drivers/gpu/drm/vc4/vc4_plane.c

   1 /*
   2  * Copyright (C) 2015 Broadcom
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /**
  10  * DOC: VC4 plane module
  11  *
  12  * Each DRM plane is a layer of pixels being scanned out by the HVS.
  13  *
  14  * At atomic modeset check time, we compute the HVS display element
  15  * state that would be necessary for displaying the plane (giving us a
  16  * chance to figure out if a plane configuration is invalid), then at
  17  * atomic flush time the CRTC will ask us to write our element state
  18  * into the region of the HVS that it has allocated for us.
  19  */
  20
  21 #include "vc4_drv.h"
  22 #include "vc4_regs.h"
  23 #include "drm_atomic.h"
  24 #include "drm_atomic_helper.h"
  25 #include "drm_fb_cma_helper.h"
  26 #include "drm_plane_helper.h"
  27
  28 enum vc4_scaling_mode {
  29         VC4_SCALING_NONE,
  30         VC4_SCALING_TPZ,
  31         VC4_SCALING_PPF,
  32 };
  33
  34 struct vc4_plane_state {
  35         struct drm_plane_state base;
  36         /* System memory copy of the display list for this element, computed
  37          * at atomic_check time.
  38          */
  39         u32 *dlist;
  40         u32 dlist_size; /* Number of dwords allocated for the display list */
  41         u32 dlist_count; /* Number of used dwords in the display list. */
  42
  43         /* Offset in the dlist to various words, for pageflip or
  44          * cursor updates.
  45          */
  46         u32 pos0_offset;
  47         u32 pos2_offset;
  48         u32 ptr0_offset;
  49
  50         /* Offset where the plane's dlist was last stored in the
  51          * hardware at vc4_crtc_atomic_flush() time.
  52          */
  53         u32 __iomem *hw_dlist;
  54
  55         /* Clipped coordinates of the plane on the display. */
  56         int crtc_x, crtc_y, crtc_w, crtc_h;
  57         /* Clipped area being scanned from in the FB. */
  58         u32 src_x, src_y;
  59
  60         u32 src_w[2], src_h[2];
  61
  62         /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
  63         enum vc4_scaling_mode x_scaling[2], y_scaling[2];
  64         bool is_unity;
  65         bool is_yuv;
  66
  67         /* Offset to start scanning out from the start of the plane's
  68          * BO.
  69          */
  70         u32 offsets[3];
  71
  72         /* Our allocation in LBM for temporary storage during scaling. */
  73         struct drm_mm_node lbm;
  74 };
  75
  76 static inline struct vc4_plane_state *
  77 to_vc4_plane_state(struct drm_plane_state *state)
  78 {
  79         return (struct vc4_plane_state *)state;
  80 }
  81
  82 static const struct hvs_format {
  83         u32 drm; /* DRM_FORMAT_* */
  84         u32 hvs; /* HVS_FORMAT_* */
  85         u32 pixel_order;
  86         bool has_alpha;
  87         bool flip_cbcr;
  88 } hvs_formats[] = {
  89         {
  90                 .drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  91                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
  92         },
  93         {
  94                 .drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  95                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
  96         },
  97         {
  98                 .drm = DRM_FORMAT_ABGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  99                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = true,
 100         },
 101         {
 102                 .drm = DRM_FORMAT_XBGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
 103                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = false,
 104         },
 105         {
 106                 .drm = DRM_FORMAT_RGB565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 107                 .pixel_order = HVS_PIXEL_ORDER_XRGB, .has_alpha = false,
 108         },
 109         {
 110                 .drm = DRM_FORMAT_BGR565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 111                 .pixel_order = HVS_PIXEL_ORDER_XBGR, .has_alpha = false,
 112         },
 113         {
 114                 .drm = DRM_FORMAT_ARGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 115                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
 116         },
 117         {
 118                 .drm = DRM_FORMAT_XRGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 119                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
 120         },
 121         {
 122                 .drm = DRM_FORMAT_YUV422,
 123                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 124         },
 125         {
 126                 .drm = DRM_FORMAT_YVU422,
 127                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 128                 .flip_cbcr = true,
 129         },
 130         {
 131                 .drm = DRM_FORMAT_YUV420,
 132                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 133         },
 134         {
 135                 .drm = DRM_FORMAT_YVU420,
 136                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 137                 .flip_cbcr = true,
 138         },
 139         {
 140                 .drm = DRM_FORMAT_NV12,
 141                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE,
 142         },
 143         {
 144                 .drm = DRM_FORMAT_NV16,
 145                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE,
