2 * Samsung EXYNOS5 SoC series USB DRD PHY driver
4 * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
6 * Copyright (C) 2014 Samsung Electronics Co., Ltd.
7 * Author: Vivek Gautam <gautam.vivek@samsung.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/clk.h>
15 #include <linux/delay.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
20 #include <linux/of_address.h>
21 #include <linux/of_device.h>
22 #include <linux/phy/phy.h>
23 #include <linux/platform_device.h>
24 #include <linux/mutex.h>
25 #include <linux/mfd/syscon.h>
26 #include <linux/regmap.h>
27 #include <linux/regulator/consumer.h>
28 #include <linux/soc/samsung/exynos-regs-pmu.h>
30 /* Exynos USB PHY registers */
31 #define EXYNOS5_FSEL_9MHZ6 0x0
32 #define EXYNOS5_FSEL_10MHZ 0x1
33 #define EXYNOS5_FSEL_12MHZ 0x2
34 #define EXYNOS5_FSEL_19MHZ2 0x3
35 #define EXYNOS5_FSEL_20MHZ 0x4
36 #define EXYNOS5_FSEL_24MHZ 0x5
37 #define EXYNOS5_FSEL_50MHZ 0x7
39 /* EXYNOS5: USB 3.0 DRD PHY registers */
40 #define EXYNOS5_DRD_LINKSYSTEM 0x04
42 #define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
43 #define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
44 #define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27)
46 #define EXYNOS5_DRD_PHYUTMI 0x08
48 #define PHYUTMI_OTGDISABLE BIT(6)
49 #define PHYUTMI_FORCESUSPEND BIT(1)
50 #define PHYUTMI_FORCESLEEP BIT(0)
52 #define EXYNOS5_DRD_PHYPIPE 0x0c
54 #define EXYNOS5_DRD_PHYCLKRST 0x10
56 #define PHYCLKRST_EN_UTMISUSPEND BIT(31)
58 #define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
59 #define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
61 #define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
62 #define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
64 #define PHYCLKRST_SSC_EN BIT(20)
65 #define PHYCLKRST_REF_SSP_EN BIT(19)
66 #define PHYCLKRST_REF_CLKDIV2 BIT(18)
68 #define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
69 #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
70 #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11)
71 #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
72 #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
73 #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
75 #define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5)
76 #define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8)
77 #define PHYCLKRST_FSEL(_x) ((_x) << 5)
78 #define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
79 #define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
80 #define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
81 #define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
83 #define PHYCLKRST_RETENABLEN BIT(4)
85 #define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
86 #define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
87 #define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
89 #define PHYCLKRST_PORTRESET BIT(1)
90 #define PHYCLKRST_COMMONONN BIT(0)
92 #define EXYNOS5_DRD_PHYREG0 0x14
93 #define EXYNOS5_DRD_PHYREG1 0x18
95 #define EXYNOS5_DRD_PHYPARAM0 0x1c
97 #define PHYPARAM0_REF_USE_PAD BIT(31)
98 #define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
99 #define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
101 #define EXYNOS5_DRD_PHYPARAM1 0x20
103 #define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
104 #define PHYPARAM1_PCS_TXDEEMPH (0x1c)
106 #define EXYNOS5_DRD_PHYTERM 0x24
108 #define EXYNOS5_DRD_PHYTEST 0x28
110 #define PHYTEST_POWERDOWN_SSP BIT(3)
111 #define PHYTEST_POWERDOWN_HSP BIT(2)
113 #define EXYNOS5_DRD_PHYADP 0x2c
115 #define EXYNOS5_DRD_PHYUTMICLKSEL 0x30
117 #define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2)
119 #define EXYNOS5_DRD_PHYRESUME 0x34
120 #define EXYNOS5_DRD_LINKPORT 0x44
123 #define MHZ (KHZ * KHZ)
125 enum exynos5_usbdrd_phy_id
{
127 EXYNOS5_DRDPHY_PIPE3
,
131 struct phy_usb_instance
;
132 struct exynos5_usbdrd_phy
;
134 struct exynos5_usbdrd_phy_config
{
136 void (*phy_isol
)(struct phy_usb_instance
*inst
, u32 on
);
137 void (*phy_init
)(struct exynos5_usbdrd_phy
*phy_drd
);
138 unsigned int (*set_refclk
)(struct phy_usb_instance
*inst
);
141 struct exynos5_usbdrd_phy_drvdata
{
142 const struct exynos5_usbdrd_phy_config
*phy_cfg
;
143 u32 pmu_offset_usbdrd0_phy
;
144 u32 pmu_offset_usbdrd1_phy
;
145 bool has_common_clk_gate
;
149 * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
150 * @dev: pointer to device instance of this platform device
151 * @reg_phy: usb phy controller register memory base
152 * @clk: phy clock for register access
153 * @pipeclk: clock for pipe3 phy
154 * @utmiclk: clock for utmi+ phy
155 * @itpclk: clock for ITP generation
156 * @drv_data: pointer to SoC level driver data structure
157 * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
158 * instances each with its 'phy' and 'phy_cfg'.
