arch/arm/boot/dts/am335x-phycore-som.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2015 Phytec Messtechnik GmbH
   4  * Author: Teresa Remmet <t.remmet@phytec.de>
   5  */
   6
   7 #include "am33xx.dtsi"
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9
  10 / {
  11         model = "Phytec AM335x phyCORE";
  12         compatible = "phytec,am335x-phycore-som", "ti,am33xx";
  13
  14         aliases {
  15                 rtc0 = &i2c_rtc;
  16                 rtc1 = &rtc;
  17         };
  18
  19         cpus {
  20                 cpu@0 {
  21                         cpu0-supply = <&vdd1_reg>;
  22                 };
  23         };
  24
  25         memory@80000000 {
  26                 device_type = "memory";
  27                 reg = <0x80000000 0x10000000>; /* 256 MB */
  28         };
  29
  30         vcc5v: fixedregulator0 {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "vcc5v";
  33                 regulator-min-microvolt = <5000000>;
  34                 regulator-max-microvolt = <5000000>;
  35                 regulator-boot-on;
  36                 regulator-always-on;
  37         };
  38 };
  39
  40 /* Crypto Module */
  41 &aes {
  42         status = "okay";
  43 };
  44
  45 &sham {
  46         status = "okay";
  47 };
  48
  49 /* EMMC */
  50 &am33xx_pinmux {
  51         emmc_pins: pinmux_emmc_pins {
  52                 pinctrl-single,pins = <
  53                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)       /* gpmc_csn1.mmc1_clk */
  54                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)       /* gpmc_csn2.mmc1_cmd */
  55                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad0.mmc1_dat0 */
  56                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad1.mmc1_dat1 */
  57                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad2.mmc1_dat2 */
  58                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad3.mmc1_dat3 */
  59                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad4.mmc1_dat4 */
  60                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad5.mmc1_dat5 */
  61                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad6.mmc1_dat6 */
  62                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad7.mmc1_dat7 */
  63                 >;
  64         };
  65 };
  66
  67 &mmc2 {
  68         pinctrl-names = "default";
  69         pinctrl-0 = <&emmc_pins>;
  70         vmmc-supply = <&vmmc_reg>;
  71         bus-width = <8>;
  72         ti,non-removable;
  73         status = "disabled";
  74 };
  75
  76 /* Ethernet */
  77 &am33xx_pinmux {
  78         ethernet0_pins: pinmux_ethernet0 {
  79                 pinctrl-single,pins = <
  80                         AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
  81                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
  82                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
  83                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
  84                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
  85                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
  86                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
  87                         AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
  88                 >;
  89         };
  90
  91         mdio_pins: pinmux_mdio {
  92                 pinctrl-single,pins = <
  93                         /* MDIO */
  94                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
  95                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
  96                 >;
  97         };
  98 };
  99
 100 &cpsw_emac0 {
 101         phy-handle = <&phy0>;
 102         phy-mode = "rmii";
 103         dual_emac_res_vlan = <1>;
 104 };
 105
 106 &davinci_mdio {
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&mdio_pins>;
 109         status = "okay";
 110
 111         phy0: ethernet-phy@0 {
 112                 reg = <0>;
 113         };
 114 };
 115
 116 &mac {
 117         slaves = <1>;
 118         pinctrl-names = "default";
 119         pinctrl-0 = <&ethernet0_pins>;
 120         status = "okay";
 121 };
 122
 123 /* I2C Busses */
 124 &am33xx_pinmux {
 125         i2c0_pins: pinmux_i2c0 {
 126                 pinctrl-single,pins = <
 127                         AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 128                         AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
 129                 >;
 130         };
 131 };
 132
 133 &i2c0 {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&i2c0_pins>;
 136         clock-frequency = <400000>;
 137         status = "okay";
 138
 139         tps: pmic@2d {
 140                 reg = <0x2d>;
 141         };
 142
 143         i2c_tmp102: temp@4b {
 144                 compatible = "ti,tmp102";
 145                 reg = <0x4b>;
 146                 status = "disabled";
 147         };
 148
 149         i2c_eeprom: eeprom@52 {
 150                 compatible = "atmel,24c32";
 151                 pagesize = <32>;
 152                 reg = <0x52>;
 153                 status = "disabled";
 154         };
 155
 156         i2c_rtc: rtc@68 {
 157                 compatible = "microcrystal,rv4162";
 158                 reg = <0x68>;
 159                 status = "disabled";
 160         };
 161 };
 162
 163 /* NAND memory */
 164 &am33xx_pinmux {
 165                 nandflash_pins: pinmux_nandflash {
 166                         pinctrl-single,pins = <
 167                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 168                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
 169                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
 170                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
 171                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
 172                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
 173                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
 174                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
 175                         AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
