NEWS

   1 post-v1.10.0
   2 ---------------------
   3     - Stable bond mode has been removed.
   4     - The autopath action has been removed.
   5     - New support for the data encapsulation format of the LISP tunnel
   6       protocol (RFC 6830).  An external control plane or manual flow
   7       setup is required for EID-to-RLOC mapping.
   8     - OpenFlow:
   9       * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
  10         1.1 and later are now implemented.
  11       * New "stack" extension for use in actions, to push and pop from
  12         NXM fields.
  13     - ovs-dpctl:
  14       * New debugging commands "add-flow", "mod-flow", "del-flow".
  15     - New syslog format, prefixed with "ovs|", to be easier to filter.
  16     - RHEL: Removes the default firewall rule that allowed GRE traffic to
  17       pass through. Any users that relied on this automatic firewall hole
  18       will have to manually configure it. The ovs-ctl(8) manpage documents
  19       the "enable-protocol" command that can be used as an alternative.
  20
  21 v1.10.0 - xx xxx xxxx
  22 ---------------------
  23     - Bridge compatibility support has been removed.  Any uses that
  24       rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
  25       or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
  26       of brctl).
  27     - The maximum size of the MAC learning table is now configurable.
  28     - With the Linux datapath, packets for new flows are now queued
  29       separately on a per-port basis, so it should no longer be
  30       possible for a large number of new flows arriving on one port to
  31       prevent new flows from being processed on other ports.
  32     - ovs-vsctl:
  33       * Previously ovs-vsctl would retry connecting to the database forever,
  34         causing it to hang if ovsdb-server was not running.  Now, ovs-vsctl
  35         only tries once by default (use --retry to try forever).  This change
  36         means that you may want to remove uses of --timeout to avoid hangs
  37         in ovs-vsctl calls.
  38       * Many "ovs-vsctl" database commands now accept an --if-exists option.
  39         Please refer to the ovs-vsctl manpage for details.
  40     - OpenFlow:
  41       - Experimental support for newer versions of OpenFlow.  See
  42         the "What versions of OpenFlow does Open vSwitch support?"
  43         question in the FAQ for more details.
  44       - The OpenFlow "dp_desc" may now be configured by setting the
  45         value of other-config:dp-desc in the Bridge table.
  46       - It is possible to request the OpenFlow port number with the
  47         "ofport_request" column in the Interface table.
  48       - The NXM flow_removed message now reports the OpenFlow table ID
  49         from which the flow was removed.
  50     - Tunneling:
  51       - New support for the VXLAN tunnel protocol (see the IETF draft here:
  52         http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
  53       - Tunneling requires the version of the kernel module paired with
  54         Open vSwitch 1.9.0 or later.
  55       - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
  56         is no longer supported.
  57       - Path MTU discovery is no longer supported.
  58       - CAPWAP tunneling support removed.
  59       - Tunnels with multicast destination ports are no longer supported.
  60     - ovs-dpctl:
  61       - The "dump-flows" and "del-flows" no longer require an argument
  62         if only one datapath exists.
  63     - ovs-appctl:
  64       - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
  65         commands available allow control over logging rate limits.
  66       - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
  67         that mimic the equivalent ovs-dpctl commands.
  68     - The ofproto library is now responsible for assigning OpenFlow port
  69       numbers.  An ofproto implementation should assign them when
  70       port_construct() is called.
  71     - All dpif-based bridges of a particular type share a common
  72       datapath called "ovs-<type>", e.g. "ovs-system".  The ovs-dpctl
  73       commands will now return information on that shared datapath.  To
  74       get the equivalent bridge-specific information, use the new
  75       "ovs-appctl dpif/*" commands.
  76     - Backward-incompatible changes:
  77       - Earlier Open vSwitch versions treated ANY as a wildcard in flow
  78         syntax.  OpenFlow 1.1 adds a port named ANY, which introduces a
  79         conflict.  ANY was rarely used in flow syntax, so we chose to
  80         retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
  81     - Patch ports no longer require kernel support, so they now work
  82       with FreeBSD and the kernel module built into Linux 3.3 and later.
