#include <sys/mman.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
+#include <netinet/in.h>
+#include <dirent.h>
#ifdef _BSD
#include <sys/stat.h>
+#ifndef __APPLE__
#include <libutil.h>
+#endif
#else
#include <linux/if.h>
#include <linux/if_tun.h>
#endif
#ifdef CONFIG_SDL
-#if defined(__linux__)
-/* SDL use the pthreads and they modify sigaction. We don't
- want that. */
-#if (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2))
-extern void __libc_sigaction();
-#define sigaction(sig, act, oact) __libc_sigaction(sig, act, oact)
-#else
-extern void __sigaction();
-#define sigaction(sig, act, oact) __sigaction(sig, act, oact)
+#ifdef __APPLE__
+#include <SDL/SDL.h>
#endif
-#endif /* __linux__ */
#endif /* CONFIG_SDL */
#include "disas.h"
#ifdef TARGET_PPC
#define DEFAULT_RAM_SIZE 144
#else
-#define DEFAULT_RAM_SIZE 32
+#define DEFAULT_RAM_SIZE 128
#endif
/* in ms */
#define GUI_REFRESH_INTERVAL 30
int bios_size;
static DisplayState display_state;
int nographic;
+const char* keyboard_layout = NULL;
int64_t ticks_per_sec;
int boot_device = 'c';
int ram_size;
int pit_min_timer_count = 0;
int nb_nics;
NetDriverState nd_table[MAX_NICS];
-SerialState *serial_console;
QEMUTimer *gui_timer;
int vm_running;
int audio_enabled = 0;
+int sb16_enabled = 1;
+int adlib_enabled = 1;
+int gus_enabled = 1;
int pci_enabled = 1;
int prep_enabled = 0;
int rtc_utc = 1;
-int cirrus_vga_enabled = 0;
-int graphic_width = 640;
-int graphic_height = 480;
+int cirrus_vga_enabled = 1;
+int graphic_width = 800;
+int graphic_height = 600;
int graphic_depth = 15;
+int full_screen = 0;
+TextConsole *vga_console;
+CharDriverState *serial_hds[MAX_SERIAL_PORTS];
/***********************************************************/
/* x86 ISA bus support */
return buf;
}
+int strstart(const char *str, const char *val, const char **ptr)
+{
+ const char *p, *q;
+ p = str;
+ q = val;
+ while (*q != '\0') {
+ if (*p != *q)
+ return 0;
+ p++;
+ q++;
+ }
+ if (ptr)
+ *ptr = p;
+ return 1;
+}
+
/* return the size or -1 if error */
int get_image_size(const char *filename)
{
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
#ifdef TARGET_I386
- cpu_x86_dump_state(global_env, stderr, X86_DUMP_FPU | X86_DUMP_CCOP);
+ cpu_dump_state(global_env, stderr, fprintf, X86_DUMP_FPU | X86_DUMP_CCOP);
#else
- cpu_dump_state(global_env, stderr, 0);
+ cpu_dump_state(global_env, stderr, fprintf, 0);
#endif
va_end(ap);
abort();
for(;;) {
ts = *ptimer_head;
- if (ts->expire_time > current_time)
+ if (!ts || ts->expire_time > current_time)
break;
/* remove timer from the list before calling the callback */
*ptimer_head = ts->next;
the emulated kernel requested a too high timer frequency */
getitimer(ITIMER_REAL, &itv);
+#if defined(__linux__)
if (itv.it_interval.tv_usec > 1000) {
/* try to use /dev/rtc to have a faster timer */
if (start_rtc_timer() < 0)
sigaction(SIGIO, &act, NULL);
fcntl(rtc_fd, F_SETFL, O_ASYNC);
fcntl(rtc_fd, F_SETOWN, getpid());
- } else {
+ } else
+#endif /* defined(__linux__) */
+ {
use_itimer:
pit_min_timer_count = ((uint64_t)itv.it_interval.tv_usec *
PIT_FREQ) / 1000000;
}
/***********************************************************/
-/* serial device */
+/* character device */
-#ifdef _WIN32
+int qemu_chr_write(CharDriverState *s, const uint8_t *buf, int len)
+{
+ return s->chr_write(s, buf, len);
+}
-int serial_open_device(void)
+void qemu_chr_printf(CharDriverState *s, const char *fmt, ...)
