]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - drivers/block/paride/pd.c
block: push down BKL into .open and .release
[mirror_ubuntu-zesty-kernel.git] / drivers / block / paride / pd.c
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
4
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
7
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
11
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
15
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
20
21 Where,
22
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
25
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
30
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
36
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
40
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
47
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
50
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
57
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
62
63
64 major You may use this parameter to overide the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
68
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
73
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
79
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
85
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
88
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
92
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
99
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
102
103 */
104
105 /* Changes:
106
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
114
115 */
116
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
121
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
125
126 */
127
128 static int verbose = 0;
129 static int major = PD_MAJOR;
130 static char *name = PD_NAME;
131 static int cluster = 64;
132 static int nice = 0;
133 static int disable = 0;
134
135 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
136 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139
140 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
141
142 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
143
144 /* end of parameters */
145
146 #include <linux/init.h>
147 #include <linux/module.h>
148 #include <linux/gfp.h>
149 #include <linux/fs.h>
150 #include <linux/delay.h>
151 #include <linux/hdreg.h>
152 #include <linux/cdrom.h> /* for the eject ioctl */
153 #include <linux/blkdev.h>
154 #include <linux/blkpg.h>
155 #include <linux/kernel.h>
156 #include <linux/smp_lock.h>
157 #include <asm/uaccess.h>
158 #include <linux/workqueue.h>
159
160 static DEFINE_SPINLOCK(pd_lock);
161
162 module_param(verbose, bool, 0);
163 module_param(major, int, 0);
164 module_param(name, charp, 0);
165 module_param(cluster, int, 0);
166 module_param(nice, int, 0);
167 module_param_array(drive0, int, NULL, 0);
168 module_param_array(drive1, int, NULL, 0);
169 module_param_array(drive2, int, NULL, 0);
170 module_param_array(drive3, int, NULL, 0);
171
172 #include "paride.h"
173
174 #define PD_BITS 4
175
176 /* numbers for "SCSI" geometry */
177
178 #define PD_LOG_HEADS 64
179 #define PD_LOG_SECTS 32
180
181 #define PD_ID_OFF 54
182 #define PD_ID_LEN 14
183
184 #define PD_MAX_RETRIES 5
185 #define PD_TMO 800 /* interrupt timeout in jiffies */
186 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
187
188 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
189
190 #define STAT_ERR 0x00001
191 #define STAT_INDEX 0x00002
192 #define STAT_ECC 0x00004
193 #define STAT_DRQ 0x00008
194 #define STAT_SEEK 0x00010
195 #define STAT_WRERR 0x00020
196 #define STAT_READY 0x00040
197 #define STAT_BUSY 0x00080
198
199 #define ERR_AMNF 0x00100
200 #define ERR_TK0NF 0x00200
201 #define ERR_ABRT 0x00400
202 #define ERR_MCR 0x00800
203 #define ERR_IDNF 0x01000
204 #define ERR_MC 0x02000
205 #define ERR_UNC 0x04000
206 #define ERR_TMO 0x10000
207
208 #define IDE_READ 0x20
209 #define IDE_WRITE 0x30
210 #define IDE_READ_VRFY 0x40
