]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blobdiff - drivers/bluetooth/hci_bcm.c
Bluetooth: hci_bcm: Add support for MINIX Z83-4 based devices
[mirror_ubuntu-bionic-kernel.git] / drivers / bluetooth / hci_bcm.c
index 101b17ae9aa758a22900681deb54685a2ae7d06c..16c2eaaaf72bad20ee4cd7304f46615744a6ec18 100644 (file)
 
 #define BCM_AUTOSUSPEND_DELAY  5000 /* default autosleep delay */
 
-/* platform device driver resources */
+/* device driver resources */
 struct bcm_device {
+       /* Must be the first member, hci_serdev.c expects this. */
+       struct hci_uart         serdev_hu;
        struct list_head        list;
 
        struct device           *dev;
@@ -76,11 +78,6 @@ struct bcm_device {
 #endif
 };
 
-/* serdev driver resources */
-struct bcm_serdev {
-       struct hci_uart hu;
-};
-
 /* generic bcm uart resources */
 struct bcm_data {
        struct sk_buff          *rx_skb;
@@ -155,6 +152,10 @@ static bool bcm_device_exists(struct bcm_device *device)
 {
        struct list_head *p;
 
+       /* Devices using serdev always exist */
+       if (device && device->hu && device->hu->serdev)
+               return true;
+
        list_for_each(p, &bcm_device_list) {
                struct bcm_device *dev = list_entry(p, struct bcm_device, list);
 
@@ -200,7 +201,6 @@ static int bcm_request_irq(struct bcm_data *bcm)
        struct bcm_device *bdev = bcm->dev;
        int err;
 
-       /* If this is not a platform device, do not enable PM functionalities */
        mutex_lock(&bcm_device_lock);
        if (!bcm_device_exists(bdev)) {
                err = -ENODEV;
@@ -313,18 +313,17 @@ static int bcm_open(struct hci_uart *hu)
 
        hu->priv = bcm;
 
-       /* If this is a serdev defined device, then only use
-        * serdev open primitive and skip the rest.
-        */
+       mutex_lock(&bcm_device_lock);
+
        if (hu->serdev) {
                serdev_device_open(hu->serdev);
+               bcm->dev = serdev_device_get_drvdata(hu->serdev);
                goto out;
        }
 
        if (!hu->tty->dev)
                goto out;
 
-       mutex_lock(&bcm_device_lock);
        list_for_each(p, &bcm_device_list) {
                struct bcm_device *dev = list_entry(p, struct bcm_device, list);
 
@@ -334,37 +333,45 @@ static int bcm_open(struct hci_uart *hu)
                 */
                if (hu->tty->dev->parent == dev->dev->parent) {
                        bcm->dev = dev;
-                       hu->init_speed = dev->init_speed;
-                       hu->oper_speed = dev->oper_speed;
 #ifdef CONFIG_PM
                        dev->hu = hu;
 #endif
-                       bcm_gpio_set_power(bcm->dev, true);
                        break;
                }
        }
 
-       mutex_unlock(&bcm_device_lock);
 out:
+       if (bcm->dev) {
+               hu->init_speed = bcm->dev->init_speed;
+               hu->oper_speed = bcm->dev->oper_speed;
+               bcm_gpio_set_power(bcm->dev, true);
+       }
+
+       mutex_unlock(&bcm_device_lock);
        return 0;
 }
 
 static int bcm_close(struct hci_uart *hu)
 {
        struct bcm_data *bcm = hu->priv;
-       struct bcm_device *bdev = bcm->dev;
+       struct bcm_device *bdev = NULL;
 
        bt_dev_dbg(hu->hdev, "hu %p", hu);
 