{
- return -1;
+ char buf[4096];
+ va_list ap;
+ va_start(ap, fmt);
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ qemu_chr_write(s, buf, strlen(buf));
+ va_end(ap);
}
-#else
+void qemu_chr_send_event(CharDriverState *s, int event)
+{
+ if (s->chr_send_event)
+ s->chr_send_event(s, event);
+}
-int serial_open_device(void)
+void qemu_chr_add_read_handler(CharDriverState *s,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- char slave_name[1024];
- int master_fd, slave_fd;
+ s->chr_add_read_handler(s, fd_can_read, fd_read, opaque);
+}
+
+void qemu_chr_add_event_handler(CharDriverState *s, IOEventHandler *chr_event)
+{
+ s->chr_event = chr_event;
+}
- if (serial_console == NULL && nographic) {
- /* use console for serial port */
- return 0;
+static int null_chr_write(CharDriverState *chr, const uint8_t *buf, int len)
+{
+ return len;
+}
+
+static void null_chr_add_read_handler(CharDriverState *chr,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
+{
+}
+
+CharDriverState *qemu_chr_open_null(void)
+{
+ CharDriverState *chr;
+
+ chr = qemu_mallocz(sizeof(CharDriverState));
+ if (!chr)
+ return NULL;
+ chr->chr_write = null_chr_write;
+ chr->chr_add_read_handler = null_chr_add_read_handler;
+ return chr;
+}
+
+#ifndef _WIN32
+
+typedef struct {
+ int fd_in, fd_out;
+ /* for nographic stdio only */
+ IOCanRWHandler *fd_can_read;
+ IOReadHandler *fd_read;
+ void *fd_opaque;
+} FDCharDriver;
+
+#define STDIO_MAX_CLIENTS 2
+
+static int stdio_nb_clients;
+static CharDriverState *stdio_clients[STDIO_MAX_CLIENTS];
+
+static int unix_write(int fd, const uint8_t *buf, int len1)
+{
+ int ret, len;
+
+ len = len1;
+ while (len > 0) {
+ ret = write(fd, buf, len);
+ if (ret < 0) {
+ if (errno != EINTR && errno != EAGAIN)
+ return -1;
+ } else if (ret == 0) {
+ break;
+ } else {
+ buf += ret;
+ len -= ret;
+ }
+ }
+ return len1 - len;
+}
+
+static int fd_chr_write(CharDriverState *chr, const uint8_t *buf, int len)
+{
+ FDCharDriver *s = chr->opaque;
+ return unix_write(s->fd_out, buf, len);
+}
+
+static void fd_chr_add_read_handler(CharDriverState *chr,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
+{
+ FDCharDriver *s = chr->opaque;
+
+ if (nographic && s->fd_in == 0) {
+ s->fd_can_read = fd_can_read;
+ s->fd_read = fd_read;
+ s->fd_opaque = opaque;
} else {
-#if 0
- /* Not satisfying */
- if (openpty(&master_fd, &slave_fd, slave_name, NULL, NULL) < 0) {
- fprintf(stderr, "warning: could not create pseudo terminal for serial port\n");
- return -1;
+ qemu_add_fd_read_handler(s->fd_in, fd_can_read, fd_read, opaque);
+ }
+}
+
+/* open a character device to a unix fd */
+CharDriverState *qemu_chr_open_fd(int fd_in, int fd_out)
+{
+ CharDriverState *chr;
+ FDCharDriver *s;
+
+ chr = qemu_mallocz(sizeof(CharDriverState));
+ if (!chr)
+ return NULL;
+ s = qemu_mallocz(sizeof(FDCharDriver));
+ if (!s) {
+ free(chr);
+ return NULL;
+ }
+ s->fd_in = fd_in;
+ s->fd_out = fd_out;
+ chr->opaque = s;
+ chr->chr_write = fd_chr_write;
+ chr->chr_add_read_handler = fd_chr_add_read_handler;
+ return chr;
+}
+
+/* for STDIO, we handle the case where several clients use it
+ (nographic mode) */
+
+#define TERM_ESCAPE 0x01 /* ctrl-a is used for escape */
+
+static int term_got_escape, client_index;
+
+void term_print_help(void)
+{
+ printf("\n"
+ "C-a h print this help\n"
+ "C-a x exit emulator\n"
+ "C-a s save disk data back to file (if -snapshot)\n"
+ "C-a b send break (magic sysrq)\n"
+ "C-a c switch between console and monitor\n"
+ "C-a C-a send C-a\n"
+ );
+}
+
+/* called when a char is received */
+static void stdio_received_byte(int ch)
+{
+ if (term_got_escape) {
+ term_got_escape = 0;
+ switch(ch) {
+ case 'h':
+ term_print_help();
+ break;
+ case 'x':
