]>
Commit | Line | Data |
---|---|---|
1 | ifupdown2 (1.2.2) unstable; urgency=medium | |
2 | ||
3 | * Support for new iproute2 format (bridge vlan show) | |
4 | * Pypi install: local addons modules should be loaded first | |
5 | * Fix: link-down yes on vrf slaves | |
6 | * Fix: nlmanager: use strerror to format kernel error | |
7 | * Add: new checks for existing device with vxlan attributes | |
8 | * Ethtool: FEC: translate None and NotSupported values to link-fec off | |
9 | ||
10 | -- Julien Fortin <julien@cumulusnetworks.com> Thu, 13 Dec 2018 23:42:42 -0800 | |
11 | ||
12 | ifupdown2 (1.2.1) unstable; urgency=medium | |
13 | ||
14 | * Fix #54: address module new l3_intf_default_gateway_set_onlink policy | |
15 | * Fix: Link down does not work on any intf configured in a VRF | |
16 | * Add: ethtool: add link-speed 10 to valid values array | |
17 | * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT | |
18 | * Add: warning when bridge attribute are used on non br[port] intf | |
19 | * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces | |
20 | * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6) | |
21 | * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute | |
22 | * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT | |
23 | * addressvirtual module_globals "addressvirtual_with_route_metric" policy | |
24 | * Closes: ethtool: link-fec: local variable 'fec_attrs' | |
25 | referencede before assignment | |
26 | * Fix: ifquery -r incorrect for address-virtual and vrf configuration under | |
27 | an interface | |
28 | ||
29 | -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200 | |
30 | ||
31 | ifupdown2 (1.2.0) unstable; urgency=medium | |
32 | ||
33 | * Package architecture refactoring and cleanups | |
34 | * Package can be build/install as debian, pip or rpm package | |
35 | * Makefile to easily perform tasks (i.e.: install, build, test, upload..) | |
36 | * VRF slaves: add support for link-down yes | |
37 | * addressvirtual: macvlan: add default metric to ip4 and ip6 | |
38 | * Closes #48: Run up/down on "manual" interfaces, but ignore any errors. | |
39 | * Closes #58: address addon "vlan_aware_bridge_address_support" policy | |
40 | * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole) | |
41 | * Configuration for IPv6 link-local auto-generate mode, new attributes: | |
42 | ipv6-addrgen (address addon) | |
43 | address-virtual-ipv6-addrgen (addressvirtual addon) | |
44 | ||
45 | -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200 | |
46 | ||
47 | ifupdown2 (1.1.18) unstable; urgency=medium | |
48 | ||
49 | * Fix: Link down does not work on SVI configured in a VRF | |
50 | * Fix: ifreload causes MTU to drop on bridge SVIs | |
51 | * Fix: addons: addressvirtual: check if SVI name is first in routing table | |
52 | * Fix: ifreload error on deleting bond slaves from an already configured bond | |
53 | * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip | |
54 | * Fix: ifupdown2 syntax check needed for vxlan interfaces | |
55 | * Fix: vxlan-ageing default timer doesn't align with bridge-ageing | |
56 | * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied | |
57 | * Fix: using reserved VLAN range reports error but ifreload returns 0 | |
58 | * Fix: unable to set bridge-portmcrouter to "2" | |
59 | * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip | |
60 | * Fix: traditional bridge svi breaks when extra bridge added | |
61 | * Fix: github #39: addons: vrf: fix vrf slave link kind | |
62 | * New. Enabled: addons: vxlan: add support for vxlan-port attribute | |
63 | ||
64 | -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200 | |
65 | ||
66 | ifupdown2 (1.1.17) unstable; urgency=medium | |
67 | ||
68 | * Fix: ip[6]-forward attributes not set at boot | |
69 | ||
70 | -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100 | |
71 | ||
72 | ifupdown2 (1.1.16) unstable; urgency=medium | |
73 | ||
74 | * Fix: python exception on macvlans address dump | |
75 | * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled | |
76 | ||
77 | -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100 | |
78 | ||
79 | ifupdown2 (1.1.15) unstable; urgency=medium | |
80 | ||
81 | * New. Enabled: bridge: add support for bridge-l2protocol-tunnel | |
82 | * New. Enabled: bridge attributes, when removed reset to default | |
83 | * New. Enabled: vxlan attributes, when removed reset to default | |
84 | * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool) | |
85 | * Fix: policy "iface_defaults" not supported for MTU | |
86 | * Fix: address module: handling of ipv4 & ipv6 (add/remove) | |
87 | * Fix: warning for vlan reserved range | |
88 | * Fix: MTU handling on bridge SVIs | |
89 | ||
90 | -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100 | |
91 | ||
92 | ifupdown2 (1.1.14) unstable; urgency=medium | |
93 | ||
94 | * New. Enabled: default policy for bridge MAC address | |
95 | * Fix: ethtool: don't set link speed and duplex if autoneg is on | |
96 | ||
97 | -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200 | |
98 | ||
99 | ifupdown2 (1.1.13) RELEASED; urgency=medium | |
100 | ||
101 | * Fix: VRF: ssh session not killed on ifreload | |
102 | ||
103 | -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200 | |
104 | ||
105 | ifupdown2 (1.1.12) unstable; urgency=medium | |
106 | ||
107 | * New. Enabled: mpls-enable attribute | |
