X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FBus%2FPci%2FNonDiscoverablePciDeviceDxe%2FNonDiscoverablePciDeviceIo.c;h=c3e83003a01c5e79c7b04e82d84722a2bd885ad1;hb=3b9cd714542a8744252d973e1f163222a9f21b9e;hp=f9b13a5240550e047c35cf87fa9c50baff6aa59a;hpb=1525ff38cbbdba0b97c43b73183b6d9aa2c7fb93;p=mirror_edk2.git
diff --git a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
index f9b13a5240..c3e83003a0 100644
--- a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
+++ b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
@@ -3,13 +3,7 @@
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
Copyright (c) 2016, Linaro, Ltd. All rights reserved.
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -28,9 +22,14 @@ typedef struct {
UINTN NumberOfBytes;
} NON_DISCOVERABLE_PCI_DEVICE_MAP_INFO;
-//
-// Get the resource associated with BAR number 'BarIndex'.
-//
+/**
+ Get the resource associated with BAR number 'BarIndex'.
+
+ @param Dev Point to the NON_DISCOVERABLE_PCI_DEVICE instance.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param Descriptor Points to the address space descriptor
+**/
STATIC
EFI_STATUS
GetBarResource (
@@ -47,6 +46,10 @@ GetBarResource (
BarIndex -= (UINT8)Dev->BarOffset;
+ if (BarIndex >= Dev->BarCount) {
+ return EFI_UNSUPPORTED;
+ }
+
for (Desc = Dev->Device->Resources;
Desc->Desc != ACPI_END_TAG_DESCRIPTOR;
Desc = (VOID *)((UINT8 *)Desc + Desc->Len + 3)) {
@@ -61,6 +64,21 @@ GetBarResource (
return EFI_NOT_FOUND;
}
+/**
+ Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is
+ satisfied or after a defined duration.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param Offset The offset within the selected BAR to start the memory operation.
+ @param Mask Mask used for the polling criteria.
+ @param Value The comparison value used for the polling exit criteria.
+ @param Delay The number of 100 ns units to poll.
+ @param Result Pointer to the last value read from the memory location.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -75,10 +93,50 @@ PciIoPollMem (
OUT UINT64 *Result
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+ UINTN Count;
+ EFI_STATUS Status;
+
+ if ((UINT32)Width > EfiPciIoWidthUint64) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Result == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+ Count = 1;
+
+ Status = GetBarResource (Dev, BarIndex, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Offset + (Count << (Width & 0x3)) > Desc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
+/**
+ Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is
+ satisfied or after a defined duration.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param Offset The offset within the selected BAR to start the memory operation.
+ @param Mask Mask used for the polling criteria.
+ @param Value The comparison value used for the polling exit criteria.
+ @param Delay The number of 100 ns units to poll.
+ @param Result Pointer to the last value read from the memory location.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -93,10 +151,51 @@ PciIoPollIo (
OUT UINT64 *Result
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+ UINTN Count;
+ EFI_STATUS Status;
+
+ if ((UINT32)Width > EfiPciIoWidthUint64) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Result == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+ Count = 1;
+
+ Status = GetBarResource (Dev, BarIndex, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Offset + (Count << (Width & 0x3)) > Desc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param Width Signifies the width of the memory or I/O operations.
+ @param Count The number of memory or I/O operations to perform.
+ @param DstStride The stride of the destination buffer.
+ @param Dst For read operations, the destination buffer to store the results. For write
+ operations, the destination buffer to write data to.
+ @param SrcStride The stride of the source buffer.
