/** @file\r
- Generic BDS library defines general interfaces for BDS driver including:\r
- 1) BDS boot policy interface;\r
- 2) BDS boot device connect interface;\r
+ Generic BDS library defines general interfaces for a BDS driver, including:\r
+ 1) BDS boot policy interface.\r
+ 2) BDS boot device connect interface.\r
3) BDS Misc interfaces for mainting boot variable, ouput string.\r
\r
-Copyright (c) 2004 - 2009, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
-are licensed and made available under the terms and conditions of the BSD License\r
-which accompanies this distribution. The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php\r
-\r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials are licensed and made available under \r
+the terms and conditions of the BSD License that accompanies this distribution. \r
+The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php. \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
#ifndef _GENERIC_BDS_LIB_H_\r
#define _GENERIC_BDS_LIB_H_\r
\r
-extern EFI_HANDLE mBdsImageHandle;\r
+#include <Protocol/UserManager.h>\r
\r
-//\r
-// Constants which are variable names used to access variables\r
-//\r
+///\r
+/// Constants which are variable names used to access variables.\r
+///\r
#define VAR_LEGACY_DEV_ORDER L"LegacyDevOrder"\r
\r
-//\r
-// Data structures and defines\r
-//\r
+///\r
+/// Data structures and defines.\r
+///\r
#define FRONT_PAGE_QUESTION_ID 0x0000\r
#define FRONT_PAGE_DATA_WIDTH 0x01\r
\r
-//\r
-// ConnectType\r
-//\r
+///\r
+/// ConnectType\r
+///\r
#define CONSOLE_OUT 0x00000001\r
#define STD_ERROR 0x00000002\r
#define CONSOLE_IN 0x00000004\r
#define CONSOLE_ALL (CONSOLE_OUT | CONSOLE_IN | STD_ERROR)\r
\r
-//\r
-// Load Option Attributes defined in EFI Specification\r
-//\r
+///\r
+/// Load Option Attributes\r
+///\r
#define LOAD_OPTION_ACTIVE 0x00000001\r
#define LOAD_OPTION_FORCE_RECONNECT 0x00000002\r
\r
\r
#define IS_LOAD_OPTION_TYPE(_c, _Mask) (BOOLEAN) (((_c) & (_Mask)) != 0)\r
\r
-//\r
-// Define Maxmim characters that will be accepted\r
-//\r
+///\r
+/// Define the maximum characters that will be accepted.\r
+///\r
#define MAX_CHAR 480\r
#define MAX_CHAR_SIZE (MAX_CHAR * 2)\r
\r
-#define MIN_ALIGNMENT_SIZE 4\r
-#define ALIGN_SIZE(a) ((a % MIN_ALIGNMENT_SIZE) ? MIN_ALIGNMENT_SIZE - (a % MIN_ALIGNMENT_SIZE) : 0)\r
-\r
-//\r
-// Define maximum characters for boot option variable "BootXXXX"\r
-//\r
+///\r
+/// Define maximum characters for boot option variable "BootXXXX".\r
+///\r
#define BOOT_OPTION_MAX_CHAR 10\r
\r
//\r
-// This data structure is the part of BDS_CONNECT_ENTRY that we can hard code.\r
+// This data structure is the part of BDS_CONNECT_ENTRY\r
//\r
#define BDS_LOAD_OPTION_SIGNATURE SIGNATURE_32 ('B', 'd', 'C', 'O')\r
\r
UINTN ConnectType;\r
} BDS_CONSOLE_CONNECT_ENTRY;\r
\r
-//\r
-// Lib Functions\r
-//\r
-\r
//\r
// Bds boot related lib functions\r
//\r
);\r
\r
/**\r
- Process the boot option follow the UEFI specification and\r
- special treat the legacy boot option with BBS_DEVICE_PATH.\r
+ Process the boot option according to the UEFI specification. The legacy boot option device path includes BBS_DEVICE_PATH.\r
\r
- @param Option The boot option need to be processed\r
- @param DevicePath The device path which describe where to load the\r
+ @param Option The boot option to be processed.\r
+ @param DevicePath The device path describing where to load the\r
boot image or the legcy BBS device path to boot\r
- the legacy OS\r
+ the legacy OS.\r
@param ExitDataSize The size of exit data.\r
@param ExitData Data returned when Boot image failed.\r
\r
- @retval EFI_SUCCESS Boot from the input boot option successfully.\r
- @retval EFI_NOT_FOUND If the Device Path is not found in the system\r
+ @retval EFI_SUCCESS Boot from the input boot option succeeded.\r
+ @retval EFI_NOT_FOUND The Device Path is not found in the system.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- This function will enumerate all possible boot device in the system,\r
- it will only excute once of every boot.\r
-\r
- @param BdsBootOptionList The header of the link list which indexed all\r
- current boot options\r
+ This function will enumerate all possible boot devices in the system, and\r
+ automatically create boot options for Network, Shell, Removable BlockIo, \r
+ and Non-BlockIo Simplefile devices. \r
+ \r
+ BDS separates EFI boot options into six types:\r
+ 1. Network - The boot option points to the SimpleNetworkProtocol device. \r
+ Bds will try to automatically create this type of boot option during enumeration.\r
+ 2. Shell - The boot option points to internal flash shell. \r
+ Bds will try to automatically create this type of boot option during enumeration.\r
+ 3. Removable BlockIo - The boot option points to a removable media\r
+ device, such as a USB flash drive or DVD drive.\r
+ These devices should contain a *removable* blockIo\r
+ protocol in their device handle.\r
+ Bds will try to automatically create this type boot option \r
+ when enumerate.\r
+ 4. Fixed BlockIo - The boot option points to a Fixed blockIo device, \r
+ such as a hard disk.\r
+ These devices should contain a *fixed* blockIo\r
+ protocol in their device handle.\r
+ BDS will skip fixed blockIo devices, and not\r
+ automatically create boot option for them. But BDS \r
+ will help to delete those fixed blockIo boot options, \r
+ whose description rules conflict with other auto-created\r
+ boot options.\r
+ 5. Non-BlockIo Simplefile - The boot option points to a device whose handle \r
+ has SimpleFileSystem Protocol, but has no blockio\r
+ protocol. These devices do not offer blockIo\r
+ protocol, but BDS still can get the \r
+ \EFI\BOOT\boot{machinename}.EFI by SimpleFileSystem\r
