]>
Commit | Line | Data |
---|---|---|
82a56f0d LC |
1 | HXCOMM QMP dispatch table and documentation |
2 | HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and | |
3 | HXCOMM does not show up in the other formats. | |
4 | ||
5 | SQMP | |
6 | QMP Supported Commands | |
7 | ---------------------- | |
8 | ||
9 | This document describes all commands currently supported by QMP. | |
10 | ||
11 | Most of the time their usage is exactly the same as in the user Monitor, this | |
12 | means that any other document which also describe commands (the manpage, | |
13 | QEMU's manual, etc) can and should be consulted. | |
14 | ||
15 | QMP has two types of commands: regular and query commands. Regular commands | |
16 | usually change the Virtual Machine's state someway, while query commands just | |
17 | return information. The sections below are divided accordingly. | |
18 | ||
19 | It's important to observe that all communication examples are formatted in | |
20 | a reader-friendly way, so that they're easier to understand. However, in real | |
21 | protocol usage, they're emitted as a single line. | |
22 | ||
23 | Also, the following notation is used to denote data flow: | |
24 | ||
25 | -> data issued by the Client | |
26 | <- Server data response | |
27 | ||
28 | Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed | |
29 | information on the Server command and response formats. | |
30 | ||
31 | NOTE: This document is temporary and will be replaced soon. | |
32 | ||
33 | 1. Stability Considerations | |
34 | =========================== | |
35 | ||
36 | The current QMP command set (described in this file) may be useful for a | |
37 | number of use cases, however it's limited and several commands have bad | |
38 | defined semantics, specially with regard to command completion. | |
39 | ||
40 | These problems are going to be solved incrementally in the next QEMU releases | |
41 | and we're going to establish a deprecation policy for badly defined commands. | |
42 | ||
43 | If you're planning to adopt QMP, please observe the following: | |
44 | ||
c20cdf8b | 45 | 1. The deprecation policy will take effect and be documented soon, please |
82a56f0d LC |
46 | check the documentation of each used command as soon as a new release of |
47 | QEMU is available | |
48 | ||
49 | 2. DO NOT rely on anything which is not explicit documented | |
50 | ||
51 | 3. Errors, in special, are not documented. Applications should NOT check | |
52 | for specific errors classes or data (it's strongly recommended to only | |
53 | check for the "error" key) | |
54 | ||
55 | 2. Regular Commands | |
56 | =================== | |
57 | ||
58 | Server's responses in the examples below are always a success response, please | |
59 | refer to the QMP specification for more details on error responses. | |
60 | ||
61 | EQMP | |
62 | ||
63 | { | |
64 | .name = "quit", | |
65 | .args_type = "", | |
7a7f325e | 66 | .mhandler.cmd_new = qmp_marshal_input_quit, |
82a56f0d LC |
67 | }, |
68 | ||
69 | SQMP | |
70 | quit | |
71 | ---- | |
72 | ||
73 | Quit the emulator. | |
74 | ||
75 | Arguments: None. | |
76 | ||
77 | Example: | |
78 | ||
79 | -> { "execute": "quit" } | |
80 | <- { "return": {} } | |
81 | ||
82 | EQMP | |
83 | ||
84 | { | |
85 | .name = "eject", | |
86 | .args_type = "force:-f,device:B", | |
c245b6a3 | 87 | .mhandler.cmd_new = qmp_marshal_input_eject, |
82a56f0d LC |
88 | }, |
89 | ||
90 | SQMP | |
91 | eject | |
92 | ----- | |
93 | ||
94 | Eject a removable medium. | |
95 | ||
96 | Arguments: | |
97 | ||
98 | - force: force ejection (json-bool, optional) | |
99 | - device: device name (json-string) | |
100 | ||
101 | Example: | |
102 | ||
103 | -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } } | |
104 | <- { "return": {} } | |
105 | ||
106 | Note: The "force" argument defaults to false. | |
107 | ||
108 | EQMP | |
109 | ||
110 | { | |
111 | .name = "change", | |
112 | .args_type = "device:B,target:F,arg:s?", | |
333a96ec | 113 | .mhandler.cmd_new = qmp_marshal_input_change, |
82a56f0d LC |
114 | }, |
115 | ||
116 | SQMP | |
117 | change | |
118 | ------ | |
119 | ||
120 | Change a removable medium or VNC configuration. | |
121 | ||
122 | Arguments: | |
123 | ||
124 | - "device": device name (json-string) | |
125 | - "target": filename or item (json-string) | |
126 | - "arg": additional argument (json-string, optional) | |
127 | ||
128 | Examples: | |
129 | ||
130 | 1. Change a removable medium | |
131 | ||
132 | -> { "execute": "change", | |
133 | "arguments": { "device": "ide1-cd0", | |
134 | "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } | |
135 | <- { "return": {} } | |
136 | ||
137 | 2. Change VNC password | |
138 | ||
139 | -> { "execute": "change", | |
140 | "arguments": { "device": "vnc", "target": "password", | |
141 | "arg": "foobar1" } } | |
142 | <- { "return": {} } | |
143 | ||
144 | EQMP | |
145 | ||
146 | { | |
147 | .name = "screendump", | |
148 | .args_type = "filename:F", | |
149 | .params = "filename", | |
150 | .help = "save screen into PPM image 'filename'", | |
151 | .user_print = monitor_user_noop, | |
152 | .mhandler.cmd_new = do_screen_dump, | |
153 | }, | |
154 | ||
155 | SQMP | |
156 | screendump | |
157 | ---------- | |
158 | ||
159 | Save screen into PPM image. | |
160 | ||
161 | Arguments: | |
162 | ||
163 | - "filename": file path (json-string) | |
164 | ||
165 | Example: | |
166 | ||
167 | -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } } | |
168 | <- { "return": {} } | |
169 | ||
170 | EQMP | |
171 | ||
172 | { | |
173 | .name = "stop", | |
174 | .args_type = "", | |
5f158f21 | 175 | .mhandler.cmd_new = qmp_marshal_input_stop, |
82a56f0d LC |
176 | }, |
177 | ||
178 | SQMP | |
179 | stop | |
180 | ---- | |
181 | ||
182 | Stop the emulator. | |
183 | ||
184 | Arguments: None. | |
185 | ||
186 | Example: | |
187 | ||
188 | -> { "execute": "stop" } | |
189 | <- { "return": {} } | |
190 | ||
191 | EQMP | |
192 | ||
193 | { | |
194 | .name = "cont", | |
195 | .args_type = "", | |
e42e818b | 196 | .mhandler.cmd_new = qmp_marshal_input_cont, |
82a56f0d LC |
197 | }, |
198 | ||
199 | SQMP | |
200 | cont | |
201 | ---- | |
202 | ||
203 | Resume emulation. | |
204 | ||
205 | Arguments: None. | |
206 | ||
207 | Example: | |
208 | ||
209 | -> { "execute": "cont" } | |
210 | <- { "return": {} } | |
9b9df25a GH |
211 | |
212 | EQMP | |
213 | ||
214 | { | |
215 | .name = "system_wakeup", | |
216 | .args_type = "", | |
217 | .mhandler.cmd_new = qmp_marshal_input_system_wakeup, | |
218 | }, | |
219 | ||
220 | SQMP | |
221 | system_wakeup | |
222 | ------------- | |
223 | ||
224 | Wakeup guest from suspend. | |
225 | ||
226 | Arguments: None. | |
227 | ||
228 | Example: | |
229 | ||
230 | -> { "execute": "system_wakeup" } | |
231 | <- { "return": {} } | |
82a56f0d LC |
232 | |
233 | EQMP | |
234 | ||
235 | { | |
236 | .name = "system_reset", | |
237 | .args_type = "", | |
38d22653 | 238 | .mhandler.cmd_new = qmp_marshal_input_system_reset, |
82a56f0d LC |
239 | }, |
240 | ||
241 | SQMP | |
242 | system_reset | |
243 | ------------ | |
244 | ||
245 | Reset the system. | |
246 | ||
247 | Arguments: None. | |
248 | ||
249 | Example: | |
250 | ||
251 | -> { "execute": "system_reset" } | |
252 | <- { "return": {} } | |
253 | ||
254 | EQMP | |
255 | ||
256 | { | |
257 | .name = "system_powerdown", | |
258 | .args_type = "", | |
22e1bb9c | 259 | .mhandler.cmd_new = qmp_marshal_input_system_powerdown, |
82a56f0d LC |
260 | }, |
261 | ||
262 | SQMP | |
263 | system_powerdown | |
264 | ---------------- | |
265 | ||
266 | Send system power down event. | |
267 | ||
268 | Arguments: None. | |
269 | ||
270 | Example: | |
271 | ||
272 | -> { "execute": "system_powerdown" } | |
273 | <- { "return": {} } | |
274 | ||
275 | EQMP | |
276 | ||
277 | { | |
278 | .name = "device_add", | |
279 | .args_type = "device:O", | |
280 | .params = "driver[,prop=value][,...]", | |
281 | .help = "add device, like -device on the command line", | |
282 | .user_print = monitor_user_noop, | |
283 | .mhandler.cmd_new = do_device_add, | |
284 | }, | |
285 | ||
286 | SQMP | |
287 | device_add | |
288 | ---------- | |
289 | ||
290 | Add a device. | |
291 | ||
292 | Arguments: | |
293 | ||
294 | - "driver": the name of the new device's driver (json-string) | |
295 | - "bus": the device's parent bus (device tree path, json-string, optional) | |
296 | - "id": the device's ID, must be unique (json-string) | |
297 | - device properties | |
298 | ||
299 | Example: | |
300 | ||
301 | -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } } | |
302 | <- { "return": {} } | |
303 | ||
304 | Notes: | |
305 | ||
306 | (1) For detailed information about this command, please refer to the | |
307 | 'docs/qdev-device-use.txt' file. | |
308 | ||
309 | (2) It's possible to list device properties by running QEMU with the | |
310 | "-device DEVICE,\?" command-line argument, where DEVICE is the device's name | |
311 | ||
312 | EQMP | |
313 | ||
314 | { | |
315 | .name = "device_del", | |
316 | .args_type = "id:s", | |
a15fef21 | 317 | .mhandler.cmd_new = qmp_marshal_input_device_del, |
82a56f0d LC |
318 | }, |
319 | ||
320 | SQMP | |
321 | device_del | |
322 | ---------- | |
323 | ||
324 | Remove a device. | |
325 | ||
326 | Arguments: | |
327 | ||
328 | - "id": the device's ID (json-string) | |
329 | ||
330 | Example: | |
331 | ||
332 | -> { "execute": "device_del", "arguments": { "id": "net1" } } | |
333 | <- { "return": {} } | |
334 | ||
335 | EQMP | |
336 | ||
337 | { | |
338 | .name = "cpu", | |
339 | .args_type = "index:i", | |
755f1968 | 340 | .mhandler.cmd_new = qmp_marshal_input_cpu, |
82a56f0d LC |
341 | }, |
342 | ||
343 | SQMP | |
344 | cpu | |
345 | --- | |
346 | ||
347 | Set the default CPU. | |
348 | ||
349 | Arguments: | |
350 | ||
351 | - "index": the CPU's index (json-int) | |
352 | ||
353 | Example: | |
354 | ||
355 | -> { "execute": "cpu", "arguments": { "index": 0 } } | |
