X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;ds=sidebyside;f=BaseTools%2Ftoolsetup.bat;h=562f9932ff4d3d8c09a19d78e5938a3a7a00c1aa;hb=1f279e7a53f5a576682214a550810faff92fd9a1;hp=9b5f45e404af74b3ca657036b982dc74a2bc357e;hpb=8fc4fc3a0e3d10c2093bcdef89cc408980c44f22;p=mirror_edk2.git
diff --git a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat
old mode 100644
new mode 100755
index 9b5f45e404..562f9932ff
--- a/BaseTools/toolsetup.bat
+++ b/BaseTools/toolsetup.bat
@@ -1,121 +1,402 @@
+@REM @file
+@REM This stand-alone program is typically called by the edksetup.bat file,
+@REM however it may be executed directly from the BaseTools project folder
+@REM if the file is not executed within a WORKSPACE\BaseTools folder.
@REM
-@REM Copyright (c) 2006, Intel Corporation
-@REM All rights reserved. This program and the accompanying materials
-@REM are licensed and made available under the terms and conditions of the BSD License
-@REM which accompanies this distribution. The full text of the license may be found at
-@REM http://opensource.org/licenses/bsd-license.php
+@REM Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.
+@REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP
+@REM
+@REM This program and the accompanying materials are licensed and made available
+@REM under the terms and conditions of the BSD License which accompanies this
+@REM distribution. The full text of the license may be found at:
+@REM http://opensource.org/licenses/bsd-license.php
@REM
@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+@REM IMPLIED.
@REM
@echo off
+pushd .
-REM ##############################################################
-REM # You should not have to modify anything below this line
-REM #
+@REM ##############################################################
+@REM # You should not have to modify anything below this line
+@REM #
-if /I "%1"=="-h" goto usage
-if /I "%1"=="-help" goto usage
-if /I "%1"=="--help" goto usage
-if /I "%1"=="/h" goto usage
-if /I "%1"=="/?" goto usage
-if /I "%1"=="/help" goto usage
+if /I "%1"=="-h" goto Usage
+if /I "%1"=="-help" goto Usage
+if /I "%1"=="--help" goto Usage
+if /I "%1"=="/h" goto Usage
+if /I "%1"=="/help" goto Usage
+if /I "%1"=="/?" goto Usage
-if NOT "%1"=="" set EDK_TOOLS_PATH=%1
-REM
-REM Check the required system environment variables
-REM
+:loop
+ if "%1"=="" goto setup_workspace
+ if /I "%1"=="--nt32" (
+ if /I "%2" == "X64" (
+ shift
+ )
+ @REM Ignore --nt32 flag
+ shift
+ goto loop
+ )
+ if /I "%1"=="Reconfig" (
+ shift
+ set RECONFIG=TRUE
+ goto loop
+ )
+ if /I "%1"=="Rebuild" (
+ shift
+ set REBUILD=TRUE
+ goto loop
+ )
+ if /I "%1"=="ForceRebuild" (
+ shift
+ set FORCE_REBUILD=TRUE
+ goto loop
+ )
+ if "%1"=="" goto setup_workspace
+ if exist %1 (
+ if not defined BASE_TOOLS_PATH (
+ if exist %1\Source set BASE_TOOLS_PATH=%1
+ shift
+ goto loop
+ )
+ if not defined EDK_TOOLS_PATH (
+ if exist %1\Bin\Win32 set EDK_TOOLS_PATH=%1
+ shift
+ goto loop
+ )
+ echo.
+ echo !!! ERROR !!! Unknown argument, %1 !!!
+ echo.
+ goto end
+ ) else (
+ echo.
+ echo !!! ERROR !!! Unknown argument, %1 !!!
+ echo.
+ goto end
+ )
+ goto loop
-:check_vc
-if defined VCINSTALLDIR goto setup_workspace
-if defined VS71COMNTOOLS (
- call "%VS71COMNTOOLS%\vsvars32.bat"
-) else (
- echo.
- echo !!!WARNING!!! Cannot find Visual Studio !!!
- echo.
