |
681 | NL80211_STA_INFO_INACTIVE_TIME, | |
682 | NL80211_STA_INFO_RX_BYTES, | |
683 | NL80211_STA_INFO_TX_BYTES, | |
684 | NL80211_STA_INFO_LLID, | |
685 | NL80211_STA_INFO_PLID, | |
686 | NL80211_STA_INFO_PLINK_STATE, | |
420e7fab HR |
687 | NL80211_STA_INFO_SIGNAL, |
688 | NL80211_STA_INFO_TX_BITRATE, | |
98c8a60a JM |
689 | NL80211_STA_INFO_RX_PACKETS, |
690 | NL80211_STA_INFO_TX_PACKETS, | |
2ec600d6 LCC |
691 | |
692 | /* keep last */ | |
693 | __NL80211_STA_INFO_AFTER_LAST, | |
694 | NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 | |
695 | }; | |
696 | ||
697 | /** | |
698 | * enum nl80211_mpath_flags - nl80211 mesh path flags | |
699 | * | |
700 | * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active | |
701 | * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running | |
702 | * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN | |
703 | * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set | |
704 | * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded | |
705 | */ | |
706 | enum nl80211_mpath_flags { | |
707 | NL80211_MPATH_FLAG_ACTIVE = 1<<0, | |
708 | NL80211_MPATH_FLAG_RESOLVING = 1<<1, | |
709 | NL80211_MPATH_FLAG_DSN_VALID = 1<<2, | |
710 | NL80211_MPATH_FLAG_FIXED = 1<<3, | |
711 | NL80211_MPATH_FLAG_RESOLVED = 1<<4, | |
712 | }; | |
713 | ||
714 | /** | |
715 | * enum nl80211_mpath_info - mesh path information | |
716 | * | |
717 | * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting | |
718 | * information about a mesh path. | |
719 | * | |
720 | * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved | |
721 | * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination | |
722 | * @NL80211_ATTR_MPATH_DSN: destination sequence number | |
723 | * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path | |
724 | * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now | |
725 | * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in | |
726 | * &enum nl80211_mpath_flags; | |
727 | * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec | |
728 | * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries | |
fd5b74dc | 729 | */ |
2ec600d6 LCC |
730 | enum nl80211_mpath_info { |
731 | __NL80211_MPATH_INFO_INVALID, | |
732 | NL80211_MPATH_INFO_FRAME_QLEN, | |
733 | NL80211_MPATH_INFO_DSN, | |
734 | NL80211_MPATH_INFO_METRIC, | |
735 | NL80211_MPATH_INFO_EXPTIME, | |
736 | NL80211_MPATH_INFO_FLAGS, | |
737 | NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, | |
738 | NL80211_MPATH_INFO_DISCOVERY_RETRIES, | |
fd5b74dc JB |
739 | |
740 | /* keep last */ | |
2ec600d6 LCC |
741 | __NL80211_MPATH_INFO_AFTER_LAST, |
742 | NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 | |
fd5b74dc JB |
743 | }; |
744 | ||
ee688b00 JB |
745 | /** |
746 | * enum nl80211_band_attr - band attributes | |
747 | * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved | |
748 | * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, | |
749 | * an array of nested frequency attributes | |
750 | * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, | |
751 | * an array of nested bitrate attributes | |
d51626df JB |
752 | * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
753 | * defined in 802.11n | |
754 | * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE | |
755 | * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n | |
756 | * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n | |
ee688b00 JB |
757 | */ |
758 | enum nl80211_band_attr { | |
759 | __NL80211_BAND_ATTR_INVALID, | |
760 | NL80211_BAND_ATTR_FREQS, | |
761 | NL80211_BAND_ATTR_RATES, | |
762 | ||
d51626df JB |
763 | NL80211_BAND_ATTR_HT_MCS_SET, |
764 | NL80211_BAND_ATTR_HT_CAPA, | |
765 | NL80211_BAND_ATTR_HT_AMPDU_FACTOR, | |
766 | NL80211_BAND_ATTR_HT_AMPDU_DENSITY, | |
767 | ||
ee688b00 JB |
768 | /* keep last */ |
769 | __NL80211_BAND_ATTR_AFTER_LAST, | |
