CISCO-EIGRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Gauge32, Counter32, Counter64 FROM SNMPv2-SMI TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI InterfaceIndexOrZero, ifIndex FROM IF-MIB InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB; ciscoEigrpMIB MODULE-IDENTITY LAST-UPDATED "200411160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-eigrp@cisco.com" DESCRIPTION "Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusing Update Algorithm (DUAL), which is a method of finding loop-free paths through a network. Directly connected routers running EIGRP form neighbor adjacencies in order to propagate best-path and alternate-path routing information for configured and learned routes. The tables defined within the MIB are closely aligned with how the router command-line interface for EIGRP displays information on EIGRP configurations, i.e., the topology table contains objects associated with the EIGRP topology commands, and the peer table contains objects associated withe EIGRP neighbor commands, etc. There are five main tables within this mib: EIGRP VPN table Contains information regarding which virtual private networks (VPN) are configured with EIGRP. EIGRP traffic statistics table Contains counter & statistcs regarding specific types of EIGRP packets sent and related collective information per VPN and per autonomous system (AS). EIGRP topology table Contains information regarding EIGRP routes received in updates and originated locally. EIGRP sends and receives routing updates from adjacent routers running EIGRP with which it formed a peer relationship. EIGRP peer (neighbor) table Contains information about neighbor EIGRP routers with which peer adjacencies have been established. EIGRP uses a Hello protocol to form neighbor relationships with directly connected routers also running EIGRP. EIGRP interfaces table Contains information and statistics on each of the interfaces on the router over which EIGRP has been configured to run." REVISION "200411160000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 449 } -- -- Textual Conventions -- EigrpUpTimeString ::= TEXTUAL-CONVENTION DISPLAY-HINT "8a" STATUS current DESCRIPTION "Specifies a timer value in days, hours, minutes, and seconds in ASCII format. If the up time is less than 24 hours, the number of days will not be reflected and the string will be formatted like this: 'hh:mm:ss', reflecting hours, minutes, and seconds. If the up time is greater than 24 hours, EIGRP is less precise and the minutes and seconds are not reflected. Instead only the days and hours are shown and the string will be formatted like this: 'xxxdxxh'." SYNTAX OCTET STRING (SIZE (0..8)) EigrpVersionString ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d.1d/1d.1d" STATUS current DESCRIPTION "Specifies an ASCII string representing the IOS major and minor version followed by the EIGRP major and minor version." SYNTAX OCTET STRING (SIZE (0..9)) -- -- Objects -- cEigrpMIBNotifications OBJECT IDENTIFIER ::= { ciscoEigrpMIB 0 } cEigrpMIBObjects OBJECT IDENTIFIER ::= { ciscoEigrpMIB 1 } cEigrpMIBConformance OBJECT IDENTIFIER ::= { ciscoEigrpMIB 2 } cEigrpVpnInfo OBJECT IDENTIFIER ::= { cEigrpMIBObjects 1 } cEigrpAsInfo OBJECT IDENTIFIER ::= { cEigrpMIBObjects 2 } cEigrpTopologyInfo OBJECT IDENTIFIER ::= { cEigrpMIBObjects 3 } cEigrpPeerInfo OBJECT IDENTIFIER ::= { cEigrpMIBObjects 4 } cEigrpInterfaceInfo OBJECT IDENTIFIER ::= { cEigrpMIBObjects 5 } -- EIGRP VPN Base Table definition cEigrpVpnTable OBJECT-TYPE SYNTAX SEQUENCE OF CEigrpVpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on those VPN's configured to run EIGRP. The VPN creation on a router is independent of the routing protocol to be used over it. A VPN is given a name and has a dedicated routing table associated with it. This routing table is identified internally by a unique integer value." ::= { cEigrpVpnInfo 1 } cEigrpVpnEntry OBJECT-TYPE SYNTAX CEigrpVpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information relating to a single VPN which is configured to run EIGRP." INDEX { cEigrpVpnId } ::= { cEigrpVpnTable 1 } CEigrpVpnEntry ::= SEQUENCE { cEigrpVpnId Unsigned32, cEigrpVpnName SnmpAdminString } cEigrpVpnId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique VPN