2 * This file contains work-arounds for many known PCI hardware
3 * bugs. Devices present only on certain architectures (host
4 * bridges et cetera) should be handled in arch-specific code.
6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
10 * The bridge optimization stuff has been removed. If you really
11 * have a silly BIOS which is unable to set your host bridge right,
12 * use the PowerTweak utility (see http://powertweak.sourceforge.net).
15 #include <linux/config.h>
16 #include <linux/types.h>
17 #include <linux/kernel.h>
18 #include <linux/pci.h>
19 #include <linux/init.h>
20 #include <linux/delay.h>
22 /* Deal with broken BIOS'es that neglect to enable passive release,
23 which can cause problems in combination with the 82441FX/PPro MTRRs */
24 static void __devinit
quirk_passive_release(struct pci_dev
*dev
)
26 struct pci_dev
*d
= NULL
;
29 /* We have to make sure a particular bit is set in the PIIX3
30 ISA bridge, so we have to go out and find it. */
31 while ((d
= pci_get_device(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371SB_0
, d
))) {
32 pci_read_config_byte(d
, 0x82, &dlc
);
34 printk(KERN_ERR
"PCI: PIIX3: Enabling Passive Release on %s\n", pci_name(d
));
36 pci_write_config_byte(d
, 0x82, dlc
);
40 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82441
, quirk_passive_release
);
42 /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
43 but VIA don't answer queries. If you happen to have good contacts at VIA
44 ask them for me please -- Alan
46 This appears to be BIOS not version dependent. So presumably there is a
48 int isa_dma_bridge_buggy
; /* Exported */
50 static void __devinit
quirk_isa_dma_hangs(struct pci_dev
*dev
)
52 if (!isa_dma_bridge_buggy
) {
53 isa_dma_bridge_buggy
=1;
54 printk(KERN_INFO
"Activating ISA DMA hang workarounds.\n");
58 * Its not totally clear which chipsets are the problematic ones
59 * We know 82C586 and 82C596 variants are affected.
61 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C586_0
, quirk_isa_dma_hangs
);
62 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C596
, quirk_isa_dma_hangs
);
63 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371SB_0
, quirk_isa_dma_hangs
);
64 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL
, PCI_DEVICE_ID_AL_M1533
, quirk_isa_dma_hangs
);
65 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC
, PCI_DEVICE_ID_NEC_CBUS_1
, quirk_isa_dma_hangs
);
66 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC
, PCI_DEVICE_ID_NEC_CBUS_2
, quirk_isa_dma_hangs
);
67 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC
, PCI_DEVICE_ID_NEC_CBUS_3
, quirk_isa_dma_hangs
);
72 * Chipsets where PCI->PCI transfers vanish or hang
74 static void __devinit
quirk_nopcipci(struct pci_dev
*dev
)
76 if ((pci_pci_problems
& PCIPCI_FAIL
)==0) {
77 printk(KERN_INFO
"Disabling direct PCI/PCI transfers.\n");
78 pci_pci_problems
|= PCIPCI_FAIL
;
81 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_5597
, quirk_nopcipci
);
82 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_496
, quirk_nopcipci
);
85 * Triton requires workarounds to be used by the drivers
87 static void __devinit
quirk_triton(struct pci_dev
*dev
)
89 if ((pci_pci_problems
&PCIPCI_TRITON
)==0) {
90 printk(KERN_INFO
"Limiting direct PCI/PCI transfers.\n");
91 pci_pci_problems
|= PCIPCI_TRITON
;
94 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82437
, quirk_triton
);
95 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82437VX
, quirk_triton
);
96 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82439
, quirk_triton
);
97 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82439TX
, quirk_triton
);
100 * VIA Apollo KT133 needs PCI latency patch
101 * Made according to a windows driver based patch by George E. Breese
102 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
103 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
104 * the info on which Mr Breese based his work.
106 * Updated based on further information from the site and also on
107 * information provided by VIA
109 static void __devinit
quirk_vialatency(struct pci_dev
*dev
)
114 /* Ok we have a potential problem chipset here. Now see if we have
115 a buggy southbridge */
117 p
= pci_get_device(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C686
, NULL
);
119 pci_read_config_byte(p
, PCI_CLASS_REVISION
, &rev
);
120 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
121 /* Check for buggy part revisions */
122 if (rev
< 0x40 || rev
> 0x42)
125 p
= pci_get_device(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_8231
, NULL
);
126 if (p
==NULL
) /* No problem parts */
128 pci_read_config_byte(p
, PCI_CLASS_REVISION
, &rev
);
129 /* Check for buggy part revisions */
130 if (rev
< 0x10 || rev
> 0x12)
135 * Ok we have the problem. Now set the PCI master grant to
136 * occur every master grant. The apparent bug is that under high
137 * PCI load (quite common in Linux of course) you can get data
138 * loss when the CPU is held off the bus for 3 bus master requests
139 * This happens to include the IDE controllers....
141 * VIA only apply this fix when an SB Live! is present but under
142 * both Linux and Windows this isnt enough, and we have seen
143 * corruption without SB Live! but with things like 3 UDMA IDE
144 * controllers. So we ignore that bit of the VIA recommendation..