  83
  84
  85 v1.9.0 - 26 Feb 2013
  86 ------------------------
  87     - Datapath:
  88       - Support for ipv6 set action.
  89       - SKB mark matching and setting.
  90       - support for Linux kernels up to 3.8
  91     - FreeBSD is now a supported platform, thanks to code contributions from
  92       Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
  93     - ovs-bugtool: New --ovs option to report only OVS related information.
  94     - New %t and %T log escapes to identify the subprogram within a
  95       cooperating group of processes or threads that emitted a log message.
  96       The default log patterns now include this information.
  97     - OpenFlow:
  98       - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
  99         fields in IPv6 neighbor discovery messages, and IPv6 flow label.
 100       - Adds support for writing to the metadata field for a flow.
 101     - Tunneling:
 102       - The tunneling code no longer assumes input and output keys are
 103         symmetric.  If they are not, PMTUD needs to be disabled for
 104         tunneling to work. Note this only applies to flow-based keys.
 105       - New support for a nonstandard form of GRE that supports a 64-bit key.
 106       - Tunnel Path MTU Discovery default value was set to 'disabled'.
 107         This feature is deprecated and will be removed soon.
 108       - Tunnel header caching removed.
 109     - ovs-ofctl:
 110       - Commands and actions that accept port numbers now also accept keywords
 111         that represent those ports (such as LOCAL, NONE, and ALL).  This is
 112         also the recommended way to specify these ports, for compatibility
 113         with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
 114         for these ports for different purposes).
 115     - ovs-dpctl:
 116       - Support requesting the port number with the "port_no" option in
 117         the "add-if" command.
 118     - ovs-pki: The "online PKI" features have been removed, along with
 119       the ovs-pki-cgi program that facilitated it, because of some
 120       alarmist insecurity claims.  We do not believe that these claims
 121       are true, but because we do not know of any users for this
 122       feature it seems better on balance to remove it.  (The ovs-pki-cgi
 123       program was not included in distribution packaging.)
 124     - ovsdb-server now enforces the immutability of immutable columns.  This
 125       was not enforced in earlier versions due to an oversight.
 126     - The following features are now deprecated.  They will be removed no
 127       earlier than February 2013.  Please email dev@openvswitch.org with
 128       concerns.
 129         - Bridge compatibility.
 130         - Stable bond mode.
 131         - The autopath action.
 132         - Interface type "null".
 133         - Numeric values for reserved ports (see "ovs-ofctl" note above).
 134         - Tunnel Path MTU Discovery.
 135         - CAPWAP tunnel support.
 136     - The data in the RARP packets can now be matched in the same way as the
 137       data in ARP packets.
 138
 139
 140 v1.8.0 - 26 Feb 2013
 141 ------------------------
 142     *** Internal only release ***
 143     - New FAQ.  Please send updates and additions!
 144     - Authors of controllers, please read the new section titled "Action
 145       Reproduction" in DESIGN, which describes an Open vSwitch change in
 146       behavior in corner cases that may affect some controllers.
 147     - ovs-l3ping:
 148         - A new test utility that can create L3 tunnel between two Open
 149           vSwitches and detect connectivity issues.
 150     - ovs-ofctl:
 151         - New --sort and --rsort options for "dump-flows" command.
 152         - "mod-port" command can now control all OpenFlow config flags.
 153     - OpenFlow:
 154       - Allow general bitwise masking for IPv4 and IPv6 addresses in
 155         IPv4, IPv6, and ARP packets.  (Previously, only CIDR masks
 156         were allowed.)
 157       - Allow support for arbitrary Ethernet masks.  (Previously, only
 158         the multicast bit in the destination address could be individually
 159         masked.)
 160       - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
 161       - The OFPST_QUEUE request now reports an error if a specified port or
 162         queue does not exist, or for requests for a specific queue on all
 163         ports, if the specified queue does not exist on any port.  (Previous
 164         versions generally reported an empty set of results.)