identifier. This is a unique integer relative to all other VPN's defined on the router. It also identifies internally the routing table instance." ::= { cEigrpVpnEntry 1 } cEigrpVpnName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name given to the VPN." ::= { cEigrpVpnEntry 2 } -- EIGRP Traffic Stats table definition cEigrpTraffStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CEigrpTraffStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of EIGRP traffic statistics and information associated with all EIGRP autonomous systems." ::= { cEigrpAsInfo 1 } cEigrpTraffStatsEntry OBJECT-TYPE SYNTAX CEigrpTraffStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The set of statistics and information for a single EIGRP Autonomous System." INDEX { cEigrpVpnId, cEigrpAsNumber } ::= { cEigrpTraffStatsTable 1 } CEigrpTraffStatsEntry ::= SEQUENCE { cEigrpAsNumber Unsigned32, cEigrpNbrCount Unsigned32, cEigrpHellosSent Counter32, cEigrpHellosRcvd Counter32, cEigrpUpdatesSent Counter32, cEigrpUpdatesRcvd Counter32, cEigrpQueriesSent Counter32, cEigrpQueriesRcvd Counter32, cEigrpRepliesSent Counter32, cEigrpRepliesRcvd Counter32, cEigrpAcksSent Counter32, cEigrpAcksRcvd Counter32, cEigrpInputQHighMark Unsigned32, cEigrpInputQDrops Counter32, cEigrpSiaQueriesSent Counter32, cEigrpSiaQueriesRcvd Counter32, cEigrpAsRouterIdType InetAddressType, cEigrpAsRouterId InetAddress, cEigrpTopoRoutes Counter32, cEigrpHeadSerial Counter64, cEigrpNextSerial Counter64, cEigrpXmitPendReplies Unsigned32, cEigrpXmitDummies Unsigned32 } cEigrpAsNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Autonomous System number which is unique integer per VPN." ::= { cEigrpTraffStatsEntry 1 } cEigrpNbrCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of live EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured in the EIGRP AS." ::= { cEigrpTraffStatsEntry 2 } cEigrpHellosSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number Hello packets that have been sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 3 } cEigrpHellosRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number Hello packets that have been received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 4 } cEigrpUpdatesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number routing update packets that have been sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 5 } cEigrpUpdatesRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number routing update packets that have been received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 6 } cEigrpQueriesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number alternate route query packets that have been sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 7 } cEigrpQueriesRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number alternate route query packets that have been received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 8 } cEigrpRepliesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number query reply packets that have been sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 9 } cEigrpRepliesRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number query reply packets that have been received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 10 } cEigrpAcksSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number packet acknowledgements that have been sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 11 } cEigrpAcksRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number packet acknowledgements that have been received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 12 } cEigrpInputQHighMark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of EIGRP packets in the input queue waiting to be processed internally addressed to this AS." ::= { cEigrpTraffStatsEntry 13 } cEigrpInputQDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EIGRP packets dropped from the input queue due to it being full within the AS." ::= { cEigrpTraffStatsEntry 14 } cEigrpSiaQueriesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Stuck-In-Active (SIA) query packets sent to all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 15 } cEigrpSiaQueriesRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Stuck-In-Active (SIA) query packets received from all EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured for the EIGRP AS." ::= { cEigrpTraffStatsEntry 16 } cEigrpAsRouterIdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The format of the router-id configured or automatically selected for the EIGRP AS." ::= { cEigrpTraffStatsEntry 17 } cEigrpAsRouterId OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router-id configured or automatically selected for the EIGRP AS. Each EIGRP routing process has a unique router-id selected from each autonomous system configured. The format is governed by object cEigrpAsRouterIdType." ::= { cEigrpTraffStatsEntry 18 } cEigrpTopoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EIGRP derived routes currently existing in the topology table for the AS." ::= { cEigrpTraffStatsEntry 19 } cEigrpHeadSerial OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Routes in a topology table for an AS are assigned serial numbers and are sequenced internally as they are inserted and deleted. The serial number of the first route in that internal sequence is called the head serial number. Each AS has its own topology table, and its own serial number space, each of which begins with the value 1. A serial number of zero implies that there are no routes in the topology." ::= { cEigrpTraffStatsEntry 20 } cEigrpNextSerial OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number that would be assigned to the next new or changed route in the topology table for the AS." ::= { cEigrpTraffStatsEntry 21 } cEigrpXmitPendReplies OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When alternate route query packets are sent to adjacent EIGRP peers in an AS, replies are expected. This object is the total number of outstanding replies expected to queries that have been sent to peers in the current AS. It remains at zero most of the time until an EIGRP route becomes active." ::= { cEigrpTraffStatsEntry 22 } cEigrpXmitDummies OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy is a temporary internal entity used as a place holder in the topology table for an AS. They are not transmitted in routing updates. This is the total number currently in existence associated with the AS." ::= { cEigrpTraffStatsEntry 23 } -- EIGRP topology table definition cEigrpTopoTable OBJECT-TYPE SYNTAX SEQUENCE OF CEigrpTopoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of EIGRP routes and their associated attributes for an Autonomous System (AS) configured in a VPN is called a topology table. All route entries in the topology table will be indexed by IP network type, IP network number and network mask (prefix) size." ::= { cEigrpTopologyInfo 1 } cEigrpTopoEntry OBJECT-TYPE SYNTAX CEigrpTopoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry for a single EIGRP topology table in the given AS." INDEX { cEigrpVpnId, cEigrpAsNumber, cEigrpDestNetType, cEigrpDestNet, cEigrpDestNetPrefixLen } ::= { cEigrpTopoTable 1 } CEigrpTopoEntry ::= SEQUENCE { cEigrpDestNetType InetAddressType, cEigrpDestNet InetAddress, cEigrpDestNetPrefixLen InetAddressPrefixLength, cEigrpActive TruthValue, cEigrpStuckInActive TruthValue, cEigrpDestSuccessors Unsigned32, cEigrpFdistance Unsigned32, cEigrpRouteOriginType SnmpAdminString, cEigrpRouteOriginAddrType InetAddressType, cEigrpRouteOriginAddr InetAddress, cEigrpNextHopAddressType InetAddressType, cEigrpNextHopAddress InetAddress, cEigrpNextHopInterface SnmpAdminString, cEigrpDistance Unsigned32, cEigrpReportDistance Unsigned32 } cEigrpDestNetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The format of the destination IP network number for a single route in the topology table in the AS specified in cEigrpDestNet." ::= { cEigrpTopoEntry 1 } cEigrpDestNet OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP network number for a single route in the topology table in the AS. The format is governed by object cEigrpDestNetType." ::= { cEigrpTopoEntry 2 } cEigrpDestNetPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length associated with the destination IP network address for a single route in the topology table in the AS. The format is governed by the object cEigrpDestNetType." ::= { cEigrpTopoEntry 4 } cEigrpActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A value of true(1) indicates the