+ @param Src For read operations, the source buffer to read data from. For write
+ operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -148,6 +247,26 @@ PciIoMemRW (
return EFI_SUCCESS;
}
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory or I/O operation to perform.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
+ valid for the PCI BAR specified by BarIndex.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -215,6 +334,26 @@ PciIoMemRead (
return EFI_INVALID_PARAMETER;
}
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory or I/O operation to perform.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
+ valid for the PCI BAR specified by BarIndex.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -282,6 +421,19 @@ PciIoMemWrite (
return EFI_INVALID_PARAMETER;
}
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory or I/O operation to perform.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -294,10 +446,46 @@ PciIoIoRead (
IN OUT VOID *Buffer
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+ EFI_STATUS Status;
+
+ if ((UINT32)Width >= EfiPciIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+
+ Status = GetBarResource (Dev, BarIndex, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Offset + (Count << (Width & 0x3)) > Desc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory or I/O operation to perform.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -310,10 +498,44 @@ PciIoIoWrite (
IN OUT VOID *Buffer
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+ EFI_STATUS Status;
+
+ if ((UINT32)Width >= EfiPciIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+
+ Status = GetBarResource (Dev, BarIndex, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Offset + (Count << (Width & 0x3)) > Desc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
+/**
+ Enable a PCI driver to access PCI config space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -337,6 +559,11 @@ PciIoPciRead (
Address = (UINT8 *)&Dev->ConfigSpace + Offset;
Length = Count << ((UINTN)Width & 0x3);
+ if (Offset >= sizeof (Dev->ConfigSpace)) {
+ ZeroMem (Buffer, Length);
+ return EFI_SUCCESS;
+ }
+
if (Offset + Length > sizeof (Dev->ConfigSpace)) {
//
// Read all zeroes for config space accesses beyond the first
@@ -350,6 +577,22 @@ PciIoPciRead (
return PciIoMemRW (Width, Count, 1, Buffer, 1, Address);
}
+/**
+ Enable a PCI driver to access PCI config space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
+ valid for the PCI BAR specified by BarIndex.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -378,6 +621,24 @@ PciIoPciWrite (
return PciIoMemRW (Width, Count, 1, Address, 1, Buffer);
}
+/**
+ Enables a PCI driver to copy one region of PCI memory space to another region of PCI
+ memory space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory operations.
+ @param DestBarIndex The BAR index in the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param DestOffset The destination offset within the BAR specified by DestBarIndex to
+ start the memory writes for the copy operation.
+ @param SrcBarIndex The BAR index in the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param SrcOffset The source offset within the BAR specified by SrcBarIndex to start
+ the memory reads for the copy operation.
+ @param Count The number of memory operations to perform. Bytes moved is Width
+ size * Count, starting at DestOffset and SrcOffset.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -391,10 +652,58 @@ PciIoCopyMem (
IN UINTN Count
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *DestDesc;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *SrcDesc;
+ EFI_STATUS Status;
+
+ if ((UINT32)Width > EfiPciIoWidthUint64) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+
+ Status = GetBarResource (Dev, DestBarIndex, &DestDesc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (DestOffset + (Count << (Width & 0x3)) > DestDesc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = GetBarResource (Dev, SrcBarIndex, &SrcDesc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (SrcOffset + (Count << (Width & 0x3)) > SrcDesc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
+/**
+ Provides the PCI controller-specific addresses needed to access system memory.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -411,13 +720,26 @@ CoherentPciIoMap (
EFI_STATUS Status;
NON_DISCOVERABLE_PCI_DEVICE_MAP_INFO *MapInfo;
+ if (Operation != EfiPciIoOperationBusMasterRead &&
+ Operation != EfiPciIoOperationBusMasterWrite &&
+ Operation != EfiPciIoOperationBusMasterCommonBuffer) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (HostAddress == NULL ||
+ NumberOfBytes == NULL ||
+ DeviceAddress == NULL ||
+ Mapping == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
//
// If HostAddress exceeds 4 GB, and this device does not support 64-bit DMA
// addressing, we need to allocate a bounce buffer and copy over the data.