770 | NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 | |
771 | }; | |
772 | ||
d51626df JB |
773 | #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
774 | ||
ee688b00 JB |
775 | /** |
776 | * enum nl80211_frequency_attr - frequency attributes | |
777 | * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz | |
778 | * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current | |
779 | * regulatory domain. | |
780 | * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is | |
781 | * permitted on this channel in current regulatory domain. | |
782 | * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted | |
783 | * on this channel in current regulatory domain. | |
784 | * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory | |
785 | * on this channel in current regulatory domain. | |
bf8c1ac6 JM |
786 | * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
787 | * (100 * dBm). | |
ee688b00 JB |
788 | */ |
789 | enum nl80211_frequency_attr { | |
790 | __NL80211_FREQUENCY_ATTR_INVALID, | |
791 | NL80211_FREQUENCY_ATTR_FREQ, | |
792 | NL80211_FREQUENCY_ATTR_DISABLED, | |
793 | NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, | |
794 | NL80211_FREQUENCY_ATTR_NO_IBSS, | |
795 | NL80211_FREQUENCY_ATTR_RADAR, | |
e2f367f2 | 796 | NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
ee688b00 JB |
797 | |
798 | /* keep last */ | |
799 | __NL80211_FREQUENCY_ATTR_AFTER_LAST, | |
800 | NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 | |
801 | }; | |
802 | ||
e2f367f2 JM |
803 | #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
804 | ||
ee688b00 JB |
805 | /** |
806 | * enum nl80211_bitrate_attr - bitrate attributes | |
807 | * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps | |
808 | * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported | |
809 | * in 2.4 GHz band. | |
810 | */ | |
811 | enum nl80211_bitrate_attr { | |
812 | __NL80211_BITRATE_ATTR_INVALID, | |
813 | NL80211_BITRATE_ATTR_RATE, | |
814 | NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, | |
815 | ||
816 | /* keep last */ | |
817 | __NL80211_BITRATE_ATTR_AFTER_LAST, | |
818 | NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 | |
819 | }; | |
820 | ||
7db90f4a LR |
821 | /** |
822 | * enum nl80211_initiator - Indicates the initiator of a reg domain request | |
823 | * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world | |
824 | * regulatory domain. | |
825 | * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the | |
826 | * regulatory domain. | |
827 | * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the | |
828 | * wireless core it thinks its knows the regulatory domain we should be in. | |
829 | * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an | |
830 | * 802.11 country information element with regulatory information it | |
831 | * thinks we should consider. | |
832 | */ | |
833 | enum nl80211_reg_initiator { | |
834 | NL80211_REGDOM_SET_BY_CORE, | |
835 | NL80211_REGDOM_SET_BY_USER, | |
836 | NL80211_REGDOM_SET_BY_DRIVER, | |
837 | NL80211_REGDOM_SET_BY_COUNTRY_IE, | |
838 | }; | |
839 | ||
73d54c9e LR |
840 | /** |
841 | * enum nl80211_reg_type - specifies the type of regulatory domain | |
842 | * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains | |
843 | * to a specific country. When this is set you can count on the | |
844 | * ISO / IEC 3166 alpha2 country code being valid. | |
845 | * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory | |
846 | * domain. | |
847 | * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom | |
848 | * driver specific world regulatory domain. These do not apply system-wide | |
849 | * and are only applicable to the individual devices which have requested | |
850 | * them to be applied. | |
851 | * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product | |
852 | * of an intersection between two regulatory domains -- the previously | |
