#!/bin/ksh -p # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2009 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # # Copyright (c) 2012, 2015 by Delphix. All rights reserved. # . ${STF_TOOLS}/include/logapi.shlib # Determine if this is a Linux test system # # Return 0 if platform Linux, 1 if otherwise function is_linux { if [[ $($UNAME -o) == "GNU/Linux" ]]; then return 0 else return 1 fi } # Determine whether a dataset is mounted # # $1 dataset name # $2 filesystem type; optional - defaulted to zfs # # Return 0 if dataset is mounted; 1 if unmounted; 2 on error function ismounted { typeset fstype=$2 [[ -z $fstype ]] && fstype=zfs typeset out dir name ret case $fstype in zfs) if [[ "$1" == "/"* ]] ; then for out in $($ZFS mount | $AWK '{print $2}'); do [[ $1 == $out ]] && return 0 done else for out in $($ZFS mount | $AWK '{print $1}'); do [[ $1 == $out ]] && return 0 done fi ;; ufs|nfs) out=$($DF -F $fstype $1 2>/dev/null) ret=$? (($ret != 0)) && return $ret dir=${out%%\(*} dir=${dir%% *} name=${out##*\(} name=${name%%\)*} name=${name%% *} [[ "$1" == "$dir" || "$1" == "$name" ]] && return 0 ;; ext2) out=$($DF -t $fstype $1 2>/dev/null) return $? ;; zvol) if [[ -L "$ZVOL_DEVDIR/$1" ]]; then link=$(readlink -f $ZVOL_DEVDIR/$1) [[ -n "$link" ]] && \ $MOUNT | $GREP -q "^$link" && \ return 0 fi ;; esac return 1 } # Return 0 if a dataset is mounted; 1 otherwise # # $1 dataset name # $2 filesystem type; optional - defaulted to zfs function mounted { ismounted $1 $2 (($? == 0)) && return 0 return 1 } # Return 0 if a dataset is unmounted; 1 otherwise # # $1 dataset name # $2 filesystem type; optional - defaulted to zfs function unmounted { ismounted $1 $2 (($? == 1)) && return 0 return 1 } # split line on "," # # $1 - line to split function splitline { $ECHO $1 | $SED "s/,/ /g" } function default_setup { default_setup_noexit "$@" log_pass } # # Given a list of disks, setup storage pools and datasets. # function default_setup_noexit { typeset disklist=$1 typeset container=$2 typeset volume=$3 log_note begin default_setup_noexit if is_global_zone; then if poolexists $TESTPOOL ; then destroy_pool $TESTPOOL fi [[ -d /$TESTPOOL ]] && $RM -rf /$TESTPOOL log_note creating pool $TESTPOOL $disklist log_must $ZPOOL create -f $TESTPOOL $disklist else reexport_pool fi $RM -rf $TESTDIR || log_unresolved Could not remove $TESTDIR $MKDIR -p $TESTDIR || log_unresolved Could not create $TESTDIR log_must $ZFS create $TESTPOOL/$TESTFS log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS if [[ -n $container ]]; then $RM -rf $TESTDIR1 || \ log_unresolved Could not remove $TESTDIR1 $MKDIR -p $TESTDIR1 || \ log_unresolved Could not create $TESTDIR1 log_must $ZFS create $TESTPOOL/$TESTCTR log_must $ZFS set canmount=off $TESTPOOL/$TESTCTR log_must $ZFS create $TESTPOOL/$TESTCTR/$TESTFS1 log_must $ZFS set mountpoint=$TESTDIR1 \ $TESTPOOL/$TESTCTR/$TESTFS1 fi if [[ -n $volume ]]; then if is_global_zone ; then log_must $ZFS create -V $VOLSIZE $TESTPOOL/$TESTVOL block_device_wait else log_must $ZFS create $TESTPOOL/$TESTVOL fi fi } # # Given a list of disks, setup a storage pool, file system and # a container. # function default_container_setup { typeset disklist=$1 default_setup "$disklist" "true" } # # Given a list of disks, setup a storage pool,file system # and a volume. # function default_volume_setup { typeset disklist=$1 default_setup "$disklist" "" "true" } # # Given a list of disks, setup a storage pool,file system, # a container and a volume. # function default_container_volume_setup { typeset disklist=$1 default_setup "$disklist" "true" "true" } # # Create a snapshot on a filesystem or volume. Defaultly create a snapshot on # filesystem # # $1 Existing filesystem or volume name. Default, $TESTFS # $2 snapshot name. Default, $TESTSNAP # function create_snapshot { typeset fs_vol=${1:-$TESTFS} typeset snap=${2:-$TESTSNAP} [[ -z $fs_vol ]] && log_fail "Filesystem or volume's name is undefined." [[ -z $snap ]] && log_fail "Snapshot's name is undefined." if snapexists $fs_vol@$snap; then log_fail "$fs_vol@$snap already exists." fi datasetexists $fs_vol || \ log_fail "$fs_vol must exist." log_must $ZFS snapshot $fs_vol@$snap } # # Create a clone from a snapshot, default clone name is $TESTCLONE. # # $1 Existing snapshot, $TESTPOOL/$TESTFS@$TESTSNAP is default. # $2 Clone name, $TESTPOOL/$TESTCLONE is default. # function create_clone # snapshot clone { typeset snap=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} typeset clone=${2:-$TESTPOOL/$TESTCLONE} [[ -z $snap ]] && \ log_fail "Snapshot name is undefined." [[ -z $clone ]] && \ log_fail "Clone name is undefined." log_must $ZFS clone $snap $clone } function default_mirror_setup { default_mirror_setup_noexit $1 $2 $3 log_pass } # # Given a pair of disks, set up a storage pool and dataset for the mirror # @parameters: $1 the primary side of the mirror # $2 the secondary side of the mirror # @uses: ZPOOL ZFS TESTPOOL TESTFS function default_mirror_setup_noexit { readonly func="default_mirror_setup_noexit" typeset primary=$1 typeset secondary=$2 [[ -z $primary ]] && \ log_fail "$func: No parameters passed" [[ -z $secondary ]] && \ log_fail "$func: No secondary partition passed" [[ -d /$TESTPOOL ]] && $RM -rf /$TESTPOOL log_must $ZPOOL create -f $TESTPOOL mirror $@ log_must $ZFS create $TESTPOOL/$TESTFS log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS } # # create a number of mirrors. # We create a number($1) of 2 way mirrors using the pairs of disks named # on the command line. These mirrors are *not* mounted # @parameters: $1 the number of mirrors to create # $... the devices to use to create the mirrors on # @uses: ZPOOL ZFS TESTPOOL function setup_mirrors { typeset -i nmirrors=$1 shift while ((nmirrors > 0)); do log_must test -n "$1" -a -n "$2" [[ -d /$TESTPOOL$nmirrors ]] && $RM -rf /$TESTPOOL$nmirrors log_must $ZPOOL create -f $TESTPOOL$nmirrors mirror $1 $2 shift 2 ((nmirrors = nmirrors - 1)) done } # # create a number of raidz pools. # We create a number($1) of 2 raidz pools using the pairs of disks named # on the command line. These pools are *not* mounted # @parameters: $1 the number of pools to create # $... the devices to use to create the pools on # @uses: ZPOOL ZFS TESTPOOL function setup_raidzs { typeset -i nraidzs=$1 shift while ((nraidzs > 0)); do log_must test -n "$1" -a -n "$2" [[ -d /$TESTPOOL$nraidzs ]] && $RM -rf /$TESTPOOL$nraidzs log_must $ZPOOL create -f $TESTPOOL$nraidzs raidz $1 $2 shift 2 ((nraidzs = nraidzs - 1)) done } # # Destroy the configured testpool mirrors. # the mirrors are of the form ${TESTPOOL}{number} # @uses: ZPOOL ZFS TESTPOOL function destroy_mirrors { default_cleanup_noexit log_pass } # # Given a minimum of two disks, set up a storage pool and dataset for the raid-z # $1 the list of disks # function default_raidz_setup { typeset disklist="$*" disks=(${disklist[*]}) if [[ ${#disks[*]} -lt 2 ]]; then log_fail "A raid-z requires a minimum of two disks." fi [[ -d /$TESTPOOL ]] && $RM -rf /$TESTPOOL log_must $ZPOOL create -f $TESTPOOL raidz $1 $2 $3 log_must $ZFS create $TESTPOOL/$TESTFS log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS log_pass } # # Common function used to cleanup storage pools and datasets. # # Invoked at the start of the test suite to ensure the system # is in a known state, and also at the end of each set of # sub-tests to ensure errors from one set of tests doesn't # impact the execution of the next set. function default_cleanup { default_cleanup_noexit log_pass } function default_cleanup_noexit { typeset exclude="" typeset pool="" # # Destroying the pool will also destroy any # filesystems it contains. # if is_global_zone; then $ZFS unmount -a > /dev/null 2>&1 [[ -z "$KEEP" ]] && KEEP="rpool" exclude=`eval $ECHO \"'(${KEEP})'\"` ALL_POOLS=$($ZPOOL list -H -o name \ | $GREP -v "$NO_POOLS" | $EGREP -v "$exclude") # Here, we loop through the pools we're allowed to # destroy, only destroying them if it's safe to do # so. while [ ! -z ${ALL_POOLS} ] do for pool in ${ALL_POOLS} do if safe_to_destroy_pool $pool ; then destroy_pool $pool fi ALL_POOLS=$($ZPOOL list -H -o name \ | $GREP -v "$NO_POOLS" \ | $EGREP -v "$exclude") done done $ZFS mount -a else typeset fs="" for fs in $($ZFS list -H -o name \ | $GREP "^$ZONE_POOL/$ZONE_CTR[01234]/"); do datasetexists $fs && \ log_must $ZFS destroy -Rf $fs done # Need cleanup here to avoid garbage dir left. for fs in $($ZFS list -H -o name); do [[ $fs == /$ZONE_POOL ]] && continue [[ -d $fs ]] && log_must $RM -rf $fs/* done # # Reset the $ZONE_POOL/$ZONE_CTR[01234] file systems property to # the default value # for fs in $($ZFS list -H -o name); do if [[ $fs == $ZONE_POOL/$ZONE_CTR[01234] ]]; then log_must $ZFS set reservation=none $fs log_must $ZFS set recordsize=128K $fs log_must $ZFS set mountpoint=/$fs $fs typeset enc="" enc=$(get_prop encryption $fs) if [[ $? -ne 0 ]] || [[ -z "$enc" ]] || \ [[ "$enc" == "off" ]]; then log_must $ZFS set checksum=on $fs fi log_must $ZFS set compression=off $fs log_must $ZFS set atime=on $fs log_must $ZFS set devices=off $fs log_must $ZFS set exec=on $fs log_must $ZFS set setuid=on $fs log_must $ZFS set readonly=off $fs log_must $ZFS set snapdir=hidden $fs log_must $ZFS set aclmode=groupmask $fs log_must $ZFS set aclinherit=secure $fs fi done fi [[ -d $TESTDIR ]] && \ log_must $RM -rf $TESTDIR disk1=${DISKS%% *} if is_mpath_device $disk1; then delete_partitions fi } # # Common function used to cleanup storage pools, file systems # and containers. # function default_container_cleanup { if ! is_global_zone; then reexport_pool fi ismounted $TESTPOOL/$TESTCTR/$TESTFS1 [[ $? -eq 0 ]] && \ log_must $ZFS unmount $TESTPOOL/$TESTCTR/$TESTFS1 datasetexists $TESTPOOL/$TESTCTR/$TESTFS1 && \ log_must $ZFS destroy -R $TESTPOOL/$TESTCTR/$TESTFS1 datasetexists $TESTPOOL/$TESTCTR && \ log_must $ZFS destroy -Rf $TESTPOOL/$TESTCTR [[ -e $TESTDIR1 ]] && \ log_must $RM -rf $TESTDIR1 > /dev/null 2>&1 default_cleanup } # # Common function used to cleanup snapshot of file system or volume. Default to # delete the file system's snapshot # # $1 snapshot name # function destroy_snapshot { typeset snap=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} if ! snapexists $snap; then log_fail "'$snap' does not existed." fi # # For the sake of the value which come from 'get_prop' is not equal # to the really mountpoint when the snapshot is unmounted. So, firstly # check and make sure this snapshot's been mounted in current system. # typeset mtpt="" if ismounted $snap; then mtpt=$(get_prop mountpoint $snap) (($? != 0)) && \ log_fail "get_prop mountpoint $snap failed." fi log_must $ZFS destroy $snap [[ $mtpt != "" && -d $mtpt ]] && \ log_must $RM -rf $mtpt } # # Common function used to cleanup clone. # # $1 clone name # function destroy_clone { typeset clone=${1:-$TESTPOOL/$TESTCLONE} if ! datasetexists $clone; then log_fail "'$clone' does not existed." fi # With the same reason in destroy_snapshot typeset mtpt="" if ismounted $clone; then mtpt=$(get_prop mountpoint $clone) (($? != 0)) && \ log_fail "get_prop mountpoint $clone failed." fi log_must $ZFS destroy $clone [[ $mtpt != "" && -d $mtpt ]] && \ log_must $RM -rf $mtpt } # Return 0 if a snapshot exists; $? otherwise # # $1 - snapshot name function snapexists { $ZFS list -H -t snapshot "$1" > /dev/null 2>&1 return $? } # # Set a property to a certain value on a dataset. # Sets a property of the dataset to the value as passed in. # @param: # $1 dataset who's property is being set # $2 property to set # $3 value to set property to # @return: # 0 if the property could be set. # non-zero otherwise. # @use: ZFS # function dataset_setprop { typeset fn=dataset_setprop if (($# < 3)); then log_note "$fn: Insufficient parameters (need 3, had $#)" return 1 fi typeset output= output=$($ZFS set $2=$3 $1 2>&1) typeset rv=$? if ((rv != 0)); then log_note "Setting property on $1 failed." log_note "property $2=$3" log_note "Return Code: $rv" log_note "Output: $output" return $rv fi return 0 } # # Assign suite defined dataset properties. # This function is used to apply the suite's defined default set of # properties to a dataset. # @parameters: $1 dataset to use # @uses: ZFS COMPRESSION_PROP CHECKSUM_PROP # @returns: # 0 if the dataset has been altered. # 1 if no pool name was passed in. # 2 if the dataset could not be found. # 3 if the dataset could not have it's properties set. # function dataset_set_defaultproperties { typeset dataset="$1" [[ -z $dataset ]] && return 1 typeset confset= typeset -i found=0 for confset in $($ZFS list); do if [[ $dataset = $confset ]]; then found=1 break fi done [[ $found -eq 0 ]] && return 2 if [[ -n $COMPRESSION_PROP ]]; then dataset_setprop $dataset compression $COMPRESSION_PROP || \ return 3 log_note "Compression set to '$COMPRESSION_PROP' on $dataset" fi if [[ -n $CHECKSUM_PROP ]]; then dataset_setprop $dataset checksum $CHECKSUM_PROP || \ return 3 log_note "Checksum set to '$CHECKSUM_PROP' on $dataset" fi return 0 } # # Check a numeric assertion # @parameter: $@ the assertion to check # @output: big loud notice if assertion failed # @use: log_fail # function assert { (($@)) || log_fail "$@" } # # Function to format partition size of a disk # Given a disk cxtxdx reduces all partitions # to 0 size # function zero_partitions # { typeset diskname=$1 typeset i if is_linux; then log_must $FORMAT $DEV_DSKDIR/$diskname -s -- mklabel gpt else for i in 0 1 3 4 5 6 7 do set_partition $i "" 0mb $diskname done fi } # # Given a slice, size and disk, this function # formats the slice to the specified size. # Size should be specified with units as per # the `format` command requirements eg. 100mb 3gb # # NOTE: This entire interface is problematic for the Linux parted utilty # which requires the end of the partition to be specified. It would be # best to retire this interface and replace it with something more flexible. # At the moment a best effort is made. # function set_partition # { typeset -i slicenum=$1 typeset start=$2 typeset size=$3 typeset disk=$4 [[ -z $slicenum || -z $size || -z $disk ]] && \ log_fail "The slice, size or disk name is unspecified." if is_linux; then typeset size_mb=${size%%[mMgG]} size_mb=${size_mb%%[mMgG][bB]} if [[ ${size:1:1} == 'g' ]]; then ((size_mb = size_mb * 1024)) fi # Create GPT partition table when setting slice 0 or # when the device doesn't already contain a GPT label. $FORMAT $DEV_DSKDIR/$disk -s -- print 1 >/dev/null typeset ret_val=$? if [[ $slicenum -eq 0 || $ret_val -ne 0 ]]; then log_must $FORMAT $DEV_DSKDIR/$disk -s -- mklabel gpt fi # When no start is given align on the first cylinder. if [[ -z "$start" ]]; then start=1 fi # Determine the cylinder size for the device and using # that calculate the end offset in cylinders. typeset -i cly_size_kb=0 cly_size_kb=$($FORMAT -m $DEV_DSKDIR/$disk -s -- \ unit cyl print | $HEAD -3 | $TAIL -1 | \ $AWK -F '[:k.]' '{print $4}') ((end = (size_mb * 1024 / cly_size_kb) + start)) log_must $FORMAT $DEV_DSKDIR/$disk -s -- \ mkpart part$slicenum ${start}cyl ${end}cyl $BLOCKDEV --rereadpt $DEV_DSKDIR/$disk 2>/dev/null block_device_wait else typeset format_file=/var/tmp/format_in.