+ exit(0);
+ break;
+ case 's':
+ {
+ int i;
+ for (i = 0; i < MAX_DISKS; i++) {
+ if (bs_table[i])
+ bdrv_commit(bs_table[i]);
+ }
+ }
+ break;
+ case 'b':
+ if (client_index < stdio_nb_clients) {
+ CharDriverState *chr;
+ FDCharDriver *s;
+
+ chr = stdio_clients[client_index];
+ s = chr->opaque;
+ chr->chr_event(s->fd_opaque, CHR_EVENT_BREAK);
+ }
+ break;
+ case 'c':
+ client_index++;
+ if (client_index >= stdio_nb_clients)
+ client_index = 0;
+ if (client_index == 0) {
+ /* send a new line in the monitor to get the prompt */
+ ch = '\r';
+ goto send_char;
+ }
+ break;
+ case TERM_ESCAPE:
+ goto send_char;
}
- fprintf(stderr, "Serial port redirected to %s\n", slave_name);
- return master_fd;
-#else
- return -1;
-#endif
+ } else if (ch == TERM_ESCAPE) {
+ term_got_escape = 1;
+ } else {
+ send_char:
+ if (client_index < stdio_nb_clients) {
+ uint8_t buf[1];
+ CharDriverState *chr;
+ FDCharDriver *s;
+
+ chr = stdio_clients[client_index];
+ s = chr->opaque;
+ buf[0] = ch;
+ /* XXX: should queue the char if the device is not
+ ready */
+ if (s->fd_can_read(s->fd_opaque) > 0)
+ s->fd_read(s->fd_opaque, buf, 1);
+ }
+ }
+}
+
+static int stdio_can_read(void *opaque)
+{
+ /* XXX: not strictly correct */
+ return 1;
+}
+
+static void stdio_read(void *opaque, const uint8_t *buf, int size)
+{
+ int i;
+ for(i = 0; i < size; i++)
+ stdio_received_byte(buf[i]);
+}
+
+/* init terminal so that we can grab keys */
+static struct termios oldtty;
+static int old_fd0_flags;
+
+static void term_exit(void)
+{
+ tcsetattr (0, TCSANOW, &oldtty);
+ fcntl(0, F_SETFL, old_fd0_flags);
+}
+
+static void term_init(void)
+{
+ struct termios tty;
+
+ tcgetattr (0, &tty);
+ oldtty = tty;
+ old_fd0_flags = fcntl(0, F_GETFL);
+
+ tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP
+ |INLCR|IGNCR|ICRNL|IXON);
+ tty.c_oflag |= OPOST;
+ tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN);
+ /* if graphical mode, we allow Ctrl-C handling */
+ if (nographic)
+ tty.c_lflag &= ~ISIG;
+ tty.c_cflag &= ~(CSIZE|PARENB);
+ tty.c_cflag |= CS8;
+ tty.c_cc[VMIN] = 1;
+ tty.c_cc[VTIME] = 0;
+
+ tcsetattr (0, TCSANOW, &tty);
+
+ atexit(term_exit);
+
+ fcntl(0, F_SETFL, O_NONBLOCK);
+}
+
+CharDriverState *qemu_chr_open_stdio(void)
+{
+ CharDriverState *chr;
+
+ if (nographic) {
+ if (stdio_nb_clients >= STDIO_MAX_CLIENTS)
+ return NULL;
+ chr = qemu_chr_open_fd(0, 1);
+ if (stdio_nb_clients == 0)
+ qemu_add_fd_read_handler(0, stdio_can_read, stdio_read, NULL);
+ client_index = stdio_nb_clients;
+ } else {
+ if (stdio_nb_clients != 0)
+ return NULL;
+ chr = qemu_chr_open_fd(0, 1);
+ }
+ stdio_clients[stdio_nb_clients++] = chr;
+ if (stdio_nb_clients == 1) {
+ /* set the terminal in raw mode */
+ term_init();
+ }
+ return chr;
+}
+
+#if defined(__linux__)
+CharDriverState *qemu_chr_open_pty(void)
+{
+ char slave_name[1024];
+ int master_fd, slave_fd;
+
+ /* Not satisfying */
+ if (openpty(&master_fd, &slave_fd, slave_name, NULL, NULL) < 0) {
+ return NULL;
}
+ fprintf(stderr, "char device redirected to %s\n", slave_name);
+ return qemu_chr_open_fd(master_fd, master_fd);
}
+#else
+CharDriverState *qemu_chr_open_pty(void)
+{
+ return NULL;
+}
+#endif
+#endif /* !defined(_WIN32) */
+
+CharDriverState *qemu_chr_open(const char *filename)
+{
+ if (!strcmp(filename, "vc")) {
+ return text_console_init(&display_state);
+ } else if (!strcmp(filename, "null")) {
+ return qemu_chr_open_null();
+ } else
+#ifndef _WIN32
+ if (!strcmp(filename, "pty")) {
+ return qemu_chr_open_pty();
+ } else if (!strcmp(filename, "stdio")) {
+ return qemu_chr_open_stdio();
+ } else
#endif
+ {
+ return NULL;
+ }
+}
/***********************************************************/
/* Linux network device redirectors */
