# # vlan-aware bridge with clag example # # # 'bridge' is a vlan aware bridge with ports: # 'peer-bond spine-bond glob host-bond-0[1-2]' # # All ports inherit 'vlans 10 20-23' from the 'bridge-vids' attribute # under the bridge # # native vlan is by default 1 # # 'bridge-vids' attribute is used to declare vlans. # 'bridge-pvid' attribute is used to specify native vlans if other than 1 # 'bridge-access' attribute is used to declare access port # # 'spine-bond host-bond-0[1-2]' are clag bonds and will be considered by # clagd for dual connection. clag-id has to be a non-zero and has to match # across the peer switches for the bonds to become dual connected. # spine bond # auto spine-bond iface spine-bond bond-slaves glob swp19-22 bond-mode 802.3ad bond-miimon 100 bond-use-carrier 1 bond-lacp-rate 1 bond-min-links 1 bond-xmit-hash-policy layer3+4 clag-id 100 # mlag bond and peer interface # auto peer-bond iface peer-bond bond-slaves glob swp23-24 bond-mode 802.3ad bond-miimon 100 bond-use-carrier 1 bond-lacp-rate 1 bond-min-links 1 bond-xmit-hash-policy layer3+4 # sub-interface for clagd communication # auto peer-bond.4094 iface peer-bond.4094 address 169.254.0.1/30 clagd-peer-ip 169.254.0.2 clagd-sys-mac 44:38:39:ff:00:01 #clagd-priority 4096 # Please see man clagd for more options # clagd-args --peerTimeout 30 # host ports # auto host-bond-01 iface host-bond-01 bond-slaves swp1 bond-mode 802.3ad bond-miimon 100 bond-use-carrier 1 bond-lacp-rate 1 bond-min-links 1 bond-xmit-hash-policy layer3+4 clag-id 1 auto host-bond-02 iface host-bond-02 bond-slaves swp2 bond-mode 802.3ad bond-miimon 100 bond-use-carrier 1 bond-lacp-rate 1 bond-min-links 1 bond-xmit-hash-policy layer3+4 clag-id 2 # the bridge auto bridge iface bridge bridge-vlan-aware yes bridge-ports peer-bond spine-bond glob host-bond-0[1-2] bridge-stp on bridge-vids 10 20-23