159 * @extrefclk: frequency select settings when using 'separate
160 * reference clocks' for SS and HS operations
161 * @ref_clk: reference clock to PHY block from which PHY's
162 * operational clocks are derived
163 * vbus: VBUS regulator for phy
164 * vbus_boost: Boost regulator for VBUS present on few Exynos boards
166 struct exynos5_usbdrd_phy
{
168 void __iomem
*reg_phy
;
173 const struct exynos5_usbdrd_phy_drvdata
*drv_data
;
174 struct phy_usb_instance
{
177 struct regmap
*reg_pmu
;
179 const struct exynos5_usbdrd_phy_config
*phy_cfg
;
180 } phys
[EXYNOS5_DRDPHYS_NUM
];
183 struct regulator
*vbus
;
184 struct regulator
*vbus_boost
;
188 struct exynos5_usbdrd_phy
*to_usbdrd_phy(struct phy_usb_instance
*inst
)
190 return container_of((inst
), struct exynos5_usbdrd_phy
,
191 phys
[(inst
)->index
]);
195 * exynos5_rate_to_clk() converts the supplied clock rate to the value that
196 * can be written to the phy register.
198 static unsigned int exynos5_rate_to_clk(unsigned long rate
, u32
*reg
)
200 /* EXYNOS5_FSEL_MASK */
204 *reg
= EXYNOS5_FSEL_9MHZ6
;
207 *reg
= EXYNOS5_FSEL_10MHZ
;
210 *reg
= EXYNOS5_FSEL_12MHZ
;
213 *reg
= EXYNOS5_FSEL_19MHZ2
;
216 *reg
= EXYNOS5_FSEL_20MHZ
;
219 *reg
= EXYNOS5_FSEL_24MHZ
;
222 *reg
= EXYNOS5_FSEL_50MHZ
;
231 static void exynos5_usbdrd_phy_isol(struct phy_usb_instance
*inst
,
239 val
= on
? 0 : EXYNOS4_PHY_ENABLE
;
241 regmap_update_bits(inst
->reg_pmu
, inst
->pmu_offset
,
242 EXYNOS4_PHY_ENABLE
, val
);
246 * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock
247 * from clock core. Further sets multiplier values and spread spectrum
248 * clock settings for SuperSpeed operations.
251 exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance
*inst
)
254 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
256 /* restore any previous reference clock settings */
257 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
259 /* Use EXTREFCLK as ref clock */
260 reg
&= ~PHYCLKRST_REFCLKSEL_MASK
;
261 reg
|= PHYCLKRST_REFCLKSEL_EXT_REFCLK
;
263 /* FSEL settings corresponding to reference clock */
264 reg
&= ~PHYCLKRST_FSEL_PIPE_MASK
|
265 PHYCLKRST_MPLL_MULTIPLIER_MASK
|
266 PHYCLKRST_SSC_REFCLKSEL_MASK
;
267 switch (phy_drd
->extrefclk
) {
268 case EXYNOS5_FSEL_50MHZ
:
269 reg
|= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF
|
270 PHYCLKRST_SSC_REFCLKSEL(0x00));
272 case EXYNOS5_FSEL_24MHZ
:
273 reg
|= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF
|
274 PHYCLKRST_SSC_REFCLKSEL(0x88));
276 case EXYNOS5_FSEL_20MHZ
:
277 reg
|= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF
|
278 PHYCLKRST_SSC_REFCLKSEL(0x00));
280 case EXYNOS5_FSEL_19MHZ2
:
281 reg
|= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF
|
282 PHYCLKRST_SSC_REFCLKSEL(0x88));
285 dev_dbg(phy_drd
->dev
, "unsupported ref clk\n");
293 * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock
294 * from clock core. Further sets the FSEL values for HighSpeed operations.