211 #define IDE_INIT_DEV_PARMS 0x91
212 #define IDE_STANDBY 0x96
213 #define IDE_ACKCHANGE 0xdb
214 #define IDE_DOORLOCK 0xde
215 #define IDE_DOORUNLOCK 0xdf
216 #define IDE_IDENTIFY 0xec
217 #define IDE_EJECT 0xed
218
219 #define PD_NAMELEN 8
220
221 struct pd_unit {
222 struct pi_adapter pia; /* interface to paride layer */
223 struct pi_adapter *pi;
224 int access; /* count of active opens ... */
225 int capacity; /* Size of this volume in sectors */
226 int heads; /* physical geometry */
227 int sectors;
228 int cylinders;
229 int can_lba;
230 int drive; /* master=0 slave=1 */
231 int changed; /* Have we seen a disk change ? */
232 int removable; /* removable media device ? */
233 int standby;
234 int alt_geom;
235 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
236 struct gendisk *gd;
237 };
238
239 static struct pd_unit pd[PD_UNITS];
240
241 static char pd_scratch[512]; /* scratch block buffer */
242
243 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
244 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
245 "IDNF", "MC", "UNC", "???", "TMO"
246 };
247
248 static inline int status_reg(struct pd_unit *disk)
249 {
250 return pi_read_regr(disk->pi, 1, 6);
251 }
252
253 static inline int read_reg(struct pd_unit *disk, int reg)
254 {
255 return pi_read_regr(disk->pi, 0, reg);
256 }
257
258 static inline void write_status(struct pd_unit *disk, int val)
259 {
260 pi_write_regr(disk->pi, 1, 6, val);
261 }
262
263 static inline void write_reg(struct pd_unit *disk, int reg, int val)
264 {
265 pi_write_regr(disk->pi, 0, reg, val);
266 }
267
268 static inline u8 DRIVE(struct pd_unit *disk)
269 {
270 return 0xa0+0x10*disk->drive;
271 }
272
273 /* ide command interface */
274
275 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
276 {
277 int i;
278
279 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
280 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
281 if (status & (1 << i))
282 printk(" %s", pd_errs[i]);
283 printk("\n");
284 }
285
286 static void pd_reset(struct pd_unit *disk)
287 { /* called only for MASTER drive */
288 write_status(disk, 4);
289 udelay(50);
290 write_status(disk, 0);
291 udelay(250);
292 }
293
294 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
295
296 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
297 { /* polled wait */
298 int k, r, e;
299
300 k = 0;
301 while (k < PD_SPIN) {
302 r = status_reg(disk);
303 k++;
304 if (((r & w) == w) && !(r & STAT_BUSY))
305 break;
306 udelay(PD_SPIN_DEL);
307 }
308 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
309 if (k >= PD_SPIN)
310 e |= ERR_TMO;
311 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
312 pd_print_error(disk, msg, e);
313 return e;
314 }
315
316 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
317 {
318 write_reg(disk, 6, DRIVE(disk) + h);
319 write_reg(disk, 1, 0); /* the IDE task file */
320 write_reg(disk, 2, n);
321 write_reg(disk, 3, s);
322 write_reg(disk, 4, c0);
323 write_reg(disk, 5, c1);
324 write_reg(disk, 7, func);
325
326 udelay(1);
327 }
328
329 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
330 {
331 int c1, c0, h, s;
332
333 if (disk->can_lba) {
334 s = block & 255;
335 c0 = (block >>= 8) & 255;
336 c1 = (block >>= 8) & 255;
337 h = ((block >>= 8) & 15) + 0x40;
338 } else {
339 s = (block % disk->sectors) + 1;
340 h = (block /= disk->sectors) % disk->heads;
341 c0 = (block /= disk->heads) % 256;
342 c1 = (block >>= 8);
343 }
344 pd_send_command(disk, count, s, h, c0, c1, func);
345 }
346
347 /* The i/o request engine */
348
349 enum action {Fail = 0, Ok = 1, Hold, Wait};
350
351 static struct request *pd_req; /* current request */
352 static enum action (*phase)(void);
353
354 static void run_fsm(void);
355
356 static void ps_tq_int(struct work_struct *work);
357
358 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
359
360 static void schedule_fsm(void)
361 {
362 if (!nice)
363 schedule_delayed_work(&fsm_tq, 0);