//
Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
if ((Dev->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) == 0 &&
- (UINTN)HostAddress + *NumberOfBytes > SIZE_4GB) {
+ (EFI_PHYSICAL_ADDRESS)(UINTN)HostAddress + *NumberOfBytes > SIZE_4GB) {
//
// Bounce buffering is not possible for consistent mappings
@@ -461,6 +783,15 @@ CoherentPciIoMap (
return EFI_SUCCESS;
}
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -484,6 +815,25 @@ CoherentPciIoUnmap (
return EFI_SUCCESS;
}
+/**
+ Allocates pages.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -506,6 +856,11 @@ CoherentPciIoAllocateBuffer (
return EFI_UNSUPPORTED;
}
+ if ((MemoryType != EfiBootServicesData) &&
+ (MemoryType != EfiRuntimeServicesData)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
//
// Allocate below 4 GB if the dual address cycle attribute has not
// been set. If the system has no memory available below 4 GB, there
@@ -526,6 +881,16 @@ CoherentPciIoAllocateBuffer (
return Status;
}
+/**
+ Frees memory that was allocated in function CoherentPciIoAllocateBuffer ().
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -539,6 +904,17 @@ CoherentPciIoFreeBuffer (
return EFI_SUCCESS;
}
+/**
+ Frees memory that was allocated in function NonCoherentPciIoAllocateBuffer ().
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval others The operation contain some errors.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -604,6 +980,25 @@ FreeAlloc:
return Status;
}
+/**
+ Allocates pages.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -623,6 +1018,10 @@ NonCoherentPciIoAllocateBuffer (
NON_DISCOVERABLE_DEVICE_UNCACHED_ALLOCATION *Alloc;
VOID *AllocAddress;
+ if (HostAddress == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
Status = CoherentPciIoAllocateBuffer (This, Type, MemoryType, Pages,
@@ -702,6 +1101,25 @@ FreeBuffer:
return Status;
}
+/**
+ Provides the PCI controller-specific addresses needed to access system memory.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -722,6 +1140,19 @@ NonCoherentPciIoMap (
EFI_GCD_MEMORY_SPACE_DESCRIPTOR GcdDescriptor;
BOOLEAN Bounce;
+ if (HostAddress == NULL ||
+ NumberOfBytes == NULL ||
+ DeviceAddress == NULL ||
+ Mapping == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Operation != EfiPciIoOperationBusMasterRead &&
+ Operation != EfiPciIoOperationBusMasterWrite &&
+ Operation != EfiPciIoOperationBusMasterCommonBuffer) {
+ return EFI_INVALID_PARAMETER;
+ }
+
MapInfo = AllocatePool (sizeof *MapInfo);
if (MapInfo == NULL) {
return EFI_OUT_OF_RESOURCES;
@@ -738,7 +1169,7 @@ NonCoherentPciIoMap (
// a bounce buffer and copy over the data in case HostAddress >= 4 GB.
//
Bounce = ((Dev->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) == 0 &&
- (UINTN)HostAddress + *NumberOfBytes > SIZE_4GB);
+ (EFI_PHYSICAL_ADDRESS)(UINTN)HostAddress + *NumberOfBytes > SIZE_4GB);
if (!Bounce) {
switch (Operation) {
@@ -816,6 +1247,15 @@ FreeMapInfo:
return Status;
}
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -859,6 +1299,12 @@ NonCoherentPciIoUnmap (
return EFI_SUCCESS;
}
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -869,6 +1315,19 @@ PciIoFlush (
return EFI_SUCCESS;
}
+/**
+ Retrieves this PCI controller's current PCI bus number, device number, and function number.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param SegmentNumber The PCI controller's current PCI segment number.
+ @param BusNumber The PCI controller's current PCI bus number.
+ @param DeviceNumber The PCI controller's current PCI device number.
+ @param FunctionNumber The PCI controller's current PCI function number.
+
+ @retval EFI_SUCCESS The PCI controller location was returned.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -880,6 +1339,8 @@ PciIoGetLocation (
OUT UINTN *FunctionNumber
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+
if (SegmentNumber == NULL ||
BusNumber == NULL ||
DeviceNumber == NULL ||
@@ -887,14 +1348,35 @@ PciIoGetLocation (
return EFI_INVALID_PARAMETER;
}
- *SegmentNumber = 0;
- *BusNumber = 0xff;
- *DeviceNumber = 0;
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+
+ *SegmentNumber = 0xff;
+ *BusNumber = Dev->UniqueId >> 5;
+ *DeviceNumber = Dev->UniqueId & 0x1f;
*FunctionNumber = 0;
return EFI_SUCCESS;
}
+/**
+ Performs an operation on the attributes that this PCI controller supports. The operations include
+ getting the set of supported attributes, retrieving the current attributes, setting the current
+ attributes, enabling attributes, and disabling attributes.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Operation The operation to perform on the attributes for this PCI controller.