853 | * set regulatory domain on the system and the last accepted regulatory | |
854 | * domain request to be processed. | |
855 | */ | |
856 | enum nl80211_reg_type { | |
857 | NL80211_REGDOM_TYPE_COUNTRY, | |
858 | NL80211_REGDOM_TYPE_WORLD, | |
859 | NL80211_REGDOM_TYPE_CUSTOM_WORLD, | |
860 | NL80211_REGDOM_TYPE_INTERSECTION, | |
861 | }; | |
862 | ||
b2e1b302 LR |
863 | /** |
864 | * enum nl80211_reg_rule_attr - regulatory rule attributes | |
865 | * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional | |
866 | * considerations for a given frequency range. These are the | |
867 | * &enum nl80211_reg_rule_flags. | |
868 | * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory | |
869 | * rule in KHz. This is not a center of frequency but an actual regulatory | |
870 | * band edge. | |
871 | * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule | |
872 | * in KHz. This is not a center a frequency but an actual regulatory | |
873 | * band edge. | |
874 | * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this | |
875 | * frequency range, in KHz. | |
876 | * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain | |
877 | * for a given frequency range. The value is in mBi (100 * dBi). | |
878 | * If you don't have one then don't send this. | |
879 | * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for | |
880 | * a given frequency range. The value is in mBm (100 * dBm). | |
881 | */ | |
882 | enum nl80211_reg_rule_attr { | |
883 | __NL80211_REG_RULE_ATTR_INVALID, | |
884 | NL80211_ATTR_REG_RULE_FLAGS, | |
885 | ||
886 | NL80211_ATTR_FREQ_RANGE_START, | |
887 | NL80211_ATTR_FREQ_RANGE_END, | |
888 | NL80211_ATTR_FREQ_RANGE_MAX_BW, | |
889 | ||
890 | NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, | |
891 | NL80211_ATTR_POWER_RULE_MAX_EIRP, | |
892 | ||
893 | /* keep last */ | |
894 | __NL80211_REG_RULE_ATTR_AFTER_LAST, | |
895 | NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 | |
896 | }; | |
897 | ||
898 | /** | |
899 | * enum nl80211_reg_rule_flags - regulatory rule flags | |
900 | * | |
901 | * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed | |
902 | * @NL80211_RRF_NO_CCK: CCK modulation not allowed | |
903 | * @NL80211_RRF_NO_INDOOR: indoor operation not allowed | |
904 | * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed | |
905 | * @NL80211_RRF_DFS: DFS support is required to be used | |
906 | * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links | |
907 | * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links | |
908 | * @NL80211_RRF_PASSIVE_SCAN: passive scan is required | |
909 | * @NL80211_RRF_NO_IBSS: no IBSS is allowed | |
910 | */ | |
911 | enum nl80211_reg_rule_flags { | |
912 | NL80211_RRF_NO_OFDM = 1<<0, | |
913 | NL80211_RRF_NO_CCK = 1<<1, | |
914 | NL80211_RRF_NO_INDOOR = 1<<2, | |
915 | NL80211_RRF_NO_OUTDOOR = 1<<3, | |
916 | NL80211_RRF_DFS = 1<<4, | |
917 | NL80211_RRF_PTP_ONLY = 1<<5, | |
918 | NL80211_RRF_PTMP_ONLY = 1<<6, | |
919 | NL80211_RRF_PASSIVE_SCAN = 1<<7, | |
920 | NL80211_RRF_NO_IBSS = 1<<8, | |
921 | }; | |
922 | ||
66f7ac50 MW |
923 | /** |
924 | * enum nl80211_mntr_flags - monitor configuration flags | |
925 | * | |
926 | * Monitor configuration flags. | |
927 | * | |
928 | * @__NL80211_MNTR_FLAG_INVALID: reserved | |
929 | * | |
930 | * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS | |
931 | * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP | |
932 | * @NL80211_MNTR_FLAG_CONTROL: pass control frames | |
933 | * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering | |
934 | * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. | |
935 | * overrides all other flags. | |
936 | * | |
937 | * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use | |
938 | * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag | |
939 | */ | |
940 | enum nl80211_mntr_flags { | |
941 | __NL80211_MNTR_FLAG_INVALID, | |
