X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=217ede1f716382b6abdfbb11984c56496b6af3a0;hb=ebe34c96f473b9b7389f1f05a29c0bdb3fe36ac3;hp=b28677b2df333b8b4ede2b2310e80d7c92c85b2a;hpb=e0ac9c8a9bd67ab934bca86504706b5400cde558;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index b28677b2df..217ede1f71 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -3,9 +3,11 @@
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
+# Copyright (c) 2017, AMD Incorporated. All rights reserved.
+# Copyright (c) 2016, Microsoft Corporation
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
@@ -22,7 +24,7 @@
PACKAGE_NAME = MdeModulePkg
PACKAGE_UNI_FILE = MdeModulePkg.uni
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
- PACKAGE_VERSION = 0.96
+ PACKAGE_VERSION = 0.98
[Includes]
Include
@@ -52,6 +54,9 @@
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
+ ## @libraryclass Defines a set of helper functions for resetting the system.
+ ResetUtilityLib|Include/Library/ResetUtilityLib.h
+
## @libraryclass Defines a set of methods related do S3 mode.
# This library class is no longer used and modules using this library should
# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
@@ -137,10 +142,6 @@
#
FileExplorerLib|Include/Library/FileExplorerLib.h
- ## @libraryclass Provides image decoding service.
- #
- ImageDecoderLib|Include/Library/ImageDecoderLib.h
-
## @libraryclass Provides interfaces about logo display.
#
BootLogoLib|Include/Library/BootLogoLib.h
@@ -157,6 +158,30 @@
#
MemoryProfileLib|Include/Library/MemoryProfileLib.h
+ ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
+ ##
+ FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
+
+ ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.
+ #
+ FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
+
+ ## @libraryclass Provides a service to register non-discoverable device
+ ##
+ NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
+
+ ## @libraryclass Provides services to convert a BMP graphics image to a GOP BLT buffer
+ # and to convert a GOP BLT buffer to a BMP graphics image.
+ #
+ BmpSupportLib|Include/Library/BmpSupportLib.h
+
+ ## @libraryclass Provides services to display completion progress when
+ # processing a firmware update that updates the firmware image in a firmware
+ # device. A platform may provide its own instance of this library class to
+ # customize how a user is informed of completion progress.
+ #
+ DisplayUpdateProgressLib|Include/Library/DisplayUpdateProgressLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -174,6 +199,10 @@
# Include/Guid/MdeModuleHii.h
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
+ ## Guid for EDKII implementation extension, used to indaicate there are bit fields in the varstore.
+ # Include/Guid/MdeModuleHii.h
+ gEdkiiIfrBitVarstoreGuid = {0x82DDD68B, 0x9163, 0x4187, {0x9B, 0x27, 0x20, 0xA8, 0xFD, 0x60,0xA7, 0x1D}}
+
## Guid for Framework vfr GUIDed opcodes.
# Include/Guid/MdeModuleHii.h
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
@@ -231,6 +260,9 @@
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
+ # Include/Guid/PerformanceMeasurement.h
+ gEdkiiPerformanceMeasurementProtocolGuid = { 0xc85d06be, 0x5f75, 0x48ce, { 0xa8, 0x0f, 0x12, 0x36, 0xba, 0x3b, 0x87, 0xb1 } }
+ gEdkiiSmmPerformanceMeasurementProtocolGuid = { 0xd56b6d73, 0x1a7b, 0x4015, { 0x9b, 0xb4, 0x7b, 0x07, 0x17, 0x29, 0xed, 0x24 } }
## Guid is defined for CRC32 encapsulation scheme.
# Include/Guid/Crc32GuidedSectionExtraction.h
@@ -271,6 +303,9 @@
## Include/Guid/RecoveryDevice.h
gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnFatNvmeDiskGuid = { 0xC770A27F, 0x956A, 0x497A, { 0x85, 0x48, 0xE0, 0x61, 0x97, 0x58, 0x8B, 0xF6 }}
+
## Include/Guid/SmmLockBox.h
gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
@@ -336,6 +371,9 @@
## Include/Protocol/VarErrorFlag.h
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
+ ## GUID indicates the BROTLI custom compress/decompress algorithm.
+ gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}
+
## GUID indicates the LZMA custom compress/decompress algorithm.
# Include/Guid/LzmaDecompress.h
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
@@ -355,6 +393,35 @@
## Include/Guid/PiSmmCommunicationRegionTable.h
gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
+ ## Include/Guid/PiSmmMemoryAttributesTable.h
+ gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
+
+ ## Include/Guid/SmiHandlerProfile.h
+ gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
+
+ ## Include/Guid/NonDiscoverableDevice.h
+ gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
+ gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
+ gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
+ gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
+ gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
+ gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
+ gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
+ gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
+ gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
+
+ ## Include/Guid/PlatformHasAcpi.h
+ gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
+
+ ## Include/Guid/ExtendedFirmwarePerformance.h
+ gEdkiiFpdtExtendedFirmwarePerformanceGuid = { 0x3b387bfd, 0x7abc, 0x4cf2, { 0xa0, 0xca, 0xb6, 0xa1, 0x6c, 0x1b, 0x1b, 0x25 } }
+
+ ## Include/Guid/EndofS3Resume.h
+ gEdkiiEndOfS3ResumeGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }
+
+ ## Include/Guid/S3SmmInitDone.h
+ gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -398,6 +465,21 @@
## Include/Ppi/SdMmcHostController.h
gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
+ ## Include/Ppi/IoMmu.h
+ gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }
+
+ ## Include/Ppi/PlatformSpecificResetFilter.h
+ gEdkiiPlatformSpecificResetFilterPpiGuid = { 0x8c9f4de3, 0x7b90, 0x47ef, { 0x93, 0x8, 0x28, 0x7c, 0xec, 0xd6, 0x6d, 0xe8 } }
+
+ ## Include/Ppi/PlatformSpecificResetNotification.h
+ gEdkiiPlatformSpecificResetNotificationPpiGuid = { 0xe09f355d, 0xdae8, 0x4910, { 0xb1, 0x4a, 0x92, 0x78, 0xf, 0xdc, 0xf7, 0xcb } }
+
+ ## Include/Ppi/PlatformSpecificResetHandler.h
+ gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
+
+ ## Include/Ppi/NvmExpressHostController.h
+ gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -405,14 +487,19 @@
# If developer need implement such functionality, they should use BasePeCoffLib.
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
- ## Print protocol defines basic print functions to print the format unicode and ascii string.
+ ## Print protocols define basic print functions to print the format unicode and ascii string.
# Include/Protocol/Print2.h
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
+ gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
## This protocol defines the generic memory test interfaces in Dxe phase.
# Include/Protocol/GenericMemoryTest.h
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
+ ## This protocol defines the Debugger Configuration interface.