 165       - New "flow monitor" feature to allow controllers to be notified of
 166         flow table changes as they happen.
 167     - Additional protocols are not mirrored and dropped when forward-bpdu is
 168       false.  For a full list, see the ovs-vswitchd.conf.db man page.
 169     - Open vSwitch now sends RARP packets in situations where it previously
 170       sent a custom protocol, making it consistent with behavior of QEMU and
 171       VMware.
 172     - All Open vSwitch programs and log files now show timestamps in UTC,
 173       instead the local timezone, by default.
 174
 175
 176 v1.7.0 - 30 Jul 2012
 177 ------------------------
 178     - kernel modules are renamed. openvswitch_mod.ko is now
 179       openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
 180     - Increased the number of NXM registers to 8.
 181     - Added ability to configure DSCP setting for manager and controller
 182       connections.  By default, these connections have a DSCP value of
 183       Internetwork Control (0xc0).
 184     - Added the granular link health statistics, 'cfm_health', to an
 185       interface.
 186     - OpenFlow:
 187         - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
 188         - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
 189           multipart messages.
 190     - ovs-ofctl:
 191         - Added the "dump-ports-desc" command to retrieve port
 192           information using the new port description multipart messages.
 193     - ovs-test:
 194         - Added support for spawning ovs-test server from the client.
 195         - Now ovs-test is able to automatically create test bridges and ports.
 196     - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
 197     - Tripled flow setup performance.
 198     - The "coverage/log" command previously available through ovs-appctl
 199       has been replaced by "coverage/show".  The new command replies with
 200       coverage counter values, instead of logging them.
 201
 202
 203 v1.6.1 - 25 Jun 2012
 204 ------------------------
 205     - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
 206
 207
 208 v1.6.0 - 24 Feb 2012
 209 ------------------------
 210     *** Internal only release ***
 211     - bonding
 212         - LACP bonds no longer fall back to balance-slb when negotiations fail.
 213           Instead they drop traffic.
 214         - The default bond_mode changed from SLB to active-backup, to protect
 215           unsuspecting users from the significant risks of SLB bonds (which are
 216           documented in vswitchd/INTERNALS).
 217         - Load balancing can be disabled by setting the bond-rebalance-interval
 218           to zero.
 219     - OpenFlow:
 220         - Added support for bitwise matching on TCP and UDP ports.
 221           See ovs-ofctl(8) for more information.
 222         - NXM flow dumps now include times elapsed toward idle and hard
 223           timeouts.
 224         - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
 225           controllers more precise control over which OpenFlow messages they
 226           receive asynchronously.
 227         - New "fin_timeout" action.
 228         - Added "fin_timeout" support to "learn" action.
 229         - New Nicira action NXAST_CONTROLLER that offers additional features
 230           over output to OFPP_CONTROLLER.
 231     - When QoS settings for an interface do not configure a default queue
 232       (queue 0), Open vSwitch now uses a default configuration for that
 233       queue, instead of dropping all packets as in previous versions.
 234     - Logging:
 235         - Logging to console and file will have UTC timestamp as a default for
 236           all the daemons. An example of the default format is
 237           2012-01-27T16:35:17Z.  ovs-appctl can be used to change the default
 238           format as before.
 239         - The syntax of commands and options to set log levels was simplified,
 240           to make it easier to remember.
 241     - New support for limiting the number of flows in an OpenFlow flow
 242       table, with configurable policy for evicting flows upon
 243       overflow.  See the Flow_Table table in ovs-vswitch.conf.db(5)
 244       for more information.
 245     - New "enable-async-messages" column in the Controller table.  If set to
 246       false, OpenFlow connections to the controller will initially have all
 247       asynchronous messages disabled, overriding normal OpenFlow behavior.
 248     - ofproto-provider interface:
 249         - "struct rule" has a new member "used" that ofproto implementations
 250           should maintain by updating with ofproto_rule_update_used().