356 | <- { "return": {} } | |
357 | ||
358 | Note: CPUs' indexes are obtained with the 'query-cpus' command. | |
359 | ||
360 | EQMP | |
361 | ||
362 | { | |
363 | .name = "memsave", | |
0cfd6a9a LC |
364 | .args_type = "val:l,size:i,filename:s,cpu:i?", |
365 | .mhandler.cmd_new = qmp_marshal_input_memsave, | |
82a56f0d LC |
366 | }, |
367 | ||
368 | SQMP | |
369 | memsave | |
370 | ------- | |
371 | ||
372 | Save to disk virtual memory dump starting at 'val' of size 'size'. | |
373 | ||
374 | Arguments: | |
375 | ||
376 | - "val": the starting address (json-int) | |
377 | - "size": the memory size, in bytes (json-int) | |
378 | - "filename": file path (json-string) | |
0cfd6a9a | 379 | - "cpu": virtual CPU index (json-int, optional) |
82a56f0d LC |
380 | |
381 | Example: | |
382 | ||
383 | -> { "execute": "memsave", | |
384 | "arguments": { "val": 10, | |
385 | "size": 100, | |
386 | "filename": "/tmp/virtual-mem-dump" } } | |
387 | <- { "return": {} } | |
388 | ||
82a56f0d LC |
389 | EQMP |
390 | ||
391 | { | |
392 | .name = "pmemsave", | |
393 | .args_type = "val:l,size:i,filename:s", | |
6d3962bf | 394 | .mhandler.cmd_new = qmp_marshal_input_pmemsave, |
82a56f0d LC |
395 | }, |
396 | ||
397 | SQMP | |
398 | pmemsave | |
399 | -------- | |
400 | ||
401 | Save to disk physical memory dump starting at 'val' of size 'size'. | |
402 | ||
403 | Arguments: | |
404 | ||
405 | - "val": the starting address (json-int) | |
406 | - "size": the memory size, in bytes (json-int) | |
407 | - "filename": file path (json-string) | |
408 | ||
409 | Example: | |
410 | ||
411 | -> { "execute": "pmemsave", | |
412 | "arguments": { "val": 10, | |
413 | "size": 100, | |
414 | "filename": "/tmp/physical-mem-dump" } } | |
415 | <- { "return": {} } | |
416 | ||
a4046664 LJ |
417 | EQMP |
418 | ||
419 | { | |
420 | .name = "inject-nmi", | |
421 | .args_type = "", | |
ab49ab5c | 422 | .mhandler.cmd_new = qmp_marshal_input_inject_nmi, |
a4046664 LJ |
423 | }, |
424 | ||
425 | SQMP | |
426 | inject-nmi | |
427 | ---------- | |
428 | ||
429 | Inject an NMI on guest's CPUs. | |
430 | ||
431 | Arguments: None. | |
432 | ||
433 | Example: | |
434 | ||
435 | -> { "execute": "inject-nmi" } | |
436 | <- { "return": {} } | |
437 | ||
de253f14 LC |
438 | Note: inject-nmi fails when the guest doesn't support injecting. |
439 | Currently, only x86 guests do. | |
a4046664 | 440 | |
a7ae8355 SS |
441 | EQMP |
442 | ||
443 | { | |
444 | .name = "xen-save-devices-state", | |
445 | .args_type = "filename:F", | |
446 | .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state, | |
447 | }, | |
448 | ||
449 | SQMP | |
450 | xen-save-devices-state | |
451 | ------- | |
452 | ||
453 | Save the state of all devices to file. The RAM and the block devices | |
454 | of the VM are not saved by this command. | |
455 | ||
456 | Arguments: | |
457 | ||
458 | - "filename": the file to save the state of the devices to as binary | |
459 | data. See xen-save-devices-state.txt for a description of the binary | |
460 | format. | |
461 | ||
462 | Example: | |
463 | ||
464 | -> { "execute": "xen-save-devices-state", | |
465 | "arguments": { "filename": "/tmp/save" } } | |
466 | <- { "return": {} } | |
467 | ||
82a56f0d LC |
468 | EQMP |
469 | ||
470 | { | |
471 | .name = "migrate", | |
472 | .args_type = "detach:-d,blk:-b,inc:-i,uri:s", | |
e1c37d0e | 473 | .mhandler.cmd_new = qmp_marshal_input_migrate, |
82a56f0d LC |
474 | }, |
475 | ||
476 | SQMP | |
477 | migrate | |
478 | ------- | |
479 | ||
480 | Migrate to URI. | |
481 | ||
482 | Arguments: | |
483 | ||
484 | - "blk": block migration, full disk copy (json-bool, optional) | |
485 | - "inc": incremental disk copy (json-bool, optional) | |
486 | - "uri": Destination URI (json-string) | |
487 | ||
488 | Example: | |
489 | ||
490 | -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } } | |
491 | <- { "return": {} } | |
492 | ||
493 | Notes: | |
494 | ||
495 | (1) The 'query-migrate' command should be used to check migration's progress | |
496 | and final result (this information is provided by the 'status' member) | |
497 | (2) All boolean arguments default to false | |
498 | (3) The user Monitor's "detach" argument is invalid in QMP and should not | |
499 | be used | |
500 | ||
501 | EQMP | |
502 | ||
503 | { | |
504 | .name = "migrate_cancel", | |
505 | .args_type = "", | |
6cdedb07 | 506 | .mhandler.cmd_new = qmp_marshal_input_migrate_cancel, |
82a56f0d LC |
507 | }, |
508 | ||
509 | SQMP | |
510 | migrate_cancel | |
511 | -------------- | |
512 | ||
513 | Cancel the current migration. | |
514 | ||
515 | Arguments: None. | |
516 | ||
517 | Example: | |
518 | ||
519 | -> { "execute": "migrate_cancel" } | |
520 | <- { "return": {} } | |
521 | ||
9e1ba4cc OW |
522 | EQMP |
523 | { | |
524 | .name = "migrate-set-cache-size", | |
525 | .args_type = "value:o", | |
526 | .mhandler.cmd_new = qmp_marshal_input_migrate_set_cache_size, | |
527 | }, | |
528 | ||
529 | SQMP | |
530 | migrate-set-cache-size | |
531 | --------------------- | |
532 | ||
533 | Set cache size to be used by XBZRLE migration, the cache size will be rounded | |
534 | down to the nearest power of 2 | |
535 | ||
536 | Arguments: | |
537 | ||
538 | - "value": cache size in bytes (json-int) | |
539 | ||
540 | Example: | |
541 | ||
542 | -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } } | |
543 | <- { "return": {} } | |
544 | ||
545 | EQMP | |
546 | { | |
547 | .name = "query-migrate-cache-size", | |
548 | .args_type = "", | |
549 | .mhandler.cmd_new = qmp_marshal_input_query_migrate_cache_size, | |
550 | }, | |
551 | ||
552 | SQMP | |
553 | query-migrate-cache-size | |
554 | --------------------- | |
555 | ||
556 | Show cache size to be used by XBZRLE migration | |
557 | ||
558 | returns a json-object with the following information: | |
559 | - "size" : json-int | |
560 | ||
561 | Example: | |
562 | ||
563 | -> { "execute": "query-migrate-cache-size" } | |
564 | <- { "return": 67108864 } | |
565 | ||
82a56f0d LC |
566 | EQMP |
567 | ||
568 | { | |
569 | .name = "migrate_set_speed", | |
3a019b6e | 570 | .args_type = "value:o", |
3dc85383 | 571 | .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed, |
82a56f0d LC |
572 | }, |
573 | ||
e866e239 | 574 | SQMP |
ff73edf5 JS |
575 | migrate_set_speed |
576 | ----------------- | |
e866e239 | 577 | |
ff73edf5 | 578 | Set maximum speed for migrations. |
e866e239 GH |
579 | |
580 | Arguments: | |
581 | ||
ff73edf5 | 582 | - "value": maximum speed, in bytes per second (json-int) |
e866e239 GH |
583 | |
584 | Example: | |
585 | ||
ff73edf5 | 586 | -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } } |
e866e239 GH |
587 | <- { "return": {} } |
588 | ||
589 | EQMP | |
590 | ||
591 | { | |
ff73edf5 JS |
592 | .name = "migrate_set_downtime", |
593 | .args_type = "value:T", | |
4f0a993b | 594 | .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime, |
e866e239 GH |
595 | }, |
596 | ||
82a56f0d | 597 | SQMP |
ff73edf5 JS |
598 | migrate_set_downtime |
599 | -------------------- | |
82a56f0d | 600 | |
ff73edf5 | 601 | Set maximum tolerated downtime (in seconds) for migrations. |
82a56f0d LC |
602 | |
603 | Arguments: | |
604 | ||
ff73edf5 | 605 | - "value": maximum downtime (json-number) |
82a56f0d LC |
606 | |
607 | Example: | |
608 | ||
ff73edf5 | 609 | -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } } |
82a56f0d LC |
610 | <- { "return": {} } |
611 | ||
612 | EQMP | |
613 | ||
614 | { | |
ff73edf5 JS |
615 | .name = "client_migrate_info", |
616 | .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?", | |
617 | .params = "protocol hostname port tls-port cert-subject", | |
618 | .help = "send migration info to spice/vnc client", | |
82a56f0d | 619 | .user_print = monitor_user_noop, |
edc5cb1a YH |
620 | .mhandler.cmd_async = client_migrate_info, |
621 | .flags = MONITOR_CMD_ASYNC, | |
82a56f0d LC |
622 | }, |
623 | ||
624 | SQMP | |
ff73edf5 JS |
625 | client_migrate_info |
626 | ------------------ | |
82a56f0d | 627 | |
ff73edf5 JS |
628 | Set the spice/vnc connection info for the migration target. The spice/vnc |
629 | server will ask the spice/vnc client to automatically reconnect using the | |
630 | new parameters (if specified) once the vm migration finished successfully. | |
82a56f0d LC |
631 | |
632 | Arguments: | |
633 | ||
ff73edf5 JS |
634 | - "protocol": protocol: "spice" or "vnc" (json-string) |
635 | - "hostname": migration target hostname (json-string) | |
636 | - "port": spice/vnc tcp port for plaintext channels (json-int, optional) | |
637 | - "tls-port": spice tcp port for tls-secured channels (json-int, optional) | |
638 | - "cert-subject": server certificate subject (json-string, optional) | |
82a56f0d LC |
639 | |
640 | Example: | |
641 | ||
ff73edf5 JS |
642 | -> { "execute": "client_migrate_info", |
643 | "arguments": { "protocol": "spice", | |
644 | "hostname": "virt42.lab.kraxel.org", | |
645 | "port": 1234 } } | |
82a56f0d LC |
646 | <- { "return": {} } |
647 | ||
783e9b48 WC |
648 | EQMP |
649 | ||
650 | { | |
651 | .name = "dump-guest-memory", | |
652 | .args_type = "paging:b,protocol:s,begin:i?,end:i?", | |
653 | .params = "-p protocol [begin] [length]", | |
654 | .help = "dump guest memory to file", | |
655 | .user_print = monitor_user_noop, | |
656 | .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory, | |
657 | }, | |
658 | ||
659 | SQMP | |
660 | dump | |
661 | ||
662 | ||
663 | Dump guest memory to file. The file can be processed with crash or gdb. | |
664 | ||
665 | Arguments: | |
666 | ||
667 | - "paging": do paging to get guest's memory mapping (json-bool) | |
668 | - "protocol": destination file(started with "file:") or destination file | |
669 | descriptor (started with "fd:") (json-string) | |
670 | - "begin": the starting physical address. It's optional, and should be specified | |
671 | with length together (json-int) | |