+ Protocol.\r
+ 6. File - The boot option points to a file. These boot options are usually \r
+ created by the user, either manually or with an OS loader. BDS will not delete or modify\r
+ these boot options. \r
+ \r
+ This function will enumerate all possible boot devices in the system, and\r
+ automatically create boot options for Network, Shell, Removable BlockIo, \r
+ and Non-BlockIo Simplefile devices.\r
+ It will excute once every boot.\r
+ \r
+ @param BdsBootOptionList The header of the linked list that indexed all\r
+ current boot options.\r
\r
- @retval EFI_SUCCESS Finished all the boot device enumerate and create\r
- the boot option base on that boot device\r
+ @retval EFI_SUCCESS Finished all the boot device enumerations and \r
+ created the boot option based on the boot device.\r
\r
+ @retval EFI_OUT_OF_RESOURCES Failed to enumerate the boot device and create \r
+ the boot option list.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Build the boot option with the handle parsed in\r
+ Build the boot option with the handle parsed in.\r
\r
- @param Handle The handle which present the device path to create\r
- boot option\r
- @param BdsBootOptionList The header of the link list which indexed all\r
- current boot options\r
+ @param Handle The handle representing the device path for which \r
+ to create a boot option.\r
+ @param BdsBootOptionList The header of the link list that indexed all\r
+ current boot options.\r
@param String The description of the boot option.\r
\r
**/\r
Build the on flash shell boot option with the handle parsed in.\r
\r
@param Handle The handle which present the device path to create\r
- on flash shell boot option\r
- @param BdsBootOptionList The header of the link list which indexed all\r
- current boot options\r
+ the on flash shell boot option.\r
+ @param BdsBootOptionList The header of the link list that indexed all\r
+ current boot options.\r
\r
**/\r
VOID\r
// Bds misc lib functions\r
//\r
/**\r
- Get boot mode by looking up configuration table and parsing HOB list\r
+ Get boot mode by looking up the configuration table and parsing the HOB list.\r
\r
- @param BootMode Boot mode from PEI handoff HOB.\r
+ @param BootMode The boot mode from PEI handoff HOB.\r
\r
- @retval EFI_SUCCESS Successfully get boot mode\r
+ @retval EFI_SUCCESS Successfully got boot mode.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- The function will go through the driver optoin link list, load and start\r
- every driver the driver optoin device path point to.\r
+ The function will go through the driver option link list, and then load and start\r
+ every driver to which the driver option device path points.\r
\r
- @param BdsDriverLists The header of the current driver option link list\r
+ @param BdsDriverLists The header of the current driver option link list.\r
\r
**/\r
VOID\r
\r
\r
/**\r
- Process BootOrder, or DriverOrder variables, by calling\r
- BdsLibVariableToOption () for each UINT16 in the variables.\r
+ This function processes BootOrder or DriverOrder variables, by calling\r
\r
- @param BdsCommonOptionList The header of the option list base on variable\r
- VariableName\r
- @param VariableName EFI Variable name indicate the BootOrder or\r
- DriverOrder\r
+ BdsLibVariableToOption () for each UINT16 in the variables.\r
\r
- @retval EFI_SUCCESS Success create the boot option or driver option\r
- list\r
- @retval EFI_OUT_OF_RESOURCES Failed to get the boot option or driver option list\r
+ @param BdsCommonOptionList The header of the option list base on the variable\r
+ VariableName.\r
+ @param VariableName An EFI Variable name indicate the BootOrder or\r
+ DriverOrder.\r
\r
+ @retval EFI_SUCCESS Successfully created the boot option or driver option\r
+ list.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to get the boot option or the driver option list.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Read the EFI variable (VendorGuid/Name) and return a dynamically allocated\r
- buffer, and the size of the buffer. If failure return NULL.\r
+ This function reads the EFI variable (VendorGuid/Name) and returns a dynamically allocated\r
+ buffer and the size of the buffer. If it fails, return NULL.\r
\r
- @param Name String part of EFI variable name\r
- @param VendorGuid GUID part of EFI variable name\r
- @param VariableSize Returns the size of the EFI variable that was read\r
+ @param Name The string part of the EFI variable name.\r
+ @param VendorGuid The GUID part of the EFI variable name.\r
+ @param VariableSize Returns the size of the EFI variable that was read.\r
\r
- @return Dynamically allocated memory that contains a copy of the EFI variable\r
- Caller is responsible freeing the buffer.\r
- @retval NULL Variable was not read\r
+ @return Dynamically allocated memory that contains a copy \r
+ of the EFI variable. The caller is responsible for \r
+ freeing the buffer.\r
+ @retval NULL The variable was not read.\r
\r
**/\r
VOID *\r
/**\r
This function prints a series of strings.\r
\r
- @param ConOut Pointer to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL\r
- @param ... A variable argument list containing series of\r
+ @param ConOut A pointer to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.\r
+ @param ... A variable argument list containing a series of\r
strings, the last string must be NULL.\r
\r
- @retval EFI_SUCCESS Success print out the string using ConOut.\r
+ @retval EFI_SUCCESS Successfully printed out the string using ConOut.\r
@retval EFI_STATUS Return the status of the ConOut->OutputString ().\r
\r
**/\r
);\r
\r
/**\r
- Build the boot#### or driver#### option from the VariableName, the\r
+ Build the boot#### or driver#### option from the VariableName. The\r