 176                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
 177                         AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
 178                         AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
 179                         AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
 180                         AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
 181                 >;
 182         };
 183 };
 184
 185 &elm {
 186         status = "okay";
 187 };
 188
 189 &gpmc {
 190         status = "disabled";
 191         pinctrl-names = "default";
 192         pinctrl-0 = <&nandflash_pins>;
 193         ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
 194         nandflash: nand@0,0 {
 195                 compatible = "ti,omap2-nand";
 196                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 197                 interrupt-parent = <&gpmc>;
 198                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 199                              <1 IRQ_TYPE_NONE>; /* termcount */
 200                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 201                 nand-bus-width = <8>;
 202                 ti,nand-ecc-opt = "bch8";
 203                 gpmc,device-nand = "true";
 204                 gpmc,device-width = <1>;
 205                 gpmc,sync-clk-ps = <0>;
 206                 gpmc,cs-on-ns = <0>;
 207                 gpmc,cs-rd-off-ns = <30>;
 208                 gpmc,cs-wr-off-ns = <30>;
 209                 gpmc,adv-on-ns = <0>;
 210                 gpmc,adv-rd-off-ns = <30>;
 211                 gpmc,adv-wr-off-ns = <30>;
 212                 gpmc,we-on-ns = <0>;
 213                 gpmc,we-off-ns = <20>;
 214                 gpmc,oe-on-ns = <10>;
 215                 gpmc,oe-off-ns = <30>;
 216                 gpmc,access-ns = <30>;
 217                 gpmc,rd-cycle-ns = <30>;
 218                 gpmc,wr-cycle-ns = <30>;
 219                 gpmc,bus-turnaround-ns = <0>;
 220                 gpmc,cycle2cycle-delay-ns = <50>;
 221                 gpmc,cycle2cycle-diffcsen;
 222                 gpmc,clk-activation-ns = <0>;
 223                 gpmc,wr-access-ns = <30>;
 224                 gpmc,wr-data-mux-bus-ns = <0>;
 225
 226                 ti,elm-id = <&elm>;
 227
 228                 #address-cells = <1>;
 229                 #size-cells = <1>;
 230         };
 231 };
 232
 233 /* Power */
 234 #include "tps65910.dtsi"
 235
 236 &tps {
 237         vcc1-supply = <&vcc5v>;
 238         vcc2-supply = <&vcc5v>;
 239         vcc3-supply = <&vcc5v>;
 240         vcc4-supply = <&vcc5v>;
 241         vcc5-supply = <&vcc5v>;
 242         vcc6-supply = <&vcc5v>;
 243         vcc7-supply = <&vcc5v>;
 244         vccio-supply = <&vcc5v>;
 245
 246         regulators {
 247                 vrtc_reg: regulator@0 {
 248                         regulator-always-on;
 249                 };
 250
 251                 vio_reg: regulator@1 {
 252                         regulator-always-on;
 253                 };
 254
 255                 vdd1_reg: regulator@2 {
 256                         /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
 257                         regulator-name = "vdd_mpu";
 258                         regulator-min-microvolt = <912500>;
 259                         regulator-max-microvolt = <1378000>;
 260                         regulator-boot-on;
 261                         regulator-always-on;
 262                 };
 263
 264                 vdd2_reg: regulator@3 {
 265                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 266                         regulator-name = "vdd_core";
 267                         regulator-min-microvolt = <912500>;
 268                         regulator-max-microvolt = <1150000>;
 269                         regulator-boot-on;
 270                         regulator-always-on;
 271                 };
 272
 273                 vdd3_reg: regulator@4 {
 274                         regulator-always-on;
 275                 };
 276
 277                 vdig1_reg: regulator@5 {
 278                         regulator-name = "vdig1_1p8v";
 279                         regulator-min-microvolt = <1800000>;
 280                         regulator-max-microvolt = <1800000>;
 281                 };
 282
 283                 vdig2_reg: regulator@6 {
 284                         regulator-always-on;
 285                 };
 286
 287                 vpll_reg: regulator@7 {
 288                         regulator-always-on;
 289                 };
 290
 291                 vdac_reg: regulator@8 {
 292                         regulator-always-on;
 293                 };
 294
 295                 vaux1_reg: regulator@9 {
 296                         regulator-always-on;
 297                 };
 298
 299                 vaux2_reg: regulator@10 {
 300                         regulator-always-on;
 301                 };
 302
 303                 vaux33_reg: regulator@11 {
 304                         regulator-always-on;
 305                 };
 306
 307                 vmmc_reg: regulator@12 {
 308                         regulator-min-microvolt = <3300000>;
 309                         regulator-max-microvolt = <3300000>;
 310                         regulator-always-on;
 311                 };
 312         };
 313 };
 314
 315 /* SPI Busses */
 316 &am33xx_pinmux {
 317         spi0_pins: pinmux_spi0 {
 318                 pinctrl-single,pins = <
 319                         AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
 320                         AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
 321                         AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
 322                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
 323                 >;
 324         };
 325 };
 326
 327 &spi0 {
 328         pinctrl-names = "default";
 329         pinctrl-0 = <&spi0_pins>;
 330         status = "okay";
 331
 332         serial_flash: m25p80@0 {
 333                 compatible = "jedec,spi-nor";
 334                 spi-max-frequency = <48000000>;
 335                 reg = <0x0>;
 336                 m25p,fast-read;
 337                 status = "disabled";
 338                 #address-cells = <1>;
 339                 #size-cells = <1>;
 340         };
 341 };