672 | - "length": the memory size, in bytes. It's optional, and should be specified | |
673 | with begin together (json-int) | |
674 | ||
675 | Example: | |
676 | ||
677 | -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } } | |
678 | <- { "return": {} } | |
679 | ||
680 | Notes: | |
681 | ||
682 | (1) All boolean arguments default to false | |
683 | ||
82a56f0d LC |
684 | EQMP |
685 | ||
686 | { | |
687 | .name = "netdev_add", | |
688 | .args_type = "netdev:O", | |
928059a3 | 689 | .mhandler.cmd_new = qmp_netdev_add, |
82a56f0d LC |
690 | }, |
691 | ||
692 | SQMP | |
693 | netdev_add | |
694 | ---------- | |
695 | ||
696 | Add host network device. | |
697 | ||
698 | Arguments: | |
699 | ||
700 | - "type": the device type, "tap", "user", ... (json-string) | |
701 | - "id": the device's ID, must be unique (json-string) | |
702 | - device options | |
703 | ||
704 | Example: | |
705 | ||
706 | -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } | |
707 | <- { "return": {} } | |
708 | ||
709 | Note: The supported device options are the same ones supported by the '-net' | |
710 | command-line argument, which are listed in the '-help' output or QEMU's | |
711 | manual | |
712 | ||
713 | EQMP | |
714 | ||
715 | { | |
716 | .name = "netdev_del", | |
717 | .args_type = "id:s", | |
5f964155 | 718 | .mhandler.cmd_new = qmp_marshal_input_netdev_del, |
82a56f0d LC |
719 | }, |
720 | ||
721 | SQMP | |
722 | netdev_del | |
723 | ---------- | |
724 | ||
725 | Remove host network device. | |
726 | ||
727 | Arguments: | |
728 | ||
729 | - "id": the device's ID, must be unique (json-string) | |
730 | ||
731 | Example: | |
732 | ||
733 | -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } | |
734 | <- { "return": {} } | |
735 | ||
6d4a2b3a CH |
736 | |
737 | EQMP | |
738 | ||
739 | { | |
740 | .name = "block_resize", | |
741 | .args_type = "device:B,size:o", | |
5e7caacb | 742 | .mhandler.cmd_new = qmp_marshal_input_block_resize, |
6d4a2b3a CH |
743 | }, |
744 | ||
745 | SQMP | |
746 | block_resize | |
747 | ------------ | |
748 | ||
749 | Resize a block image while a guest is running. | |
750 | ||
751 | Arguments: | |
752 | ||
753 | - "device": the device's ID, must be unique (json-string) | |
754 | - "size": new size | |
755 | ||
756 | Example: | |
757 | ||
758 | -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } } | |
759 | <- { "return": {} } | |
760 | ||
d967b2f1 JS |
761 | EQMP |
762 | ||
12bd451f | 763 | { |
db58f9c0 | 764 | .name = "block-stream", |
c83c66c3 | 765 | .args_type = "device:B,base:s?,speed:o?", |
12bd451f SH |
766 | .mhandler.cmd_new = qmp_marshal_input_block_stream, |
767 | }, | |
768 | ||
2d47c6e9 | 769 | { |
db58f9c0 | 770 | .name = "block-job-set-speed", |
882ec7ce | 771 | .args_type = "device:B,speed:o", |
2d47c6e9 SH |
772 | .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed, |
773 | }, | |
774 | ||
370521a1 | 775 | { |
db58f9c0 | 776 | .name = "block-job-cancel", |
370521a1 SH |
777 | .args_type = "device:B", |
778 | .mhandler.cmd_new = qmp_marshal_input_block_job_cancel, | |
779 | }, | |
c186402c | 780 | { |
52e7c241 | 781 | .name = "transaction", |
b9f8978c | 782 | .args_type = "actions:q", |
52e7c241 | 783 | .mhandler.cmd_new = qmp_marshal_input_transaction, |
c186402c JC |
784 | }, |
785 | ||
786 | SQMP | |
52e7c241 PB |
787 | transaction |
788 | ----------- | |
c186402c | 789 | |
52e7c241 PB |
790 | Atomically operate on one or more block devices. The only supported |
791 | operation for now is snapshotting. If there is any failure performing | |
792 | any of the operations, all snapshots for the group are abandoned, and | |
793 | the original disks pre-snapshot attempt are used. | |
c186402c | 794 | |
52e7c241 PB |
795 | A list of dictionaries is accepted, that contains the actions to be performed. |
796 | For snapshots this is the device, the file to use for the new snapshot, | |
797 | and the format. The default format, if not specified, is qcow2. | |
c186402c | 798 | |
bc8b094f PB |
799 | Each new snapshot defaults to being created by QEMU (wiping any |
800 | contents if the file already exists), but it is also possible to reuse | |
801 | an externally-created file. In the latter case, you should ensure that | |
802 | the new image file has the same contents as the current one; QEMU cannot | |
803 | perform any meaningful check. Typically this is achieved by using the | |
804 | current image file as the backing file for the new image. | |
805 | ||
c186402c JC |
806 | Arguments: |
807 | ||
52e7c241 PB |
808 | actions array: |
809 | - "type": the operation to perform. The only supported | |
810 | value is "blockdev-snapshot-sync". (json-string) | |
811 | - "data": a dictionary. The contents depend on the value | |
812 | of "type". When "type" is "blockdev-snapshot-sync": | |
813 | - "device": device name to snapshot (json-string) | |
814 | - "snapshot-file": name of new image file (json-string) | |
815 | - "format": format of new image (json-string, optional) | |
bc8b094f PB |
816 | - "mode": whether and how QEMU should create the snapshot file |
817 | (NewImageMode, optional, default "absolute-paths") | |
c186402c JC |
818 | |
819 | Example: | |
820 | ||
52e7c241 PB |
821 | -> { "execute": "transaction", |
822 | "arguments": { "actions": [ | |
823 | { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd0", | |
824 | "snapshot-file": "/some/place/my-image", | |
825 | "format": "qcow2" } }, | |
826 | { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd1", | |
827 | "snapshot-file": "/some/place/my-image2", | |
bc8b094f | 828 | "mode": "existing", |
52e7c241 | 829 | "format": "qcow2" } } ] } } |
c186402c JC |
830 | <- { "return": {} } |
831 | ||
832 | EQMP | |
370521a1 | 833 | |
d967b2f1 JS |
834 | { |
835 | .name = "blockdev-snapshot-sync", | |
31155b9b | 836 | .args_type = "device:B,snapshot-file:s,format:s?,mode:s?", |
6106e249 | 837 | .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync, |
d967b2f1 JS |
838 | }, |
839 | ||
840 | SQMP | |
841 | blockdev-snapshot-sync | |
842 | ---------------------- | |
843 | ||
844 | Synchronous snapshot of a block device. snapshot-file specifies the | |
845 | target of the new image. If the file exists, or if it is a device, the | |
846 | snapshot will be created in the existing file/device. If does not | |
847 | exist, a new file will be created. format specifies the format of the | |
848 | snapshot image, default is qcow2. | |
849 | ||
850 | Arguments: | |
851 | ||
852 | - "device": device name to snapshot (json-string) | |
853 | - "snapshot-file": name of new image file (json-string) | |
6cc2a415 PB |
854 | - "mode": whether and how QEMU should create the snapshot file |
855 | (NewImageMode, optional, default "absolute-paths") | |
d967b2f1 JS |
856 | - "format": format of new image (json-string, optional) |
857 | ||
858 | Example: | |
859 | ||
7f3850c2 LC |
860 | -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0", |
861 | "snapshot-file": | |
862 | "/some/place/my-image", | |
863 | "format": "qcow2" } } | |
d967b2f1 JS |
864 | <- { "return": {} } |
865 | ||
82a56f0d LC |
866 | EQMP |
867 | ||
868 | { | |
869 | .name = "balloon", | |
870 | .args_type = "value:M", | |
d72f3264 | 871 | .mhandler.cmd_new = qmp_marshal_input_balloon, |
82a56f0d LC |
872 | }, |
873 | ||
874 | SQMP | |
875 | balloon | |
876 | ------- | |
877 | ||
878 | Request VM to change its memory allocation (in bytes). | |
879 | ||
880 | Arguments: | |
881 | ||
882 | - "value": New memory allocation (json-int) | |
883 | ||
884 | Example: | |
885 | ||
886 | -> { "execute": "balloon", "arguments": { "value": 536870912 } } | |
887 | <- { "return": {} } | |
888 | ||
889 | EQMP | |
890 | ||
891 | { | |
892 | .name = "set_link", | |
893 | .args_type = "name:s,up:b", | |
4b37156c | 894 | .mhandler.cmd_new = qmp_marshal_input_set_link, |
82a56f0d LC |
895 | }, |
896 | ||
897 | SQMP | |
898 | set_link | |
899 | -------- | |
900 | ||
901 | Change the link status of a network adapter. | |
902 | ||
903 | Arguments: | |
904 | ||
905 | - "name": network device name (json-string) | |
906 | - "up": status is up (json-bool) | |
907 | ||
908 | Example: | |
909 | ||
910 | -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } } | |
911 | <- { "return": {} } | |
912 | ||
913 | EQMP | |
914 | ||
915 | { | |
916 | .name = "getfd", | |
917 | .args_type = "fdname:s", | |
918 | .params = "getfd name", | |
919 | .help = "receive a file descriptor via SCM rights and assign it a name", | |
208c9d1b | 920 | .mhandler.cmd_new = qmp_marshal_input_getfd, |
82a56f0d LC |
921 | }, |
922 | ||
923 | SQMP | |
924 | getfd | |
925 | ----- | |
926 | ||
927 | Receive a file descriptor via SCM rights and assign it a name. | |
928 | ||
929 | Arguments: | |
930 | ||
931 | - "fdname": file descriptor name (json-string) | |
932 | ||
933 | Example: | |
934 | ||
935 | -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } | |
936 | <- { "return": {} } | |
937 | ||
208c9d1b CB |
938 | Notes: |
939 | ||
940 | (1) If the name specified by the "fdname" argument already exists, | |
941 | the file descriptor assigned to it will be closed and replaced | |
942 | by the received file descriptor. | |
943 | (2) The 'closefd' command can be used to explicitly close the file | |
944 | descriptor when it is no longer needed. | |
945 | ||
82a56f0d LC |
946 | EQMP |
947 | ||
948 | { | |
949 | .name = "closefd", | |
950 | .args_type = "fdname:s", | |
951 | .params = "closefd name", | |
952 | .help = "close a file descriptor previously passed via SCM rights", | |
208c9d1b | 953 | .mhandler.cmd_new = qmp_marshal_input_closefd, |
82a56f0d LC |
954 | }, |
955 | ||
956 | SQMP | |
957 | closefd | |
958 | ------- | |
959 | ||
960 | Close a file descriptor previously passed via SCM rights. | |
961 | ||
962 | Arguments: | |
963 | ||
964 | - "fdname": file descriptor name (json-string) | |
965 | ||
966 | Example: | |
967 | ||
968 | -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } | |
969 | <- { "return": {} } | |
970 | ||
ba1c048a CB |
971 | EQMP |
972 | ||
973 | { | |
974 | .name = "add-fd", | |
975 | .args_type = "fdset-id:i?,opaque:s?", | |
976 | .params = "add-fd fdset-id opaque", | |
977 | .help = "Add a file descriptor, that was passed via SCM rights, to an fd set", | |
978 | .mhandler.cmd_new = qmp_marshal_input_add_fd, | |
979 | }, | |
980 | ||
981 | SQMP | |
982 | add-fd | |
983 | ------- | |
984 | ||
985 | Add a file descriptor, that was passed via SCM rights, to an fd set. | |
986 | ||
987 | Arguments: | |
988 | ||
989 | - "fdset-id": The ID of the fd set to add the file descriptor to. | |
990 | (json-int, optional) | |
991 | - "opaque": A free-form string that can be used to describe the fd. | |
992 | (json-string, optional) | |
993 | ||
994 | Return a json-object with the following information: | |
995 | ||
996 | - "fdset-id": The ID of the fd set that the fd was added to. (json-int) | |
997 | - "fd": The file descriptor that was received via SCM rights and added to the | |
998 | fd set. (json-int) | |
999 | ||
1000 | Example: | |
1001 | ||
1002 | -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } } | |
1003 | <- { "return": { "fdset-id": 1, "fd": 3 } } | |
1004 | ||
1005 | Notes: | |
1006 | ||
1007 | (1) The list of fd sets is shared by all monitor connections. | |
1008 | (2) If "fdset-id" is not specified, a new fd set will be created. | |
1009 | ||
1010 | EQMP | |
1011 | ||
1012 | { | |
1013 | .name = "remove-fd", | |
1014 | .args_type = "fdset-id:i,fd:i?", | |
1015 | .params = "remove-fd fdset-id fd", | |
1016 | .help = "Remove a file descriptor from an fd set", | |
1017 | .mhandler.cmd_new = qmp_marshal_input_remove_fd, | |
1018 | }, | |
1019 | ||
1020 | SQMP | |
1021 | remove-fd | |
1022 | --------- | |
1023 | ||
1024 | Remove a file descriptor from an fd set. | |
1025 | ||
1026 | Arguments: | |
1027 | ||
1028 | - "fdset-id": The ID of the fd set that the file descriptor belongs to. | |
1029 | (json-int) | |
1030 | - "fd": The file descriptor that is to be removed. (json-int, optional) | |
1031 | ||
1032 | Example: | |
1033 | ||
1034 | -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } } | |
1035 | <- { "return": {} } | |
1036 | ||
1037 | Notes: | |
1038 | ||
1039 | (1) The list of fd sets is shared by all monitor connections. | |
1040 | (2) If "fd" is not specified, all file descriptors in "fdset-id" will be | |
1041 | removed. | |
1042 | ||
1043 | EQMP | |
1044 | ||
1045 | { | |
1046 | .name = "query-fdsets", | |
1047 | .args_type = "", | |
1048 | .help = "Return information describing all fd sets", | |
1049 | .mhandler.cmd_new = qmp_marshal_input_query_fdsets, | |
1050 | }, | |
1051 | ||
1052 | SQMP | |
1053 | query-fdsets | |
1054 | ------------- | |
1055 | ||
1056 | Return information describing all fd sets. | |
1057 | ||
1058 | Arguments: None | |
1059 | ||
1060 | Example: | |
1061 | ||
1062 | -> { "execute": "query-fdsets" } | |
1063 | <- { "return": [ | |
1064 | { | |
1065 | "fds": [ | |
1066 | { | |
1067 | "fd": 30, | |
1068 | "opaque": "rdonly:/path/to/file" | |
1069 | }, | |
1070 | { | |
1071 | "fd": 24, | |
1072 | "opaque": "rdwr:/path/to/file" | |
1073 | } | |
1074 | ], | |
1075 | "fdset-id": 1 | |
1076 | }, | |
1077 | { | |
1078 | "fds": [ | |
1079 | { | |
1080 | "fd": 28 | |
1081 | }, | |
1082 | { | |
1083 | "fd": 29 | |
1084 | } | |
1085 | ], | |
1086 | "fdset-id": 0 | |
1087 | } | |
1088 | ] | |
1089 | } | |
1090 | ||
1091 | Note: The list of fd sets is shared by all monitor connections. | |
1092 | ||
82a56f0d LC |
1093 | EQMP |
1094 | ||
1095 | { | |
1096 | .name = "block_passwd", | |
1097 | .args_type = "device:B,password:s", | |
a4dea8a9 | 1098 | .mhandler.cmd_new = qmp_marshal_input_block_passwd, |
82a56f0d LC |
1099 | }, |
1100 | ||
1101 | SQMP | |
1102 | block_passwd | |
1103 | ------------ | |
1104 | ||
1105 | Set the password of encrypted block devices. | |
1106 | ||
1107 | Arguments: | |
1108 | ||
1109 | - "device": device name (json-string) | |
1110 | - "password": password (json-string) | |
1111 | ||
1112 | Example: | |
1113 | ||
1114 | -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0", | |
1115 | "password": "12345" } } | |
1116 | <- { "return": {} } | |
1117 | ||
727f005e ZYW |
1118 | EQMP |
1119 | ||
1120 | { | |
1121 | .name = "block_set_io_throttle", | |
1122 | .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l", | |
80047da5 | 1123 | .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle, |
727f005e ZYW |
1124 | }, |
1125 | ||
1126 | SQMP | |
1127 | block_set_io_throttle | |
1128 | ------------ | |
1129 | ||
1130 | Change I/O throttle limits for a block drive. | |
1131 | ||
1132 | Arguments: | |
1133 | ||
1134 | - "device": device name (json-string) | |
1135 | - "bps": total throughput limit in bytes per second(json-int) | |
1136 | - "bps_rd": read throughput limit in bytes per second(json-int) | |
1137 | - "bps_wr": read throughput limit in bytes per second(json-int) | |
1138 | - "iops": total I/O operations per second(json-int) | |
1139 | - "iops_rd": read I/O operations per second(json-int) | |
1140 | - "iops_wr": write I/O operations per second(json-int) | |
1141 | ||
1142 | Example: | |
1143 | ||
1144 | -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0", | |
1145 | "bps": "1000000", | |
1146 | "bps_rd": "0", | |
1147 | "bps_wr": "0", | |
1148 | "iops": "0", | |
1149 | "iops_rd": "0", | |
1150 | "iops_wr": "0" } } | |
1151 | <- { "return": {} } | |
1152 | ||
7572150c GH |
1153 | EQMP |
1154 | ||
1155 | { | |
1156 | .name = "set_password", | |
1157 | .args_type = "protocol:s,password:s,connected:s?", | |
fbf796fd | 1158 | .mhandler.cmd_new = qmp_marshal_input_set_password, |
7572150c GH |
1159 | }, |
1160 | ||
1161 | SQMP | |
1162 | set_password | |
1163 | ------------ | |
1164 | ||
1165 | Set the password for vnc/spice protocols. | |
1166 | ||
1167 | Arguments: | |
1168 | ||
1169 | - "protocol": protocol name (json-string) | |
1170 | - "password": password (json-string) | |
1171 | - "connected": [ keep | disconnect | fail ] (josn-string, optional) | |
1172 | ||
1173 | Example: | |
1174 | ||
1175 | -> { "execute": "set_password", "arguments": { "protocol": "vnc", | |
1176 | "password": "secret" } } | |
1177 | <- { "return": {} } | |
1178 | ||
1179 | EQMP | |
1180 | ||
1181 | { | |
1182 | .name = "expire_password", | |
1183 | .args_type = "protocol:s,time:s", | |
9ad5372d | 1184 | .mhandler.cmd_new = qmp_marshal_input_expire_password, |
7572150c GH |
1185 | }, |
1186 | ||
1187 | SQMP | |
1188 | expire_password | |
1189 | --------------- | |
1190 | ||
1191 | Set the password expire time for vnc/spice protocols. | |
1192 | ||
1193 | Arguments: | |
1194 | ||
1195 | - "protocol": protocol name (json-string) | |
1196 | - "time": [ now | never | +secs | secs ] (json-string) | |
1197 | ||
1198 | Example: | |
1199 | ||
1200 | -> { "execute": "expire_password", "arguments": { "protocol": "vnc", | |
1201 | "time": "+60" } } | |
1202 | <- { "return": {} } | |
1203 | ||
82a56f0d LC |
1204 | EQMP |
1205 | ||
13661089 DB |
1206 | { |
1207 | .name = "add_client", | |
f1f5f407 DB |
1208 | .args_type = "protocol:s,fdname:s,skipauth:b?,tls:b?", |
1209 | .params = "protocol fdname skipauth tls", | |
13661089 DB |
1210 | .help = "add a graphics client", |
1211 | .user_print = monitor_user_noop, | |
1212 | .mhandler.cmd_new = add_graphics_client, | |
1213 | }, | |
1214 | ||
1215 | SQMP | |
1216 | add_client | |
1217 | ---------- | |
1218 | ||
1219 | Add a graphics client | |
1220 | ||
1221 | Arguments: | |
1222 | ||
1223 | - "protocol": protocol name (json-string) | |
1224 | - "fdname": file descriptor name (json-string) | |
f1f5f407 DB |
1225 | - "skipauth": whether to skip authentication (json-bool, optional) |
1226 | - "tls": whether to perform TLS (json-bool, optional) | |
13661089 DB |
1227 | |
1228 | Example: | |
1229 | ||
1230 | -> { "execute": "add_client", "arguments": { "protocol": "vnc", | |
1231 | "fdname": "myclient" } } | |
1232 | <- { "return": {} } | |
1233 | ||
1234 | EQMP | |
82a56f0d LC |
1235 | { |
1236 | .name = "qmp_capabilities", | |
1237 | .args_type = "", | |
1238 | .params = "", | |
1239 | .help = "enable QMP capabilities", | |
1240 | .user_print = monitor_user_noop, | |
1241 | .mhandler.cmd_new = do_qmp_capabilities, | |
1242 | }, | |
1243 | ||
1244 | SQMP | |
1245 | qmp_capabilities | |
1246 | ---------------- | |
1247 | ||
1248 | Enable QMP capabilities. | |
1249 | ||
1250 | Arguments: None. | |
1251 | ||
1252 | Example: | |
1253 | ||
1254 | -> { "execute": "qmp_capabilities" } | |
1255 | <- { "return": {} } | |
1256 | ||
1257 | Note: This command must be issued before issuing any other command. | |
1258 | ||
0268d97c LC |
1259 | EQMP |
1260 | ||
1261 | { | |
1262 | .name = "human-monitor-command", | |
1263 | .args_type = "command-line:s,cpu-index:i?", | |
d51a67b4 | 1264 | .mhandler.cmd_new = qmp_marshal_input_human_monitor_command, |
0268d97c LC |
1265 | }, |
1266 | ||
1267 | SQMP | |
1268 | human-monitor-command | |
1269 | --------------------- | |
1270 | ||
1271 | Execute a Human Monitor command. | |
1272 | ||
1273 | Arguments: | |
1274 | ||
1275 | - command-line: the command name and its arguments, just like the | |
1276 | Human Monitor's shell (json-string) | |
1277 | - cpu-index: select the CPU number to be used by commands which access CPU | |
1278 | data, like 'info registers'. The Monitor selects CPU 0 if this | |
1279 | argument is not provided (json-int, optional) | |
1280 | ||
1281 | Example: | |
1282 | ||
1283 | -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } } | |
1284 | <- { "return": "kvm support: enabled\r\n" } | |
1285 | ||
1286 | Notes: | |
1287 | ||
1288 | (1) The Human Monitor is NOT an stable interface, this means that command | |
1289 | names, arguments and responses can change or be removed at ANY time. | |
1290 | Applications that rely on long term stability guarantees should NOT | |