-)
+
+@REM
+@REM Check the required system environment variables
+@REM
:setup_workspace
+ REM
+ REM check the EDK_TOOLS_PATH
+ REM
+ if not defined EDK_TOOLS_PATH goto no_EDK_TOOLS_PATH
+ if exist %EDK_TOOLS_PATH% goto set_PATH
+
+:no_EDK_TOOLS_PATH
+ if not defined WORKSPACE (
+ if defined BASE_TOOLS_PATH (
+ set EDK_TOOLS_PATH=%BASE_TOOLS_PATH%
+ goto set_PATH
+ ) else (
+ echo.
+ echo !!! ERROR !!! Neither BASE_TOOLS_PATH nor EDK_TOOLS_PATH are set. !!!
+ echo.
+ goto end
+ )
+ ) else (
+ if exist %WORKSPACE%\BaseTools\Bin (
+ set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
+ goto set_PATH
+ ) else (
+ echo.
+ echo !!! ERROR !!! No tools path available. Please set EDK_TOOLS_PATH !!!
+ echo.
+ goto end
+ )
+ )
+
+:set_PATH
+ if defined WORKSPACE_TOOLS_PATH goto check_PATH
+ if not defined EDK_TOOLS_BIN (
+ set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32
+ if not exist %EDK_TOOLS_PATH%\Bin\Win32 (
+ echo.
+ echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!
+ echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32
+ echo Or configure EDK_TOOLS_BIN env to point Win32 directory.
+ echo.
+ )
+ )
+ set PATH=%EDK_TOOLS_BIN%;%PATH%
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ goto PATH_ok
+
+:check_PATH
+ if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto PATH_ok
+ if not defined EDK_TOOLS_BIN (
+ set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32
+ if not exist %EDK_TOOLS_PATH%\Bin\Win32 (
+ echo.
+ echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!
+ echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32
+ echo Or configure EDK_TOOLS_BIN env to point Win32 directory.
+ echo.
+ )
+ )
+ set PATH=%EDK_TOOLS_BIN%;%PATH%
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this session.
+
+:PATH_ok
REM
-REM check the EDK_TOOLS_PATH
+REM copy *.template to %CONF_PATH%
REM
-if not defined EDK_TOOLS_PATH goto no_tools_path
-if exist %EDK_TOOLS_PATH% goto set_path
-echo.
-echo !!!WARNING!!! %EDK_TOOLS_PATH% doesn't exist. %WORKSPACE%\Tools will be used !!!
-echo.
+if not defined WORKSPACE (
+ if defined RECONFIG (
+ echo.
+ echo !!! WARNING !!! WORKSPACE environment variable was not set, cannot Reconfig !!!
+ echo.
+ )
+ goto skip_reconfig
+)
-:no_tools_path
-if exist %WORKSPACE%\BaseTools (
- set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
-) else (
- echo.
- echo !!!WARNING!!! No tools path found. Please set EDK_TOOLS_PATH !!!
- echo.
+IF NOT exist "%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
+ @echo.
+ @echo !!! ERROR !!! The set_vsprefix_envs.bat was not found !!!
+ @echo.
goto end
)
+call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat
-:set_path
-if defined WORKSPACE_TOOLS_PATH goto check_path
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
-goto path_ok
+if not defined CONF_PATH (
+ set CONF_PATH=%WORKSPACE%\Conf
+)
-:check_path
-if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto path_ok
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
-echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this WORKSPACE
+if NOT exist %CONF_PATH% (
+ if defined PACKAGES_PATH (
+ for %%i IN (%PACKAGES_PATH%) DO (
+ if exist %%~fi\Conf (
+ set CONF_PATH=%%i\Conf
+ goto CopyConf
+ )
+ )
+ )
+)
+
+:CopyConf
+if NOT exist %CONF_PATH% (
+ mkdir %CONF_PATH%
+) else (
+ if defined RECONFIG (
+ echo.
+ echo Over-writing the files in the CONF_PATH directory
+ echo using the default template files
+ echo.
+ )
+)
-:path_ok
-echo PATH = %PATH%
-echo.
-echo WORKSPACE = %WORKSPACE%
-echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%
-echo.