364 else
365 schedule_delayed_work(&fsm_tq, nice-1);
366 }
367
368 static void ps_tq_int(struct work_struct *work)
369 {
370 run_fsm();
371 }
372
373 static enum action do_pd_io_start(void);
374 static enum action pd_special(void);
375 static enum action do_pd_read_start(void);
376 static enum action do_pd_write_start(void);
377 static enum action do_pd_read_drq(void);
378 static enum action do_pd_write_done(void);
379
380 static struct request_queue *pd_queue;
381 static int pd_claimed;
382
383 static struct pd_unit *pd_current; /* current request's drive */
384 static PIA *pi_current; /* current request's PIA */
385
386 static void run_fsm(void)
387 {
388 while (1) {
389 enum action res;
390 unsigned long saved_flags;
391 int stop = 0;
392
393 if (!phase) {
394 pd_current = pd_req->rq_disk->private_data;
395 pi_current = pd_current->pi;
396 phase = do_pd_io_start;
397 }
398
399 switch (pd_claimed) {
400 case 0:
401 pd_claimed = 1;
402 if (!pi_schedule_claimed(pi_current, run_fsm))
403 return;
404 case 1:
405 pd_claimed = 2;
406 pi_current->proto->connect(pi_current);
407 }
408
409 switch(res = phase()) {
410 case Ok: case Fail:
411 pi_disconnect(pi_current);
412 pd_claimed = 0;
413 phase = NULL;
414 spin_lock_irqsave(&pd_lock, saved_flags);
415 if (!__blk_end_request_cur(pd_req,
416 res == Ok ? 0 : -EIO)) {
417 pd_req = blk_fetch_request(pd_queue);
418 if (!pd_req)
419 stop = 1;
420 }
421 spin_unlock_irqrestore(&pd_lock, saved_flags);
422 if (stop)
423 return;
424 case Hold:
425 schedule_fsm();
426 return;
427 case Wait:
428 pi_disconnect(pi_current);
429 pd_claimed = 0;
430 }
431 }
432 }
433
434 static int pd_retries = 0; /* i/o error retry count */
435 static int pd_block; /* address of next requested block */
436 static int pd_count; /* number of blocks still to do */
437 static int pd_run; /* sectors in current cluster */
438 static int pd_cmd; /* current command READ/WRITE */
439 static char *pd_buf; /* buffer for request in progress */
440
441 static enum action do_pd_io_start(void)
442 {
443 if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
444 phase = pd_special;
445 return pd_special();
446 }
447
448 pd_cmd = rq_data_dir(pd_req);
449 if (pd_cmd == READ || pd_cmd == WRITE) {
450 pd_block = blk_rq_pos(pd_req);
451 pd_count = blk_rq_cur_sectors(pd_req);
452 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
453 return Fail;
454 pd_run = blk_rq_sectors(pd_req);
455 pd_buf = pd_req->buffer;
456 pd_retries = 0;
457 if (pd_cmd == READ)
458 return do_pd_read_start();
459 else
460 return do_pd_write_start();
461 }
462 return Fail;
463 }
464
465 static enum action pd_special(void)
466 {
467 enum action (*func)(struct pd_unit *) = pd_req->special;
468 return func(pd_current);
469 }
470
471 static int pd_next_buf(void)
472 {
473 unsigned long saved_flags;
474
475 pd_count--;
476 pd_run--;
477 pd_buf += 512;
478 pd_block++;
479 if (!pd_run)
480 return 1;
481 if (pd_count)
482 return 0;
483 spin_lock_irqsave(&pd_lock, saved_flags);
484 __blk_end_request_cur(pd_req, 0);
485 pd_count = blk_rq_cur_sectors(pd_req);
486 pd_buf = pd_req->buffer;
487 spin_unlock_irqrestore(&pd_lock, saved_flags);
488 return 0;
489 }
490
491 static unsigned long pd_timeout;
492
493 static enum action do_pd_read_start(void)
494 {
495 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
496 if (pd_retries < PD_MAX_RETRIES) {
497 pd_retries++;
498 return Wait;
499 }
500 return Fail;
501 }
502 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
503 phase = do_pd_read_drq;
504 pd_timeout = jiffies + PD_TMO;
505 return Hold;
506 }
507
508 static enum action do_pd_write_start(void)
509 {
510 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
511 if (pd_retries < PD_MAX_RETRIES) {
512 pd_retries++;
513 return Wait;
514 }
515 return Fail;
516 }
517 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
518 while (1) {
519 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