1291 | use this command | |
1292 | ||
1293 | (2) Limitations: | |
1294 | ||
1295 | o This command is stateless, this means that commands that depend | |
1296 | on state information (such as getfd) might not work | |
1297 | ||
1298 | o Commands that prompt the user for data (eg. 'cont' when the block | |
1299 | device is encrypted) don't currently work | |
1300 | ||
82a56f0d LC |
1301 | 3. Query Commands |
1302 | ================= | |
1303 | ||
1304 | HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change | |
1305 | HXCOMM this! We will possibly move query commands definitions inside those | |
1306 | HXCOMM sections, just like regular commands. | |
1307 | ||
1308 | EQMP | |
1309 | ||
1310 | SQMP | |
1311 | query-version | |
1312 | ------------- | |
1313 | ||
1314 | Show QEMU version. | |
1315 | ||
1316 | Return a json-object with the following information: | |
1317 | ||
1318 | - "qemu": A json-object containing three integer values: | |
1319 | - "major": QEMU's major version (json-int) | |
1320 | - "minor": QEMU's minor version (json-int) | |
1321 | - "micro": QEMU's micro version (json-int) | |
1322 | - "package": package's version (json-string) | |
1323 | ||
1324 | Example: | |
1325 | ||
1326 | -> { "execute": "query-version" } | |
1327 | <- { | |
1328 | "return":{ | |
1329 | "qemu":{ | |
1330 | "major":0, | |
1331 | "minor":11, | |
1332 | "micro":5 | |
1333 | }, | |
1334 | "package":"" | |
1335 | } | |
1336 | } | |
1337 | ||
1338 | EQMP | |
1339 | ||
b9c15f16 LC |
1340 | { |
1341 | .name = "query-version", | |
1342 | .args_type = "", | |
1343 | .mhandler.cmd_new = qmp_marshal_input_query_version, | |
1344 | }, | |
1345 | ||
82a56f0d LC |
1346 | SQMP |
1347 | query-commands | |
1348 | -------------- | |
1349 | ||
1350 | List QMP available commands. | |
1351 | ||
1352 | Each command is represented by a json-object, the returned value is a json-array | |
1353 | of all commands. | |
1354 | ||
1355 | Each json-object contain: | |
1356 | ||
1357 | - "name": command's name (json-string) | |
1358 | ||
1359 | Example: | |
1360 | ||
1361 | -> { "execute": "query-commands" } | |
1362 | <- { | |
1363 | "return":[ | |
1364 | { | |
1365 | "name":"query-balloon" | |
1366 | }, | |
1367 | { | |
1368 | "name":"system_powerdown" | |
1369 | } | |
1370 | ] | |
1371 | } | |
1372 | ||
1373 | Note: This example has been shortened as the real response is too long. | |
1374 | ||
1375 | EQMP | |
1376 | ||
aa9b79bc LC |
1377 | { |
1378 | .name = "query-commands", | |
1379 | .args_type = "", | |
1380 | .mhandler.cmd_new = qmp_marshal_input_query_commands, | |
1381 | }, | |
1382 | ||
4860853d DB |
1383 | SQMP |
1384 | query-events | |
1385 | -------------- | |
1386 | ||
1387 | List QMP available events. | |
1388 | ||
1389 | Each event is represented by a json-object, the returned value is a json-array | |
1390 | of all events. | |
1391 | ||
1392 | Each json-object contains: | |
1393 | ||
1394 | - "name": event's name (json-string) | |
1395 | ||
1396 | Example: | |
1397 | ||
1398 | -> { "execute": "query-events" } | |
1399 | <- { | |
1400 | "return":[ | |
1401 | { | |
1402 | "name":"SHUTDOWN" | |
1403 | }, | |
1404 | { | |
1405 | "name":"RESET" | |
1406 | } | |
1407 | ] | |
1408 | } | |
1409 | ||
1410 | Note: This example has been shortened as the real response is too long. | |
1411 | ||
1412 | EQMP | |
1413 | ||
1414 | { | |
1415 | .name = "query-events", | |
1416 | .args_type = "", | |
1417 | .mhandler.cmd_new = qmp_marshal_input_query_events, | |
1418 | }, | |
1419 | ||
82a56f0d LC |
1420 | SQMP |
1421 | query-chardev | |
1422 | ------------- | |
1423 | ||
1424 | Each device is represented by a json-object. The returned value is a json-array | |
1425 | of all devices. | |
1426 | ||
1427 | Each json-object contain the following: | |
1428 | ||
1429 | - "label": device's label (json-string) | |
1430 | - "filename": device's file (json-string) | |
1431 | ||
1432 | Example: | |
1433 | ||
1434 | -> { "execute": "query-chardev" } | |
1435 | <- { | |
1436 | "return":[ | |
1437 | { | |
1438 | "label":"monitor", | |
1439 | "filename":"stdio" | |
1440 | }, | |
1441 | { | |
1442 | "label":"serial0", | |
1443 | "filename":"vc" | |
1444 | } | |
1445 | ] | |
1446 | } | |
1447 | ||
1448 | EQMP | |
1449 | ||
c5a415a0 LC |
1450 | { |
1451 | .name = "query-chardev", | |
1452 | .args_type = "", | |
1453 | .mhandler.cmd_new = qmp_marshal_input_query_chardev, | |
1454 | }, | |
1455 | ||
82a56f0d LC |
1456 | SQMP |
1457 | query-block | |
1458 | ----------- | |
1459 | ||
1460 | Show the block devices. | |
1461 | ||
1462 | Each block device information is stored in a json-object and the returned value | |
1463 | is a json-array of all devices. | |
1464 | ||
1465 | Each json-object contain the following: | |
1466 | ||
1467 | - "device": device name (json-string) | |
1468 | - "type": device type (json-string) | |
d8aeeb31 MA |
1469 | - deprecated, retained for backward compatibility |
1470 | - Possible values: "unknown" | |
82a56f0d LC |
1471 | - "removable": true if the device is removable, false otherwise (json-bool) |
1472 | - "locked": true if the device is locked, false otherwise (json-bool) | |
e4def80b MA |
1473 | - "tray-open": only present if removable, true if the device has a tray, |
1474 | and it is open (json-bool) | |
82a56f0d LC |
1475 | - "inserted": only present if the device is inserted, it is a json-object |
1476 | containing the following: | |
1477 | - "file": device file name (json-string) | |
1478 | - "ro": true if read-only, false otherwise (json-bool) | |
1479 | - "drv": driver format name (json-string) | |
1480 | - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg", | |
1481 | "file", "file", "ftp", "ftps", "host_cdrom", | |
1482 | "host_device", "host_floppy", "http", "https", | |
1483 | "nbd", "parallels", "qcow", "qcow2", "raw", | |
1484 | "tftp", "vdi", "vmdk", "vpc", "vvfat" | |
1485 | - "backing_file": backing file name (json-string, optional) | |
2e3e3317 | 1486 | - "backing_file_depth": number of files in the backing file chain (json-int) |
82a56f0d | 1487 | - "encrypted": true if encrypted, false otherwise (json-bool) |
727f005e ZYW |
1488 | - "bps": limit total bytes per second (json-int) |
1489 | - "bps_rd": limit read bytes per second (json-int) | |
1490 | - "bps_wr": limit write bytes per second (json-int) | |
1491 | - "iops": limit total I/O operations per second (json-int) | |
1492 | - "iops_rd": limit read operations per second (json-int) | |
1493 | - "iops_wr": limit write operations per second (json-int) | |
1494 | ||
f04ef601 LC |
1495 | - "io-status": I/O operation status, only present if the device supports it |
1496 | and the VM is configured to stop on errors. It's always reset | |
1497 | to "ok" when the "cont" command is issued (json_string, optional) | |
1498 | - Possible values: "ok", "failed", "nospace" | |
82a56f0d LC |
1499 | |
1500 | Example: | |
1501 | ||
1502 | -> { "execute": "query-block" } | |
1503 | <- { | |
1504 | "return":[ | |
1505 | { | |
f04ef601 | 1506 | "io-status": "ok", |
82a56f0d LC |
1507 | "device":"ide0-hd0", |
1508 | "locked":false, | |
1509 | "removable":false, | |
1510 | "inserted":{ | |
1511 | "ro":false, | |
1512 | "drv":"qcow2", | |
1513 | "encrypted":false, | |
727f005e | 1514 | "file":"disks/test.img", |
2e3e3317 | 1515 | "backing_file_depth":0, |
727f005e ZYW |
1516 | "bps":1000000, |
1517 | "bps_rd":0, | |
1518 | "bps_wr":0, | |
1519 | "iops":1000000, | |
1520 | "iops_rd":0, | |
1521 | "iops_wr":0, | |
82a56f0d | 1522 | }, |
d8aeeb31 | 1523 | "type":"unknown" |
82a56f0d LC |
1524 | }, |
1525 | { | |
f04ef601 | 1526 | "io-status": "ok", |
82a56f0d LC |
1527 | "device":"ide1-cd0", |
1528 | "locked":false, | |
1529 | "removable":true, | |
d8aeeb31 | 1530 | "type":"unknown" |
82a56f0d LC |
1531 | }, |
1532 | { | |
1533 | "device":"floppy0", | |
1534 | "locked":false, | |
1535 | "removable":true, | |
d8aeeb31 | 1536 | "type":"unknown" |
82a56f0d LC |
1537 | }, |
1538 | { | |
1539 | "device":"sd0", | |
1540 | "locked":false, | |
1541 | "removable":true, | |
d8aeeb31 | 1542 | "type":"unknown" |
82a56f0d LC |
1543 | } |
1544 | ] | |
1545 | } | |
1546 | ||
1547 | EQMP | |
1548 | ||
b2023818 LC |
1549 | { |
1550 | .name = "query-block", | |
1551 | .args_type = "", | |
1552 | .mhandler.cmd_new = qmp_marshal_input_query_block, | |
1553 | }, | |
1554 | ||
82a56f0d LC |
1555 | SQMP |
1556 | query-blockstats | |
1557 | ---------------- | |
1558 | ||
1559 | Show block device statistics. | |
1560 | ||
1561 | Each device statistic information is stored in a json-object and the returned | |
1562 | value is a json-array of all devices. | |
1563 | ||
1564 | Each json-object contain the following: | |
1565 | ||
1566 | - "device": device name (json-string) | |
1567 | - "stats": A json-object with the statistics information, it contains: | |
1568 | - "rd_bytes": bytes read (json-int) | |
1569 | - "wr_bytes": bytes written (json-int) | |
1570 | - "rd_operations": read operations (json-int) | |
1571 | - "wr_operations": write operations (json-int) | |
e8045d67 | 1572 | - "flush_operations": cache flush operations (json-int) |
c488c7f6 CH |
1573 | - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int) |
1574 | - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int) | |
1575 | - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int) | |
82a56f0d LC |
1576 | - "wr_highest_offset": Highest offset of a sector written since the |
1577 | BlockDriverState has been opened (json-int) | |
1578 | - "parent": Contains recursively the statistics of the underlying | |
1579 | protocol (e.g. the host file for a qcow2 image). If there is | |
1580 | no underlying protocol, this field is omitted | |
1581 | (json-object, optional) | |
1582 | ||
1583 | Example: | |
1584 | ||
1585 | -> { "execute": "query-blockstats" } | |
1586 | <- { | |
1587 | "return":[ | |
1588 | { | |
1589 | "device":"ide0-hd0", | |
