[thumbnail="screenshot/gui-create-vm-os.png"]
-When creating a VM, setting the proper Operating System(OS) allows {pve} to
-optimize some low level parameters. For instance Windows OS expect the BIOS
-clock to use the local time, while Unix based OS expect the BIOS clock to have
-the UTC time.
+When creating a virtual machine (VM), setting the proper Operating System(OS)
+allows {pve} to optimize some low level parameters. For instance Windows OS
+expect the BIOS clock to use the local time, while Unix based OS expect the
+BIOS clock to have the UTC time.
+[[qm_system_settings]]
+System Settings
+~~~~~~~~~~~~~~~
+
+On VM creation you can change some basic system components of the new VM. You
+can specify which xref:qm_display[display type] you want to use.
+[thumbnail="screenshot/gui-create-vm-system.png"]
+Additionally, the xref:qm_hard_disk[SCSI controller] can be changed.
+If you plan to install the QEMU Guest Agent, or if your selected ISO image
+already ships and installs it automatically, you may want to tick the 'Qemu
+Agent' box, which lets {pve} know that it can use its features to show some
+more information, and complete some actions (for example, shutdown or
+snapshots) more intelligently.
+
+{pve} allows to boot VMs with different firmware and machine types, namely
+xref:qm_bios_and_uefi[SeaBIOS and OVMF]. In most cases you want to switch from
+the default SeabBIOS to OVMF only if you plan to use
+xref:qm_pci_passthrough[PCIe pass through]. A VMs 'Machine Type' defines the
+hardware layout of the VM's virtual motherboard. You can choose between the
+default https://en.wikipedia.org/wiki/Intel_440FX[Intel 440FX] or the
+https://ark.intel.com/content/www/us/en/ark/products/31918/intel-82q35-graphics-and-memory-controller.html[Q35]
+chipset, which also provides a virtual PCIe bus, and thus may be desired if
+one want's to pass through PCIe hardware.
[[qm_hard_disk]]
Hard Disk
configured requires to skip replication for this disk image.
If your storage supports _thin provisioning_ (see the storage chapter in the
-{pve} guide), and your VM has a *SCSI* controller you can activate the *Discard*
-option on the hard disks connected to that controller. With *Discard* enabled,
-when the filesystem of a VM marks blocks as unused after removing files, the
-emulated SCSI controller will relay this information to the storage, which will
-then shrink the disk image accordingly.
+{pve} guide), you can activate the *Discard* option on a drive. With *Discard*
+set and a _TRIM_-enabled guest OS footnote:[TRIM, UNMAP, and discard
+https://en.wikipedia.org/wiki/Trim_%28computing%29], when the VM's filesystem
+marks blocks as unused after deleting files, the controller will relay this
+information to the storage, which will then shrink the disk image accordingly.
+For the guest to be able to issue _TRIM_ commands, you must enable the *Discard*
+option on the drive. Some guest operating systems may also require the
+*SSD Emulation* flag to be set. Note that *Discard* on *VirtIO Block* drives is
+only supported on guests using Linux Kernel 5.0 or higher.
+
+If you would like a drive to be presented to the guest as a solid-state drive
+rather than a rotational hard disk, you can set the *SSD emulation* option on
+that drive. There is no requirement that the underlying storage actually be
+backed by SSDs; this feature can be used with physical media of any type.
+Note that *SSD emulation* is not supported on *VirtIO Block* drives.
.IO Thread
The option *IO Thread* can only be used when using a disk with the
This option is also required to hot-plug cores or RAM in a VM.
If the NUMA option is used, it is recommended to set the number of sockets to
-the number of sockets of the host system.
+the number of nodes of the host system.
vCPU hot-plug
^^^^^^^^^^^^^
.Fixed Memory Allocation
[thumbnail="screenshot/gui-create-vm-memory.png"]
-When setting memory and minimum memory to the same amount
+ghen setting memory and minimum memory to the same amount
{pve} will simply allocate what you specify to your VM.
Even when using a fixed memory size, the ballooning device gets added to the
process a great number of incoming connections, such as when the VM is running
as a router, reverse proxy or a busy HTTP server doing long polling.
+[[qm_display]]
+Display
+~~~~~~~
+
+QEMU can virtualize a few types of VGA hardware. Some examples are:
+
+* *std*, the default, emulates a card with Bochs VBE extensions.
+* *cirrus*, this was once the default, it emulates a very old hardware module
+with all its problems. This display type should only be used if really
+necessary footnote:[https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
+qemu: using cirrus considered harmful], e.g., if using Windows XP or earlier
+* *vmware*, is a VMWare SVGA-II compatible adapter.
+* *qxl*, is the QXL paravirtualized graphics card. Selecting this also
+enables SPICE for the VM.
+
+You can edit the amount of memory given to the virtual GPU, by setting
+the 'memory' option. This can enable higher resolutions inside the VM,
+especially with SPICE/QXL.
+
+As the memory is reserved by display device, selecting Multi-Monitor mode
+for SPICE (e.g., `qxl2` for dual monitors) has some implications:
+
+* Windows needs a device for each monitor, so if your 'ostype' is some
+version of Windows, {pve} gives the VM an extra device per monitor.