520 if (pd_retries < PD_MAX_RETRIES) {
521 pd_retries++;
522 return Wait;
523 }
524 return Fail;
525 }
526 pi_write_block(pd_current->pi, pd_buf, 512);
527 if (pd_next_buf())
528 break;
529 }
530 phase = do_pd_write_done;
531 pd_timeout = jiffies + PD_TMO;
532 return Hold;
533 }
534
535 static inline int pd_ready(void)
536 {
537 return !(status_reg(pd_current) & STAT_BUSY);
538 }
539
540 static enum action do_pd_read_drq(void)
541 {
542 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
543 return Hold;
544
545 while (1) {
546 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
547 if (pd_retries < PD_MAX_RETRIES) {
548 pd_retries++;
549 phase = do_pd_read_start;
550 return Wait;
551 }
552 return Fail;
553 }
554 pi_read_block(pd_current->pi, pd_buf, 512);
555 if (pd_next_buf())
556 break;
557 }
558 return Ok;
559 }
560
561 static enum action do_pd_write_done(void)
562 {
563 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
564 return Hold;
565
566 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
567 if (pd_retries < PD_MAX_RETRIES) {
568 pd_retries++;
569 phase = do_pd_write_start;
570 return Wait;
571 }
572 return Fail;
573 }
574 return Ok;
575 }
576
577 /* special io requests */
578
579 /* According to the ATA standard, the default CHS geometry should be
580 available following a reset. Some Western Digital drives come up
581 in a mode where only LBA addresses are accepted until the device
582 parameters are initialised.
583 */
584
585 static void pd_init_dev_parms(struct pd_unit *disk)
586 {
587 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
588 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
589 IDE_INIT_DEV_PARMS);
590 udelay(300);
591 pd_wait_for(disk, 0, "Initialise device parameters");
592 }
593
594 static enum action pd_door_lock(struct pd_unit *disk)
595 {
596 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
597 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
598 pd_wait_for(disk, STAT_READY, "Lock done");
599 }
600 return Ok;
601 }
602
603 static enum action pd_door_unlock(struct pd_unit *disk)
604 {
605 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
606 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
607 pd_wait_for(disk, STAT_READY, "Lock done");
608 }
609 return Ok;
610 }
611
612 static enum action pd_eject(struct pd_unit *disk)
613 {
614 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
615 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
616 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
617 pd_wait_for(disk, 0, DBMSG("before eject"));
618 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
619 pd_wait_for(disk, 0, DBMSG("after eject"));
620 return Ok;
621 }
622
623 static enum action pd_media_check(struct pd_unit *disk)
624 {
625 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
626 if (!(r & STAT_ERR)) {
627 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
628 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
629 } else
630 disk->changed = 1; /* say changed if other error */
631 if (r & ERR_MC) {
632 disk->changed = 1;
633 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
634 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
635 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
636 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
637 }
638 return Ok;
639 }
640
641 static void pd_standby_off(struct pd_unit *disk)
642 {
643 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
644 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
645 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
646 }
647
648 static enum action pd_identify(struct pd_unit *disk)
649 {
650 int j;
651 char id[PD_ID_LEN + 1];
652
653 /* WARNING: here there may be dragons. reset() applies to both drives,
654 but we call it only on probing the MASTER. This should allow most
655 common configurations to work, but be warned that a reset can clear
656 settings on the SLAVE drive.
