]>
Commit | Line | Data |
---|---|---|
c2953ac5 MW |
1 | # This file tells the frr package which daemons to start. |
2 | # | |
3 | # Entries are in the format: <daemon>=(yes|no|priority) | |
4 | # 0, "no" = disabled | |
5 | # 1, "yes" = highest priority | |
6 | # 2 .. 10 = lower priorities | |
7 | # | |
8 | # For daemons which support multiple instances, a 2nd line listing | |
9 | # the instances can be added. Eg for ospfd: | |
10 | # ospfd=yes | |
11 | # ospfd_instances="1,2" | |
12 | # | |
13 | # Priorities were suggested by Dancer <dancer@zeor.simegen.com>. | |
14 | # They're used to start the FRR daemons in more than one step | |
15 | # (for example start one or two at network initialization and the | |
16 | # rest later). The number of FRR daemons being small, priorities | |
17 | # must be between 1 and 9, inclusive (or the initscript has to be | |
18 | # changed). /etc/init.d/frr then can be started as | |
19 | # | |
20 | # /etc/init.d/frr <start|stop|restart|<priority>> | |
21 | # | |
22 | # where priority 0 is the same as 'stop', priority 10 or 'start' | |
23 | # means 'start all' | |
24 | # | |
25 | # Sample configurations for these daemons can be found in | |
26 | # /usr/share/doc/frr/examples/. | |
27 | # | |
28 | # ATTENTION: | |
29 | # | |
30 | # When activation a daemon at the first time, a config file, even if it is | |
31 | # empty, has to be present *and* be owned by the user and group "frr", else | |
32 | # the daemon will not be started by /etc/init.d/frr. The permissions should | |
33 | # be u=rw,g=r,o=. | |
34 | # When using "vtysh" such a config file is also needed. It should be owned by | |
35 | # group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too. | |
36 | # | |
b13124f0 | 37 | watchfrr_enable=yes |
10ea85ee | 38 | watchfrr_options="-r '/usr/lib/frr/frr restart %s' -s '/usr/lib/frr/frr start %s' -k '/usr/lib/frr/frr stop %s'" |
c2953ac5 MW |
39 | # |
40 | zebra=no | |
41 | bgpd=no | |
42 | ospfd=no | |
43 | ospf6d=no | |
44 | ripd=no | |
45 | ripngd=no | |
46 | isisd=no | |
47 | ldpd=no | |
c27d02aa | 48 | pimd=no |
5a76db68 MW |
49 | nhrpd=no |
50 | eigrpd=no | |
c27d02aa | 51 | babeld=no |
8a71d93d | 52 | sharpd=no |
e5c83d9b | 53 | pbrd=no |
7ac1de8e | 54 | staticd=no |
7134904b | 55 | bfdd=no |
13d9aad8 | 56 | fabricd=no |
7134904b | 57 | |
c2953ac5 MW |
58 | # |
59 | # Command line options for the daemons | |
60 | # | |
61 | zebra_options=("-A 127.0.0.1") | |
62 | bgpd_options=("-A 127.0.0.1") | |
63 | ospfd_options=("-A 127.0.0.1") | |
64 | ospf6d_options=("-A ::1") | |
65 | ripd_options=("-A 127.0.0.1") | |
66 | ripngd_options=("-A ::1") | |
67 | isisd_options=("-A 127.0.0.1") | |
68 | ldpd_options=("-A 127.0.0.1") | |
c27d02aa | 69 | pimd_options=("-A 127.0.0.1") |
5a76db68 MW |
70 | nhrpd_options=("-A 127.0.0.1") |
71 | eigrpd_options=("-A 127.0.0.1") | |
c27d02aa | 72 | babeld_options=("-A 127.0.0.1") |
8a71d93d | 73 | sharpd_options=("-A 127.0.0.1") |
e5c83d9b | 74 | pbrd_options=("-A 127.0.0.1") |
7ac1de8e | 75 | staticd_options=("-A 127.0.0.1") |
7134904b | 76 | bfdd_options=("-A 127.0.0.1") |
13d9aad8 | 77 | fabricd_options=("-A 127.0.0.1") |
c2953ac5 | 78 | |
01c37e58 DS |
79 | # |
80 | # If the vtysh_enable is yes, then the unified config is read | |
81 | # and applied if it exists. If no unified frr.conf exists | |
82 | # then the per-daemon <daemon>.conf files are used) | |
83 | # If vtysh_enable is no or non-existant, the frr.conf is ignored. | |
84 | # it is highly suggested to have this set to yes | |
85 | vtysh_enable=yes | |
86 |