route to the destination network has failed and an active (query) search for an alternative path is in progress. A value of false(2) indicates the route is stable (passive)." ::= { cEigrpTopoEntry 5 } cEigrpStuckInActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A value of true(1) indicates that that this route which is in active state (cEigrpActive = true(1)) has not received any replies to queries for alternate paths, and a second EIGRP route query, called a stuck-in-active query, has now been sent." ::= { cEigrpTopoEntry 6 } cEigrpDestSuccessors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A successor is the next routing hop for a path to the destination IP network number for a single route in the topology table in the AS. There can be several potential successors if there are multiple paths to the destination. This is the total number of successors for a topology entry." ::= { cEigrpTopoEntry 7 } cEigrpFdistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The feasibility (best) distance is the minimum distance from this router to the destination IP network in this topology entry. The feasibility distance is used in determining the best successor for a path to the destination network." ::= { cEigrpTopoEntry 8 } cEigrpRouteOriginType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a text string describing the internal origin of the EIGRP route represented by the topology entry." ::= { cEigrpTopoEntry 9 } cEigrpRouteOriginAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The format of the IP address defined as the origin of this topology route entry." ::= { cEigrpTopoEntry 10 } cEigrpRouteOriginAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "If the origin of the topology route entry is external to this router, then this object is the IP address of the router from which it originated. The format is governed by object cEigrpRouteOriginAddrType." ::= { cEigrpTopoEntry 11 } cEigrpNextHopAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The format of the next hop IP address for the route represented by the topology entry." ::= { cEigrpTopoEntry 12 } cEigrpNextHopAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is the next hop IP address for the route represented by the topology entry. The next hop is where network traffic will be routed to in order to reach the destination network for this topology entry. The format is governed by cEigrpNextHopAddressType." ::= { cEigrpTopoEntry 13 } cEigrpNextHopInterface OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The interface through which the next hop IP address is reached to send network traffic to the destination network represented by the topology entry." ::= { cEigrpTopoEntry 14 } cEigrpDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The computed distance to the destination network entry from this router." ::= { cEigrpTopoEntry 15 } cEigrpReportDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The computed distance to the destination network in the topology entry reported to this router by the originator of this route." ::= { cEigrpTopoEntry 16 } -- EIGRP Peer table per VPN and AS (expansion table) cEigrpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF CEigrpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of established EIGRP peers (neighbors) in the selected autonomous system. Peers are indexed by their unique internal handle id, as well as the AS number and VPN id. The peer entry is removed from the table if the peer is declared down." ::= { cEigrpPeerInfo 1 } cEigrpPeerEntry OBJECT-TYPE SYNTAX CEigrpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics and operational parameters for a single peer in the AS." INDEX { cEigrpVpnId, cEigrpAsNumber, cEigrpHandle } ::= { cEigrpPeerTable 1 } CEigrpPeerEntry ::= SEQUENCE { cEigrpHandle Unsigned32, cEigrpPeerAddrType InetAddressType, cEigrpPeerAddr InetAddress, cEigrpPeerIfIndex InterfaceIndexOrZero, cEigrpHoldTime Unsigned32, cEigrpUpTime EigrpUpTimeString, cEigrpSrtt Unsigned32, cEigrpRto Unsigned32, cEigrpPktsEnqueued Unsigned32, cEigrpLastSeq Unsigned32, cEigrpVersion EigrpVersionString, cEigrpRetrans Counter32, cEigrpRetries Unsigned32 } cEigrpHandle OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique internal identifier for the peer