X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=41b9e70a1ac885b94c6a1df13160c9fe36f11f39;hb=46f6752834abf1a6264b351170bd65f2e4e7c0d9;hp=2dee139ba3b0ae45f41a8ac56b54407efc99121f;hpb=cf78c9d18a81cb289fe1bfaebf07c164da6c520f;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 2dee139ba3..41b9e70a1a 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -5,7 +5,7 @@
#
# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
-# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
+# (C) Copyright 2016 - 2019 Hewlett Packard Enterprise Development LP
# Copyright (c) 2017, AMD Incorporated. All rights reserved.
# Copyright (c) 2016, Microsoft Corporation
# SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -31,16 +31,6 @@
## @libraryclass Defines a set of helper functions for resetting the system.
ResetUtilityLib|Include/Library/ResetUtilityLib.h
- ## @libraryclass Defines a set of methods related do S3 mode.
- # This library class is no longer used and modules using this library should
- # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
- S3Lib|Include/Library/S3Lib.h
-
- ## @libraryclass Defines a set of methods related recovery mode.
- # This library class is no longer used and modules using this library should
- # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
- RecoveryLib|Include/Library/RecoveryLib.h
-
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
@@ -305,16 +295,6 @@
## Include/Guid/PlatDriOverrideHii.h
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
- ## Include/Guid/Ip4Config2Hii.h
- gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
-
- ## Include/Guid/VlanConfigHii.h
- gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
-
- ## Include/Guid/Ip4IScsiConfigHii.h
- gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
- gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
-
## Include/Guid/ZeroGuid.h
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
@@ -352,6 +332,10 @@
## Include/Guid/TtyTerm.h
gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
+ gEdkiiLinuxTermGuid = { 0xe4364a7f, 0xf825, 0x430e, {0x9d, 0x3a, 0x9c, 0x9b, 0xe6, 0x81, 0x7c, 0xa5 }}
+ gEdkiiXtermR6Guid = { 0xfbfca56b, 0xbb36, 0x4b78, {0xaa, 0xab, 0xbe, 0x1b, 0x97, 0xec, 0x7c, 0xcb }}
+ gEdkiiVT400Guid = { 0x8e46dddd, 0x3d49, 0x4a9d, {0xb8, 0x75, 0x3c, 0x08, 0x6f, 0x6a, 0xa2, 0xbd }}
+ gEdkiiSCOTermGuid = { 0xfc7dd6e0, 0x813c, 0x434d, {0xb4, 0xda, 0x3b, 0xd6, 0x49, 0xe9, 0xe1, 0x5a }}
## Include/Guid/HiiBootMaintenanceFormset.h
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
@@ -399,6 +383,9 @@
## Include/Guid/SerialPortLibVendor.h
gEdkiiSerialPortLibVendorGuid = { 0xD3987D4B, 0x971A, 0x435F, { 0x8C, 0xAF, 0x49, 0x67, 0xEB, 0x62, 0x72, 0x41 } }
+ ## GUID indicates the capsule is to store Capsule On Disk file names.
+ gEdkiiCapsuleOnDiskNameGuid = { 0x98c80a4f, 0xe16b, 0x4d11, { 0x93, 0x9a, 0xab, 0xe5, 0x61, 0x26, 0x3, 0x30 } }
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -469,6 +456,13 @@
## Include/Ppi/Debug.h
gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
+ ## Include/Ppi/NvmExpressPassThru.h
+ gEdkiiPeiNvmExpressPassThruPpiGuid = { 0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
+
+ ## Include/Ppi/CapsuleOnDisk.h
+ gEdkiiPeiCapsuleOnDiskPpiGuid = { 0x71a9ea61, 0x5a35, 0x4a5d, { 0xac, 0xef, 0x9c, 0xf8, 0x6d, 0x6d, 0x67, 0xe0 } }
+ gEdkiiPeiBootInCapsuleOnDiskModePpiGuid = { 0xb08a11e4, 0xe2b7, 0x4b75, { 0xb5, 0x15, 0xaf, 0x61, 0x6, 0x68, 0xbf, 0xd1 } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -489,9 +483,6 @@
# Include/Protocol/DebuggerConfiguration.h
gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
- ## Include/Protocol/Dpc.h
- gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
-
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
@@ -558,6 +549,9 @@
## Include/Protocol/UfsHostController.h
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
+ ## Include/Protocol/UfsHostControllerPlatform.h
+ gEdkiiUfsHcPlatformProtocolGuid = { 0x3d18ba13, 0xd9b1, 0x4dd4, {0xb9, 0x16, 0xd3, 0x07, 0x96, 0x53, 0x9e, 0xd8}}
+
## Include/Protocol/EsrtManagement.h
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
@@ -590,6 +584,11 @@
## Include/Protocol/IoMmu.h
gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
+ ## Include/Protocol/DeviceSecurity.h
+ gEdkiiDeviceSecurityProtocolGuid = { 0x5d6b38c8, 0x5510, 0x4458, { 0xb4, 0x8d, 0x95, 0x81, 0xcf, 0xa7, 0xb0, 0xd } }
+ gEdkiiDeviceIdentifierTypePciGuid = { 0x2509b2f1, 0xa022, 0x4cca, { 0xaf, 0x70, 0xf9, 0xd3, 0x21, 0xfb, 0x66, 0x49 } }
+ gEdkiiDeviceIdentifierTypeUsbGuid = { 0x7394f350, 0x394d, 0x488c, { 0xbb, 0x75, 0xc, 0xab, 0x7b, 0x12, 0xa, 0xc5 } }
+
## Include/Protocol/SmmMemoryAttribute.h
gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
@@ -647,6 +646,18 @@
# @Prompt Enable Device Path From Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
+ ## Indicates if the UEFI variable runtime cache should be enabled.