+ # Include/Protocol/DebuggerConfiguration.h
+ gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
+
## Include/Protocol/Dpc.h
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
@@ -470,6 +557,9 @@
## Include/Protocol/BootLogo.h
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
+ # Include/Protocol/BootLogo2.h
+ gEdkiiBootLogo2ProtocolGuid = { 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } }
+
## Include/Protocol/DisplayProtocol.h
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
@@ -505,6 +595,28 @@
# Include/Protocol/Ps2Policy.h
gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
+ ## Include/Protocol/NonDiscoverableDevice.h
+ gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
+
+ ## Include/Protocol/IoMmu.h
+ gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
+
+ ## Include/Protocol/SmmMemoryAttribute.h
+ gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
+
+ ## Include/Protocol/SdMmcOverride.h
+ gEdkiiSdMmcOverrideProtocolGuid = { 0xeaf9e3c1, 0xc9cd, 0x46db, { 0xa5, 0xe5, 0x5a, 0x12, 0x4c, 0x83, 0x23, 0x23 } }
+
+ ## Include/Protocol/PlatformSpecificResetFilter.h
+ gEdkiiPlatformSpecificResetFilterProtocolGuid = { 0x695d7835, 0x8d47, 0x4c11, { 0xab, 0x22, 0xfa, 0x8a, 0xcc, 0xe7, 0xae, 0x7a } }
+ ## Include/Protocol/PlatformSpecificResetHandler.h
+ gEdkiiPlatformSpecificResetHandlerProtocolGuid = { 0x2df6ba0b, 0x7092, 0x440d, { 0xbd, 0x4, 0xfb, 0x9, 0x1e, 0xc3, 0xf3, 0xc1 } }
+
+ ## Include/Protocol/FirmwareManagementProgress.h
+ gEdkiiFirmwareManagementProgressProtocolGuid = { 0x1849bda2, 0x6952, 0x4e86, { 0xa1, 0xdb, 0x55, 0x9a, 0x3c, 0x47, 0x9d, 0xf1 } }
+
+ ## Include/Protocol/AtaAtapiPolicy.h
+ gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -750,7 +862,6 @@
# @Prompt Turn on PS2 Mouse Extended Verification
gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
-[PcdsFeatureFlag.X64]
## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
# On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
# which requires that all PCI MMIO BARs are located below 4 GB
@@ -817,6 +928,119 @@
# @ValidList 0x80000006 | 0x03058002
gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
+ ## Mask to control the NULL address detection in code for different phases.
+ # If enabled, accessing NULL address in UEFI or SMM code can be caught.
+ # BIT0 - Enable NULL pointer detection for UEFI.
+ # BIT1 - Enable NULL pointer detection for SMM.
+ # BIT2..5 - Reserved for future uses.
+ # BIT6 - Enable non-stop mode.
+ # BIT7 - Disable NULL pointer detection just after EndOfDxe.
+ # This is a workaround for those unsolvable NULL access issues in
+ # OptionROM, boot loader, etc. It can also help to avoid unnecessary
+ # exception caused by legacy memory (0-4095) access after EndOfDxe,
+ # such as Windows 7 boot on Qemu.
+ # @Prompt Enable NULL address detection.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask|0x0|UINT8|0x30001050
+
+ ## Init Value in Temp Stack to be shared between SEC and PEI_CORE
+ # SEC fills the full temp stack with this values. When switch stack, PeiCore can check
+ # this value in the temp stack to know how many stack has been used.
+ # @Prompt Init Value in Temp Stack
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInitValueInTempStack|0x5AA55AA5|UINT32|0x30001051
+
+ ## Indicates which type allocation need guard page.
+ #
+ # If a bit is set, a head guard page and a tail guard page will be added just
+ # before and after corresponding type of pages allocated if there's enough
+ # free pages for all of them. The page allocation for the type related to
+ # cleared bits keeps the same as ususal.
+ #
+ # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.
+ #
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)
+ # EfiReservedMemoryType 0x0000000000000001
+ # EfiLoaderCode 0x0000000000000002
+ # EfiLoaderData 0x0000000000000004
+ # EfiBootServicesCode 0x0000000000000008
+ # EfiBootServicesData 0x0000000000000010
+ # EfiRuntimeServicesCode 0x0000000000000020
+ # EfiRuntimeServicesData 0x0000000000000040
+ # EfiConventionalMemory 0x0000000000000080
+ # EfiUnusableMemory 0x0000000000000100
+ # EfiACPIReclaimMemory 0x0000000000000200
+ # EfiACPIMemoryNVS 0x0000000000000400
+ # EfiMemoryMappedIO 0x0000000000000800
+ # EfiMemoryMappedIOPortSpace 0x0000000000001000
+ # EfiPalCode 0x0000000000002000
+ # EfiPersistentMemory 0x0000000000004000
+ # OEM Reserved 0x4000000000000000
+ # OS Reserved 0x8000000000000000
+ # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.