108 | * New. Enabled: bond and bridge module moved to netlink configuration | |
109 | * New. Enabled: handle a mix of auto and specified vrf table ids | |
110 | * Fix: igmp attribute reset to defaults when removed from config | |
111 | ||
112 | -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200 | |
113 | ||
114 | ifupdown2 (1.1.11) unstable; urgency=medium | |
115 | ||
116 | * Fix: link-down attribute not applied on slave ports | |
117 | * Fix: bug that prevented config of mtu below 1280 | |
118 | ||
119 | -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700 | |
120 | ||
121 | ifupdown2 (1.1.10) unstable; urgency=medium | |
122 | ||
123 | * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401) | |
124 | * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598) | |
125 | * New. Enabled: bond-lacp-rate support slow/fast argument | |
126 | * New. Enabled: ifquery --syntax-help: add support for json output | |
127 | * New. Enabled: vlan: add new attribute 'vlan-protocol' | |
128 | * New. Enabled: address: add new attribute 'ip6-forward' | |
129 | * New. Enabled: bridge: add new attribute 'bridge-mcstats' | |
130 | * New. Enabled: bridge: add new attribute 'bridge-vlan-stats' | |
131 | * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol' | |
132 | * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress' | |
133 | * Fix: bond: add attribute bond-(up|down)delay | |
134 | * Fix: bridge-vids: --syntax-check accepts legacy syntax | |
135 | ||
136 | -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200 | |
137 | ||
138 | ifupdown2 (1.1.9) unstable; urgency=medium | |
139 | ||
140 | * New. Enabled: support for bridge-learning attribute | |
141 | ||
142 | -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800 | |
143 | ||
144 | ifupdown2 (1.1.8) unstable; urgency=medium | |
145 | ||
146 | * New. Enabled: update link-speed values: add 25G and 50G | |
147 | * New. Enabled: new 'link-down' [yes|no] attribute to keep link down | |
148 | ||
149 | -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100 | |
150 | ||
151 | ifupdown2 (1.1.7) unstable; urgency=medium | |
152 | ||
153 | * New. Enabled: fix for inet and inet6 dhcp on the same interface | |
154 | * New. Enabled: syntax check to warn on common configuration mistakes | |
155 | * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip | |
156 | and no upperifaces | |
157 | * Fix: fixes for MTU handling | |
158 | * Fix: dhcpv6 fails if interface doesn't have link-local addr | |
159 | ||
160 | -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100 | |
161 | ||
162 | ifupdown2 (1.1.6) unstable; urgency=medium | |
163 | ||
164 | * Closes: github #14. add environment variables passed to user scripts | |
165 | * New. Enabled: addons may provide a list of ifupdown scripts to ignore | |
166 | ||
167 | -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700 | |
168 | ||
169 | ifupdown2 (1.1.5) unstable; urgency=medium | |
170 | ||
171 | * Fix: handling of EXISTS errors on address add | |
172 | * Fix: handling of mtu on addressvirtual macvlan devices | |
173 | * Fix: mako namespace handling | |
174 | ||
175 | -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700 | |
176 | ||
177 | ifupdown2 (1.1.4) unstable; urgency=medium | |
178 | ||
179 | * Performance improvements | |
180 | * New. Enabled: sbin: start-networking: support hotplug class from init script | |
181 | * New. Enabled: support for classical numerical bond modes | |
182 | * New. Enabled: extend ifquery support for mstpctl addons | |
183 | * New. Enabled: each addon may perform semantic and syntax checks by | |
184 | implementing a custom method | |
185 | * Fix: Support for address-virtual lines under a vrf slave | |
186 | * Fix: Defaults for link attributes were not applied | |
187 | * Fix: Disable IPv6 duplicate address detection on VRR interfaces | |
188 | * Fix: ifquery to extract vlan-id from iface if not preset | |
189 | * Fix: ifquery -c bridge pvid error on a valid config | |
190 | ||
191 | -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700 | |
192 | ||
193 | ifupdown2 (1.1.3) unstable; urgency=medium | |
194 | ||
195 | * Fix: Interface configuration parsing error when keyword vlan | |
196 | is the interface name. | |
197 | ||
198 | -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700 | |
199 | ||
200 | ifupdown2 (1.1.2) unstable; urgency=medium | |
201 | ||
202 | * Fix: checks for invalid address-virtual attributes | |
203 | * New. Deprecated: `mstpctl-stp` attribute | |
204 | * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr | |
205 | * New. Enabled: addon module for configuring vrf | |
206 | * New. Enabled: bridge: display warning when (in vlan unware bridge) | |
207 | an untagged bridge is not configured | |
208 | * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu | |
209 | * New. Enabled: introduce checks for reserved vrf table names | |
210 | * New. Enabled: ifquery: new option '--with-defaults' to include default | |
211 | attributes | |
212 | * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port | |
213 | * New. Enabled: vrf awareness in dhcp addon module | |
214 | ||
215 | -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700 | |
216 | ||
217 | ifupdown2 (1.1.0) unstable; urgency=low | |
218 | ||
219 | * Initial release. | |
220 | ||
221 | -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700 |