]> git.proxmox.com Git - mirror_qemu.git/blobdiff - hw/scsi-generic.c
qom: Unify type registration
[mirror_qemu.git] / hw / scsi-generic.c
index 4af0f2435635a56dac3e582a1259d28438bacaa3..86014aa89355d12c65e177ef24e764698aa263ce 100644 (file)
@@ -39,8 +39,13 @@ do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
 
 #define SCSI_SENSE_BUF_SIZE 96
 
-#define SG_ERR_DRIVER_TIMEOUT 0x06
-#define SG_ERR_DRIVER_SENSE 0x08
+#define SG_ERR_DRIVER_TIMEOUT  0x06
+#define SG_ERR_DRIVER_SENSE    0x08
+
+#define SG_ERR_DID_OK          0x00
+#define SG_ERR_DID_NO_CONNECT  0x01
+#define SG_ERR_DID_BUS_BUSY    0x02
+#define SG_ERR_DID_TIME_OUT    0x03
 
 #ifndef MAX_UINT
 #define MAX_UINT ((unsigned int)-1)
@@ -68,8 +73,9 @@ static void scsi_command_complete(void *opaque, int ret)
     SCSIGenericReq *r = (SCSIGenericReq *)opaque;
 
     r->req.aiocb = NULL;
-    if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE)
+    if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
         r->req.sense_len = r->io_header.sb_len_wr;
+    }
 
     if (ret != 0) {
         switch (ret) {
@@ -86,9 +92,15 @@ static void scsi_command_complete(void *opaque, int ret)
             break;
         }
     } else {
-        if (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT) {
+        if (r->io_header.host_status == SG_ERR_DID_NO_CONNECT ||
+            r->io_header.host_status == SG_ERR_DID_BUS_BUSY ||
+            r->io_header.host_status == SG_ERR_DID_TIME_OUT ||
+            (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT)) {
             status = BUSY;
             BADF("Driver Timeout\n");
+        } else if (r->io_header.host_status) {
+            status = CHECK_CONDITION;
+            scsi_req_build_sense(&r->req, SENSE_CODE(I_T_NEXUS_LOSS));
         } else if (r->io_header.status) {
             status = r->io_header.status;
         } else if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
@@ -101,6 +113,9 @@ static void scsi_command_complete(void *opaque, int ret)
             r, r->req.tag, status);
 
     scsi_req_complete(&r->req, status);
+    if (!r->req.io_canceled) {
+        scsi_req_unref(&r->req);
+    }
 }
 
 /* Cancel a pending data transfer.  */
@@ -111,6 +126,11 @@ static void scsi_cancel_io(SCSIRequest *req)
     DPRINTF("Cancel tag=0x%x\n", req->tag);
     if (r->req.aiocb) {
         bdrv_aio_cancel(r->req.aiocb);
+
+        /* This reference was left in by scsi_*_data.  We take ownership of
+         * it independent of whether bdrv_aio_cancel completes the request
+         * or not.  */
+        scsi_req_unref(&r->req);
     }
     r->req.aiocb = NULL;
 }
@@ -132,10 +152,6 @@ static int execute_command(BlockDriverState *bdrv,
     r->io_header.flags |= SG_FLAG_DIRECT_IO;
 
     r->req.aiocb = bdrv_aio_ioctl(bdrv, SG_IO, &r->io_header, complete, r);
-    if (r->req.aiocb == NULL) {
-        BADF("execute_command: read failed !\n");
-        return -ENOMEM;
-    }
 
     return 0;
 }
@@ -143,6 +159,7 @@ static int execute_command(BlockDriverState *bdrv,
 static void scsi_read_complete(void * opaque, int ret)
 {
     SCSIGenericReq *r = (SCSIGenericReq *)opaque;
+    SCSIDevice *s = r->req.dev;
     int len;
 
     r->req.aiocb = NULL;
@@ -158,7 +175,21 @@ static void scsi_read_complete(void * opaque, int ret)
     if (len == 0) {
         scsi_command_complete(r, 0);
     } else {
+        /* Snoop READ CAPACITY output to set the blocksize.  */
+        if (r->req.cmd.buf[0] == READ_CAPACITY_10) {
+            s->blocksize = ldl_be_p(&r->buf[4]);
+            s->max_lba = ldl_be_p(&r->buf[0]);
+        } else if (r->req.cmd.buf[0] == SERVICE_ACTION_IN_16 &&
+                   (r->req.cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
+            s->blocksize = ldl_be_p(&r->buf[8]);
+            s->max_lba = ldq_be_p(&r->buf[0]);
+        }
+        bdrv_set_buffer_alignment(s->conf.bs, s->blocksize);
+
         scsi_req_data(&r->req, len);
+        if (!r->req.io_canceled) {
+            scsi_req_unref(&r->req);
+        }
     }
 }
 