 251     - ovsdb-client:
 252         - The new option --timestamp causes the "monitor" command to print
 253           a timestamp with every update.
 254     - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
 255
 256
 257 v1.5.0 - 01 Jun 2012
 258 ------------------------
 259     - OpenFlow:
 260         - Added support for querying, modifying, and deleting flows
 261           based on flow cookie when using NXM.
 262         - Added new NXM_PACKET_IN format.
 263         - Added new NXAST_DEC_TTL action.
 264     - ovs-ofctl:
 265         - Added daemonization support to the monitor and snoop commands.
 266     - ovs-vsctl:
 267         - The "find" command supports new set relational operators
 268           {=}, {!=}, {<}, {>}, {<=}, and {>=}.
 269     - ovsdb-tool now uses the typical database and schema installation
 270       directories as defaults.
 271     - The default MAC learning timeout has been increased from 60 seconds
 272       to 300 seconds.  The MAC learning timeout is now configurable.
 273
 274
 275 v1.4.0 - 30 Jan 2012
 276 ------------------------
 277     - Compatible with Open vSwitch kernel module included in Linux 3.3.
 278     - New "VLAN splinters" feature to work around buggy device drivers
 279       in old Linux versions.  (This feature is deprecated.  When
 280       broken device drivers are no longer in widespread use, we will
 281       delete this feature.)  See ovs-vswitchd.conf.db(5) for more
 282       information.
 283     - OpenFlow:
 284        - Added ability to match on IPv6 flow label through NXM.
 285        - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
 286        - Added ability to match on TTL in IPv4 and IPv6 through NXM.
 287        - Added ability to modify ECN bits in IPv4.
 288        - Added ability to modify TTL in IPv4.
 289     - ovs-vswitchd:
 290        - Don't require the "normal" action to use mirrors.  Traffic will
 291          now be properly mirrored for any flows, regardless of their
 292          actions.
 293        - Track packet and byte statistics sent on mirrors.
 294        - The sFlow implementation can now usually infer the correct agent
 295          device instead of having to be told explicitly.
 296     - ovs-appctl:
 297       - New "fdb/flush" command to flush bridge's MAC learning table.
 298     - ovs-test:
 299       - A new distributed testing tool that allows one to diagnose performance
 300         and connectivity issues. This tool currently is not included in RH or
 301         Xen packages.
 302     - RHEL packaging now supports integration with Red Hat network scripts.
 303     - bonding:
 304       - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
 305         to active-backup.  SLB bonds carry significant risks with them
 306         (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
 307         users from running into.  Users are advised to update any scripts or
 308         configuration which may be negatively impacted by explicitly setting
 309         the bond mode which they want to use.
 310
 311
 312 v1.3.0 - 09 Dec 2011
 313 ------------------------
 314     - OpenFlow:
 315       - Added an OpenFlow extension which allows the "output" action to accept
 316         NXM fields.
 317       - Added an OpenFlow extension for flexible learning.
 318       - Bumped number of NXM registers from four to five.
 319     - ovs-appctl:
 320       - New "version" command to determine version of running daemon.
 321       - If no argument is provided for "cfm/show", displays detailed
 322         information about all interfaces with CFM enabled.
 323       - If no argument is provided for "lacp/show", displays detailed
 324         information about all ports with LACP enabled.
 325     - ovs-dpctl:
 326       - New "set-if" command to modify a datapath port's configuration.
 327     - ovs-vswitchd:
 328       - The software switch now supports 255 OpenFlow tables, instead
 329         of just one.  By default, only table 0 is consulted, but the
 330         new NXAST_RESUBMIT_TABLE action can look up in additional
 331         tables.  Tables 128 and above are reserved for use by the
 332         switch itself; please use only tables 0 through 127.
 333       - Add support for 802.1D spanning tree (STP).
 334     - Fragment handling extensions:
 335       - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
 336         fields are made available for matching in fragments with
 337         offset 0.
 338       - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
 339         via "ip_frag" in ovs-ofctl).
 340       - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
 341         fragment handling policy.