297 exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance
*inst
)
300 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
302 /* restore any previous reference clock settings */
303 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
305 reg
&= ~PHYCLKRST_REFCLKSEL_MASK
;
306 reg
|= PHYCLKRST_REFCLKSEL_EXT_REFCLK
;
308 reg
&= ~PHYCLKRST_FSEL_UTMI_MASK
|
309 PHYCLKRST_MPLL_MULTIPLIER_MASK
|
310 PHYCLKRST_SSC_REFCLKSEL_MASK
;
311 reg
|= PHYCLKRST_FSEL(phy_drd
->extrefclk
);
316 static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy
*phy_drd
)
320 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM1
);
321 /* Set Tx De-Emphasis level */
322 reg
&= ~PHYPARAM1_PCS_TXDEEMPH_MASK
;
323 reg
|= PHYPARAM1_PCS_TXDEEMPH
;
324 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM1
);
326 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
327 reg
&= ~PHYTEST_POWERDOWN_SSP
;
328 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
331 static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy
*phy_drd
)
335 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM0
);
336 /* Set Loss-of-Signal Detector sensitivity */
337 reg
&= ~PHYPARAM0_REF_LOSLEVEL_MASK
;
338 reg
|= PHYPARAM0_REF_LOSLEVEL
;
339 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM0
);
341 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM1
);
342 /* Set Tx De-Emphasis level */
343 reg
&= ~PHYPARAM1_PCS_TXDEEMPH_MASK
;
344 reg
|= PHYPARAM1_PCS_TXDEEMPH
;
345 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM1
);
347 /* UTMI Power Control */
348 writel(PHYUTMI_OTGDISABLE
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYUTMI
);
350 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
351 reg
&= ~PHYTEST_POWERDOWN_HSP
;
352 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
355 static int exynos5_usbdrd_phy_init(struct phy
*phy
)
359 struct phy_usb_instance
*inst
= phy_get_drvdata(phy
);
360 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
362 ret
= clk_prepare_enable(phy_drd
->clk
);
366 /* Reset USB 3.0 PHY */
367 writel(0x0, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYREG0
);
368 writel(0x0, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYRESUME
);
371 * Setting the Frame length Adj value[6:1] to default 0x20
372 * See xHCI 1.0 spec, 5.2.4
374 reg
= LINKSYSTEM_XHCI_VERSION_CONTROL
|
375 LINKSYSTEM_FLADJ(0x20);
376 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_LINKSYSTEM
);
378 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM0
);
379 /* Select PHY CLK source */
380 reg
&= ~PHYPARAM0_REF_USE_PAD
;
381 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYPARAM0
);
383 /* This bit must be set for both HS and SS operations */
384 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYUTMICLKSEL
);
385 reg
|= PHYUTMICLKSEL_UTMI_CLKSEL
;
386 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYUTMICLKSEL
);
388 /* UTMI or PIPE3 specific init */
389 inst
->phy_cfg
->phy_init(phy_drd
);
391 /* reference clock settings */
392 reg
= inst
->phy_cfg
->set_refclk(inst
);
394 /* Digital power supply in normal operating mode */
395 reg
|= PHYCLKRST_RETENABLEN
|
396 /* Enable ref clock for SS function */
397 PHYCLKRST_REF_SSP_EN
|
398 /* Enable spread spectrum */
400 /* Power down HS Bias and PLL blocks in suspend mode */
