]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
projects / mirror_ubuntu-hirsute-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
arm64: dts: hisilicon: write the values of property-units into a uint32 array
[mirror_ubuntu-hirsute-kernel.git] / arch / arm64 / boot / dts / hisilicon / hi3798cv200.dtsi
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * DTS File for HiSilicon Hi3798cv200 SoC.
4 *
5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
6 */
7
8 #include <dt-bindings/clock/histb-clock.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/phy/phy.h>
12 #include <dt-bindings/reset/ti-syscon.h>
13
14 / {
15 compatible = "hisilicon,hi3798cv200";
16 interrupt-parent = <&gic>;
17 #address-cells = <2>;
18 #size-cells = <2>;
19
20 psci {
21 compatible = "arm,psci-0.2";
22 method = "smc";
23 };
24
25 cpus {
26 #address-cells = <2>;
27 #size-cells = <0>;
28
29 cpu@0 {
30 compatible = "arm,cortex-a53";
31 device_type = "cpu";
32 reg = <0x0 0x0>;
33 enable-method = "psci";
34 };
35
36 cpu@1 {
37 compatible = "arm,cortex-a53";
38 device_type = "cpu";
39 reg = <0x0 0x1>;
40 enable-method = "psci";
41 };
42
43 cpu@2 {
44 compatible = "arm,cortex-a53";
45 device_type = "cpu";
46 reg = <0x0 0x2>;
47 enable-method = "psci";
48 };
49
50 cpu@3 {
51 compatible = "arm,cortex-a53";
52 device_type = "cpu";
53 reg = <0x0 0x3>;
54 enable-method = "psci";
55 };
56 };
57
58 gic: interrupt-controller@f1001000 {
59 compatible = "arm,gic-400";
60 reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
61 <0x0 0xf1002000 0x0 0x100>; /* GICC */
62 #address-cells = <0>;
63 #interrupt-cells = <3>;
64 interrupt-controller;
65 };
66
67 timer {
68 compatible = "arm,armv8-timer";
69 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
70 IRQ_TYPE_LEVEL_LOW)>,
71 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
72 IRQ_TYPE_LEVEL_LOW)>,
73 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
74 IRQ_TYPE_LEVEL_LOW)>,
75 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
76 IRQ_TYPE_LEVEL_LOW)>;
77 };
78
79 soc: soc@f0000000 {
80 compatible = "simple-bus";
81 #address-cells = <1>;
82 #size-cells = <1>;
83 ranges = <0x0 0x0 0xf0000000 0x10000000>;
84
85 crg: clock-reset-controller@8a22000 {
86 compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
87 reg = <0x8a22000 0x1000>;
88 #clock-cells = <1>;
89 #reset-cells = <2>;
90
91 gmacphyrst: reset-controller {
92 compatible = "ti,syscon-reset";
93 #reset-cells = <1>;
94 ti,reset-bits = <
95 0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
96 0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
97 >;
98 };
99 };
100
101 sysctrl: system-controller@8000000 {
102 compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
103 reg = <0x8000000 0x1000>;
104 #clock-cells = <1>;
105 #reset-cells = <2>;
106 };
107
108 perictrl: peripheral-controller@8a20000 {
109 compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
110 "simple-mfd";
111 reg = <0x8a20000 0x1000>;
112 #address-cells = <1>;
113 #size-cells = <1>;
114 ranges = <0x0 0x8a20000 0x1000>;
115
116 usb2_phy1: usb2-phy@120 {
117 compatible = "hisilicon,hi3798cv200-usb2-phy";
118 reg = <0x120 0x4>;
119 clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
120 resets = <&crg 0xbc 4>;
121 #address-cells = <1>;
122 #size-cells = <0>;
123
124 usb2_phy1_port0: phy@0 {
125 reg = <0>;
126 #phy-cells = <0>;
127 resets = <&crg 0xbc 8>;
128 };
129
130 usb2_phy1_port1: phy@1 {
131 reg = <1>;
132 #phy-cells = <0>;
