# @finish-migrate: guest is paused to finish the migration process
#
# @inmigrate: guest is paused waiting for an incoming migration. Note
-# that this state does not tell whether the machine will start at the
-# end of the migration. This depends on the command-line -S option and
-# any invocation of 'stop' or 'cont' that has happened since QEMU was
-# started.
+# that this state does not tell whether the machine will start at
+# the end of the migration. This depends on the command-line -S
+# option and any invocation of 'stop' or 'cont' that has happened
+# since QEMU was started.
#
-# @internal-error: An internal error that prevents further guest execution
-# has occurred
+# @internal-error: An internal error that prevents further guest
+# execution has occurred
#
-# @io-error: the last IOP has failed and the device is configured to pause
-# on I/O errors
+# @io-error: the last IOP has failed and the device is configured to
+# pause on I/O errors
#
# @paused: guest has been paused via the 'stop' command
#
#
# @suspended: guest is suspended (ACPI S3)
#
-# @watchdog: the watchdog action is configured to pause and has been triggered
+# @watchdog: the watchdog action is configured to pause and has been
+# triggered
#
-# @guest-panicked: guest has been panicked as a result of guest OS panic
+# @guest-panicked: guest has been panicked as a result of guest OS
+# panic
#
-# @colo: guest is paused to save/restore VM state under colo checkpoint,
-# VM can not get into this state unless colo capability is enabled
-# for migration. (since 2.8)
+# @colo: guest is paused to save/restore VM state under colo
+# checkpoint, VM can not get into this state unless colo
+# capability is enabled for migration. (since 2.8)
##
{ 'enum': 'RunState',
'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
# @host-ui: Reaction to a UI event, like window close
#
# @guest-shutdown: Guest shutdown/suspend request, via ACPI or other
-# hardware-specific means
+# hardware-specific means
#
# @guest-reset: Guest reset request, and command line turns that into
-# a shutdown
+# a shutdown
#
-# @guest-panic: Guest panicked, and command line turns that into a shutdown
+# @guest-panic: Guest panicked, and command line turns that into a
+# shutdown
#
-# @subsystem-reset: Partial guest reset that does not trigger QMP events and
-# ignores --no-reboot. This is useful for sanitizing
-# hypercalls on s390 that are used during kexec/kdump/boot
+# @subsystem-reset: Partial guest reset that does not trigger QMP
+# events and ignores --no-reboot. This is useful for sanitizing
+# hypercalls on s390 that are used during kexec/kdump/boot
#
+# @snapshot-load: A snapshot is being loaded by the record & replay
+# subsystem. This value is used only within QEMU. It doesn't
+# occur in QMP. (since 7.2)
##
{ 'enum': 'ShutdownCause',
# Beware, shutdown_caused_by_guest() depends on enumeration order
'data': [ 'none', 'host-error', 'host-qmp-quit', 'host-qmp-system-reset',
'host-signal', 'host-ui', 'guest-shutdown', 'guest-reset',
- 'guest-panic', 'subsystem-reset'] }
+ 'guest-panic', 'subsystem-reset', 'snapshot-load'] }
##
# @StatusInfo:
#
-# Information about VCPU run state
+# Information about VM run state
#
# @running: true if all VCPUs are runnable, false if not runnable
#
-# @singlestep: true if VCPUs are in single-step mode
-#
# @status: the virtual machine @RunState
#
-# Since: 0.14
+# Features:
+#
+# Since: 0.14
#
-# Notes: @singlestep is enabled through the GDB stub
##
{ 'struct': 'StatusInfo',
- 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} }
+ 'data': {'running': 'bool',
+ 'status': 'RunState'} }
##
# @query-status:
#
-# Query the run status of all VCPUs
+# Query the run status of the VM
#
-# Returns: @StatusInfo reflecting all VCPUs
+# Returns: @StatusInfo reflecting the VM
#
-# Since: 0.14
+# Since: 0.14
#
# Example:
#
# -> { "execute": "query-status" }
# <- { "return": { "running": true,
-# "singlestep": false,
# "status": "running" } }
-#
##
{ 'command': 'query-status', 'returns': 'StatusInfo',
'allow-preconfig': true }
##
# @SHUTDOWN:
#
-# Emitted when the virtual machine has shut down, indicating that qemu is
-# about to exit.