1590 | "parent":{ | |
1591 | "stats":{ | |
1592 | "wr_highest_offset":3686448128, | |
1593 | "wr_bytes":9786368, | |
1594 | "wr_operations":751, | |
1595 | "rd_bytes":122567168, | |
1596 | "rd_operations":36772 | |
c488c7f6 CH |
1597 | "wr_total_times_ns":313253456 |
1598 | "rd_total_times_ns":3465673657 | |
1599 | "flush_total_times_ns":49653 | |
e8045d67 | 1600 | "flush_operations":61, |
82a56f0d LC |
1601 | } |
1602 | }, | |
1603 | "stats":{ | |
1604 | "wr_highest_offset":2821110784, | |
1605 | "wr_bytes":9786368, | |
1606 | "wr_operations":692, | |
1607 | "rd_bytes":122739200, | |
1608 | "rd_operations":36604 | |
e8045d67 | 1609 | "flush_operations":51, |
c488c7f6 CH |
1610 | "wr_total_times_ns":313253456 |
1611 | "rd_total_times_ns":3465673657 | |
1612 | "flush_total_times_ns":49653 | |
82a56f0d LC |
1613 | } |
1614 | }, | |
1615 | { | |
1616 | "device":"ide1-cd0", | |
1617 | "stats":{ | |
1618 | "wr_highest_offset":0, | |
1619 | "wr_bytes":0, | |
1620 | "wr_operations":0, | |
1621 | "rd_bytes":0, | |
1622 | "rd_operations":0 | |
e8045d67 | 1623 | "flush_operations":0, |
c488c7f6 CH |
1624 | "wr_total_times_ns":0 |
1625 | "rd_total_times_ns":0 | |
1626 | "flush_total_times_ns":0 | |
82a56f0d LC |
1627 | } |
1628 | }, | |
1629 | { | |
1630 | "device":"floppy0", | |
1631 | "stats":{ | |
1632 | "wr_highest_offset":0, | |
1633 | "wr_bytes":0, | |
1634 | "wr_operations":0, | |
1635 | "rd_bytes":0, | |
1636 | "rd_operations":0 | |
e8045d67 | 1637 | "flush_operations":0, |
c488c7f6 CH |
1638 | "wr_total_times_ns":0 |
1639 | "rd_total_times_ns":0 | |
1640 | "flush_total_times_ns":0 | |
82a56f0d LC |
1641 | } |
1642 | }, | |
1643 | { | |
1644 | "device":"sd0", | |
1645 | "stats":{ | |
1646 | "wr_highest_offset":0, | |
1647 | "wr_bytes":0, | |
1648 | "wr_operations":0, | |
1649 | "rd_bytes":0, | |
1650 | "rd_operations":0 | |
e8045d67 | 1651 | "flush_operations":0, |
c488c7f6 CH |
1652 | "wr_total_times_ns":0 |
1653 | "rd_total_times_ns":0 | |
1654 | "flush_total_times_ns":0 | |
82a56f0d LC |
1655 | } |
1656 | } | |
1657 | ] | |
1658 | } | |
1659 | ||
1660 | EQMP | |
1661 | ||
f11f57e4 LC |
1662 | { |
1663 | .name = "query-blockstats", | |
1664 | .args_type = "", | |
1665 | .mhandler.cmd_new = qmp_marshal_input_query_blockstats, | |
1666 | }, | |
1667 | ||
82a56f0d LC |
1668 | SQMP |
1669 | query-cpus | |
1670 | ---------- | |
1671 | ||
1672 | Show CPU information. | |
1673 | ||
1674 | Return a json-array. Each CPU is represented by a json-object, which contains: | |
1675 | ||
1676 | - "CPU": CPU index (json-int) | |
1677 | - "current": true if this is the current CPU, false otherwise (json-bool) | |
1678 | - "halted": true if the cpu is halted, false otherwise (json-bool) | |
1679 | - Current program counter. The key's name depends on the architecture: | |
1680 | "pc": i386/x86_64 (json-int) | |
1681 | "nip": PPC (json-int) | |
1682 | "pc" and "npc": sparc (json-int) | |
1683 | "PC": mips (json-int) | |
dc7a09cf | 1684 | - "thread_id": ID of the underlying host thread (json-int) |
82a56f0d LC |
1685 | |
1686 | Example: | |
1687 | ||
1688 | -> { "execute": "query-cpus" } | |
1689 | <- { | |
1690 | "return":[ | |
1691 | { | |
1692 | "CPU":0, | |
1693 | "current":true, | |
1694 | "halted":false, | |
1695 | "pc":3227107138 | |
dc7a09cf | 1696 | "thread_id":3134 |
82a56f0d LC |
1697 | }, |
1698 | { | |
1699 | "CPU":1, | |
1700 | "current":false, | |
1701 | "halted":true, | |
1702 | "pc":7108165 | |
dc7a09cf | 1703 | "thread_id":3135 |
82a56f0d LC |
1704 | } |
1705 | ] | |
1706 | } | |
1707 | ||
1708 | EQMP | |
1709 | ||
de0b36b6 LC |
1710 | { |
1711 | .name = "query-cpus", | |
1712 | .args_type = "", | |
1713 | .mhandler.cmd_new = qmp_marshal_input_query_cpus, | |
1714 | }, | |
1715 | ||
82a56f0d LC |
1716 | SQMP |
1717 | query-pci | |
1718 | --------- | |
1719 | ||
1720 | PCI buses and devices information. | |
1721 | ||
1722 | The returned value is a json-array of all buses. Each bus is represented by | |
1723 | a json-object, which has a key with a json-array of all PCI devices attached | |
1724 | to it. Each device is represented by a json-object. | |
1725 | ||
1726 | The bus json-object contains the following: | |
1727 | ||
1728 | - "bus": bus number (json-int) | |
1729 | - "devices": a json-array of json-objects, each json-object represents a | |
1730 | PCI device | |
1731 | ||
1732 | The PCI device json-object contains the following: | |
1733 | ||
1734 | - "bus": identical to the parent's bus number (json-int) | |
1735 | - "slot": slot number (json-int) | |
1736 | - "function": function number (json-int) | |
1737 | - "class_info": a json-object containing: | |
1738 | - "desc": device class description (json-string, optional) | |
1739 | - "class": device class number (json-int) | |
1740 | - "id": a json-object containing: | |
1741 | - "device": device ID (json-int) | |
1742 | - "vendor": vendor ID (json-int) | |
1743 | - "irq": device's IRQ if assigned (json-int, optional) | |
1744 | - "qdev_id": qdev id string (json-string) | |
1745 | - "pci_bridge": It's a json-object, only present if this device is a | |
1746 | PCI bridge, contains: | |
1747 | - "bus": bus number (json-int) | |
1748 | - "secondary": secondary bus number (json-int) | |
1749 | - "subordinate": subordinate bus number (json-int) | |
1750 | - "io_range": I/O memory range information, a json-object with the | |
1751 | following members: | |
1752 | - "base": base address, in bytes (json-int) | |
1753 | - "limit": limit address, in bytes (json-int) | |
1754 | - "memory_range": memory range information, a json-object with the | |
1755 | following members: | |
1756 | - "base": base address, in bytes (json-int) | |
1757 | - "limit": limit address, in bytes (json-int) | |
1758 | - "prefetchable_range": Prefetchable memory range information, a | |
1759 | json-object with the following members: | |
1760 | - "base": base address, in bytes (json-int) | |
1761 | - "limit": limit address, in bytes (json-int) | |
1762 | - "devices": a json-array of PCI devices if there's any attached, each | |
1763 | each element is represented by a json-object, which contains | |
1764 | the same members of the 'PCI device json-object' described | |
1765 | above (optional) | |
1766 | - "regions": a json-array of json-objects, each json-object represents a | |
1767 | memory region of this device | |
1768 | ||
1769 | The memory range json-object contains the following: | |
1770 | ||
1771 | - "base": base memory address (json-int) | |
1772 | - "limit": limit value (json-int) | |
1773 | ||
1774 | The region json-object can be an I/O region or a memory region, an I/O region | |
1775 | json-object contains the following: | |
1776 | ||
1777 | - "type": "io" (json-string, fixed) | |
1778 | - "bar": BAR number (json-int) | |
1779 | - "address": memory address (json-int) | |
1780 | - "size": memory size (json-int) | |
1781 | ||
1782 | A memory region json-object contains the following: | |
1783 | ||
1784 | - "type": "memory" (json-string, fixed) | |
1785 | - "bar": BAR number (json-int) | |
1786 | - "address": memory address (json-int) | |
1787 | - "size": memory size (json-int) | |
1788 | - "mem_type_64": true or false (json-bool) | |
1789 | - "prefetch": true or false (json-bool) | |
1790 | ||
1791 | Example: | |
1792 | ||
1793 | -> { "execute": "query-pci" } | |
1794 | <- { | |
1795 | "return":[ | |
1796 | { | |
1797 | "bus":0, | |
1798 | "devices":[ | |
1799 | { | |
1800 | "bus":0, | |
1801 | "qdev_id":"", | |
1802 | "slot":0, | |
1803 | "class_info":{ | |
1804 | "class":1536, | |
1805 | "desc":"Host bridge" | |
1806 | }, | |
1807 | "id":{ | |
1808 | "device":32902, | |
1809 | "vendor":4663 | |
1810 | }, | |
1811 | "function":0, | |
1812 | "regions":[ | |
1813 | ||
1814 | ] | |
1815 | }, | |
1816 | { | |
1817 | "bus":0, | |
1818 | "qdev_id":"", | |
1819 | "slot":1, | |
1820 | "class_info":{ | |
1821 | "class":1537, | |
1822 | "desc":"ISA bridge" | |
1823 | }, | |
1824 | "id":{ | |
1825 | "device":32902, | |
1826 | "vendor":28672 | |
1827 | }, | |
1828 | "function":0, | |
1829 | "regions":[ | |
1830 | ||
1831 | ] | |
1832 | }, | |
1833 | { | |
1834 | "bus":0, | |
1835 | "qdev_id":"", | |
1836 | "slot":1, | |
1837 | "class_info":{ | |
1838 | "class":257, | |
1839 | "desc":"IDE controller" | |
1840 | }, | |
1841 | "id":{ | |
1842 | "device":32902, | |
1843 | "vendor":28688 | |
1844 | }, | |
1845 | "function":1, | |
1846 | "regions":[ | |
1847 | { | |
1848 | "bar":4, | |
1849 | "size":16, | |
1850 | "address":49152, | |
1851 | "type":"io" | |
1852 | } | |
1853 | ] | |
1854 | }, | |
1855 | { | |
1856 | "bus":0, | |
1857 | "qdev_id":"", | |
1858 | "slot":2, | |
1859 | "class_info":{ | |
1860 | "class":768, | |
1861 | "desc":"VGA controller" | |
1862 | }, | |
1863 | "id":{ | |
1864 | "device":4115, | |
1865 | "vendor":184 | |
1866 | }, | |
1867 | "function":0, | |
1868 | "regions":[ | |
1869 | { | |
1870 | "prefetch":true, | |
1871 | "mem_type_64":false, | |
1872 | "bar":0, | |
1873 | "size":33554432, | |
1874 | "address":4026531840, | |
1875 | "type":"memory" | |
1876 | }, | |
1877 | { | |
1878 | "prefetch":false, | |
1879 | "mem_type_64":false, | |
1880 | "bar":1, | |
1881 | "size":4096, | |
1882 | "address":4060086272, | |
1883 | "type":"memory" | |
1884 | }, | |
1885 | { | |
1886 | "prefetch":false, | |
1887 | "mem_type_64":false, | |
1888 | "bar":6, | |
1889 | "size":65536, | |
1890 | "address":-1, | |
1891 | "type":"memory" | |
1892 | } | |
1893 | ] | |
1894 | }, | |
1895 | { | |
1896 | "bus":0, | |
1897 | "qdev_id":"", | |
1898 | "irq":11, | |
1899 | "slot":4, | |
1900 | "class_info":{ | |
1901 | "class":1280, | |
1902 | "desc":"RAM controller" | |
1903 | }, | |
1904 | "id":{ | |
1905 | "device":6900, | |
1906 | "vendor":4098 | |
1907 | }, | |
1908 | "function":0, | |
1909 | "regions":[ | |
1910 | { | |
1911 | "bar":0, | |
1912 | "size":32, | |
1913 | "address":49280, | |
1914 | "type":"io" | |
