/** @file\r
Internal include file for Base UEFI Decompress Libary.\r
\r
- Copyright (c) 2006, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
+ Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
#include <Library/DebugLib.h>\r
#include <Library/BaseMemoryLib.h>\r
\r
-//\r
-// Decompression algorithm begins here\r
-//\r
-#define BITBUFSIZ 32\r
-#define MAXMATCH 256\r
-#define THRESHOLD 3\r
-#define CODE_BIT 16\r
-#define BAD_TABLE - 1\r
-\r
-//\r
-// C: Char&Len Set; P: Position Set; T: exTra Set\r
-//\r
-#define NC (0xff + MAXMATCH + 2 - THRESHOLD)\r
-#define CBIT 9\r
-#define MAXPBIT 5\r
-#define TBIT 5\r
-#define MAXNP ((1U << MAXPBIT) - 1)\r
-#define NT (CODE_BIT + 3)\r
-#if NT > MAXNP\r
-#define NPT NT\r
-#else\r
-#define NPT MAXNP\r
-#endif\r
-\r
-typedef struct {\r
- UINT8 *mSrcBase; // Starting address of compressed data\r
- UINT8 *mDstBase; // Starting address of decompressed data\r
- UINT32 mOutBuf;\r
- UINT32 mInBuf;\r
-\r
- UINT16 mBitCount;\r
- UINT32 mBitBuf;\r
- UINT32 mSubBitBuf;\r
- UINT16 mBlockSize;\r
- UINT32 mCompSize;\r
- UINT32 mOrigSize;\r
-\r
- UINT16 mBadTableFlag;\r
-\r
- UINT16 mLeft[2 * NC - 1];\r
- UINT16 mRight[2 * NC - 1];\r
- UINT8 mCLen[NC];\r
- UINT8 mPTLen[NPT];\r
- UINT16 mCTable[4096];\r
- UINT16 mPTTable[256];\r
-\r
- //\r
- // The length of the field 'Position Set Code Length Array Size' in Block Header.\r
- // For UEFI 2.0 de/compression algorithm, mPBit = 4\r
- // For Tiano de/compression algorithm, mPBit = 5\r
- //\r
- UINT8 mPBit;\r
-} SCRATCH_DATA;\r
-\r
-/**\r
- Read NumOfBit of bits from source into mBitBuf\r
-\r
- Shift mBitBuf NumOfBits left. Read in NumOfBits of bits from source.\r
-\r
- @param Sd The global scratch data\r
- @param NumOfBits The number of bits to shift and read.\r
-\r
-**/\r
-VOID\r
-FillBuf (\r
- IN SCRATCH_DATA *Sd,\r
- IN UINT16 NumOfBits\r
- );\r
-\r
-/**\r
- Get NumOfBits of bits out from mBitBuf\r
-\r
- Get NumOfBits of bits out from mBitBuf. Fill mBitBuf with subsequent \r
- NumOfBits of bits from source. Returns NumOfBits of bits that are \r
- popped out.\r
-\r
- @param Sd The global scratch data.\r
- @param NumOfBits The number of bits to pop and read.\r
-\r
- @return The bits that are popped out.\r
-\r
-**/\r
-UINT32\r
-GetBits (\r
- IN SCRATCH_DATA *Sd,\r
- IN UINT16 NumOfBits\r
- );\r
-\r
-/**\r
- Creates Huffman Code mapping table according to code length array.\r
-\r
- Creates Huffman Code mapping table for Extra Set, Char&Len Set \r
- and Position Set according to code length array.\r
-\r
- @param Sd The global scratch data\r
- @param NumOfChar Number of symbols in the symbol set\r
- @param BitLen Code length array\r
- @param TableBits The width of the mapping table\r
- @param Table The table\r
-\r
- @retval 0 OK.\r
- @retval BAD_TABLE The table is corrupted.\r
-\r
-**/\r
-UINT16\r
-MakeTable (\r
- IN SCRATCH_DATA *Sd,\r
- IN UINT16 NumOfChar,\r
- IN UINT8 *BitLen,\r
- IN UINT16 TableBits,\r
- OUT UINT16 *Table\r
- );\r
-\r
-/**\r
- Decodes a position value.\r
-\r
- Get a position value according to Position Huffman Table.\r
- \r
- @param Sd the global scratch data\r
-\r
- @return The position value decoded.\r
+EFI_STATUS\r
+EFIAPI\r
+TianoGetInfo (\r