401 PHYCLKRST_COMMONONN
|
405 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
409 reg
&= ~PHYCLKRST_PORTRESET
;
410 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
412 clk_disable_unprepare(phy_drd
->clk
);
417 static int exynos5_usbdrd_phy_exit(struct phy
*phy
)
421 struct phy_usb_instance
*inst
= phy_get_drvdata(phy
);
422 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
424 ret
= clk_prepare_enable(phy_drd
->clk
);
428 reg
= PHYUTMI_OTGDISABLE
|
429 PHYUTMI_FORCESUSPEND
|
431 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYUTMI
);
433 /* Resetting the PHYCLKRST enable bits to reduce leakage current */
434 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
435 reg
&= ~(PHYCLKRST_REF_SSP_EN
|
437 PHYCLKRST_COMMONONN
);
438 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYCLKRST
);
440 /* Control PHYTEST to remove leakage current */
441 reg
= readl(phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
442 reg
|= PHYTEST_POWERDOWN_SSP
|
443 PHYTEST_POWERDOWN_HSP
;
444 writel(reg
, phy_drd
->reg_phy
+ EXYNOS5_DRD_PHYTEST
);
446 clk_disable_unprepare(phy_drd
->clk
);
451 static int exynos5_usbdrd_phy_power_on(struct phy
*phy
)
454 struct phy_usb_instance
*inst
= phy_get_drvdata(phy
);
455 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
457 dev_dbg(phy_drd
->dev
, "Request to power_on usbdrd_phy phy\n");
459 clk_prepare_enable(phy_drd
->ref_clk
);
460 if (!phy_drd
->drv_data
->has_common_clk_gate
) {
461 clk_prepare_enable(phy_drd
->pipeclk
);
462 clk_prepare_enable(phy_drd
->utmiclk
);
463 clk_prepare_enable(phy_drd
->itpclk
);
466 /* Enable VBUS supply */
467 if (phy_drd
->vbus_boost
) {
468 ret
= regulator_enable(phy_drd
->vbus_boost
);
470 dev_err(phy_drd
->dev
,
471 "Failed to enable VBUS boost supply\n");
477 ret
= regulator_enable(phy_drd
->vbus
);
479 dev_err(phy_drd
->dev
, "Failed to enable VBUS supply\n");
480 goto fail_vbus_boost
;
485 inst
->phy_cfg
->phy_isol(inst
, 0);
490 if (phy_drd
->vbus_boost
)
491 regulator_disable(phy_drd
->vbus_boost
);
494 clk_disable_unprepare(phy_drd
->ref_clk
);
495 if (!phy_drd
->drv_data
->has_common_clk_gate
) {
496 clk_disable_unprepare(phy_drd
->itpclk
);
497 clk_disable_unprepare(phy_drd
->utmiclk
);
498 clk_disable_unprepare(phy_drd
->pipeclk
);
504 static int exynos5_usbdrd_phy_power_off(struct phy
*phy
)
506 struct phy_usb_instance
*inst
= phy_get_drvdata(phy
);
507 struct exynos5_usbdrd_phy
*phy_drd
= to_usbdrd_phy(inst
);
509 dev_dbg(phy_drd
->dev
, "Request to power_off usbdrd_phy phy\n");
511 /* Power-off the PHY */
512 inst
->phy_cfg
->phy_isol(inst
, 1);
514 /* Disable VBUS supply */
516 regulator_disable(phy_drd
->vbus
);
517 if (phy_drd
->vbus_boost
)
518 regulator_disable(phy_drd
->vbus_boost
);
520 clk_disable_unprepare(phy_drd
->ref_clk
);
521 if (!phy_drd
->drv_data
->has_common_clk_gate
) {
522 clk_disable_unprepare(phy_drd
->itpclk
);
523 clk_disable_unprepare(phy_drd
->pipeclk
);
524 clk_disable_unprepare(phy_drd
->utmiclk
);
530 static struct phy
*exynos5_usbdrd_phy_xlate(struct device
*dev
,
531 struct of_phandle_args
*args
)
533 struct exynos5_usbdrd_phy
*phy_drd
= dev_get_drvdata(dev
);
535 if (WARN_ON(args
->args
[0] >= EXYNOS5_DRDPHYS_NUM
))
536 return ERR_PTR(-ENODEV
);
538 return phy_drd
->phys
[args
->args
[0]].phy