657 */
658
659 if (disk->drive == 0)
660 pd_reset(disk);
661
662 write_reg(disk, 6, DRIVE(disk));
663 pd_wait_for(disk, 0, DBMSG("before IDENT"));
664 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
665
666 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
667 return Fail;
668 pi_read_block(disk->pi, pd_scratch, 512);
669 disk->can_lba = pd_scratch[99] & 2;
670 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
671 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
672 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
673 if (disk->can_lba)
674 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
675 else
676 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
677
678 for (j = 0; j < PD_ID_LEN; j++)
679 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
680 j = PD_ID_LEN - 1;
681 while ((j >= 0) && (id[j] <= 0x20))
682 j--;
683 j++;
684 id[j] = 0;
685
686 disk->removable = pd_scratch[0] & 0x80;
687
688 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
689 disk->name, id,
690 disk->drive ? "slave" : "master",
691 disk->capacity, disk->capacity / 2048,
692 disk->cylinders, disk->heads, disk->sectors,
693 disk->removable ? "removable" : "fixed");
694
695 if (disk->capacity)
696 pd_init_dev_parms(disk);
697 if (!disk->standby)
698 pd_standby_off(disk);
699
700 return Ok;
701 }
702
703 /* end of io request engine */
704
705 static void do_pd_request(struct request_queue * q)
706 {
707 if (pd_req)
708 return;
709 pd_req = blk_fetch_request(q);
710 if (!pd_req)
711 return;
712
713 schedule_fsm();
714 }
715
716 static int pd_special_command(struct pd_unit *disk,
717 enum action (*func)(struct pd_unit *disk))
718 {
719 struct request *rq;
720 int err = 0;
721
722 rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
723
724 rq->cmd_type = REQ_TYPE_SPECIAL;
725 rq->special = func;
726
727 err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
728
729 blk_put_request(rq);
730 return err;
731 }
732
733 /* kernel glue structures */
734
735 static int pd_open(struct block_device *bdev, fmode_t mode)
736 {
737 struct pd_unit *disk = bdev->bd_disk->private_data;
738
739 lock_kernel();
740 disk->access++;
741
742 if (disk->removable) {
743 pd_special_command(disk, pd_media_check);
744 pd_special_command(disk, pd_door_lock);
745 }
746 unlock_kernel();
747 return 0;
748 }
749
750 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
751 {
752 struct pd_unit *disk = bdev->bd_disk->private_data;
753
754 if (disk->alt_geom) {
755 geo->heads = PD_LOG_HEADS;
756 geo->sectors = PD_LOG_SECTS;
757 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
758 } else {
759 geo->heads = disk->heads;
760 geo->sectors = disk->sectors;
761 geo->cylinders = disk->cylinders;
762 }
763
764 return 0;
765 }
766
767 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
768 unsigned int cmd, unsigned long arg)
769 {
770 struct pd_unit *disk = bdev->bd_disk->private_data;
771
772 switch (cmd) {
773 case CDROMEJECT:
774 lock_kernel();
775 if (disk->access == 1)
776 pd_special_command(disk, pd_eject);
777 unlock_kernel();
778 return 0;
779 default:
780 return -EINVAL;
781 }
782 }
783
784 static int pd_release(struct gendisk *p, fmode_t mode)
785 {
786 struct pd_unit *disk = p->private_data;
787
788 lock_kernel();
789 if (!--disk->access && disk->removable)
790 pd_special_command(disk, pd_door_unlock);
791 unlock_kernel();
792
793 return 0;
794 }
795
796 static int pd_check_media(struct gendisk *p)
797 {
798 struct pd_unit *disk = p->private_data;
799 int r;
800 if (!disk->removable)
801 return 0;
802 pd_special_command(disk, pd_media_check);
803 r = disk->changed;