return 0;
}
+static int get_str_sep(char *buf, int buf_size, const char **pp, int sep)
+{
+ const char *p, *p1;
+ int len;
+ p = *pp;
+ p1 = strchr(p, sep);
+ if (!p1)
+ return -1;
+ len = p1 - p;
+ p1++;
+ if (buf_size > 0) {
+ if (len > buf_size - 1)
+ len = buf_size - 1;
+ memcpy(buf, p, len);
+ buf[len] = '\0';
+ }
+ *pp = p1;
+ return 0;
+}
+
+static void net_slirp_redir(const char *redir_str)
+{
+ int is_udp;
+ char buf[256], *r;
+ const char *p;
+ struct in_addr guest_addr;
+ int host_port, guest_port;
+
+ if (!slirp_inited) {
+ slirp_inited = 1;
+ slirp_init();
+ }
+
+ p = redir_str;
+ if (get_str_sep(buf, sizeof(buf), &p, ':') < 0)
+ goto fail;
+ if (!strcmp(buf, "tcp")) {
+ is_udp = 0;
+ } else if (!strcmp(buf, "udp")) {
+ is_udp = 1;
+ } else {
+ goto fail;
+ }
+
+ if (get_str_sep(buf, sizeof(buf), &p, ':') < 0)
+ goto fail;
+ host_port = strtol(buf, &r, 0);
+ if (r == buf)
+ goto fail;
+
+ if (get_str_sep(buf, sizeof(buf), &p, ':') < 0)
+ goto fail;
+ if (buf[0] == '\0') {
+ pstrcpy(buf, sizeof(buf), "10.0.2.15");
+ }
+ if (!inet_aton(buf, &guest_addr))
+ goto fail;
+
+ guest_port = strtol(p, &r, 0);
+ if (r == p)
+ goto fail;
+
+ if (slirp_redir(is_udp, host_port, guest_addr, guest_port) < 0) {
+ fprintf(stderr, "qemu: could not set up redirection\n");
+ exit(1);
+ }
+ return;
+ fail:
+ fprintf(stderr, "qemu: syntax: -redir [tcp|udp]:host-port:[guest-host]:guest-port\n");
+ exit(1);
+}
+
+#ifndef _WIN32
+
+char smb_dir[1024];
+
+static void smb_exit(void)
+{
+ DIR *d;
+ struct dirent *de;
+ char filename[1024];
+
+ /* erase all the files in the directory */
+ d = opendir(smb_dir);
+ for(;;) {
+ de = readdir(d);
+ if (!de)
+ break;
+ if (strcmp(de->d_name, ".") != 0 &&
+ strcmp(de->d_name, "..") != 0) {
+ snprintf(filename, sizeof(filename), "%s/%s",
+ smb_dir, de->d_name);
+ unlink(filename);
+ }
+ }
+ closedir(d);
+ rmdir(smb_dir);
+}
+
+/* automatic user mode samba server configuration */
+void net_slirp_smb(const char *exported_dir)
+{
+ char smb_conf[1024];
+ char smb_cmdline[1024];
+ FILE *f;
+
+ if (!slirp_inited) {
+ slirp_inited = 1;
+ slirp_init();
+ }
+
+ /* XXX: better tmp dir construction */
+ snprintf(smb_dir, sizeof(smb_dir), "/tmp/qemu-smb.%d", getpid());
+ if (mkdir(smb_dir, 0700) < 0) {
+ fprintf(stderr, "qemu: could not create samba server dir '%s'\n", smb_dir);
+ exit(1);
+ }
+ snprintf(smb_conf, sizeof(smb_conf), "%s/%s", smb_dir, "smb.conf");
+
+ f = fopen(smb_conf, "w");
+ if (!f) {
+ fprintf(stderr, "qemu: could not create samba server configuration file '%s'\n", smb_conf);
+ exit(1);
+ }
+ fprintf(f,
+ "[global]\n"
+ "pid directory=%s\n"
+ "lock directory=%s\n"
+ "log file=%s/log.smbd\n"
+ "smb passwd file=%s/smbpasswd\n"
+ "security = share\n"
+ "[qemu]\n"
+ "path=%s\n"
+ "read only=no\n"
+ "guest ok=yes\n",
+ smb_dir,
+ smb_dir,
+ smb_dir,
+ smb_dir,
+ exported_dir
+ );
+ fclose(f);
+ atexit(smb_exit);
+
+ snprintf(smb_cmdline, sizeof(smb_cmdline), "/usr/sbin/smbd -s %s",
+ smb_conf);
+
+ slirp_add_exec(0, smb_cmdline, 4, 139);
+}
+
+#endif /* !defined(_WIN32) */
+
#endif /* CONFIG_SLIRP */
#if !defined(_WIN32)
#endif /* !_WIN32 */
/***********************************************************/
-/* dumb display */
-
-#ifdef _WIN32
-
-static void term_exit(void)
-{
-}
+/* pid file */
-static void term_init(void)
-{
-}
+static char *pid_filename;
-#else
+/* Remove PID file. Called on normal exit */
-/* init terminal so that we can grab keys */
-static struct termios oldtty;
-static int old_fd0_flags;
-
-static void term_exit(void)
+static void remove_pidfile(void)
{
- tcsetattr (0, TCSANOW, &oldtty);
- fcntl(0, F_SETFL, old_fd0_flags);
+ unlink (pid_filename);
}
-static void term_init(void)