$$ $ECHO "partition" >$format_file $ECHO "$slicenum" >> $format_file $ECHO "" >> $format_file $ECHO "" >> $format_file $ECHO "$start" >> $format_file $ECHO "$size" >> $format_file $ECHO "label" >> $format_file $ECHO "" >> $format_file $ECHO "q" >> $format_file $ECHO "q" >> $format_file $FORMAT -e -s -d $disk -f $format_file fi typeset ret_val=$? $RM -f $format_file [[ $ret_val -ne 0 ]] && \ log_fail "Unable to format $disk slice $slicenum to $size" return 0 } # # Delete all partitions on all disks - this is specifically for the use of multipath # devices which currently can only be used in the test suite as raw/un-partitioned # devices (ie a zpool cannot be created on a whole mpath device that has partitions) # function delete_partitions { typeset -i j=1 if [[ -z $DISK_ARRAY_NUM ]]; then DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}') fi if [[ -z $DISKSARRAY ]]; then DISKSARRAY=$DISKS fi if is_linux; then if (( $DISK_ARRAY_NUM == 1 )); then while ((j < MAX_PARTITIONS)); do $FORMAT $DEV_DSKDIR/$DISK -s rm $j > /dev/null 2>&1 if (( $? == 1 )); then $LSBLK | $EGREP ${DISK}${SLICE_PREFIX}${j} > /dev/null if (( $? == 1 )); then log_note "Partitions for $DISK should be deleted" else log_fail "Partition for ${DISK}${SLICE_PREFIX}${j} not deleted" fi return 0 else $LSBLK | $EGREP ${DISK}${SLICE_PREFIX}${j} > /dev/null if (( $? == 0 )); then log_fail "Partition for ${DISK}${SLICE_PREFIX}${j} not deleted" fi fi ((j = j+1)) done else for disk in `$ECHO $DISKSARRAY`; do while ((j < MAX_PARTITIONS)); do $FORMAT $DEV_DSKDIR/$disk -s rm $j > /dev/null 2>&1 if (( $? == 1 )); then $LSBLK | $EGREP ${disk}${SLICE_PREFIX}${j} > /dev/null if (( $? == 1 )); then log_note "Partitions for $disk should be deleted" else log_fail "Partition for ${disk}${SLICE_PREFIX}${j} not deleted" fi j=7 else $LSBLK | $EGREP ${disk}${SLICE_PREFIX}${j} > /dev/null if (( $? == 0 )); then log_fail "Partition for ${disk}${SLICE_PREFIX}${j} not deleted" fi fi ((j = j+1)) done j=1 done fi fi return 0 } # # Get the end cyl of the given slice # function get_endslice # { typeset disk=$1 typeset slice=$2 if [[ -z $disk || -z $slice ]] ; then log_fail "The disk name or slice number is unspecified." fi if is_linux; then endcyl=$($FORMAT -s $DEV_DSKDIR/$disk -- unit cyl print | \ $GREP "part${slice}" | \ $AWK '{print $3}' | \ $SED 's,cyl,,') ((endcyl = (endcyl + 1))) else disk=${disk#/dev/dsk/} disk=${disk#/dev/rdsk/} disk=${disk%s*} typeset -i ratio=0 ratio=$($PRTVTOC /dev/rdsk/${disk}s2 | \ $GREP "sectors\/cylinder" | \ $AWK '{print $2}') if ((ratio == 0)); then return fi typeset -i endcyl=$($PRTVTOC -h /dev/rdsk/${disk}s2 | $NAWK -v token="$slice" '{if ($1==token) print $6}') ((endcyl = (endcyl + 1) / ratio)) fi echo $endcyl } # # Given a size,disk and total slice number, this function formats the # disk slices from 0 to the total slice number with the same specified # size. # function partition_disk # { typeset -i i=0 typeset slice_size=$1 typeset disk_name=$2 typeset total_slices=$3 typeset cyl zero_partitions $disk_name while ((i < $total_slices)); do if ! is_linux; then if ((i == 2)); then ((i = i + 1)) continue fi fi set_partition $i "$cyl" $slice_size $disk_name cyl=$(get_endslice $disk_name $i) ((i = i+1)) done } # # This function continues to write to a filenum number of files into dirnum # number of directories until either $FILE_WRITE returns an error or the # maximum number of files per directory have been written. # # Usage: # fill_fs [destdir] [dirnum] [filenum] [bytes] [num_writes] [data] # # Return value: 0 on success # non 0 on error # # Where : # destdir: is the directory where everything is to be created under # dirnum: the maximum number of subdirectories to use, -1 no limit # filenum: the maximum number of files per subdirectory # bytes: number of bytes to write # num_writes: numer of types to write out bytes # data: the data that will be writen # # E.g. # file_fs /testdir 20 25 1024 256 0 # # Note: bytes * num_writes equals the size of the testfile # function fill_fs # destdir dirnum filenum bytes num_writes data { typeset destdir=${1:-$TESTDIR} typeset -i dirnum=${2:-50} typeset -i filenum=${3:-50} typeset -i bytes=${4:-8192} typeset -i num_writes=${5:-10240} typeset -i data=${6:-0} typeset -i odirnum=1 typeset -i idirnum=0 typeset -i fn=0 typeset -i retval=0 log_must $MKDIR -p $destdir/$idirnum while (($odirnum > 0)); do if ((dirnum >= 0 && idirnum >= dirnum)); then odirnum=0 break fi $FILE_WRITE -o create -f $destdir/$idirnum/$TESTFILE.$fn \ -b $bytes -c $num_writes -d $data retval=$? if (($retval != 0)); then odirnum=0 break fi if (($fn >= $filenum)); then fn=0 ((idirnum = idirnum + 1)) log_must $MKDIR -p $destdir/$idirnum else ((fn = fn + 1)) fi done return $retval } # # Simple function to get the specified property. If unable to # get the property then exits. # # Note property is in 'parsable' format (-p) # function get_prop # property dataset { typeset prop_val typeset prop=$1 typeset dataset=$2 prop_val=$($ZFS get -pH -o value $prop $dataset 2>/dev/null) if [[ $? -ne 0 ]]; then log_note "Unable to get $prop property for dataset " \ "$dataset" return 1 fi $ECHO $prop_val return 0 } # # Simple function to get the specified property of pool. If unable to # get the property then exits. # function get_pool_prop # property pool { typeset prop_val typeset prop=$1 typeset pool=$2 if poolexists $pool ; then prop_val=$($ZPOOL get $prop $pool 2>/dev/null | $TAIL -1 | \ $AWK '{print $3}') if [[ $? -ne 0 ]]; then log_note "Unable to get $prop property for pool " \ "$pool" return 1 fi else log_note "Pool $pool not exists." return 1 fi $ECHO $prop_val return 0 } # Return 0 if a pool exists; $? otherwise # # $1 - pool name function poolexists { typeset pool=$1 if [[ -z $pool ]]; then log_note "No pool name given." return 1 fi $ZPOOL get name "$pool" > /dev/null 2>&1 return $? } # Return 0 if all the specified datasets exist; $? otherwise # # $1-n dataset name function datasetexists { if (($# == 0)); then log_note "No dataset name given." return 1 fi while (($# > 0)); do $ZFS get name $1 > /dev/null 2>&1 || \ return $? shift done return 0 } # return 0 if none of the specified datasets exists, otherwise return 1. # # $1-n dataset name function datasetnonexists { if (($# == 0)); then