arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
   4  * and Markus Pargmann, Pengutronix
   5  */
   6
   7 /dts-v1/;
   8 #include "imx27.dtsi"
   9
  10 / {
  11         model = "Phytec pca100";
  12         compatible = "phytec,imx27-pca100", "fsl,imx27";
  13
  14         memory@a0000000 {
  15                 device_type = "memory";
  16                 reg = <0xa0000000 0x08000000>; /* 128MB */
  17         };
  18 };
  19
  20 &cspi1 {
  21         cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
  22                    <&gpio4 27 GPIO_ACTIVE_HIGH>;
  23         status = "okay";
  24 };
  25
  26 &fec {
  27         pinctrl-names = "default";
  28         pinctrl-0 = <&pinctrl_fec1>;
  29         status = "okay";
  30 };
  31
  32 &i2c2 {
  33         pinctrl-names = "default";
  34         pinctrl-0 = <&pinctrl_i2c2>;
  35         status = "okay";
  36
  37         at24@52 {
  38                 compatible = "atmel,24c32";
  39                 pagesize = <32>;
  40                 reg = <0x52>;
  41         };
  42 };
  43
  44 &iomuxc {
  45         imx27-phycard-s-som {
  46                 pinctrl_fec1: fec1grp {
  47                         fsl,pins = <
  48                                 MX27_PAD_SD3_CMD__FEC_TXD0 0x0
  49                                 MX27_PAD_SD3_CLK__FEC_TXD1 0x0
  50                                 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
  51                                 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
  52                                 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
  53                                 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
  54                                 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
  55                                 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
  56                                 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
  57                                 MX27_PAD_ATA_DATA7__FEC_MDC 0x0
  58                                 MX27_PAD_ATA_DATA8__FEC_CRS 0x0
  59                                 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
  60                                 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
  61                                 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
  62                                 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
  63                                 MX27_PAD_ATA_DATA13__FEC_COL 0x0
  64                                 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
  65                                 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
  66                         >;
  67                 };
  68
  69                 pinctrl_i2c2: i2c2grp {
  70                         fsl,pins = <
  71                                 MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
  72                                 MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
  73                         >;
  74                 };
  75
  76                 pinctrl_nfc: nfcgrp {
  77                         fsl,pins = <
  78                                 MX27_PAD_NFRB__NFRB 0x0
  79                                 MX27_PAD_NFCLE__NFCLE 0x0
  80                                 MX27_PAD_NFWP_B__NFWP_B 0x0
  81                                 MX27_PAD_NFCE_B__NFCE_B 0x0
  82                                 MX27_PAD_NFALE__NFALE 0x0
  83                                 MX27_PAD_NFRE_B__NFRE_B 0x0
  84                                 MX27_PAD_NFWE_B__NFWE_B 0x0
  85                         >;
  86                 };
  87         };
  88 };
  89
  90 &nfc {
  91         pinctrl-names = "default";
  92         pinctrl-0 = <&pinctrl_nfc>;
  93         nand-bus-width = <8>;
  94         nand-ecc-mode = "hw";
  95         nand-on-flash-bbt;
  96         status = "okay";
  97 };