147 pci_read_config_byte(dev
, 0x76, &busarb
);
148 /* Set bit 4 and bi 5 of byte 76 to 0x01
149 "Master priority rotation on every PCI master grant */
152 pci_write_config_byte(dev
, 0x76, busarb
);
153 printk(KERN_INFO
"Applying VIA southbridge workaround.\n");
157 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_8363_0
, quirk_vialatency
);
158 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_8371_1
, quirk_vialatency
);
159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_8361
, quirk_vialatency
);
162 * VIA Apollo VP3 needs ETBF on BT848/878
164 static void __devinit
quirk_viaetbf(struct pci_dev
*dev
)
166 if ((pci_pci_problems
&PCIPCI_VIAETBF
)==0) {
167 printk(KERN_INFO
"Limiting direct PCI/PCI transfers.\n");
168 pci_pci_problems
|= PCIPCI_VIAETBF
;
171 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C597_0
, quirk_viaetbf
);
173 static void __devinit
quirk_vsfx(struct pci_dev
*dev
)
175 if ((pci_pci_problems
&PCIPCI_VSFX
)==0) {
176 printk(KERN_INFO
"Limiting direct PCI/PCI transfers.\n");
177 pci_pci_problems
|= PCIPCI_VSFX
;
180 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C576
, quirk_vsfx
);
183 * Ali Magik requires workarounds to be used by the drivers
184 * that DMA to AGP space. Latency must be set to 0xA and triton
185 * workaround applied too
186 * [Info kindly provided by ALi]
188 static void __init
quirk_alimagik(struct pci_dev
*dev
)
190 if ((pci_pci_problems
&PCIPCI_ALIMAGIK
)==0) {
191 printk(KERN_INFO
"Limiting direct PCI/PCI transfers.\n");
192 pci_pci_problems
|= PCIPCI_ALIMAGIK
|PCIPCI_TRITON
;
195 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL
, PCI_DEVICE_ID_AL_M1647
, quirk_alimagik
);
196 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL
, PCI_DEVICE_ID_AL_M1651
, quirk_alimagik
);
199 * Natoma has some interesting boundary conditions with Zoran stuff
202 static void __devinit
quirk_natoma(struct pci_dev
*dev
)
204 if ((pci_pci_problems
&PCIPCI_NATOMA
)==0) {
205 printk(KERN_INFO
"Limiting direct PCI/PCI transfers.\n");
206 pci_pci_problems
|= PCIPCI_NATOMA
;
209 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82441
, quirk_natoma
);
210 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443LX_0
, quirk_natoma
);
211 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443LX_1
, quirk_natoma
);
212 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443BX_0
, quirk_natoma
);
213 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443BX_1
, quirk_natoma
);
214 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443BX_2
, quirk_natoma
);
217 * This chip can cause PCI parity errors if config register 0xA0 is read
218 * while DMAs are occurring.
220 static void __devinit
quirk_citrine(struct pci_dev
*dev
)
222 dev
->cfg_size
= 0xA0;
224 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
, quirk_citrine
);
227 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
228 * If it's needed, re-allocate the region.
230 static void __devinit
quirk_s3_64M(struct pci_dev
*dev
)
232 struct resource
*r
= &dev
->resource
[0];
234 if ((r
->start
& 0x3ffffff) || r
->end
!= r
->start
+ 0x3ffffff) {
239 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3
, PCI_DEVICE_ID_S3_868
, quirk_s3_64M
);
240 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3
, PCI_DEVICE_ID_S3_968
, quirk_s3_64M
);
242 static void __devinit
quirk_io_region(struct pci_dev
*dev
, unsigned region
, unsigned size
, int nr
)
246 struct resource
*res
= dev
->resource
+ nr
;
248 res
->name
= pci_name(dev
);
250 res
->end
= region
+ size
- 1;
251 res
->flags
= IORESOURCE_IO
;
252 pci_claim_resource(dev
, nr
);
257 * ATI Northbridge setups MCE the processor if you even
258 * read somewhere between 0x3b0->0x3bb or read 0x3d3
260 static void __devinit
quirk_ati_exploding_mce(struct pci_dev
*dev
)
262 printk(KERN_INFO
"ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.\n");
263 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
264 request_region(0x3b0, 0x0C, "RadeonIGP");
265 request_region(0x3d3, 0x01, "RadeonIGP");
267 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI
, PCI_DEVICE_ID_ATI_RS100
, quirk_ati_exploding_mce
);
270 * Let's make the southbridge information explicit instead
271 * of having to worry about people probing the ACPI areas,
272 * for example.. (Yes, it happens, and if you read the wrong
273 * ACPI register it will put the machine to sleep with no
274 * way of waking it up again. Bummer).
276 * ALI M7101: Two IO regions pointed to by words at
277 * 0xE0 (64 bytes of ACPI registers)
278 * 0xE2 (32 bytes of SMB registers)
280 static void __devinit
quirk_ali7101_acpi(struct pci_dev
*dev
)
284 pci_read_config_word(dev
, 0xE0, ®ion
);
285 quirk_io_region(dev
, region
, 64, PCI_BRIDGE_RESOURCES
);
286 pci_read_config_word(dev
, 0xE2, ®ion
);
287 quirk_io_region(dev
, region
, 32, PCI_BRIDGE_RESOURCES
+1);
289 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL
, PCI_DEVICE_ID_AL_M7101
, quirk_ali7101_acpi
);
292 * PIIX4 ACPI: Two IO regions pointed to by longwords at
293 * 0x40 (64 bytes of ACPI registers)
294 * 0x90 (32 bytes of SMB registers)
296 static void __devinit
quirk_piix4_acpi(struct pci_dev
*dev
)
300 pci_read_config_dword(dev
, 0x40, ®ion
);
301 quirk_io_region(dev
, region
, 64, PCI_BRIDGE_RESOURCES
);
302 pci_read_config_dword(dev
, 0x90, ®ion
);
303 quirk_io_region(dev
, region
, 32, PCI_BRIDGE_RESOURCES
+1);
305 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371AB_3
, quirk_piix4_acpi
);
308 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
309 * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
310 * 0x58 (64 bytes of GPIO I/O space)
312 static void __devinit
quirk_ich4_lpc_acpi(struct pci_dev
*dev
)
316 pci_read_config_dword(dev
, 0x40, ®ion
);
317 quirk_io_region(dev
, region
, 128, PCI_BRIDGE_RESOURCES
);
319 pci_read_config_dword(dev
, 0x58, ®ion
);
320 quirk_io_region(dev
, region
, 64, PCI_BRIDGE_RESOURCES
+1);
322 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801AA_0