build boot#### or driver#### will also be linked to BdsCommonOptionList.\r
\r
@param BdsCommonOptionList The header of the boot#### or driver#### option\r
- link list\r
- @param VariableName EFI Variable name indicate if it is boot#### or\r
- driver####\r
+ link list.\r
+ @param VariableName EFI Variable name, indicates if it is boot#### or\r
+ driver####.\r
\r
- @retval BDS_COMMON_OPTION Get the option just been created\r
- @retval NULL Failed to get the new option\r
+ @retval BDS_COMMON_OPTION The option that was created.\r
+ @retval NULL Failed to get the new option.\r
\r
**/\r
BDS_COMMON_OPTION *\r
);\r
\r
/**\r
- This function will register the new boot#### or driver#### option base on\r
+ This function registers the new boot#### or driver#### option based on\r
the VariableName. The new registered boot#### or driver#### will be linked\r
to BdsOptionList and also update to the VariableName. After the boot#### or\r
driver#### updated, the BootOrder or DriverOrder will also be updated.\r
\r
- @param BdsOptionList The header of the boot#### or driver#### link list\r
- @param DevicePath The device path which the boot#### or driver####\r
- option present\r
- @param String The description of the boot#### or driver####\r
- @param VariableName Indicate if the boot#### or driver#### option\r
+ @param BdsOptionList The header of the boot#### or driver#### link list.\r
+ @param DevicePath The device path that the boot#### or driver####\r
+ option present.\r
+ @param String The description of the boot#### or driver####.\r
+ @param VariableName Indicate if the boot#### or driver#### option.\r
\r
- @retval EFI_SUCCESS The boot#### or driver#### have been success\r
- registered\r
+ @retval EFI_SUCCESS The boot#### or driver#### have been successfully\r
+ registered.\r
@retval EFI_STATUS Return the status of gRT->SetVariable ().\r
\r
**/\r
);\r
\r
//\r
-// Bds connect or disconnect driver lib funcion\r
+// Bds connect and disconnect driver lib funcions\r
//\r
/**\r
- Connects all drivers to all controllers.\r
- This function make sure all the current system driver will manage\r
- the correspoinding controllers if have. And at the same time, make\r
- sure all the system controllers have driver to manage it if have.\r
+ This function connects all system drivers with the corresponding controllers. \r
\r
**/\r
VOID\r
);\r
\r
/**\r
- This function will connect all the system driver to controller\r
- first, and then special connect the default console, this make\r
- sure all the system controller available and the platform default\r
- console connected.\r
+ This function connects all system drivers to controllers.\r
\r
**/\r
VOID\r
/**\r
This function will create all handles associate with every device\r
path node. If the handle associate with one device path node can not\r
- be created success, then still give one chance to do the dispatch,\r
+ be created successfully, then still give chance to do the dispatch,\r
which load the missing drivers if possible.\r
\r
- @param DevicePathToConnect The device path which will be connected, it can be\r
- a multi-instance device path\r
+ @param DevicePathToConnect The device path to be connected. Can be\r
+ a multi-instance device path.\r
\r
- @retval EFI_SUCCESS All handles associate with every device path node\r
- have been created\r
- @retval EFI_OUT_OF_RESOURCES There is no resource to create new handles\r
- @retval EFI_NOT_FOUND Create the handle associate with one device path\r
- node failed\r
+ @retval EFI_SUCCESS All handles associates with every device path node\r
+ were created.\r
+ @retval EFI_OUT_OF_RESOURCES Not enough resources to create new handles.\r
+ @retval EFI_NOT_FOUND At least one handle could not be created.\r
\r
**/\r
EFI_STATUS\r
);\r
\r
/**\r
- This function will connect all current system handles recursively. The\r
- connection will finish until every handle's child handle created if it have.\r
-\r
- @retval EFI_SUCCESS All handles and it's child handle have been\r
- connected\r
+ This function will connect all current system handles recursively. \r
+ gBS->ConnectController() service is invoked for each handle exist in system handler buffer. \r
+ If the handle is bus type handler, all childrens also will be connected recursively by gBS->ConnectController().\r
+ \r
+ @retval EFI_SUCCESS All handles and child handles have been\r
+ connected. \r
@retval EFI_STATUS Return the status of gBS->LocateHandleBuffer().\r
-\r
**/\r
EFI_STATUS\r
EFIAPI\r
VOID\r
);\r
\r
-\r
/**\r
- This function will disconnect all current system handles. The disconnection\r
- will finish until every handle have been disconnected.\r
-\r
- @retval EFI_SUCCESS All handles have been disconnected\r
- @retval EFI_STATUS Return the status of gBS->LocateHandleBuffer().\r
+ This function will disconnect all current system handles. \r
+ gBS->DisconnectController() is invoked for each handle exists in system handle buffer. \r
+ If handle is a bus type handle, all childrens also are disconnected recursively by gBS->DisconnectController().\r
+ \r
+ @retval EFI_SUCCESS All handles have been disconnected.\r
+ @retval EFI_STATUS Error status returned by of gBS->LocateHandleBuffer().\r
\r
**/\r
EFI_STATUS\r
// Bds console related lib functions\r
//\r
/**\r
- This function will search every simpletxt devive in current system,\r
- and make every simpletxt device as pertantial console device.\r
+ This function will search every simpletxt device in the current system,\r
+ and make every simpletxt device a potential console device.\r
\r
**/\r
VOID\r
\r
\r
/**\r
- This function will connect console device base on the console\r
+ This function will connect console device based on the console\r