+ @param Attributes The mask of attributes that are used for Set, Enable, and Disable
+ operations.
+ @param Result A pointer to the result mask of attributes that are returned for the Get
+ and Supported operations.
+
+ @retval EFI_SUCCESS The operation on the PCI controller's attributes was completed.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_UNSUPPORTED one or more of the bits set in
+ Attributes are not supported by this PCI controller or one of
+ its parent bridges when Operation is Set, Enable or Disable.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -910,6 +1392,10 @@ PciIoAttributes (
Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+ if ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
Enable = FALSE;
switch (Operation) {
case EfiPciIoAttributeOperationGet:
@@ -923,7 +1409,7 @@ PciIoAttributes (
if (Result == NULL) {
return EFI_INVALID_PARAMETER;
}
- *Result = EFI_PCI_DEVICE_ENABLE | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE;
+ *Result = DEV_SUPPORTED_ATTRIBUTES;
break;
case EfiPciIoAttributeOperationEnable:
@@ -952,6 +1438,28 @@ PciIoAttributes (
return EFI_SUCCESS;
}
+/**
+ Gets the attributes that this PCI controller supports setting on a BAR using
+ SetBarAttributes(), and retrieves the list of resource descriptors for a BAR.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for resource range. The legal range for this field is 0..5.
+ @param Supports A pointer to the mask of attributes that this PCI controller supports
+ setting for this BAR with SetBarAttributes().
+ @param Resources A pointer to the ACPI 2.0 resource descriptors that describe the current
+ configuration of this BAR of the PCI controller.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI
+ controller supports are returned in Supports. If Resources
+ is not NULL, then the ACPI 2.0 resource descriptors that the PCI
+ controller is currently using are returned in Resources.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to allocate
+ Resources.
+
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -963,7 +1471,8 @@ PciIoGetBarAttributes (
)
{
NON_DISCOVERABLE_PCI_DEVICE *Dev;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor, *BarDesc;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *BarDesc;
EFI_ACPI_END_TAG_DESCRIPTOR *End;
EFI_STATUS Status;
@@ -1003,6 +1512,19 @@ PciIoGetBarAttributes (
return EFI_SUCCESS;
}
+/**
+ Sets the attributes for a range of a BAR on a PCI controller.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Attributes The mask of attributes to set for the resource range specified by
+ BarIndex, Offset, and Length.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for resource range. The legal range for this field is 0..5.
+ @param Offset A pointer to the BAR relative base address of the resource range to be
+ modified by the attributes specified by Attributes.
+ @param Length A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+**/
STATIC
EFI_STATUS
EFIAPI
@@ -1014,6 +1536,33 @@ PciIoSetBarAttributes (
IN OUT UINT64 *Length
)
{
+ NON_DISCOVERABLE_PCI_DEVICE *Dev;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+ EFI_PCI_IO_PROTOCOL_WIDTH Width;
+ UINTN Count;
+ EFI_STATUS Status;
+
+ if ((Attributes & (~DEV_SUPPORTED_ATTRIBUTES)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (Offset == NULL || Length == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
+ Width = EfiPciIoWidthUint8;
+ Count = (UINT32) *Length;
+
+ Status = GetBarResource(Dev, BarIndex, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (*Offset + (Count << (Width & 0x3)) > Desc->AddrLen) {
+ return EFI_UNSUPPORTED;
+ }
+
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
@@ -1039,6 +1588,12 @@ STATIC CONST EFI_PCI_IO_PROTOCOL PciIoTemplate =
0
};
+/**
+ Initialize PciIo Protocol.
+
+ @param Dev Point to NON_DISCOVERABLE_PCI_DEVICE instance.
+
+**/
VOID
InitializePciIoProtocol (
NON_DISCOVERABLE_PCI_DEVICE *Dev