, quirk_ich4_lpc_acpi
);
323 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801AB_0
, quirk_ich4_lpc_acpi
);
324 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801BA_0
, quirk_ich4_lpc_acpi
);
325 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801BA_10
, quirk_ich4_lpc_acpi
);
326 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801CA_0
, quirk_ich4_lpc_acpi
);
327 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801CA_12
, quirk_ich4_lpc_acpi
);
328 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801DB_0
, quirk_ich4_lpc_acpi
);
329 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801DB_12
, quirk_ich4_lpc_acpi
);
330 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801EB_0
, quirk_ich4_lpc_acpi
);
333 * VIA ACPI: One IO region pointed to by longword at
334 * 0x48 or 0x20 (256 bytes of ACPI registers)
336 static void __devinit
quirk_vt82c586_acpi(struct pci_dev
*dev
)
341 pci_read_config_byte(dev
, PCI_CLASS_REVISION
, &rev
);
343 pci_read_config_dword(dev
, 0x48, ®ion
);
344 region
&= PCI_BASE_ADDRESS_IO_MASK
;
345 quirk_io_region(dev
, region
, 256, PCI_BRIDGE_RESOURCES
);
348 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C586_3
, quirk_vt82c586_acpi
);
351 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
352 * 0x48 (256 bytes of ACPI registers)
353 * 0x70 (128 bytes of hardware monitoring register)
354 * 0x90 (16 bytes of SMB registers)
356 static void __devinit
quirk_vt82c686_acpi(struct pci_dev
*dev
)
361 quirk_vt82c586_acpi(dev
);
363 pci_read_config_word(dev
, 0x70, &hm
);
364 hm
&= PCI_BASE_ADDRESS_IO_MASK
;
365 quirk_io_region(dev
, hm
, 128, PCI_BRIDGE_RESOURCES
+ 1);
367 pci_read_config_dword(dev
, 0x90, &smb
);
368 smb
&= PCI_BASE_ADDRESS_IO_MASK
;
369 quirk_io_region(dev
, smb
, 16, PCI_BRIDGE_RESOURCES
+ 2);
371 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C686_4
, quirk_vt82c686_acpi
);
374 #ifdef CONFIG_X86_IO_APIC
376 #include <asm/io_apic.h>
379 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
380 * devices to the external APIC.
382 * TODO: When we have device-specific interrupt routers,
383 * this code will go away from quirks.
385 static void __devinit
quirk_via_ioapic(struct pci_dev
*dev
)
390 tmp
= 0; /* nothing routed to external APIC */
392 tmp
= 0x1f; /* all known bits (4-0) routed to external APIC */
394 printk(KERN_INFO
"PCI: %sbling Via external APIC routing\n",
395 tmp
== 0 ? "Disa" : "Ena");
397 /* Offset 0x58: External APIC IRQ output control */
398 pci_write_config_byte (dev
, 0x58, tmp
);
400 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C686
, quirk_via_ioapic
);
403 * The AMD io apic can hang the box when an apic irq is masked.
404 * We check all revs >= B0 (yet not in the pre production!) as the bug
405 * is currently marked NoFix
407 * We have multiple reports of hangs with this chipset that went away with
408 * noapic specified. For the moment we assume its the errata. We may be wrong
409 * of course. However the advice is demonstrably good even if so..
411 static void __devinit
quirk_amd_ioapic(struct pci_dev
*dev
)
415 pci_read_config_byte(dev
, PCI_REVISION_ID
, &rev
);
417 printk(KERN_WARNING
"I/O APIC: AMD Errata #22 may be present. In the event of instability try\n");
418 printk(KERN_WARNING
" : booting with the \"noapic\" option.\n");
421 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD
, PCI_DEVICE_ID_AMD_VIPER_7410
, quirk_amd_ioapic
);
423 static void __init
quirk_ioapic_rmw(struct pci_dev
*dev
)
425 if (dev
->devfn
== 0 && dev
->bus
->number
== 0)
428 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI
, PCI_ANY_ID
, quirk_ioapic_rmw
);
432 #define AMD8131_revA0 0x01
433 #define AMD8131_revB0 0x11
434 #define AMD8131_MISC 0x40
435 #define AMD8131_NIOAMODE_BIT 0
436 static void __init
quirk_amd_8131_ioapic(struct pci_dev
*dev
)
438 unsigned char revid
, tmp
;
441 printk(KERN_WARNING
"PCI: MSI quirk detected. pci_msi_quirk set.\n");
446 pci_read_config_byte(dev
, PCI_REVISION_ID
, &revid
);
447 if (revid
== AMD8131_revA0
|| revid
== AMD8131_revB0
) {
448 printk(KERN_INFO
"Fixing up AMD8131 IOAPIC mode\n");
449 pci_read_config_byte( dev
, AMD8131_MISC
, &tmp
);
450 tmp
&= ~(1 << AMD8131_NIOAMODE_BIT
);
451 pci_write_config_byte( dev
, AMD8131_MISC
, tmp
);
454 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD
, PCI_DEVICE_ID_AMD_8131_APIC
, quirk_amd_8131_ioapic
);
456 #endif /* CONFIG_X86_IO_APIC */
460 * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
461 * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
462 * when written, it makes an internal connection to the PIC.
463 * For these devices, this register is defined to be 4 bits wide.
464 * Normally this is fine. However for IO-APIC motherboards, or
465 * non-x86 architectures (yes Via exists on PPC among other places),
466 * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
467 * interrupts delivered properly.
469 * TODO: When we have device-specific interrupt routers,
470 * quirk_via_irqpic will go away from quirks.
474 * FIXME: it is questionable that quirk_via_acpi
475 * is needed. It shows up as an ISA bridge, and does not
476 * support the PCI_INTERRUPT_LINE register at all. Therefore
477 * it seems like setting the pci_dev's 'irq' to the
478 * value of the ACPI SCI interrupt is only done for convenience.
481 static void __devinit
quirk_via_acpi(struct pci_dev
*d
)
484 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42
487 pci_read_config_byte(d
, 0x42, &irq
);
489 if (irq
&& (irq
!= 2))
492 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C586_3
, quirk_via_acpi
);
493 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C686_4
, quirk_via_acpi
);
496 * PIIX3 USB: We have to disable USB interrupts that are
497 * hardwired to PIRQD# and may be shared with an
500 * Legacy Support Register (LEGSUP):
501 * bit13: USB PIRQ Enable (USBPIRQDEN),
502 * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
504 * We mask out all r/wc bits, too.