-       /* If this is a serdev defined device, only use serdev
-        * close primitive and then continue as usual.
-        */
-       if (hu->serdev)
-               serdev_device_close(hu->serdev);
-
        /* Protect bcm->dev against removal of the device or driver */
        mutex_lock(&bcm_device_lock);
-       if (bcm_device_exists(bdev)) {
+
+       if (hu->serdev) {
+               serdev_device_close(hu->serdev);
+               bdev = serdev_device_get_drvdata(hu->serdev);
+       } else if (bcm_device_exists(bcm->dev)) {
+               bdev = bcm->dev;
+#ifdef CONFIG_PM
+               bdev->hu = NULL;
+#endif
+       }
+
+       if (bdev) {
                bcm_gpio_set_power(bdev, false);
 #ifdef CONFIG_PM
                pm_runtime_disable(bdev->dev);
@@ -374,8 +381,6 @@ static int bcm_close(struct hci_uart *hu)
                        devm_free_irq(bdev->dev, bdev->irq, bdev);
                        device_init_wakeup(bdev->dev, false);
                }
-
-               bdev->hu = NULL;
 #endif
        }
        mutex_unlock(&bcm_device_lock);
@@ -558,7 +563,7 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
 #ifdef CONFIG_PM
 static int bcm_suspend_device(struct device *dev)
 {
-       struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+       struct bcm_device *bdev = dev_get_drvdata(dev);
 
        bt_dev_dbg(bdev, "");
 
@@ -581,7 +586,7 @@ static int bcm_suspend_device(struct device *dev)
 
 static int bcm_resume_device(struct device *dev)
 {
-       struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+       struct bcm_device *bdev = dev_get_drvdata(dev);
 
        bt_dev_dbg(bdev, "");
 
@@ -603,16 +608,18 @@ static int bcm_resume_device(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM_SLEEP
-/* Platform suspend callback */
+/* suspend callback */
 static int bcm_suspend(struct device *dev)
 {
-       struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+       struct bcm_device *bdev = dev_get_drvdata(dev);
        int error;
 
        bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
 
-       /* bcm_suspend can be called at any time as long as platform device is
-        * bound, so it should use bcm_device_lock to protect access to hci_uart
+       /*
+        * When used with a device instantiated as platform_device, bcm_suspend
+        * can be called at any time as long as the platform device is bound,
+        * so it should use bcm_device_lock to protect access to hci_uart
         * and device_wake-up GPIO.
         */
        mutex_lock(&bcm_device_lock);
@@ -635,15 +642,17 @@ unlock:
        return 0;
 }
 
-/* Platform resume callback */
+/* resume callback */
 static int bcm_resume(struct device *dev)
 {
-       struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+       struct bcm_device *bdev = dev_get_drvdata(dev);
 
        bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
 
-       /* bcm_resume can be called at any time as long as platform device is
-        * bound, so it should use bcm_device_lock to protect access to hci_uart
+       /*
+        * When used with a device instantiated as platform_device, bcm_resume
+        * can be called at any time as long as platform device is bound,
+        * so it should use bcm_device_lock to protect access to hci_uart
         * and device_wake-up GPIO.
         */
        mutex_lock(&bcm_device_lock);
@@ -717,6 +726,13 @@ static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = {
                        DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"),
                },
        },
+       {
+               .ident = "MINIX Z83-4",
+               .matches = {
+                       DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MINIX"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+               },
+       },
        { }
 };
 
@@ -751,12 +767,11 @@ static int bcm_resource(struct acpi_resource *ares, void *data)
                break;
        }
 
-       /* Always tell the ACPI core to skip this resource */
-       return 1;
+       return 0;
 }
 #endif /* CONFIG_ACPI */
 
-static int bcm_platform_probe(struct bcm_device *dev)
+static int bcm_get_resources(struct bcm_device *dev)
 {
        dev->name = dev_name(dev->dev);
 
@@ -786,15 +801,6 @@ static int bcm_platform_probe(struct bcm_device *dev)
        }
 
        dev_info(dev->dev, "BCM irq: %d\n", dev->irq);
-
-       /* Make sure at-least one of the GPIO is defined and that
-        * a name is specified for this instance
-        */
-       if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
-               dev_err(dev->dev, "invalid platform data\n");
-               return -EINVAL;
-       }
-
        return 0;
 }
 