log_note "No dataset name given." return 1 fi while (($# > 0)); do $ZFS list -H -t filesystem,snapshot,volume $1 > /dev/null 2>&1 \ && return 1 shift done return 0 } # # Given a mountpoint, or a dataset name, determine if it is shared. # # Returns 0 if shared, 1 otherwise. # function is_shared { typeset fs=$1 typeset mtpt if is_linux; then log_unsupported "Currently unsupported by the test framework" return 1 fi if [[ $fs != "/"* ]] ; then if datasetnonexists "$fs" ; then return 1 else mtpt=$(get_prop mountpoint "$fs") case $mtpt in none|legacy|-) return 1 ;; *) fs=$mtpt ;; esac fi fi for mtpt in `$SHARE | $AWK '{print $2}'` ; do if [[ $mtpt == $fs ]] ; then return 0 fi done typeset stat=$($SVCS -H -o STA nfs/server:default) if [[ $stat != "ON" ]]; then log_note "Current nfs/server status: $stat" fi return 1 } # # Given a mountpoint, determine if it is not shared. # # Returns 0 if not shared, 1 otherwise. # function not_shared { typeset fs=$1 if is_linux; then log_unsupported "Currently unsupported by the test framework" return 1 fi is_shared $fs if (($? == 0)); then return 1 fi return 0 } # # Helper function to unshare a mountpoint. # function unshare_fs #fs { typeset fs=$1 if is_linux; then log_unsupported "Currently unsupported by the test framework" return 1 fi is_shared $fs if (($? == 0)); then log_must $ZFS unshare $fs fi return 0 } # # Check NFS server status and trigger it online. # function setup_nfs_server { # Cannot share directory in non-global zone. # if ! is_global_zone; then log_note "Cannot trigger NFS server by sharing in LZ." return fi if is_linux; then log_unsupported "Currently unsupported by the test framework" return fi typeset nfs_fmri="svc:/network/nfs/server:default" if [[ $($SVCS -Ho STA $nfs_fmri) != "ON" ]]; then # # Only really sharing operation can enable NFS server # to online permanently. # typeset dummy=/tmp/dummy if [[ -d $dummy ]]; then log_must $RM -rf $dummy fi log_must $MKDIR $dummy log_must $SHARE $dummy # # Waiting for fmri's status to be the final status. # Otherwise, in transition, an asterisk (*) is appended for # instances, unshare will reverse status to 'DIS' again. # # Waiting for 1's at least. # log_must $SLEEP 1 timeout=10 while [[ timeout -ne 0 && $($SVCS -Ho STA $nfs_fmri) == *'*' ]] do log_must $SLEEP 1 ((timeout -= 1)) done log_must $UNSHARE $dummy log_must $RM -rf $dummy fi log_note "Current NFS status: '$($SVCS -Ho STA,FMRI $nfs_fmri)'" } # # To verify whether calling process is in global zone # # Return 0 if in global zone, 1 in non-global zone # function is_global_zone { typeset cur_zone=$($ZONENAME 2>/dev/null) if [[ $cur_zone != "global" ]]; then return 1 fi return 0 } # # Verify whether test is permitted to run from # global zone, local zone, or both # # $1 zone limit, could be "global", "local", or "both"(no limit) # # Return 0 if permitted, otherwise exit with log_unsupported # function verify_runnable # zone limit { typeset limit=$1 [[ -z $limit ]] && return 0 if is_global_zone ; then case $limit in global|both) ;; local) log_unsupported "Test is unable to run from "\ "global zone." ;; *) log_note "Warning: unknown limit $limit - " \ "use both." ;; esac else case $limit in local|both) ;; global) log_unsupported "Test is unable to run from "\ "local zone." ;; *) log_note "Warning: unknown limit $limit - " \ "use both." ;; esac reexport_pool fi return 0 } # Return 0 if create successfully or the pool exists; $? otherwise # Note: In local zones, this function should return 0 silently. # # $1 - pool name # $2-n - [keyword] devs_list function create_pool #pool devs_list { typeset pool=${1%%/*} shift if [[ -z $pool ]]; then log_note "Missing pool name." return 1 fi if poolexists $pool ; then destroy_pool $pool fi if is_global_zone ; then [[ -d /$pool ]] && $RM -rf /$pool log_must $ZPOOL create -f $pool $@ fi return 0 } # Return 0 if destroy successfully or the pool exists; $? otherwise # Note: In local zones, this function should return 0 silently. # # $1 - pool name # Destroy pool with the given parameters. function destroy_pool #pool { typeset pool=${1%%/*} typeset mtpt if [[ -z $pool ]]; then log_note "No pool name given." return 1 fi if is_global_zone ; then if poolexists "$pool" ; then mtpt=$(get_prop mountpoint "$pool") # At times, syseventd activity can cause attempts to # destroy a pool to fail with EBUSY. We retry a few # times allowing failures before requiring the destroy # to succeed. typeset -i wait_time=10 ret=1 count=0 must="" while [[ $ret -ne 0 ]]; do $must $ZPOOL destroy -f $pool ret=$? [[ $ret -eq 0 ]] && break log_note "zpool destroy failed with $ret" [[ count++ -ge 7 ]] && must=log_must $SLEEP $wait_time done [[ -d $mtpt ]] && \ log_must $RM -rf $mtpt else log_note "Pool does not exist. ($pool)" return 1 fi fi return 0 } # # Firstly, create a pool with 5 datasets. Then, create a single zone and # export the 5 datasets to it. In addition, we also add a ZFS filesystem # and a zvol device to the zone. # # $1 zone name # $2 zone root directory prefix # $3 zone ip # function zfs_zones_setup #zone_name zone_root zone_ip { typeset zone_name=${1:-$(hostname)-z} typeset zone_root=${2:-"/zone_root"} typeset zone_ip=${3:-"10.1.1.10"} typeset prefix_ctr=$ZONE_CTR typeset pool_name=$ZONE_POOL typeset -i cntctr=5 typeset -i i=0 # Create pool and 5 container within it # [[ -d /$pool_name ]] && $RM -rf /$pool_name log_must $ZPOOL create -f $pool_name $DISKS while ((i < cntctr)); do log_must $ZFS create $pool_name/$prefix_ctr$i ((i += 1)) done # create a zvol log_must $ZFS create -V 1g $pool_name/zone_zvol block_device_wait # # If current system support slog, add slog device for pool # if verify_slog_support ; then typeset sdevs="/var/tmp/sdev1 /var/tmp/sdev2" log_must $MKFILE 100M $sdevs log_must $ZPOOL add $pool_name log mirror $sdevs fi # this isn't supported just yet. # Create a filesystem. In order to add this to # the zone, it must have it's mountpoint set to 'legacy' # log_must $ZFS create $pool_name/zfs_filesystem # log_must $ZFS set mountpoint=legacy $pool_name/zfs_filesystem [[ -d $zone_root ]] && \ log_must $RM -rf $zone_root/$zone_name [[ ! -d $zone_root ]] && \ log_must $MKDIR -p -m 0700 $zone_root/$zone_name # Create zone configure file and configure the zone # typeset zone_conf=/tmp/zone_conf.