133 resets = <&crg 0xbc 9>;
134 };
135 };
136
137 usb2_phy2: usb2-phy@124 {
138 compatible = "hisilicon,hi3798cv200-usb2-phy";
139 reg = <0x124 0x4>;
140 clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
141 resets = <&crg 0xbc 6>;
142 #address-cells = <1>;
143 #size-cells = <0>;
144
145 usb2_phy2_port0: phy@0 {
146 reg = <0>;
147 #phy-cells = <0>;
148 resets = <&crg 0xbc 10>;
149 };
150 };
151
152 combphy0: phy@850 {
153 compatible = "hisilicon,hi3798cv200-combphy";
154 reg = <0x850 0x8>;
155 #phy-cells = <1>;
156 clocks = <&crg HISTB_COMBPHY0_CLK>;
157 resets = <&crg 0x188 4>;
158 assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
159 assigned-clock-rates = <100000000>;
160 hisilicon,fixed-mode = <PHY_TYPE_USB3>;
161 };
162
163 combphy1: phy@858 {
164 compatible = "hisilicon,hi3798cv200-combphy";
165 reg = <0x858 0x8>;
166 #phy-cells = <1>;
167 clocks = <&crg HISTB_COMBPHY1_CLK>;
168 resets = <&crg 0x188 12>;
169 assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
170 assigned-clock-rates = <100000000>;
171 hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
172 };
173 };
174
175 pmx0: pinconf@8a21000 {
176 compatible = "pinconf-single";
177 reg = <0x8a21000 0x180>;
178 pinctrl-single,register-width = <32>;
179 pinctrl-single,function-mask = <7>;
180 pinctrl-single,gpio-range = <
181 &range 0 8 2 /* GPIO 0 */
182 &range 8 1 0 /* GPIO 1 */
183 &range 9 4 2
184 &range 13 1 0
185 &range 14 1 1
186 &range 15 1 0
187 &range 16 5 0 /* GPIO 2 */
188 &range 21 3 1
189 &range 24 4 1 /* GPIO 3 */
190 &range 28 2 2
191 &range 86 1 1
192 &range 87 1 0
193 &range 30 4 2 /* GPIO 4 */
194 &range 34 3 0
195 &range 37 1 2
196 &range 38 3 2 /* GPIO 6 */
197 &range 41 5 0
198 &range 46 8 1 /* GPIO 7 */
199 &range 54 8 1 /* GPIO 8 */
200 &range 64 7 1 /* GPIO 9 */
201 &range 71 1 0
202 &range 72 6 1 /* GPIO 10 */
203 &range 78 1 0
204 &range 79 1 1
205 &range 80 6 1 /* GPIO 11 */
206 &range 70 2 1
207 &range 88 8 0 /* GPIO 12 */
208 >;
209
210 range: gpio-range {
211 #pinctrl-single,gpio-range-cells = <3>;
212 };
213 };
214
215 uart0: serial@8b00000 {
216 compatible = "arm,pl011", "arm,primecell";
217 reg = <0x8b00000 0x1000>;
218 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
219 clocks = <&sysctrl HISTB_UART0_CLK>;
220 clock-names = "apb_pclk";
221 status = "disabled";
222 };
223
224 uart2: serial@8b02000 {
225 compatible = "arm,pl011", "arm,primecell";
226 reg = <0x8b02000 0x1000>;
227 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
228 clocks = <&crg HISTB_UART2_CLK>;
229 clock-names = "apb_pclk";
230 status = "disabled";
231 };
232
233 i2c0: i2c@8b10000 {
234 compatible = "hisilicon,hix5hd2-i2c";
235 reg = <0x8b10000 0x1000>;
236 #address-cells = <1>;
237 #size-cells = <0>;
238 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
239 clock-frequency = <400000>;
240 clocks = <&crg HISTB_I2C0_CLK>;
241 status = "disabled";
242 };
243
244 i2c1: i2c@8b11000 {
245 compatible = "hisilicon,hix5hd2-i2c";
246 reg = <0x8b11000 0x1000>;
247 #address-cells = <1>;
248 #size-cells = <0>;
249 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
250 clock-frequency = <400000>;
251 clocks = <&crg HISTB_I2C1_CLK>;
252 status = "disabled";
253 };
254
255 i2c2: i2c@8b12000 {
256 compatible = "hisilicon,hix5hd2-i2c";
257 reg = <0x8b12000 0x1000>;
258 #address-cells = <1>;
259 #size-cells = <0>;
260 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
261 clock-frequency = <400000>;