+static void create_pidfile(const char *filename)
{
- struct termios tty;
-
- tcgetattr (0, &tty);
- oldtty = tty;
- old_fd0_flags = fcntl(0, F_GETFL);
-
- tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP
- |INLCR|IGNCR|ICRNL|IXON);
- tty.c_oflag |= OPOST;
- tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN);
- /* if graphical mode, we allow Ctrl-C handling */
- if (nographic)
- tty.c_lflag &= ~ISIG;
- tty.c_cflag &= ~(CSIZE|PARENB);
- tty.c_cflag |= CS8;
- tty.c_cc[VMIN] = 1;
- tty.c_cc[VTIME] = 0;
-
- tcsetattr (0, TCSANOW, &tty);
-
- atexit(term_exit);
+ struct stat pidstat;
+ FILE *f;
- fcntl(0, F_SETFL, O_NONBLOCK);
+ /* Try to write our PID to the named file */
+ if (stat(filename, &pidstat) < 0) {
+ if (errno == ENOENT) {
+ if ((f = fopen (filename, "w")) == NULL) {
+ perror("Opening pidfile");
+ exit(1);
+ }
+ fprintf(f, "%d\n", getpid());
+ fclose(f);
+ pid_filename = qemu_strdup(filename);
+ if (!pid_filename) {
+ fprintf(stderr, "Could not save PID filename");
+ exit(1);
+ }
+ atexit(remove_pidfile);
+ }
+ } else {
+ fprintf(stderr, "%s already exists. Remove it and try again.\n",
+ filename);
+ exit(1);
+ }
}
-#endif
+/***********************************************************/
+/* dumb display */
static void dumb_update(DisplayState *ds, int x, int y, int w, int h)
{
{
if (cpu_signal_handler(host_signum, info, puc))
return;
- term_exit();
+ if (stdio_nb_clients > 0)
+ term_exit();
abort();
}
#endif
{
}
+int cpu_load(QEMUFile *f, void *opaque, int version_id)
+{
+ return 0;
+}
+#elif defined(TARGET_SPARC)
+void cpu_save(QEMUFile *f, void *opaque)
+{
+}
+
int cpu_load(QEMUFile *f, void *opaque, int version_id)
{
return 0;
#endif
}
-int main_loop(void)
+void main_loop_wait(int timeout)
{
#ifndef _WIN32
struct pollfd ufds[MAX_IO_HANDLERS + 1], *pf;
uint8_t buf[4096];
int n, max_size;
#endif
- int ret, timeout;
- CPUState *env = global_env;
-
- for(;;) {
- if (vm_running) {
- ret = cpu_exec(env);
- if (shutdown_requested) {
- ret = EXCP_INTERRUPT;
- break;
- }
- if (reset_requested) {
- reset_requested = 0;
- qemu_system_reset();
- ret = EXCP_INTERRUPT;
- }
- if (ret == EXCP_DEBUG) {
- vm_stop(EXCP_DEBUG);
- }
- /* if hlt instruction, we wait until the next IRQ */
- /* XXX: use timeout computed from timers */
- if (ret == EXCP_HLT)
- timeout = 10;
- else
- timeout = 0;
- } else {
- timeout = 10;
- }
+ int ret;
#ifdef _WIN32
if (timeout > 0)
Sleep(timeout);
#else
-
/* poll any events */
/* XXX: separate device handlers from system ones */
pf = ufds;
}
}
}
-
+#endif /* !defined(_WIN32) */
#if defined(CONFIG_SLIRP)
/* XXX: merge with poll() */
if (slirp_inited) {
slirp_select_poll(&rfds, &wfds, &xfds);
}
}
-#endif
-
#endif
if (vm_running) {
qemu_run_timers(&active_timers[QEMU_TIMER_VIRTUAL],
qemu_get_clock(vm_clock));
-
- if (audio_enabled) {
- /* XXX: add explicit timer */
- SB16_run();
- }
-
/* run dma transfers, if any */
DMA_run();
}
/* real time timers */
qemu_run_timers(&active_timers[QEMU_TIMER_REALTIME],
qemu_get_clock(rt_clock));
+}
+
+int main_loop(void)
+{
+ int ret, timeout;
+ CPUState *env = global_env;
+
+ for(;;) {
+ if (vm_running) {
+ ret = cpu_exec(env);
+ if (shutdown_requested) {
+ ret = EXCP_INTERRUPT;
+ break;
+ }
+ if (reset_requested) {
+ reset_requested = 0;
+ qemu_system_reset();
+ ret = EXCP_INTERRUPT;
+ }
+ if (ret == EXCP_DEBUG) {
+ vm_stop(EXCP_DEBUG);
+ }
+ /* if hlt instruction, we wait until the next IRQ */
+ /* XXX: use timeout computed from timers */
+ if (ret == EXCP_HLT)
+ timeout = 10;
+ else
+ timeout = 0;
+ } else {
+ timeout = 10;
+ }
+ main_loop_wait(timeout);
}
cpu_disable_ticks();
return ret;
"-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n"
"-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n"