+# Emitted when the virtual machine has shut down, indicating that qemu
+# is about to exit.
#
-# @guest: If true, the shutdown was triggered by a guest request (such as
-# a guest-initiated ACPI shutdown request or other hardware-specific action)
-# rather than a host request (such as sending qemu a SIGINT). (since 2.10)
+# @guest: If true, the shutdown was triggered by a guest request (such
+# as a guest-initiated ACPI shutdown request or other
+# hardware-specific action) rather than a host request (such as
+# sending qemu a SIGINT). (since 2.10)
#
-# @reason: The @ShutdownCause which resulted in the SHUTDOWN. (since 4.0)
+# @reason: The @ShutdownCause which resulted in the SHUTDOWN. (since
+# 4.0)
#
-# Note: If the command-line option "-no-shutdown" has been specified, qemu will
-# not exit, and a STOP event will eventually follow the SHUTDOWN event
+# Note: If the command-line option "-no-shutdown" has been specified,
+# qemu will not exit, and a STOP event will eventually follow the
+# SHUTDOWN event
#
# Since: 0.12
#
# <- { "event": "SHUTDOWN",
# "data": { "guest": true, "reason": "guest-shutdown" },
# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
-#
##
{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }
##
# @POWERDOWN:
#
-# Emitted when the virtual machine is powered down through the power control
-# system, such as via ACPI.
+# Emitted when the virtual machine is powered down through the power
+# control system, such as via ACPI.
#
# Since: 0.12
#
#
# <- { "event": "POWERDOWN",
# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
-#
##
{ 'event': 'POWERDOWN' }
# Emitted when the virtual machine is reset
#
# @guest: If true, the reset was triggered by a guest request (such as
-# a guest-initiated ACPI reboot request or other hardware-specific action)
-# rather than a host request (such as the QMP command system_reset).
-# (since 2.10)
+# a guest-initiated ACPI reboot request or other hardware-specific
+# action) rather than a host request (such as the QMP command
+# system_reset). (since 2.10)