262 clocks = <&crg HISTB_I2C2_CLK>;
263 status = "disabled";
264 };
265
266 i2c3: i2c@8b13000 {
267 compatible = "hisilicon,hix5hd2-i2c";
268 reg = <0x8b13000 0x1000>;
269 #address-cells = <1>;
270 #size-cells = <0>;
271 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
272 clock-frequency = <400000>;
273 clocks = <&crg HISTB_I2C3_CLK>;
274 status = "disabled";
275 };
276
277 i2c4: i2c@8b14000 {
278 compatible = "hisilicon,hix5hd2-i2c";
279 reg = <0x8b14000 0x1000>;
280 #address-cells = <1>;
281 #size-cells = <0>;
282 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
283 clock-frequency = <400000>;
284 clocks = <&crg HISTB_I2C4_CLK>;
285 status = "disabled";
286 };
287
288 spi0: spi@8b1a000 {
289 compatible = "arm,pl022", "arm,primecell";
290 reg = <0x8b1a000 0x1000>;
291 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
292 num-cs = <1>;
293 cs-gpios = <&gpio7 1 0>;
294 clocks = <&crg HISTB_SPI0_CLK>;
295 clock-names = "apb_pclk";
296 #address-cells = <1>;
297 #size-cells = <0>;
298 status = "disabled";
299 };
300
301 sd0: mmc@9820000 {
302 compatible = "snps,dw-mshc";
303 reg = <0x9820000 0x10000>;
304 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
305 clocks = <&crg HISTB_SDIO0_CIU_CLK>,
306 <&crg HISTB_SDIO0_BIU_CLK>;
307 clock-names = "ciu", "biu";
308 resets = <&crg 0x9c 4>;
309 reset-names = "reset";
310 status = "disabled";
311 };
312
313 emmc: mmc@9830000 {
314 compatible = "hisilicon,hi3798cv200-dw-mshc";
315 reg = <0x9830000 0x10000>;
316 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
317 clocks = <&crg HISTB_MMC_CIU_CLK>,
318 <&crg HISTB_MMC_BIU_CLK>,
319 <&crg HISTB_MMC_SAMPLE_CLK>,
320 <&crg HISTB_MMC_DRV_CLK>;
321 clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
322 resets = <&crg 0xa0 4>;
323 reset-names = "reset";
324 status = "disabled";
325 };
326
327 gpio0: gpio@8b20000 {
328 compatible = "arm,pl061", "arm,primecell";
329 reg = <0x8b20000 0x1000>;
330 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
331 gpio-controller;
332 #gpio-cells = <2>;
333 interrupt-controller;
334 #interrupt-cells = <2>;
335 gpio-ranges = <&pmx0 0 0 8>;
336 clocks = <&crg HISTB_APB_CLK>;
337 clock-names = "apb_pclk";
338 status = "disabled";
339 };
340
341 gpio1: gpio@8b21000 {
342 compatible = "arm,pl061", "arm,primecell";
343 reg = <0x8b21000 0x1000>;
344 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
345 gpio-controller;
346 #gpio-cells = <2>;
347 interrupt-controller;
348 #interrupt-cells = <2>;
349 gpio-ranges = <
350 &pmx0 0 8 1
351 &pmx0 1 9 4
352 &pmx0 5 13 1
353 &pmx0 6 14 1
354 &pmx0 7 15 1
355 >;
356 clocks = <&crg HISTB_APB_CLK>;
357 clock-names = "apb_pclk";
358 status = "disabled";
359 };
360
361 gpio2: gpio@8b22000 {
362 compatible = "arm,pl061", "arm,primecell";
363 reg = <0x8b22000 0x1000>;
364 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
365 gpio-controller;
366 #gpio-cells = <2>;
367 interrupt-controller;
368 #interrupt-cells = <2>;
369 gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
370 clocks = <&crg HISTB_APB_CLK>;
371 clock-names = "apb_pclk";
372 status = "disabled";
373 };
374
375 gpio3: gpio@8b23000 {
376 compatible = "arm,pl061", "arm,primecell";
377 reg = <0x8b23000 0x1000>;
378 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
379 gpio-controller;
380 #gpio-cells = <2>;
381 interrupt-controller;
382 #interrupt-cells = <2>;
383 gpio-ranges = <
384 &pmx0 0 24 4
385 &pmx0 4 28 2
386 &pmx0 6 86 1
387 &pmx0 7 87 1