 146         },
 147 };
 148
 149 static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
 150 {
 151         unsigned i;
 152
 153         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 154                 if (hvs_formats[i].drm == drm_format)
 155                         return &hvs_formats[i];
 156         }
 157
 158         return NULL;
 159 }
 160
 161 static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
 162 {
 163         if (dst > src)
 164                 return VC4_SCALING_PPF;
 165         else if (dst < src)
 166                 return VC4_SCALING_TPZ;
 167         else
 168                 return VC4_SCALING_NONE;
 169 }
 170
 171 static bool plane_enabled(struct drm_plane_state *state)
 172 {
 173         return state->fb && state->crtc;
 174 }
 175
 176 static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
 177 {
 178         struct vc4_plane_state *vc4_state;
 179
 180         if (WARN_ON(!plane->state))
 181                 return NULL;
 182
 183         vc4_state = kmemdup(plane->state, sizeof(*vc4_state), GFP_KERNEL);
 184         if (!vc4_state)
 185                 return NULL;
 186
 187         memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
 188
 189         __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
 190
 191         if (vc4_state->dlist) {
 192                 vc4_state->dlist = kmemdup(vc4_state->dlist,
 193                                            vc4_state->dlist_count * 4,
 194                                            GFP_KERNEL);
 195                 if (!vc4_state->dlist) {
 196                         kfree(vc4_state);
 197                         return NULL;
 198                 }
 199                 vc4_state->dlist_size = vc4_state->dlist_count;
 200         }
 201
 202         return &vc4_state->base;
 203 }
 204
 205 static void vc4_plane_destroy_state(struct drm_plane *plane,
 206                                     struct drm_plane_state *state)
 207 {
 208         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 209         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 210
 211         if (vc4_state->lbm.allocated) {
 212                 unsigned long irqflags;
 213
 214                 spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 215                 drm_mm_remove_node(&vc4_state->lbm);
 216                 spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 217         }
 218
 219         kfree(vc4_state->dlist);
 220         __drm_atomic_helper_plane_destroy_state(&vc4_state->base);
 221         kfree(state);
 222 }
 223
 224 /* Called during init to allocate the plane's atomic state. */
 225 static void vc4_plane_reset(struct drm_plane *plane)
 226 {
 227         struct vc4_plane_state *vc4_state;
 228
 229         WARN_ON(plane->state);
 230
 231         vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
 232         if (!vc4_state)
 233                 return;
 234
 235         plane->state = &vc4_state->base;
 236         vc4_state->base.plane = plane;
 237 }
 238
 239 static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
 240 {
 241         if (vc4_state->dlist_count == vc4_state->dlist_size) {
 242                 u32 new_size = max(4u, vc4_state->dlist_count * 2);
 243                 u32 *new_dlist = kmalloc(new_size * 4, GFP_KERNEL);
 244
 245                 if (!new_dlist)
 246                         return;
 247                 memcpy(new_dlist, vc4_state->dlist, vc4_state->dlist_count * 4);
 248
 249                 kfree(vc4_state->dlist);
 250                 vc4_state->dlist = new_dlist;
 251                 vc4_state->dlist_size = new_size;
 252         }
 253
 254         vc4_state->dlist[vc4_state->dlist_count++] = val;
 255 }
 256
 257 /* Returns the scl0/scl1 field based on whether the dimensions need to
 258  * be up/down/non-scaled.
 259  *
 260  * This is a replication of a table from the spec.
 261  */
 262 static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
 263 {
 264         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 265
 266         switch (vc4_state->x_scaling[plane] << 2 | vc4_state->y_scaling[plane]) {
 267         case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
 268                 return SCALER_CTL0_SCL_H_PPF_V_PPF;
 269         case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
 270                 return SCALER_CTL0_SCL_H_TPZ_V_PPF;
 271         case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
 272                 return SCALER_CTL0_SCL_H_PPF_V_TPZ;
 273         case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
 274                 return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
 275         case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
 276                 return SCALER_CTL0_SCL_H_PPF_V_NONE;
 277         case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
 278                 return SCALER_CTL0_SCL_H_NONE_V_PPF;
 279         case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
 280                 return SCALER_CTL0_SCL_H_NONE_V_TPZ;
 281         case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
 282                 return SCALER_CTL0_SCL_H_TPZ_V_NONE;
 283         default:
 284         case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
 285                 /* The unity case is independently handled by
 286                  * SCALER_CTL0_UNITY.