#
# @reason: The @ShutdownCause of the RESET. (since 4.0)
#
# <- { "event": "RESET",
# "data": { "guest": false, "reason": "guest-reset" },
# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
-#
##
{ 'event': 'RESET', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }
#
# <- { "event": "STOP",
# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
-#
##
{ 'event': 'STOP' }
#
# <- { "event": "RESUME",
# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
-#
##
{ 'event': 'RESUME' }
##
# @SUSPEND:
#
-# Emitted when guest enters a hardware suspension state, for example, S3 state,
-# which is sometimes called standby state
+# Emitted when guest enters a hardware suspension state, for example,
+# S3 state, which is sometimes called standby state
#
# Since: 1.1
#
#
# <- { "event": "SUSPEND",
# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
-#
##
{ 'event': 'SUSPEND' }
##
# @SUSPEND_DISK:
#
-# Emitted when guest enters a hardware suspension state with data saved on
-# disk, for example, S4 state, which is sometimes called hibernate state
+# Emitted when guest enters a hardware suspension state with data
+# saved on disk, for example, S4 state, which is sometimes called
+# hibernate state
#
-# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this state
+# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering
+# this state
#
# Since: 1.2
#
# Example:
#
-# <- { "event": "SUSPEND_DISK",
-# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
-#
+# <- { "event": "SUSPEND_DISK",
+# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
##
{ 'event': 'SUSPEND_DISK' }
##
# @WAKEUP:
#
-# Emitted when the guest has woken up from suspend state and is running
+# Emitted when the guest has woken up from suspend state and is
+# running
#
# Since: 1.1
#
#
# <- { "event": "WAKEUP",
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-#
##
{ 'event': 'WAKEUP' }
#
# @action: action that has been taken
#
-# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
-# followed respectively by the RESET, SHUTDOWN, or STOP events
+# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG
+# event is followed respectively by the RESET, SHUTDOWN, or STOP
+# events
#
# Note: This event is rate-limited.
#
# <- { "event": "WATCHDOG",
# "data": { "action": "reset" },
# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-#
##
{ 'event': 'WATCHDOG',
'data': { 'action': 'WatchdogAction' } }
##
# @WatchdogAction:
#
-# An enumeration of the actions taken when the watchdog device's timer is
-# expired
+# An enumeration of the actions taken when the watchdog device's timer
+# is expired
#
# @reset: system resets
#
-# @shutdown: system shutdown, note that it is similar to @powerdown, which
-# tries to set to system status and notify guest
+# @shutdown: system shutdown, note that it is similar to @powerdown,
+# which tries to set to system status and notify guest
#
# @poweroff: system poweroff, the emulator program exits
#
#
# @none: nothing is done
#
-# @inject-nmi: a non-maskable interrupt is injected into the first VCPU (all
-# VCPUS on x86) (since 2.4)
+# @inject-nmi: a non-maskable interrupt is injected into the first
+# VCPU (all VCPUS on x86) (since 2.4)
#
# Since: 2.1
##
#
# @reset: Reset the VM
#
-# @shutdown: Shutdown the VM and exit, according to the shutdown action
+# @shutdown: Shutdown the VM and exit, according to the shutdown
+# action
#
# Since: 6.0
##
#
# @pause: Pause the VM
#
-# @shutdown: Shutdown the VM and exit, according to the shutdown action
+# @shutdown: Shutdown the VM and exit, according to the shutdown
+# action
+#
+# @exit-failure: Shutdown the VM and exit with nonzero status (since
+# 7.1)
#
# Since: 6.0
##
{ 'enum': 'PanicAction',
- 'data': [ 'pause', 'shutdown', 'none' ] }
+ 'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] }
##
# @watchdog-set-action:
##
# @set-action:
#
-# Set the actions that will be taken by the emulator in response to guest
-# events.
+# Set the actions that will be taken by the emulator in response to
+# guest events.
#
# @reboot: @RebootAction action taken on guest reboot.
#
#
# @panic: @PanicAction action taken on guest panic.
#
-# @watchdog: @WatchdogAction action taken when watchdog timer expires .
+# @watchdog: @WatchdogAction action taken when watchdog timer expires
+# .
#
# Returns: Nothing on success.
#
# <- { "event": "GUEST_PANICKED",
# "data": { "action": "pause" },
# "timestamp": { "seconds": 1648245231, "microseconds": 900001 } }
-#
##
{ 'event': 'GUEST_PANICKED',
'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }
# <- { "event": "GUEST_CRASHLOADED",
# "data": { "action": "run" },
# "timestamp": { "seconds": 1648245259, "microseconds": 893771 } }
-#
##
{ 'event': 'GUEST_CRASHLOADED',
'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }
#
# @pause: system pauses
#
-# Since: 2.1 (poweroff since 2.8, run since 5.0)
+# @poweroff: system powers off (since 2.8)
+#
+# @run: system continues to run (since 5.0)