device variable ConIn, ConOut and ErrOut.\r
\r
- @retval EFI_SUCCESS At least one of the ConIn and ConOut device have\r
- been connected success.\r
+ @retval EFI_SUCCESS At least one of the ConIn and ConOut devices have\r
+ been connected.\r
@retval EFI_STATUS Return the status of BdsLibConnectConsoleVariable ().\r
\r
**/\r
VOID\r
);\r
\r
+\r
+/**\r
+ This function will connect console device except ConIn base on the console\r
+ device variable ConOut and ErrOut.\r
+\r
+ @retval EFI_SUCCESS At least one of the ConOut device have\r
+ been connected success.\r
+ @retval EFI_STATUS Return the status of BdsLibConnectConsoleVariable ().\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+BdsLibConnectAllDefaultConsolesWithOutConIn (\r
+ VOID\r
+ );\r
+\r
+\r
/**\r
- This function update console variable based on ConVarName, it can\r
+ This function updates the console variable based on ConVarName. It can\r
add or remove one specific console device path from the variable\r
\r
- @param ConVarName Console related variable name, ConIn, ConOut,\r
+ @param ConVarName The console-related variable name: ConIn, ConOut,\r
ErrOut.\r
- @param CustomizedConDevicePath The console device path which will be added to\r
- the console variable ConVarName, this parameter\r
- can not be multi-instance.\r
- @param ExclusiveDevicePath The console device path which will be removed\r
- from the console variable ConVarName, this\r
- parameter can not be multi-instance.\r
-\r
- @retval EFI_UNSUPPORTED The added device path is same to the removed one.\r
- @retval EFI_SUCCESS Success add or remove the device path from the\r
+ @param CustomizedConDevicePath The console device path to be added to\r
+ the console variable ConVarName. Cannot be multi-instance.\r
+ @param ExclusiveDevicePath The console device path to be removed\r
+ from the console variable ConVarName. Cannot be multi-instance.\r
+\r
+ @retval EFI_UNSUPPORTED The added device path is the same as a removed one.\r
+ @retval EFI_SUCCESS Successfully added or removed the device path from the\r
console variable.\r
\r
**/\r
\r
/**\r
Connect the console device base on the variable ConVarName, if\r
- device path of the ConVarName is multi-instance device path, if\r
+ device path of the ConVarName is multi-instance device path and\r
anyone of the instances is connected success, then this function\r
will return success.\r
+ If the handle associate with one device path node can not\r
+ be created successfully, then still give chance to do the dispatch,\r
+ which load the missing drivers if possible.\r
\r
@param ConVarName Console related variable name, ConIn, ConOut,\r
ErrOut.\r
IN CHAR16 *ConVarName\r
);\r
\r
+/**\r
+ Connect the console device base on the variable ConVarName, if\r
+ device path of the ConVarName is multi-instance device path and\r
+ anyone of the instances is connected success, then this function\r
+ will return success. \r
+ Dispatch service is not called when the handle associate with one \r
+ device path node can not be created successfully. Here no driver \r
+ dependency is assumed exist, so need not to call this service.\r
+\r
+ @param ConVarName Console related variable name, ConIn, ConOut,\r
+ ErrOut.\r
+\r
+ @retval EFI_NOT_FOUND There is not any console devices connected\r
+ success\r
+ @retval EFI_SUCCESS Success connect any one instance of the console\r
+ device path base on the variable ConVarName.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+BdsLibConnectConsoleVariableWithOutDispatch (\r
+ IN CHAR16 *ConVarName\r
+ );\r
+\r
//\r
// Bds device path related lib functions\r
//\r
/**\r
- Delete the instance in Multi which matches partly with Single instance\r
+ Delete the instance in Multi that overlaps with Single. \r
\r
@param Multi A pointer to a multi-instance device path data\r
structure.\r
@param Single A pointer to a single-instance device path data\r
structure.\r
\r
- @return This function will remove the device path instances in Multi which partly\r
- match with the Single, and return the result device path. If there is no\r
+ @return This function removes the device path instances in Multi that overlap\r
+ Single, and returns the resulting device path. If there is no\r
remaining device path as a result, this function will return NULL.\r
\r
**/\r
);\r
\r
/**\r
- Function compares a device path data structure to that of all the nodes of a\r
+ This function compares a device path data structure to that of all the nodes of a\r
second device path instance.\r
\r
@param Multi A pointer to a multi-instance device path data\r
@param Single A pointer to a single-instance device path data\r
structure.\r
\r
- @retval TRUE If the Single device path is contained within Multi device path.\r
- @retval FALSE The Single device path is not match within Multi device path.\r
+ @retval TRUE If the Single device path is contained within a \r
+ Multi device path.\r
+ @retval FALSE The Single device path is not contained within a \r
+ Multi device path.\r
\r
**/\r
BOOLEAN\r
\r
@param DevPath A pointer to the device path structure.\r
\r
- @return A new allocated Unicode string that represents the device path.\r
+ @return A newly allocated Unicode string that represents the device path.\r
\r
**/\r
CHAR16 *\r
IN EFI_DEVICE_PATH_PROTOCOL *DevPath\r
);\r
\r
-\r
//\r
// Internal definitions\r
//\r
typedef struct {\r
- CHAR16 *str;\r
- UINTN len;\r
- UINTN maxlen;\r
+ CHAR16 *Str;\r
+ UINTN Len;\r
+ UINTN Maxlen;\r
} POOL_PRINT;\r
\r
+typedef\r
+VOID\r
+(*DEV_PATH_FUNCTION) (\r
+ IN OUT POOL_PRINT *Str,\r
+ IN VOID *DevPath\r
+ );\r
+\r
typedef struct {\r
- UINT8 Type;\r
- UINT8 SubType;\r
- VOID (*Function) (POOL_PRINT *, VOID *);\r
+ UINT8 Type;\r
+ UINT8 SubType;\r
+ DEV_PATH_FUNCTION Function;\r