"-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n"
- "-boot [a|b|c|d] boot on floppy (a, b), hard disk (c) or CD-ROM (d)\n"
+ "-boot [a|c|d] boot on floppy (a), hard disk (c) or CD-ROM (d)\n"
"-snapshot write to temporary files instead of disk image files\n"
"-m megs set virtual RAM size to megs MB [default=%d]\n"
"-nographic disable graphical output and redirect serial I/Os to console\n"
+ "-k language use keyboard layout (for example \"fr\" for French)\n"
"-enable-audio enable audio support\n"
"-localtime set the real time clock to local time [default=utc]\n"
+ "-full-screen start in full screen\n"
#ifdef TARGET_PPC
"-prep Simulate a PREP system (default is PowerMAC)\n"
"-g WxH[xDEPTH] Set the initial VGA graphic mode\n"
"-tun-fd fd use this fd as already opened tap/tun interface\n"
#ifdef CONFIG_SLIRP
"-user-net use user mode network stack [default if no tap/tun script]\n"
+ "-tftp prefix allow tftp access to files starting with prefix [-user-net]\n"
+#ifndef _WIN32
+ "-smb dir allow SMB access to files in 'dir' [-user-net]\n"
+#endif
+ "-redir [tcp|udp]:host-port:[guest-host]:guest-port\n"
+ " redirect TCP or UDP connections from host to guest [-user-net]\n"
#endif
"-dummy-net use dummy network stack\n"
"\n"
"-initrd file use 'file' as initial ram disk\n"
"\n"
"Debug/Expert options:\n"
+ "-monitor dev redirect the monitor to char device 'dev'\n"
+ "-serial dev redirect the serial port to char device 'dev'\n"
+ "-pidfile file Write PID to 'file'\n"
"-S freeze CPU at startup (use 'c' to start execution)\n"
"-s wait gdb connection to port %d\n"
"-p port change gdb connection port\n"
"-d item1,... output log to %s (use -d ? for a list of log items)\n"
- "-hdachs c,h,s force hard disk 0 geometry (usually qemu can guess it)\n"
+ "-hdachs c,h,s[,t] force hard disk 0 physical geometry and the optional BIOS\n"
+ " translation (t=none or lba) (usually qemu can guess them)\n"
"-L path set the directory for the BIOS and VGA BIOS\n"
#ifdef USE_CODE_COPY
"-no-code-copy disable code copy acceleration\n"
#endif
#ifdef TARGET_I386
"-isa simulate an ISA-only system (default is PCI system)\n"
+ "-std-vga simulate a standard VGA card with VESA Bochs Extensions\n"
+ " (default is CL-GD5446 PCI VGA)\n"
#endif
+ "-loadvm file start right away with a saved state (loadvm in monitor)\n"
+ "\n"
+ "During emulation, the following keys are useful:\n"
+ "ctrl-alt-f toggle full screen\n"
+ "ctrl-alt-n switch to virtual console 'n'\n"
+ "ctrl-alt toggle mouse and keyboard grab\n"
"\n"
- "During emulation, use C-a h to get terminal commands:\n",
+ "When using -nographic, press 'ctrl-a h' to get some help.\n"
+ ,
#ifdef CONFIG_SOFTMMU
"qemu",
#else
DEFAULT_NETWORK_SCRIPT,
DEFAULT_GDBSTUB_PORT,
"/tmp/qemu.log");
- term_print_help();
#ifndef CONFIG_SOFTMMU
printf("\n"
"NOTE: this version of QEMU is faster but it needs slightly patched OSes to\n"
QEMU_OPTION_n,
QEMU_OPTION_tun_fd,
QEMU_OPTION_user_net,
+ QEMU_OPTION_tftp,
+ QEMU_OPTION_smb,
+ QEMU_OPTION_redir,
QEMU_OPTION_dummy_net,
QEMU_OPTION_kernel,
QEMU_OPTION_pci,
QEMU_OPTION_isa,
QEMU_OPTION_prep,
+ QEMU_OPTION_k,
QEMU_OPTION_localtime,
QEMU_OPTION_cirrusvga,
QEMU_OPTION_g,
+ QEMU_OPTION_std_vga,
+ QEMU_OPTION_monitor,
+ QEMU_OPTION_serial,
+ QEMU_OPTION_loadvm,
+ QEMU_OPTION_full_screen,
+ QEMU_OPTION_pidfile,
};
typedef struct QEMUOption {
{ "snapshot", 0, QEMU_OPTION_snapshot },
{ "m", HAS_ARG, QEMU_OPTION_m },
{ "nographic", 0, QEMU_OPTION_nographic },
+ { "k", HAS_ARG, QEMU_OPTION_k },
{ "enable-audio", 0, QEMU_OPTION_enable_audio },
{ "nics", HAS_ARG, QEMU_OPTION_nics},
{ "tun-fd", HAS_ARG, QEMU_OPTION_tun_fd },
#ifdef CONFIG_SLIRP
{ "user-net", 0, QEMU_OPTION_user_net },
+ { "tftp", HAS_ARG, QEMU_OPTION_tftp },
