user: Restore debug usage message for '-d ?' in user mode emulation

[qemu.git] / hw / scsi-bus.c

diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index d322f3a326ba968111ccd8cccbf5e2808f188d56..8b1a4122106e30d9a1e43bb19361ef660dd7e3c7 100644 (file)
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -131,7 +131,8 @@ int scsi_bus_legacy_handle_cmdline(SCSIBus *bus)
     return res;
 }
 
-SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag, uint32_t lun)
+SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag,
+                            uint32_t lun, void *hba_private)
 {
     SCSIRequest *req;
 
@@ -141,17 +142,45 @@ SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag, uint32_t l
     req->dev = d;
     req->tag = tag;
     req->lun = lun;
+    req->hba_private = hba_private;
     req->status = -1;
     trace_scsi_req_alloc(req->dev->id, req->lun, req->tag);
     return req;
 }
 
-void scsi_req_enqueue(SCSIRequest *req)
+SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
+                          void *hba_private)
 {
+    return d->info->alloc_req(d, tag, lun, hba_private);
+}
+
+uint8_t *scsi_req_get_buf(SCSIRequest *req)
+{
+    return req->dev->info->get_buf(req);
+}
+
+int scsi_req_get_sense(SCSIRequest *req, uint8_t *buf, int len)
+{
+    if (req->dev->info->get_sense) {
+        return req->dev->info->get_sense(req, buf, len);
+    } else {
+        return 0;
+    }
+}
+
+int32_t scsi_req_enqueue(SCSIRequest *req, uint8_t *buf)
+{
+    int32_t rc;
+
     assert(!req->enqueued);
     scsi_req_ref(req);
     req->enqueued = true;
     QTAILQ_INSERT_TAIL(&req->dev->requests, req, next);
+
+    scsi_req_ref(req);
+    rc = req->dev->info->send_command(req, buf);
+    scsi_req_unref(req);
+    return rc;
 }
 
 static void scsi_req_dequeue(SCSIRequest *req)
@@ -387,7 +416,11 @@ int scsi_req_parse(SCSIRequest *req, uint8_t *buf)
     scsi_req_xfer_mode(req);
     req->cmd.lba = scsi_req_lba(req);
     trace_scsi_req_parsed(req->dev->id, req->lun, req->tag, buf[0],
-                          req->cmd.mode, req->cmd.xfer, req->cmd.lba);
+                          req->cmd.mode, req->cmd.xfer);
+    if (req->cmd.lba != -1) {
+        trace_scsi_req_parsed_lba(req->dev->id, req->lun, req->tag, buf[0],
+                              req->cmd.lba);
+    }
     return 0;
 }
 
@@ -590,15 +623,25 @@ void scsi_req_unref(SCSIRequest *req)
     }
 }
 
+/* Tell the device that we finished processing this chunk of I/O.  It
+   will start the next chunk or complete the command.  */
+void scsi_req_continue(SCSIRequest *req)
+{
+    trace_scsi_req_continue(req->dev->id, req->lun, req->tag);
+    if (req->cmd.mode == SCSI_XFER_TO_DEV) {
+        req->dev->info->write_data(req);
+    } else {
+        req->dev->info->read_data(req);
+    }
+}
+
 /* Called by the devices when data is ready for the HBA.  The HBA should
    start a DMA operation to read or fill the device's data buffer.
-   Once it completes, calling one of req->dev->info->read_data or
-   req->dev->info->write_data (depending on the direction of the
-   transfer) will restart I/O.  */
+   Once it completes, calling scsi_req_continue will restart I/O.  */
 void scsi_req_data(SCSIRequest *req, int len)
 {
     trace_scsi_req_data(req->dev->id, req->lun, req->tag, len);
-    req->bus->ops->complete(req, SCSI_REASON_DATA, len);
+    req->bus->ops->transfer_data(req, len);
 }
 
 void scsi_req_print(SCSIRequest *req)
@@ -634,7 +677,7 @@ void scsi_req_complete(SCSIRequest *req)
     assert(req->status != -1);
     scsi_req_ref(req);
     scsi_req_dequeue(req);
-    req->bus->ops->complete(req, SCSI_REASON_DONE, req->status);
+    req->bus->ops->complete(req, req->status);
     scsi_req_unref(req);
 }