942 | NL80211_MNTR_FLAG_FCSFAIL, | |
943 | NL80211_MNTR_FLAG_PLCPFAIL, | |
944 | NL80211_MNTR_FLAG_CONTROL, | |
945 | NL80211_MNTR_FLAG_OTHER_BSS, | |
946 | NL80211_MNTR_FLAG_COOK_FRAMES, | |
947 | ||
948 | /* keep last */ | |
949 | __NL80211_MNTR_FLAG_AFTER_LAST, | |
950 | NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 | |
951 | }; | |
952 | ||
93da9cc1 | 953 | /** |
954 | * enum nl80211_meshconf_params - mesh configuration parameters | |
955 | * | |
956 | * Mesh configuration parameters | |
957 | * | |
958 | * @__NL80211_MESHCONF_INVALID: internal use | |
959 | * | |
960 | * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in | |
961 | * millisecond units, used by the Peer Link Open message | |
962 | * | |
963 | * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in | |
964 | * millisecond units, used by the peer link management to close a peer link | |
965 | * | |
966 | * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in | |
967 | * millisecond units | |
968 | * | |
969 | * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed | |
970 | * on this mesh interface | |
971 | * | |
972 | * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link | |
973 | * open retries that can be sent to establish a new peer link instance in a | |
974 | * mesh | |
975 | * | |
976 | * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh | |
977 | * point. | |
978 | * | |
979 | * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically | |
980 | * open peer links when we detect compatible mesh peers. | |
981 | * | |
982 | * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames | |
983 | * containing a PREQ that an MP can send to a particular destination (path | |
984 | * target) | |
985 | * | |
986 | * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths | |
987 | * (in milliseconds) | |
988 | * | |
989 | * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait | |
990 | * until giving up on a path discovery (in milliseconds) | |
991 | * | |
992 | * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh | |
993 | * points receiving a PREQ shall consider the forwarding information from the | |
994 | * root to be valid. (TU = time unit) | |
995 | * | |
996 | * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in | |
997 | * TUs) during which an MP can send only one action frame containing a PREQ | |
998 | * reference element | |
999 | * | |
1000 | * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) | |
1001 | * that it takes for an HWMP information element to propagate across the mesh | |
1002 | * | |
1003 | * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute | |
1004 | * | |
1005 | * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use | |
1006 | */ | |
1007 | enum nl80211_meshconf_params { | |
1008 | __NL80211_MESHCONF_INVALID, | |
1009 | NL80211_MESHCONF_RETRY_TIMEOUT, | |
1010 | NL80211_MESHCONF_CONFIRM_TIMEOUT, | |
1011 | NL80211_MESHCONF_HOLDING_TIMEOUT, | |
1012 | NL80211_MESHCONF_MAX_PEER_LINKS, | |
1013 | NL80211_MESHCONF_MAX_RETRIES, | |
1014 | NL80211_MESHCONF_TTL, | |
1015 | NL80211_MESHCONF_AUTO_OPEN_PLINKS, | |
1016 | NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, | |
1017 | NL80211_MESHCONF_PATH_REFRESH_TIME, | |
1018 | NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, | |
1019 | NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, | |
1020 | NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, | |
1021 | NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | |
1022 | ||
1023 | /* keep last */ | |
1024 | __NL80211_MESHCONF_ATTR_AFTER_LAST, | |
1025 | NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 | |
1026 | }; | |
1027 | ||
31888487 JM |
1028 | /** |
1029 | * enum nl80211_txq_attr - TX queue parameter attributes | |
1030 | * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved | |
1031 | * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) | |