+#ifndef _WIN32
+ { "smb", HAS_ARG, QEMU_OPTION_smb },
+#endif
+ { "redir", HAS_ARG, QEMU_OPTION_redir },
#endif
{ "dummy-net", 0, QEMU_OPTION_dummy_net },
#endif
{ "localtime", 0, QEMU_OPTION_localtime },
{ "isa", 0, QEMU_OPTION_isa },
+ { "std-vga", 0, QEMU_OPTION_std_vga },
+ { "monitor", 1, QEMU_OPTION_monitor },
+ { "serial", 1, QEMU_OPTION_serial },
+ { "loadvm", HAS_ARG, QEMU_OPTION_loadvm },
+ { "full-screen", 0, QEMU_OPTION_full_screen },
+ { "pidfile", HAS_ARG, QEMU_OPTION_pidfile },
/* temporary options */
{ "pci", 0, QEMU_OPTION_pci },
#endif
+/* password input */
+
+static BlockDriverState *get_bdrv(int index)
+{
+ BlockDriverState *bs;
+
+ if (index < 4) {
+ bs = bs_table[index];
+ } else if (index < 6) {
+ bs = fd_table[index - 4];
+ } else {
+ bs = NULL;
+ }
+ return bs;
+}
+
+static void read_passwords(void)
+{
+ BlockDriverState *bs;
+ int i, j;
+ char password[256];
+
+ for(i = 0; i < 6; i++) {
+ bs = get_bdrv(i);
+ if (bs && bdrv_is_encrypted(bs)) {
+ term_printf("%s is encrypted.\n", bdrv_get_device_name(bs));
+ for(j = 0; j < 3; j++) {
+ monitor_readline("Password: ",
+ 1, password, sizeof(password));
+ if (bdrv_set_key(bs, password) == 0)
+ break;
+ term_printf("invalid password\n");
+ }
+ }
+ }
+}
+
#define NET_IF_TUN 0
#define NET_IF_USER 1
#define NET_IF_DUMMY 2
const char *hd_filename[MAX_DISKS], *fd_filename[MAX_FD];
const char *kernel_filename, *kernel_cmdline;
DisplayState *ds = &display_state;
- int cyls, heads, secs;
+ int cyls, heads, secs, translation;
int start_emulation = 1;
uint8_t macaddr[6];
int net_if_type, nb_tun_fds, tun_fds[MAX_NICS];
int optind;
const char *r, *optarg;
-
+ CharDriverState *monitor_hd;
+ char monitor_device[128];
+ char serial_devices[MAX_SERIAL_PORTS][128];
+ int serial_device_index;
+ const char *loadvm = NULL;
+
#if !defined(CONFIG_SOFTMMU)
/* we never want that malloc() uses mmap() */
mallopt(M_MMAP_THRESHOLD, 4096 * 1024);
kernel_cmdline = "";
has_cdrom = 1;
cyls = heads = secs = 0;
+ translation = BIOS_ATA_TRANSLATION_AUTO;
+ pstrcpy(monitor_device, sizeof(monitor_device), "vc");
+ pstrcpy(serial_devices[0], sizeof(serial_devices[0]), "vc");
+ for(i = 1; i < MAX_SERIAL_PORTS; i++)
+ serial_devices[i][0] = '\0';
+ serial_device_index = 0;
+
nb_tun_fds = 0;
net_if_type = -1;
nb_nics = 1;
macaddr[3] = 0x12;
macaddr[4] = 0x34;
macaddr[5] = 0x56;
-
+
optind = 1;
for(;;) {
if (optind >= argc)
const char *p;
p = optarg;
cyls = strtol(p, (char **)&p, 0);
+ if (cyls < 1 || cyls > 16383)
+ goto chs_fail;
if (*p != ',')
goto chs_fail;
p++;
heads = strtol(p, (char **)&p, 0);
+ if (heads < 1 || heads > 16)
+ goto chs_fail;
if (*p != ',')
goto chs_fail;
p++;
secs = strtol(p, (char **)&p, 0);
- if (*p != '\0') {
+ if (secs < 1 || secs > 63)
+ goto chs_fail;
+ if (*p == ',') {
+ p++;
+ if (!strcmp(p, "none"))
+ translation = BIOS_ATA_TRANSLATION_NONE;
+ else if (!strcmp(p, "lba"))
+ translation = BIOS_ATA_TRANSLATION_LBA;
+ else if (!strcmp(p, "auto"))
+ translation = BIOS_ATA_TRANSLATION_AUTO;
+ else
+ goto chs_fail;
+ } else if (*p != '\0') {
chs_fail:
- cyls = 0;
+ fprintf(stderr, "qemu: invalid physical CHS format\n");
+ exit(1);
}
}
break;
case QEMU_OPTION_nographic:
+ pstrcpy(monitor_device, sizeof(monitor_device), "stdio");
+ pstrcpy(serial_devices[0], sizeof(serial_devices[0]), "stdio");
nographic = 1;
break;
case QEMU_OPTION_kernel:
break;
case QEMU_OPTION_boot:
boot_device = optarg[0];
- if (boot_device != 'a' && boot_device != 'b' &&
+ if (boot_device != 'a' &&
boot_device != 'c' && boot_device != 'd') {
fprintf(stderr, "qemu: invalid boot device '%c'\n", boot_device);
exit(1);
}
}
break;
+#ifdef CONFIG_SLIRP
+ case QEMU_OPTION_tftp:
+ tftp_prefix = optarg;
+ break;