 342     - CAPWAP tunneling now supports an extension to transport a 64-bit key.
 343       By default it remains compatible with the old version and other
 344       standards-based implementations.
 345     - Flow setups are now processed in a round-robin manner across ports
 346       to prevent any single client from monopolizing the CPU and conducting
 347       a denial of service attack.
 348     - Added support for native VLAN tagging.  A new "vlan_mode"
 349       parameter can be set for "port". Possible values: "access",
 350       "trunk", "native-tagged" and "native-untagged".
 351     - test-openflowd has been removed.  Please use ovs-vswitchd instead.
 352
 353 v1.2.0 - 03 Aug 2011
 354 ------------------------
 355     - New "ofproto" abstraction layer to ease porting to hardware
 356       switching ASICs.
 357     - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
 358     - Datapath support for Linux kernels up to 3.0.
 359     - OpenFlow:
 360       - New "bundle" and "bundle_load" action extensions.
 361     - Database:
 362       - Implement table unique constraints.
 363       - Support cooperative locking between callers.
 364     - ovs-dpctl:
 365       - New "-s" option for "show" command prints packet and byte
 366         counters for each port.
 367     - ovs-ofctl:
 368       - New "--readd" option for "replace-flows".
 369     - ovs-vsctl:
 370       - New "show" command to print an overview of configuration.
 371       - New "comment" command to add remark that explains intentions.
 372     - ovs-brcompatd has been rewritten to fix long-standing bugs.
 373     - ovs-openflowd has been renamed test-openflowd and moved into the
 374       tests directory.  Its presence confused too many users.  Please
 375       use ovs-vswitchd instead.
 376     - New ovs-benchmark utility to test flow setup performance.
 377     - A new log level "off" has been added.  Configuring a log facility
 378       "off" prevents any messages from being logged to it.  Previously,
 379       "emer" was effectively "off" because no messages were ever logged at
 380       level "emer".  Now, errors that cause a process to exit are logged
 381       at "emer" level.
 382     - "configure" option --with-l26 has been renamed --with-linux, and
 383       --with-l26-source has been renamed --with-linux-source.  The old
 384       names will be removed after the next release, so please update
 385       your scripts.
 386     - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
 387       datapath/linux-2.6/compat-2.6 directories.
 388     - Feature removals:
 389       - Dropped support for "tun_id_from_cookie" OpenFlow extension.
 390            Please use the extensible match extensions instead.
 391       - Removed the Maintenance_Point and Monitor tables in an effort
 392         to simplify 802.1ag configuration.
 393     - Performance and scalability improvements
 394     - Bug fixes
 395
 396 v1.1.0 - 05 Apr 2011
 397 ------------------------
 398     - Ability to define policies over IPv6
 399     - LACP
 400     - 802.1ag CCM
 401     - Support for extensible match extensions to OpenFlow
 402     - QoS:
 403       - Support for HFSC qdisc.
 404       - Queue used by in-band control can now be configured.
 405     - Kernel:
 406       - Kernel<->userspace interface has been reworked and should be
 407         close to a stable ABI now.
 408       - "Port group" concept has been dropped.
 409     - GRE over IPSEC tunnels
 410     - Bonding:
 411       - New active backup bonding mode.
 412       - New L4 hashing support when LACP is enabled.
 413       - Source MAC hash now includes VLAN field also.
 414       - miimon support.
 415     - Greatly improved handling of large flow tables
 416     - ovs-dpctl:
 417       - "show" command now prints full vport configuration.
 418       - "dump-groups" command removed since kernel support for
 419         port groups was dropped.
 420     - ovs-vsctl:
 421       - New commands for working with the new Managers table.
 422       - "list" command enhanced with new formatting options and --columns
 423         option.
 424       - "get" command now accepts new --id option.
 425       - New "find" command.
 426     - ovs-ofctl:
 427       - New "queue-stats" command for printing queue stats.
 428       - New commands "replace-flows" and "diff-flows".
 429       - Commands to add and remove flows can now read from files.