 287                  */
 288                 return 0;
 289         }
 290 }
 291
 292 static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 293 {
 294         struct drm_plane *plane = state->plane;
 295         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 296         struct drm_framebuffer *fb = state->fb;
 297         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 298         u32 subpixel_src_mask = (1 << 16) - 1;
 299         u32 format = fb->format->format;
 300         int num_planes = fb->format->num_planes;
 301         u32 h_subsample = 1;
 302         u32 v_subsample = 1;
 303         int i;
 304
 305         for (i = 0; i < num_planes; i++)
 306                 vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
 307
 308         /* We don't support subpixel source positioning for scaling. */
 309         if ((state->src_x & subpixel_src_mask) ||
 310             (state->src_y & subpixel_src_mask) ||
 311             (state->src_w & subpixel_src_mask) ||
 312             (state->src_h & subpixel_src_mask)) {
 313                 return -EINVAL;
 314         }
 315
 316         vc4_state->src_x = state->src_x >> 16;
 317         vc4_state->src_y = state->src_y >> 16;
 318         vc4_state->src_w[0] = state->src_w >> 16;
 319         vc4_state->src_h[0] = state->src_h >> 16;
 320
 321         vc4_state->crtc_x = state->crtc_x;
 322         vc4_state->crtc_y = state->crtc_y;
 323         vc4_state->crtc_w = state->crtc_w;
 324         vc4_state->crtc_h = state->crtc_h;
 325
 326         vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
 327                                                        vc4_state->crtc_w);
 328         vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
 329                                                        vc4_state->crtc_h);
 330
 331         if (num_planes > 1) {
 332                 vc4_state->is_yuv = true;
 333
 334                 h_subsample = drm_format_horz_chroma_subsampling(format);
 335                 v_subsample = drm_format_vert_chroma_subsampling(format);
 336                 vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
 337                 vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
 338
 339                 vc4_state->x_scaling[1] =
 340                         vc4_get_scaling_mode(vc4_state->src_w[1],
 341                                              vc4_state->crtc_w);
 342                 vc4_state->y_scaling[1] =
 343                         vc4_get_scaling_mode(vc4_state->src_h[1],
 344                                              vc4_state->crtc_h);
 345
 346                 /* YUV conversion requires that scaling be enabled,
 347                  * even on a plane that's otherwise 1:1.  Choose TPZ
 348                  * for simplicity.
 349                  */
 350                 if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
 351                         vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
 352                 if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
 353                         vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
 354         }
 355
 356         vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
 357                                vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
 358                                vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
 359                                vc4_state->y_scaling[1] == VC4_SCALING_NONE);
 360
 361         /* No configuring scaling on the cursor plane, since it gets
 362            non-vblank-synced updates, and scaling requires requires
 363            LBM changes which have to be vblank-synced.
 364          */
 365         if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
 366                 return -EINVAL;
 367
 368         /* Clamp the on-screen start x/y to 0.  The hardware doesn't
 369          * support negative y, and negative x wastes bandwidth.
 370          */
 371         if (vc4_state->crtc_x < 0) {
 372                 for (i = 0; i < num_planes; i++) {
 373                         u32 cpp = fb->format->cpp[i];
 374                         u32 subs = ((i == 0) ? 1 : h_subsample);
 375
 376                         vc4_state->offsets[i] += (cpp *
 377                                                   (-vc4_state->crtc_x) / subs);
 378                 }
 379                 vc4_state->src_w[0] += vc4_state->crtc_x;
 380                 vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
 381                 vc4_state->crtc_x = 0;
 382         }
 383
 384         if (vc4_state->crtc_y < 0) {
 385                 for (i = 0; i < num_planes; i++) {
 386                         u32 subs = ((i == 0) ? 1 : v_subsample);
 387
 388                         vc4_state->offsets[i] += (fb->pitches[i] *
 389                                                   (-vc4_state->crtc_y) / subs);
 390                 }
 391                 vc4_state->src_h[0] += vc4_state->crtc_y;
 392                 vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
 393                 vc4_state->crtc_y = 0;
 394         }
 395
 396         return 0;
 397 }
 398
 399 static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 400 {
 401         u32 scale, recip;
 402
 403         scale = (1 << 16) * src / dst;
 404
 405         /* The specs note that while the reciprocal would be defined
 406          * as (1<<32)/scale, ~0 is close enough.