@@ -805,6 +811,7 @@ static int bcm_acpi_probe(struct bcm_device *dev)
        const struct dmi_system_id *dmi_id;
        const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
        const struct acpi_device_id *id;
+       struct resource_entry *entry;
        int ret;
 
        /* Retrieve GPIO data */
@@ -821,11 +828,18 @@ static int bcm_acpi_probe(struct bcm_device *dev)
                                     &resources, bcm_resource, dev);
        if (ret < 0)
                return ret;
+
+       resource_list_for_each_entry(entry, &resources) {
+               if (resource_type(entry->res) == IORESOURCE_IRQ) {
+                       dev->irq = entry->res->start;
+                       break;
+               }
+       }
        acpi_dev_free_resource_list(&resources);
 
        dmi_id = dmi_first_match(bcm_active_low_irq_dmi_table);
        if (dmi_id) {
-               bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
+               dev_warn(dev->dev, "%s: Overwriting IRQ polarity to active low",
                            dmi_id->ident);
                dev->irq_active_low = true;
        }
@@ -839,6 +853,12 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 }
 #endif /* CONFIG_ACPI */
 
+static int bcm_of_probe(struct bcm_device *bdev)
+{
+       device_property_read_u32(bdev->dev, "max-speed", &bdev->oper_speed);
+       return 0;
+}
+
 static int bcm_probe(struct platform_device *pdev)
 {
        struct bcm_device *dev;
@@ -857,7 +877,7 @@ static int bcm_probe(struct platform_device *pdev)
                        return ret;
        }
 
-       ret = bcm_platform_probe(dev);
+       ret = bcm_get_resources(dev);
        if (ret)
                return ret;
 
@@ -921,12 +941,13 @@ static const struct acpi_device_id bcm_acpi_match[] = {
        { "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
        { "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
        { "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
+       { "BCM2EA4", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
        { },
 };
 MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
 #endif
 
-/* Platform suspend and resume callbacks */
+/* suspend and resume callbacks */
 static const struct dev_pm_ops bcm_pm_ops = {
        SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
        SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
@@ -944,29 +965,39 @@ static struct platform_driver bcm_driver = {
 
 static int bcm_serdev_probe(struct serdev_device *serdev)
 {
-       struct bcm_serdev *bcmdev;
-       u32 speed;
+       struct bcm_device *bcmdev;
        int err;
 
        bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
        if (!bcmdev)
                return -ENOMEM;
 
-       bcmdev->hu.serdev = serdev;
+       bcmdev->dev = &serdev->dev;
+       bcmdev->hu = &bcmdev->serdev_hu;
+       bcmdev->serdev_hu.serdev = serdev;
        serdev_device_set_drvdata(serdev, bcmdev);
 
-       err = device_property_read_u32(&serdev->dev, "max-speed", &speed);
-       if (!err)
-               bcmdev->hu.oper_speed = speed;
+       if (has_acpi_companion(&serdev->dev))
+               err = bcm_acpi_probe(bcmdev);
+       else
+               err = bcm_of_probe(bcmdev);
+       if (err)
+               return err;
 
-       return hci_uart_register_device(&bcmdev->hu, &bcm_proto);
+       err = bcm_get_resources(bcmdev);
+       if (err)
+               return err;
+
+       bcm_gpio_set_power(bcmdev, false);
+
+       return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
 }
 
 static void bcm_serdev_remove(struct serdev_device *serdev)
 {
-       struct bcm_serdev *bcmdev = serdev_device_get_drvdata(serdev);
+       struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev);
 
-       hci_uart_unregister_device(&bcmdev->hu);
+       hci_uart_unregister_device(&bcmdev->serdev_hu);
 }
 
 #ifdef CONFIG_OF
@@ -983,6 +1014,8 @@ static struct serdev_device_driver bcm_serdev_driver = {
        .driver = {
                .name = "hci_uart_bcm",
                .of_match_table = of_match_ptr(bcm_bluetooth_of_match),
+               .acpi_match_table = ACPI_PTR(bcm_acpi_match),
+               .pm = &bcm_pm_ops,
        },
 };