X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=5ec37c5a7d056d5809d5e8c4e1e22f07ca217909;hb=bd69e72c8abee5a155d0281b392459dfa7837e8a;hp=5d3258d02041ecbd71648cfae6c19807496c15c7;hpb=ba529e7e5a78e8f20916e1ead53b47a68ac46118;p=mirror_edk2.git

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 5d3258d020..5ec37c5a7d 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -331,6 +331,9 @@
 
   ## Include/Guid/HiiBootMaintenanceFormset.h
   gEfiIfrBootMaintenanceGuid      = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
+
+  gEfiIfrFrontPageGuid        = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
+
   
 [Ppis]
   ## Include/Ppi/AtaController.h
@@ -464,6 +467,9 @@
   ## Include/Protocol/PlatformLogo.h
   gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
 
+  ## Include/Protocol/FileExplorer.h
+  gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
+
 #
 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
 #   0x80000001 | Invalid value provided.
@@ -680,6 +686,12 @@
   # @Prompt Enable S3 performance data support.
   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 
+  ## Indicates if Serial device uses half hand shake.<BR><BR>
+  #   TRUE  - Serial device uses half hand shake.<BR>
+  #   FALSE - Serial device doesn't use half hand shake.<BR>
+  # @Prompt Enable Serial device Half Hand Shake
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
+
 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
   ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
   #  It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
@@ -965,6 +977,38 @@
   # @Prompt Pci Serial Device Info
   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
 
+  ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
+  #  BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that 
+  #  describes the parameters of special PCI serial devices.
+  #  Each array entry is 24-byte in length. The array is terminated
+  #  by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
+  #  standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
+  #  The C style structure is defined as below:
+  #  typedef struct {
+  #    UINT16  VendorId;          ///< Vendor ID to match the PCI device.  The value 0xFFFF terminates the list of entries.
+  #    UINT16  DeviceId;          ///< Device ID to match the PCI device
+  #    UINT32  ClockRate;         ///< UART clock rate.  Set to 0 for default clock rate of 1843200 Hz
+  #    UINT64  Offset;            ///< The byte offset into to the BAR
+  #    UINT8   BarIndex;          ///< Which BAR to get the UART base address
+  #    UINT8   RegisterStride;    ///< UART register stride in bytes.  Set to 0 for default register stride of 1 byte.
+  #    UINT16  ReceiveFifoDepth;  ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+  #    UINT16  TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+  #    UINT8   Reserved[2];
+  #  } PCI_SERIAL_PARAMETER;
+  #  It contains zero or more instances of the above structure.
+  #  For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
+  #  to contain  two instances of the above structure, with the VendorId and DeviceId
+  #  equals to the Device ID and Vendor ID of the device; If the PCI device uses the
+  #  first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
+  #  BarIndex of second one equals to 1; If the PCI device uses the first BAR to
+  #  support both UARTs, BarIndex of both instance equals to 0, Offset of first
+  #  instance equals to 0 and Offset of second one equals to a value bigger than or
+  #  equal to 8.
+  #  For certain UART whose register needs to be accessed in DWORD aligned address,
+  #  RegisterStride equals to 4.
+  # @Prompt Pci Serial Parameters
+  gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
+
   ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes. 
   # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068