+if NOT exist %CONF_PATH%\target.txt (
+ echo copying ... target.template to %CONF_PATH%\target.txt
+ if NOT exist %EDK_TOOLS_PATH%\Conf\target.template (
+ echo Error: target.template is missing at folder %EDK_TOOLS_PATH%\Conf\
+ )
+ copy %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul
+) else (
+ if defined RECONFIG echo over-write ... target.template to %CONF_PATH%\target.txt
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul
+)
-REM
-REM copy *.template to %WORKSPACE%\Conf
-REM
-if NOT exist %WORKSPACE%\Conf mkdir %WORKSPACE%\Conf
-if NOT exist %WORKSPACE%\Conf\FrameworkDatabase.db (
- echo copying ... FrameworkDatabase.template to %WORKSPACE%\Conf\FrameworkDatabase.db
- copy %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul
+if NOT exist %CONF_PATH%\tools_def.txt (
+ echo copying ... tools_def.template to %CONF_PATH%\tools_def.txt
+ if NOT exist %EDK_TOOLS_PATH%\Conf\tools_def.template (
+ echo Error: tools_def.template is missing at folder %EDK_TOOLS_PATH%\Conf\
+ )
+ copy %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul
+) else (
+ if defined RECONFIG echo over-write ... tools_def.template to %CONF_PATH%\tools_def.txt
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul
)
-if NOT exist %WORKSPACE%\Conf\target.txt (
- echo copying ... target.template to %WORKSPACE%\Conf\target.txt
- copy %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul
+
+if NOT exist %CONF_PATH%\build_rule.txt (
+ echo copying ... build_rule.template to %CONF_PATH%\build_rule.txt
+ if NOT exist %EDK_TOOLS_PATH%\Conf\build_rule.template (
+ echo Error: build_rule.template is missing at folder %EDK_TOOLS_PATH%\Conf\
+ )
+ copy %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul
+) else (
+ if defined RECONFIG echo over-write ... build_rule.template to %CONF_PATH%\build_rule.txt
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul
+)
+
+echo PATH = %PATH%
+echo.
+if defined WORKSPACE (
+ echo WORKSPACE = %WORKSPACE%
)
-if NOT exist %WORKSPACE%\Conf\tools_def.txt (
- echo copying ... tools_def.template to %WORKSPACE%\Conf\tools_def.txt
- copy %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul
+if defined PACKAGES_PATH (
+ echo PACKAGES_PATH = %PACKAGES_PATH%
)
-if NOT exist %WORKSPACE%\Conf\build_rule.txt (
- echo copying ... build_rule.template to %WORKSPACE%\Conf\build_rule.txt
- copy %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul
+echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%
+if defined BASE_TOOLS_PATH (
+ echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH%
)
+if defined EDK_TOOLS_BIN (
+ echo EDK_TOOLS_BIN = %EDK_TOOLS_BIN%
+)
+echo CONF_PATH = %CONF_PATH%
+echo.
-REM
-REM copy XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema
-REM
-REM echo copying ... XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema
-REM xcopy %WORKSPACE%\Conf\XMLSchema %EDK_TOOLS_PATH%\Conf\XMLSchema /S /I /D /F /Q > nul
+:skip_reconfig
+
+@REM
+@REM Test if we are going to have to do a build
+@REM
+if defined FORCE_REBUILD goto check_build_environment
+if defined REBUILD goto check_build_environment
+if not exist "%EDK_TOOLS_PATH%" goto check_build_environment
+if not exist "%EDK_TOOLS_BIN%" goto check_build_environment
+
+IF NOT EXIST "%EDK_TOOLS_BIN%\BootSectImage.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\EfiLdrImage.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\EfiRom.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenBootSector.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFfs.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFv.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFw.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenPage.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenSec.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenVtf.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\Split.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\TianoCompress.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\VfrCompile.exe" goto check_c_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\VolInfo.exe" goto check_c_tools
+
+goto check_python_tools
+
+:check_c_tools
+ echo.
+ echo !!! ERROR !!! Binary C tools are missing. They are requried to be built from BaseTools Source.
+ echo.