506 static void __devinit
quirk_piix3_usb(struct pci_dev
*dev
)
510 pci_read_config_word(dev
, 0xc0, &legsup
);
512 pci_write_config_word(dev
, 0xc0, legsup
);
514 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371SB_2
, quirk_piix3_usb
);
515 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371AB_2
, quirk_piix3_usb
);
518 * VIA VT82C598 has its device ID settable and many BIOSes
519 * set it to the ID of VT82C597 for backward compatibility.
520 * We need to switch it off to be able to recognize the real
523 static void __devinit
quirk_vt82c598_id(struct pci_dev
*dev
)
525 pci_write_config_byte(dev
, 0xfc, 0);
526 pci_read_config_word(dev
, PCI_DEVICE_ID
, &dev
->device
);
528 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C597_0
, quirk_vt82c598_id
);
531 * CardBus controllers have a legacy base address that enables them
532 * to respond as i82365 pcmcia controllers. We don't want them to
533 * do this even if the Linux CardBus driver is not loaded, because
534 * the Linux i82365 driver does not (and should not) handle CardBus.
536 static void __devinit
quirk_cardbus_legacy(struct pci_dev
*dev
)
538 if ((PCI_CLASS_BRIDGE_CARDBUS
<< 8) ^ dev
->class)
540 pci_write_config_dword(dev
, PCI_CB_LEGACY_MODE_BASE
, 0);
542 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID
, PCI_ANY_ID
, quirk_cardbus_legacy
);
545 * Following the PCI ordering rules is optional on the AMD762. I'm not
546 * sure what the designers were smoking but let's not inhale...
548 * To be fair to AMD, it follows the spec by default, its BIOS people
551 static void __devinit
quirk_amd_ordering(struct pci_dev
*dev
)
554 pci_read_config_dword(dev
, 0x4C, &pcic
);
557 printk(KERN_WARNING
"BIOS failed to enable PCI standards compliance, fixing this error.\n");
558 pci_write_config_dword(dev
, 0x4C, pcic
);
559 pci_read_config_dword(dev
, 0x84, &pcic
);
560 pcic
|= (1<<23); /* Required in this mode */
561 pci_write_config_dword(dev
, 0x84, pcic
);
564 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD
, PCI_DEVICE_ID_AMD_FE_GATE_700C
, quirk_amd_ordering
);
567 * DreamWorks provided workaround for Dunord I-3000 problem
569 * This card decodes and responds to addresses not apparently
570 * assigned to it. We force a larger allocation to ensure that
571 * nothing gets put too close to it.
573 static void __devinit
quirk_dunord ( struct pci_dev
* dev
)
575 struct resource
*r
= &dev
->resource
[1];
579 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD
, PCI_DEVICE_ID_DUNORD_I3000
, quirk_dunord
);
582 * i82380FB mobile docking controller: its PCI-to-PCI bridge
583 * is subtractive decoding (transparent), and does indicate this
584 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
587 static void __devinit
quirk_transparent_bridge(struct pci_dev
*dev
)
589 dev
->transparent
= 1;
591 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82380FB
, quirk_transparent_bridge
);
592 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA
, 0x605, quirk_transparent_bridge
);
595 * Common misconfiguration of the MediaGX/Geode PCI master that will
596 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
597 * datasheets found at http://www.national.com/ds/GX for info on what
598 * these bits do. <christer@weinigel.se>
600 static void __init
quirk_mediagx_master(struct pci_dev
*dev
)
603 pci_read_config_byte(dev
, 0x41, ®
);
606 printk(KERN_INFO
"PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg
);
607 pci_write_config_byte(dev
, 0x41, reg
);
610 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX
, PCI_DEVICE_ID_CYRIX_PCI_MASTER
, quirk_mediagx_master
);
613 * As per PCI spec, ignore base address registers 0-3 of the IDE controllers
614 * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
615 * secondary channels respectively). If the device reports Compatible mode
616 * but does use BAR0-3 for address decoding, we assume that firmware has
617 * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374).
618 * Exceptions (if they exist) must be handled in chip/architecture specific
621 * Note: for non x86 people. You may need an arch specific quirk to handle
622 * moving IDE devices to native mode as well. Some plug in card devices power
623 * up in compatible mode and assume the BIOS will adjust them.
625 * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as
626 * we do now ? We don't want is pci_enable_device to come along
627 * and assign new resources. Both approaches work for that.
