4 # This file and its contents are supplied under the terms of the
5 # Common Development and Distribution License ("CDDL"), version 1.0.
6 # You may only use this file in accordance with the terms of version
9 # A full copy of the text of the CDDL should have accompanied this
10 # source. A copy of the CDDL is also available via the Internet at
11 # http://www.illumos.org/license/CDDL.
15 # Copyright (c) 2016 by Delphix. All rights reserved.
18 .
$STF_SUITE/tests
/functional
/cli_root
/zpool_import
/zpool_import.kshlib
22 # A pool should be importable using an outdated cachefile that is unaware
23 # of a zpool replace operation at different stages in time.
26 # 1. Create a pool with some devices and an alternate cachefile.
27 # 2. Backup the cachefile.
28 # 3. Initiate device replacement, backup cachefile again and export pool.
29 # Special care must be taken so that resilvering doesn't complete
30 # before we exported the pool.
31 # 4. Verify that we can import the pool using the first cachefile backup.
32 # (Test 1. cachefile: pre-replace, pool: resilvering)
33 # 5. Wait for the resilvering to finish and export the pool.
34 # 6. Verify that we can import the pool using the first cachefile backup.
35 # (Test 2. cachefile: pre-replace, pool: post-replace)
37 # 8. Verify that we can import the pool using the second cachefile backup.
38 # (Test 3. cachefile: resilvering, pool: post-replace)
40 # STRATEGY TO SLOW DOWN RESILVERING:
41 # 1. Reduce zfs_txg_timeout, which controls how long can we resilver for
44 # 3. Re-import the pool so that data isn't cached
45 # 4. Use zinject to slow down device I/O
46 # 5. Trigger the resilvering
47 # 6. Use spa freeze to stop writing to the pool.
48 # 7. Clear zinject events (needed to export the pool)
52 verify_runnable
"global"
56 function custom_cleanup
58 # Revert zfs_txg_timeout to defaults
59 [[ -n ZFS_TXG_TIMEOUT
]] &&
60 log_must set_zfs_txg_timeout
$ZFS_TXG_TIMEOUT
66 log_onexit custom_cleanup
68 function test_replacing_vdevs
70 typeset poolcreate
="$1"
71 typeset replacevdev
="$2"
72 typeset replaceby
="$3"
73 typeset poolfinalstate
="$4"
74 typeset zinjectdevices
="$5"
75 typeset earlyremove
="$6"
76 typeset writedata
="$7"
78 log_note
"$0: pool '$poolcreate', replace $replacevdev by $replaceby."
80 log_must zpool create
-o cachefile
=$CPATH $TESTPOOL1 $poolcreate
82 # Cachefile: pool in pre-replace state
83 log_must
cp $CPATH $CPATHBKP
85 # Steps to insure resilvering happens very slowly.
86 log_must write_some_data
$TESTPOOL1 $writedata
87 log_must zpool
export $TESTPOOL1
88 log_must
cp $CPATHBKP $CPATH
89 log_must zpool import
-c $CPATH -o cachefile
=$CPATH $TESTPOOL1
91 for device
in $zinjectdevices ; do
92 log_must zinject
-d $device -D 200:1 $TESTPOOL1 > /dev
/null
94 log_must zpool replace
$TESTPOOL1 $replacevdev $replaceby
96 # Cachefile: pool in resilvering state
97 log_must
cp $CPATH $CPATHBKP2
99 # We must disable zinject in order to export the pool, so we freeze
100 # it first to prevent writing out subsequent resilvering progress.
101 log_must zpool freeze
$TESTPOOL1
102 # Confirm pool is still replacing
103 log_must pool_is_replacing
$TESTPOOL1
104 log_must zinject
-c all
> /dev
/null
105 log_must zpool
export $TESTPOOL1
107 ( $earlyremove ) && log_must
rm $replacevdev
109 ############################################################
110 # Test 1. Cachefile: pre-replace, pool: resilvering
111 ############################################################
112 log_must
cp $CPATHBKP $CPATH
113 log_must zpool import
-c $CPATH $TESTPOOL1
115 # Wait for resilvering to finish
116 log_must wait_for_pool_config
$TESTPOOL1 "$poolfinalstate"
117 log_must zpool
export $TESTPOOL1
119 ( ! $earlyremove ) && log_must
rm $replacevdev
121 ############################################################
122 # Test 2. Cachefile: pre-replace, pool: post-replace
123 ############################################################
124 log_must zpool import
-c $CPATHBKP $TESTPOOL1
125 log_must check_pool_config
$TESTPOOL1 "$poolfinalstate"
126 log_must zpool
export $TESTPOOL1
128 ############################################################
129 # Test 3. Cachefile: resilvering, pool: post-replace
130 ############################################################
131 log_must zpool import
-c $CPATHBKP2 $TESTPOOL1
132 log_must check_pool_config
$TESTPOOL1 "$poolfinalstate"
135 log_must zpool destroy
$TESTPOOL1
136 log_must
rm -f $CPATH $CPATHBKP $CPATHBKP2
137 log_must mkfile
$FILE_SIZE $replacevdev
142 # We set zfs_txg_timeout to 1 to reduce resilvering time at each sync.
143 ZFS_TXG_TIMEOUT
=$
(get_zfs_txg_timeout
)
144 set_zfs_txg_timeout
1
146 test_replacing_vdevs
"$VDEV0 $VDEV1" \
152 test_replacing_vdevs
"mirror $VDEV0 $VDEV1" \
154 "mirror $VDEV0 $VDEV2" \
158 test_replacing_vdevs
"raidz $VDEV0 $VDEV1 $VDEV2" \
160 "raidz $VDEV0 $VDEV3 $VDEV2" \
161 "$VDEV0 $VDEV1 $VDEV2" \
164 set_zfs_txg_timeout
$ZFS_TXG_TIMEOUT
166 log_pass
"zpool import -c cachefile_unaware_of_replace passed."