And to run a 64-bit UEFI bootable ISO image:\r
$ OvmfPkg/build.sh -a X64 qemu -cdrom /path/to/disk-image.iso\r
\r
-To build a 32-bit OVMF without debug messages using GCC 4.5:\r
-$ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC45\r
+To build a 32-bit OVMF without debug messages using GCC 4.8:\r
+$ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC48\r
\r
=== SMM support ===\r
\r
VirtioNetDxe | x\r
Intel BootUtil (X64) | x\r
\r
+=== HTTPS Boot ===\r
+\r
+HTTPS Boot is an alternative solution to PXE. It replaces the tftp server\r
+with a HTTPS server so the firmware can download the images through a trusted\r
+and encrypted connection.\r
+\r
+* To enable HTTPS Boot, you have to build OVMF with -D NETWORK_HTTP_BOOT_ENABLE\r
+ and -D NETWORK_TLS_ENABLE. The former brings in the HTTP stack from\r
+ NetworkPkg while the latter enables TLS support in both NetworkPkg and\r
+ CryptoPkg.\r
+\r
+ If you want to exclude the unsecured HTTP connection completely, OVMF has to\r
+ be built with -D NETWORK_ALLOW_HTTP_CONNECTIONS=FALSE so that only the HTTPS\r
+ connections will be accepted.\r
+\r
+* By default, there is no trusted certificate. The user has to import the\r
+ certificates either manually with "Tls Auth Configuration" utility in the\r
+ firmware UI or through the fw_cfg entry, etc/edk2/https/cacerts.\r
+\r
+ -fw_cfg name=etc/edk2/https/cacerts,file=<certdb>\r
+\r
+ The blob for etc/edk2/https/cacerts has to be in the format of Signature\r
+ Database(*1). You can use p11-kit(*2) or efisiglit(*3) to create the\r
+ certificate list.\r
+\r
+ If you want to create the certificate list based on the CA certificates\r
+ in your local host, p11-kit will be a good choice. Here is the command to\r
+ create the list:\r
+\r
+ p11-kit extract --format=edk2-cacerts --filter=ca-anchors \\r
+ --overwrite --purpose=server-auth <certdb>\r
+\r
+ If you only want to import one certificate, efisiglist is the tool for you:\r
+\r
+ efisiglist -a <cert file> -o <certdb>\r
+\r
+ Please note that the certificate has to be in the DER format.\r
+\r
+ You can also append a certificate to the existing list with the following\r
+ command:\r
+\r
+ efisiglist -i <old certdb> -a <cert file> -o <new certdb>\r
+\r
+ NOTE: You may need the patch to make efisiglist generate the correct header.\r
+ (https://github.com/rhboot/pesign/pull/40)\r
+\r
+* Besides the trusted certificates, it's also possible to configure the trusted\r
+ cipher suites for HTTPS through another fw_cfg entry: etc/edk2/https/ciphers.\r
+\r
+ -fw_cfg name=etc/edk2/https/ciphers,file=<cipher suites>\r
+\r
+ OVMF expects a binary UINT16 array which comprises the cipher suites HEX\r
+ IDs(*4). If the cipher suite list is given, OVMF will choose the cipher\r
+ suite from the intersection of the given list and the built-in cipher\r
+ suites. Otherwise, OVMF just chooses whatever proper cipher suites from the\r
+ built-in ones.\r
+\r
+ While the tool(*5) to create the cipher suite array is still under\r
+ development, the array can be generated with the following script:\r
+\r
+ export LC_ALL=C\r
+ openssl ciphers -V \\r
+ | sed -r -n \\r
+ -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \\r
+ | xargs -r -- printf -- '%b' > ciphers.bin\r
+\r
+ This script creates ciphers.bin that contains all the cipher suite IDs\r
+ supported by openssl according to the local host configuration.\r
+\r
+ You may want to enable only a limited set of cipher suites. Then, you\r
+ should check the validity of your list first:\r
+\r
+ openssl ciphers -V <cipher list>\r
+\r
+ If all the cipher suites in your list map to the proper HEX IDs, go ahead\r
+ to modify the script and execute it:\r
+\r
+ export LC_ALL=C\r
+ openssl ciphers -V <cipher list> \\r
+ | sed -r -n \\r
+ -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \\r
+ | xargs -r -- printf -- '%b' > ciphers.bin\r
+\r
+* In the future (after release 2.12), QEMU should populate both above fw_cfg\r
+ files automatically from the local host configuration, and enable the user\r
+ to override either with dedicated options or properties.\r
+\r
+(*1) See "31.4.1 Signature Database" in UEFI specification 2.7 errata A.\r
+(*2) p11-kit: https://github.com/p11-glue/p11-kit/\r
+(*3) efisiglist: https://github.com/rhboot/pesign/blob/master/src/efisiglist.c\r
+(*4) https://wiki.mozilla.org/Security/Server_Side_TLS#Cipher_names_correspondence_table\r
+(*5) update-crypto-policies: https://gitlab.com/redhat-crypto/fedora-crypto-policies\r
+\r
=== OVMF Flash Layout ===\r
\r
Like all current IA32/X64 system designs, OVMF's firmware device (rom/flash)\r
remaining OVMF firmware then uses this decompressed firmware\r
volume image.\r
\r
-=== UNIXGCC Debug ===\r
-\r
-If you build with the UNIXGCC toolchain, then debugging will be disabled\r
-due to larger image sizes being produced by the UNIXGCC toolchain. The\r
-first choice recommendation is to use GCC44 or newer instead.\r
-\r
-If you must use UNIXGCC, then you can override the build options for\r
-particular libraries and modules in the .dsc to re-enable debugging\r
-selectively. For example:\r
- [Components]\r
- OvmfPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf {\r
- <BuildOptions>\r
- GCC:*_*_*_CC_FLAGS = -UMDEPKG_NDEBUG\r
- }\r
- MdeModulePkg/Universal/BdsDxe/BdsDxe.inf {\r
- <BuildOptions>\r
- GCC:*_*_*_CC_FLAGS = -UMDEPKG_NDEBUG\r
- }\r
-\r
=== UEFI Windows 7 & Windows 2008 Server ===\r
\r
* One of the '-vga std' and '-vga qxl' QEMU options should be used.\r