+ ## The mask is used to control memory profile behavior.<BR><BR>\r
+ # BIT0 - Enable UEFI memory profile.<BR>\r
+ # BIT1 - Enable SMRAM profile.<BR>\r
+ # @Prompt Memory Profile Property.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
+\r
+ ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
+ # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
+ #\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0001<BR>\r
+ # EfiLoaderCode 0x0002<BR>\r
+ # EfiLoaderData 0x0004<BR>\r
+ # EfiBootServicesCode 0x0008<BR>\r
+ # EfiBootServicesData 0x0010<BR>\r
+ # EfiRuntimeServicesCode 0x0020<BR>\r
+ # EfiRuntimeServicesData 0x0040<BR>\r
+ # EfiConventionalMemory 0x0080<BR>\r
+ # EfiUnusableMemory 0x0100<BR>\r
+ # EfiACPIReclaimMemory 0x0200<BR>\r
+ # EfiACPIMemoryNVS 0x0400<BR>\r
+ # EfiMemoryMappedIO 0x0800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
+ # EfiPalCode 0x2000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ #\r
+ # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
+ #\r
+ # @Prompt Memory profile memory type.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
+\r
+ ## UART clock frequency is for the baud rate configuration.\r
+ # @Prompt Serial Port Clock Rate.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+ \r
+ ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
+ # information that describes the path that contains zero or more PCI to PCI briges \r
+ # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
+ # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
+ # and the last two bytes are the offset to the PCI power management capabilities \r
+ # register used to manage the D0-D3 states. If a PCI power management capabilities \r
+ # register is not present, then the last two bytes in the offset is set to 0. The \r
+ # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r
+ # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
+ # @Prompt Pci Serial Device Info\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
+\r
+ ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
+ # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
+ \r