1915 | } | |
1916 | ] | |
1917 | } | |
1918 | ] | |
1919 | } | |
1920 | ] | |
1921 | } | |
1922 | ||
1923 | Note: This example has been shortened as the real response is too long. | |
1924 | ||
1925 | EQMP | |
1926 | ||
79627472 LC |
1927 | { |
1928 | .name = "query-pci", | |
1929 | .args_type = "", | |
1930 | .mhandler.cmd_new = qmp_marshal_input_query_pci, | |
1931 | }, | |
1932 | ||
82a56f0d LC |
1933 | SQMP |
1934 | query-kvm | |
1935 | --------- | |
1936 | ||
1937 | Show KVM information. | |
1938 | ||
1939 | Return a json-object with the following information: | |
1940 | ||
1941 | - "enabled": true if KVM support is enabled, false otherwise (json-bool) | |
1942 | - "present": true if QEMU has KVM support, false otherwise (json-bool) | |
1943 | ||
1944 | Example: | |
1945 | ||
1946 | -> { "execute": "query-kvm" } | |
1947 | <- { "return": { "enabled": true, "present": true } } | |
1948 | ||
1949 | EQMP | |
1950 | ||
292a2602 LC |
1951 | { |
1952 | .name = "query-kvm", | |
1953 | .args_type = "", | |
1954 | .mhandler.cmd_new = qmp_marshal_input_query_kvm, | |
1955 | }, | |
1956 | ||
82a56f0d LC |
1957 | SQMP |
1958 | query-status | |
1959 | ------------ | |
1960 | ||
1961 | Return a json-object with the following information: | |
1962 | ||
1963 | - "running": true if the VM is running, or false if it is paused (json-bool) | |
1964 | - "singlestep": true if the VM is in single step mode, | |
1965 | false otherwise (json-bool) | |
9e37b9dc LC |
1966 | - "status": one of the following values (json-string) |
1967 | "debug" - QEMU is running on a debugger | |
1968 | "inmigrate" - guest is paused waiting for an incoming migration | |
1969 | "internal-error" - An internal error that prevents further guest | |
1970 | execution has occurred | |
1971 | "io-error" - the last IOP has failed and the device is configured | |
1972 | to pause on I/O errors | |
1973 | "paused" - guest has been paused via the 'stop' command | |
1974 | "postmigrate" - guest is paused following a successful 'migrate' | |
1975 | "prelaunch" - QEMU was started with -S and guest has not started | |
1976 | "finish-migrate" - guest is paused to finish the migration process | |
1977 | "restore-vm" - guest is paused to restore VM state | |
1978 | "running" - guest is actively running | |
1979 | "save-vm" - guest is paused to save the VM state | |
1980 | "shutdown" - guest is shut down (and -no-shutdown is in use) | |
1981 | "watchdog" - the watchdog action is configured to pause and | |
1982 | has been triggered | |
82a56f0d LC |
1983 | |
1984 | Example: | |
1985 | ||
1986 | -> { "execute": "query-status" } | |
9e37b9dc | 1987 | <- { "return": { "running": true, "singlestep": false, "status": "running" } } |
82a56f0d LC |
1988 | |
1989 | EQMP | |
1fa9a5e4 LC |
1990 | |
1991 | { | |
1992 | .name = "query-status", | |
1993 | .args_type = "", | |
1994 | .mhandler.cmd_new = qmp_marshal_input_query_status, | |
1995 | }, | |
82a56f0d LC |
1996 | |
1997 | SQMP | |
1998 | query-mice | |
1999 | ---------- | |
2000 | ||
2001 | Show VM mice information. | |
2002 | ||
2003 | Each mouse is represented by a json-object, the returned value is a json-array | |
2004 | of all mice. | |
2005 | ||
2006 | The mouse json-object contains the following: | |
2007 | ||
2008 | - "name": mouse's name (json-string) | |
2009 | - "index": mouse's index (json-int) | |
2010 | - "current": true if this mouse is receiving events, false otherwise (json-bool) | |
2011 | - "absolute": true if the mouse generates absolute input events (json-bool) | |
2012 | ||
2013 | Example: | |
2014 | ||
2015 | -> { "execute": "query-mice" } | |
2016 | <- { | |
2017 | "return":[ | |
2018 | { | |
2019 | "name":"QEMU Microsoft Mouse", | |
2020 | "index":0, | |
2021 | "current":false, | |
2022 | "absolute":false | |
2023 | }, | |
2024 | { | |
2025 | "name":"QEMU PS/2 Mouse", | |
2026 | "index":1, | |
2027 | "current":true, | |
2028 | "absolute":true | |
2029 | } | |
2030 | ] | |
2031 | } | |
2032 | ||
2033 | EQMP | |
2034 | ||
e235cec3 LC |
2035 | { |
2036 | .name = "query-mice", | |
2037 | .args_type = "", | |
2038 | .mhandler.cmd_new = qmp_marshal_input_query_mice, | |
2039 | }, | |
2040 | ||
82a56f0d LC |
2041 | SQMP |
2042 | query-vnc | |
2043 | --------- | |
2044 | ||
2045 | Show VNC server information. | |
2046 | ||
2047 | Return a json-object with server information. Connected clients are returned | |
2048 | as a json-array of json-objects. | |
2049 | ||
2050 | The main json-object contains the following: | |
2051 | ||
2052 | - "enabled": true or false (json-bool) | |
2053 | - "host": server's IP address (json-string) | |
2054 | - "family": address family (json-string) | |
2055 | - Possible values: "ipv4", "ipv6", "unix", "unknown" | |
2056 | - "service": server's port number (json-string) | |
2057 | - "auth": authentication method (json-string) | |
2058 | - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight", | |
2059 | "tls", "ultra", "unknown", "vencrypt", "vencrypt", | |
2060 | "vencrypt+plain", "vencrypt+tls+none", | |
2061 | "vencrypt+tls+plain", "vencrypt+tls+sasl", | |
2062 | "vencrypt+tls+vnc", "vencrypt+x509+none", | |
2063 | "vencrypt+x509+plain", "vencrypt+x509+sasl", | |
2064 | "vencrypt+x509+vnc", "vnc" | |
2065 | - "clients": a json-array of all connected clients | |
2066 | ||
2067 | Clients are described by a json-object, each one contain the following: | |
2068 | ||
2069 | - "host": client's IP address (json-string) | |
2070 | - "family": address family (json-string) | |
2071 | - Possible values: "ipv4", "ipv6", "unix", "unknown" | |
2072 | - "service": client's port number (json-string) | |
2073 | - "x509_dname": TLS dname (json-string, optional) | |
2074 | - "sasl_username": SASL username (json-string, optional) | |
2075 | ||
2076 | Example: | |
2077 | ||
2078 | -> { "execute": "query-vnc" } | |
2079 | <- { | |
2080 | "return":{ | |
2081 | "enabled":true, | |
2082 | "host":"0.0.0.0", | |
2083 | "service":"50402", | |
2084 | "auth":"vnc", | |
2085 | "family":"ipv4", | |
2086 | "clients":[ | |
2087 | { | |
2088 | "host":"127.0.0.1", | |
2089 | "service":"50401", | |
2090 | "family":"ipv4" | |
2091 | } | |
2092 | ] | |
2093 | } | |
2094 | } | |
2095 | ||
2096 | EQMP | |
2097 | ||
2b54aa87 LC |
2098 | { |
2099 | .name = "query-vnc", | |
2100 | .args_type = "", | |
2101 | .mhandler.cmd_new = qmp_marshal_input_query_vnc, | |
2102 | }, | |
2103 | ||
cb42a870 GH |
2104 | SQMP |
2105 | query-spice | |
2106 | ----------- | |
2107 | ||
2108 | Show SPICE server information. | |
2109 | ||
2110 | Return a json-object with server information. Connected clients are returned | |
2111 | as a json-array of json-objects. | |
2112 | ||
2113 | The main json-object contains the following: | |
2114 | ||
2115 | - "enabled": true or false (json-bool) | |
2116 | - "host": server's IP address (json-string) | |
2117 | - "port": server's port number (json-int, optional) | |
2118 | - "tls-port": server's port number (json-int, optional) | |
2119 | - "auth": authentication method (json-string) | |
2120 | - Possible values: "none", "spice" | |
2121 | - "channels": a json-array of all active channels clients | |
2122 | ||
2123 | Channels are described by a json-object, each one contain the following: | |
2124 | ||
2125 | - "host": client's IP address (json-string) | |
2126 | - "family": address family (json-string) | |
2127 | - Possible values: "ipv4", "ipv6", "unix", "unknown" | |
2128 | - "port": client's port number (json-string) | |
2129 | - "connection-id": spice connection id. All channels with the same id | |
2130 | belong to the same spice session (json-int) | |
2131 | - "channel-type": channel type. "1" is the main control channel, filter for | |
2132 | this one if you want track spice sessions only (json-int) | |
2133 | - "channel-id": channel id. Usually "0", might be different needed when | |
2134 | multiple channels of the same type exist, such as multiple | |
2135 | display channels in a multihead setup (json-int) | |
2136 | - "tls": whevener the channel is encrypted (json-bool) | |
2137 | ||
2138 | Example: | |
2139 | ||
2140 | -> { "execute": "query-spice" } | |
2141 | <- { | |
2142 | "return": { | |
2143 | "enabled": true, | |
2144 | "auth": "spice", | |
2145 | "port": 5920, | |
2146 | "tls-port": 5921, | |
2147 | "host": "0.0.0.0", | |
2148 | "channels": [ | |
2149 | { | |
2150 | "port": "54924", | |
2151 | "family": "ipv4", | |
2152 | "channel-type": 1, | |
2153 | "connection-id": 1804289383, | |
2154 | "host": "127.0.0.1", | |
2155 | "channel-id": 0, | |
2156 | "tls": true | |
2157 | }, | |
2158 | { | |
2159 | "port": "36710", | |
2160 | "family": "ipv4", | |
2161 | "channel-type": 4, | |
2162 | "connection-id": 1804289383, | |
2163 | "host": "127.0.0.1", | |
2164 | "channel-id": 0, | |
2165 | "tls": false | |
2166 | }, | |
2167 | [ ... more channels follow ... ] | |
2168 | ] | |
2169 | } | |
2170 | } | |
2171 | ||
2172 | EQMP | |
2173 | ||
d1f29646 LC |
2174 | #if defined(CONFIG_SPICE) |
2175 | { | |
2176 | .name = "query-spice", | |
2177 | .args_type = "", | |
2178 | .mhandler.cmd_new = qmp_marshal_input_query_spice, | |
2179 | }, | |
2180 | #endif | |
2181 | ||
82a56f0d LC |
2182 | SQMP |
2183 | query-name | |
2184 | ---------- | |
2185 | ||
2186 | Show VM name. | |
2187 | ||
2188 | Return a json-object with the following information: | |
2189 | ||
2190 | - "name": VM's name (json-string, optional) | |
2191 | ||
2192 | Example: | |
2193 | ||
2194 | -> { "execute": "query-name" } | |
2195 | <- { "return": { "name": "qemu-name" } } | |
2196 | ||
2197 | EQMP | |
2198 | ||
48a32bed AL |
2199 | { |
2200 | .name = "query-name", | |
2201 | .args_type = "", | |
2202 | .mhandler.cmd_new = qmp_marshal_input_query_name, | |
2203 | }, | |
2204 | ||
82a56f0d LC |
2205 | SQMP |
2206 | query-uuid | |
2207 | ---------- | |
2208 | ||
2209 | Show VM UUID. | |
2210 | ||
2211 | Return a json-object with the following information: | |