} DEVICE_PATH_STRING_TABLE;\r
\r
-extern EFI_GUID mEfiDevicePathMessagingUartFlowControlGuid;\r
-\r
typedef struct {\r
EFI_DEVICE_PATH_PROTOCOL Header;\r
EFI_GUID Guid;\r
UINT8 VendorDefinedData[1];\r
} VENDOR_DEVICE_PATH_WITH_DATA;\r
\r
-\r
-extern EFI_GUID mEfiDevicePathMessagingSASGuid;\r
-\r
typedef struct {\r
EFI_DEVICE_PATH_PROTOCOL Header;\r
UINT16 NetworkProtocol;\r
UINT16 LoginOption;\r
UINT64 Lun;\r
UINT16 TargetPortalGroupTag;\r
- CHAR16 iSCSITargetName[1];\r
+ CHAR16 TargetName[1];\r
} ISCSI_DEVICE_PATH_WITH_NAME;\r
\r
-\r
-//\r
-// Notes: EFI 64 shadow all option rom\r
-//\r
-#if defined (MDE_CPU_IPF)\r
-#define EFI64_SHADOW_ALL_LEGACY_ROM() ShadowAllOptionRom ();\r
-#else\r
-#define EFI64_SHADOW_ALL_LEGACY_ROM()\r
-#endif\r
-\r
-/**\r
- Shadow all Legacy OptionRom. \r
-\r
-**/\r
-VOID\r
-EFIAPI\r
-ShadowAllOptionRom (\r
- VOID\r
- );\r
-\r
//\r
// BBS support macros and functions\r
//\r
/**\r
Delete all the invalid legacy boot options.\r
\r
- @retval EFI_SUCCESS All invalide legacy boot options are deleted.\r
- @retval EFI_OUT_OF_RESOURCES Fail to allocate necessary memory.\r
- @retval EFI_NOT_FOUND Fail to retrive variable of boot order.\r
+ @retval EFI_SUCCESS All invalid legacy boot options are deleted.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate necessary memory.\r
+ @retval EFI_NOT_FOUND Failed to retrieve variable of boot order.\r
\r
**/\r
EFI_STATUS\r
);\r
\r
/**\r
-\r
Add the legacy boot options from BBS table if they do not exist.\r
\r
- @retval EFI_SUCCESS The boot options are added successfully \r
- or they are already in boot options.\r
-\r
+ @retval EFI_SUCCESS The boot options were added successfully, \r
+ or they are already in boot options.\r
+ @retval EFI_NOT_FOUND No legacy boot options is found.\r
+ @retval EFI_OUT_OF_RESOURCE No enough memory.\r
+ @return Other value LegacyBoot options are not added.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
-\r
Add the legacy boot devices from BBS table into \r
the legacy device boot order.\r
\r
- @retval EFI_SUCCESS The boot devices are added successfully.\r
-\r
+ @retval EFI_SUCCESS The boot devices were added successfully.\r
+ @retval EFI_NOT_FOUND The legacy boot devices are not found.\r
+ @retval EFI_OUT_OF_RESOURCES Memory or storage is not enough.\r
+ @retval EFI_DEVICE_ERROR Failed to add the legacy device boot order into EFI variable\r
+ because of a hardware error.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
+ Refresh the boot priority for BBS entries based on boot option entry and boot order.\r
\r
- Set the boot priority for BBS entries based on boot option entry and boot order.\r
-\r
- @param Entry The boot option is to be checked for refresh BBS table.\r
+ @param Entry The boot option is to be checked for a refreshed BBS table.\r
\r
- @retval EFI_SUCCESS The boot priority for BBS entries is refreshed successfully.\r
-\r
+ @retval EFI_SUCCESS The boot priority for BBS entries refreshed successfully.\r
+ @retval EFI_NOT_FOUND BBS entries can't be found.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to get the legacy device boot order.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
+ Delete the Boot Option from EFI Variable. The Boot Order Arrray\r
+ is also updated.\r
\r
- Delete boot option specified by OptionNumber and adjust the boot order.\r
-\r
- @param OptionNumber The boot option to be deleted.\r
- @param BootOrder Boot order list to be adjusted by remove this boot option.\r
- @param BootOrderSize The size of Boot order list will be modified.\r
- \r
- @retval EFI_SUCCESS The boot option is deleted successfully.\r
+ @param OptionNumber The number of Boot options wanting to be deleted.\r
+ @param BootOrder The Boot Order array.\r
+ @param BootOrderSize The size of the Boot Order Array.\r
\r
+ @retval EFI_SUCCESS The Boot Option Variable was found and removed.\r
+ @retval EFI_UNSUPPORTED The Boot Option Variable store was inaccessible.\r
+ @retval EFI_NOT_FOUND The Boot Option Variable was not found.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
//\r
-//The interface functions relate with Setup Browser Reset Reminder feature\r
+//The interface functions related to the Setup Browser Reset Reminder feature\r
//\r
/**\r
Enable the setup browser reset reminder feature.\r
- This routine is used in platform tip. If the platform policy need the feature, use the routine to enable it.\r
+ This routine is used in a platform tip. If the platform policy needs the feature, use the routine to enable it.\r
\r
**/\r
VOID\r
\r
/**\r
Disable the setup browser reset reminder feature.\r
- This routine is used in platform tip. If the platform policy do not want the feature, use the routine to disable it.\r
+ This routine is used in a platform tip. If the platform policy does not want the feature, use the routine to disable it.\r
\r
**/\r
VOID\r
);\r
\r
/**\r
- Record the info that a reset is required.\r
- A module boolean variable is used to record whether a reset is required.\r
+ Record the info that a reset is required.\r
+ A module boolean variable is used to record whether a reset is required.\r
\r
**/\r
VOID\r
\r
\r
/**\r
- Record the info that no reset is required.\r
- A module boolean variable is used to record whether a reset is required.\r
+ Record the info that no reset is required.\r
+ A module boolean variable is used to record whether a reset is required.\r
\r
**/\r
VOID\r
);\r
\r
/**\r
- Check whether platform policy enable the reset reminder feature. The default is enabled.\r
+ Check whether platform policy enables the reset reminder feature. The default is enabled.\r
\r
**/\r
BOOLEAN\r
);\r
\r
/**\r
- Check if user changed any option setting which needs a system reset to be effective.\r