;
541 static const struct phy_ops exynos5_usbdrd_phy_ops
= {
542 .init
= exynos5_usbdrd_phy_init
,
543 .exit
= exynos5_usbdrd_phy_exit
,
544 .power_on
= exynos5_usbdrd_phy_power_on
,
545 .power_off
= exynos5_usbdrd_phy_power_off
,
546 .owner
= THIS_MODULE
,
549 static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy
*phy_drd
)
551 unsigned long ref_rate
;
554 phy_drd
->clk
= devm_clk_get(phy_drd
->dev
, "phy");
555 if (IS_ERR(phy_drd
->clk
)) {
556 dev_err(phy_drd
->dev
, "Failed to get phy clock\n");
557 return PTR_ERR(phy_drd
->clk
);
560 phy_drd
->ref_clk
= devm_clk_get(phy_drd
->dev
, "ref");
561 if (IS_ERR(phy_drd
->ref_clk
)) {
562 dev_err(phy_drd
->dev
, "Failed to get phy reference clock\n");
563 return PTR_ERR(phy_drd
->ref_clk
);
565 ref_rate
= clk_get_rate(phy_drd
->ref_clk
);
567 ret
= exynos5_rate_to_clk(ref_rate
, &phy_drd
->extrefclk
);
569 dev_err(phy_drd
->dev
, "Clock rate (%ld) not supported\n",
574 if (!phy_drd
->drv_data
->has_common_clk_gate
) {
575 phy_drd
->pipeclk
= devm_clk_get(phy_drd
->dev
, "phy_pipe");
576 if (IS_ERR(phy_drd
->pipeclk
)) {
577 dev_info(phy_drd
->dev
,
578 "PIPE3 phy operational clock not specified\n");
579 phy_drd
->pipeclk
= NULL
;
582 phy_drd
->utmiclk
= devm_clk_get(phy_drd
->dev
, "phy_utmi");
583 if (IS_ERR(phy_drd
->utmiclk
)) {
584 dev_info(phy_drd
->dev
,
585 "UTMI phy operational clock not specified\n");
586 phy_drd
->utmiclk
= NULL
;
589 phy_drd
->itpclk
= devm_clk_get(phy_drd
->dev
, "itp");
590 if (IS_ERR(phy_drd
->itpclk
)) {
591 dev_info(phy_drd
->dev
,
592 "ITP clock from main OSC not specified\n");
593 phy_drd
->itpclk
= NULL
;
600 static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5
[] = {
602 .id
= EXYNOS5_DRDPHY_UTMI
,
603 .phy_isol
= exynos5_usbdrd_phy_isol
,
604 .phy_init
= exynos5_usbdrd_utmi_init
,
605 .set_refclk
= exynos5_usbdrd_utmi_set_refclk
,
608 .id
= EXYNOS5_DRDPHY_PIPE3
,
609 .phy_isol
= exynos5_usbdrd_phy_isol
,
610 .phy_init
= exynos5_usbdrd_pipe3_init
,
611 .set_refclk
= exynos5_usbdrd_pipe3_set_refclk
,
615 static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy
= {
616 .phy_cfg
= phy_cfg_exynos5
,
617 .pmu_offset_usbdrd0_phy
= EXYNOS5_USBDRD_PHY_CONTROL
,
618 .pmu_offset_usbdrd1_phy
= EXYNOS5420_USBDRD1_PHY_CONTROL
,
619 .has_common_clk_gate
= true,
622 static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy
= {
623 .phy_cfg
= phy_cfg_exynos5
,
624 .pmu_offset_usbdrd0_phy
= EXYNOS5_USBDRD_PHY_CONTROL
,
625 .has_common_clk_gate
= true,
628 static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy
= {
629 .phy_cfg
= phy_cfg_exynos5
,
630 .pmu_offset_usbdrd0_phy
= EXYNOS5_USBDRD_PHY_CONTROL
,
631 .pmu_offset_usbdrd1_phy
= EXYNOS5433_USBHOST30_PHY_CONTROL
,
632 .has_common_clk_gate
= false,
635 static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy
= {
636 .phy_cfg
= phy_cfg_exynos5
,
637 .pmu_offset_usbdrd0_phy
= EXYNOS5_USBDRD_PHY_CONTROL
,
638 .has_common_clk_gate
= false,
641 static const struct of_device_id exynos5_usbdrd_phy_of_match
[] = {
643 .compatible
= "samsung,exynos5250-usbdrd-phy",
644 .data
= &exynos5250_usbdrd_phy
646 .compatible
= "samsung,exynos5420-usbdrd-phy",
647 .data
= &exynos5420_usbdrd_phy
649 .compatible
= "samsung,exynos5433-usbdrd-phy",
650 .data
= &exynos5433_usbdrd_phy
652 .compatible