in the AS. This is a unique value among peer entries in a selected table." ::= { cEigrpPeerEntry 1 } cEigrpPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The format of the remote source IP address used by the peer to establish the EIGRP adjacency with this router." ::= { cEigrpPeerEntry 2 } cEigrpPeerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source IP address used by the peer to establish the EIGRP adjacency with this router. The format is governed by object cEigrpPeerAddrType." ::= { cEigrpPeerEntry 3 } cEigrpPeerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the interface on this router through which this peer can be reached." ::= { cEigrpPeerEntry 4 } cEigrpHoldTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count-down timer indicating how much time must pass without receiving a hello packet from this EIGRP peer before this router declares the peer down. A peer declared as down is removed from the table and is no longer visible." ::= { cEigrpPeerEntry 5 } cEigrpUpTime OBJECT-TYPE SYNTAX EigrpUpTimeString MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time since the EIGRP adjacency was first established with the peer." ::= { cEigrpPeerEntry 6 } cEigrpSrtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The computed smooth round trip time for packets to and from the peer." ::= { cEigrpPeerEntry 7 } cEigrpRto OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The computed retransmission timeout for the peer. This value is computed over time as packets are sent to the peer and acknowledgements are received from it, and is the amount of time to wait before resending a packet from the retransmission queue to the peer when an expected acknowledgement has not been received." ::= { cEigrpPeerEntry 8 } cEigrpPktsEnqueued OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of any EIGRP packets currently enqueued waiting to be sent to this peer." ::= { cEigrpPeerEntry 9 } cEigrpLastSeq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "All transmitted EIGRP packets have a sequence number assigned. This is the sequence number of the last EIGRP packet sent to this peer." ::= { cEigrpPeerEntry 10 } cEigrpVersion OBJECT-TYPE SYNTAX EigrpVersionString MAX-ACCESS read-only STATUS current DESCRIPTION "The EIGRP version information reported by the remote peer." ::= { cEigrpPeerEntry 11 } cEigrpRetrans OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of retransmissions to this peer during the period that the peer adjacency has remained up." ::= { cEigrpPeerEntry 12 } cEigrpRetries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the current unacknowledged packet has been retried, i.e. resent to this peer to be acknowledged." ::= { cEigrpPeerEntry 13 } -- EIGRP Interfaces table per VPN and AS cEigrpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CEigrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of interfaces over which EIGRP is running, and their associated statistics. This table is independent of whether any peer adjacencies have been formed over the interfaces or not. Interfaces running EIGRP are determined by whether their assigned IP addresses fall within configured EIGRP network statements." ::= { cEigrpInterfaceInfo 1 } cEigrpInterfaceEntry OBJECT-TYPE SYNTAX CEigrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information for a single interface running EIGRP in the AS and VPN." INDEX { cEigrpVpnId, cEigrpAsNumber, ifIndex } ::= { cEigrpInterfaceTable 1 } CEigrpInterfaceEntry ::= SEQUENCE { cEigrpPeerCount Gauge32, cEigrpXmitReliableQ Gauge32, cEigrpXmitUnreliableQ Gauge32, cEigrpMeanSrtt Unsigned32, cEigrpPacingReliable Unsigned32, cEigrpPacingUnreliable Unsigned32, cEigrpMFlowTimer Unsigned32, cEigrpPendingRoutes Gauge32, cEigrpHelloInterval Unsigned32, cEigrpXmitNextSerial Counter64, cEigrpUMcasts Counter32, cEigrpRMcasts Counter32, cEigrpUUcasts Counter32, cEigrpRUcasts Counter32, cEigrpMcastExcepts Counter32, cEigrpCRpkts Counter32, cEigrpAcksSuppressed Counter32, cEigrpRetransSent Counter32, cEigrpOOSrcvd Counter32, cEigrpAuthMode INTEGER, cEigrpAuthKeyChain SnmpAdminString } cEigrpPeerCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EIGRP adjacencies currently formed with peers reached through this interface." ::= { cEigrpInterfaceEntry 