804 disk->changed = 0;
805 return r;
806 }
807
808 static int pd_revalidate(struct gendisk *p)
809 {
810 struct pd_unit *disk = p->private_data;
811 if (pd_special_command(disk, pd_identify) == 0)
812 set_capacity(p, disk->capacity);
813 else
814 set_capacity(p, 0);
815 return 0;
816 }
817
818 static const struct block_device_operations pd_fops = {
819 .owner = THIS_MODULE,
820 .open = pd_open,
821 .release = pd_release,
822 .ioctl = pd_ioctl,
823 .getgeo = pd_getgeo,
824 .media_changed = pd_check_media,
825 .revalidate_disk= pd_revalidate
826 };
827
828 /* probing */
829
830 static void pd_probe_drive(struct pd_unit *disk)
831 {
832 struct gendisk *p = alloc_disk(1 << PD_BITS);
833 if (!p)
834 return;
835 strcpy(p->disk_name, disk->name);
836 p->fops = &pd_fops;
837 p->major = major;
838 p->first_minor = (disk - pd) << PD_BITS;
839 disk->gd = p;
840 p->private_data = disk;
841 p->queue = pd_queue;
842
843 if (disk->drive == -1) {
844 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
845 if (pd_special_command(disk, pd_identify) == 0)
846 return;
847 } else if (pd_special_command(disk, pd_identify) == 0)
848 return;
849 disk->gd = NULL;
850 put_disk(p);
851 }
852
853 static int pd_detect(void)
854 {
855 int found = 0, unit, pd_drive_count = 0;
856 struct pd_unit *disk;
857
858 for (unit = 0; unit < PD_UNITS; unit++) {
859 int *parm = *drives[unit];
860 struct pd_unit *disk = pd + unit;
861 disk->pi = &disk->pia;
862 disk->access = 0;
863 disk->changed = 1;
864 disk->capacity = 0;
865 disk->drive = parm[D_SLV];
866 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
867 disk->alt_geom = parm[D_GEO];
868 disk->standby = parm[D_SBY];
869 if (parm[D_PRT])
870 pd_drive_count++;
871 }
872
873 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
874 disk = pd;
875 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
876 PI_PD, verbose, disk->name)) {
877 pd_probe_drive(disk);
878 if (!disk->gd)
879 pi_release(disk->pi);
880 }
881
882 } else {
883 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
884 int *parm = *drives[unit];
885 if (!parm[D_PRT])
886 continue;
887 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
888 parm[D_UNI], parm[D_PRO], parm[D_DLY],
889 pd_scratch, PI_PD, verbose, disk->name)) {
890 pd_probe_drive(disk);
891 if (!disk->gd)
892 pi_release(disk->pi);
893 }
894 }
895 }
896 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
897 if (disk->gd) {
898 set_capacity(disk->gd, disk->capacity);
899 add_disk(disk->gd);
900 found = 1;
901 }
902 }
903 if (!found)
904 printk("%s: no valid drive found\n", name);
905 return found;
906 }
907
908 static int __init pd_init(void)
909 {
910 if (disable)
911 goto out1;
912
913 pd_queue = blk_init_queue(do_pd_request, &pd_lock);
914 if (!pd_queue)
915 goto out1;
916
917 blk_queue_max_hw_sectors(pd_queue, cluster);
918
919 if (register_blkdev(major, name))
920 goto out2;
921
922 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
923 name, name, PD_VERSION, major, cluster, nice);
924 if (!pd_detect())
925 goto out3;
926
927 return 0;
928
929 out3:
930 unregister_blkdev(major, name);
931 out2:
932 blk_cleanup_queue(pd_queue);
933 out1:
934 return -ENODEV;
935 }
936
937 static void __exit pd_exit(void)
938 {
939 struct pd_unit *disk;
940 int unit;
941 unregister_blkdev(major, name);
942 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
943 struct gendisk *p = disk->gd;
944 if (p) {
945 disk->gd = NULL;
946 del_gendisk(p);
947 put_disk(p);
948 pi_release(disk->pi);
949 }
950 }
951 blk_cleanup_queue(pd_queue);
952 }
953
954 MODULE_LICENSE("GPL");
955 module_init(pd_init)
956 module_exit(pd_exit)