+ # @Prompt The memory type mask for Page Guard.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType|0x0|UINT64|0x30001052
+
+ ## Indicates which type allocation need guard page.
+ #
+ # If a bit is set, a head guard page and a tail guard page will be added just
+ # before and after corresponding type of pages which the allocated pool occupies,
+ # if there's enough free memory for all of them. The pool allocation for the
+ # type related to cleared bits keeps the same as ususal.
+ #
+ # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.
+ #
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)
+ # EfiReservedMemoryType 0x0000000000000001
+ # EfiLoaderCode 0x0000000000000002
+ # EfiLoaderData 0x0000000000000004
+ # EfiBootServicesCode 0x0000000000000008
+ # EfiBootServicesData 0x0000000000000010
+ # EfiRuntimeServicesCode 0x0000000000000020
+ # EfiRuntimeServicesData 0x0000000000000040
+ # EfiConventionalMemory 0x0000000000000080
+ # EfiUnusableMemory 0x0000000000000100
+ # EfiACPIReclaimMemory 0x0000000000000200
+ # EfiACPIMemoryNVS 0x0000000000000400
+ # EfiMemoryMappedIO 0x0000000000000800
+ # EfiMemoryMappedIOPortSpace 0x0000000000001000
+ # EfiPalCode 0x0000000000002000
+ # EfiPersistentMemory 0x0000000000004000
+ # OEM Reserved 0x4000000000000000
+ # OS Reserved 0x8000000000000000
+ # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.
+ # @Prompt The memory type mask for Pool Guard.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
+
+ ## This mask is to control Heap Guard behavior.
+ #
+ # Note:
+ # a) Heap Guard is for debug purpose and should not be enabled in product
+ # BIOS.
+ # b) Due to the limit of pool memory implementation and the alignment
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot
+ # guarantee that the returned pool is exactly adjacent to head guard
+ # page or tail guard page.
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled
+ # at the same time.
+ #
+ # BIT0 - Enable UEFI page guard.
+ # BIT1 - Enable UEFI pool guard.
+ # BIT2 - Enable SMM page guard.
+ # BIT3 - Enable SMM pool guard.
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).
+ # BIT6 - Enable non-stop mode.
+ # BIT7 - The direction of Guard Page for Pool Guard.
+ # 0 - The returned pool is near the tail guard page.
+ # 1 - The returned pool is near the head guard page.
+ # @Prompt The Heap Guard feature mask
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask|0x0|UINT8|0x30001054
+
+ ## Indicates if UEFI Stack Guard will be enabled.
+ # If enabled, stack overflow in UEFI can be caught, preventing chaotic consequences.
+ # TRUE - UEFI Stack Guard will be enabled.
+ # FALSE - UEFI Stack Guard will be disabled.
+ # @Prompt Enable UEFI Stack Guard.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard|FALSE|BOOLEAN|0x30001055
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Dynamic type PCD can be registered callback function for Pcd setting action.
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
@@ -829,23 +1053,10 @@
# @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
- ## Maximum number of FV is supported by PeiCore's dispatching.
- # @Prompt Maximum number of FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
-
- ## Maximum File count in every FV is supported by PeiCore's dispatching.
- # PeiCore supported File type includes PEIM, Combined PEIM and FV.
- # @Prompt Maximum File count per FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
-
## Maximum stack size for PeiCore.
# @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
- ## Maximum PPI count is supported by PeiCore's PPI database.
- # @Prompt Maximum PPI count supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
-
## The maximum size of a single non-HwErr type variable.
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
@@ -855,6 +1066,14 @@
# @Prompt Maximum authenticated variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
+ ## The maximum size of a single non-authenticated volatile variable.