629 static void __devinit
quirk_ide_bases(struct pci_dev
*dev
)
631 struct resource
*res
;
632 int first_bar
= 2, last_bar
= 0;
634 if ((dev
->class >> 8) != PCI_CLASS_STORAGE_IDE
)
637 res
= &dev
->resource
[0];
639 /* primary channel: ProgIf bit 0, BAR0, BAR1 */
640 if (!(dev
->class & 1) && (res
[0].flags
|| res
[1].flags
)) {
641 res
[0].start
= res
[0].end
= res
[0].flags
= 0;
642 res
[1].start
= res
[1].end
= res
[1].flags
= 0;
647 /* secondary channel: ProgIf bit 2, BAR2, BAR3 */
648 if (!(dev
->class & 4) && (res
[2].flags
|| res
[3].flags
)) {
649 res
[2].start
= res
[2].end
= res
[2].flags
= 0;
650 res
[3].start
= res
[3].end
= res
[3].flags
= 0;
657 printk(KERN_INFO
"PCI: Ignoring BAR%d-%d of IDE controller %s\n",
658 first_bar
, last_bar
, pci_name(dev
));
660 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID
, PCI_ANY_ID
, quirk_ide_bases
);
663 * Ensure C0 rev restreaming is off. This is normally done by
664 * the BIOS but in the odd case it is not the results are corruption
665 * hence the presence of a Linux check
667 static void __init
quirk_disable_pxb(struct pci_dev
*pdev
)
672 pci_read_config_byte(pdev
, PCI_REVISION_ID
, &rev
);
673 if (rev
!= 0x04) /* Only C0 requires this */
675 pci_read_config_word(pdev
, 0x40, &config
);
676 if (config
& (1<<6)) {
678 pci_write_config_word(pdev
, 0x40, config
);
679 printk(KERN_INFO
"PCI: C0 revision 450NX. Disabling PCI restreaming.\n");
682 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82454NX
, quirk_disable_pxb
);
685 * VIA northbridges care about PCI_INTERRUPT_LINE
687 int via_interrupt_line_quirk
;
689 static void __devinit
quirk_via_bridge(struct pci_dev
*pdev
)
691 if(pdev
->devfn
== 0) {
692 printk(KERN_INFO
"PCI: Via IRQ fixup\n");
693 via_interrupt_line_quirk
= 1;
696 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA
, PCI_ANY_ID
, quirk_via_bridge
);
699 * Serverworks CSB5 IDE does not fully support native mode
701 static void __devinit
quirk_svwks_csb5ide(struct pci_dev
*pdev
)
704 pci_read_config_byte(pdev
, PCI_CLASS_PROG
, &prog
);
708 pci_write_config_byte(pdev
, PCI_CLASS_PROG
, prog
);
709 /* need to re-assign BARs for compat mode */
710 quirk_ide_bases(pdev
);
713 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS
, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE
, quirk_svwks_csb5ide
);
716 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
718 static void __init
quirk_ide_samemode(struct pci_dev
*pdev
)
722 pci_read_config_byte(pdev
, PCI_CLASS_PROG
, &prog
);
724 if (((prog
& 1) && !(prog
& 4)) || ((prog
& 4) && !(prog
& 1))) {
725 printk(KERN_INFO
"PCI: IDE mode mismatch; forcing legacy mode\n");
728 pci_write_config_byte(pdev
, PCI_CLASS_PROG
, prog
);
729 /* need to re-assign BARs for compat mode */
730 quirk_ide_bases(pdev
);
733 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801CA_10
, quirk_ide_samemode
);
735 /* This was originally an Alpha specific thing, but it really fits here.
736 * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
738 static void __init
quirk_eisa_bridge(struct pci_dev
*dev
)
740 dev
->class = PCI_CLASS_BRIDGE_EISA
<< 8;
742 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82375
, quirk_eisa_bridge
);
745 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
746 * is not activated. The myth is that Asus said that they do not want the
747 * users to be irritated by just another PCI Device in the Win98 device
748 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
749 * package 2.7.0 for details)
751 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
752 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
753 * becomes necessary to do this tweak in two steps -- I've chosen the Host
756 static int __initdata asus_hides_smbus
= 0;
758 static void __init
asus_hides_smbus_hostbridge(struct pci_dev
*dev
)
760 if (unlikely(dev
->subsystem_vendor
== PCI_VENDOR_ID_ASUSTEK
)) {
761 if (dev
->device
== PCI_DEVICE_ID_INTEL_82845_HB
)
762 switch(dev
->subsystem_device
) {
763 case 0x8070: /* P4B */
764 case 0x8088: /* P4B533 */
765 case 0x1626: /* L3C notebook */
766 asus_hides_smbus
= 1;
768 if (dev
->device
== PCI_DEVICE_ID_INTEL_82845G_HB
)
769 switch(dev
->subsystem_device
) {
770 case 0x80b1: /* P4GE-V */
771 case 0x80b2: /* P4PE */
772 case 0x8093: /* P4B533-V */
773 asus_hides_smbus
= 1;
775 if (dev
->device
== PCI_DEVICE_ID_INTEL_82850_HB
)
776 switch(dev
->subsystem_device
) {
777 case 0x8030: /* P4T533 */
778 asus_hides_smbus
= 1;
780 if (dev
->device
== PCI_DEVICE_ID_INTEL_7205_0
)
781 switch (dev
->subsystem_device
) {
782 case 0x8070: /* P4G8X Deluxe */
783 asus_hides_smbus
= 1;
785 if (dev
->device
== PCI_DEVICE_ID_INTEL_82855GM_HB
)
786 switch (dev
->subsystem_device
) {
787 case 0x1751: /* M2N notebook */
788 case 0x1821: /* M5N notebook */
789 asus_hides_smbus
= 1;
791 if (dev
->device
== PCI_DEVICE_ID_INTEL_82855PM_HB
)
792 switch (dev
->subsystem_device
) {
793 case 0x184b: /* W1N notebook */
794 case 0x186a: /* M6Ne notebook */
795 asus_hides_smbus
= 1;
797 } else if (unlikely(dev
->subsystem_vendor
== PCI_VENDOR_ID_HP
)) {
798 if (dev
->device
== PCI_DEVICE_ID_INTEL_82855PM_HB
)
799 switch(dev
->subsystem_device
) {
800 case 0x088C: /* HP Compaq nc8000 */
801 case 0x0890: /* HP Compaq nc6000 */
802 asus_hides_smbus
= 1;
804 if (dev
->device
== PCI_DEVICE_ID_INTEL_82865_HB
)
805 switch (dev
->subsystem_device
) {
806 case 0x12bc: /* HP D330L */
807 asus_hides_smbus
= 1;
809 } else if (unlikely(dev
->subsystem_vendor
== PCI_VENDOR_ID_TOSHIBA
)) {
810 if (dev
->device
== PCI_DEVICE_ID_INTEL_82855GM_HB
)
811 switch(dev
->subsystem_device
) {
812 case 0x0001: /* Toshiba Satellite A40 */
813 asus_hides_smbus
= 1;
815 } else if (unlikely(dev
->subsystem_vendor
== PCI_VENDOR_ID_SAMSUNG
)) {
816 if (dev
->device
== PCI_DEVICE_ID_INTEL_82855PM_HB
)
817 switch(dev
->subsystem_device
) {
818 case 0xC00C: /* Samsung P35 notebook */
819 asus_hides_smbus
= 1;
823 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82845_HB
, asus_hides_smbus_hostbridge
);
824 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82845G_HB
, asus_hides_smbus_hostbridge
);
825 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82850_HB
, asus_hides_smbus_hostbridge
);
826 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82865_HB
, asus_hides_smbus_hostbridge
);
827 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_7205_0
, asus_hides_smbus_hostbridge
);
828 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82855PM_HB
, asus_hides_smbus_hostbridge
);
829 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82855GM_HB
, asus_hides_smbus_hostbridge
);
831 static void __init
asus_hides_smbus_lpc(struct pci_dev
*dev
)
835 if (likely(!asus_hides_smbus
))
838 pci_read_config_word(dev
, 0xF2, &val
);
840 pci_write_config_word(dev
, 0xF2, val
& (~0x8));
841 pci_read_config_word(dev
, 0xF2, &val
);
843 printk(KERN_INFO
"PCI: i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val
);
845 printk(KERN_INFO
"PCI: Enabled i801 SMBus device\n");
848 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801DB_0
, asus_hides_smbus_lpc
);
849 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801BA_0
, asus_hides_smbus_lpc
);
850 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801CA_12
, asus_hides_smbus_lpc
);
851 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801DB_12
, asus_hides_smbus_lpc
);
852 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82801EB_0
, asus_hides_smbus_lpc
);
855 * SiS 96x south bridge: BIOS typically hides SMBus device...