1032 | * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning | |
1033 | * disabled | |
1034 | * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form | |
1035 | * 2^n-1 in the range 1..32767] | |
1036 | * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form | |
1037 | * 2^n-1 in the range 1..32767] | |
1038 | * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] | |
1039 | * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal | |
1040 | * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number | |
1041 | */ | |
1042 | enum nl80211_txq_attr { | |
1043 | __NL80211_TXQ_ATTR_INVALID, | |
1044 | NL80211_TXQ_ATTR_QUEUE, | |
1045 | NL80211_TXQ_ATTR_TXOP, | |
1046 | NL80211_TXQ_ATTR_CWMIN, | |
1047 | NL80211_TXQ_ATTR_CWMAX, | |
1048 | NL80211_TXQ_ATTR_AIFS, | |
1049 | ||
1050 | /* keep last */ | |
1051 | __NL80211_TXQ_ATTR_AFTER_LAST, | |
1052 | NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 | |
1053 | }; | |
1054 | ||
1055 | enum nl80211_txq_q { | |
1056 | NL80211_TXQ_Q_VO, | |
1057 | NL80211_TXQ_Q_VI, | |
1058 | NL80211_TXQ_Q_BE, | |
1059 | NL80211_TXQ_Q_BK | |
1060 | }; | |
1061 | ||
094d05dc S |
1062 | enum nl80211_channel_type { |
1063 | NL80211_CHAN_NO_HT, | |
1064 | NL80211_CHAN_HT20, | |
1065 | NL80211_CHAN_HT40MINUS, | |
1066 | NL80211_CHAN_HT40PLUS | |
72bdcf34 | 1067 | }; |
2a519311 JB |
1068 | |
1069 | /** | |
1070 | * enum nl80211_bss - netlink attributes for a BSS | |
1071 | * | |
1072 | * @__NL80211_BSS_INVALID: invalid | |
1073 | * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) | |
1074 | * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) | |
1075 | * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) | |
1076 | * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) | |
1077 | * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the | |
1078 | * raw information elements from the probe response/beacon (bin) | |
1079 | * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon | |
1080 | * in mBm (100 * dBm) (s32) | |
1081 | * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon | |
1082 | * in unspecified units, scaled to 0..100 (u8) | |
1083 | * @__NL80211_BSS_AFTER_LAST: internal | |
1084 | * @NL80211_BSS_MAX: highest BSS attribute | |
1085 | */ | |
1086 | enum nl80211_bss { | |
1087 | __NL80211_BSS_INVALID, | |
1088 | NL80211_BSS_BSSID, | |
1089 | NL80211_BSS_FREQUENCY, | |
1090 | NL80211_BSS_TSF, | |
1091 | NL80211_BSS_BEACON_INTERVAL, | |
1092 | NL80211_BSS_CAPABILITY, | |
1093 | NL80211_BSS_INFORMATION_ELEMENTS, | |
1094 | NL80211_BSS_SIGNAL_MBM, | |
1095 | NL80211_BSS_SIGNAL_UNSPEC, | |
1096 | ||
1097 | /* keep last */ | |
1098 | __NL80211_BSS_AFTER_LAST, | |
1099 | NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 | |
1100 | }; | |
1101 | ||
636a5d36 JM |
1102 | /** |
1103 | * enum nl80211_auth_type - AuthenticationType | |
1104 | * | |
1105 | * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication | |
1106 | * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) | |
1107 | * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) | |
1108 | * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) | |
1109 | */ | |
1110 | enum nl80211_auth_type { | |
1111 | NL80211_AUTHTYPE_OPEN_SYSTEM, | |
1112 | NL80211_AUTHTYPE_SHARED_KEY, | |
1113 | NL80211_AUTHTYPE_FT, | |
1114 | NL80211_AUTHTYPE_NETWORK_EAP, | |
1115 | }; | |
a3b8b056 JM |
1116 | |
1117 | /** | |
1118 | * enum nl80211_key_type - Key Type | |
1119 | * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key | |
1120 | * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key | |
1121 | * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) | |
1122 | */ | |
1123 | enum nl80211_key_type { | |
1124 | NL80211_KEYTYPE_GROUP, | |
1125 | NL80211_KEYTYPE_PAIRWISE, | |
1126 | NL80211_KEYTYPE_PEERKEY, | |
1127 | }; | |
1128 | ||
704232c2 | 1129 | #endif /* __LINUX_NL80211_H */ |