+ # The default value is 0 for compatibility: in that case, the maximum
+ # non-authenticated volatile variable size remains specified by
+ # PcdMaxVariableSize. Only the MdeModulePkg/Universal/Variable/RuntimeDxe
+ # driver supports this PCD.
+ # @Prompt Maximum non-authenticated volatile variable size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVolatileVariableSize|0x00|UINT32|0x3000000a
+
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
@@ -1018,6 +1237,12 @@
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
+ ## The mask is used to control SmiHandlerProfile behavior.
+ # BIT0 - Enable SmiHandlerProfile.
+ # @Prompt SmiHandlerProfile Property.
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
+
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.
# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.
#
@@ -1059,6 +1284,54 @@
# @Prompt Memory profile driver path.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
+ ## Set image protection policy. The policy is bitwise.
+ # If a bit is set, the image will be protected by DxeCore if it is aligned.
+ # The code section becomes read-only, and the data section becomes non-executable.
+ # If a bit is clear, nothing will be done to image code/data sections.
+ # BIT0 - Image from unknown device.
+ # BIT1 - Image from firmware volume.
+ #
+ # Note: If a bit is cleared, the data section could be still non-executable if
+ # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData
+ # and/or EfiRuntimeServicesData.
+ #
+ # @Prompt Set image protection policy.
+ # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
+
+ ## Set DXE memory protection policy. The policy is bitwise.
+ # If a bit is set, memory regions of the associated type will be mapped
+ # non-executable.
+ # If a bit is cleared, nothing will be done to associated type of memory.
+ #
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)
+ # EfiReservedMemoryType 0x0001
+ # EfiLoaderCode 0x0002
+ # EfiLoaderData 0x0004
+ # EfiBootServicesCode 0x0008
+ # EfiBootServicesData 0x0010
+ # EfiRuntimeServicesCode 0x0020
+ # EfiRuntimeServicesData 0x0040
+ # EfiConventionalMemory 0x0080
+ # EfiUnusableMemory 0x0100
+ # EfiACPIReclaimMemory 0x0200
+ # EfiACPIMemoryNVS 0x0400
+ # EfiMemoryMappedIO 0x0800
+ # EfiMemoryMappedIOPortSpace 0x1000
+ # EfiPalCode 0x2000
+ # EfiPersistentMemory 0x4000
+ # OEM Reserved 0x4000000000000000
+ # OS Reserved 0x8000000000000000
+ #
+ # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode.
+ # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory.
+ #
+ # e.g. 0x7FD5 can be used for all memory except Code.
+ # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved.
+ #
+ # @Prompt Set DXE memory protection policy.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
+
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
# information that describes the path that contains zero or more PCI to PCI briges
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
@@ -1143,6 +1416,76 @@
# @Prompt MAX repair count
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
+ ## Status Code for Capsule subclass definitions.
+ # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule subclass definitions
+ # @ValidList 0x80000003 | 0x00810000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
+
+ ## Status Code for Capsule Process Begin.
+ # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Process Begin
+ # @ValidList 0x80000003 | 0x00008001
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
+
+ ## Status Code for Capsule Process End.
+ # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Process End
+ # @ValidList 0x80000003 | 0x00008002
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
+
+ ## Status Code for Capsule Process Updating Firmware.
+ # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Process Updating Firmware
+ # @ValidList 0x80000003 | 0x00008003
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
+
+ ## Status Code for Capsule Process Update Firmware Success.
+ # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Process Update Firmware Success
+ # @ValidList 0x80000003 | 0x00008004
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
+
+ ## Status Code for Capsule Process Update Firmware Failed.
+ # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Process Update Firmware Failed
+ # @ValidList 0x80000003 | 0x00008005
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
+
+ ## Status Code for Capsule Resetting System.
+ # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.
+ # Override the value of this PCD in the platform DSC file as needed.