857 static void __init
quirk_sis_96x_smbus(struct pci_dev
*dev
)
860 printk(KERN_INFO
"Enabling SiS 96x SMBus.\n");
861 pci_read_config_byte(dev
, 0x77, &val
);
862 pci_write_config_byte(dev
, 0x77, val
& ~0x10);
863 pci_read_config_byte(dev
, 0x77, &val
);
867 #define UHCI_USBLEGSUP 0xc0 /* legacy support */
868 #define UHCI_USBCMD 0 /* command register */
869 #define UHCI_USBSTS 2 /* status register */
870 #define UHCI_USBINTR 4 /* interrupt register */
871 #define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
872 #define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
873 #define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
874 #define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
875 #define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
877 #define OHCI_CONTROL 0x04
878 #define OHCI_CMDSTATUS 0x08
879 #define OHCI_INTRSTATUS 0x0c
880 #define OHCI_INTRENABLE 0x10
881 #define OHCI_INTRDISABLE 0x14
882 #define OHCI_OCR (1 << 3) /* ownership change request */
883 #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
884 #define OHCI_INTR_OC (1 << 30) /* ownership change */
886 #define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
887 #define EHCI_USBCMD 0 /* command register */
888 #define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
889 #define EHCI_USBSTS 4 /* status register */
890 #define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
891 #define EHCI_USBINTR 8 /* interrupt register */
892 #define EHCI_USBLEGSUP 0 /* legacy support register */
893 #define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
894 #define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
895 #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
896 #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
898 int usb_early_handoff __devinitdata
= 0;
899 static int __init
usb_handoff_early(char *str
)
901 usb_early_handoff
= 1;
904 __setup("usb-handoff", usb_handoff_early
);
906 static void __devinit
quirk_usb_handoff_uhci(struct pci_dev
*pdev
)
908 unsigned long base
= 0;
909 int wait_time
, delta
;
913 for (i
= 0; i
< PCI_ROM_RESOURCE
; i
++)
914 if ((pci_resource_flags(pdev
, i
) & IORESOURCE_IO
)) {
915 base
= pci_resource_start(pdev
, i
);
925 sts
= inw(base
+ UHCI_USBSTS
);
926 val
= inw(base
+ UHCI_USBCMD
);
927 val
&= ~(u16
)(UHCI_USBCMD_RUN
| UHCI_USBCMD_CONFIGURE
);
928 outw(val
, base
+ UHCI_USBCMD
);
931 * wait while it stops if it was running
933 if ((sts
& UHCI_USBSTS_HALTED
) == 0)
939 outw(0x1f, base
+ UHCI_USBSTS
);
942 val
= inw(base
+ UHCI_USBSTS
);
943 if (val
& UHCI_USBSTS_HALTED
)
945 } while (wait_time
> 0);
949 * disable interrupts & legacy support
951 outw(0, base
+ UHCI_USBINTR
);
952 outw(0x1f, base
+ UHCI_USBSTS
);
953 pci_read_config_word(pdev
, UHCI_USBLEGSUP
, &val
);
955 pci_write_config_word(pdev
, UHCI_USBLEGSUP
, UHCI_USBLEGSUP_DEFAULT
);
959 static void __devinit
quirk_usb_handoff_ohci(struct pci_dev
*pdev
)
964 base
= ioremap_nocache(pci_resource_start(pdev
, 0),
965 pci_resource_len(pdev
, 0));
966 if (base
== NULL
) return;
968 if (readl(base
+ OHCI_CONTROL
) & OHCI_CTRL_IR
) {
969 wait_time
= 500; /* 0.5 seconds */
970 writel(OHCI_INTR_OC
, base
+ OHCI_INTRENABLE
);
971 writel(OHCI_OCR
, base
+ OHCI_CMDSTATUS
);
972 while (wait_time
> 0 &&
973 readl(base
+ OHCI_CONTROL
) & OHCI_CTRL_IR
) {
982 writel(~(u32
)0, base
+ OHCI_INTRDISABLE
);
983 writel(~(u32
)0, base
+ OHCI_INTRSTATUS
);
988 static void __devinit
quirk_usb_disable_ehci(struct pci_dev
*pdev
)
990 int wait_time
, delta
;
991 void __iomem
*base
, *op_reg_base
;
992 u32 hcc_params
, val
, temp
;
995 base
= ioremap_nocache(pci_resource_start(pdev
, 0),
996 pci_resource_len(pdev
, 0));
997 if (base
== NULL
) return;
999 cap_length
= readb(base
);
1000 op_reg_base
= base
+ cap_length
;
1001 hcc_params
= readl(base
+ EHCI_HCC_PARAMS
);
1002 hcc_params
= (hcc_params
>> 8) & 0xff;
1004 pci_read_config_dword(pdev
,
1005 hcc_params
+ EHCI_USBLEGSUP
,
1007 if (((val
& 0xff) == 1) && (val
& EHCI_USBLEGSUP_BIOS
)) {
1009 * Ok, BIOS is in smm mode, try to hand off...
