X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=12b77a6ca44963a02816ff0a10ce19a99099996c;hb=627e117a727c3ba93ce8fce697f7b9dbe654c408;hp=93ae120f54824df4b568402a6a63d585f9c63c17;hpb=db9b00f1d58516fec77df359e99ee60ed3da0278;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 93ae120f54..12b77a6ca4 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -111,6 +111,10 @@
## @libraryclass Provides core boot manager functions
PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.
+ #
+ TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -168,6 +172,10 @@
# Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+ ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
+ # Include/Guid/AuthenticatedVariableFormat.h
+ gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
+
# Include/Guid/VariableIndexTable.h
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
@@ -413,6 +421,15 @@
## Include/Protocol/EsrtManagement.h
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
+ ## Include/Protocol/SmmExitBootServices.h
+ gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
+
+ ## Include/Protocol/SmmLegacyBoot.h
+ gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
+
+ ## Include/Protocol/SmmReadyToBoot.h
+ gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -717,6 +734,11 @@
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
+ ## The maximum size of a single authenticated variable.
+ # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
+ # @Prompt Maximum authenticated variable size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
+
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
@@ -856,26 +878,6 @@
# @Prompt Shadow Peim On S3 Boot.
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
- ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
- # @Prompt Default OEM ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
-
- ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
- # @Prompt Default OEM Table ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
-
- ## Default OEM Revision for ACPI table creation.
- # @Prompt Default OEM Revision for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
-
- ## Default Creator ID for ACPI table creation.
- # @Prompt Default Creator ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
-
- ## Default Creator Revision for ACPI table creation.
- # @Prompt Default Creator Revision for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
-
## The mask is used to control memory profile behavior.
# BIT0 - Enable UEFI memory profile.
# BIT1 - Enable SMRAM profile.
@@ -910,10 +912,6 @@
# @Prompt Memory profile memory type.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
- ## UART clock frequency is for the baud rate configuration.
- # @Prompt Serial Port Clock Rate.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
-
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
# information that describes the path that contains zero or more PCI to PCI briges
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
@@ -988,6 +986,14 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## UART clock frequency is for the baud rate configuration.
+ # @Prompt Serial Port Clock Rate.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
+
+ ## This PCD points to the front page formset GUID
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
+
## Base address of the NV variable range in flash device.
# @Prompt Base address of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
@@ -1281,6 +1287,48 @@
# @Prompt Flag to request system reboot after processing capsule.
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
+ ## Publish PropertiesTable or not.
+ #
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
+ #
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
+ #
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
+ # section. If PE code/data sections are merged, the result is unpredictable.
+ #
+ # @Prompt Publish UEFI PropertiesTable.
+ gEfiMdeModulePkgTokenSpaceGuid.PropertiesTableEnable|TRUE|BOOLEAN|0x0000006e
+
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
+ # @Prompt Default OEM ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
+
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
+ # @Prompt Default OEM Table ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
+
+ ## Default OEM Revision for ACPI table creation.
+ # @Prompt Default OEM Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
+
+ ## Default Creator ID for ACPI table creation.
+ # @Prompt Default Creator ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
+
+ ## Default Creator Revision for ACPI table creation.
+ # @Prompt Default Creator Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.