+ goto check_build_environment
+
+:check_python_tools
+IF NOT EXIST "%EDK_TOOLS_BIN%\build.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFds.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_BIN%\TargetTool.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_BIN%\Trim.exe" goto check_build_environment
-REM
-REM Done!!!
-REM
goto end
-:usage
-echo.
-echo "Usage: %0 [/? | /h | /help | -h | -help | --help] [tools_path]"
-echo.
-echo tools_path Tools' path. EDK_TOOLS_PATH will be set to this path.
-echo.
+:check_build_environment
+ if defined BASETOOLS_PYTHON_SOURCE goto VisualStudioAvailable
+
+ if not defined BASE_TOOLS_PATH (
+ if not exist "Source\C\Makefile" (
+ if not exist "%EDK_TOOLS_PATH%\Source\C\Makefile" goto no_source_files
+ set BASE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ ) else (
+ set BASE_TOOLS_PATH=%CD%
+ )
+ )
+
+ if not defined PYTHON_HOME (
+ if defined PYTHONHOME (
+ set PYTHON_HOME=%PYTHONHOME%
+ ) else (
+ echo.
+ echo !!! ERROR !!! Binary python tools are missing. PYTHON_HOME environment variable is not set.
+ echo PYTHON_HOME is required to build or execute the python tools.
+ echo.
+ goto end
+ )
+ )
+
+ @REM We have Python, now test for FreezePython application
+ if not defined PYTHON_FREEZER_PATH (
+ echo.
+ echo !!! WARNING !!! PYTHON_FREEZER_PATH environment variable is not set.
+ echo Setup environment to run Python scripts directly.
+ echo.
+ set "PATH=%BASE_TOOLS_PATH%\BinWrappers\WindowsLike;%PATH%"
+ )
+
+ set BASETOOLS_PYTHON_SOURCE=%BASE_TOOLS_PATH%\Source\Python
+ set PYTHONPATH=%BASETOOLS_PYTHON_SOURCE%;%PYTHONPATH%
+
+ echo PATH = %PATH%
+ echo PYTHON_HOME = %PYTHON_HOME%
+ echo PYTHONPATH = %PYTHONPATH%
+ if defined PYTHON_FREEZER_PATH (
+ echo PYTHON_FREEZER_PATH = %PYTHON_FREEZER_PATH%
+ )
+ echo.
+
+:VisualStudioAvailable
+ if not defined FORCE_REBUILD (
+ if not defined REBUILD (
+ goto end
+ )
+ )
+ call "%EDK_TOOLS_PATH%\get_vsvars.bat"
+ if not defined VCINSTALLDIR (
+ @echo.
+ @echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!!
+ @echo.
+ goto end
+ )
+ if not defined FORCE_REBUILD goto IncrementalBuild
+
+:CleanAndBuild
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake cleanall
+ del /f /q %BASE_TOOLS_PATH%\Bin\Win32\*.*
+ popd
+ @REM Let CleanAndBuild fall through to IncrementalBuild
+
+
+:IncrementalBuild
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake c
+ popd
+
+ if defined PYTHON_FREEZER_PATH (
+ echo BUILDING PYTHON TOOLS
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake python
+ popd
+ ) else (
+ echo.
+ echo !!! WARNING !!! Cannot make executable from Python code, executing python scripts instead !!!
+ echo.
+ )
+ goto end
+
+
+:no_source_files
+ echo.
+ echo !!! ERROR !!! Cannot build BaseTools applications - no source directory located !!!
+ echo.
+ goto end
+
+:Usage
+ @echo.
+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]"
+ @echo.
+ @echo base_tools_path BaseTools project path, BASE_TOOLS_PATH will be set to this path.
+ @echo edk_tools_path EDK_TOOLS_PATH will be set to this path.
+ @echo Rebuild If sources are available perform an Incremental build, only
+ @echo build those updated tools.
+ @echo ForceRebuild If sources are available, rebuild all tools regardless of
+ @echo whether they have been updated or not.
+ @echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.
+ @echo.
:end
-@echo on
+set REBUILD=
+set FORCE_REBUILD=
+set RECONFIG=
+popd