1011 pci_read_config_dword(pdev
,
1012 hcc_params
+ EHCI_USBLEGCTLSTS
,
1014 pci_write_config_dword(pdev
,
1015 hcc_params
+ EHCI_USBLEGCTLSTS
,
1016 temp
| EHCI_USBLEGCTLSTS_SOOE
);
1017 val
|= EHCI_USBLEGSUP_OS
;
1018 pci_write_config_dword(pdev
,
1019 hcc_params
+ EHCI_USBLEGSUP
,
1026 pci_read_config_dword(pdev
,
1027 hcc_params
+ EHCI_USBLEGSUP
,
1029 } while (wait_time
&& (val
& EHCI_USBLEGSUP_BIOS
));
1032 * well, possibly buggy BIOS...
1034 printk(KERN_WARNING
"EHCI early BIOS handoff "
1035 "failed (BIOS bug ?)\n");
1036 pci_write_config_dword(pdev
,
1037 hcc_params
+ EHCI_USBLEGSUP
,
1039 pci_write_config_dword(pdev
,
1040 hcc_params
+ EHCI_USBLEGCTLSTS
,
1047 * halt EHCI & disable its interrupts in any case
1049 val
= readl(op_reg_base
+ EHCI_USBSTS
);
1050 if ((val
& EHCI_USBSTS_HALTED
) == 0) {
1051 val
= readl(op_reg_base
+ EHCI_USBCMD
);
1052 val
&= ~EHCI_USBCMD_RUN
;
1053 writel(val
, op_reg_base
+ EHCI_USBCMD
);
1058 writel(0x3f, op_reg_base
+ EHCI_USBSTS
);
1061 val
= readl(op_reg_base
+ EHCI_USBSTS
);
1062 if ((val
== ~(u32
)0) || (val
& EHCI_USBSTS_HALTED
)) {
1065 } while (wait_time
> 0);
1067 writel(0, op_reg_base
+ EHCI_USBINTR
);
1068 writel(0x3f, op_reg_base
+ EHCI_USBSTS
);
1077 static void __devinit
quirk_usb_early_handoff(struct pci_dev
*pdev
)
1079 if (!usb_early_handoff
)
1082 if (pdev
->class == ((PCI_CLASS_SERIAL_USB
<< 8) | 0x00)) { /* UHCI */
1083 quirk_usb_handoff_uhci(pdev
);
1084 } else if (pdev
->class == ((PCI_CLASS_SERIAL_USB
<< 8) | 0x10)) { /* OHCI */
1085 quirk_usb_handoff_ohci(pdev
);
1086 } else if (pdev
->class == ((PCI_CLASS_SERIAL_USB
<< 8) | 0x20)) { /* EHCI */
1087 quirk_usb_disable_ehci(pdev
);
1092 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID
, PCI_ANY_ID
, quirk_usb_early_handoff
);
1095 * ... This is further complicated by the fact that some SiS96x south
1096 * bridges pretend to be 85C503/5513 instead. In that case see if we
1097 * spotted a compatible north bridge to make sure.
1098 * (pci_find_device doesn't work yet)
1100 * We can also enable the sis96x bit in the discovery register..
1102 static int __devinitdata sis_96x_compatible
= 0;
1104 #define SIS_DETECT_REGISTER 0x40
1106 static void __init
quirk_sis_503(struct pci_dev
*dev
)
1111 pci_read_config_byte(dev
, SIS_DETECT_REGISTER
, ®
);
1112 pci_write_config_byte(dev
, SIS_DETECT_REGISTER
, reg
| (1 << 6));
1113 pci_read_config_word(dev
, PCI_DEVICE_ID
, &devid
);
1114 if (((devid
& 0xfff0) != 0x0960) && (devid
!= 0x0018)) {
1115 pci_write_config_byte(dev
, SIS_DETECT_REGISTER
, reg
);
1119 /* Make people aware that we changed the config.. */
1120 printk(KERN_WARNING
"Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid
, sis_96x_compatible
);
1123 * Ok, it now shows up as a 96x.. The 96x quirks are after
1124 * the 503 quirk in the quirk table, so they'll automatically
1125 * run and enable things like the SMBus device
1127 dev
->device
= devid
;
1130 static void __init
quirk_sis_96x_compatible(struct pci_dev
*dev
)
1132 sis_96x_compatible
= 1;
1134 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_645
, quirk_sis_96x_compatible
);
1135 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_646
, quirk_sis_96x_compatible
);
1136 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_648
, quirk_sis_96x_compatible
);
1137 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_650
, quirk_sis_96x_compatible
);
1138 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_651
, quirk_sis_96x_compatible
);
1139 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_735
, quirk_sis_96x_compatible
);
1141 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_503
, quirk_sis_503
);
1143 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_961
, quirk_sis_96x_smbus
);
1144 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_962
, quirk_sis_96x_smbus
);
1145 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_963
, quirk_sis_96x_smbus
);
1146 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_LPC
, quirk_sis_96x_smbus
);
1148 #ifdef CONFIG_X86_IO_APIC
1149 static void __init
quirk_alder_ioapic(struct pci_dev
*pdev
)
1153 if ((pdev
->class >> 8) != 0xff00)
1156 /* the first BAR is the location of the IO APIC...we must
1157 * not touch this (and it's already covered by the fixmap), so
1158 * forcibly insert it into the resource tree */
1159 if (pci_resource_start(pdev
, 0) && pci_resource_len(pdev
, 0))
1160 insert_resource(&iomem_resource
, &pdev
->resource
[0]);
1162 /* The next five BARs all seem to be rubbish, so just clean
1164 for (i
=1; i
< 6; i
++) {
1165 memset(&pdev
->resource
[i
], 0, sizeof(pdev
->resource
[i
]));
1169 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_EESSC
, quirk_alder_ioapic
);
1172 #ifdef CONFIG_SCSI_SATA
1173 static void __devinit
quirk_intel_ide_combined(struct pci_dev
*pdev
)
1179 * Narrow down to Intel SATA PCI devices.
