]> git.proxmox.com Git - mirror_qemu.git/blob - include/hw/virtio/virtio-blk.h
virtio-blk: Move VirtIOBlockReq to header
[mirror_qemu.git] / include / hw / virtio / virtio-blk.h
1 /*
2 * Virtio Block Device
3 *
4 * Copyright IBM, Corp. 2007
5 *
6 * Authors:
7 * Anthony Liguori <aliguori@us.ibm.com>
8 *
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
11 *
12 */
13
14 #ifndef _QEMU_VIRTIO_BLK_H
15 #define _QEMU_VIRTIO_BLK_H
16
17 #include "hw/virtio/virtio.h"
18 #include "hw/block/block.h"
19 #include "sysemu/iothread.h"
20 #include "block/block.h"
21
22 #define TYPE_VIRTIO_BLK "virtio-blk-device"
23 #define VIRTIO_BLK(obj) \
24 OBJECT_CHECK(VirtIOBlock, (obj), TYPE_VIRTIO_BLK)
25
26 /* from Linux's linux/virtio_blk.h */
27
28 /* The ID for virtio_block */
29 #define VIRTIO_ID_BLOCK 2
30
31 /* Feature bits */
32 #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
33 #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
34 #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
35 #define VIRTIO_BLK_F_GEOMETRY 4 /* Indicates support of legacy geometry */
36 #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
37 #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
38 #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
39 /* #define VIRTIO_BLK_F_IDENTIFY 8 ATA IDENTIFY supported, DEPRECATED */
40 #define VIRTIO_BLK_F_WCE 9 /* write cache enabled */
41 #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
42 #define VIRTIO_BLK_F_CONFIG_WCE 11 /* write cache configurable */
43
44 #define VIRTIO_BLK_ID_BYTES 20 /* ID string length */
45
46 struct virtio_blk_config
47 {
48 uint64_t capacity;
49 uint32_t size_max;
50 uint32_t seg_max;
51 uint16_t cylinders;
52 uint8_t heads;
53 uint8_t sectors;
54 uint32_t blk_size;
55 uint8_t physical_block_exp;
56 uint8_t alignment_offset;
57 uint16_t min_io_size;
58 uint32_t opt_io_size;
59 uint8_t wce;
60 } QEMU_PACKED;
61
62 /* These two define direction. */
63 #define VIRTIO_BLK_T_IN 0
64 #define VIRTIO_BLK_T_OUT 1
65
66 /* This bit says it's a scsi command, not an actual read or write. */
67 #define VIRTIO_BLK_T_SCSI_CMD 2
68
69 /* Flush the volatile write cache */
70 #define VIRTIO_BLK_T_FLUSH 4
71
72 /* return the device ID string */
73 #define VIRTIO_BLK_T_GET_ID 8
74
75 /* Barrier before this op. */
76 #define VIRTIO_BLK_T_BARRIER 0x80000000
77
78 /* This is the first element of the read scatter-gather list. */
79 struct virtio_blk_outhdr
80 {
81 /* VIRTIO_BLK_T* */
82 uint32_t type;
83 /* io priority. */
84 uint32_t ioprio;
85 /* Sector (ie. 512 byte offset) */
86 uint64_t sector;
87 };
88
89 #define VIRTIO_BLK_S_OK 0
90 #define VIRTIO_BLK_S_IOERR 1
91 #define VIRTIO_BLK_S_UNSUPP 2
92
93 /* This is the last element of the write scatter-gather list */
94 struct virtio_blk_inhdr
95 {
96 unsigned char status;
97 };
98
99 /* SCSI pass-through header */
100 struct virtio_scsi_inhdr
101 {
102 uint32_t errors;
103 uint32_t data_len;
104 uint32_t sense_len;
105 uint32_t residual;
106 };
107
108 struct VirtIOBlkConf
109 {
110 BlockConf conf;
111 IOThread *iothread;
112 char *serial;
113 uint32_t scsi;
114 uint32_t config_wce;
115 uint32_t data_plane;
116 };
117
118 struct VirtIOBlockDataPlane;
119
120 typedef struct VirtIOBlock {
121 VirtIODevice parent_obj;
122 BlockDriverState *bs;
123 VirtQueue *vq;
124 void *rq;
125 QEMUBH *bh;
126 BlockConf *conf;
127 VirtIOBlkConf blk;
128 unsigned short sector_mask;
129 bool original_wce;
130 VMChangeStateEntry *change;
131 #ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
132 Notifier migration_state_notifier;
133 struct VirtIOBlockDataPlane *dataplane;
134 #endif
135 } VirtIOBlock;
136
137 typedef struct VirtIOBlockReq {
138 VirtIOBlock *dev;
139 VirtQueueElement elem;
140 struct virtio_blk_inhdr *in;
141 struct virtio_blk_outhdr *out;
142 QEMUIOVector qiov;
143 struct VirtIOBlockReq *next;
144 BlockAcctCookie acct;
145 } VirtIOBlockReq;
146
147 #define DEFINE_VIRTIO_BLK_FEATURES(_state, _field) \
148 DEFINE_VIRTIO_COMMON_FEATURES(_state, _field)
149
150 #ifdef __linux__
151 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field) \
152 DEFINE_BLOCK_PROPERTIES(_state, _field.conf), \
153 DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf), \
154 DEFINE_PROP_STRING("serial", _state, _field.serial), \
155 DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true), \
156 DEFINE_PROP_BIT("scsi", _state, _field.scsi, 0, true), \
157 DEFINE_PROP_IOTHREAD("x-iothread", _state, _field.iothread)
158 #else
159 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field) \
160 DEFINE_BLOCK_PROPERTIES(_state, _field.conf), \
161 DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf), \
162 DEFINE_PROP_STRING("serial", _state, _field.serial), \
163 DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true), \
164 DEFINE_PROP_IOTHREAD("x-iothread", _state, _field.iothread)
165 #endif /* __linux__ */
166
167 void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk);
168
169 int virtio_blk_handle_scsi_req(VirtIOBlock *blk,
170 VirtQueueElement *elem);
171
172 #endif