$$ $ECHO "create" > $zone_conf $ECHO "set zonepath=$zone_root/$zone_name" >> $zone_conf $ECHO "set autoboot=true" >> $zone_conf i=0 while ((i < cntctr)); do $ECHO "add dataset" >> $zone_conf $ECHO "set name=$pool_name/$prefix_ctr$i" >> \ $zone_conf $ECHO "end" >> $zone_conf ((i += 1)) done # add our zvol to the zone $ECHO "add device" >> $zone_conf $ECHO "set match=$ZVOL_DEVDIR/$pool_name/zone_zvol" >> $zone_conf $ECHO "end" >> $zone_conf # add a corresponding zvol rdsk to the zone $ECHO "add device" >> $zone_conf $ECHO "set match=$ZVOL_RDEVDIR/$pool_name/zone_zvol" >> $zone_conf $ECHO "end" >> $zone_conf # once it's supported, we'll add our filesystem to the zone # $ECHO "add fs" >> $zone_conf # $ECHO "set type=zfs" >> $zone_conf # $ECHO "set special=$pool_name/zfs_filesystem" >> $zone_conf # $ECHO "set dir=/export/zfs_filesystem" >> $zone_conf # $ECHO "end" >> $zone_conf $ECHO "verify" >> $zone_conf $ECHO "commit" >> $zone_conf log_must $ZONECFG -z $zone_name -f $zone_conf log_must $RM -f $zone_conf # Install the zone $ZONEADM -z $zone_name install if (($? == 0)); then log_note "SUCCESS: $ZONEADM -z $zone_name install" else log_fail "FAIL: $ZONEADM -z $zone_name install" fi # Install sysidcfg file # typeset sysidcfg=$zone_root/$zone_name/root/etc/sysidcfg $ECHO "system_locale=C" > $sysidcfg $ECHO "terminal=dtterm" >> $sysidcfg $ECHO "network_interface=primary {" >> $sysidcfg $ECHO "hostname=$zone_name" >> $sysidcfg $ECHO "}" >> $sysidcfg $ECHO "name_service=NONE" >> $sysidcfg $ECHO "root_password=mo791xfZ/SFiw" >> $sysidcfg $ECHO "security_policy=NONE" >> $sysidcfg $ECHO "timezone=US/Eastern" >> $sysidcfg # Boot this zone log_must $ZONEADM -z $zone_name boot } # # Reexport TESTPOOL & TESTPOOL(1-4) # function reexport_pool { typeset -i cntctr=5 typeset -i i=0 while ((i < cntctr)); do if ((i == 0)); then TESTPOOL=$ZONE_POOL/$ZONE_CTR$i if ! ismounted $TESTPOOL; then log_must $ZFS mount $TESTPOOL fi else eval TESTPOOL$i=$ZONE_POOL/$ZONE_CTR$i if eval ! ismounted \$TESTPOOL$i; then log_must eval $ZFS mount \$TESTPOOL$i fi fi ((i += 1)) done } # # Verify a given disk is online or offline # # Return 0 is pool/disk matches expected state, 1 otherwise # function check_state # pool disk state{online,offline} { typeset pool=$1 typeset disk=${2#$DEV_DSKDIR/} typeset state=$3 $ZPOOL status -v $pool | grep "$disk" \ | grep -i "$state" > /dev/null 2>&1 return $? } # # Get the mountpoint of snapshot # For the snapshot use /.zfs/snapshot/ # as its mountpoint # function snapshot_mountpoint { typeset dataset=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} if [[ $dataset != *@* ]]; then log_fail "Error name of snapshot '$dataset'." fi typeset fs=${dataset%@*} typeset snap=${dataset#*@} if [[ -z $fs || -z $snap ]]; then log_fail "Error name of snapshot '$dataset'." fi $ECHO $(get_prop mountpoint $fs)/.zfs/snapshot/$snap } # # Given a pool and file system, this function will verify the file system # using the zdb internal tool. Note that the pool is exported and imported # to ensure it has consistent state. # function verify_filesys # pool filesystem dir { typeset pool="$1" typeset filesys="$2" typeset zdbout="/tmp/zdbout.$$" shift shift typeset dirs=$@ typeset search_path="" log_note "Calling $ZDB to verify filesystem '$filesys'" $ZFS unmount -a > /dev/null 2>&1 log_must $ZPOOL export $pool if [[ -n $dirs ]] ; then for dir in $dirs ; do search_path="$search_path -d $dir" done fi log_must $ZPOOL import $search_path $pool $ZDB -cudi $filesys > $zdbout 2>&1 if [[ $? != 0 ]]; then log_note "Output: $ZDB -cudi $filesys" $CAT $zdbout log_fail "$ZDB detected errors with: '$filesys'" fi log_must $ZFS mount -a log_must $RM -rf $zdbout } # # Given a pool, and this function list all disks in the pool # function get_disklist # pool { typeset disklist="" disklist=$($ZPOOL iostat -v $1 | $NAWK '(NR >4) {print $1}' | \ $GREP -v "\-\-\-\-\-" | \ $EGREP -v -e "^(mirror|raidz1|raidz2|spare|log|cache)$") $ECHO $disklist } # # Given a pool, and this function list all disks in the pool with their full # path (like "/dev/sda" instead of "sda"). # function get_disklist_fullpath # pool { args="-P $1" get_disklist $args } # /** # This function kills a given list of processes after a time period. We use # this in the stress tests instead of STF_TIMEOUT so that we can have processes # run for a fixed amount of time, yet still pass. Tests that hit STF_TIMEOUT # would be listed as FAIL, which we don't want : we're happy with stress tests # running for a certain amount of time, then finishing. # # @param $1 the time in seconds after which we should terminate these processes # @param $2..$n the processes we wish to terminate. # */ function stress_timeout { typeset -i TIMEOUT=$1 shift typeset cpids="$@" log_note "Waiting for child processes($cpids). " \ "It could last dozens of minutes, please be patient ..." log_must $SLEEP $TIMEOUT log_note "Killing child processes after ${TIMEOUT} stress timeout." typeset pid for pid in $cpids; do $PS -p $pid > /dev/null 2>&1 if (($? == 0)); then log_must $KILL -USR1 $pid fi done } # # Verify a given hotspare disk is inuse or avail # # Return 0 is pool/disk matches expected state, 1 otherwise # function check_hotspare_state # pool disk state{inuse,avail} { typeset pool=$1 typeset disk=${2#$DEV_DSKDIR/} typeset state=$3 cur_state=$(get_device_state $pool $disk "spares") if [[ $state != ${cur_state} ]]; then return 1 fi return 0 } # # Verify a given slog disk is inuse or avail # # Return 0 is pool/disk matches expected state, 1 otherwise # function check_slog_state # pool disk state{online,offline,unavail} { typeset pool=$1 typeset disk=${2#$DEV_DSKDIR/} typeset state=$3 cur_state=$(get_device_state $pool $disk "logs") if [[ $state != ${cur_state} ]]; then return 1 fi return 0 } # # Verify a given vdev disk is inuse or avail # # Return 0 is pool/disk matches expected state, 1 otherwise # function check_vdev_state # pool disk state{online,offline,unavail} { typeset pool=$1 typeset disk=${2#$/DEV_DSKDIR/} typeset state=$3 cur_state=$(get_device_state $pool $disk) if [[ $state != ${cur_state} ]]; then return 1 fi return 0 } # # Check the output of 'zpool status -v ', # and to see if the content of contain the specified. # # Return 0 is contain, 1 otherwise # function check_pool_status # pool token keyword { typeset pool=$1 typeset token=$2 typeset keyword=$3 $ZPOOL status -v "$pool" 2>/dev/null | $NAWK -v token="$token:" ' ($1==token) {print $0}' \ | $GREP -i "$keyword" > /dev/null 2>&1 return $? } # # These 5 following functions are instance of check_pool_status() # is_pool_resilvering - to check if the pool is resilver in progress # is_pool_resilvered - to check if the pool is resilver completed # is_pool_scrubbing - to check if the pool is scrub in progress # is_pool_scrubbed - to check if the pool is scrub completed # is_pool_scrub_stopped - to check if the pool is scrub stopped # function is_pool_resilvering #pool { check_pool_status "$1" "scan" "resilver in progress since " return $? } function is_pool_resilvered #pool { check_pool_status "$1" "scan" "resilvered " return $? } function is_pool_scrubbing #pool { check_pool_status "$1" "scan" "scrub in progress since " return $? } function is_pool_scrubbed #pool { check_pool_status "$1" "scan" "scrub repaired" return $? } function is_pool_scrub_stopped #pool { check_pool_status "$1" "scan" "scrub canceled" return $? } # # Use create_pool()/destroy_pool() to clean up the infomation in # in the given disk to avoid slice overlapping. # function cleanup_devices #vdevs { typeset pool="foopool$$" if poolexists $pool ; then destroy_pool $pool fi create_pool $pool $@ destroy_pool $pool return 0 } # # Verify the rsh connectivity to each remote host in RHOSTS. # # Return 0 if remote host is accessible; otherwise 1. # $1 remote host name # $2 username # function verify_rsh_connect #rhost, username { typeset rhost=$1 typeset username=$2 typeset rsh_cmd="$RSH -n" typeset cur_user= $GETENT hosts $rhost >/dev/null 2>&1 if (($? != 0)); then log_note "$rhost cannot be found from" \ "administrative database." return 1 fi $PING $rhost 3 >/dev/null 2>&1 if (($? != 0)); then log_note "$rhost is not reachable." return 1 fi if ((${#username} != 0)); then rsh_cmd="$rsh_cmd -l $username" cur_user="given user \"$username\"" else cur_user="current user \"`$LOGNAME`\"" fi if ! $rsh_cmd $rhost $TRUE; then log_note "$RSH to $rhost is not accessible" \ "with $cur_user." return 1 fi return 0 } # # Verify the remote host connection via rsh after rebooting # $1 remote host # function verify_remote { rhost=$1 # # The following loop waits for the remote system rebooting. # Each iteration will wait for 150 seconds. there are # total 5 iterations, so the total timeout value will # be 12.5 minutes for the system rebooting. This number # is an approxiate number. # typeset -i count=0 while ! verify_rsh_connect $rhost; do sleep 150 ((count = count + 1)) if ((count > 5)); then return 1 fi done return 0 } # # Replacement function for /usr/bin/rsh. This function will include # the /usr/bin/rsh and meanwhile return the execution status of the # last command. # # $1 usrname passing down to -l option of /usr/bin/rsh # $2 remote machine hostname # $3... command string # function rsh_status { typeset ruser=$1 typeset rhost=$2 typeset -i ret=0 typeset cmd_str="" typeset rsh_str="" shift; shift cmd_str="$@" err_file=/tmp/${rhost}.$$.err if ((${#ruser} == 0)); then rsh_str="$RSH -n" else rsh_str="$RSH -n -l $ruser" fi $rsh_str $rhost /bin/ksh -c "'$cmd_str; \ print -u 2 \"status=\$?\"'" \ >/dev/null 2>$err_file ret=$? if (($ret != 0)); then $CAT $err_file $RM -f $std_file $err_file log_fail "$RSH itself failed with exit code $ret..." fi ret=$($GREP -v 'print -u 2' $err_file | $GREP 'status=' | \ $CUT -d= -f2) (($ret != 0)) && $CAT $err_file >&2 $RM -f $err_file >/dev/null 2>&1 return $ret } # # Get the SUNWstc-fs-zfs package installation path in a remote host # $1 remote host name # function get_remote_pkgpath { typeset rhost=$1 typeset pkgpath="" pkgpath=$($RSH -n $rhost "$PKGINFO -l SUNWstc-fs-zfs | $GREP BASEDIR: |\ $CUT -d: -f2") $ECHO $pkgpath } #/** # A function to find and locate free disks on a system or from given # disks as the parameter. It works by locating disks that are in use # as swap devices and dump devices, and also disks listed in /etc/vfstab # # $@ given disks to find which are free, default is all disks in # the test system # # @return a string containing the list of available disks #*/ function find_disks { # Trust provided list, no attempt is made to locate unused devices. if is_linux; then $ECHO "$@" return fi sfi=/tmp/swaplist.$$ dmpi=/tmp/dumpdev.$$ max_finddisksnum=${MAX_FINDDISKSNUM:-6} $SWAP -l > $sfi $DUMPADM > $dmpi 2>/dev/null # write an awk script that can process the output of format # to produce a list of disks we know about. Note that we have # to escape "$2" so that the shell doesn't interpret it while # we're creating the awk script. # ------------------- $CAT > /tmp/find_disks.awk </dev/null | /tmp/find_disks.awk)} $RM /tmp/find_disks.awk unused="" for disk in $disks; do # Check for mounted $GREP "${disk}[sp]" /etc/mnttab >/dev/null (($? == 0)) && continue # Check for swap $GREP "${disk}[sp]" $sfi >/dev/null (($? == 0)) && continue # check for dump device $GREP "${disk}[sp]" $dmpi >/dev/null (($? == 0)) && continue # check to see if this disk hasn't been explicitly excluded # by a user-set environment variable $ECHO "${ZFS_HOST_DEVICES_IGNORE}" | $GREP "${disk}" > /dev/null (($? == 0)) && continue unused_candidates="$unused_candidates $disk" done $RM $sfi $RM $dmpi # now just check to see if those disks do actually exist # by looking for a device pointing to the first slice in # each case. limit the number to max_finddisksnum count=0 for disk in $unused_candidates; do if [ -b $DEV_DSKDIR/${disk}s0 ]; then if [ $count -lt $max_finddisksnum ]; then unused="$unused $disk" # do not impose limit if $@ is provided [[ -z $@ ]] && ((count = count + 1)) fi fi done # finally, return our disk list $ECHO $unused } # # Add specified user to specified group # # $1 group name # $2 user name # $3 base of the homedir (optional) # function add_user # { typeset gname=$1 typeset uname=$2 typeset basedir=${3:-"/var/tmp"} if ((${#gname} == 0 || ${#uname} == 0)); then log_fail "group name or user name are not defined." fi log_must $USERADD -g $gname -d $basedir/$uname -m $uname # Add new users to the same group and the command line utils. # This allows them to be run out of the original users home # directory as long as it permissioned to be group readable. if is_linux; then cmd_group=$(stat --format="%G" $ZFS) log_must $USERMOD -a -G $cmd_group $uname fi return 0 } # # Delete the specified user. # # $1 login name # $2 base of the homedir (optional) # function del_user # { typeset user=$1 typeset basedir=${2:-"/var/tmp"} if ((${#user} == 0)); then log_fail "login name is necessary." fi if $ID $user > /dev/null 2>&1; then log_must $USERDEL $user fi [[ -d $basedir/$user ]] && $RM -fr $basedir/$user return 0 } # # Select valid gid and create specified group. # # $1 group name # function add_group # { typeset group=$1 if ((${#group} == 0)); then log_fail "group name is necessary." fi # Assign 100 as the base gid, a larger value is selected for # Linux because for many distributions 1000 and under are reserved. if is_linux; then while true; do $GROUPADD $group > /dev/null 2>&1 typeset -i ret=$? case $ret in 0) return 0 ;; *) return 1 ;; esac done else typeset -i gid=100 while true; do $GROUPADD -g $gid $group > /dev/null 2>&1 typeset -i ret=$? case $ret in 0) return 0 ;; # The gid is not unique 4) ((gid += 1)) ;; *) return 1 ;; esac done fi } # # Delete the specified group. # # $1 group name # function del_group # { typeset grp=$1 if ((${#grp} == 0)); then log_fail "group name is necessary." fi if is_linux; then $GETENT group $grp > /dev/null 2>&1 typeset -i ret=$? case $ret in # Group does not exist. 2) return 0 ;; # Name already exists as a group name 0) log_must $GROUPDEL $grp ;; *) return 1 ;; esac else $GROUPMOD -n $grp $grp > /dev/null 2>&1 typeset -i ret=$? case $ret in # Group does not exist. 