+Each device gets the specified amount of memory.
+
+* Linux VMs, can always enable more virtual monitors, but selecting
+a Multi-Monitor mode multiplies the memory given to the device with
+the number of monitors.
+
+Selecting `serialX` as display 'type' disables the VGA output, and redirects
+the Web Console to the selected serial port. A configured display 'memory'
+setting will be ignored in that case.
[[qm_usb_passthrough]]
USB Passthrough
~~~~~~~~~~~~~
In order to properly emulate a computer, QEMU needs to use a firmware.
-By default QEMU uses *SeaBIOS* for this, which is an open-source, x86 BIOS
-implementation. SeaBIOS is a good choice for most standard setups.
+Which, on common PCs often known as BIOS or (U)EFI, is executed as one of the
+first steps when booting a VM. It is responsible for doing basic hardware
+initialization and for providing an interface to the firmware and hardware for
+the operating system. By default QEMU uses *SeaBIOS* for this, which is an
+open-source, x86 BIOS implementation. SeaBIOS is a good choice for most
+standard setups.
There are, however, some scenarios in which a BIOS is not a good firmware
to boot from, e.g. if you want to do VGA passthrough. footnote:[Alex Williamson has a very good blog entry about this.
with a press of the ESC button during boot), or you have to choose
SPICE as the display type.
+[[qm_ivshmem]]
+Inter-VM shared memory
+~~~~~~~~~~~~~~~~~~~~~~
+
+You can add an Inter-VM shared memory device (`ivshmem`), which allows one to
+share memory between the host and a guest, or also between multiple guests.
+
+To add such a device, you can use `qm`:
+
+ qm set <vmid> -ivshmem size=32,name=foo
+
+Where the size is in MiB. The file will be located under
+`/dev/shm/pve-shm-$name` (the default name is the vmid).
+
+NOTE: Currently the device will get deleted as soon as any VM using it got
+shutdown or stopped. Open connections will still persist, but new connections
+to the exact same device cannot be made anymore.
+
+A use case for such a device is the Looking Glass
+footnote:[Looking Glass: https://looking-glass.hostfission.com/] project,
+which enables high performance, low-latency display mirroring between
+host and guest.
+
+[[qm_audio_device]]
+Audio Device
+~~~~~~~~~~~~
+
+To add an audio device run the following command:
+
+----
+qm set <vmid> -audio0 device=<device>
+----
+
+Supported audio devices are:
+
+* `ich9-intel-hda`: Intel HD Audio Controller, emulates ICH9
+* `intel-hda`: Intel HD Audio Controller, emulates ICH6
+* `AC97`: Audio Codec '97, useful for older operating systems like Windows XP
+
+NOTE: The audio device works only in combination with SPICE. Remote protocols
+like Microsoft's RDP have options to play sound. To use the physical audio
+device of the host use device passthrough (see
+xref:qm_pci_passthrough[PCI Passthrough] and
+xref:qm_usb_passthrough[USB Passthrough]).
+
[[qm_startup_and_shutdown]]
Automatic Start and Shutdown of Virtual Machines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
disk image *Format* if the storage driver supports several formats.
+
-NOTE: A full clone need to read and copy all VM image data. This is
+NOTE: A full clone needs to read and copy all VM image data. This is
usually much slower than creating a linked clone.
+
Linked Clone::
-Modern storage drivers supports a way to generate fast linked
+Modern storage drivers support a way to generate fast linked
clones. Such a clone is a writable copy whose initial contents are the
same as the original data. Creating a linked clone is nearly
instantaneous, and initially consumes no additional space.
templates can later be used to create linked clones efficiently.
+
-NOTE: You cannot delete the original template while linked clones
-exists.
+NOTE: You cannot delete an original template while linked clones
+exist.
+
It is not possible to change the *Target storage* for linked clones,
different node. The only restriction is that the VM is on shared
storage, and that storage is also available on the target node.
-To avoid resource conflicts, all network interface MAC addresses gets
+To avoid resource conflicts, all network interface MAC addresses get
randomized, and we generate a new 'UUID' for the VM BIOS (smbios1)
setting.
VM Generation ID
----------------
-{pve} supports Virtual Machine Generation ID ('vmgedid') footnote:[Official
+{pve} supports Virtual Machine Generation ID ('vmgenid') footnote:[Official
'vmgenid' Specification
https://docs.microsoft.com/en-us/windows/desktop/hyperv_v2/virtual-machine-generation-identifier]
for virtual machines.
include::qm-cloud-init.adoc[]
endif::wiki[]
+ifndef::wiki[]
+include::qm-pci-passthrough.adoc[]
+endif::wiki[]
+
+Hookscripts
+-----------
+
+You can add a hook script to VMs with the config property `hookscript`.
+
+ qm set 100 -hookscript local:snippets/hookscript.pl
+It will be called during various phases of the guests lifetime.
+For an example and documentation see the example script under
+`/usr/share/pve-docs/examples/guest-example-hookscript.pl`.
Managing Virtual Machines with `qm`
------------------------------------