388 >;
389 clocks = <&crg HISTB_APB_CLK>;
390 clock-names = "apb_pclk";
391 status = "disabled";
392 };
393
394 gpio4: gpio@8b24000 {
395 compatible = "arm,pl061", "arm,primecell";
396 reg = <0x8b24000 0x1000>;
397 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
398 gpio-controller;
399 #gpio-cells = <2>;
400 interrupt-controller;
401 #interrupt-cells = <2>;
402 gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
403 clocks = <&crg HISTB_APB_CLK>;
404 clock-names = "apb_pclk";
405 status = "disabled";
406 };
407
408 gpio5: gpio@8004000 {
409 compatible = "arm,pl061", "arm,primecell";
410 reg = <0x8004000 0x1000>;
411 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
412 gpio-controller;
413 #gpio-cells = <2>;
414 interrupt-controller;
415 #interrupt-cells = <2>;
416 clocks = <&crg HISTB_APB_CLK>;
417 clock-names = "apb_pclk";
418 status = "disabled";
419 };
420
421 gpio6: gpio@8b26000 {
422 compatible = "arm,pl061", "arm,primecell";
423 reg = <0x8b26000 0x1000>;
424 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
425 gpio-controller;
426 #gpio-cells = <2>;
427 interrupt-controller;
428 #interrupt-cells = <2>;
429 gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
430 clocks = <&crg HISTB_APB_CLK>;
431 clock-names = "apb_pclk";
432 status = "disabled";
433 };
434
435 gpio7: gpio@8b27000 {
436 compatible = "arm,pl061", "arm,primecell";
437 reg = <0x8b27000 0x1000>;
438 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
439 gpio-controller;
440 #gpio-cells = <2>;
441 interrupt-controller;
442 #interrupt-cells = <2>;
443 gpio-ranges = <&pmx0 0 46 8>;
444 clocks = <&crg HISTB_APB_CLK>;
445 clock-names = "apb_pclk";
446 status = "disabled";
447 };
448
449 gpio8: gpio@8b28000 {
450 compatible = "arm,pl061", "arm,primecell";
451 reg = <0x8b28000 0x1000>;
452 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
453 gpio-controller;
454 #gpio-cells = <2>;
455 interrupt-controller;
456 #interrupt-cells = <2>;
457 gpio-ranges = <&pmx0 0 54 8>;
458 clocks = <&crg HISTB_APB_CLK>;
459 clock-names = "apb_pclk";
460 status = "disabled";
461 };
462
463 gpio9: gpio@8b29000 {
464 compatible = "arm,pl061", "arm,primecell";
465 reg = <0x8b29000 0x1000>;
466 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
467 gpio-controller;
468 #gpio-cells = <2>;
469 interrupt-controller;
470 #interrupt-cells = <2>;
471 gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
472 clocks = <&crg HISTB_APB_CLK>;
473 clock-names = "apb_pclk";
474 status = "disabled";
475 };
476
477 gpio10: gpio@8b2a000 {
478 compatible = "arm,pl061", "arm,primecell";
479 reg = <0x8b2a000 0x1000>;
480 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
481 gpio-controller;
482 #gpio-cells = <2>;
483 interrupt-controller;
484 #interrupt-cells = <2>;
485 gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
486 clocks = <&crg HISTB_APB_CLK>;
487 clock-names = "apb_pclk";
488 status = "disabled";
489 };
490
491 gpio11: gpio@8b2b000 {
492 compatible = "arm,pl061", "arm,primecell";
493 reg = <0x8b2b000 0x1000>;
494 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
495 gpio-controller;
496 #gpio-cells = <2>;
497 interrupt-controller;
498 #interrupt-cells = <2>;
499 gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
500 clocks = <&crg HISTB_APB_CLK>;
501 clock-names = "apb_pclk";
502 status = "disabled";
503 };
504
505 gpio12: gpio@8b2c000 {
506 compatible = "arm,pl061", "arm,primecell";
507 reg = <0x8b2c000 0x1000>;