 407          */
 408         recip = ~0 / scale;
 409
 410         vc4_dlist_write(vc4_state,
 411                         VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
 412                         VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
 413         vc4_dlist_write(vc4_state,
 414                         VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
 415 }
 416
 417 static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 418 {
 419         u32 scale = (1 << 16) * src / dst;
 420
 421         vc4_dlist_write(vc4_state,
 422                         SCALER_PPF_AGC |
 423                         VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
 424                         VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
 425 }
 426
 427 static u32 vc4_lbm_size(struct drm_plane_state *state)
 428 {
 429         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 430         /* This is the worst case number.  One of the two sizes will
 431          * be used depending on the scaling configuration.
 432          */
 433         u32 pix_per_line = max(vc4_state->src_w[0], (u32)vc4_state->crtc_w);
 434         u32 lbm;
 435
 436         if (!vc4_state->is_yuv) {
 437                 if (vc4_state->is_unity)
 438                         return 0;
 439                 else if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
 440                         lbm = pix_per_line * 8;
 441                 else {
 442                         /* In special cases, this multiplier might be 12. */
 443                         lbm = pix_per_line * 16;
 444                 }
 445         } else {
 446                 /* There are cases for this going down to a multiplier
 447                  * of 2, but according to the firmware source, the
 448                  * table in the docs is somewhat wrong.
 449                  */
 450                 lbm = pix_per_line * 16;
 451         }
 452
 453         lbm = roundup(lbm, 32);
 454
 455         return lbm;
 456 }
 457
 458 static void vc4_write_scaling_parameters(struct drm_plane_state *state,
 459                                          int channel)
 460 {
 461         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 462
 463         /* Ch0 H-PPF Word 0: Scaling Parameters */
 464         if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) {
 465                 vc4_write_ppf(vc4_state,
 466                               vc4_state->src_w[channel], vc4_state->crtc_w);
 467         }
 468
 469         /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
 470         if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) {
 471                 vc4_write_ppf(vc4_state,
 472                               vc4_state->src_h[channel], vc4_state->crtc_h);
 473                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 474         }
 475
 476         /* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
 477         if (vc4_state->x_scaling[channel] == VC4_SCALING_TPZ) {
 478                 vc4_write_tpz(vc4_state,
 479                               vc4_state->src_w[channel], vc4_state->crtc_w);
 480         }
 481
 482         /* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
 483         if (vc4_state->y_scaling[channel] == VC4_SCALING_TPZ) {
 484                 vc4_write_tpz(vc4_state,
 485                               vc4_state->src_h[channel], vc4_state->crtc_h);
 486                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 487         }
 488 }
 489
 490 /* Writes out a full display list for an active plane to the plane's
 491  * private dlist state.
 492  */
 493 static int vc4_plane_mode_set(struct drm_plane *plane,
 494                               struct drm_plane_state *state)
 495 {
 496         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 497         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 498         struct drm_framebuffer *fb = state->fb;
 499         u32 ctl0_offset = vc4_state->dlist_count;
 500         const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
 501         int num_planes = drm_format_num_planes(format->drm);
 502         u32 scl0, scl1;
 503         u32 lbm_size;
 504         unsigned long irqflags;
 505         int ret, i;
 506
 507         ret = vc4_plane_setup_clipping_and_scaling(state);
 508         if (ret)
 509                 return ret;
 510
 511         /* Allocate the LBM memory that the HVS will use for temporary
 512          * storage due to our scaling/format conversion.
 513          */
 514         lbm_size = vc4_lbm_size(state);
 515         if (lbm_size) {
 516                 if (!vc4_state->lbm.allocated) {
 517                         spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 518                         ret = drm_mm_insert_node_generic(&vc4->hvs->lbm_mm,
 519                                                          &vc4_state->lbm,
 520                                                          lbm_size, 32, 0, 0);
 521                         spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 522                 } else {
 523                         WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
 524                 }
 525         }
 526
 527         if (ret)
 528                 return ret;
 529
 530         /* SCL1 is used for Cb/Cr scaling of planar formats.  For RGB
 531          * and 4:4:4, scl1 should be set to scl0 so both channels of
 532          * the scaler do the same thing.  For YUV, the Y plane needs
 533          * to be put in channel 1 and Cb/Cr in channel 0, so we swap
 534          * the scl fields here.