2212 | ||
2213 | - "UUID": Universally Unique Identifier (json-string) | |
2214 | ||
2215 | Example: | |
2216 | ||
2217 | -> { "execute": "query-uuid" } | |
2218 | <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } | |
2219 | ||
2220 | EQMP | |
2221 | ||
efab767e LC |
2222 | { |
2223 | .name = "query-uuid", | |
2224 | .args_type = "", | |
2225 | .mhandler.cmd_new = qmp_marshal_input_query_uuid, | |
2226 | }, | |
2227 | ||
82a56f0d LC |
2228 | SQMP |
2229 | query-migrate | |
2230 | ------------- | |
2231 | ||
2232 | Migration status. | |
2233 | ||
2234 | Return a json-object. If migration is active there will be another json-object | |
2235 | with RAM migration status and if block migration is active another one with | |
2236 | block migration status. | |
2237 | ||
2238 | The main json-object contains the following: | |
2239 | ||
2240 | - "status": migration status (json-string) | |
2241 | - Possible values: "active", "completed", "failed", "cancelled" | |
2242 | - "ram": only present if "status" is "active", it is a json-object with the | |
2243 | following RAM information (in bytes): | |
2244 | - "transferred": amount transferred (json-int) | |
2245 | - "remaining": amount remaining (json-int) | |
2246 | - "total": total (json-int) | |
62d4e3fe OW |
2247 | - "total-time": total amount of ms since migration started. If |
2248 | migration has ended, it returns the total migration time | |
2249 | (json-int) | |
004d4c10 OW |
2250 | - "duplicate": number of duplicated pages (json-int) |
2251 | - "normal" : number of normal pages transferred (json-int) | |
2252 | - "normal-bytes" : number of normal bytes transferred (json-int) | |
82a56f0d LC |
2253 | - "disk": only present if "status" is "active" and it is a block migration, |
2254 | it is a json-object with the following disk information (in bytes): | |
2255 | - "transferred": amount transferred (json-int) | |
2256 | - "remaining": amount remaining (json-int) | |
2257 | - "total": total (json-int) | |
f36d55af OW |
2258 | - "xbzrle-cache": only present if XBZRLE is active. |
2259 | It is a json-object with the following XBZRLE information: | |
2260 | - "cache-size": XBZRLE cache size | |
2261 | - "bytes": total XBZRLE bytes transferred | |
2262 | - "pages": number of XBZRLE compressed pages | |
2263 | - "cache-miss": number of cache misses | |
2264 | - "overflow": number of XBZRLE overflows | |
82a56f0d LC |
2265 | Examples: |
2266 | ||
2267 | 1. Before the first migration | |
2268 | ||
2269 | -> { "execute": "query-migrate" } | |
2270 | <- { "return": {} } | |
2271 | ||
2272 | 2. Migration is done and has succeeded | |
2273 | ||
2274 | -> { "execute": "query-migrate" } | |
004d4c10 OW |
2275 | <- { "return": { |
2276 | "status": "completed", | |
2277 | "ram":{ | |
2278 | "transferred":123, | |
2279 | "remaining":123, | |
2280 | "total":246, | |
2281 | "total-time":12345, | |
2282 | "duplicate":123, | |
2283 | "normal":123, | |
2284 | "normal-bytes":123456 | |
2285 | } | |
2286 | } | |
2287 | } | |
82a56f0d LC |
2288 | |
2289 | 3. Migration is done and has failed | |
2290 | ||
2291 | -> { "execute": "query-migrate" } | |
2292 | <- { "return": { "status": "failed" } } | |
2293 | ||
2294 | 4. Migration is being performed and is not a block migration: | |
2295 | ||
2296 | -> { "execute": "query-migrate" } | |
2297 | <- { | |
2298 | "return":{ | |
2299 | "status":"active", | |
2300 | "ram":{ | |
2301 | "transferred":123, | |
2302 | "remaining":123, | |
62d4e3fe | 2303 | "total":246, |
004d4c10 OW |
2304 | "total-time":12345, |
2305 | "duplicate":123, | |
2306 | "normal":123, | |
2307 | "normal-bytes":123456 | |
82a56f0d LC |
2308 | } |
2309 | } | |
2310 | } | |
2311 | ||
2312 | 5. Migration is being performed and is a block migration: | |
2313 | ||
2314 | -> { "execute": "query-migrate" } | |
2315 | <- { | |
2316 | "return":{ | |
2317 | "status":"active", | |
2318 | "ram":{ | |
2319 | "total":1057024, | |
2320 | "remaining":1053304, | |
62d4e3fe | 2321 | "transferred":3720, |
004d4c10 OW |
2322 | "total-time":12345, |
2323 | "duplicate":123, | |
2324 | "normal":123, | |
2325 | "normal-bytes":123456 | |
82a56f0d LC |
2326 | }, |
2327 | "disk":{ | |
2328 | "total":20971520, | |
2329 | "remaining":20880384, | |
2330 | "transferred":91136 | |
2331 | } | |
2332 | } | |
2333 | } | |
2334 | ||
f36d55af OW |
2335 | 6. Migration is being performed and XBZRLE is active: |
2336 | ||
2337 | -> { "execute": "query-migrate" } | |
2338 | <- { | |
2339 | "return":{ | |
2340 | "status":"active", | |
2341 | "capabilities" : [ { "capability": "xbzrle", "state" : true } ], | |
2342 | "ram":{ | |
2343 | "total":1057024, | |
2344 | "remaining":1053304, | |
2345 | "transferred":3720, | |
2346 | "total-time":12345, | |
2347 | "duplicate":10, | |
2348 | "normal":3333, | |
2349 | "normal-bytes":3412992 | |
2350 | }, | |
2351 | "xbzrle-cache":{ | |
2352 | "cache-size":67108864, | |
2353 | "bytes":20971520, | |
2354 | "pages":2444343, | |
2355 | "cache-miss":2244, | |
2356 | "overflow":34434 | |
2357 | } | |
2358 | } | |
2359 | } | |
2360 | ||
82a56f0d LC |
2361 | EQMP |
2362 | ||
791e7c82 LC |
2363 | { |
2364 | .name = "query-migrate", | |
2365 | .args_type = "", | |
2366 | .mhandler.cmd_new = qmp_marshal_input_query_migrate, | |
2367 | }, | |
2368 | ||
bbf6da32 | 2369 | SQMP |
00458433 OW |
2370 | migrate-set-capabilities |
2371 | ------- | |
2372 | ||
2373 | Enable/Disable migration capabilities | |
2374 | ||
2375 | - "xbzrle": xbzrle support | |
2376 | ||
2377 | Arguments: | |
2378 | ||
2379 | Example: | |
2380 | ||
2381 | -> { "execute": "migrate-set-capabilities" , "arguments": | |
2382 | { "capabilities": [ { "capability": "xbzrle", "state": true } ] } } | |
2383 | ||
2384 | EQMP | |
2385 | ||
2386 | { | |
2387 | .name = "migrate-set-capabilities", | |
2388 | .args_type = "capabilities:O", | |
2389 | .params = "capability:s,state:b", | |
2390 | .mhandler.cmd_new = qmp_marshal_input_migrate_set_capabilities, | |
2391 | }, | |
2392 | SQMP | |
bbf6da32 OW |
2393 | query-migrate-capabilities |
2394 | ------- | |
2395 | ||
2396 | Query current migration capabilities | |
2397 | ||
2398 | - "capabilities": migration capabilities state | |
2399 | - "xbzrle" : XBZRLE state (json-bool) | |
2400 | ||
2401 | Arguments: | |
2402 | ||
2403 | Example: | |
2404 | ||
2405 | -> { "execute": "query-migrate-capabilities" } | |
2406 | <- { "return": { | |
2407 | "capabilities" : [ { "capability" : "xbzrle", "state" : false } ] | |
2408 | } | |
2409 | } | |
2410 | EQMP | |
2411 | ||
2412 | { | |
2413 | .name = "query-migrate-capabilities", | |
2414 | .args_type = "", | |
2415 | .mhandler.cmd_new = qmp_marshal_input_query_migrate_capabilities, | |
2416 | }, | |
2417 | ||
82a56f0d LC |
2418 | SQMP |
2419 | query-balloon | |
2420 | ------------- | |
2421 | ||
2422 | Show balloon information. | |
2423 | ||
2424 | Make an asynchronous request for balloon info. When the request completes a | |
2425 | json-object will be returned containing the following data: | |
2426 | ||
2427 | - "actual": current balloon value in bytes (json-int) | |
2428 | - "mem_swapped_in": Amount of memory swapped in bytes (json-int, optional) | |
2429 | - "mem_swapped_out": Amount of memory swapped out in bytes (json-int, optional) | |
2430 | - "major_page_faults": Number of major faults (json-int, optional) | |
2431 | - "minor_page_faults": Number of minor faults (json-int, optional) | |
2432 | - "free_mem": Total amount of free and unused memory in | |
2433 | bytes (json-int, optional) | |
2434 | - "total_mem": Total amount of available memory in bytes (json-int, optional) | |
2435 | ||
2436 | Example: | |
2437 | ||
2438 | -> { "execute": "query-balloon" } | |
2439 | <- { | |
2440 | "return":{ | |
2441 | "actual":1073741824, | |
2442 | "mem_swapped_in":0, | |
2443 | "mem_swapped_out":0, | |
2444 | "major_page_faults":142, | |
2445 | "minor_page_faults":239245, | |
2446 | "free_mem":1014185984, | |
2447 | "total_mem":1044668416 | |
2448 | } | |
2449 | } | |
2450 | ||
2451 | EQMP | |
2452 | ||
96637bcd LC |
2453 | { |
2454 | .name = "query-balloon", | |
2455 | .args_type = "", | |
2456 | .mhandler.cmd_new = qmp_marshal_input_query_balloon, | |
2457 | }, | |
b4b12c62 | 2458 | |
fb5458cd SH |
2459 | { |
2460 | .name = "query-block-jobs", | |
2461 | .args_type = "", | |
2462 | .mhandler.cmd_new = qmp_marshal_input_query_block_jobs, | |
2463 | }, | |
2464 | ||
b4b12c62 AL |
2465 | { |
2466 | .name = "qom-list", | |
2467 | .args_type = "path:s", | |
2468 | .mhandler.cmd_new = qmp_marshal_input_qom_list, | |
2469 | }, | |
eb6e8ea5 AL |
2470 | |
2471 | { | |
2472 | .name = "qom-set", | |
b9f8978c | 2473 | .args_type = "path:s,property:s,value:q", |
eb6e8ea5 AL |
2474 | .mhandler.cmd_new = qmp_qom_set, |
2475 | }, | |
2476 | ||
2477 | { | |
2478 | .name = "qom-get", | |
2479 | .args_type = "path:s,property:s", | |
2480 | .mhandler.cmd_new = qmp_qom_get, | |
2481 | }, | |
270b243f LC |
2482 | |
2483 | { | |
2484 | .name = "change-vnc-password", | |
2485 | .args_type = "password:s", | |
2486 | .mhandler.cmd_new = qmp_marshal_input_change_vnc_password, | |
2487 | }, | |
5eeee3fa AL |
2488 | { |
2489 | .name = "qom-list-types", | |
2490 | .args_type = "implements:s?,abstract:b?", | |
2491 | .mhandler.cmd_new = qmp_marshal_input_qom_list_types, | |
2492 | }, | |
1daa31b9 AL |
2493 | |
2494 | { | |
2495 | .name = "device-list-properties", | |
2496 | .args_type = "typename:s", | |
2497 | .mhandler.cmd_new = qmp_marshal_input_device_list_properties, | |
2498 | }, | |
2499 | ||
01d3c80d AL |
2500 | { |
2501 | .name = "query-machines", | |
2502 | .args_type = "", | |
2503 | .mhandler.cmd_new = qmp_marshal_input_query_machines, | |
2504 | }, | |
2505 | ||
e4e31c63 AL |
2506 | { |
2507 | .name = "query-cpu-definitions", | |
2508 | .args_type = "", | |
2509 | .mhandler.cmd_new = qmp_marshal_input_query_cpu_definitions, | |
2510 | }, | |
2511 |