+ # @Prompt Status Code for Capsule Resetting System
+ # @ValidList 0x80000003 | 0x00008006
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
+
+ ## CapsuleMax value in capsule report variable.
+ # @Prompt CapsuleMax value in capsule report variable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
+
+ ## Control which FPDT record format will be used to store the performance entry.
+ # On TRUE, the string FPDT record will be used to store every performance entry.
+ # On FALSE, the different FPDT record will be used to store the different performance entries.
+ # @Prompt String FPDT Record Enable Only
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEdkiiFpdtStringRecordEnableOnly|FALSE|BOOLEAN|0x00000109
+
+ ## Indicates the allowable maximum number of Reset Filters, Reset Notifications or Reset Handlers in PEI phase.
+ # @Prompt Maximum Number of PEI Reset Filters, Reset Notifications or Reset Handlers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaximumPeiResetNotifies|0x10|UINT32|0x0000010A
+
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
@@ -1427,7 +1770,7 @@
## SMBIOS version.
# @Prompt SMBIOS version.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0302|UINT16|0x00010055
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
@@ -1442,7 +1785,7 @@
## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
# the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
# @Prompt Pad size for extension FPDT boot records.
- gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x20000|UINT32|0x0001005F
## Indicates if ConIn device are connected on demand.
# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
@@ -1552,8 +1895,13 @@
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
# IA32 PAE is supported and Execute Disable Bit is available.
- # TRUE - to set NX for stack.
- # FALSE - Not to set NX for stack.
+ #
+ # TRUE - Set NX for stack.
+ # FALSE - Do nothing for stack.
+ #
+ # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for
+ # EfiBootServicesData.
+ #
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
@@ -1570,7 +1918,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
## Specify memory size for boot script executor stack usage in S3 phase.
- # The default size 32K. When changing the value make sure the memory size is large enough
+ # The default size 32K. When changing the value make sure the memory size is large enough
# to meet boot script executor requirement in the S3 phase.
# @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
@@ -1582,6 +1930,24 @@
# @Prompt Enable fast PS2 detection
gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
+ ## This is recover file name in PEI phase.
+ # The file must be in the root directory.
+ # The file name must be the 8.3 format.
+ # The PCD data must be in UNICODE format.
+ # @Prompt Recover file name in PEI phase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
+
+ ## This PCD hold a list GUIDs for the ImageTypeId to indicate the
+ # FMP capsule is a system FMP.
+ # @Prompt A list of system FMP ImageTypeId GUIDs
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
+
+ ## This PCD holds the address mask for page table entries when memory encryption is
+ # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
+ # This mask should be applied when creating 1:1 virtual to physical mapping tables.
+ # @Prompt The address mask when memory encryption is enabled.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
@@ -1628,11 +1994,28 @@
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
- # Virtual to Physical mapping according to the processor physical address bits.
- # @Prompt Identify Mapping Page Table pointer.
- # @ValidList 0x80000001 | 0x0
- gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
+ ## This dynamic PCD holds the information if there is any test key used by the platform.
+ # @Prompt If there is any test key used by the platform.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
+
+[PcdsDynamicEx]
+ ## This dynamic PCD enables the default variable setting.
+ # Its value is the default store ID value. The default value is zero as Standard default.
+ # When its value is set in PEI, it will trig the default setting to be applied as the default EFI variable.
+ # @Prompt NV Storage DefaultId
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNvStoreDefaultId|0x0|UINT16|0x00030004
+
+ ## This dynamic PCD holds the DynamicHii PCD value. Its value is the auto generated.
+ # @Prompt NV Storage Default Value Buffer
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
+
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64
+ # to store PCD value. It will be DynamicExDefault only.
+ # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is
+ # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.
+ # It can't depend on EFI variable service, and can't be DynamicExHii PCD.
+ # @Prompt 64bit VPD base address.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006
[UserExtensions.TianoCore."ExtraFiles"]
MdeModulePkgExtra.uni