 535          */
 536         if (num_planes == 1) {
 537                 scl0 = vc4_get_scl_field(state, 1);
 538                 scl1 = scl0;
 539         } else {
 540                 scl0 = vc4_get_scl_field(state, 1);
 541                 scl1 = vc4_get_scl_field(state, 0);
 542         }
 543
 544         /* Control word */
 545         vc4_dlist_write(vc4_state,
 546                         SCALER_CTL0_VALID |
 547                         (format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
 548                         (format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
 549                         (vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
 550                         VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
 551                         VC4_SET_FIELD(scl1, SCALER_CTL0_SCL1));
 552
 553         /* Position Word 0: Image Positions and Alpha Value */
 554         vc4_state->pos0_offset = vc4_state->dlist_count;
 555         vc4_dlist_write(vc4_state,
 556                         VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
 557                         VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
 558                         VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
 559
 560         /* Position Word 1: Scaled Image Dimensions. */
 561         if (!vc4_state->is_unity) {
 562                 vc4_dlist_write(vc4_state,
 563                                 VC4_SET_FIELD(vc4_state->crtc_w,
 564                                               SCALER_POS1_SCL_WIDTH) |
 565                                 VC4_SET_FIELD(vc4_state->crtc_h,
 566                                               SCALER_POS1_SCL_HEIGHT));
 567         }
 568
 569         /* Position Word 2: Source Image Size, Alpha Mode */
 570         vc4_state->pos2_offset = vc4_state->dlist_count;
 571         vc4_dlist_write(vc4_state,
 572                         VC4_SET_FIELD(format->has_alpha ?
 573                                       SCALER_POS2_ALPHA_MODE_PIPELINE :
 574                                       SCALER_POS2_ALPHA_MODE_FIXED,
 575                                       SCALER_POS2_ALPHA_MODE) |
 576                         VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
 577                         VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
 578
 579         /* Position Word 3: Context.  Written by the HVS. */
 580         vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 581
 582
 583         /* Pointer Word 0/1/2: RGB / Y / Cb / Cr Pointers
 584          *
 585          * The pointers may be any byte address.
 586          */
 587         vc4_state->ptr0_offset = vc4_state->dlist_count;
 588         if (!format->flip_cbcr) {
 589                 for (i = 0; i < num_planes; i++)
 590                         vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
 591         } else {
 592                 WARN_ON_ONCE(num_planes != 3);
 593                 vc4_dlist_write(vc4_state, vc4_state->offsets[0]);
 594                 vc4_dlist_write(vc4_state, vc4_state->offsets[2]);
 595                 vc4_dlist_write(vc4_state, vc4_state->offsets[1]);
 596         }
 597
 598         /* Pointer Context Word 0/1/2: Written by the HVS */
 599         for (i = 0; i < num_planes; i++)
 600                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 601
 602         /* Pitch word 0/1/2 */
 603         for (i = 0; i < num_planes; i++) {
 604                 vc4_dlist_write(vc4_state,
 605                                 VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH));
 606         }
 607
 608         /* Colorspace conversion words */
 609         if (vc4_state->is_yuv) {
 610                 vc4_dlist_write(vc4_state, SCALER_CSC0_ITR_R_601_5);
 611                 vc4_dlist_write(vc4_state, SCALER_CSC1_ITR_R_601_5);
 612                 vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
 613         }
 614
 615         if (!vc4_state->is_unity) {
 616                 /* LBM Base Address. */
 617                 if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
 618                     vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
 619                         vc4_dlist_write(vc4_state, vc4_state->lbm.start);
 620                 }
 621
 622                 if (num_planes > 1) {
 623                         /* Emit Cb/Cr as channel 0 and Y as channel
 624                          * 1. This matches how we set up scl0/scl1
 625                          * above.
 626                          */
 627                         vc4_write_scaling_parameters(state, 1);
 628                 }
 629                 vc4_write_scaling_parameters(state, 0);
 630
 631                 /* If any PPF setup was done, then all the kernel
 632                  * pointers get uploaded.