+#ifndef _WIN32
+ case QEMU_OPTION_smb:
+ net_slirp_smb(optarg);
+ break;
+#endif
case QEMU_OPTION_user_net:
net_if_type = NET_IF_USER;
break;
+ case QEMU_OPTION_redir:
+ net_slirp_redir(optarg);
+ break;
+#endif
case QEMU_OPTION_dummy_net:
net_if_type = NET_IF_DUMMY;
break;
case QEMU_OPTION_prep:
prep_enabled = 1;
break;
+ case QEMU_OPTION_k:
+ keyboard_layout = optarg;
+ break;
case QEMU_OPTION_localtime:
rtc_utc = 0;
break;
case QEMU_OPTION_cirrusvga:
cirrus_vga_enabled = 1;
break;
+ case QEMU_OPTION_std_vga:
+ cirrus_vga_enabled = 0;
+ break;
case QEMU_OPTION_g:
{
const char *p;
graphic_depth = depth;
}
break;
+ case QEMU_OPTION_monitor:
+ pstrcpy(monitor_device, sizeof(monitor_device), optarg);
+ break;
+ case QEMU_OPTION_serial:
+ if (serial_device_index >= MAX_SERIAL_PORTS) {
+ fprintf(stderr, "qemu: too many serial ports\n");
+ exit(1);
+ }
+ pstrcpy(serial_devices[serial_device_index],
+ sizeof(serial_devices[0]), optarg);
+ serial_device_index++;
+ break;
+ case QEMU_OPTION_loadvm:
+ loadvm = optarg;
+ break;
+ case QEMU_OPTION_full_screen:
+ full_screen = 1;
+ break;
+ case QEMU_OPTION_pidfile:
+ create_pidfile(optarg);
+ break;
}
}
}
#ifdef CONFIG_SOFTMMU
#ifdef _BSD
- /* mallocs are always aligned on BSD. */
- phys_ram_base = malloc(phys_ram_size);
+ /* mallocs are always aligned on BSD. valloc is better for correctness */
+ phys_ram_base = valloc(phys_ram_size);
#else
phys_ram_base = memalign(TARGET_PAGE_SIZE, phys_ram_size);
#endif
#endif
/* we always create the cdrom drive, even if no disk is there */
+ bdrv_init();
if (has_cdrom) {
bs_table[2] = bdrv_new("cdrom");
bdrv_set_type_hint(bs_table[2], BDRV_TYPE_CDROM);
bs_table[i] = bdrv_new(buf);
}
if (bdrv_open(bs_table[i], hd_filename[i], snapshot) < 0) {
- fprintf(stderr, "qemu: could not open hard disk image '%s\n",
+ fprintf(stderr, "qemu: could not open hard disk image '%s'\n",
hd_filename[i]);
exit(1);
}
- if (i == 0 && cyls != 0)
+ if (i == 0 && cyls != 0) {
bdrv_set_geometry_hint(bs_table[i], cyls, heads, secs);
+ bdrv_set_translation_hint(bs_table[i], translation);
+ }
}
}
dumb_display_init(ds);
} else {
#ifdef CONFIG_SDL
- sdl_display_init(ds);
+ sdl_display_init(ds, full_screen);
#else
dumb_display_init(ds);
#endif
}
+ vga_console = graphic_console_init(ds);
+
+ monitor_hd = qemu_chr_open(monitor_device);
+ if (!monitor_hd) {
+ fprintf(stderr, "qemu: could not open monitor device '%s'\n", monitor_device);
+ exit(1);
+ }
+ monitor_init(monitor_hd, !nographic);
+
+ for(i = 0; i < MAX_SERIAL_PORTS; i++) {
+ if (serial_devices[i][0] != '\0') {
+ serial_hds[i] = qemu_chr_open(serial_devices[i]);
+ if (!serial_hds[i]) {
+ fprintf(stderr, "qemu: could not open serial device '%s'\n",
+ serial_devices[i]);
+ exit(1);
+ }
+ if (!strcmp(serial_devices[i], "vc"))
+ qemu_chr_printf(serial_hds[i], "serial%d console\n", i);
+ }
+ }
+
/* setup cpu signal handlers for MMU / self modifying code handling */
#if !defined(CONFIG_SOFTMMU)
ppc_init(ram_size, vga_ram_size, boot_device,
ds, fd_filename, snapshot,
kernel_filename, kernel_cmdline, initrd_filename);
+#elif defined(TARGET_SPARC)
+ sun4m_init(ram_size, vga_ram_size, boot_device,
+ ds, fd_filename, snapshot,
+ kernel_filename, kernel_cmdline, initrd_filename);
#endif
- /* launched after the device init so that it can display or not a
- banner */
- monitor_init();
-
gui_timer = qemu_new_timer(rt_clock, gui_update, NULL);
qemu_mod_timer(gui_timer, qemu_get_clock(rt_clock));
}
} else
#endif
- if (start_emulation)
+ if (loadvm)
+ qemu_loadvm(loadvm);
+
{
- vm_start();
+ /* XXX: simplify init */
+ read_passwords();
+ if (start_emulation) {
+ vm_start();
+ }
}
- term_init();
main_loop();
quit_timers();
return 0;
projects / qemu.git / blobdiff