@@ -170,6 +201,9 @@ static void scsi_read_data(SCSIRequest *req)
     int ret;
 
     DPRINTF("scsi_read_data 0x%x\n", req->tag);
+
+    /* The request is used as the AIO opaque value, so add a ref.  */
+    scsi_req_ref(&r->req);
     if (r->len == -1) {
         scsi_command_complete(r, 0);
         return;
@@ -218,6 +252,8 @@ static void scsi_write_data(SCSIRequest *req)
         return;
     }
 
+    /* The request is used as the AIO opaque value, so add a ref.  */
+    scsi_req_ref(&r->req);
     ret = execute_command(s->conf.bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
     if (ret < 0) {
         scsi_command_complete(r, ret);
@@ -232,19 +268,6 @@ static uint8_t *scsi_get_buf(SCSIRequest *req)
     return r->buf;
 }
 
-static void scsi_req_fixup(SCSIRequest *req)
-{
-    switch(req->cmd.buf[0]) {
-    case REWIND:
-    case START_STOP:
-        if (req->dev->type == TYPE_TAPE) {
-            /* force IMMED, otherwise qemu waits end of command */
-            req->cmd.buf[1] = 0x01;
-        }
-        break;
-    }
-}
-
 /* Execute a scsi command.  Returns the length of the data expected by the
    command.  This will be Positive for data transfers from the device
    (eg. disk reads), negative for transfers to the device (eg. disk writes),
@@ -256,8 +279,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
     SCSIDevice *s = r->req.dev;
     int ret;
 
-    scsi_req_fixup(&r->req);
-
     DPRINTF("Command: lun=%d tag=0x%x len %zd data=0x%02x", lun, tag,
             r->req.cmd.xfer, cmd[0]);
 
@@ -276,6 +297,8 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
             g_free(r->buf);
         r->buflen = 0;
         r->buf = NULL;
+        /* The request is used as the AIO opaque value, so add a ref.  */
+        scsi_req_ref(&r->req);
         ret = execute_command(s->conf.bs, r, SG_DXFER_NONE, scsi_command_complete);
         if (ret < 0) {
             scsi_command_complete(r, ret);
@@ -301,36 +324,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
     }
 }
 
-static int get_blocksize(BlockDriverState *bdrv)
-{
-    uint8_t cmd[10];
-    uint8_t buf[8];
-    uint8_t sensebuf[8];
-    sg_io_hdr_t io_header;
-    int ret;
-
-    memset(cmd, 0, sizeof(cmd));
-    memset(buf, 0, sizeof(buf));
-    cmd[0] = READ_CAPACITY_10;
-
-    memset(&io_header, 0, sizeof(io_header));
-    io_header.interface_id = 'S';
-    io_header.dxfer_direction = SG_DXFER_FROM_DEV;
-    io_header.dxfer_len = sizeof(buf);
-    io_header.dxferp = buf;
-    io_header.cmdp = cmd;
-    io_header.cmd_len = sizeof(cmd);
-    io_header.mx_sb_len = sizeof(sensebuf);
-    io_header.sbp = sensebuf;
-    io_header.timeout = 6000; /* XXX */
-
-    ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
-    if (ret < 0)
-        return -1;
-
-    return (buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | buf[7];
-}
-
 static int get_stream_blocksize(BlockDriverState *bdrv)
 {
     uint8_t cmd[6];
@@ -356,15 +349,15 @@ static int get_stream_blocksize(BlockDriverState *bdrv)
     io_header.timeout = 6000; /* XXX */
 
     ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
-    if (ret < 0)
+    if (ret < 0 || io_header.driver_status || io_header.host_status) {
         return -1;
-
+    }
     return (buf[9] << 16) | (buf[10] << 8) | buf[11];
 }
 
 static void scsi_generic_reset(DeviceState *dev)
 {
-    SCSIDevice *s = DO_UPCAST(SCSIDevice, qdev, dev);
+    SCSIDevice *s = SCSI_DEVICE(dev);
 
     scsi_device_purge_requests(s, SENSE_CODE(RESET));
 }
@@ -381,13 +374,13 @@ static int scsi_generic_initfn(SCSIDevice *s)
     struct sg_scsi_id scsiid;
 
     if (!s->conf.bs) {
-        error_report("scsi-generic: drive property not set");
+        error_report("drive property not set");
         return -1;
     }
 