+#
+# Since: 2.1
##
{ 'enum': 'GuestPanicAction',
'data': [ 'pause', 'poweroff', 'run' ] }
{'union': 'GuestPanicInformation',
'base': {'type': 'GuestPanicInformationType'},
'discriminator': 'type',
- 'data': { 'hyper-v': 'GuestPanicInformationHyperV',
- 's390': 'GuestPanicInformationS390' } }
+ 'data': {'hyper-v': 'GuestPanicInformationHyperV',
+ 's390': 'GuestPanicInformationS390'}}
##
# @GuestPanicInformationHyperV:
# Since: 2.9
##
{'struct': 'GuestPanicInformationHyperV',
- 'data': { 'arg1': 'uint64',
- 'arg2': 'uint64',
- 'arg3': 'uint64',
- 'arg4': 'uint64',
- 'arg5': 'uint64' } }
+ 'data': {'arg1': 'uint64',
+ 'arg2': 'uint64',
+ 'arg3': 'uint64',
+ 'arg4': 'uint64',
+ 'arg5': 'uint64'}}
##
# @S390CrashReason:
#
# @disabled-wait: the CPU has entered a disabled wait state
#
-# @extint-loop: clock comparator or cpu timer interrupt with new PSW enabled
-# for external interrupts
+# @extint-loop: clock comparator or cpu timer interrupt with new PSW
+# enabled for external interrupts
#
# @pgmint-loop: program interrupt with BAD new PSW
#
-# @opint-loop: operation exception interrupt with invalid code at the program
-# interrupt new PSW
+# @opint-loop: operation exception interrupt with invalid code at the
+# program interrupt new PSW
#
# Since: 2.12
##
# S390 specific guest panic information (PSW)
#
# @core: core id of the CPU that crashed
+#
# @psw-mask: control fields of guest PSW
+#
# @psw-addr: guest instruction address
+#
# @reason: guest crash reason
#
# Since: 2.12
##
{'struct': 'GuestPanicInformationS390',
- 'data': { 'core': 'uint32',
- 'psw-mask': 'uint64',
- 'psw-addr': 'uint64',
- 'reason': 'S390CrashReason' } }
+ 'data': {'core': 'uint32',
+ 'psw-mask': 'uint64',
+ 'psw-addr': 'uint64',
+ 'reason': 'S390CrashReason'}}
##
# @MEMORY_FAILURE:
#
# @recipient: recipient is defined as @MemoryFailureRecipient.
#
-# @action: action that has been taken. action is defined as @MemoryFailureAction.
+# @action: action that has been taken. action is defined as
+# @MemoryFailureAction.
#
-# @flags: flags for MemoryFailureAction. action is defined as @MemoryFailureFlags.
+# @flags: flags for MemoryFailureAction. action is defined as
+# @MemoryFailureFlags.
#
# Since: 5.2
#
# "flags": { "action-required": false,
# "recursive": false } },
# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-#
##
{ 'event': 'MEMORY_FAILURE',
'data': { 'recipient': 'MemoryFailureRecipient',
#
# Hardware memory failure occurs, handled by recipient.
#
-# @hypervisor: memory failure at QEMU process address space.
-# (none guest memory, but used by QEMU itself).
+# @hypervisor: memory failure at QEMU process address space. (none
+# guest memory, but used by QEMU itself).
#
# @guest: memory failure at guest memory,
#
# Since: 5.2
-#
##
{ 'enum': 'MemoryFailureRecipient',
'data': [ 'hypervisor',
'guest' ] }
-
##
# @MemoryFailureAction:
#
# Actions taken by QEMU in response to a hardware memory failure.
#
-# @ignore: the memory failure could be ignored. This will only be the case
-# for action-optional failures.
+# @ignore: the memory failure could be ignored. This will only be the
+# case for action-optional failures.
#
-# @inject: memory failure occurred in guest memory, the guest enabled MCE
-# handling mechanism, and QEMU could inject the MCE into the guest
-# successfully.
+# @inject: memory failure occurred in guest memory, the guest enabled
+# MCE handling mechanism, and QEMU could inject the MCE into the
+# guest successfully.
#
-# @fatal: the failure is unrecoverable. This occurs for action-required
-# failures if the recipient is the hypervisor; QEMU will exit.
+# @fatal: the failure is unrecoverable. This occurs for
+# action-required failures if the recipient is the hypervisor;
+# QEMU will exit.
#
-# @reset: the failure is unrecoverable but confined to the guest. This
-# occurs if the recipient is a guest guest which is not ready
-# to handle memory failures.
+# @reset: the failure is unrecoverable but confined to the guest.
+# This occurs if the recipient is a guest guest which is not ready
+# to handle memory failures.
#
# Since: 5.2
-#
##
{ 'enum': 'MemoryFailureAction',
'data': [ 'ignore',
# Additional information on memory failures.
#
# @action-required: whether a memory failure event is action-required
-# or action-optional (e.g. a failure during memory scrub).
+# or action-optional (e.g. a failure during memory scrub).
#
-# @recursive: whether the failure occurred while the previous
-# failure was still in progress.
+# @recursive: whether the failure occurred while the previous failure
+# was still in progress.
#
# Since: 5.2
-#
##
{ 'struct': 'MemoryFailureFlags',
'data': { 'action-required': 'bool',
'recursive': 'bool'} }
+
+##
+# @NotifyVmexitOption:
+#
+# An enumeration of the options specified when enabling notify VM exit
+#
+# @run: enable the feature, do nothing and continue if the notify VM
+# exit happens.
+#
+# @internal-error: enable the feature, raise a internal error if the
+# notify VM exit happens.
+#
+# @disable: disable the feature.
+#
+# Since: 7.2
+##
+{ 'enum': 'NotifyVmexitOption',
+ 'data': [ 'run', 'internal-error', 'disable' ] }