+ Check if the user changed any option setting that needs a system reset to be effective.\r
\r
**/\r
BOOLEAN\r
\r
/**\r
Check whether a reset is needed, and finish the reset reminder feature.\r
- If a reset is needed, Popup a menu to notice user, and finish the feature\r
+ If a reset is needed, pop up a menu to notice user, and finish the feature\r
according to the user selection.\r
\r
**/\r
);\r
\r
\r
-//\r
-// Define the boot option default description \r
-// NOTE: This is not defined in UEFI spec.\r
-//\r
-#define DESCRIPTION_FLOPPY L"EFI Floppy"\r
-#define DESCRIPTION_FLOPPY_NUM L"EFI Floppy %d"\r
-#define DESCRIPTION_DVD L"EFI DVD/CDROM"\r
-#define DESCRIPTION_DVD_NUM L"EFI DVD/CDROM %d"\r
-#define DESCRIPTION_USB L"EFI USB Device"\r
-#define DESCRIPTION_USB_NUM L"EFI USB Device %d"\r
-#define DESCRIPTION_SCSI L"EFI SCSI Device"\r
-#define DESCRIPTION_SCSI_NUM L"EFI SCSI Device %d"\r
-#define DESCRIPTION_MISC L"EFI Misc Device"\r
-#define DESCRIPTION_MISC_NUM L"EFI Misc Device %d"\r
-#define DESCRIPTION_NETWORK L"EFI Network"\r
-#define DESCRIPTION_NETWORK_NUM L"EFI Network %d" \r
-#define DESCRIPTION_NON_BLOCK L"EFI Non-Block Boot Device"\r
-#define DESCRIPTION_NON_BLOCK_NUM L"EFI Non-Block Boot Device %d"\r
+///\r
+/// Define the boot type with which to classify the boot option type.\r
+/// Different boot option types could have different boot behaviors.\r
+/// Use their device path node (Type + SubType) as the type value.\r
+/// The boot type here can be added according to requirements.\r
+///\r
\r
-//\r
-// Define the boot type which to classify the boot option type\r
-// Different boot option type could have different boot behavior\r
-// Use their device path node (Type + SubType) as type value\r
-// The boot type here can be added according to requirement\r
-//\r
-//\r
-// ACPI boot type. For ACPI device, cannot use sub-type to distinguish device, so hardcode their value\r
-//\r
+///\r
+/// ACPI boot type. For ACPI devices, using sub-types to distinguish devices is not allowed, so hardcode their values.\r
+///\r
#define BDS_EFI_ACPI_FLOPPY_BOOT 0x0201\r
-//\r
-// Message boot type\r
-// If a device path of boot option only point to a message node, the boot option is message boot type\r
-//\r
+///\r
+/// Message boot type\r
+/// If a device path of boot option only points to a message node, the boot option is a message boot type.\r
+///\r
#define BDS_EFI_MESSAGE_ATAPI_BOOT 0x0301 // Type 03; Sub-Type 01\r
#define BDS_EFI_MESSAGE_SCSI_BOOT 0x0302 // Type 03; Sub-Type 02\r
#define BDS_EFI_MESSAGE_USB_DEVICE_BOOT 0x0305 // Type 03; Sub-Type 05\r
-#define BDS_EFI_MESSAGE_SATA_BOOT 0x0318 // Type 03; Sub-Type 18\r
+#define BDS_EFI_MESSAGE_SATA_BOOT 0x0312 // Type 03; Sub-Type 18\r
+#define BDS_EFI_MESSAGE_MAC_BOOT 0x030b // Type 03; Sub-Type 11\r
#define BDS_EFI_MESSAGE_MISC_BOOT 0x03FF\r
-//\r
-// Media boot type\r
-// If a device path of boot option contain a media node, the boot option is media boot type\r
-//\r
+\r
+///\r
+/// Media boot type\r
+/// If a device path of boot option contains a media node, the boot option is media boot type.\r
+///\r
#define BDS_EFI_MEDIA_HD_BOOT 0x0401 // Type 04; Sub-Type 01\r
#define BDS_EFI_MEDIA_CDROM_BOOT 0x0402 // Type 04; Sub-Type 02\r
-//\r
-// BBS boot type\r
-// If a device path of boot option contain a BBS node, the boot option is BBS boot type\r
-//\r
+///\r
+/// BBS boot type\r
+/// If a device path of boot option contains a BBS node, the boot option is BBS boot type.\r
+///\r
#define BDS_LEGACY_BBS_BOOT 0x0501 // Type 05; Sub-Type 01\r
\r
#define BDS_EFI_UNSUPPORT 0xFFFF\r
\r
-//\r
-// USB host controller Programming Interface.\r
-//\r
-#define PCI_CLASSC_PI_UHCI 0x00\r
-#define PCI_CLASSC_PI_EHCI 0x20\r
-\r
/**\r
- Check whether there is a instance in BlockIoDevicePath, which contain multi device path\r
- instances, has the same partition node with HardDriveDevicePath device path\r
+ Check whether an instance in BlockIoDevicePath has the same partition node as the HardDriveDevicePath device path.\r
\r
- @param BlockIoDevicePath Multi device path instances which need to check\r
- @param HardDriveDevicePath A device path which starts with a hard drive media\r
+ @param BlockIoDevicePath Multi device path instances to check.\r
+ @param HardDriveDevicePath A device path starting with a hard drive media\r
device path.\r
\r
@retval TRUE There is a matched device path instance.\r
\r
/**\r
Expand a device path that starts with a hard drive media device path node to be a\r
- full device path that includes the full hardware path to the device. We need\r
- to do this so it can be booted. As an optimizaiton the front match (the part point\r
- to the partition node. E.g. ACPI() /PCI()/ATA()/Partition() ) is saved in a variable\r
- so a connect all is not required on every boot. All successful history device path\r
- which point to partition node (the front part) will be saved.\r
+ full device path that includes the full hardware path to the device. This function enables the device to boot. \r
+ To avoid requiring a connect on every boot, the front match is saved in a variable (the part point\r
+ to the partition node. E.g. ACPI() /PCI()/ATA()/Partition() ).\r
+ All successful history device paths\r
+ that point to the front part of the partition node will be saved.\r
\r
@param HardDriveDevicePath EFI Device Path to boot, if it starts with a hard\r
drive media device path.\r
- @return A Pointer to the full device path or NULL if a valid Hard Drive devic path\r
+ @return A Pointer to the full device path, or NULL if a valid Hard Drive devic path\r
cannot be found.\r
\r
**/\r
\r
/**\r
Return the bootable media handle.\r
- First, check the device is connected\r
