5 menu "ACPI (Advanced Configuration and Power Interface) Support"
7 depends on !IA64_HP_SIM
12 depends on IA64 || X86
17 Advanced Configuration and Power Interface (ACPI) support for
18 Linux requires an ACPI compliant platform (hardware/firmware),
19 and assumes the presence of OS-directed configuration and power
20 management (OSPM) software. This option will enlarge your
23 Linux ACPI provides a robust functional replacement for several
24 legacy configuration and power management interfaces, including
25 the Plug-and-Play BIOS specification (PnP BIOS), the
26 MultiProcessor Specification (MPS), and the Advanced Power
27 Management (APM) specification. If both ACPI and APM support
28 are configured, whichever is loaded first shall be used.
30 The ACPI SourceForge project contains the latest source code,
31 documentation, tools, mailing list subscription, and other
32 information. This project is available at:
33 <http://sourceforge.net/projects/acpi>
35 Linux support for ACPI is based on Intel Corporation's ACPI
36 Component Architecture (ACPI CA). For more information see:
37 <http://developer.intel.com/technology/iapc/acpi>
39 ACPI is an open industry specification co-developed by Compaq,
40 Intel, Microsoft, Phoenix, and Toshiba. The specification is
42 <http://www.acpi.info>
48 depends on X86 && (!SMP || SUSPEND_SMP)
52 This option adds support for ACPI suspend states.
54 With this option, you will be able to put the system "to sleep".
55 Sleep states are low power states for the system and devices. All
56 of the system operating state is saved to either memory or disk
57 (depending on the state), to allow the system to resume operation
58 quickly at your request.
60 Although this option sounds really nifty, barely any of the device
61 drivers have been converted to the new driver model and hence few
62 have proper power management support.
64 This option is not recommended for anyone except those doing driver
65 power management development.
67 config ACPI_SLEEP_PROC_FS
69 depends on ACPI_SLEEP && PROC_FS
72 config ACPI_SLEEP_PROC_SLEEP
73 bool "/proc/acpi/sleep (deprecated)"
74 depends on ACPI_SLEEP_PROC_FS
77 Create /proc/acpi/sleep
78 Deprecated by /sys/power/state
85 This driver adds support for the AC Adapter object, which indicates
86 whether a system is on AC, or not. If you have a system that can
87 switch between A/C and battery, say Y.
94 This driver adds support for battery information through
95 /proc/acpi/battery. If you have a mobile system with a battery,
103 This driver handles events on the power, sleep and lid buttons.
104 A daemon reads /proc/acpi/event and perform user-defined actions
105 such as shutting down the system. This is necessary for
106 software controlled poweroff.
112 This driver implement the ACPI Extensions For Display Adapters
113 for integrated graphics devices on motherboard, as specified in
114 ACPI 2.0 Specification, Appendix B, allowing to perform some basic
115 control like defining the video POST device, retrieving EDID information
116 or to setup a video output, etc.
117 Note that this is an ref. implementation only. It may or may not work
118 for your integrated video device.
121 tristate "Generic Hotkey (EXPERIMENTAL)"
122 depends on EXPERIMENTAL
126 Experimental consolidated hotkey driver.
127 If you are unsure, say N.
133 This driver adds support for ACPI fan devices, allowing user-mode
134 applications to perform basic fan control (on, off, status).
138 depends on EXPERIMENTAL
140 This driver adds support for ACPI controlled docking stations
142 config ACPI_PROCESSOR
146 This driver installs ACPI as the idle handler for Linux, and uses
147 ACPI C2 and C3 processor states to save power, on systems that
148 support it. It is required by several flavors of cpufreq
149 Performance-state drivers.
151 config ACPI_HOTPLUG_CPU
153 depends on ACPI_PROCESSOR && HOTPLUG_CPU
154 select ACPI_CONTAINER
158 tristate "Thermal Zone"
159 depends on ACPI_PROCESSOR
162 This driver adds support for ACPI thermal zones. Most mobile and
163 some desktop systems support ACPI thermal zones. It is HIGHLY
164 recommended that this option be enabled, as your processor(s)
165 may be damaged without it.
170 depends on (X86 || IA64)
171 default y if IA64_GENERIC || IA64_SGI_SN2
174 tristate "ASUS/Medion Laptop Extras"
176 select BACKLIGHT_CLASS_DEVICE
178 This driver provides support for extra features of ACPI-compatible
179 ASUS laptops. As some of Medion laptops are made by ASUS, it may also
180 support some Medion laptops (such as 9675 for example). It makes all
181 the extra buttons generate standard ACPI events that go through
182 /proc/acpi/events, and (on some models) adds support for changing the
183 display brightness and output, switching the LCD backlight on and off,
184 and most importantly, allows you to blink those fancy LEDs intended
185 for reporting mail and wireless status.
187 Note: display switching code is currently considered EXPERIMENTAL,
188 toying with these values may even lock your machine.
190 All settings are changed via /proc/acpi/asus directory entries. Owner
191 and group for these entries can be set with asus_uid and asus_gid
194 More information and a userspace daemon for handling the extra buttons
195 at <http://sourceforge.net/projects/acpi4asus/>.