 430       - New --flow-format option to enable or disable NXM.
 431       - New --more option to increase OpenFlow message verbosity.
 432       - Removed "tun-cookie" command, which is no longer useful.
 433     - ovs-controller enhancements for testing various features.
 434     - New ovs-vlan-test command for testing for Linux kernel driver VLAN
 435       bugs.  New ovs-vlan-bug-workaround command for enabling and
 436       disabling a workaround for these driver bugs.
 437     - OpenFlow support:
 438       - "Resubmit" actions now update flow statistics.
 439       - New "register" extension for use in matching and actions, via NXM.
 440       - New "multipath" experimental action extension.
 441       - New support for matching multicast Ethernet frames, via NXM.
 442       - New extension for OpenFlow vendor error codes.
 443       - New extension to set the QoS output queue without actually
 444         sending to an output port.
 445       - Open vSwitch now reports a single flow table, instead of
 446         separate hash and wildcard tables.  This better models the
 447         current implementation.
 448       - New experimental "note" action.
 449       - New "ofproto/trace" ovs-appctl command and associated utilities
 450         to ease debugging complex flow tables.
 451     - Database:
 452       - Schema documentation now includes an entity-relationship diagram.
 453       - The database is now garbage collected.  In most tables,
 454         unreferenced rows will be deleted automatically.
 455       - Many tables now include statistics updated periodically by
 456         ovs-vswitchd or ovsdb-server.
 457       - Every table now has an "external-ids" column for use by OVS
 458         integrators.
 459       - There is no default controller anymore.  Each bridge must have its
 460         controller individually specified.
 461       - The "fail-mode" is now a property of a Bridge instead of a Controller.
 462       - New versioning and checksum features.
 463       - New Managers table and manager_options column in Open_vSwitch table
 464         for specifying managers.  The old "managers" column in the
 465         Open_vSwitch table has been removed.
 466       - Many "name" columns are now immutable.
 467     - Feature removals:
 468       - Dropped support for XenServer pre-5.6.100.
 469       - Dropped support for Linux pre-2.6.18.
 470       - Dropped controller discovery support.
 471       - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
 472         Statistics reporting in the database is a rough equivalent.
 473       - Dropped the "corekeeper" package (now separate, at
 474         http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
 475     - Performance and scalability improvements
 476     - Bug fixes
 477
 478 v1.1.0pre2 - 13 Sep 2010
 479 ------------------------
 480     - Bug fixes
 481
 482 v1.1.0pre1 - 31 Aug 2010
 483 ------------------------
 484     - OpenFlow 1.0 slicing (QoS) functionality
 485     - Python bindings for configuration database (no write support)
 486     - Performance and scalability improvements
 487     - Bug fixes
 488
 489 v1.0.1 - 31 May 2010
 490 --------------------
 491     - New "patch" interface type
 492     - Bug fixes
 493
 494 v1.0.0 - 15 May 2010
 495 --------------------
 496     - Configuration database with remote management
 497     - OpenFlow 1.0
 498     - GRE tunneling
 499     - Support for XenServer 5.5 and 5.6
 500     - Performance and scalability improvements
 501     - Bug fixes
 502
 503 v0.99.2 - 18 Feb 2010
 504 ---------------------
 505     - Bug fixes
 506
 507 v0.99.1 - 25 Jan 2010
 508 ---------------------
 509     - Add support for sFlow(R)
 510     - Make headers compatible with C++
 511     - Bug fixes
 512
 513 v0.99.0 - 14 Jan 2010
 514 ---------------------
 515     - User-space forwarding engine
 516     - Bug fixes
 517
 518 v0.90.7 - 29 Nov 2009
 519 ---------------------
 520     - Add support for NetFlow active timeouts
 521     - Bug fixes
 522
 523 v0.90.6 - 6 Oct 2009
 524 --------------------
 525     - Bug fixes
 526
 527 v0.90.5 - 21 Sep 2009
 528 ---------------------
 529     - Generalize in-band control to more diverse network setups
 530     - Bug fixes