- Second, check whether the device path point to a device which support SimpleFileSystemProtocol,\r
+ First, check whether the device is connected.\r
+ Second, check whether the device path points to a device that supports SimpleFileSystemProtocol.\r
Third, detect the the default boot file in the Media, and return the removable Media handle.\r
\r
- @param DevicePath Device Path to a bootable device\r
+ @param DevicePath The Device Path to a bootable device.\r
\r
- @retval NULL The media on the DevicePath is not bootable\r
+ @return The bootable media handle. If the media on the DevicePath is not bootable, NULL will return.\r
\r
**/\r
EFI_HANDLE\r
\r
\r
/**\r
- Check whether the Device path in a boot option point to a valide bootable device,\r
- And if CheckMedia is true, check the device is ready to boot now.\r
+ Checks whether the Device path in a boot option points to a valid bootable device, and if the device\r
+ is ready to boot now.\r
\r
- @param DevPath the Device path in a boot option\r
- @param CheckMedia if true, check the device is ready to boot now.\r
+ @param DevPath The Device path in a boot option.\r
+ @param CheckMedia If true, check whether the device is ready to boot now.\r
\r
- @retval TRUE the Device path is valide\r
- @retval FALSE the Device path is invalide .\r
+ @retval TRUE The Device path is valid.\r
+ @retval FALSE The Device path is invalid.\r
\r
**/\r
BOOLEAN\r
);\r
\r
/**\r
- Check whether the Device path in a boot option point to a valid bootable device,\r
- And if CheckMedia is true, check the device is ready to boot now.\r
- If Description is not NULL and the device path point to a fixed BlockIo\r
- device, check the description whether conflict with other auto-created\r
+ Checks whether the Device path in a boot option points to a valid bootable device, and if the device\r
+ is ready to boot now.\r
+ If Description is not NULL and the device path points to a fixed BlockIo\r
+ device, this function checks whether the description conflicts with other auto-created\r
boot options.\r
\r
- @param DevPath the Device path in a boot option\r
- @param CheckMedia if true, check the device is ready to boot now.\r
- @param Description the description in a boot option\r
+ @param DevPath The Device path in a boot option.\r
+ @param CheckMedia If true, checks if the device is ready to boot now.\r
+ @param Description The description of a boot option.\r
\r
- @retval TRUE the Device path is valid\r
- @retval FALSE the Device path is invalid .\r
+ @retval TRUE The Device path is valid.\r
+ @retval FALSE The Device path is invalid.\r
\r
**/\r
BOOLEAN\r
/**\r
For a bootable Device path, return its boot type.\r
\r
- @param DevicePath The bootable device Path to check\r
-\r
- @retval BDS_EFI_MEDIA_HD_BOOT If the device path contains any media deviec path node, it is media boot type\r
- For the floppy node, handle it as media node\r
- @retval BDS_EFI_MEDIA_CDROM_BOOT If the device path contains any media deviec path node, it is media boot type\r
- For the floppy node, handle it as media node\r
- @retval BDS_EFI_ACPI_FLOPPY_BOOT If the device path contains any media deviec path node, it is media boot type\r
- For the floppy node, handle it as media node\r
- @retval BDS_EFI_MESSAGE_ATAPI_BOOT If the device path not contains any media deviec path node, and\r
- its last device path node point to a message device path node, it is\r
- \r
- @retval BDS_EFI_MESSAGE_SCSI_BOOT If the device path not contains any media deviec path node, and\r
- its last device path node point to a message device path node, it is\r
- @retval BDS_EFI_MESSAGE_USB_DEVICE_BOOT If the device path not contains any media deviec path node, and\r
- its last device path node point to a message device path node, it is\r
- @retval BDS_EFI_MESSAGE_MISC_BOOT If the device path not contains any media deviec path node, and\r
- its last device path node point to a message device path node, it is\r
- @retval BDS_LEGACY_BBS_BOOT Legacy boot type\r
- @retval BDS_EFI_UNSUPPORT An EFI Removable BlockIO device path not point to a media and message devie, \r
-\r
-**/\r
+ @param DevicePath The bootable device Path to check.\r
+\r
+ @retval BDS_EFI_MEDIA_HD_BOOT The given device path contains MEDIA_DEVICE_PATH type device path node,\r
+ whose subtype is MEDIA_HARDDRIVE_DP. \r
+ @retval BDS_EFI_MEDIA_CDROM_BOOT If given device path contains MEDIA_DEVICE_PATH type device path node, \r
+ whose subtype is MEDIA_CDROM_DP. \r
+ @retval BDS_EFI_ACPI_FLOPPY_BOOT A given device path contains ACPI_DEVICE_PATH type device path node, \r
+ whose HID is floppy device. \r
+ @retval BDS_EFI_MESSAGE_ATAPI_BOOT A given device path contains MESSAGING_DEVICE_PATH type device path node, \r
+ and its last device path node's subtype is MSG_ATAPI_DP. \r
+ @retval BDS_EFI_MESSAGE_SCSI_BOOT A given device path contains MESSAGING_DEVICE_PATH type device path node,\r
+ and its last device path node's subtype is MSG_SCSI_DP. \r
+ @retval BDS_EFI_MESSAGE_USB_DEVICE_BOOT A given device path contains MESSAGING_DEVICE_PATH type device path node, \r
+ and its last device path node's subtype is MSG_USB_DP.\r
+ @retval BDS_EFI_MESSAGE_MISC_BOOT The device path does not contain any media device path node, and \r
+ its last device path node points to a message device path node. \r
+ @retval BDS_LEGACY_BBS_BOOT A given device path contains BBS_DEVICE_PATH type device path node. \r
+ @retval BDS_EFI_UNSUPPORT An EFI Removable BlockIO device path does not point to a media and message device. \r
+\r
+ **/\r
UINT32\r
EFIAPI\r
BdsGetBootTypeFromDevicePath (\r
\r
\r
/**\r
- This routine register a function to adjust the different type memory page number\r
- just before booting and save the updated info into the variable for next boot to use.\r
