#\r
# This package provides network modules that conform to UEFI 2.4 specification.\r
#\r
-# (C) Copyright 2015 Hewlett-Packard Development Company, L.P.<BR>\r
# Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>\r
+# (C) Copyright 2015-2017 Hewlett Packard Enterprise Development LP<BR>\r
#\r
# This program and the accompanying materials are licensed and made available under\r
# the terms and conditions of the BSD License which accompanies this distribution.\r
\r
# Include/Guid/TlsAuthentication.h\r
gEfiTlsCaCertificateGuid = { 0xfd2340D0, 0x3dab, 0x4349, { 0xa6, 0xc7, 0x3b, 0x4f, 0x12, 0xb4, 0x8e, 0xae }}\r
- \r
+\r
+[PcdsFixedAtBuild]\r
+ ## The max attempt number will be created by iSCSI driver.\r
+ # @Prompt Max attempt number.\r
+ gEfiNetworkPkgTokenSpaceGuid.PcdMaxIScsiAttemptNumber|0x08|UINT8|0x0000000D\r
\r
[PcdsFeatureFlag]\r
## Indicates if the IPsec IKEv2 Certificate Authentication feature is enabled or not.<BR><BR>\r
gEfiNetworkPkgTokenSpaceGuid.PcdDhcp6UidType|4|UINT8|0x10000001\r
\r
## Network boot policy to stop UEFI iSCSI if applicable.\r
- # 0x00 = Always use UEFI iSCSI and ignore AIP.\r
+ # 0x00 = Always use UEFI iSCSI and ignore iSCSI HBA.\r
# 0x01 = Stop UEFI iSCSI if iSCSI HBA adapter produces AIP protocol with Network Boot.\r
# 0x02 = Stop UEFI iSCSI if iSCSI HBA adapter supports booting from iSCSI IPv4 targets.\r
# 0x04 = Stop UEFI iSCSI if iSCSI HBA adapter supports booting from iSCSI IPv6 targets.\r
# 0x10 = Stop UEFI iSCSI if iSCSI HBA adapter supports multipath I/O for iSCSI boot.\r
# 0x20 = Stop UEFI iSCSI if iSCSI HBA adapter is currently configured to boot from iSCSI IPv4 targets.\r
# 0x40 = Stop UEFI iSCSI if iSCSI HBA adapter is currently configured to boot from iSCSI IPv6 targets.\r
+ # 0xFF = Always use iSCSI HBA and ignore UEFI iSCSI.\r
# @Prompt Type Value of network boot policy used in iSCSI.\r
gEfiNetworkPkgTokenSpaceGuid.PcdIScsiAIPNetworkBootPolicy|0x08|UINT8|0x10000007\r
\r