 633                  */
 634                 if (vc4_state->x_scaling[0] == VC4_SCALING_PPF ||
 635                     vc4_state->y_scaling[0] == VC4_SCALING_PPF ||
 636                     vc4_state->x_scaling[1] == VC4_SCALING_PPF ||
 637                     vc4_state->y_scaling[1] == VC4_SCALING_PPF) {
 638                         u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
 639                                                    SCALER_PPF_KERNEL_OFFSET);
 640
 641                         /* HPPF plane 0 */
 642                         vc4_dlist_write(vc4_state, kernel);
 643                         /* VPPF plane 0 */
 644                         vc4_dlist_write(vc4_state, kernel);
 645                         /* HPPF plane 1 */
 646                         vc4_dlist_write(vc4_state, kernel);
 647                         /* VPPF plane 1 */
 648                         vc4_dlist_write(vc4_state, kernel);
 649                 }
 650         }
 651
 652         vc4_state->dlist[ctl0_offset] |=
 653                 VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
 654
 655         return 0;
 656 }
 657
 658 /* If a modeset involves changing the setup of a plane, the atomic
 659  * infrastructure will call this to validate a proposed plane setup.
 660  * However, if a plane isn't getting updated, this (and the
 661  * corresponding vc4_plane_atomic_update) won't get called.  Thus, we
 662  * compute the dlist here and have all active plane dlists get updated
 663  * in the CRTC's flush.
 664  */
 665 static int vc4_plane_atomic_check(struct drm_plane *plane,
 666                                   struct drm_plane_state *state)
 667 {
 668         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 669
 670         vc4_state->dlist_count = 0;
 671
 672         if (plane_enabled(state))
 673                 return vc4_plane_mode_set(plane, state);
 674         else
 675                 return 0;
 676 }
 677
 678 static void vc4_plane_atomic_update(struct drm_plane *plane,
 679                                     struct drm_plane_state *old_state)
 680 {
 681         /* No contents here.  Since we don't know where in the CRTC's
 682          * dlist we should be stored, our dlist is uploaded to the
 683          * hardware with vc4_plane_write_dlist() at CRTC atomic_flush
 684          * time.
 685          */
 686 }
 687
 688 u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
 689 {
 690         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 691         int i;
 692
 693         vc4_state->hw_dlist = dlist;
 694
 695         /* Can't memcpy_toio() because it needs to be 32-bit writes. */
 696         for (i = 0; i < vc4_state->dlist_count; i++)
 697                 writel(vc4_state->dlist[i], &dlist[i]);
 698
 699         return vc4_state->dlist_count;
 700 }
 701
 702 u32 vc4_plane_dlist_size(const struct drm_plane_state *state)
 703 {
 704         const struct vc4_plane_state *vc4_state =
 705                 container_of(state, typeof(*vc4_state), base);
 706
 707         return vc4_state->dlist_count;
 708 }
 709
 710 /* Updates the plane to immediately (well, once the FIFO needs
 711  * refilling) scan out from at a new framebuffer.
 712  */
 713 void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 714 {
 715         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 716         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 717         uint32_t addr;
 718
 719         /* We're skipping the address adjustment for negative origin,
 720          * because this is only called on the primary plane.
 721          */
 722         WARN_ON_ONCE(plane->state->crtc_x < 0 || plane->state->crtc_y < 0);
 723         addr = bo->paddr + fb->offsets[0];
 724
 725         /* Write the new address into the hardware immediately.  The
 726          * scanout will start from this address as soon as the FIFO
 727          * needs to refill with pixels.
 728          */
 729         writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 730
 731         /* Also update the CPU-side dlist copy, so that any later
 732          * atomic updates that don't do a new modeset on our plane
 733          * also use our updated address.
 734          */
 735         vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 736 }
 737
 738 static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
 739         .atomic_check = vc4_plane_atomic_check,
 740         .atomic_update = vc4_plane_atomic_update,
 741 };
 742
 743 static void vc4_plane_destroy(struct drm_plane *plane)
 744 {
 745         drm_plane_helper_disable(plane);
 746         drm_plane_cleanup(plane);
 747 }
 748
 749 /* Implements immediate (non-vblank-synced) updates of the cursor
 750  * position, or falls back to the atomic helper otherwise.