6) return 0 ;; # Name already exists as a group name 9) log_must $GROUPDEL $grp ;; *) return 1 ;; esac fi return 0 } # # This function will return true if it's safe to destroy the pool passed # as argument 1. It checks for pools based on zvols and files, and also # files contained in a pool that may have a different mountpoint. # function safe_to_destroy_pool { # $1 the pool name typeset pool="" typeset DONT_DESTROY="" # We check that by deleting the $1 pool, we're not # going to pull the rug out from other pools. Do this # by looking at all other pools, ensuring that they # aren't built from files or zvols contained in this pool. for pool in $($ZPOOL list -H -o name) do ALTMOUNTPOOL="" # this is a list of the top-level directories in each of the # files that make up the path to the files the pool is based on FILEPOOL=$($ZPOOL status -v $pool | $GREP /$1/ | \ $AWK '{print $1}') # this is a list of the zvols that make up the pool ZVOLPOOL=$($ZPOOL status -v $pool | $GREP "$ZVOL_DEVDIR/$1$" \ | $AWK '{print $1}') # also want to determine if it's a file-based pool using an # alternate mountpoint... POOL_FILE_DIRS=$($ZPOOL status -v $pool | \ $GREP / | $AWK '{print $1}' | \ $AWK -F/ '{print $2}' | $GREP -v "dev") for pooldir in $POOL_FILE_DIRS do OUTPUT=$($ZFS list -H -r -o mountpoint $1 | \ $GREP "${pooldir}$" | $AWK '{print $1}') ALTMOUNTPOOL="${ALTMOUNTPOOL}${OUTPUT}" done if [ ! -z "$ZVOLPOOL" ] then DONT_DESTROY="true" log_note "Pool $pool is built from $ZVOLPOOL on $1" fi if [ ! -z "$FILEPOOL" ] then DONT_DESTROY="true" log_note "Pool $pool is built from $FILEPOOL on $1" fi if [ ! -z "$ALTMOUNTPOOL" ] then DONT_DESTROY="true" log_note "Pool $pool is built from $ALTMOUNTPOOL on $1" fi done if [ -z "${DONT_DESTROY}" ] then return 0 else log_note "Warning: it is not safe to destroy $1!" return 1 fi } # # Get the available ZFS compression options # $1 option type zfs_set|zfs_compress # function get_compress_opts { typeset COMPRESS_OPTS typeset GZIP_OPTS="gzip gzip-1 gzip-2 gzip-3 gzip-4 gzip-5 \ gzip-6 gzip-7 gzip-8 gzip-9" if [[ $1 == "zfs_compress" ]] ; then COMPRESS_OPTS="on lzjb" elif [[ $1 == "zfs_set" ]] ; then COMPRESS_OPTS="on off lzjb" fi typeset valid_opts="$COMPRESS_OPTS" $ZFS get 2>&1 | $GREP gzip >/dev/null 2>&1 if [[ $? -eq 0 ]]; then valid_opts="$valid_opts $GZIP_OPTS" fi $ECHO "$valid_opts" } # # Verify zfs operation with -p option work as expected # $1 operation, value could be create, clone or rename # $2 dataset type, value could be fs or vol # $3 dataset name # $4 new dataset name # function verify_opt_p_ops { typeset ops=$1 typeset datatype=$2 typeset dataset=$3 typeset newdataset=$4 if [[ $datatype != "fs" && $datatype != "vol" ]]; then log_fail "$datatype is not supported." fi # check parameters accordingly case $ops in create) newdataset=$dataset dataset="" if [[ $datatype == "vol" ]]; then ops="create -V $VOLSIZE" fi ;; clone) if [[ -z $newdataset ]]; then log_fail "newdataset should not be empty" \ "when ops is $ops." fi log_must datasetexists $dataset log_must snapexists $dataset ;; rename) if [[ -z $newdataset ]]; then log_fail "newdataset should not be empty" \ "when ops is $ops." fi log_must datasetexists $dataset log_mustnot snapexists $dataset ;; *) log_fail "$ops is not supported." ;; esac # make sure the upper level filesystem does not exist if datasetexists ${newdataset%/*} ; then log_must $ZFS destroy -rRf ${newdataset%/*} fi # without -p option, operation will fail log_mustnot $ZFS $ops $dataset $newdataset log_mustnot datasetexists $newdataset ${newdataset%/*} # with -p option, operation should succeed log_must $ZFS $ops -p $dataset $newdataset block_device_wait if ! datasetexists $newdataset ; then log_fail "-p option does not work for $ops" fi # when $ops is create or clone, redo the operation still return zero if [[ $ops != "rename" ]]; then log_must $ZFS $ops -p $dataset $newdataset fi return 0 } # # Get configuration of pool # $1 pool name # $2 config name # function get_config { typeset pool=$1 typeset config=$2 typeset alt_root if ! poolexists "$pool" ; then return 1 fi alt_root=$($ZPOOL list -H $pool | $AWK '{print $NF}') if [[ $alt_root == "-" ]]; then value=$($ZDB -C $pool | $GREP "$config:" | $AWK -F: \ '{print $2}') else value=$($ZDB -e $pool | $GREP "$config:" | $AWK -F: \ '{print $2}') fi if [[ -n $value ]] ; then value=${value#'} value=${value%'} fi echo $value return 0 } # # Privated function. Random select one of items from arguments. # # $1 count # $2-n string # function _random_get { typeset cnt=$1 shift typeset str="$@" typeset -i ind ((ind = RANDOM % cnt + 1)) typeset ret=$($ECHO "$str" | $CUT -f $ind -d ' ') $ECHO $ret } # # Random select one of item from arguments which include NONE string # function random_get_with_non { typeset -i cnt=$# ((cnt =+ 1)) _random_get "$cnt" "$@" } # # Random select one of item from arguments which doesn't include NONE string # function random_get { _random_get "$#" "$@" } # # Detect if the current system support slog # function verify_slog_support { typeset dir=/tmp/disk.$$ typeset pool=foo.$$ typeset vdev=$dir/a typeset sdev=$dir/b $MKDIR -p $dir $MKFILE 64M $vdev $sdev typeset -i ret=0 if ! $ZPOOL create -n $pool $vdev log $sdev > /dev/null 2>&1; then ret=1 fi $RM -r $dir return $ret } # # The function will generate a dataset name with specific length # $1, the length of the name # $2, the base string to construct the name # function gen_dataset_name { typeset -i len=$1 typeset basestr="$2" typeset -i baselen=${#basestr} typeset -i iter=0 typeset l_name="" if ((len % baselen == 0)); then ((iter = len / baselen)) else ((iter = len / baselen + 1)) fi while ((iter > 0)); do l_name="${l_name}$basestr" ((iter -= 1)) done $ECHO $l_name } # # Get cksum tuple of dataset # $1 dataset name # # sample zdb output: # Dataset data/test [ZPL], ID 355, cr_txg 2413856, 31.0K, 7 objects, rootbp # DVA[0]=<0:803046400:200> DVA[1]=<0:81199000:200> [L0 DMU objset] fletcher4 # lzjb LE contiguous unique double size=800L/200P birth=2413856L/2413856P # fill=7 cksum=11ce125712:643a9c18ee2:125e25238fca0:254a3f74b59744 function datasetcksum { typeset cksum $SYNC cksum=$($ZDB -vvv $1 | $GREP "^Dataset $1 \[" | $GREP "cksum" \ | $AWK -F= '{print $7}') $ECHO $cksum } # # Get cksum of file # #1 file path # function checksum { typeset cksum cksum=$($CKSUM $1 | $AWK '{print $1}') $ECHO $cksum } # # Get the given disk/slice state from the specific field of the pool # function get_device_state #pool disk field("", "spares","logs") { typeset pool=$1 typeset disk=${2#$DEV_DSKDIR/} typeset field=${3:-$pool} state=$($ZPOOL status -v "$pool" 2>/dev/null | \ $NAWK -v device=$disk -v pool=$pool -v field=$field \ 'BEGIN {startconfig=0; startfield=0; } /config:/ {startconfig=1} (startconfig==1) && ($1==field) {startfield=1; next;} (startfield==1) && ($1==device) {print $2; exit;} (startfield==1) && ($1==field || $1 ~ "^spares$" || $1 ~ "^logs$") {startfield=0}') echo $state } # # print the given directory filesystem type # # $1 directory name # function get_fstype { typeset dir=$1 if [[ -z $dir ]]; then log_fail "Usage: get_fstype " fi # # $ df -n / # / : ufs # $DF -n $dir | $AWK '{print $3}' } # # Given a disk, label it to VTOC regardless what label was on the disk # $1 disk # function labelvtoc { typeset disk=$1 if [[ -z $disk ]]; then log_fail "The disk name is unspecified." fi typeset label_file=/var/tmp/labelvtoc.