508 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
509 gpio-controller;
510 #gpio-cells = <2>;
511 interrupt-controller;
512 #interrupt-cells = <2>;
513 gpio-ranges = <&pmx0 0 88 8>;
514 clocks = <&crg HISTB_APB_CLK>;
515 clock-names = "apb_pclk";
516 status = "disabled";
517 };
518
519 gmac0: ethernet@9840000 {
520 compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
521 reg = <0x9840000 0x1000>,
522 <0x984300c 0x4>;
523 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
524 clocks = <&crg HISTB_ETH0_MAC_CLK>,
525 <&crg HISTB_ETH0_MACIF_CLK>;
526 clock-names = "mac_core", "mac_ifc";
527 resets = <&crg 0xcc 8>,
528 <&crg 0xcc 10>,
529 <&gmacphyrst 0>;
530 reset-names = "mac_core", "mac_ifc", "phy";
531 status = "disabled";
532 };
533
534 gmac1: ethernet@9841000 {
535 compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
536 reg = <0x9841000 0x1000>,
537 <0x9843010 0x4>;
538 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
539 clocks = <&crg HISTB_ETH1_MAC_CLK>,
540 <&crg HISTB_ETH1_MACIF_CLK>;
541 clock-names = "mac_core", "mac_ifc";
542 resets = <&crg 0xcc 9>,
543 <&crg 0xcc 11>,
544 <&gmacphyrst 1>;
545 reset-names = "mac_core", "mac_ifc", "phy";
546 status = "disabled";
547 };
548
549 ir: ir@8001000 {
550 compatible = "hisilicon,hix5hd2-ir";
551 reg = <0x8001000 0x1000>;
552 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
553 clocks = <&sysctrl HISTB_IR_CLK>;
554 status = "disabled";
555 };
556
557 pcie: pcie@9860000 {
558 compatible = "hisilicon,hi3798cv200-pcie";
559 reg = <0x9860000 0x1000>,
560 <0x0 0x2000>,
561 <0x2000000 0x01000000>;
562 reg-names = "control", "rc-dbi", "config";
563 #address-cells = <3>;
564 #size-cells = <2>;
565 device_type = "pci";
566 bus-range = <0x00 0xff>;
567 num-lanes = <1>;
568 ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
569 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
570 interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
571 interrupt-names = "msi";
572 #interrupt-cells = <1>;
573 interrupt-map-mask = <0 0 0 0>;
574 interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
575 clocks = <&crg HISTB_PCIE_AUX_CLK>,
576 <&crg HISTB_PCIE_PIPE_CLK>,
577 <&crg HISTB_PCIE_SYS_CLK>,
578 <&crg HISTB_PCIE_BUS_CLK>;
579 clock-names = "aux", "pipe", "sys", "bus";
580 resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
581 reset-names = "soft", "sys", "bus";
582 phys = <&combphy1 PHY_TYPE_PCIE>;
583 phy-names = "phy";
584 status = "disabled";
585 };
586
587 ohci: ohci@9880000 {
588 compatible = "generic-ohci";
589 reg = <0x9880000 0x10000>;
590 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
591 clocks = <&crg HISTB_USB2_BUS_CLK>,
592 <&crg HISTB_USB2_12M_CLK>,
593 <&crg HISTB_USB2_48M_CLK>;
594 clock-names = "bus", "clk12", "clk48";
595 resets = <&crg 0xb8 12>;
596 reset-names = "bus";
597 phys = <&usb2_phy1_port0>;
598 phy-names = "usb";
599 status = "disabled";
600 };
601
602 ehci: ehci@9890000 {
603 compatible = "generic-ehci";
604 reg = <0x9890000 0x10000>;
605 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
606 clocks = <&crg HISTB_USB2_BUS_CLK>,
607 <&crg HISTB_USB2_PHY_CLK>,
608 <&crg HISTB_USB2_UTMI_CLK>;
609 clock-names = "bus", "phy", "utmi";
610 resets = <&crg 0xb8 12>,
611 <&crg 0xb8 16>,
612 <&crg 0xb8 13>;
613 reset-names = "bus", "phy", "utmi";
614 phys = <&usb2_phy1_port0>;
615 phy-names = "usb";
616 status = "disabled";
617 };
618 };
619 };
Ubuntu Hirsute Linux kernel mirror