3 } cEigrpXmitReliableQ OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EIGRP packets currently waiting in the reliable transport (acknowledgement-required) transmission queue to be sent to a peer." ::= { cEigrpInterfaceEntry 4 } cEigrpXmitUnreliableQ OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number EIGRP of packets currently waiting in the unreliable transport (no acknowledgement required) transmission queue." ::= { cEigrpInterfaceEntry 5 } cEigrpMeanSrtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average of all the computed smooth round trip time values for a packet to and from all peers established on this interface." ::= { cEigrpInterfaceEntry 6 } cEigrpPacingReliable OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured time interval between EIGRP packet transmissions on the interface when the reliable transport method is used." ::= { cEigrpInterfaceEntry 7 } cEigrpPacingUnreliable OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured time interval between EIGRP packet transmissions on the interface when the unreliable transport method is used." ::= { cEigrpInterfaceEntry 8 } cEigrpMFlowTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured multicast flow control timer value for this interface." ::= { cEigrpInterfaceEntry 9 } cEigrpPendingRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of queued EIGRP routing updates awaiting transmission on this interface." ::= { cEigrpInterfaceEntry 10 } cEigrpHelloInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The configured time interval between Hello packet transmissions for this interface." ::= { cEigrpInterfaceEntry 11 } cEigrpXmitNextSerial OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the next EIGRP packet that is to be queued for transmission on this interface." ::= { cEigrpInterfaceEntry 12 } cEigrpUMcasts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unreliable (no acknowledgement required) EIGRP multicast packets sent on this interface." ::= { cEigrpInterfaceEntry 13 } cEigrpRMcasts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of reliable (acknowledgement required) EIGRP multicast packets sent on this interface." ::= { cEigrpInterfaceEntry 14 } cEigrpUUcasts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unreliable (no acknowledgement required) EIGRP unicast packets sent on this interface." ::= { cEigrpInterfaceEntry 15 } cEigrpRUcasts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of reliable (acknowledgement required) unicast packets sent on this interface." ::= { cEigrpInterfaceEntry 16 } cEigrpMcastExcepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EIGRP multicast exception transmissions that have occurred on this interface." ::= { cEigrpInterfaceEntry 17 } cEigrpCRpkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number EIGRP Conditional-Receive packets sent on this interface." ::= { cEigrpInterfaceEntry 18 } cEigrpAcksSuppressed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of individual EIGRP acknowledgement packets that have been suppressed and combined in an already enqueued outbound reliable packet on this interface." ::= { cEigrpInterfaceEntry 19 } cEigrpRetransSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number EIGRP packet retransmissions sent on the interface." ::= { cEigrpInterfaceEntry 20 } cEigrpOOSrcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out-of-sequence EIGRP packets received." ::= { cEigrpInterfaceEntry 21 } cEigrpAuthMode OBJECT-TYPE SYNTAX INTEGER { none(1), md5(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The EIGRP authentication mode of the interface. none : no authentication enabled on the interface md5 : MD5 authentication enabled on the interface" ::= { cEigrpInterfaceEntry 22 } cEigrpAuthKeyChain OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the authentication key-chain configured on this interface. The key-chain is a reference to which set of secret keys are to be accessed in order to determine which secret key string to use. The key chain name is not the secret key string password and can also be used in other routing protocols, such as RIP and ISIS." ::= { cEigrpInterfaceEntry 23 } -- Notifications cEigrpAuthFailureEvent NOTIFICATION-TYPE OBJECTS { cEigrpPeerAddrType, cEigrpPeerAddr } STATUS current DESCRIPTION "This notification is sent when EIGRP MD5 authentication is enabled on any interface and peer adjacencies are formed, and any adjacencies go down as a result of an authentication failure." ::= { cEigrpMIBNotifications 1 } cEigrpRouteStuckInActive NOTIFICATION-TYPE OBJECTS { cEigrpPeerAddrType, cEigrpPeerAddr, cEigrpStuckInActive } STATUS current DESCRIPTION "This notification is sent when a route in the topology table is stuck in an active state. During the query phase for a new route to a destination network, a route is described as being in the active state if when an alternate path is actively being sought, no replies are received to normal queries or stuck-in-active queries." ::= { cEigrpMIBNotifications 2 } -- Conformance cEigrpMIBCompliances OBJECT IDENTIFIER ::= { cEigrpMIBConformance 1 } cEigrpMIBGroups OBJECT IDENTIFIER ::= { cEigrpMIBConformance 2 } -- Compliance cEigrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco EIGRP Management MIB." MODULE MANDATORY-GROUPS { cEigrpVpnDataGroup, cEigrpTrafficStatsGroup, cEigrpInterfaceDataGroup, cEigrpPeerDataGroup, cEigrpTopoDataGroup, cEigrpNotificationsGroup } OBJECT cEigrpAsRouterIdType SYNTAX INTEGER { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 address type." OBJECT cEigrpRouteOriginAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 address type." OBJECT cEigrpNextHopAddressType SYNTAX INTEGER { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 address type." OBJECT cEigrpPeerAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 address type." ::= { cEigrpMIBCompliances 1 } -- Units of Conformance cEigrpVpnDataGroup OBJECT-GROUP OBJECTS { cEigrpVpnName } STATUS current DESCRIPTION "The collection of VPN names which have been configured with one or more EIGRP autonmous systems." ::= { cEigrpMIBGroups 1 } cEigrpTrafficStatsGroup OBJECT-GROUP OBJECTS { cEigrpHellosSent, cEigrpHellosRcvd, cEigrpUpdatesSent, cEigrpUpdatesRcvd, cEigrpQueriesSent, cEigrpQueriesRcvd, cEigrpRepliesSent, cEigrpRepliesRcvd, cEigrpAcksSent, cEigrpAcksRcvd, cEigrpInputQHighMark, cEigrpInputQDrops, cEigrpSiaQueriesSent, cEigrpSiaQueriesRcvd } STATUS current DESCRIPTION "A collection of objects providing management information regarding collective EIGRP packet statistics for all EIGRP autonomous systems configured." ::= { cEigrpMIBGroups 2 } cEigrpInterfaceDataGroup OBJECT-GROUP OBJECTS { cEigrpPeerCount, cEigrpXmitReliableQ, cEigrpXmitUnreliableQ, cEigrpMeanSrtt, cEigrpPacingReliable, cEigrpPacingUnreliable, cEigrpMFlowTimer, cEigrpPendingRoutes, cEigrpHelloInterval, cEigrpXmitNextSerial, cEigrpUMcasts, cEigrpRMcasts, cEigrpUUcasts, cEigrpRUcasts, cEigrpMcastExcepts, cEigrpCRpkts, cEigrpAcksSuppressed, cEigrpRetransSent, cEigrpOOSrcvd, cEigrpAuthMode, cEigrpAuthKeyChain } STATUS current DESCRIPTION "A collection of objects providing management information for interfaces over which EIGRP is configured and running." ::= { cEigrpMIBGroups 3 } cEigrpPeerDataGroup OBJECT-GROUP OBJECTS { cEigrpNbrCount, cEigrpPeerAddrType, cEigrpPeerAddr, cEigrpPeerIfIndex, cEigrpHoldTime, cEigrpUpTime, cEigrpSrtt, cEigrpRto, cEigrpPktsEnqueued, cEigrpLastSeq, cEigrpVersion, cEigrpRetrans, cEigrpRetries } STATUS current DESCRIPTION "A collection of objects providing management information for EIGRP peer adjacencies formed in the EIGRP autonoumous systems." ::= { cEigrpMIBGroups 4 } cEigrpTopoDataGroup OBJECT-GROUP OBJECTS { cEigrpAsRouterId, cEigrpAsRouterIdType, cEigrpTopoRoutes, cEigrpHeadSerial, cEigrpNextSerial, cEigrpXmitPendReplies, cEigrpXmitDummies, cEigrpActive, cEigrpStuckInActive, cEigrpDestSuccessors, cEigrpFdistance, cEigrpRouteOriginType, cEigrpRouteOriginAddrType, cEigrpRouteOriginAddr, cEigrpNextHopAddressType, cEigrpNextHopAddress, cEigrpNextHopInterface, cEigrpDistance, cEigrpReportDistance } STATUS current DESCRIPTION "A collection of objects providing management information for EIGRP topology routes derived within autonomous systems and received in updates from EIGRP neighbors." ::= { cEigrpMIBGroups 5 } cEigrpNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { cEigrpAuthFailureEvent, cEigrpRouteStuckInActive } STATUS current DESCRIPTION "Group of notifications on EIGRP routers." ::= { cEigrpMIBGroups 6 } END