$$ typeset arch=$($UNAME -p) if is_linux; then log_note "Currently unsupported by the test framework" return 1 fi if [[ $arch == "i386" ]]; then $ECHO "label" > $label_file $ECHO "0" >> $label_file $ECHO "" >> $label_file $ECHO "q" >> $label_file $ECHO "q" >> $label_file $FDISK -B $disk >/dev/null 2>&1 # wait a while for fdisk finishes $SLEEP 60 elif [[ $arch == "sparc" ]]; then $ECHO "label" > $label_file $ECHO "0" >> $label_file $ECHO "" >> $label_file $ECHO "" >> $label_file $ECHO "" >> $label_file $ECHO "q" >> $label_file else log_fail "unknown arch type" fi $FORMAT -e -s -d $disk -f $label_file typeset -i ret_val=$? $RM -f $label_file # # wait the format to finish # $SLEEP 60 if ((ret_val != 0)); then log_fail "unable to label $disk as VTOC." fi return 0 } # # check if the system was installed as zfsroot or not # return: 0 ture, otherwise false # function is_zfsroot { $DF -n / | $GREP zfs > /dev/null 2>&1 return $? } # # get the root filesystem name if it's zfsroot system. # # return: root filesystem name function get_rootfs { typeset rootfs="" rootfs=$($AWK '{if ($2 == "/" && $3 == "zfs") print $1}' \ /etc/mnttab) if [[ -z "$rootfs" ]]; then log_fail "Can not get rootfs" fi $ZFS list $rootfs > /dev/null 2>&1 if (($? == 0)); then $ECHO $rootfs else log_fail "This is not a zfsroot system." fi } # # get the rootfs's pool name # return: # rootpool name # function get_rootpool { typeset rootfs="" typeset rootpool="" rootfs=$($AWK '{if ($2 == "/" && $3 =="zfs") print $1}' \ /etc/mnttab) if [[ -z "$rootfs" ]]; then log_fail "Can not get rootpool" fi $ZFS list $rootfs > /dev/null 2>&1 if (($? == 0)); then rootpool=`$ECHO $rootfs | awk -F\/ '{print $1}'` $ECHO $rootpool else log_fail "This is not a zfsroot system." fi } # # Get the sub string from specified source string # # $1 source string # $2 start position. Count from 1 # $3 offset # function get_substr #src_str pos offset { typeset pos offset $ECHO $1 | \ $NAWK -v pos=$2 -v offset=$3 '{print substr($0, pos, offset)}' } # # Check if the given device is physical device # function is_physical_device #device { typeset device=${1#$DEV_DSKDIR} device=${device#$DEV_RDSKDIR} if is_linux; then [[ -b "$DEV_DSKDIR/$device" ]] && \ [[ -f /sys/module/loop/parameters/max_part ]] return $? else $ECHO $device | $EGREP "^c[0-F]+([td][0-F]+)+$" > /dev/null 2>&1 return $? fi } # # Check if the given device is a real device (ie SCSI device) # function is_real_device #disk { typeset disk=$1 [[ -z $disk ]] && log_fail "No argument for disk given." if is_linux; then $LSBLK $DEV_RDSKDIR/$disk -o TYPE | $EGREP disk > /dev/null 2>&1 return $? fi } # # Check if the given device is a loop device # function is_loop_device #disk { typeset disk=$1 [[ -z $disk ]] && log_fail "No argument for disk given." if is_linux; then $LSBLK $DEV_RDSKDIR/$disk -o TYPE | $EGREP loop > /dev/null 2>&1 return $? fi } # # Check if the given device is a multipath device and if there is a sybolic # link to a device mapper and to a disk # Currently no support for dm devices alone without multipath # function is_mpath_device #disk { typeset disk=$1 [[ -z $disk ]] && log_fail "No argument for disk given." if is_linux; then $LSBLK $DEV_MPATHDIR/$disk -o TYPE | $EGREP mpath > /dev/null 2>&1 if (($? == 0)); then $READLINK $DEV_MPATHDIR/$disk > /dev/null 2>&1 return $? else return $? fi fi } # Set the slice prefix for disk partitioning depending # on whether the device is a real, multipath, or loop device. # Currently all disks have to be of the same type, so only # checks first disk to determine slice prefix. # function set_slice_prefix { typeset disk typeset -i i=0 if is_linux; then while (( i < $DISK_ARRAY_NUM )); do disk="$($ECHO $DISKS | $NAWK '{print $(i + 1)}')" if ( is_mpath_device $disk ) && [[ -z $($ECHO $disk | awk 'substr($1,18,1)\ ~ /^[[:digit:]]+$/') ]] || ( is_real_device $disk ); then export SLICE_PREFIX="" return 0 elif ( is_mpath_device $disk || is_loop_device $disk ); then export SLICE_PREFIX="p" return 0 else log_fail "$disk not supported for partitioning." fi (( i = i + 1)) done fi } # # Set the directory path of the listed devices in $DISK_ARRAY_NUM # Currently all disks have to be of the same type, so only # checks first disk to determine device directory # default = /dev (linux) # real disk = /dev (linux) # multipath device = /dev/mapper (linux) # function set_device_dir { typeset disk typeset -i i=0 if is_linux; then while (( i < $DISK_ARRAY_NUM )); do disk="$($ECHO $DISKS | $NAWK '{print $(i + 1)}')" if is_mpath_device $disk; then export DEV_DSKDIR=$DEV_MPATHDIR return 0 else export DEV_DSKDIR=$DEV_RDSKDIR return 0 fi (( i = i + 1)) done else export DEV_DSKDIR=$DEV_RDSKDIR fi } # # Get the directory path of given device # function get_device_dir #device { typeset device=$1 if ! $(is_physical_device $device) ; then if [[ $device != "/" ]]; then device=${device%/*} fi if [[ -b "$DEV_DSKDIR/$device" ]]; then device="$DEV_DSKDIR" fi $ECHO $device else $ECHO "$DEV_DSKDIR" fi } # # Get the package name # function get_package_name { typeset dirpath=${1:-$STC_NAME} echo "SUNWstc-${dirpath}" | /usr/bin/sed -e "s/\//-/g" } # # Get the word numbers from a string separated by white space # function get_word_count { $ECHO $1 | $WC -w } # # To verify if the require numbers of disks is given # function verify_disk_count { typeset -i min=${2:-1} typeset -i count=$(get_word_count "$1") if ((count < min)); then log_untested "A minimum of $min disks is required to run." \ " You specified $count disk(s)" fi } function ds_is_volume { typeset type=$(get_prop type $1) [[ $type = "volume" ]] && return 0 return 1 } function ds_is_filesystem { typeset type=$(get_prop type $1) [[ $type = "filesystem" ]] && return 0 return 1 } function ds_is_snapshot { typeset type=$(get_prop type $1) [[ $type = "snapshot" ]] && return 0 return 1 } # # Check if Trusted Extensions are installed and enabled # function is_te_enabled { $SVCS -H -o state labeld 2>/dev/null | $GREP "enabled" if (($? != 0)); then return 1 else return 0 fi } # Utility function to determine if a system has multiple cpus. function is_mp { if is_linux; then (($($NPROC) > 1)) else (($($PSRINFO | $WC -l) > 1)) fi return $? } function get_cpu_freq { if is_linux; then lscpu | $AWK '/CPU MHz/ { print $3 }' else $PSRINFO -v 0 | $AWK '/processor operates at/ {print $6}' fi } # Run the given command as the user provided. function user_run { typeset user=$1 shift log_note "user:$user $@" eval \$SU \$user -c \"$@\" > /tmp/out 2>/tmp/err return $? } # # Check if the pool contains the specified vdevs # # $1 pool # $2..n ... # # Return 0 if the vdevs are contained in the pool, 1 if any of the specified # vdevs is not in the pool, and 2 if pool name is missing. # function vdevs_in_pool { typeset pool=$1 typeset vdev if [[ -z $pool ]]; then log_note "Missing pool name." return 2 fi shift typeset tmpfile=$($MKTEMP) $ZPOOL list -Hv "$pool" >$tmpfile for vdev in $@; do $GREP -w ${vdev##*/} $tmpfile >/dev/null 2>&1 [[ $? -ne 0 ]] && return 1 done $RM -f $tmpfile return 0; } function get_max { typeset -l i max=$1 shift for i in "$@"; do max=$(echo $((max > i ? max : i))) done echo $max } function get_min { typeset -l i min=$1 shift for i in "$@"; do min=$(echo $((min < i ? min : i))) done echo $min } # # Wait for newly created block devices to have their minors created. # function block_device_wait { if is_linux; then $UDEVADM trigger $UDEVADM settle fi } # # Synchronize all the data in pool # # $1 pool name # function sync_pool #pool { typeset pool=${1:-$TESTPOOL} log_must $SYNC log_must $SLEEP 2 # Flush all the pool data. typeset -i ret $ZPOOL scrub $pool >/dev/null 2>&1 ret=$? (( $ret != 0 )) && \ log_fail "$ZPOOL scrub $pool failed." while ! is_pool_scrubbed $pool; do if is_pool_resilvered $pool ; then log_fail "$pool should not be resilver completed." fi log_must $SLEEP 2 done }