1181 switch (pdev
->device
) {
1182 /* PCI ids taken from drivers/scsi/ata_piix.c */
1199 /* we do not handle this PCI device */
1204 * Read combined mode register.
1206 pci_read_config_byte(pdev
, 0x90, &tmp
); /* combined mode reg */
1209 tmp
&= 0x6; /* interesting bits 2:1, PATA primary/secondary */
1210 if (tmp
== 0x4) /* bits 10x */
1211 comb
= (1 << 0); /* SATA port 0, PATA port 1 */
1212 else if (tmp
== 0x6) /* bits 11x */
1213 comb
= (1 << 2); /* PATA port 0, SATA port 1 */
1215 return; /* not in combined mode */
1217 WARN_ON((ich
!= 6) && (ich
!= 7));
1218 tmp
&= 0x3; /* interesting bits 1:0 */
1220 comb
= (1 << 2); /* PATA port 0, SATA port 1 */
1221 else if (tmp
& (1 << 1))
1222 comb
= (1 << 0); /* SATA port 0, PATA port 1 */
1224 return; /* not in combined mode */
1228 * Read programming interface register.
1229 * (Tells us if it's legacy or native mode)
1231 pci_read_config_byte(pdev
, PCI_CLASS_PROG
, &prog
);
1233 /* if SATA port is in native mode, we're ok. */
1237 /* SATA port is in legacy mode. Reserve port so that
1238 * IDE driver does not attempt to use it. If request_region
1239 * fails, it will be obvious at boot time, so we don't bother
1240 * checking return values.
1242 if (comb
== (1 << 0))
1243 request_region(0x1f0, 8, "libata"); /* port 0 */
1245 request_region(0x170, 8, "libata"); /* port 1 */
1247 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_ANY_ID
, quirk_intel_ide_combined
);
1248 #endif /* CONFIG_SCSI_SATA */
1253 static void __devinit
quirk_pcie_mch(struct pci_dev
*pdev
)
1257 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_E7520_MCH
, quirk_pcie_mch
);
1258 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_E7320_MCH
, quirk_pcie_mch
);
1259 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_E7525_MCH
, quirk_pcie_mch
);
1261 static void __devinit
quirk_netmos(struct pci_dev
*dev
)
1263 unsigned int num_parallel
= (dev
->subsystem_device
& 0xf0) >> 4;
1264 unsigned int num_serial
= dev
->subsystem_device
& 0xf;
1267 * These Netmos parts are multiport serial devices with optional
1268 * parallel ports. Even when parallel ports are present, they
1269 * are identified as class SERIAL, which means the serial driver
1270 * will claim them. To prevent this, mark them as class OTHER.
1271 * These combo devices should be claimed by parport_serial.
1273 * The subdevice ID is of the form 0x00PS, where <P> is the number
1274 * of parallel ports and <S> is the number of serial ports.
1276 switch (dev
->device
) {
1277 case PCI_DEVICE_ID_NETMOS_9735
:
1278 case PCI_DEVICE_ID_NETMOS_9745
:
1279 case PCI_DEVICE_ID_NETMOS_9835
:
1280 case PCI_DEVICE_ID_NETMOS_9845
:
1281 case PCI_DEVICE_ID_NETMOS_9855
:
1282 if ((dev
->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL
&&
1284 printk(KERN_INFO
"PCI: Netmos %04x (%u parallel, "
1285 "%u serial); changing class SERIAL to OTHER "
1286 "(use parport_serial)\n",
1287 dev
->device
, num_parallel
, num_serial
);
1288 dev
->class = (PCI_CLASS_COMMUNICATION_OTHER
<< 8) |
1289 (dev
->class & 0xff);
1293 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS
, PCI_ANY_ID
, quirk_netmos
);
1295 static void pci_do_fixups(struct pci_dev
*dev
, struct pci_fixup
*f
, struct pci_fixup
*end
)
1298 if ((f
->vendor
== dev
->vendor
|| f
->vendor
== (u16
) PCI_ANY_ID
) &&
1299 (f
->device
== dev
->device
|| f
->device
== (u16
) PCI_ANY_ID
)) {
1300 pr_debug("PCI: Calling quirk %p for %s\n", f
->hook
, pci_name(dev
));
1307 extern struct pci_fixup __start_pci_fixups_early
[];
1308 extern struct pci_fixup __end_pci_fixups_early
[];
1309 extern struct pci_fixup __start_pci_fixups_header
[];
1310 extern struct pci_fixup __end_pci_fixups_header
[];
1311 extern struct pci_fixup __start_pci_fixups_final
[];
1312 extern struct pci_fixup __end_pci_fixups_final
[];
1313 extern struct pci_fixup __start_pci_fixups_enable
[];
1314 extern struct pci_fixup __end_pci_fixups_enable
[];
1317 void pci_fixup_device(enum pci_fixup_pass pass
, struct pci_dev
*dev
)
1319 struct pci_fixup
*start
, *end
;
1322 case pci_fixup_early
:
1323 start
= __start_pci_fixups_early
;
1324 end
= __end_pci_fixups_early
;
1327 case pci_fixup_header
:
1328 start
= __start_pci_fixups_header
;
1329 end
= __end_pci_fixups_header
;
1332 case pci_fixup_final
:
1333 start
= __start_pci_fixups_final
;
1334 end
= __end_pci_fixups_final
;
1337 case pci_fixup_enable
:
1338 start
= __start_pci_fixups_enable
;
1339 end
= __end_pci_fixups_enable
;
1343 /* stupid compiler warning, you would think with an enum... */
1346 pci_do_fixups(dev
, start
, end
);
1349 EXPORT_SYMBOL(pcie_mch_quirk
);
1350 #ifdef CONFIG_HOTPLUG
1351 EXPORT_SYMBOL(pci_fixup_device
);