 751  */
 752 static int
 753 vc4_update_plane(struct drm_plane *plane,
 754                  struct drm_crtc *crtc,
 755                  struct drm_framebuffer *fb,
 756                  int crtc_x, int crtc_y,
 757                  unsigned int crtc_w, unsigned int crtc_h,
 758                  uint32_t src_x, uint32_t src_y,
 759                  uint32_t src_w, uint32_t src_h)
 760 {
 761         struct drm_plane_state *plane_state;
 762         struct vc4_plane_state *vc4_state;
 763
 764         if (plane != crtc->cursor)
 765                 goto out;
 766
 767         plane_state = plane->state;
 768         vc4_state = to_vc4_plane_state(plane_state);
 769
 770         if (!plane_state)
 771                 goto out;
 772
 773         /* No configuring new scaling in the fast path. */
 774         if (crtc_w != plane_state->crtc_w ||
 775             crtc_h != plane_state->crtc_h ||
 776             src_w != plane_state->src_w ||
 777             src_h != plane_state->src_h) {
 778                 goto out;
 779         }
 780
 781         if (fb != plane_state->fb) {
 782                 drm_atomic_set_fb_for_plane(plane->state, fb);
 783                 vc4_plane_async_set_fb(plane, fb);
 784         }
 785
 786         /* Set the cursor's position on the screen.  This is the
 787          * expected change from the drm_mode_cursor_universal()
 788          * helper.
 789          */
 790         plane_state->crtc_x = crtc_x;
 791         plane_state->crtc_y = crtc_y;
 792
 793         /* Allow changing the start position within the cursor BO, if
 794          * that matters.
 795          */
 796         plane_state->src_x = src_x;
 797         plane_state->src_y = src_y;
 798
 799         /* Update the display list based on the new crtc_x/y. */
 800         vc4_plane_atomic_check(plane, plane_state);
 801
 802         /* Note that we can't just call vc4_plane_write_dlist()
 803          * because that would smash the context data that the HVS is
 804          * currently using.
 805          */
 806         writel(vc4_state->dlist[vc4_state->pos0_offset],
 807                &vc4_state->hw_dlist[vc4_state->pos0_offset]);
 808         writel(vc4_state->dlist[vc4_state->pos2_offset],
 809                &vc4_state->hw_dlist[vc4_state->pos2_offset]);
 810         writel(vc4_state->dlist[vc4_state->ptr0_offset],
 811                &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 812
 813         return 0;
 814
 815 out:
 816         return drm_atomic_helper_update_plane(plane, crtc, fb,
 817                                               crtc_x, crtc_y,
 818                                               crtc_w, crtc_h,
 819                                               src_x, src_y,
 820                                               src_w, src_h);
 821 }
 822
 823 static const struct drm_plane_funcs vc4_plane_funcs = {
 824         .update_plane = vc4_update_plane,
 825         .disable_plane = drm_atomic_helper_disable_plane,
 826         .destroy = vc4_plane_destroy,
 827         .set_property = NULL,
 828         .reset = vc4_plane_reset,
 829         .atomic_duplicate_state = vc4_plane_duplicate_state,
 830         .atomic_destroy_state = vc4_plane_destroy_state,
 831 };
 832
 833 struct drm_plane *vc4_plane_init(struct drm_device *dev,
 834                                  enum drm_plane_type type)
 835 {
 836         struct drm_plane *plane = NULL;
 837         struct vc4_plane *vc4_plane;
 838         u32 formats[ARRAY_SIZE(hvs_formats)];
 839         u32 num_formats = 0;
 840         int ret = 0;
 841         unsigned i;
 842
 843         vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane),
 844                                  GFP_KERNEL);
 845         if (!vc4_plane)
 846                 return ERR_PTR(-ENOMEM);
 847
 848         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 849                 /* Don't allow YUV in cursor planes, since that means
 850                  * tuning on the scaler, which we don't allow for the
 851                  * cursor.
 852                  */
 853                 if (type != DRM_PLANE_TYPE_CURSOR ||
 854                     hvs_formats[i].hvs < HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE) {
 855                         formats[num_formats++] = hvs_formats[i].drm;
 856                 }
 857         }
 858         plane = &vc4_plane->base;
 859         ret = drm_universal_plane_init(dev, plane, 0,
 860                                        &vc4_plane_funcs,
 861                                        formats, num_formats,
 862                                        type, NULL);
 863
 864         drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
 865
 866         return plane;
 867 }