197 If you have an ACPI-compatible ASUS laptop, say Y or M here. This
198 driver is still under development, so if your laptop is unsupported or
199 something works not quite as expected, please use the mailing list
200 available on the above page (acpi4asus-user@lists.sourceforge.net).
202 NOTE: This driver is deprecated and will probably be removed soon,
203 use asus-laptop instead.
206 tristate "IBM ThinkPad Laptop Extras"
208 select BACKLIGHT_CLASS_DEVICE
210 This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
211 support for Fn-Fx key combinations, Bluetooth control, video
212 output switching, ThinkLight control, UltraBay eject and more.
213 For more information about this driver see <file:Documentation/ibm-acpi.txt>
214 and <http://ibm-acpi.sf.net/> .
216 If you have an IBM ThinkPad laptop, say Y or M here.
219 bool "Legacy Docking Station Support"
221 depends on ACPI_DOCK=n
224 Allows the ibm_acpi driver to handle docking station events.
225 This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will
226 allow locking and removing the laptop from the docking station,
227 but will not properly connect PCI devices.
229 If you are not sure, say N here.
232 tristate "Toshiba Laptop Extras"
234 select BACKLIGHT_CLASS_DEVICE
236 This driver adds support for access to certain system settings
237 on "legacy free" Toshiba laptops. These laptops can be recognized by
238 their lack of a BIOS setup menu and APM support.
240 On these machines, all system configuration is handled through the
241 ACPI. This driver is required for access to controls not covered
242 by the general ACPI drivers, such as LCD brightness, video output,
245 This driver differs from the non-ACPI Toshiba laptop driver (located
246 under "Processor type and features") in several aspects.
247 Configuration is accessed by reading and writing text files in the
248 /proc tree instead of by program interface to /dev. Furthermore, no
249 power management functions are exposed, as those are handled by the
250 general ACPI drivers.
252 More information about this driver is available at
253 <http://memebeam.org/toys/ToshibaAcpiDriver>.
255 If you have a legacy free Toshiba laptop (such as the Libretto L1
258 config ACPI_CUSTOM_DSDT
259 bool "Include Custom DSDT"
260 depends on !STANDALONE
263 This option is to load a custom ACPI DSDT
264 If you don't know what that is, say N.
266 config ACPI_CUSTOM_DSDT_FILE
267 string "Custom DSDT Table file to include"
268 depends on ACPI_CUSTOM_DSDT
271 Enter the full path name to the file which includes the AmlCode
274 config ACPI_BLACKLIST_YEAR
275 int "Disable ACPI for systems before Jan 1st this year" if X86_32
278 enter a 4-digit year, eg. 2001 to disable ACPI by default
279 on platforms with DMI BIOS date before January 1st that year.
280 "acpi=force" can be used to override this mechanism.
282 Enter 0 to disable this mechanism and allow ACPI to
283 run by default no matter what the year. (default)
286 bool "Debug Statements"
289 The ACPI driver can optionally report errors with a great deal
290 of verbosity. Saying Y enables these statements. This will increase
291 your kernel size by around 50K.
297 This driver is required on some systems for the proper operation of
298 the battery and thermal drivers. If you are compiling for a
299 mobile system, say Y.
309 This driver will enable your system to shut down using ACPI, and
310 dump your ACPI DSDT table using /proc/acpi/dsdt.
313 bool "Power Management Timer Support" if EMBEDDED
317 The Power Management Timer is available on all ACPI-capable,
318 in most cases even if ACPI is unusable or blacklisted.
320 This timing source is not affected by power management features
321 like aggressive processor idling, throttling, frequency and/or
322 voltage scaling, unlike the commonly used Time Stamp Counter
325 You should nearly always say Y here because many modern
326 systems require this timer.
328 config ACPI_CONTAINER
329 tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
330 depends on EXPERIMENTAL
331 default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
333 This allows _physical_ insertion and removal of CPUs and memory.
334 This can be useful, for example, on NUMA machines that support
335 ACPI based physical hotplug of nodes, or non-NUMA machines that
336 support physical cpu/memory hot-plug.
338 If one selects "m", this driver can be loaded with
339 "modprobe acpi_container".
341 config ACPI_HOTPLUG_MEMORY
342 tristate "Memory Hotplug"
344 depends on MEMORY_HOTPLUG
347 This driver adds supports for ACPI Memory Hotplug. This driver
348 provides support for fielding notifications on ACPI memory
349 devices (PNP0C80) which represent memory ranges that may be
350 onlined or offlined during runtime.
352 Enabling this driver assumes that your platform hardware
353 and firmware have support for hot-plugging physical memory. If
354 your system does not support physically adding or ripping out
355 memory DIMMs at some platform defined granularity (individually
356 or as a bank) at runtime, then you need not enable this driver.
358 If one selects "m," this driver can be loaded using the following
360 $>modprobe acpi_memhotplug
363 tristate "Smart Battery System (EXPERIMENTAL)"
364 depends on X86 && I2C
365 depends on EXPERIMENTAL
367 This driver adds support for the Smart Battery System.
368 Depends on I2C (Device Drivers ---> I2C support)
369 A "Smart Battery" is quite old and quite rare compared
370 to today's ACPI "Control Method" battery.