+ IN VOID *Source,\r
+ IN UINT32 SrcSize,\r
+ OUT UINT32 *DstSize,\r
+ OUT UINT32 *ScratchSize\r
+ )\r
+/*++\r
\r
-**/\r
-UINT32\r
-DecodeP (\r
- IN SCRATCH_DATA *Sd\r
- );\r
+Routine Description:\r
\r
-/**\r
- Reads code lengths for the Extra Set or the Position Set.\r
+ The implementation is same as that of EFI_TIANO_DECOMPRESS_PROTOCOL.GetInfo().\r
\r
- Read in the Extra Set or Pointion Set Length Arrary, then\r
- generate the Huffman code mapping for them.\r
+Arguments:\r
\r
- @param Sd The global scratch data.\r
- @param nn Number of symbols.\r
- @param nbit Number of bits needed to represent nn.\r
- @param Special The special symbol that needs to be taken care of.\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SrcSize - The size of source buffer\r
+ DstSize - The size of destination buffer.\r
+ ScratchSize - The size of scratch buffer.\r
\r
- @retval 0 OK.\r
- @retval BAD_TABLE Table is corrupted.\r
+Returns:\r
\r
-**/\r
-UINT16\r
-ReadPTLen (\r
- IN SCRATCH_DATA *Sd,\r
- IN UINT16 nn,\r
- IN UINT16 nbit,\r
- IN UINT16 Special\r
- );\r
-\r
-/**\r
- Reads code lengths for Char&Len Set.\r
- \r
- Read in and decode the Char&Len Set Code Length Array, then\r
- generate the Huffman Code mapping table for the Char&Len Set.\r
-\r
- @param Sd the global scratch data\r
+ EFI_SUCCESS - The size of destination buffer and the size of scratch buffer are successull retrieved.\r
+ EFI_INVALID_PARAMETER - The source data is corrupted\r
\r
-**/\r
-VOID\r
-ReadCLen (\r
- SCRATCH_DATA *Sd\r
- );\r
+--*/\r
+;\r
\r
-/**\r
- Decode a character/length value.\r
- \r
- Read one value from mBitBuf, Get one code from mBitBuf. If it is at block boundary, generates\r
- Huffman code mapping table for Extra Set, Code&Len Set and\r
- Position Set.\r
+EFI_STATUS\r
+EFIAPI\r
+TianoDecompress (\r
+ IN VOID *Source,\r
+ IN UINT32 SrcSize,\r
+ IN OUT VOID *Destination,\r
+ IN UINT32 DstSize,\r
+ IN OUT VOID *Scratch,\r
+ IN UINT32 ScratchSize\r
+ )\r
+/*++\r
\r
- @param Sd The global scratch data.\r
+Routine Description:\r
\r
- @return The value decoded.\r
+ The implementation is same as that of EFI_TIANO_DECOMPRESS_PROTOCOL.Decompress().\r
\r
-**/\r
-UINT16\r
-DecodeC (\r
- SCRATCH_DATA *Sd\r
- );\r
+Arguments:\r
\r
-/**\r
- Decode the source data and put the resulting data into the destination buffer.\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SrcSize - The size of source buffer\r
+ Destination - The destination buffer to store the decompressed data\r
+ DstSize - The size of destination buffer.\r
+ Scratch - The buffer used internally by the decompress routine. This buffer is needed to store intermediate data.\r
+ ScratchSize - The size of scratch buffer.\r
\r
- Decode the source data and put the resulting data into the destination buffer.\r
- \r
- @param Sd The global scratch data\r
+Returns:\r
\r
-**/\r
-VOID\r
-Decode (\r
- SCRATCH_DATA *Sd\r
- );\r
+ EFI_SUCCESS - Decompression is successfull\r
+ EFI_INVALID_PARAMETER - The source data is corrupted\r
\r
-RETURN_STATUS\r
-EFIAPI\r
-UefiTianoDecompress (\r
- IN CONST VOID *Source,\r
- IN OUT VOID *Destination,\r
- IN OUT VOID *Scratch,\r
- IN UINT32 Version\r
- );\r
+--*/\r
+;\r
\r
#endif\r