= "samsung,exynos7-usbdrd-phy",
653 .data
= &exynos7_usbdrd_phy
657 MODULE_DEVICE_TABLE(of
, exynos5_usbdrd_phy_of_match
);
659 static int exynos5_usbdrd_phy_probe(struct platform_device
*pdev
)
661 struct device
*dev
= &pdev
->dev
;
662 struct device_node
*node
= dev
->of_node
;
663 struct exynos5_usbdrd_phy
*phy_drd
;
664 struct phy_provider
*phy_provider
;
665 struct resource
*res
;
666 const struct exynos5_usbdrd_phy_drvdata
*drv_data
;
667 struct regmap
*reg_pmu
;
672 phy_drd
= devm_kzalloc(dev
, sizeof(*phy_drd
), GFP_KERNEL
);
676 dev_set_drvdata(dev
, phy_drd
);
679 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
680 phy_drd
->reg_phy
= devm_ioremap_resource(dev
, res
);
681 if (IS_ERR(phy_drd
->reg_phy
))
682 return PTR_ERR(phy_drd
->reg_phy
);
684 drv_data
= of_device_get_match_data(dev
);
688 phy_drd
->drv_data
= drv_data
;
690 ret
= exynos5_usbdrd_phy_clk_handle(phy_drd
);
692 dev_err(dev
, "Failed to initialize clocks\n");
696 reg_pmu
= syscon_regmap_lookup_by_phandle(dev
->of_node
,
697 "samsung,pmu-syscon");
698 if (IS_ERR(reg_pmu
)) {
699 dev_err(dev
, "Failed to lookup PMU regmap\n");
700 return PTR_ERR(reg_pmu
);
704 * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with
705 * each having separate power control registers.
706 * 'channel' facilitates to set such registers.
708 channel
= of_alias_get_id(node
, "usbdrdphy");
710 dev_dbg(dev
, "Not a multi-controller usbdrd phy\n");
714 pmu_offset
= phy_drd
->drv_data
->pmu_offset_usbdrd1_phy
;
718 pmu_offset
= phy_drd
->drv_data
->pmu_offset_usbdrd0_phy
;
722 /* Get Vbus regulators */
723 phy_drd
->vbus
= devm_regulator_get(dev
, "vbus");
724 if (IS_ERR(phy_drd
->vbus
)) {
725 ret
= PTR_ERR(phy_drd
->vbus
);
726 if (ret
== -EPROBE_DEFER
)
729 dev_warn(dev
, "Failed to get VBUS supply regulator\n");
730 phy_drd
->vbus
= NULL
;
733 phy_drd
->vbus_boost
= devm_regulator_get(dev
, "vbus-boost");
734 if (IS_ERR(phy_drd
->vbus_boost
)) {
735 ret
= PTR_ERR(phy_drd
->vbus_boost
);
736 if (ret
== -EPROBE_DEFER
)
739 dev_warn(dev
, "Failed to get VBUS boost supply regulator\n");
740 phy_drd
->vbus_boost
= NULL
;
743 dev_vdbg(dev
, "Creating usbdrd_phy phy\n");
745 for (i
= 0; i
< EXYNOS5_DRDPHYS_NUM
; i
++) {
746 struct phy
*phy
= devm_phy_create(dev
, NULL
,
747 &exynos5_usbdrd_phy_ops
);
749 dev_err(dev
, "Failed to create usbdrd_phy phy\n");
753 phy_drd
->phys
[i
].phy
= phy
;
754 phy_drd
->phys
[i
].index
= i
;
755 phy_drd
->phys
[i
].reg_pmu
= reg_pmu
;
756 phy_drd
->phys
[i
].pmu_offset
= pmu_offset
;
757 phy_drd
->phys
[i
].phy_cfg
= &drv_data
->phy_cfg
[i
];
758 phy_set_drvdata(phy
, &phy_drd
->phys
[i
]);
761 phy_provider
= devm_of_phy_provider_register(dev
,
762 exynos5_usbdrd_phy_xlate
);
763 if (IS_ERR(phy_provider
)) {
764 dev_err(phy_drd
->dev
, "Failed to register phy provider\n");
765 return PTR_ERR(phy_provider
);
771 static struct platform_driver exynos5_usb3drd_phy
= {
772 .probe
= exynos5_usbdrd_phy_probe
,
774 .of_match_table
= exynos5_usbdrd_phy_of_match
,
775 .name
= "exynos5_usb3drd_phy",
779 module_platform_driver(exynos5_usb3drd_phy
);
780 MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver");
781 MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
782 MODULE_LICENSE("GPL v2");
783 MODULE_ALIAS("platform:exynos5_usb3drd_phy");