     /* check we are really using a /dev/sg* file */
     if (!bdrv_is_sg(s->conf.bs)) {
-        error_report("scsi-generic: not /dev/sg*");
+        error_report("not /dev/sg*");
         return -1;
     }
 
@@ -403,41 +396,49 @@ static int scsi_generic_initfn(SCSIDevice *s)
     /* check we are using a driver managing SG_IO (version 3 and after */
     if (bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
         sg_version < 30000) {
-        error_report("scsi-generic: scsi generic interface too old");
+        error_report("scsi generic interface too old");
         return -1;
     }
 
     /* get LUN of the /dev/sg? */
     if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
-        error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed");
+        error_report("SG_GET_SCSI_ID ioctl failed");
         return -1;
     }
 
     /* define device state */
     s->type = scsiid.scsi_type;
     DPRINTF("device type %d\n", s->type);
-    if (s->type == TYPE_TAPE) {
+    if (s->type == TYPE_DISK || s->type == TYPE_ROM) {
+        add_boot_device_path(s->conf.bootindex, &s->qdev, NULL);
+    }
+
+    switch (s->type) {
+    case TYPE_TAPE:
         s->blocksize = get_stream_blocksize(s->conf.bs);
         if (s->blocksize == -1) {
             s->blocksize = 0;
         }
-    } else {
-        s->blocksize = get_blocksize(s->conf.bs);
-        /* removable media returns 0 if not present */
-        if (s->blocksize <= 0) {
-            if (s->type == TYPE_ROM || s->type  == TYPE_WORM) {
-                s->blocksize = 2048;
-            } else {
-                s->blocksize = 512;
-            }
-        }
+        break;
+
+        /* Make a guess for block devices, we'll fix it when the guest sends.
+         * READ CAPACITY.  If they don't, they likely would assume these sizes
+         * anyway. (TODO: they could also send MODE SENSE).
+         */
+    case TYPE_ROM:
+    case TYPE_WORM:
+        s->blocksize = 2048;
+        break;
+    default:
+        s->blocksize = 512;
+        break;
     }
 
     DPRINTF("block size %d\n", s->blocksize);
     return 0;
 }
 
-static SCSIReqOps scsi_generic_req_ops = {
+const SCSIReqOps scsi_generic_req_ops = {
     .size         = sizeof(SCSIGenericReq),
     .free_req     = scsi_free_request,
     .send_command = scsi_send_command,
@@ -448,7 +449,7 @@ static SCSIReqOps scsi_generic_req_ops = {
 };
 
 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
-                                     void *hba_private)
+                                     uint8_t *buf, void *hba_private)
 {
     SCSIRequest *req;
 
@@ -456,24 +457,37 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
     return req;
 }
 
-static SCSIDeviceInfo scsi_generic_info = {
-    .qdev.name    = "scsi-generic",
-    .qdev.desc    = "pass through generic scsi device (/dev/sg*)",
-    .qdev.size    = sizeof(SCSIDevice),
-    .qdev.reset   = scsi_generic_reset,
-    .init         = scsi_generic_initfn,
-    .destroy      = scsi_destroy,
-    .alloc_req    = scsi_new_request,
-    .qdev.props   = (Property[]) {
-        DEFINE_BLOCK_PROPERTIES(SCSIDevice, conf),
-        DEFINE_PROP_END_OF_LIST(),
-    },
+static Property scsi_generic_properties[] = {
+    DEFINE_BLOCK_PROPERTIES(SCSIDevice, conf),
+    DEFINE_PROP_END_OF_LIST(),
 };
 
-static void scsi_generic_register_devices(void)
+static void scsi_generic_class_initfn(ObjectClass *klass, void *data)
 {
-    scsi_qdev_register(&scsi_generic_info);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
+
+    sc->init         = scsi_generic_initfn;
+    sc->destroy      = scsi_destroy;
+    sc->alloc_req    = scsi_new_request;
+    dc->fw_name = "disk";
+    dc->desc = "pass through generic scsi device (/dev/sg*)";
+    dc->reset = scsi_generic_reset;
+    dc->props = scsi_generic_properties;
 }
-device_init(scsi_generic_register_devices)
+
+static TypeInfo scsi_generic_info = {
+    .name          = "scsi-generic",
+    .parent        = TYPE_SCSI_DEVICE,
+    .instance_size = sizeof(SCSIDevice),
+    .class_init    = scsi_generic_class_initfn,
+};
+
+static void scsi_generic_register_types(void)
+{
+    type_register_static(&scsi_generic_info);
+}
+
+type_init(scsi_generic_register_types)
 
 #endif /* __linux__ */