+ # This setting only applies if SMM variables are enabled. When enabled, all variable
+ # data for Runtime Service GetVariable () and GetNextVariableName () calls is retrieved
+ # from a runtime data buffer referred to as the "runtime cache". An SMI is not triggered
+ # at all for these requests. Variables writes still trigger an SMI. This can greatly
+ # reduce overall system SMM usage as most boots tend to issue far more variable reads
+ # than writes.
+ # TRUE - The UEFI variable runtime cache is enabled.
+ # FALSE - The UEFI variable runtime cache is disabled.
+ # @Prompt Enable the UEFI variable runtime cache.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache|TRUE|BOOLEAN|0x00010039
+
## Indicates if the statistics about variable usage will be collected. This information is
# stored as a vendor configuration table into the EFI system table.
# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
@@ -1128,10 +1139,6 @@
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
- ## RTC Update Timeout Value(microsecond).
- # @Prompt RTC Update Timeout Value.
- gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
-
## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.
# TRUE - 16550 serial port registers are in MMIO space.
# FALSE - 16550 serial port registers are in I/O space.
@@ -1191,12 +1198,6 @@
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
- ## This setting can override the default TFTP block size. A value of 0 computes
- # the default from MTU information. A non-zero value will be used as block size
- # in bytes.
- # @Prompt TFTP block size.
- gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
-
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
# structure. The default value for this PCD is 0, which means that the DXE Core
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
@@ -1478,6 +1479,22 @@
# @Prompt Maximum Number of PEI Reset Filters, Reset Notifications or Reset Handlers.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaximumPeiResetNotifies|0x10|UINT32|0x0000010A
+ ## Capsule On Disk is to deliver capsules via files on Mass Storage device.
+ # This PCD indicates if the Capsule On Disk is supported.
+ # TRUE - Capsule On Disk is supported.
+ # FALSE - Capsule On Disk is not supported.
+ # If platform does not use this feature, this PCD should be set to FALSE.
+ # Two sulotions to deliver Capsule On Disk:
+ # a) If PcdCapsuleInRamSupport = TRUE, Load Capsule On Disk image out of TCB, and reuse
+ # Capsule In Ram to deliver capsule.
+ # b) If PcdCapsuleInRamSupport = FALSE, Relocate Capsule On Disk image to RootDir out
+ # of TCB, and reuse FatPei to load capsules from external storage.
+ # Note:
+ # If Both Capsule In Ram and Capsule On Disk are provisioned at the same time, the Capsule
+ # On Disk will be bypassed.
+ # @Prompt Enable Capsule On Disk support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleOnDiskSupport|FALSE|BOOLEAN|0x0000002d
+
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
@@ -1640,6 +1657,12 @@
# @Prompt Reset on memory type information change.
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
+ ## Indicates if the BDS supports Platform Recovery.
+ # TRUE - BDS supports Platform Recovery.
+ # FALSE - BDS does not support Platform Recovery.
+ # @Prompt Support Platform Recovery.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformRecoverySupport|TRUE|BOOLEAN|0x00010078
+
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
# Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
@@ -1770,7 +1793,7 @@
## SMBIOS version.
# @Prompt SMBIOS version.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0302|UINT16|0x00010055
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0303|UINT16|0x00010055
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
@@ -1937,6 +1960,17 @@
# @Prompt Recover file name in PEI phase
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
+ ## This is Capsule Temp Relocation file name in PEI phase.
+ # The file must be in the root directory.
+ # The file name must be the 8.3 format.
+ # The PCD data must be in UNICODE format.
+ # CapsuleOnDiskLoadPei PEI module will set value of this PCD to PcdRecoveryFileName, then
+ # leverage recovery to get Capsule On Disk Temp Relocation file.
+ # Note: The file name must be shorter than PcdRecoveryFileName, otherwise CapsuleOnDiskLoadPei
+ # PEI module will fail to get Capsule On Disk Temp Relocation file.
+ # @Prompt Capsule On Disk Temp Relocation file name in PEI phase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCoDRelocationFileName|L"Cod.tmp"|VOID*|0x30001048
+
## This PCD hold a list GUIDs for the ImageTypeId to indicate the
# FMP capsule is a system FMP.
# @Prompt A list of system FMP ImageTypeId GUIDs
@@ -1948,6 +1982,27 @@
# @Prompt The address mask when memory encryption is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
+ ## Indicates if 5-Level Paging will be enabled in long mode. 5-Level Paging will not be enabled
+ # when the PCD is TRUE but CPU doesn't support 5-Level Paging.
+ # TRUE - 5-Level Paging will be enabled.
+ # FALSE - 5-Level Paging will not be enabled.
+ # @Prompt Enable 5-Level Paging support in long mode.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUse5LevelPageTable|FALSE|BOOLEAN|0x0001105F
+
+ ## Capsule In Ram is to use memory to deliver the capsules that will be processed after system
+ # reset.
+ # This PCD indicates if the Capsule In Ram is supported.
+ # TRUE - Capsule In Ram is supported.
+ # FALSE - Capsule In Ram is not supported.
+ # @Prompt Enable Capsule In Ram support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleInRamSupport|TRUE|BOOLEAN|0x0000002e
+
+ ## Full device path of plaform specific device to store Capsule On Disk temp relocation file.
+ # If this PCD is set, Capsule On Disk temp relocation file will be stored in the device specified
+ # by this PCD, instead of the EFI System Partition that stores capsule image file.
+ # @Prompt Capsule On Disk relocation device path.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCodRelocationDevPath|{0xFF}|VOID*|0x0000002f
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.