debian/patches/61_cciss-doc.patch

   1 Author: Matt Taggart <taggart@debian.org>
   2 Subject: Update cciss examples/docs
   3
   4 Here is a patch that adds examples for cciss to the default smartd.conf
   5 file and adds some more cciss documentation to the manpages. I think this
   6 patch gets things to parity with the 3ware documentation with a couple
   7 minor exceptions
   8
   9 Index: smartmontools/smartd.8.in
  10 ===================================================================
  11 --- smartmontools.orig/smartd.8.in      2013-09-05 13:32:17.291972468 +0200
  12 +++ smartmontools/smartd.8.in   2013-09-05 13:32:17.283972468 +0200
  13 @@ -153,6 +153,10 @@
  14  .SH
  15  OPTIONS
  16
  17 +.B If a cciss controller is used
  18 +then the corresponding block device (/dev/cciss/c?d?) must be listed,
  19 +along with the \'\-d cciss,N\' Directive (see below).
  20 +
  21  .TP
  22  .B \-A PREFIX, \-\-attributelog=PREFIX
  23  Writes \fBsmartd\fP attribute information (normalized and raw
  24 Index: smartmontools/smartd.conf
  25 ===================================================================
  26 --- smartmontools.orig/smartd.conf      2013-09-05 13:32:17.291972468 +0200
  27 +++ smartmontools/smartd.conf   2013-09-05 13:32:17.283972468 +0200
  28 @@ -92,6 +92,12 @@
  29  # NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
  30  #/dev/hdc,0 -a -s L/../../2/01
  31  #/dev/hdc,1 -a -s L/../../2/03
  32 +#
  33 +# Monitor 2 disks connected to the first HP SmartArray controller which
  34 +# uses the cciss driver. Start long tests on Sunday nights and short
  35 +# self-tests every night and send errors to root
  36 +#/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
  37 +#/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
  38
  39  # Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
  40  # self-tests Sundays between 1-2, 2-3, and 3-4 am.
  41 Index: smartmontools/smartd.conf.5.in
  42 ===================================================================
  43 --- smartmontools.orig/smartd.conf.5.in 2013-09-05 13:32:17.291972468 +0200
  44 +++ smartmontools/smartd.conf.5.in      2013-09-05 13:32:17.287972468 +0200
  45 @@ -97,10 +97,11 @@
  46  .B # This is an example smartd startup config file
  47  .B # /usr/local/etc/smartd.conf for monitoring three
  48  .B # ATA disks, three SCSI disks, six ATA disks
  49 -.B # behind two 3ware controllers, three SATA disks
  50 -.B # directly connected to the HighPoint Rocket-
  51 -.B # RAID controller, two SATA disks connected to
  52 -.B # the HighPoint RocketRAID controller via a pmport
  53 +.B # behind two 3ware controllers, two disks on a cciss
  54 +.B # controller, three SATA disks directly connected
  55 +.B # to the HighPoint Rocket-RAID controller,
  56 +.B # two SATA disks connected to the HighPoint
  57 +.B # RocketRAID controller via a pmport
  58  .B # device, four SATA disks connected to an Areca
  59  .B # RAID controller, and one SATA disk.
  60  .B #
  61 @@ -178,6 +179,13 @@
  62  .\" %ENDIF OS FreeBSD
  63  .B #
  64  .nf
  65 +.B # Monitor 2 disks connected to the first HP SmartArray controller which
  66 +.B # uses the cciss driver. Start long tests on Sunday nights and short
  67 +.B # self-tests every night and send errors to root
  68 +.B \ \ /dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
  69 +.B \ \ /dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
  70 +.B #
  71 +.nf
  72  .B # Three SATA disks on a HighPoint RocketRAID controller.
  73  .B # Start short self-tests daily between 1-2, 2-3, and
  74  .B # 3-4 am.
  75 @@ -1497,6 +1505,9 @@
  76  If you want more frequent information, use:
  77  .B -a.
  78
  79 +.B If a cciss controller is used
  80 +then the corresponding block device (/dev/cciss/c?d?) must be listed,
  81 +along with the \'\-d cciss,N\' Directive (see below).
  82  .TP
  83  .B ADDITIONAL DETAILS ABOUT DEVICESCAN
  84  If a non-comment entry in the configuration file is the text