+ This routine registers a function to adjust the different types of memory page numbers\r
+ just before booting, and saves the updated info into the variable for the next boot to use.\r
\r
**/\r
VOID\r
VOID\r
);\r
\r
+/**\r
+ Identify a user and, if authenticated, returns the current user profile handle.\r
+\r
+ @param[out] User Points to the user profile handle.\r
+ \r
+ @retval EFI_SUCCESS The user is successfully identified, or user identification\r
+ is not supported.\r
+ @retval EFI_ACCESS_DENIED The user was not successfully identified.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+BdsLibUserIdentify (\r
+ OUT EFI_USER_PROFILE_HANDLE *User\r
+ ); \r
\r
/**\r
- According to a file guild, check a Fv file device path is valid. If it is invalid,\r
- try to return the valid device path.\r
+ This function checks if a Fv file device path is valid, according to a file GUID. If it is invalid,\r
+ it tries to return the valid device path.\r
FV address maybe changes for memory layout adjust from time to time, use this funciton\r
could promise the Fv file device path is right.\r
\r
- @param DevicePath on input, the Fv file device path need to check on\r
+ @param DevicePath On input, the Fv file device path to check. On\r
output, the updated valid Fv file device path\r
- @param FileGuid the Fv file guild\r
+ @param FileGuid the Fv file GUID.\r
\r
- @retval EFI_INVALID_PARAMETER the input DevicePath or FileGuid is invalid\r
- parameter\r
- @retval EFI_UNSUPPORTED the input DevicePath does not contain Fv file\r
- guild at all\r
- @retval EFI_ALREADY_STARTED the input DevicePath has pointed to Fv file, it is\r
- valid\r
- @retval EFI_SUCCESS has successfully updated the invalid DevicePath,\r
- and return the updated device path in DevicePath\r
+ @retval EFI_INVALID_PARAMETER The input DevicePath or FileGuid is invalid.\r
+ @retval EFI_UNSUPPORTED The input DevicePath does not contain an Fv file\r
+ GUID at all.\r
+ @retval EFI_ALREADY_STARTED The input DevicePath has pointed to the Fv file and is\r
+ valid.\r
+ @retval EFI_SUCCESS Successfully updated the invalid DevicePath\r
+ and returned the updated device path in DevicePath.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- Connect the specific Usb device which match the short form device path,\r
- and whose bus is determined by Host Controller (Uhci or Ehci)\r
+ Connect the specific USB device that matches the RemainingDevicePath,\r
+ and whose bus is determined by Host Controller (Uhci or Ehci).\r
\r
@param HostControllerPI Uhci (0x00) or Ehci (0x20) or Both uhci and ehci\r
- (0xFF)\r
- @param RemainingDevicePath a short-form device path that starts with the first\r
+ (0xFF).\r
+ @param RemainingDevicePath A short-form device path that starts with the first\r
element being a USB WWID or a USB Class device\r
- path\r
+ path.\r
\r
@retval EFI_SUCCESS The specific Usb device is connected successfully.\r
@retval EFI_INVALID_PARAMETER Invalid HostControllerPi (not 0x00, 0x20 or 0xFF) \r
// The implementation of this function is provided by Platform code.\r
//\r
/**\r
- Convert Vendor device path to device name.\r
+ Convert Vendor device path to a device name.\r
\r
- @param Str The buffer store device name\r
- @param DevPath Pointer to vendor device path\r
+ @param Str The buffer storing device name.\r
+ @param DevPath The pointer to vendor device path.\r
\r
**/\r
VOID\r
);\r
\r
/**\r
- Concatenates a formatted unicode string to allocated pool.\r
+ Concatenates a formatted unicode string to an allocated pool.\r
The caller must free the resulting buffer.\r
\r
@param Str Tracks the allocated pool, size in use, and amount of pool allocated.\r
- @param fmt The format string\r
+ @param Fmt The format string.\r
@param ... The data will be printed.\r
\r
@return Allocated buffer with the formatted string printed in it.\r
EFIAPI\r
CatPrint (\r
IN OUT POOL_PRINT *Str,\r
- IN CHAR16 *fmt,\r
+ IN CHAR16 *Fmt,\r
...\r
);\r
\r
/**\r
- Use Console Control to turn off UGA based Simple Text Out consoles from going\r
- to the UGA device. Put up LogoFile on every UGA device that is a console\r
+ Use SystemTable ConOut to stop video based Simple Text Out consoles from going\r
+ to the video device. Put up LogoFile on every video device that is a console.\r
\r
- @param[in] LogoFile File name of logo to display on the center of the screen.\r
+ @param[in] LogoFile The file name of logo to display on the center of the screen.\r
\r
@retval EFI_SUCCESS ConsoleControl has been flipped to graphics and logo displayed.\r
- @retval EFI_UNSUPPORTED Logo not found\r
+ @retval EFI_UNSUPPORTED Logo not found.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- Use Console Control to turn on UGA based Simple Text Out consoles. The UGA \r
- Simple Text Out screens will now be synced up with all non UGA output devices\r
+ Use SystemTable ConOut to turn on video based Simple Text Out consoles. The \r
+ Simple Text Out screens will now be synced up with all non-video output devices.\r
\r
@retval EFI_SUCCESS UGA devices are back in text mode and synced up.\r
\r
VOID\r
);\r
\r
-/**\r
- Use Console Control Protocol to lock the Console In Spliter virtual handle. \r
- This is the ConInHandle and ConIn handle in the EFI system table. All key\r
- presses will be ignored until the Password is typed in. The only way to\r
- disable the password is to type it in to a ConIn device.\r
-\r
- @param Password Password used to lock ConIn device.\r
-\r
- @retval EFI_SUCCESS lock the Console In Spliter virtual handle successfully.\r
- @retval EFI_UNSUPPORTED Password not found\r
-\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-LockKeyboards (\r
- IN CHAR16 *Password\r
- );\r
-\r
#endif\r
\r